Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Table of Contents
Modular Graphic Case System Reference Guide Synthes
Introduction
Components
Modular Graphic Case System 2Overview 2Build-A-Set 6
Customizable Module Shells 9Building a Plate Module 10Small Fragment Plate Module Bins 12Distal Fibula Plate Module Bins 14K-Wire Module Bin 16Auxiliary Module Bins 172.4 mm/2.7 mm VA-LCP Forefoot/Midfoot System Modular Components 182.4 mm LCP and VA-LCP Distal Radius System Modular Components 20LCP Modular Clavicle Plate System Modular Components 23
Customizable Screw Modules 25Building a Screw Module 26Screw Blocks and Flip-up Screw Racks 28
Customizable Screw Racks 33Building a Screw Rack 33Screw Rack Blocks 34
Instrument Trays and Bins 371/3 Length Trays 402/3 Length Trays 51Auxiliary Trays 52Instrument Bins 53Auxiliary Bin 54
Modular Graphic Cases 55Full Length Graphic Cases 562/3 Length Graphic Cases 58
Accessories 61
2 Synthes Modular Graphic Case System Reference Guide
Graphic Cases are designed to holdscrew modules, plate modules, screwracks or instrument trays. Six sizes areavailable for flexibility in building sets.
Modular Graphic Case SystemOverview
Modular Graphic CasesSystem features six generic graphic cases
Modular Graphic Case System Reference Guide Synthes 3
Instrument Trays Screw insertion andgeneral instrument traysare available
Customizable Module ShellsBuild a module with implant specific module bins
Customizable Screw ModuleBuild a screw module with screwblocks and flip-up screw racks
Customizable Screw RackBuild a screw rack with screw rack blocks
The Modular Graphic Case System redefines one-size-fits-all sets.
With this system, Synthes consultants can create custom sets comprising only the necessary instruments and implants to meet surgeon needs.
6 Synthes Modular Graphic Case System Reference Guide
Modular Graphic Case System
Build-A-Set
Example of building a plate setThere are four components to buildinga complete plate set:
Instrument TraysGraphic Cases
Components
Customizable Module ShellsBuilding a Plate Module
Module Shell (60.116.052)
Module Bins
Example Plate Module
10 Synthes Modular Graphic Case System Reference Guide
Modular Graphic Case System Reference Guide Synthes 11
Possible Module Bin Configurations
1 Full Length, Full Height
2 Full Length, Half Height 1 Half Length, Full Height2 Half Length, Half Height
4 Half Length, Half Height2 Half Length, Half Height1 Full Length, Half Height
2 Half Length, Full Height
12 Synthes Modular Graphic Case System Reference Guide
Module Bin*60.116.210 Module Bin for LCP 1/3 Tubular Plates,
1/2 Length, 1/2 Height for Module ShellSet01.116.210/ LCP 1/3 Tubular Plates Module Bin Set 01.116.410 for Module Shell, 1/2 Length, 1/2 Height
(stainless steel or titanium)
ImplantsLCP One-Third Tubular Plate with Collar
Stainless Steel Titanium Holes Length (mm)
241.331 441.331 3 33
241.341 441.341 4 45
241.351 441.351 5 57
241.361 441.361 6 69
241.371 441.371 7 81
241.381 441.381 8 93
241.391 441.391 9 105
241.401 441.401 10 117
Module Bin60.116.211 Module Bin for 3.5 mm LCP Proximal
Humerus Plates, 1/2 Length, 1/2 Height for Module Shell
Set01.116.211/ 3.5 mm LCP Proximal Humerus Plates 01.116.411 Module Bin Set for Module Shell, 1/2 Length,
1/2 Height (stainless steel or titanium)
Instruments03.122.053/ Outer Sleeve for Insertion Guide323.053 3.5 mm Locking Screw Sleeve03.122.056/ Insertion Guide with Nose323.050 Insertion Guide03.122.064/ 2.8 mm Drill Sleeve323.054 2.8 mm Drill Sleeve03.122.065/ 1.6 mm Wire Sleeve323.055 1.6 mm Wire Sleeve
Implants3.5 mm LCP Proximal Humerus Plates, standard ShaftStainless Steel Titanium Holes Length (mm)
241.901 441.901 3 90
241.903 441.903 5 114
Customizable Module Shells
Small Fragment Plate Module Bins
01.116.210
01.116.211
* This bin will hold locking or nonlocking plates
Modular Graphic Case System Reference Guide Synthes 13
Module Bin*60.116.214** Module Bin for 3.5 mm Plates, Full Length,
1/2 Height for Module Shell
Set01.116.214/ 3.5 mm LCP Straight and Reconstruction 01.116.414 Plates Module Bin Set for Module Shell,
Full Length, 1/2 Height (stainless steel or titanium)
Implants3.5 mm LCP Plates Stainless Steel Titanium Holes Length (mm)
223.551 423.551 5 72
223.561 423.561 6 85
223.581 423.581 8 111
223.591 423.591 9 124
223.601 423.601 10 137
223.621 423.621 12 163
223.641 423.641 14 189
3.5 mm LCP Reconstruction Plates Stainless Steel Titanium Holes Length (mm)
245.051 445.051 5 70
245.061 445.061 6 84
245.071 445.071 7 98
245.081 445.081 8 112
245.101 445.101 10 140
245.121 445.121 12 168
245.141 445.141 14 196
* This bin will hold locking or nonlocking plates**Label sheet included
01.116.214
14 Synthes Modular Graphic Case System Reference Guide
01.112.154
Module Bin60.112.053* Module Bin for Lateral or Posterolateral
Fibula Plates, Full Length, 1/2 Height, forModule Shell
Set01.112.154/ LCP Posterolateral Fibula Plates Module Bin01.112.454 Set, Full Length, 1/2 Height, for Module
Shell (stainless steel or titanium)
Implants2.7 mm/3.5 mm LCP Posterolateral Distal Fibula PlatesStainless Steel Titanium Holes Length (mm)
02.112.106 04.112.106 3 77 right
02.112.107 04.112.107 3 77 left
02.112.108 04.112.108 4 90 right
02.112.109 04.112.109 4 90 left
02.112.110 04.112.110 5 103 right
02.112.111 04.112.111 5 103 left
02.112.112 04.112.112 6 116 right
02.112.113 04.112.113 6 116 left
02.112.114 04.112.114 7 129 right
02.112.115 04.112.115 7 129 left *Label sheet included
Customizable Module Shells
Distal Fibula Plate Module Bins
Module Bin60.112.051 Module Bin for Posterolateral Fibula Plates,
1/2 Length, 1/2 Height, for Module Shell
Set01.112.151/ LCP Posterolateral Fibula Plates Module Bin01.112.451 Set for Module Shell, 1/2 Length,
1/2 Height (stainless steel or titanium)
Implants2.7 mm/3.5 mm LCP Posterolateral Distal Fibula PlatesStainless Steel Titanium Holes Length (mm)
02.112.106 04.112.106 3 77 right
02.112.107 04.112.107 3 77 left
02.112.108 04.112.108 4 90 right
02.112.109 04.112.109 4 90 left
02.112.110 04.112.110 5 103 right
02.112.111 04.112.111 5 103 left
02.112.112 04.112.112 6 116 right
02.112.113 04.112.113 6 116 left
01.112.151
Note: Fibula plates up to 233 mm long can fit in this module bin.
