Upload
votruc
View
223
Download
2
Embed Size (px)
Citation preview
All dimensions in mm 2.1
Narrow Stile Mortice Locks
2000/2100/2200 Series
This comprehensive selection of pivoting bolt deadlocks is designed to suit narrow stile hinged and sliding doors.
The 2000 Series encompasses deadlocks with 22mm and 36mm bolt projection, together with a specific sliding door lock, featuring a vee-cut bolt for secure locking. The sliding door deadlocks are suitable for both door stile and door jamb mounting.
With positive deadbolt action, the 2000 Series is recommended for use on aluminium commercial doors, where there is only a limited area (narrow stile) for lockset installation.
Door Thickness - 28mm – 58mm
Keying - 6 pin timber cylinder C4 keyway
Backset - 23mm
Handing - can be changed on site
Material - Deadbolt heavy duty steel
- Case Zinc plated steel
2000 Series Cylinder Mortice Deadlock Short Throw
• Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged and pivot doors with standard jamb.
• The deadlock has a 22mm deadbolt projection and a positive deadlocking action.
CA
5/10 years
2100 Series Cylinder Mortice Deadlock Long Throw
• Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged and pivoted double doors.
• The deadlock has a 36mm deadbolt projection and a positive deadlocking action.
CA
5/10 years
2200 Series Cylinder Mortice Sliding Door Deadlock
• Narrow stile sliding door deadlock with a vee-cut deadbolt for positive engagement in strike when locked.
• The deadlock has a 29mm deadbolt projection.
CA
5/10 years
All dimensions in mm2.2
Narrow Stile Mortice Locks
2000/2100/2200 Series
Keying Information
6 pin tumbler system supplied in the standard broach, keyed to differ with two keys per lock. Special keying is available.
All Gainsborough locks come with brass keys. Standard keyed differently (KD) unless otherwise specified.
Locks can be keyed alike, master keyed, grand master keyed, maison keyed or project keyed – refer to page vi in Introduction section for details.
Keying Codes
KA Keyed Alike
MK Master Keyed
GMK Grand Master Keyed
GGMK Great Grand Master Keyed
MA Maison Keyed
PK Project Keyed
PMK Project Master Keyed
Product InformationOutside of door is on left hand side of illustration – All locks are non-handed.
Series Function Selection Chart
2000 Series
2100 Series
2200 Series
2012 2011 2010 2002
2112 2111 2110 2102
2212 2211 2210 2202
All dimensions in mm 2.3
Narrow Stile Mortice Locks
2000/2100 Cylinder Deadlocks
Finish
Clear Anodised.
Deadbolt
For 2000 series – 22mm projection. For 2100 series – 36mm projection.
Backset
23mm.
Special Keying
Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed – refer to page vi in Introduction section for details.
2000 Series Cylinder Mortice Deadlock Short Throw
Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged door applications.
The deadlock has a 22mm deadbolt projection and a positive deadlocking action.
2100 Series Cylinder Mortice DeadlockLong Throw
Featuring a pivoting deadbolt action, this narrow stile deadlock is designed for hinged door applications.
The deadlock has a 36mm deadbolt projection and a positive deadlocking action.
23
37
182
3252
22
36
156
35 53
25
928
Limiting Dimensions
All dimensions in mm2.4
Narrow Stile Mortice Locks
2000/2100 Cylinder Deadlocks
Product Description Catalogue No.
Cylinder and Turnbutton Reversible
22mm bolt projection. 2012
36mm bolt projection. 2112
Key outside locks and unlocks.
Turnbutton inside locks and unlocks.
Non-handed.
Double Cylinder Reversible
22mm bolt projection. 2011
36mm bolt projection. 2111
Key either side locks and unlocks.
Non-handed.
Single Cylinder Reversible
22mm bolt projection. 2010
36mm bolt projection. 2110
Cylinder can be installed either side.
Key locks and unlocks.
Non-handed.
Single Turnbutton Reversible
22mm bolt projection. 2002
36mm bolt projection. 2102
Turnbutton can be installed on either side.
Turnbutton locks and unlocks.
Non-handed.
2000/2100 Series Mortice Cylinder Deadlocks
2012 2112
2011 2111
2010 2110
2002 2102
All dimensions in mm 2.5
Narrow Stile Mortice Locks
2200 Series Sliding Door Deadlock
Finish
Clear Anodised.
Deadbolt
Vee-cut for positive locking, 29mm projection.
Backset
23mm.
Special Keying
Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed – refer to page vi in Introduction section for details.
