Upload
vuongthien
View
214
Download
1
Embed Size (px)
Citation preview
Dear Friends,
It is indeed an honour for me to
address all members of the
Suppliers’ Club and I thank you all
for choosing me as the President of
the club.
The Honda philosophy has always
been - the joy of Buying, Selling and
Making Honda Cars. As a part of
the supplier fraternity, we are all well versed with the joy of selling
Honda products. I request the active participation of all Suppliers’
Club Members to continue supporting this philosophy.
Last year we had an overwhelming response for all the activities and
for this I would like to thank all members who were an integral part of
this team.
This year we have initiated sub-activities like safety support in
training, besides the ongoing activities of 5S, Quality Circle and
Kaizen, through which we have had contributions from new members.
However, active participation from existing suppliers in the club is a
matter of concern. I sincerely request all senior professionals of the
suppliers fraternity to take greater initiative in various functions of
the Suppliers’ Club.
As Honda Suppliers, we stay committed towards the environment and
its protection. Hence, beginning this year, we will be taking steps to
try & promote water conservation and safety awareness in the club.
I welcome your suggestions.
Warm regards,
Rajeev Sikand,President- Suppliers’ Club(Group CEO- Alicon Castalloy Limited)
www.hscisuppliersclub.comvisit us
A Newsletter of Suppliers Club Issue No. 17 / 2013
Okayama CastleOkayama Castle is a Japanese castle in the city of
Okayama in the Okayama Prefecture in Japan.
Today, only a few parts of Okayama Castle's roof
(including the fish-shaped-gargoyles) are gilded in
gold, but prior to the Battle of Sekigahara the
main keep also featured gilded roof tiles, earning
it the nickname Golden Crow Castle.
Construction of Okayama Castle was started in
1573 by Ukita Naoie and completed by his son
Hideie in 1597. The reconstructed castle is a
concrete building complete with air-conditioning,
elevators and numerous displays documenting the
castle's history.
Executive Committee Members 2013-14 ADVISORY SUPPORT : ALL PAST PRESIDENTS OF SUPPLIERS CLUB
Coordinator Meetings were held on 18th May and 2nd August at Uniproducts (India) Ltd. All Club Coordinators gathered under one roof to discuss the future plans and club activities for the current financial year.
Coordinators’Meeting
Gearing up for business
Regional Chapter Chairman
Member Designation in Club Company
Mr. Rajeev Sikand
Mr. F.R. Singhvi
President
South Region
Alicon Castalloy
Sansera
Dr. Ashwan Kapur
Mr. Milind Godbole
Vice President
West Region
Uniproducts India Ltd.
Honeywell
Dr. Alka Kaul Secretary & Treasurer Horizon Industrial Products Pvt. Ltd.
Mr. Naveen Agarwal Member Sanden Vikas India Ltd.
Mr. Kapil Gupta Member Polyplastics Industries India Pvt. Ltd.
Mr. I. Kojima Member Nissin Brake
Mr. H. Ueshima Member Motherson Sumi Systems Ltd.
Mr. Rajesh Goel Coordinator – HCIL Honda Cars India Ltd.
Activity Coordinators 2013-14SUPPORT COORDINATORS
MemberDesignation
in ClubCompany E Mail ID Mobile No
Ms. Aarti Anandan Engage & Website Shriram Pistons & Rings Ltd. [email protected] 9810077007
Mr. Dhananjay Kulkarni Co-ordinator of President Allicon Castolloy [email protected] 9561099740
Ms. Monika Bhilare Western Region Coordinator Honeywell [email protected] 8888876042
Mr. Farhan Kidwai Coordinator of Vice President Uniproducts (India) Ltd. [email protected] 9818494449
Mr. Mohit Sehgal Kaizen Coordinator Lumax Industries Ltd. [email protected] 9811318909
Mr. Prag Taneja 5’S Coordinator Motherson Sumi Systems Ltd. [email protected] 9654592590
Mr. Pratul Swarup Safety Coordinator Asahi India Glass Ltd. [email protected] 9310067470
Ms. Rachna Mehta HCIL Support Member Honda Cars India Ltd [email protected] 9810601991
Mr. Raja Chaturvedi B K Southern Region Coordinator Sansera Engineering [email protected] 9663922746
Mr. Sarabjeet Singh Plant Visit Coordinator Sanden Vikas India Ltd. [email protected] 9313460022
Mr. Dhananjay Kulkarni
President Desk & QC (Alicon)
Ms. Aarti AnandanWebsite & Magazine
(SPRL)
Mr. Mohit SehgalKaizen
(Lumax)
Mr. Prag Taneja5S Activity
(MSSL)
Mr. Pratul SwarupSafety (AIS)
Coordinators
Mr. Sarabjeet Singh
Plant Visit (Sanden)
Mr. Farhan Kidwai
Golf(Uniproducts)
Ms. Rachna MehtaClub Support
Member
Club Support Member
Ms. Monika Bhilare Western
(Honeywell)
Mr. Raja Chaturvedee
Southern (Sanserra)
Regional ChapterCoordinators
Mr. Rajeev SikandPresident(Alicon)
Dr. A Kapur Vice President(Uniproduct)
Dr. Alka Kaul Secretary &
Treasurer (Horizon)
Mr. Hideaki Ueshima
Member (MSSL)
Mr. Ichihei KojimaMember
(Nissin Brake)
Mr. Kapil GuptaMember
(Polyplastics)
Mr. Rajesh GoelCoordinator
(HCIL)
Mr. F.R. Singhvi Southern
(Sanserra)
Mr. Milind GodboleWestern
(Honeywell)
Mr. N. AgarwalMember
(Sanden )
Club Functioning – Based on PDCA
The 4th Suppliers’ Club Coordinators Meeting was held on 2nd August 2013 at Noida Office of M/s Uniproducts (India) Limited,
C 15, Sector 57, Noida 201307 (U.P.) India to discuss/
debate and discuss improvement opportunities.