Modular Graphic Case System Reference Guide Synthes 15
Module Bin60.112.053* Module Bin for Lateral or Posterolateral
Fibula Plates, Full Length, 1/2 Height, forModule Shell
Set01.112.153/ LCP Lateral Fibula Plates Module Bin Set,01.112.453 Full Length, 1/2 Height, for Module Shell
(stainless steel or titanium)
Implants2.7 mm/3.5 mm LCP Lateral Distal Fibula PlatesStainless Steel Titanium Holes Length (mm)
02.112.136 04.112.136 3 73 right
02.112.137 04.112.137 3 73 left
02.112.138 04.112.138 4 86 right
02.112.139 04.112.139 4 86 left
02.112.140 04.112.140 5 99 right
02.112.141 04.112.141 5 99 left
02.112.142 04.112.142 6 112 right
02.112.143 04.112.143 6 112 left
02.112.144 04.112.144 7 125 right
02.112.145 04.112.145 7 125 left
01.112.153
01.112.152
Module Bin60.112.052 Module Bin for Lateral Fibula Plates, 1/2
Length, 1/2 Height, for Module Shell
Set01.112.152/ LCP Lateral Fibula Plates Module Bin Set01.112.452 for Module Shell, 1/2 Length, 1/2 Height (stainless steel or titanium)
Implants2.7 mm/3.5 mm LCP Lateral Distal Fibula PlatesStainless Steel Titanium Holes Length (mm)
02.112.136 04.112.136 3 73 right
02.112.137 04.112.137 3 73 left
02.112.138 04.112.138 4 86 right
02.112.139 04.112.139 4 86 left
02.112.140 04.112.140 5 99 right
02.112.141 04.112.141 5 99 left
02.112.142 04.112.142 6 112 right
02.112.143 04.112.143 6 112 left
*Label sheet included
Note: Fibula plates up to 233 mm long can fit in this module bin.
16 Synthes Modular Graphic Case System Reference Guide
Customizable Module Shells
K-Wire Module Bin
Module Bin*60.116.215 Module Bin for K-Wires for Module Shell
for Modular Graphic Case System
Set01.116.215 K-wire Module Bin Set for Module Shell
Instruments292.12 1.25 mm Kirschner Wire with Trocar Point,
150 mm, 10/pkg.292.16 1.6 mm Kirschner Wire with Trocar Point,
150 mm, 10/pkg.292.20 2.0 mm Kirschner Wire with Trocar Point,
150 mm, 10/pkg.
01.116.215
*Label sheet included
Modular Graphic Case System Reference Guide Synthes 17
Customizable Module Shells
Auxiliary Module Bins
Auxiliary Module Bins, for Module Shell
60.116.200 Full Length, Full Height
60.116.201 Full Length, 1/2 Height
60.116.202 1/2 Length, Full Height
60.116.203 1/2 Length, 1/2 Height
60.116.200
60.116.202
60.116.203
60.116.201
18 Synthes Modular Graphic Case System Reference Guide
Please refer to the 2.4 mm/2.7 mm VA-LCP Forefoot/MidfootSystem Technique Guide for complete set lists.
60.211.009* Proximal and Distal Reamers ModuleBin 1, Full Length
Found in the following set:
01.211.112 Proximal and Distal Reamers Set, 14 mm–24 mm
Note: This bin leaves a space for a 1/2 length, 1/2 heightmodule bin. We recommend filling this space with the60.211.010 (Proximal and Distal Reamers Module Bin 2) or60.116.203 (Auxiliary Bin 1/2 Length, 1/2 Height) bin so the contents in the module stay in place.
60.211.010 Proximal and Distal Reamers ModuleBin 2, 1/2 Length, 1/2 Height
Found in the following set:
01.211.113 Proximal and Distal Reamers Set, 6 mm–12 mm
60.211.008* Compression Wires and ForcepsModule Bin, Full Length
Found in the following sets:
01.211.214 Compression Instruments, X- and StraightPlate Set
01.211.414 Titanium Compression Instruments, X- and Straight Plate Set
Note: This bin leaves a space for a 1/2 Length, 1/2 Heightmodule bin. We recommend filling this space with60.116.203 (Auxiliary Bin 1/2 Length, 1/2 Height) or another1/2 Length, 1/2 Height module bin so the contents in themodule stay in place.
Customizable Module Shells
2.4 mm/2.7 mm VA-LCP Forefoot/Midfoot System Modular Components
*Shown with module shell 60.116.052
Modular Graphic Case System Reference Guide Synthes 19
*Shown with module shell 60.116.052
60.211.006 TMT, First TMT, Cloverleaf T and L FusionPlate Module Bin, 1/2 Length, 1/2 Height
Found in the following sets:
01.211.215 TMT Fusion Plate Set
01.211.415 Titanium TMT Fusion Plate Set
60.211.001 First MTP Fusion Module Bin, 1/2 Length, 1/2 Height
Found in the following sets:
01.211.216 First MTP Fusion Plates Set
01.211.416 Titanium First MTP Fusion Plates Set
60.211.007* Opening Wedge Plate and InstrumentModule Bin, Full Length
Found in the following sets:
01.211.217 Opening Wedge Plates and Instrument Set
01.211.417 Titanium Opening Wedge Plates andInstrument Set
Note: This bin leaves a space for a full length, 1/2 heightmodule bin. We recommend filling this space with 60.116.201(Auxiliary Bin full length, 1/2 height) or two other 1/2 length,1/2 height module bins so the contents in the module stay in place.