2200 Series Cylinder Mortice Sliding Door DeadlockNarrow stile sliding door deadlock with a vee-cut deadbolt for positive engagement in strike when locked. The deadlock has a 29mm deadbolt projection.
23
37
182
3252
22
29
156
35 53
25
928
Limiting Dimensions
All dimensions in mm2.6
Narrow Stile Mortice Locks
2200 Series Sliding Door Deadlock
Product Description Catalogue No.
Cylinder and Turnbutton Reversible
29mm bolt projection. 2212
Key outside locks and unlocks.
Turnbutton inside locks and unlocks.
Non-handed.
Double Cylinder Reversible
29mm bolt projection. 2211
Key either side locks and unlocks.
Non-handed.
Single Cylinder Reversible
29mm bolt projection. 2210
Cylinder can be installed either side.
Key locks and unlocks.
Single Turnbutton Reversible
29mm bolt projection. 2202
Turnbutton can be installed on either side.
Turnbutton locks and unlocks.
2212
2211
2210
2202
2200 Series Cylinder Mortice Sliding Door Deadlock
All dimensions in mm 2.7
Narrow Stile Mortice Locks
2000 Series Accessories
Accessories for 2000 Series Narrow Stile Mortice Locks
2000/FP01
• Faceplate for timber door to suit
2000/2100/2200 Series.
Faceplate Latching Strike
2200/SP01
• Latching Strike to suit Sliding Door Deadlock
(for aluminium door).
2200/SP02
• Timber faceplate to suit latching strike box
(for conversion to timber doors).
All dimensions in mm 2.9
Narrow Stile Mortice Locks
2400/2500/2600 Series
Gainsborough’s range of Heavy Duty Mortice Locks and Latches has been designed and manufactured in Australia, providing security, aesthetics and reliability specifically for the commercial/residential market.
Featuring a wide variety of locking and latching functions in a totally different body design, Gainsborough can meet with the most stringent of security solutions in the Australian market.
Door Thickness - 32mm – 50mm
Keying - 6 pin timber cylinder C4 keyway
Backset - 23mm (2000)
- 25mm (4400)
Handing - can be changed on site
Material - Case Zinc alloy with nickle plate finish
- Latch Sintered stainless steel 14mm
- Positive deadlatching up to 10mm
2400 Series Cylinder Mortice Vestibule Lock
• Functions of vestibule with cylinders or turnbuttons.
• Inside handle always free for exit.
• Deadlatched upon closing of door.
• Can be used with electric strikes.
• With kick off/anti-lockout.
SS
S2 D3
5/10 years
2500 Series Cylinder Mortice Combination Locking Latch
• Handles operated both sides by a series of cylinders or turnbuttons.
• Handles locked both sides.
• Deadlatched upon closing of door.
• Can be used with electric strikes.
• With kick off/anti-lockout.
SS
S2 D3
5/10 years
2600 Series Cylinder Mortice Passage Latch
• Passage latch function.
• Handles locked both sides.
• With kick off/anti-lockout function.
SS
5/10 years
All dimensions in mm2.10
Narrow Stile Mortice Locks
2400/2500/2600 Series
Applications Latchbolts
Latchbolts are 14mm. Sintered Stainless Steel for latching type locks & latches and feature an auxiliary bolt which deadlatches the main latchbolt upon closing of the door.
Latchbolt and auxiliary deadlatch bolt can be reversed easily for doors opening in or out.
Door Clearance
To maintain lock security and facilitate correct latch retraction, clearance between door and frame should be 2.5mm–4mm.
Product Information
1. Lock Cylinder below Hub Assembly.
2. 7.65mm Split Hub Assembly.
3. Multi Function Lock Slide
4. Stainless Steel Latchbolt 14mm
5. Stainless Steel Auxiliary Deadlatch 14mm
6. Stainless Steel Universal Anti-Rattle Strike
7. Stainless Steel Faceplate
8. Tamper Resistant Cylinder Aperture
9. Zinc Alloy Case
10. Field Selectable Kick Off.
4.
5.
7.
1.
9.
8.
10.
2.
3.
6.
Cylinders
Oval cylinders are in Gainsborough mortice locks and can be interchanged with other specially keyed cylinders.
Cylinders can be supplied with or without the lock. Gainsborough C4/6 pin standard profile, straight six restricted profile.
Electric Strikes
The Gainsborough 2000 & 3000 Series Mortice Lock suits the Gainsborough ES1000SS Electric Strike.
Multi Function
Multi function is achieved by simply pressing a button & holding down locking bar thus changing the lock from combination function (both lever/knobs locked on outside & inside of case) to vestibule function (one lever/knob locked with the other lever/knob operable at all times, normally for egress).