P D C AActivity
HeadMain Theme
QC
Kaizen
5S
Safety
Theme DetailControl
ItemAchievement
StandardProgress
Gap Analysis
Challenge & Plan
Regional Level Competition
To involve maximum employee from suppliers &
Motivate them50%
60%
25%
40%
50%
10%
15%
15%
20%
25%
25%
10%
10%
70%
17%
24%
16%
22%
42%
8%
12%
22%
4%
8%
12%
17%
5%
34%
33%
36%
9%
18%
8%
2%
2%
3%
6%
7%
8%
8%
5%
36%
Maximum Participation
Expert Training by (QCFI )
Participation
Participation
Participation
Participation
Participation
Hand holding
Participation
Participation
Participation
Participation
Support
Participation
SPRL
PPAP
MSSL
LUMAX
LUMAX
SPRL
MSSL
MSSL
ASAHI
ASAHI
ASAHI
ASAHI
SPRL
TAKATA
Participation
Honda Support for QC
Honda Way - Kaizen Training
EHS Category added
QCFI Training started
Benchmark Visit
Honda Way-5S Training
Mentor Mentee Program &
Training by QCFI
Safety Visit & Audit
KY – Implementation
Behavior Based safety training
Safety Support program
Preliminary 5S Audit
QC & 5s Training through Honda Faculty trainers.
To start the Kaizen activity
Increase EHS awareness & Kaizen participation.
Structured approach training
To Start 5S activity
To learn & Share the Honda 5S way
To involve more participation
Create awareness regarding safety
Employee participation in safety activity.
Accident reduction through BBS
Shop floor orientation safety
To assess the progress in 5S
QCFI TrainingEngaged QCFI for training
across all regions.
Participation
is the
Biggest
Concern
Area
SUCCESS
1st Executive Committee Meeting at Honda Cars India Ltd. – 2013-14
Reviewing the strategies of the Club
Let's get down to work
The First Executive Committee Meeting to mark the beginning of the new financial year was held on 12th April at Honda Cars India Ltd. wherein all Activity Coordinators presented their achievements and plan for the next year. The members were highly enthused to 'engage' in the developmental activities during the year ahead. The dedication of the members towards the club activities is quiet encouraging and this is what that makes the Suppliers’ Club a unique club!
The new Executive Committee Members were welcomed in to the Suppliers’ Club.
Executive Committee Regional Chairman
Executive Committee Members 2013-14 ADVISORY SUPPORT : ALL PAST PRESIDENTS OF SUPPLIERS CLUB
Coordinator Meetings were held on 18th May and 2nd August at Uniproducts (India) Ltd. All Club Coordinators gathered under one roof to discuss the future plans and club activities for the current financial year.
Coordinators’Meeting
Gearing up for business
Regional Chapter Chairman
Member Designation in Club Company
Mr. Rajeev Sikand
Mr. F.R. Singhvi
President
South Region
Alicon Castalloy
Sansera
Dr. Ashwan Kapur
Mr. Milind Godbole
Vice President
West Region
Uniproducts India Ltd.
Honeywell
Dr. Alka Kaul Secretary & Treasurer Horizon Industrial Products Pvt. Ltd.
Mr. Naveen Agarwal Member Sanden Vikas India Ltd.
Mr. Kapil Gupta Member Polyplastics Industries India Pvt. Ltd.
Mr. I. Kojima Member Nissin Brake
Mr. H. Ueshima Member Motherson Sumi Systems Ltd.