60.211.005 Tarsal and Mesh Plate Module Bin, 1/2 Length, 1/2 Height
Found in the following sets:
01.211.218 Tarsal and Mesh Plates Set
01.211.418 Titanium Tarsal and Mesh Plates Set
Customizable Module Shells
2.4 mm LCP and VA-LCP Distal Radius System Modular Components
20 Synthes Modular Graphic Case System Reference Guide
60.111.478 Module Bin, 1/2 Length, 1/2 Height, fornarrow 6-hole head two-column plate
Found in the following sets:
01.111.510 2.4 mm VA-LCP Two-Column Plate Modulewith Bins
01.111.511 2.4 mm Titanium VA-LCP Two-ColumnPlate Module with Bins
60.111.479 Module Bin, 1/2 Length, 1/2 Height, for 6-hole head two-column plate
Found in the following sets:
01.111.510 2.4 mm VA-LCP Two-Column Plate Modulewith Bins
01.111.511 2.4 mm Titanium VA-LCP Two-ColumnPlate Module with Bins
01.111.514 2.4 mm VA-LCP Two-Column and LCPVolar Column Plate Module with Bins
60.111.480 Module Bin, 1/2 Length, 1/2 Height, for 7-hole head two-column plate
Found in the following sets:
01.111.510 2.4 mm VA-LCP Two-Column Plate Modulewith Bins
01.111.511 2.4 mm Titanium VA-LCP Two-ColumnPlate Module with Bins
01.111.514 2.4 mm VA-LCP Two-Column and LCPVolar Column Plate Module with Bins
Modular Graphic Case System Reference Guide Synthes 21
60.111.481 Module Bin, 1/2 Length, 1/2 Height, for 6-hole head volar column plates
Found in the following sets:
01.111.512 2.4 mm LCP Volar Column Plate Modulewith Bins
01.111.513 2.4 mm Titanium LCP Volar Column PlateModule with Bins
60.111.482 Module Bin, 1/2 Length, 1/2 Height, for 7-hole head volar column plates
Found in the following sets:
01.111.512 2.4 mm LCP Volar Column Plate Modulewith Bins
01.111.513 2.4 mm Titanium LCP Volar Column PlateModule with Bins
01.111.514 2.4 mm VA-LCP Two-Column and LCPVolar Column Plate Module with Bins
60.111.483 Module Bin, 1/2 Length, 1/2 Height, for 8-hole head volar column plates
Found in the following sets:
01.111.512 2.4 mm LCP Volar Column Plate Modulewith Bins
01.111.513 2.4 mm Titanium LCP Volar Column PlateModule with Bins
01.111.514 2.4 mm VA-LCP Two-Column and LCPVolar Column Plate Module with Bins
Customizable Module Shells2.4 mm LCP and VA-LCP Distal Radius System Modular Components
22 Synthes Modular Graphic Case System Reference Guide
60.111.484 Module Bin, 1/2 Length, 1/2 Height, for 9-hole head volar column plates
Found in the following sets:
01.111.512 2.4 mm LCP Volar Column Plate Modulewith Bins
01.111.513 2.4 mm Titanium LCP Volar Column PlateModule with Bins
60.111.485 Module Bin, Full Length, 1/2 height, for 2.4 mm VA-LCP dorsal distal radiusplates
Found in the following sets:
01.115.010 2.4 mm Variable Angle LCP Dorsal DistalRadius Plate Bin Set
01.115.011 2.4 mm Titanium Variable Angle LCP Dorsal Distal Radius Plate Bin Set
60.111.486 Module Bin, 1/2 Length, 1/2 Height, for VA-LCP Volar Rim Plates
01.115.486 2.4 mm Variable Angle LCP (VA-LCP) VolarRim Distal Radius Plate Bin Set
01.115.487 2.4 mm Titanium Variable Angle LCP(VA-LCP) Volar Rim Distal Radius Plate Bin Set
Note: These sets only include the module bin, plates andguide blocks
Modular Graphic Case System Reference Guide Synthes 23
Please refer to the 2.7 mm/3.5 mm VA-LCP Anterior ClaviclePlates Technique Guide for complete set lists.