Lock case does not need to be disassembled to achieve either of the above functions.
Electric Strike
ES1000/24SS (24 Volt) Non-Monitored
ES1000/12SS (12 Volt) Non-Monitored
ES1000/24MSS (24 Volt) Monitored
ES1000/12MSS (12 Volt) Monitored
Cylinder pin
1. Make sure GREEN can be seen in the square window. IF GREEN IS NOT SEEN, press the Locking Bar in the cylinder hole below.
2. Use a cylinder pin to press and hold down the button in the Bottom Round Window and at the same time do 3.
3. Press Locking Bar with finger.
All dimensions in mm 2.11
Narrow Stile Mortice Locks
2400/2500/2600 Series
2400 Series Vestibule Mortice Deadlatch
24JAAL24JA 24CO24KO24OV24CV24VO24KA
24EO24OA24CA24VV
2500 Series Combination Locking Deadlatch
25JAAL25JA 25VV25EA25CV25VO25KA 25OA
25CA 25OV
2600 Series Passage Latch
2600
Series Function Selection ChartOutside of door is on the left hand side of illustration - All locks are non-handed.
All dimensions in mm2.12
Narrow Stile Mortice Locks
2400/2500/2600 Series
Finishes
SS Stainless Steel.
When ordering, add relevant finish code to form complete catalogue number.
Latchbolt
14mm Standard latchbolt.
Backsets Available
23mm.
Special Keying
Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial and residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed – refer to page viii in Introduction section for details.
Vestibule Mortice Locks and Latches. Available in a range of functions for egress application.
Lock automatically deadlatches when door is closed.
155.8176
45
28
23
39.525.2
2000/SB01STRIKE BOX
20
3.0
70 5433
13 28
100
14
R 3.0
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29
20
47
Limiting Dimensions
All dimensions in mm 2.13
Narrow Stile Mortice Locks
2400 Series Vestibule Lock
2400 Series Mortice Vestibule Deadlatching Locks
Product Description Catalogue No.
Entrance Office Lock Cylinder and Turnbutton.
Latchbolt operated by handles either side. 24JA Outside handle is locked or unlocked by either key from outside or turnbutton inside.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Stair Lock with Anti-Lockout Cylinder and Turnbutton.
Latchbolt operated by handles either side. 24JAAL Outside handle is locked or unlocked by either key from outside or turnbutton inside, but only when door is closed. Latching of door will cause unlocking of outside handle as kick-off function applies.
Inside handle always free for immediate exit. Operation of handle inside also kicks-off outside handle, unlocking door.
Auxiliary bolt deadlatches when door is closed.
Entrance Office lock Cylinder and Turnbutton.(With dual function) Latchbolt operated by handles either side. 24KA Outside handle is locked or unlocked by either key from outside or turnbutton inside.
Key from outside can be rotated either way, thus retracts latchbolt or unlocks outside handle. (A counter action for vandalism to outside handle).
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Classroom Lock Single Cylinder Cylinder Outside.(With dual function) Latchbolt operated by handles either side. 24KO
Outside handle is locked or unlocked by key from outside.*
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
*Key outside can be rotated either way, thus retracts latchbolt or unlocks outside handle.
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 24JA SS
All dimensions in mm2.14
Narrow Stile Mortice Locks
2400 Series Vestibule Lock
2400 Series Mortice Vestibule Deadlatching Locks
Product Description Catalogue No.
Classroom Lock Cylinder Outside.
Latchbolt operated by handles either side. 24VO Outside handle is locked or unlocked by key from outside.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Exit Lock Double Cylinder Double Cylinder.
Latchbolt operated by handles either side. 24CV Outside handle is locked or unlocked by key from inside. Key outside retracts latchbolt.
Inside handle is always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Exit Lock Single Cylinder Cylinder Inside.
Latchbolt operated by handles either side. 24OV Outside handle is locked or unlocked by key from inside.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Entry & Storeroom Door Cylinder Outside.
Key outside retracts latchbolt. 24CO Outside handle is rigid at all times.
Inside handle always free for immediate exit.
Ideal for use with electric strike (ES1000 12 or 24 volt).
Auxiliary bolt automatically deadlatches when door is closed.
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 24CV SS
All dimensions in mm 2.15
Narrow Stile Mortice Locks
2400 Series Vestibule Lock
2400 Series Mortice Vestibule Deadlatching Locks
Product Description Catalogue No.
Double Cylinder Double Cylinder.
Latchbolt operated by handles either side. 24VV Outside handle is locked or unlocked by key from both sides.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Entrance Office Lock Cylinder and Turnbutton.