Mr. Rajesh Goel Coordinator – HCIL Honda Cars India Ltd.
Activity Coordinators 2013-14SUPPORT COORDINATORS
MemberDesignation
in ClubCompany E Mail ID Mobile No
Ms. Aarti Anandan Engage & Website Shriram Pistons & Rings Ltd. [email protected] 9810077007
Mr. Dhananjay Kulkarni Co-ordinator of President Allicon Castolloy [email protected] 9561099740
Ms. Monika Bhilare Western Region Coordinator Honeywell [email protected] 8888876042
Mr. Farhan Kidwai Coordinator of Vice President Uniproducts (India) Ltd. [email protected] 9818494449
Mr. Mohit Sehgal Kaizen Coordinator Lumax Industries Ltd. [email protected] 9811318909
Mr. Prag Taneja 5’S Coordinator Motherson Sumi Systems Ltd. [email protected] 9654592590
Mr. Pratul Swarup Safety Coordinator Asahi India Glass Ltd. [email protected] 9310067470
Ms. Rachna Mehta HCIL Support Member Honda Cars India Ltd [email protected] 9810601991
Mr. Raja Chaturvedi B K Southern Region Coordinator Sansera Engineering [email protected] 9663922746
Mr. Sarabjeet Singh Plant Visit Coordinator Sanden Vikas India Ltd. [email protected] 9313460022
Mr. Dhananjay Kulkarni
President Desk & QC (Alicon)
Ms. Aarti AnandanWebsite & Magazine
(SPRL)
Mr. Mohit SehgalKaizen
(Lumax)
Mr. Prag Taneja5S Activity
(MSSL)
Mr. Pratul SwarupSafety (AIS)
Coordinators
Mr. Sarabjeet Singh
Plant Visit (Sanden)
Mr. Farhan Kidwai
Golf(Uniproducts)
Ms. Rachna MehtaClub Support
Member
Club Support Member
Ms. Monika Bhilare Western
(Honeywell)
Mr. Raja Chaturvedee
Southern (Sanserra)
Regional ChapterCoordinators
Mr. Rajeev SikandPresident(Alicon)
Dr. A Kapur Vice President(Uniproduct)
Dr. Alka Kaul Secretary &
Treasurer (Horizon)
Mr. Hideaki Ueshima
Member (MSSL)
Mr. Ichihei KojimaMember
(Nissin Brake)
Mr. Kapil GuptaMember
(Polyplastics)
Mr. Rajesh GoelCoordinator
(HCIL)
Mr. F.R. Singhvi Southern
(Sanserra)
Mr. Milind GodboleWestern
(Honeywell)
Mr. N. AgarwalMember
(Sanden )
Club Functioning – Based on PDCA
The 4th Suppliers’ Club Coordinators Meeting was held on 2nd August 2013 at Noida Office of M/s Uniproducts (India) Limited,
C 15, Sector 57, Noida 201307 (U.P.) India to discuss/
debate and discuss improvement opportunities.
P D C AActivity
HeadMain Theme
QC
Kaizen
5S
Safety
Theme DetailControl
ItemAchievement
StandardProgress
Gap Analysis
Challenge & Plan
Regional Level Competition
To involve maximum employee from suppliers &
Motivate them50%
60%
25%
40%
50%
10%
15%
15%
20%
25%
25%
10%
10%
70%
17%
24%
16%
22%
42%
8%
12%
22%
4%
8%
12%
17%
5%
34%
33%
36%
9%
18%
8%
2%
2%
3%
6%
7%
8%
8%
5%
36%
Maximum Participation
Expert Training by (QCFI )
Participation
Participation
Participation
Participation
Participation
Hand holding
Participation
Participation
Participation
Participation
Support
Participation
SPRL
PPAP
MSSL
LUMAX
LUMAX
SPRL
MSSL
MSSL
ASAHI
ASAHI
ASAHI
ASAHI
SPRL
TAKATA
Participation
Honda Support for QC
Honda Way - Kaizen Training
EHS Category added
QCFI Training started
Benchmark Visit
Honda Way-5S Training
Mentor Mentee Program &
Training by QCFI
Safety Visit & Audit
KY – Implementation
Behavior Based safety training
Safety Support program
Preliminary 5S Audit
QC & 5s Training through Honda Faculty trainers.
To start the Kaizen activity
Increase EHS awareness & Kaizen participation.
Structured approach training
To Start 5S activity
To learn & Share the Honda 5S way
To involve more participation
Create awareness regarding safety
Employee participation in safety activity.
Accident reduction through BBS
Shop floor orientation safety
To assess the progress in 5S
QCFI TrainingEngaged QCFI for training
across all regions.