60.112.038* Superior Clavicle Plate Tray
Found in the following sets:
01.112.294 Superior Clavicle Plate Set
01.112.494 Titanium Superior Clavicle Plate Set
60.112.039 Tray for Superior Clavicle Plate withExtension
Found in the following sets:
01.112.294 Superior Clavicle Plate Set
01.112.494 Titanium Superior Clavicle Plate Set
60.112.036* Superior Anterior Clavicle Plate Tray
Found in the following sets:
01.112.296 Superior Anterior Clavicle Plate Set
01.112.496 Titanium Superior Anterior Clavicle Plate Set
60.112.037 Tray for Superior Anterior ClaviclePlate with Extension
Found in the following sets:
01.112.296 Superior Anterior Clavicle Plate Set
01.112.496 Titanium Superior Anterior Clavicle Plate Set
60.112.041* Anterior Clavicle Plates Tray
Found in the following sets:
01.112.298 Anterior Clavicle Plate Set
01.112.498 Titanium Anterior Clavicle Plate Set
Customizable Module Shells
LCP Modular Clavicle Plate System Modular Components
*Shown with module shell 60.116.052
26 Synthes Modular Graphic Case System Reference Guide
Customizable Screw ModulesBuilding a Screw Module
Screw Module Shell (60.116.050)
Screw Blocks and/or Flip-up ScrewRacks
Screw Length/Type Markers and Labels
Example Screw Module
Components
Modular Graphic Case System Reference Guide Synthes 27
Possible Screw Module Configurations
2 Screw Blocks1 Flip-up Screw Rack
2 Flip-up Screw Racks1 Screw Block
1 Flip-up Screw Rack1 Screw Module Auxiliary Bin
3 Screw Blocks
1 Screw Block1 Screw Module Auxiliary Bin
28 Synthes Modular Graphic Case System Reference Guide
Customizable Screw Modules
Screw Blocks and Flip-up Screw Racks
60.116.050 Screw Module Shell
Screw Blocks for Screw Module Shell (holds up to 28 mm)60.116.057 2.0 mm
60.116.058 2.4 mm
60.116.059 2.7 mm
60.116.060 3.0 mm
60.116.061 3.5 mm
60.116.062 4.0 mm
60.116.065 1.5 mm Headless Compression
60.116.066 2.4 mm Headless Compression
60.116.067 3.0 mm Headless Compression
Modular Graphic Case System Reference Guide Synthes 29
60.116.058
60.116.060 60.116.062
60.116.057 60.116.059
60.116.061
60.116.065 60.116.06760.116.066
Customizable Screw ModulesScrew Blocks and Flip-up Screw Racks
30 Synthes Modular Graphic Case System Reference Guide
60.116.050 Screw Module Shell
Flip-up Screw Racks for Screw Module Shell (holds up to 60 mm)60.116.070 2.0 mm
60.116.071 2.4 mm
60.116.072 2.7 mm
60.116.073 3.0 mm
60.116.074 3.5 mm
60.116.075 4.0 mm
60.116.078 2.4 mm Headless Compression
60.116.079 3.0 mm Headless Compression
Modular Graphic Case System Reference Guide Synthes 31
60.116.07160.116.070
60.116.073 60.116.075
60.116.072
60.116.074
60.116.078 60.116.079
Customizable Screw ModulesScrew Blocks and Flip-up Screw Racks
32 Synthes Modular Graphic Case System Reference Guide
Screw Module Bins60.116.053 Screw Module Auxiliary Bin, 2 /3 Length
60.116.024 Instrument Bin for 2.0 mm Locking andCortex Screws for Screw Module Shell, 2 /3 Length
60.116.025 Instrument Bin for 2.4 mm CannulatedScrews for Screw Module Shell, 2/3 Length
60.116.053
60.116.024
60.116.025
Accessories for Screw Module Shell60.116.013* Assembly Screws for Screw Module Shell,
5 pack
60.116.051 Replacement Lid for Screw Module Shell
Insert Assembly Screws (60.116.013) for screw module shell here* One pack of assembly screws is included with the screw module shell,
60.116.050
Components needed
Customizable Screw RacksBuilding a Screw Rack
Screw Rack Shell (60.116.100)
Screw Rack Blocks
Example Screw Rack
Screw Length Type/Markers and Labels
Modular Graphic Case System Reference Guide Synthes 33
34 Synthes Modular Graphic Case System Reference Guide
Screw Rack Blocks for Screw RackShell (holds up to 95 mm)60.116.101 2.4 mm
60.116.102 2.7 mm
60.116.103 3.0 mm
60.116.104 3.5 mm
60.116.105 4.0 mm
60.116.110 4.0 mm Locking (holdsup to 90 mm)
60.116.106 4.5 mm
60.116.107 5.0 mm
60.116.111 5.0 mm Periprosthetic
60.116.112 Auxiliary Block for ScrewRack Shell
60.116.100 Screw Rack Shell
68.000.119 Unlocking Tool, for ScrewRack Shell
60.116.120 Assembly Clip, for ScrewRack Shell
60.116.098 Replacement Lid, forScrew Rack Shell
Customizable Screw Racks
Screw Rack Blocks
Modular Graphic Case System Reference Guide Synthes 35
60.116.101 60.116.102 60.116.103 60.116.104
60.116.105 60.116.106 60.116.107 60.116.111 60.116.112
60.116.110
38 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins
Instrument Tray Sizes
2/3 Length, 1/2 Width
2/3 Length
1/3 Length
Modular Graphic Case System Reference Guide Synthes 39
Possible Configurations
1/3 Length2/3 Length
1/3 Length2/3 Length, 1/2 Width
40 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins
1/3 Length Trays
01.116.020
Tray60.116.020 Instrument Tray for 2.4 mm Cortex /
Variable Angle Screws, 1/3 Length, forModular Graphic Case System
Set01.116.020 2.4 mm Cortex /VA Locking Instrument
Set, 1/3 Length, for Modular Graphic CaseSystem
Instruments03.110.000 1.8 mm Universal Variable Angle Locking
Drill Guide03.110.005 Handle for Torque Limiting Attachment03.110.023 1.8 mm Variable Angle Locking Drill Guide,
Cone03.110.024 1.8 mm Variable Angle Locking Drill Guide,
Coaxial03.111.005 Depth Gauge, for 2.4 mm and 2.7 mm
Screws03.211.001 2.4 mm/2.7 mm Variable Angle LCP Plate
Holding Pins310.509 1.8 mm Drill Bit with Depth Mark, quick
coupling, 110 mm, 2 ea.310.530 2.4 mm Drill Bit, quick coupling, 100 mm,
2 ea.311.43 Handle with quick coupling314.453 StarDrive Screwdriver Shaft, T8, 55 mm,
2 ea.314.467 StarDrive Screwdriver Shaft, T8, 105 mm,
2 ea.314.468 Holding Sleeve for StarDrive Screwdriver
Shaft, T8323.029 Threaded LCP Drill Guide for LCP Distal
Radius Plates, 2 ea.323.202 2.4 mm Universal Drill Guide511.776 Torque Limiting Attachment, 0.8 Nm, quick
coupling
Modular Graphic Case System Reference Guide Synthes 41
01.116.021
Tray60.116.021 Instrument Tray for 2.4 mm Cortex/Locking
Screws, 1/3 length, for Modular GraphicCase System
Set01.116.021 2.4 mm Cortex and Locking Screws
Instrument Set, 1/3 Length, for ModularGraphic Case System
Instruments03.110.020 Measuring Device for use with 1.8 mm
Short Threaded Drill Guide03.111.005 Depth Gauge for 2.0 mm/2.4 mm and
2.7 mm Screws03.111.011 1.8 mm LCP Solid Threaded Drill Guide for
2.4 mm LCP Plates, 2 ea.310.509 1.8 mm Drill Bit with Depth Mark, quick
coupling, 110 mm, 2 ea.310.530 2.4 mm Drill Bit, quick coupling, 100 mm,
2 ea.310.972 Countersink for 2.0 mm/2.4 mm Screws311.01 Handle with mini quick coupling311.43 Handle with quick coupling314.467 StarDrive Screwdriver Shaft, T8, 105 mm,
2 ea.314.468 Holding Sleeve for StarDrive Screwdriver
Shaft T8319.006 Depth Gauge for 2.0 mm and 2.4 mm
Screws323.029 Threaded LCP Drill Guide for LCP Distal
Radius Plates, 2 ea.323.202 2.4 mm Universal Drill Guide324.084 1.25 mm K-Wire Insert329.922 Bending Pin for 2.4 mm Locking Plates,
2 ea.