Latchbolt operated by handles either side. 24CA Outside handle is locked or unlocked by turnbutton inside. Key outside retracts latchbolt.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Exit Latch Turnbutton Inside.
Latchbolt operated by handles either side. 24OA Outside handle is locked or unlocked by turnbutton inside.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Exit Latch No Cylinder or Turnbutton.
Latchbolt operated by handle inside only. 24EO No outside handle.
Inside handle always free for immediate exit.
Auxiliary bolt automatically deadlatches when door is closed.
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 24CA PS
All dimensions in mm2.16
Narrow Stile Mortice Locks
Finishes
SS Stainless Steel.
When ordering, add relevant finish code to form complete catalogue number.
Latchbolt
14mm Standard latchbolt.
Backsets Available
23mm.
Special Keying
Each locking function can be specially keyed in a Gainsborough 6 pin tumbler system to meet the needs of commercial or residential building requirements. Locks can be keyed alike, master keyed, grand master keyed, maison keyed and project keyed – refer to page vi in Introduction section for details.
Combination Locks and Latches.Available in a range of funcions for entry doors where egress is not is not required.
Knob or snib locks both inside and outside handles/knobs.
Locks are deadlatched upon closing of door.
155.8176
45
28
23
39.525.2
2000/SB01STRIKE BOX
20
3.0
70 5433
13 28
100
14
R 3.0
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29
20
47
Limiting Dimensions
2500 Series Combination Lock
All dimensions in mm 2.17
Narrow Stile Mortice Locks
2500 Series Combination Lock
2500 Series Mortice Combination Locks
Product Description Catalogue No.
Office Locking Latch Cylinder and Turnbutton.
Latchbolt operated by handles either side. 25JA Both handles are locked or unlocked by either key from outside or turnbutton inside.
Auxiliary bolt automatically deadlatches when door is closed.
Stair Lock with Anti-Lockout Cylinder and Turnbutton.
Latchbolt operated by handles either side. 25JAAL Outside handle is locked or unlocked by either key from outside or turnbutton inside, but only when door is closed. Latching of door will cause unlocking of outside handle as kick-off function applies.
Inside handle always free for immediate exit. Operation of handle inside also kicks-off outside handle, unlocking door
Auxiliary bolt deadlatches when door is closed.
Entrance Locking Latch Cylinder and Turnbutton.(With dual function) Latchbolt operated by handles either side. 25KA
Both handles are locked or unlocked by either key from outside or turnbutton inside. Key outside retracts latch.*
*Key from outside can be rotated either way, thus retracts latchbolt or unlocks outside handle. (A counter action for vandalism to outside handle).
Auxiliary bolt automatically deadlatches when door is closed.
Patio Lock Cylinder Outside.
Latchbolt operated by handles either side. 25VO Both handles are locked or unlocked by key from outside.
Auxiliary bolt automatically deadlatches when door is closed.
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 25JA SS
All dimensions in mm2.18
Narrow Stile Mortice Locks
2500 Series Combination Lock
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 25EA SS
2500 Series Mortice Combination Locks
Product Description Catalogue No.
Entrance Lock Double Cylinder Double Cylinder.
Latchbolt operated by handles either side. 25CV Both handles are locked or unlocked by key from inside.
Key outside retracts latchbolt.
Auxiliary bolt automatically deadlatches when door is closed.
Privacy Latch Turnbutton Inside. Emergency Button Outside.
Latchbolt operated by handles either side. 25EA Both handles are locked or unlocked by turnbutton inside.
Emergency button outside allowing emergency unlocking.
Auxiliary bolt automatically deadlatches when door is closed.
Patio Lock Turnbutton Inside
Latchbolt operated by handles either side. 25OA Both handles are locked or unlocked by turnbutton inside.
Auxiliary bolt automatically deadlatches when door is closed.
Entrance Lock Double Cylinder Double Cylinder.
Latchbolt operated by handles either side. 25VV Both handles are locked or unlocked by either key from either side.
Auxiliary bolt automatically deadlatches when door is closed.
All dimensions in mm 2.19
Narrow Stile Mortice Locks
2500 Series Combination Lock
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 25CA SS
2500 Series Mortice Combination Locks
Product Description Catalogue No.
Exit Lock Single Cylinder Cylinder Inside.
Latchbolt operated by handles either side. 25OV Both handles are locked or unlocked by key from inside.
Auxiliary bolt automatically deadlatches when door is closed.
Office Locking Latch Cylinder and Turnbutton.
Latchbolt operated by handles either side. 25CA Both handles are locked or unlocked by turnbutton inside. Cylinder outside retracts latch.