Participation
is the
Biggest
Concern
Area
SUCCESS
1st Executive Committee Meeting at Honda Cars India Ltd. – 2013-14
Reviewing the strategies of the Club
Let's get down to work
The First Executive Committee Meeting to mark the beginning of the new financial year was held on 12th April at Honda Cars India Ltd. wherein all Activity Coordinators presented their achievements and plan for the next year. The members were highly enthused to 'engage' in the developmental activities during the year ahead. The dedication of the members towards the club activities is quiet encouraging and this is what that makes the Suppliers’ Club a unique club!
The new Executive Committee Members were welcomed in to the Suppliers’ Club.
Executive Committee Regional Chairman
Quality means doing it right when no one is looking
Kaizen TodayKaizen is a Japanese philosophy that focuses on continuous improvement throughout all aspects of life. When applied to the workplace, Kaizen activities continually improve all functions of a business, from manufacturing to management and from the CEO to the assembly line workers. By improving standardized activities and processes, Kaizen aims to eliminate waste and ensure continuous improvement and growth.
We had the great privilege of having Mr. Abhishek Sahi from the Honda Cars India Ltd., Geater Noida Plant who devoted time to present/guide & mentor all the participants.
Winners of the quarterQuality Improvement : Behr India Ltd. - Header resting change in-die.
Cost Reduction : Yazaki India Ltd. – To reduce separate master cost for all products.
Productivity Improvement : (1) Alicon Castalloy Ltd. – Core excess Inventory. (2) Honeywell Turbo Tech – Improve Productivity.
EHS : Enkei Wheels India Ltd. – Reduce Energy Cost.
Total 9 Suppliers companies participated & 27 Kaizen were reported.
Quality Circle, Kaizen & 5S by QCFI
Western Region
Mr. Rajeev Sikand & Mr. Milind Godbole inaugurating the Training Session
Mr. Rajesh Goel addressing the Session
QC, Kaizen & 5S Training in Progress
All participants with Mr. Rajesh Goel & QCFI faculty Mr. Bhupesh Mall
The training was held on 21st June’13 at Honeywell Turbotech, Pune. 17 supplier companies participated.
Northern RegionQuality Circle, Kaizen, 5S training by QCFI was held on 24th May 2013 at Honda Cars India Ltd. – Greater Noida for Northern Region. 60 Participants took oath for implementing QC, 5S & Kaizen activities.
Quality Circle, Kaizen & 5S Training Review
Every quarter, the training culture at the club has been spreading fast. The involvement and enthusiasm is evident from the news below:
5S to Get Rid of 1 S (sagasu = Search)
ACTIVITYUPDATES
5S originated, and is traditionally used, in manufacturing companies. The latent
power of “5S” has yet to be leveraged by service organizations in their offices. It is
not just another housekeeping technique, but an innovative management practice
that can transform service organizations.
The 5S campaign initiated by Suppliers’ Club has crossed significant milestones. All
the major suppliers from North / South as well as West India Chapter have joined this
movement and together gained from this effort. Regular audits are being conducted
to ensure sustainability of the benefits. Hand holding will be ensured for suppliers
who need to improve their performance in order to reach the minimum target (70%).
Suppliers’ Club has been successfully conducting various activities under guidance of
Honda Cars India Ltd. management and executive committee. The entire supplier
fraternity is getting benefits by sharing best practices amongst each other and there
have been tremendous improvements in the 5S level of many suppliers who have
participated in this activity over the past 8 years. Further to the activity calendar
released by the Suppliers’ Club President on 23rd April’ 2013, this year Honda Cars
India Ltd. has advised to conduct 5S Activity in plant and office area. The proposed
schedule for the 5S Audits/visits for F.Y. 2013-14 is as below:
Enhance and Enrich the Sustainability
Level of 5S for HCIL Suppliers
Motherson Sumi Systems Limited
Email: [email protected]
Prag Taneja
NORTH ZONE (June 2013 ~ July ’2013) • Alp Nishikawa, Chandigarh
• Indica Industries Pvt. Ltd., Noida• Microturner, Rohtak• Stumpp Schuele and Somappa Springs Pvt. Ltd., • Continental Automotive Components India P. Ltd.,
GurgaonGurgaon
• New Swan Autocomp Pvt. Ltd., Ludhiana SOUTH ZONE (October’ 2013)
• L.G. Balakrishnan & Bros Ltd., Coimbatore• Jay Ushin Limited, Gurgaon
• Sansera Engineering Pvt. Ltd., Bangalore• Anu Auto, Gurgaon
NORTH ZONE (August 2013 ~ September’ 2013)
• Gabriel India Ltd., Gurgaon
• Mahle Filter Systems (India) Ltd., Gurgaon
• SMR Automotive Systems India Ltd., Noida
• Sandhar (Painting Plant), Gurgaon
• Toyoda Gosei India Pvt. Ltd., Neemrana
• Bony Polymers, Faridabad
Selected Suppliers & Audit Schedule
Supplier Enrolled in 2012-13
Lumax Industries Ltd.