42 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins1/3 Length Trays
01.116.022
Tray
60.116.022 Instrument Tray for 2.7 mm Cortex /Locking/Variable Angle Locking Screws, 1/3 Length, for Modular Graphic Case System
Set
01.116.022 2.7 mm Cortex /Locking/VA LockingInstrument Set, 1/3 Length, for ModularGraphic Case System
Instruments
03.110.005 Handle for Torque Limiting Attachment
03.211.001 Bending Pin for 2.7 mm Variable AngleLocking Plates, 2 ea.
03.211.002 2.0 mm Universal Variable Angle LockingDrill Guide
03.211.003 2.0 mm Variable Angle Locking Drill Guide,variable
03.211.004 2.0 mm Variable Angle Locking Drill Guide,coaxial
310.26 2.7 mm Drill Bit, quick coupling, 100 mm,2 ea.
310.87 Countersink for 2.7 mm Cortex Screws
311.43 Handle with quick coupling
314.453 Short StarDrive Screwdriver Shaft, T8, 55 mm, 2 ea.
314.467 StarDrive Screwdriver Shaft T8, 105 mm, 2 ea.
314.468 Holding Sleeve for StarDrive ScrewdriverShaft, T8
319.01 Depth Gauge, for 2.7 mm and 3.5 mmScrews
323.061 2.0 mm Threaded Drill Guide with DepthGauge, 2 ea.
323.062 2.0 mm Drill Bit with Depth Mark, quickcoupling, 140 mm, 2 ea.
323.26 2.7 mm Universal Drill Guide
329.922 Bending Pin for 2.4 mm Locking Plates, 2 ea.
511.776 Torque Limiting Attachment, 0.8 Nm, quickcoupling
Modular Graphic Case System Reference Guide Synthes 43
Tray
60.116.023 Instrument Tray for 3.5 mm Cortex/Lockingand 4.0 mm Cortex /Cancellous Screws,1/3 Length, for Modular Graphic CaseSystem
Set
01.116.023 3.5 mm Cortex /Locking and 4.0 mmCortex /Cancellous Screws Instrument Set,1/3 Length, for Modular Graphic CaseSystem
Instruments310.229 2.9 mm Drill Bit, quick coupling, 150 mm,
2 ea.
310.25 2.5 mm Drill Bit, quick coupling, gold, 110 mm, 2 ea.
310.288 2.8 mm Drill Bit, quick coupling, 165 mm,2 ea.
310.35 3.5 mm Drill Bit, quick coupling, 110 mm,2 ea.
310.401 4.0 mm Drill Bit, quick coupling, 160 mm,2 ea.
310.89 Countersink for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
311.43 Handle with quick coupling
312.30 3.5 mm/2.5 mm Insert Drill Sleeve
312.401 4.0 mm/2.9 mm Double Drill Sleeve
312.648 2.8 mm Threaded Drill Guide, 2 ea.
314.03 Small Hexagonal Screwdriver Shaft
314.06 Holding Sleeve
314.116 StarDrive Screwdriver Shaft, quick coupling,T15
319.01 Depth Gauge for 2.7 mm and Small Screws
323.36 3.5 mm Universal Drill Guide
511.773 Torque Limiting Attachment, 1.5 Nm,quick coupling
60.116.023
44 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins1/3 Length Trays
60.116.026
Tray60.116.026 Instrument Tray for 3.0 mm Cannulated
Screws Instrument Set, 1/3 Length, forModular Graphic Case System
Set
01.116.026 3.0 mm Cannulated Screws Instrument Set,1/3 Length, for Modular Graphic CaseSystem
Instruments
219.89 Threaded Washer for 3.0 mm CannulatedScrews, 5 ea.
219.972 Washer, 6.5 mm, for 3.0 mm cannulatedscrews, 6 ea.
292.622 1.1 mm Threaded Guide Wire 150 mm, 10 ea.
292.623 1.1 mm Non-Threaded Guide Wire 150 mm,10 ea.
309.501 Conical Extraction Device for ThreadedWashers
310.221 2.0 mm Cannulated Drill Bit, quick coupling, 150 mm, 2 ea.
310.804 Cannulated Countersink for 3.0 mm Cannulated Screws
311.43 Handle with quick coupling
312.151 2.0 mm/1.1 mm Double Drill Sleeve
312.153 5.5 mm/4.3 mm Double Drill Sleeve
313.969 Holding Sleeve for 3.0 mm CannulatedScrewdriver
314.463 Cannulated Cruciform Screwdriver
314.464 Cannulated Driver for Threaded Washersfor 3.0 mm Cannulated Screws
314.465 Cruciform Screwdriver Shaft
319.291 1.25 mm Cleaning Brush
319.292 1.1 mm Cleaning Stylet
319.702 Cannulated Screw Measuring Device for3.0 mm Cannulated Screws
Modular Graphic Case System Reference Guide Synthes 45
Tray60.116.027 Instrument Tray for 3.5 mm and 4.0 mm
Cannulated Screws, 1/3 Length, forModular Graphic Case System
Set
01.116.027 3.5 mm/4.0 mm Cannulated ScrewsInstrument Set, 1/3 Length, for ModularGraphic Case System
Instruments
310.67 2.7 mm Cannulated Drill Bit, quickcoupling, 160 mm, 2 ea.