Auxiliary bolt automatically deadlatches when door is closed.
All dimensions in mm2.20
Narrow Stile Mortice Locks
Finishes
SS Stainless Steel.
Latchbolt
14mm Standard latchbolt.
Backsets Available
23mm.
Passage LatchNon-locking handle/knob. Passage latch from either side.
No deadlatching required.
155.8176
45
28
23
39.525.2
2000/SB01STRIKE BOX
20
3.0
70 5433
13 28
100
14
R 3.0
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29
20
47
Limiting Dimensions
2600 Series Passage Lock
All dimensions in mm 2.21
Narrow Stile Mortice Locks
2600 Series Passage Latch
2600 Series Mortice Passage Latch
Product Description Catalogue No.
Passage Set 2600 Passage Set Plain Latch.
Latchbolt operated by handles both sides. 2600
Finish Codes: SS Stainless Steel
Note: Add finish code to above to form complete catalogue number e.g. 2600 SS
All dimensions in mm2.22
Narrow Stile Mortice Locks
Accessories
20
28
70 5433
13
2000/FPDLTFACEPLATE FOR TIMBER DOORTO SUIT 2400 & 2500 SERIES
2000/SB01STRIKE BOX
250
1000/SP0236mm EXTENDEDUNIVERSAL STRIKE
1000/SP0340mm EXTENDEDUNIVERSAL STRIKE
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29 2929 2929
20
47 62 66
7054 705438 38
4536
5040
20
28
70 5433
13
2000/FPDLTFACEPLATE FOR TIMBER DOORTO SUIT 2400 & 2500 SERIES
2000/SB01STRIKE BOX
250
1000/SP0236mm EXTENDEDUNIVERSAL STRIKE
1000/SP0340mm EXTENDEDUNIVERSAL STRIKE
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29 2929 2929
20
47 62 66
7054 705438 38
4536
5040
20
28
70 5433
13
2000/FPDLTFACEPLATE FOR TIMBER DOORTO SUIT 2400 & 2500 SERIES
2000/SB01STRIKE BOX
250
1000/SP0236mm EXTENDEDUNIVERSAL STRIKE
1000/SP0340mm EXTENDEDUNIVERSAL STRIKE
2000/SP0120mm UNIVERSAL STRIKE
29
32
705438
29 2929 2929
20
47 62 66
7054 705438 38
4536
5040
2400/2500/2600 Series Accessories
All dimensions in mm 2.23
Narrow Stile Mortice Locks
2400/2500/2600 Series Accessories
Cam Identification Chart
Function Assembly Chart
2400 SErIES OuTSIDE INSIDE
24JA 2000/CAMJ1 2000/TAJ1
24JAAL 2000/CAMJ1 2000/TAJ1
24KA 2000/CAMK1 2000/CAMV
2000/TAK1 BLANK
24VO 1000/J1 2000/CAMV
BLANK
24CV 2000/CAMC 2000/CAMV 1000/J1
24OV BLANK 2000/CAMV 1000/J1
24KO 2000/CAMK1 BLANK
24CO 2000/CAMC BLANK
24VV 2000/CAMV 1000/J1
2000/CAMV 1000/J1
24CA 2000/CAMC 2000/TAJ2
24OA BLANK 2000/TAJ2
24EO BLANK BLANK
2500 SErIES OuTSIDE INSIDE
25JA 2000/CAMJ1 2000/TAJ1
25JAAL 2000/CAMJ1 2000/TAJ1
25KA 2000/CAMK1 2000/CAMV
2000/TAK1 BLANK
25VO 1000/J1 2000/CAMV
BLANK
25CV 2000/CAMC 2000/CAMV 1000/J1
25EA BLANK 2000/TAJ2
25OA BLANK 2000/TAJ2
25VV 2000/CAMV 1000/J1
2000/CAMV 1000/J1
25CA 2000/CAMC 2000/TAJ2
25OV BLANK 2000/CAMV 1000/J1
2600 SErIES OuTSIDE INSIDE
2600 BLANK BLANK
Keying Information
6 pin tumbler cylinder supplied in the standard broach, keyed to differ with 2 keys per lock. Special keying is available.
All Gainsborough locksets come with brass keys. Standard keyed differently (KD) unless otherwise specified. Locks can be keyed to following systems:
KA Keyed Alike
MK Master Keyed
GMK Grand Master Keyed
GGMK Great Grand Master Keyed
MA Maison Keyed
PK Project Keyed
PMK Project Master Keyed
Cam Identification
2000/CAMH1000/J1
2000/CAMJ1
2000/CAMK12000/CAMC
2000/CAMV1000/J1
2000/TAC1