Email: [email protected]
Mohit Sehgal
Date of Trainings conducted
West Zone-21st June 2013
North Zone Batch-124th May 2013
South Zone Plannedon 17th Aug 13.
Batch-2 is plannedon 23rd Aug 2013
Venue
Honeywell TT, Pune
Honda Car India Ltd.
Asahi India Ltd.
No. of supplier members
participation in ‘13’
14
25
No. of Participants
36
60
Activity Zone
West
North
South
North
No. of suppliers participated in QC training in West-South-North
No of Suppliers No of Participants
West Zone-21st June
2013
North ZoneBatch-1 24th
May 2013
South ZonePlanned on
17th Aug 13.
Batch-2 isplanned on23rd Aug
2013
14
36
25
60
80
70
60
50
40
30
20
10
0
West South North
2011-12 2012-13 2013-14
No. of participants in QC, Kaizen & 5S Training
24 27 26 27
73
49
60
36
Continental Manesar enters
Honda Cars India Ltd.
Supplier Group
We at Continental Automotive Pvt. Ltd. in
Manesar, take this opportunity to thank HCIL
Supplier Group for visiting our plant as a part
of 5S pre-audit. It was a wonderful knowledge
sharing event, where our best practices were
shared with the HCIL team. Few improvement
opportunities were highlighted to the plant
team, which will be addressed at the earliest.
Continental, Manesar is committed to become
a preferred supplier to Honda Cars India Ltd.
Winners
The group!Mr. Abhishek Sahi from Honda Cars India Ltd. (Greater Noida) discussing
with Club Members
Quality means doing it right when no one is looking
Kaizen TodayKaizen is a Japanese philosophy that focuses on continuous improvement throughout all aspects of life. When applied to the workplace, Kaizen activities continually improve all functions of a business, from manufacturing to management and from the CEO to the assembly line workers. By improving standardized activities and processes, Kaizen aims to eliminate waste and ensure continuous improvement and growth.
We had the great privilege of having Mr. Abhishek Sahi from the Honda Cars India Ltd., Geater Noida Plant who devoted time to present/guide & mentor all the participants.
Winners of the quarterQuality Improvement : Behr India Ltd. - Header resting change in-die.
Cost Reduction : Yazaki India Ltd. – To reduce separate master cost for all products.
Productivity Improvement : (1) Alicon Castalloy Ltd. – Core excess Inventory. (2) Honeywell Turbo Tech – Improve Productivity.
EHS : Enkei Wheels India Ltd. – Reduce Energy Cost.
Total 9 Suppliers companies participated & 27 Kaizen were reported.
Quality Circle, Kaizen & 5S by QCFI
Western Region
Mr. Rajeev Sikand & Mr. Milind Godbole inaugurating the Training Session
Mr. Rajesh Goel addressing the Session
QC, Kaizen & 5S Training in Progress
All participants with Mr. Rajesh Goel & QCFI faculty Mr. Bhupesh Mall
The training was held on 21st June’13 at Honeywell Turbotech, Pune. 17 supplier companies participated.
Northern RegionQuality Circle, Kaizen, 5S training by QCFI was held on 24th May 2013 at Honda Cars India Ltd. – Greater Noida for Northern Region. 60 Participants took oath for implementing QC, 5S & Kaizen activities.
Quality Circle, Kaizen & 5S Training Review
Every quarter, the training culture at the club has been spreading fast. The involvement and enthusiasm is evident from the news below:
5S to Get Rid of 1 S (sagasu = Search)
ACTIVITYUPDATES
5S originated, and is traditionally used, in manufacturing companies. The latent
power of “5S” has yet to be leveraged by service organizations in their offices. It is
not just another housekeeping technique, but an innovative management practice
that can transform service organizations.
The 5S campaign initiated by Suppliers’ Club has crossed significant milestones. All
the major suppliers from North / South as well as West India Chapter have joined this
movement and together gained from this effort. Regular audits are being conducted
to ensure sustainability of the benefits. Hand holding will be ensured for suppliers
who need to improve their performance in order to reach the minimum target (70%).