310.86 Cannulated Countersink for 3.5 mm and4.0 mm Cannulated Screws
311.39 Cannulated Tap for 3.5 mm CannulatedScrews, 146 mm
311.43 Handle with quick coupling
311.63 Cannulated Tap for 4.0 mm CannulatedScrews, 147 mm
312.28 3.5 mm/2.5 mm Double Drill Sleeve
312.35 2.7 mm/1.25 mm Double Drill Sleeve
314.03 Small Hexagonal Screwdriver Shaft
314.08 Holding Sleeve
314.10 Cannulated 2.5 mm HexagonalScrewdriver Shaft
319.15 Cannulated Screw Measuring Device for3.5 mm and 4.0 mm Cannulated Screws
319.25 1.35 mm Cleaning Brush
319.38 1.25 mm Cleaning Stylet
900.721 1.25 mm Non-Threaded Guide Wire, 150 mm
900.722 1.25 mm Threaded Guide Wire, 150 mm
60.116.027
46 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins1/3 Length Trays
01.116.028
Tray
60.116.028 Instrument Tray for 2.4 mm and 2.7 mm Cortex /Locking/VA-LCP Screws,1/3 Length, for Modular Graphic CaseSystem
Set
01.116.028 2.4 mm/2.7 mm Cortex /Locking/VALocking Screws Instrument Set, 1/3 Length,for Modular Graphic Case System
Instruments
03.110.002 Torque Limiting Attachment, 1.2 Nm
03.110.005 Handle for Torque Limiting Attachment
03.110.023 1.8 mm Variable Angle Locking Drill Guide,Cone
03.110.024 1.8 mm Variable Angle Locking Drill Guide,Coaxial
03.111.005 Depth Gauge for 2.0 mm/2.4 mm and 2.7 mm Screws
03.111.011 1.8 mm LCP Solid Threaded Drill Guide for2.4 mm LCP Plates, 2 ea.
03.211.001 2.4 mm/2.7 mm VA-LCP Plate HoldingPins, 2 ea.
03.211.003 2.0 mm Variable Angle Locking Drill Guide,Variable
03.211.004 2.0 mm Variable Angle Locking Drill Guide,Coaxial
310.26 2.7 mm Drill Bit, quick coupling, 100 mm,2 ea.
310.509 1.8 mm Drill Bit with Depth Mark, quickcoupling, 110 mm, 2 ea.
310.530 2.4 mm Drill Bit, quick coupling, 100 mm,2 ea.
310.87 Countersink for 2.7 mm Cortex Screws
310.972 Countersink for 2.0 mm and 2.4 mm Screws
311.43 Handle with quick coupling
313.353 2.0 mm LCP Solid Threaded Drill Guide, 2 ea.
314.453 StarDrive Screwdriver Shaft T8, 55 mm
314.467 StarDrive Screwdriver Shaft T8, 105 mm
314.468 Holding Sleeve for StarDrive ScrewdriverShaft, T8
319.01 Depth Gauge for 2.7 mm and Small Screws
323.029 1.8 Threaded LCP Drill Guide, 2 ea.
323.061 2.0 mm Threaded Drill Guide with DepthGauge, 2 ea.
323.062 2.0 mm Drill Bit with Depth Mark, quickcoupling, 140 mm, 2 ea.
323.202 2.4 mm Universal Drill Guide
323.26 2.7 mm Universal Drill Guide
Modular Graphic Case System Reference Guide Synthes 47
01.116.029
Tray
60.116.029 Instrument Tray for 2.7 mmCortex /Locking/VA Locking Screws, 3.5mm Cortex /Locking Screws, and 4.0 mmCancellous Screws, 1/3 Length, forModular Graphic Case System
Set
01.116.029 2.7 mm Cortex/Locking/VA LockingScrews, 3.5 mm Cortex /Locking Screws,and 4.0 mm Cancellous Screws InstrumentSet, 1/3 Length, for Modular Graphic Case System
Instruments
03.110.002 Torque Limiting Attachment, 1.2 Nm03.110.005 Handle for Torque Limiting Attachment
03.211.001 2.4 mm/2.7 mm VA-LCP Plate HoldingPins, 2 ea.
03.211.003 2.0 mm Variable Angle Locking Drill Guide,Variable
03.211.004 2.0 mm Variable Angle Locking Drill Guide,Coaxial
310.25 2.5 mm Drill Bit, quick coupling, gold, 110 mm, 2 ea.
310.26 2.7 mm Drill Bit, quick coupling, 100 mm,2 ea.
310.288 2.8 mm Drill Bit, quick coupling, 165 mm,2 ea.
310.35 3.5 mm Drill Bit, quick coupling, 110 mm,2 ea.
310.87 Countersink for 2.7 mm Cortex Screws
310.89 Countersink for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws
311.43 Handle with quick coupling
312.648 2.8 mm Threaded Drill Guide , 2 ea.
314.03 Small Hexagonal Screwdriver Shaft
314.06 Holding Sleeve for use with Small HexScrewdriver Shafts
314.116 StarDrive Screwdriver Shaft quick coupling,T15
314.467 StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.
319.01 Depth Gauge
323.061 2.0 mm Threaded Drill Guide, 2 ea.
323.062 2.0 mm Drill Bit with Depth Mark, quickcoupling, 140 mm, 2 ea.