Suppliers’ Club has been successfully conducting various activities under guidance of
Honda Cars India Ltd. management and executive committee. The entire supplier
fraternity is getting benefits by sharing best practices amongst each other and there
have been tremendous improvements in the 5S level of many suppliers who have
participated in this activity over the past 8 years. Further to the activity calendar
released by the Suppliers’ Club President on 23rd April’ 2013, this year Honda Cars
India Ltd. has advised to conduct 5S Activity in plant and office area. The proposed
schedule for the 5S Audits/visits for F.Y. 2013-14 is as below:
Enhance and Enrich the Sustainability
Level of 5S for HCIL Suppliers
Motherson Sumi Systems Limited
Email: [email protected]
Prag Taneja
NORTH ZONE (June 2013 ~ July ’2013) • Alp Nishikawa, Chandigarh
• Indica Industries Pvt. Ltd., Noida• Microturner, Rohtak• Stumpp Schuele and Somappa Springs Pvt. Ltd., • Continental Automotive Components India P. Ltd.,
GurgaonGurgaon
• New Swan Autocomp Pvt. Ltd., Ludhiana SOUTH ZONE (October’ 2013)
• L.G. Balakrishnan & Bros Ltd., Coimbatore• Jay Ushin Limited, Gurgaon
• Sansera Engineering Pvt. Ltd., Bangalore• Anu Auto, Gurgaon
NORTH ZONE (August 2013 ~ September’ 2013)
• Gabriel India Ltd., Gurgaon
• Mahle Filter Systems (India) Ltd., Gurgaon
• SMR Automotive Systems India Ltd., Noida
• Sandhar (Painting Plant), Gurgaon
• Toyoda Gosei India Pvt. Ltd., Neemrana
• Bony Polymers, Faridabad
Selected Suppliers & Audit Schedule
Supplier Enrolled in 2012-13
Lumax Industries Ltd.
Email: [email protected]
Mohit Sehgal
Date of Trainings conducted
West Zone-21st June 2013
North Zone Batch-124th May 2013
South Zone Plannedon 17th Aug 13.
Batch-2 is plannedon 23rd Aug 2013
Venue
Honeywell TT, Pune
Honda Car India Ltd.
Asahi India Ltd.
No. of supplier members
participation in ‘13’
14
25
No. of Participants
36
60
Activity Zone
West
North
South
North
No. of suppliers participated in QC training in West-South-North
No of Suppliers No of Participants
West Zone-21st June
2013
North ZoneBatch-1 24th
May 2013
South ZonePlanned on
17th Aug 13.
Batch-2 isplanned on23rd Aug
2013
14
36
25
60
80
70
60
50
40
30
20
10
0
West South North
2011-12 2012-13 2013-14
No. of participants in QC, Kaizen & 5S Training
24 27 26 27
73
49
60
36
Continental Manesar enters
Honda Cars India Ltd.
Supplier Group
We at Continental Automotive Pvt. Ltd. in
Manesar, take this opportunity to thank HCIL
Supplier Group for visiting our plant as a part
of 5S pre-audit. It was a wonderful knowledge
sharing event, where our best practices were
shared with the HCIL team. Few improvement
opportunities were highlighted to the plant
team, which will be addressed at the earliest.
Continental, Manesar is committed to become
a preferred supplier to Honda Cars India Ltd.
Winners
The group!Mr. Abhishek Sahi from Honda Cars India Ltd. (Greater Noida) discussing
with Club Members
My golfing companion of many years,
now a retired senior bureaucrat,
remarked the other day after hitting an
indifferent shot to the green , “Golf is
only incidental to golf”. There is a deep
meaning attached to the off-the-cuff
comment that he made. What he
meant was there is much more to golf
than hitting a perfect shot. Its an
experience far beyond just playing a
game.
To the uninitiated, golf is a sedentary
sport played by elderly persons with
bags of time at hand. However, to a
purist, it is life and philosophy rolled into
one. Played over 18 holes the main
objective of the game is to take a
minimum number of shots to complete
the round in about 4 hours or so.
The unwritten rule that must be adhered
to all times is punctuality. This is
observed by reaching the golf club well
ahead of the tee-off time- so to an avid
golfer reaching the club on time is
second nature.
Most golf clubs are very particular about
speed of play and impose penalty on
players for slow play. Here the guiding
principle is that whilst you may take over
an hour to drive to reach the golf club;
once play begins the players must
complete each hole without wasting
much time as others are just behind you
and need to finish in time too or else
the whole course would get into a grid
lock.
Showing courtesy to your playing
Lesson#1 – Be Punctual.
Lesson#2-Show due consideration to
others by performing your task on time.
Lesson #3- Established Etiquette/
Rules of the game are the same for all
& must be observed at all times.
companions at the golf course is de
rigueur. Whilst it is common to talk
between shots amongst golfers, but at
the time when a player is about to hit,
silence must be observed. Similarly,
divots must be repaired after hitting a
shot and pitch marks made by your ball
landing on soft green must be
smoothened out. These rules are
universally applied irrespective of the
player’s status.