323.26 2.7 mm Universal Drill Guide
323.36 3.5 mm Universal Drill Guide
511.773 Torque Limiting Attachment, 1.5 Nm, quick coupling
48 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins1/3 Length Trays
01.116.031
Tray
60.116.031 Instrument Tray for Small FragmentPlate /Wire Instruments, 1/3 Length, for Modular Graphic Case System
Set
01.116.031 Small Fragment Plate and Wire InstrumentSet, 1/3 Length, for Modular Graphic CaseSystem
Instruments
324.023 Threaded Plate Holder
324.024 Push-Pull Reduction Device
329.04 Bending Iron for 2.7 mm and 3.5 mm Plates
329.05 Bending Iron for 2.7 mm and 3.5 mm Plates
329.07 Bending Iron for 2.7 mm and 3.5 mmReconstruction Plates, 2 ea.
329.820 Bending Template, 12 Holes, for 3.5 mm LC-DCP and DCP and LCP Plates
329.87 Bending Template, 7 Holes, for 3.5 mmLC-DCP and DCP Plates
329.89 Bending Template, 9 Holes, for 3.5 mmLC-DCP and DCP Plates
391.82 Wire-Bending Pliers, 160 mm
392.00 Bending Iron for 1.25 mm, 1.6 mm and2.0 mm Kirschner Wires
398.811 Plate Holding Forceps with Swivel Foot,Size 0
Modular Graphic Case System Reference Guide Synthes 49
01.116.032
Tray60.116.032 Instrument Tray for Small Fragment
Retractors, Forceps, 1/3 Length, for ModularGraphic Case System
Set01.116.032 Small Fragment Retractor /Forceps
Instrument Set, 1/3 Length, for ModularGraphic Case System
Instruments319.39 Sharp Hook
398.40 Reduction Forceps with Points, narrow ratchet, 132 mm
398.41 Reduction Forceps with Points, broad ratchet
399.091 Bone Holding Forceps, soft ratchet, forplates to 9 mm wide narrow tip, 160 mm,2 ea.
399.36 Periosteal Elevator, 6 mm, curved blade,round edge
399.49 Hohmann Retractor, 15 mm, 160 mm, 2 ea.
399.99 Reduction Forceps with Serrated Jaw,ratchet, 144 mm, 2 ea.
50 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins1/3 Length Trays
01.116.033
Tray
60.116.033 Instrument Tray for Mini Fragment GeneralInstruments, 1/3 Length, for ModularGraphic Case System
Set
01.116.033 Mini Fragment General Instruments Set, 1/3 Length, for Modular Graphic CaseSystem
Instruments
319.39 Sharp Hook
329.12 Bending Pliers, smooth jaws, for mini plates,2 ea.
398.41 Reduction Forceps with Points Broad, ratchet
398.95 Termite Forceps, 90 mm
399.18 Small Hohmann Retractor, 6 mm, shortnarrow tip, 160 mm
399.19 Small Hohmann Retractor, 8 mm, shortnarrow tip, 160 mm
399.48 Periosteal Elevator, 3 mm, curved blade,straight edge
399.481 Periosteal Elevator, 3 mm, curved blade,round edge
399.49 Hohmann Retractor, 15 mm, 160 mm, 2 ea.
399.97 Reduction Forceps with Points, ratchet, 130 mm
Modular Graphic Case System Reference Guide Synthes 51
Instrument Trays and Bins
2/3 Length Trays
Tray60.116.010 General Instrument Tray, 2 /3 Length,
for Modular Graphic Case System
Set01.116.010 General Instrument Set, 2 /3 Length,
for Modular Graphic Case System
Instruments311.43 Handle with quick coupling
319.39 Sharp Hook
329.04 Bending Iron for 2.7 mm and 3.5 mm Plates
329.05 Bending Iron for 2.7 mm and 3.5 mm Plates
329.12 Bending Pliers for 1.5 mm/2.0 mm plates
391.962 Bending/Cutting Pliers
398.41 Reduction Forceps with Points, broad,ratchet, 132 mm
398.95 Termite Forceps, 90 mm
399.18 Small Hohmann Retractor
399.19 Small Hohmann Retractor, 2 ea.
399.36 Periosteal Elevator
399.49 Hohmann Retractor, 2 ea.
399.97 Reduction Forceps, with points, 130 mm,ratchet
399.98 Reduction Forceps
399.99 Reduction Forceps, 2 ea.
01.116.010
52 Synthes Modular Graphic Case System Reference Guide
Instrument Trays and Bins
Auxiliary Trays
60.116.1132/3 length
60.116.1141/3 length
60.116.0072/3 length, 1/2 width
60.116.007 Auxiliary Tray, 2/3 Length, 1/2 Width
60.116.113 Auxiliary Tray, 2/3 Length
60.116.114 Auxiliary Tray, 1/3 Length
Modular Graphic Case System Reference Guide Synthes 53
Instrument Trays and Bins
Instrument Bins
60.116.025
60.116.024
Instrument Bin60.116.024 Instrument Bin for 2.0 mm Cortex /Locking Screws for Screw Module Shell, for Modular Graphic Case SystemSet01.116.024 2.0 mm Cortex /Locking Screws Instrument Set for Screw Module Shell, for Modular Graphic Case SystemInstruments03.111.005 Depth Gauge for 2.0 mm, 2.4 mm and 2.7 mm screws310.201 2.0 mm Drill Bit, 65 mm310.507 1.5 mm Drill Bit, 96 mm310.972 Countersink for 2.0 mm and 2.4 mm screws311.01 Handle with mini quick coupling312.22 2.0 mm/1.5 mm Double Drill Sleeve313.843 2.0 mm StarDrive Screwdriver Shaft SD6, self-retaining323.201 2.0 mm Universal Drill Guide323.034 1.5 mm Threaded Drill Guide with Depth Gauge329.921 Threaded Bending Bin for 2.0 mm LCP Plates
Instrument Bin60.116.025 Instrument Bin for 2.4 mm Cannulated Screws for Screw Module Shell, for Modular Graphic Case SystemSet01.116.025 2.4 mm Cannulated Screws Instrument Set
for Screw Module Shell, for Modular Graphic Case SystemInstruments292.619 0.8 mm Guide Wire, 100 mm310.215 1.7 mm Cannulated Drill Bit, quick coupling, 100 mm310.803 Cannulated Countersink for 2.4 mm Cannulated Screws311.43 Handle with quick coupling312.145 1.7 mm/0.8 mm Double Drill Sleeve314.466 Cannulated StarDrive Screwdriver Shaft, T8314.467 StarDrive Screwdriver Shaft, T8, 105 mm319.289 1.0 mm Cleaning Brush319.293 0.8 mm Cleaning Sylet319.703 Measuring Device for 2.4 mm cannulated screws
54 Synthes Modular Graphic Case System Reference Guide
60.116.053 Screw Module Auxiliary Bin, 2 /3 Length
Instrument Trays and Bins
Auxiliary Bin
56 Synthes Modular Graphic Case System Reference Guide
Modular Graphic CasesFull Length Graphic Cases
Graphic Cases are designed to holdscrew modules, plate modules, screwracks and/or instrument trays.
Note: Screw racks can only be housedin the full length graphic cases60.116.001 and 60.116.002.
Modular Graphic Case System Reference Guide Synthes 57
60.116.003 Graphic Case, Full Length,1 High
60.116.001 Graphic Case, Full Length,4 Bay
60.116.002 Graphic Case, Full Length,2 Bay
Possible Configurations
58 Synthes Modular Graphic Case System Reference Guide
Modular Graphic Cases
2/3 Length Graphic Cases
Graphic Cases are designed to holdscrew modules, plate modules, screwracks and/or instrument trays.