Golfers while hitting their shots must
ensure safety of other players. Rules are
made such that the person farthest
away from the hole must hit first. It is
the duty of the player playing a shot to
ensure that no one ahead of him gets
injured by his golf ball.
During the game it is very difficult for
others to keep score of the shots taken
by a player to complete the hole. So it
becomes obligatory for a player to
submit the correct score at the end of
the game.
There may be certain days when a golfer
shall be dogged by bad luck. For
example, after executing a perfect shot
by sheer bad luck the ball hits the
sprinkler head and deflects into the
water. Losing his cool over the mishap
will only aggravate matters.
Are there any lessons to be learnt from
playing golf in addressing the current
recession? The recent slowdown of the
Indian economy has made many
companies conscious of the need to
improve competitiveness to stay afloat.
This time, it feels like the impact may be
Lesson # 4 Safety First
Lesson #5- Do onto others what you
expect others to do onto you.
Lesson# 6 -Learn to handle disasters
with equanimity.
the acceptance of huge workloads
where people will earn the same salary
but having to work much harder. This
perhaps explains the focus on discipline
( i.e. to accept the responsibilities
instead of looking only for instant
gratification) being an important
ingredient for today’s survival &
tomorrow’s success. Instilling discipline
in its workforce shall lead to significant
improvements in both the productivity
and quality of its manufactured goods
thereby giving the company a huge
competitive advantage.
I have asked several entrepreneurs in
India one question- what is the number
one problem preventing us from
becoming cost competitive-on par with
China and other Asian tigers? The
answer to the above has been usually
–‘Discipline’. The business leaders
today desire an element which is elusive
in our culture. According to me that
element is discipline. Perhaps applying
the aforementioned lessons learned
from playing golf to impose discipline in
the daily management of the employees
is the right cure to improve
competitiveness.
ExpertSpeak
Applying the lessons learned from playing golf to improve competitiveness Dr. Ashwan Kapur
Vice President - Suppliers’ Club(Uniproducts India Ltd.)
Be Safety Minded
Safety Update 2013-14
Safety Management System training program –
Safety management system training program was conducted for South Zone club members on May 30th, 2013 at Brakes India Limited, Padi, Chennai. This was a full day training program with broad agenda of addressing the following in details-
• Safety Management Systems training.
• Kiken Yochi - Danger Prediction training (KYT).
• Risk assessment of machines.
• Shop floor visit for best safety practices.
The program was attended by 41 members from 16 Suppliers with total of 266.5 man hours of safety training.
The training program was very well appreciated and club has received appreciation testimonials from the members, who had attended the program.
Highlights of Safety Training Program
Training was divided in four parts as –
• Part A
- Training program primarily focused upon imbibing “Safety Basics” and primarily focused upon –
- What is Safety? What is an accident?
- Safety preventive tools.
- How to build up safety culture? And Safety implementation
• Part B
Shop floor visit showcasing best practices related with “Safety”.
• Part C
- Training program on “Risk Assessment of Machines” – explaining –
- Purpose, Process flow, Methodology of Risk assessment.
- Procedure of carrying out risk assessment.
•
-Prediction (Kiken – Yochi) – a key safety preventive tool primarily addressing -
- Process / Methodology of carrying out danger prediction training.
- Explanation of “how to predict danger?”
Safety Results –
Safety Support Program -
“Safety Support Program” has been initiated from April 2013 for creating awareness and implementing “Safety in true sense”. It has been derived from the concept of hand holding & mentoring. Methodology for this program is as depicted below-
Safety updates- general –
5 Ss for Slips, Trips and Falls (STFs)
Slips, trips, and falls (STFs) are notorious workplace hazards that cause a lot of injuries and add to costs, productivity losses, and worker absences. Strong action should be initiated against STFs with the 5Ss strategies.
It is recommended to adopt an innovative approach for looking at slips, trips, and falls
Part D
Training program on “Danger
New Initiatives planned for 2013-14
in keeping with the 5S Japanese workplace organization system. The five strategies are-
1. SEIRI - Sort. It starts with organizing and straightening the workplace and making sure that aisles and walkways are free of trip and fall hazards.
2. SEITON - Set in order. This involves understanding the efficiency of motion and workflow and ordering steps and movement
3. SEISO - Shine. This refers to eliminating all forms of contamination, such as dirt, fluids, or liquids, which could cause bone-breaking slips.
4. SEIKUTSU - Standardize. Standardizing is about organizing, labeling, and bringing order. It includes the concept of "visual management," which involves the use of signs and other ways to order the work environment and communicate visually
5. SHITSUKE - Sustain. The last strategy is maintaining progress achieved through the other strategies. The goal is to make the improvements systemic and long-lasting.
In addition, following should also be kept under constant surveillance :
• Keep lights clean. When lights are covered with dust and dirt, the light they provide is obscured, which increases the risk of Slip, trip and falls (STF’s).