Note: Screw racks can only be housedin the full length graphic cases60.116.001 and 60.116.002.
Modular Graphic Case System Reference Guide Synthes 59
60.116.006 Graphic Case, 2/3 Length,1 High
60.116.004 Graphic Case, 2/3 Length,4 Bay
60.116.005 Graphic Case, 2/3 Length,2 Bay
Possible Configurations
Modular Graphic Case System Reference Guide Synthes 61
60.116.014 Support Screws for trays and screw racks,for use with full length Modular GraphicCases
Used to configure back section of fulllength graphic cases
– Prevents movement of screw racks and instrument trays
– Elevates screw racks and instrument trays
One pack of support screws is includedwith full length graphic cases.
Accessories
60.116.013 Assembly Screws for Screw Module Shell
Used to assemble Screw Blocks and Flip-upScrew Racks into the Screw Module Shel
One pack of assembly screws is included with the screw module shell, 60.116.050
60.116.054 Module Adapters for 1 High Modules
Prevents 1 High modules from movingwithin the Modular Graphic Cases
Accessories
62 Synthes Modular Graphic Case System Reference Guide
Modular Graphic Case System Reference Guide Synthes 63
60.116.120 Assembly Clip for Screw Rack Shell
Used to lock Screw Rack Blocks in place within Screw Rack Shell
One assembly clip is included with eachscrew rack block
68.000.119 Unlocking Tool for Screw Rack Shell
Used to unlock Screw Rack Blocks fromScrew Rack Shell
One unlocking tool is included with eachscrew rack shell, 60.116.100
64 Synthes Modular Graphic Case System Reference Guide
Accessories
Graphic Case60.116.015 Replacement Lid, Full Length
60.116.016 Replacement Lid, 2/3 Length
60.116.014 Support Screws for Trays and Screw Racks,for use with full length Modular GraphicCases
60.116.054 Module Adapters for 1 High Modules
Screw Module Shell60.116.051 Replacement Lid for Screw Module Shell
60.116.013 Assembly Screws for Screw Module Shell
Module Shell60.116.115 Replacement Lid for Module Shell
Screw Rack60.116.098 Replacement Lid for Screw Rack Shell
60.116.120 Assembly Clip for Screw Rack Shell
68.000.119 Unlocking Tool for Screw Rack Shell
Label Packs, for Screws and Instruments
60.116.552 1.5 mm HCS
60.116.553 2.0 mm
60.116.554 2.4 mm
60.116.555 2.7 mm
60.116.556 3.0 mm
60.116.557 3.5 mm
60.116.559 4.0 mm
60.116.560 4.5 mm
60.116.561 5.0 mm
Modular Graphic Case System Reference Guide Synthes 65
Screw Length Markers/Screw Type MarkersScrew length markers and screw type markers areused to label the contents of screw modules andscrew racks. Available as sets and sold separately.
Note: All markers come as 5 packs.
Screw Length Marker/Screw Type Marker Sets01.116.530 Screw Type Marker Push Pin Set
Length Marker Push Pin Sets
01.116.531 6 mm–30 mm, all sizes
01.116.532 6 mm–30 mm, 2 mm increments
01.116.533 6 mm–40 mm, 2 mm increments
01.116.534 6 mm–60 mm, 2 mm increments
01.116.535 6 mm–60 mm, all sizes
01.116.536 65 mm–95 mm, all sizes
Screw Module
Screw Rack
Screw type markers
Screw lengthmarkers
Screw typemarkers
Screw lengthmarkers
66 Synthes Modular Graphic Case System Reference Guide
Accessories
Screw Type Push Pins60.116.500 16 mm thread
60.116.501 32 mm thread
60.116.502 Fully threaded
60.116.503 Buttress
60.116.504 Cancellous
60.116.505 Cannulated
60.116.506 Conical
60.116.507 Cortex
60.116.508 Headless compression screw
60.116.509 Headless compression screw, 1.5 mm
60.116.511 Headless compression screw, 2.4 mm
60.116.512 Headless compression screw, 3.0 mm
60.116.513 Locking
60.116.514 Long thread
60.116.515 Pelvic
60.116.516 Self-drilling
60.116.517 Self-tapping
60.116.518 Shaft
60.116.519 Short thread
60.116.520 Malleolar
60.116.521 Variable angle locking
60.116.523 Cannulated variable angle locking
60.116.525 Variable angle buttress
60.116.452 Blank
Length Marker Push Pins
60.116.306 6 mm 60.116.340 40 mm
60.116.307 7 mm 60.116.342 42 mm
60.116.308 8 mm 60.116.344 44 mm
60.116.309 9 mm 60.116.345 45 mm
60.116.310 10 mm 60.116.346 46 mm
60.116.311 11 mm 60.116.348 48 mm
60.116.312 12 mm 60.116.350 50 mm
60.116.313 13 mm 60.116.352 52 mm
60.116.314 14 mm 60.116.354 54 mm
60.116.315 15 mm 60.116.355 55 mm
60.116.316 16 mm 60.116.356 56 mm
60.116.317 17 mm 60.116.358 58 mm
60.116.318 18 mm 60.116.360 60 mm
60.116.319 19 mm 60.116.362 62 mm
60.116.320 20 mm 60.116.364 64 mm
60.116.321 21 mm 60.116.365 65 mm
60.116.322 22 mm 60.116.366 66 mm
60.116.323 23 mm 60.116.368 68 mm
60.116.324 24 mm 60.116.370 70 mm
60.116.325 25 mm 60.116.372 72 mm
60.116.326 26 mm 60.116.375 75 mm
60.116.327 27 mm 60.116.376 76 mm
60.116.328 28 mm 60.116.380 80 mm
60.116.329 29 mm 60.116.385 85 mm
60.116.330 30 mm 60.116.390 90 mm
60.116.332 32 mm 60.116.395 95 mm
60.116.334 34 mm 60.116.451 Blank
60.116.335 35 mm
60.116.336 36 mm
60.116.338 38 mm
Synthes (USA)1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
© 2011 Synthes, Inc. or its affiliates. All rights reserved. DCP, LC-DCP, LCP and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 6/11 J9790-A
www.synthes.com