• Watch for transition points. Study your workplace to become aware of the transition points from concrete to tile, tile to carpet, carpet to marble, etc. If these are a source of STFs, they should be eliminated or altered.
Slips, Trips, and Falls should be approached in a systematic way like other business problems, commensurate with the tremendous risk they present. The need of the hour is to raise the concern immediately as and when any anomaly is found and ensure that countermeasures are implemented to avoid any type of STF’s related injuries or illness.
Asahi India Glass Ltd.
Email: [email protected]
Pratul Swarup
SAFETYSTARTS WITH
YOU!
YOU ARE THEKEY......
TO YOUR SAFETY
S
A
F
E
SMART
ALERT
FOCUSSED
EDUCATED
1500
1000
500
0Number ofSuppliers
Number ofparticipants
Total Man-hours
105200
1200
46 111
666
112218
13082010-11 2011-12 2012-13
Visit of Safety Team
Presentation of “Safety status / systems by
respective plant team
Feedback on the current Safety status
by visiting Safety team
Finalization of time schedule for next
‘Safety Support’ visit.
Note - Safety support visit to be planned once in three months.
Deciding upon way forward – the most
feasible and practical
Activities/tasks to be accomplished - next
visit.
Shop floor visit for understanding Safety
implementation status
Safety Management System training by the
Safety Coordinator
Safety isn't expensive, its priceless.
My golfing companion of many years,
now a retired senior bureaucrat,
remarked the other day after hitting an
indifferent shot to the green , “Golf is
only incidental to golf”. There is a deep
meaning attached to the off-the-cuff
comment that he made. What he
meant was there is much more to golf
than hitting a perfect shot. Its an
experience far beyond just playing a
game.
To the uninitiated, golf is a sedentary
sport played by elderly persons with
bags of time at hand. However, to a
purist, it is life and philosophy rolled into
one. Played over 18 holes the main
objective of the game is to take a
minimum number of shots to complete
the round in about 4 hours or so.
The unwritten rule that must be adhered
to all times is punctuality. This is
observed by reaching the golf club well
ahead of the tee-off time- so to an avid
golfer reaching the club on time is
second nature.
Most golf clubs are very particular about
speed of play and impose penalty on
players for slow play. Here the guiding
principle is that whilst you may take over
an hour to drive to reach the golf club;
once play begins the players must
complete each hole without wasting
much time as others are just behind you
and need to finish in time too or else
the whole course would get into a grid
lock.
Showing courtesy to your playing
Lesson#1 – Be Punctual.
Lesson#2-Show due consideration to
others by performing your task on time.
Lesson #3- Established Etiquette/
Rules of the game are the same for all
& must be observed at all times.
companions at the golf course is de
rigueur. Whilst it is common to talk
between shots amongst golfers, but at
the time when a player is about to hit,
silence must be observed. Similarly,
divots must be repaired after hitting a
shot and pitch marks made by your ball
landing on soft green must be
smoothened out. These rules are
universally applied irrespective of the
player’s status.
Golfers while hitting their shots must
ensure safety of other players. Rules are
made such that the person farthest
away from the hole must hit first. It is
the duty of the player playing a shot to
ensure that no one ahead of him gets
injured by his golf ball.
During the game it is very difficult for
others to keep score of the shots taken
by a player to complete the hole. So it
becomes obligatory for a player to
submit the correct score at the end of
the game.
There may be certain days when a golfer
shall be dogged by bad luck. For
example, after executing a perfect shot
by sheer bad luck the ball hits the
sprinkler head and deflects into the
water. Losing his cool over the mishap
will only aggravate matters.
Are there any lessons to be learnt from
playing golf in addressing the current
recession? The recent slowdown of the
Indian economy has made many
companies conscious of the need to
improve competitiveness to stay afloat.
This time, it feels like the impact may be
Lesson # 4 Safety First
Lesson #5- Do onto others what you
expect others to do onto you.
Lesson# 6 -Learn to handle disasters
with equanimity.
the acceptance of huge workloads
where people will earn the same salary
but having to work much harder. This
perhaps explains the focus on discipline
( i.e. to accept the responsibilities
instead of looking only for instant
gratification) being an important
ingredient for today’s survival &
tomorrow’s success. Instilling discipline
in its workforce shall lead to significant
improvements in both the productivity
and quality of its manufactured goods
thereby giving the company a huge
competitive advantage.
I have asked several entrepreneurs in
India one question- what is the number
one problem preventing us from
becoming cost competitive-on par with
China and other Asian tigers? The
answer to the above has been usually
–‘Discipline’. The business leaders
today desire an element which is elusive
in our culture. According to me that
element is discipline. Perhaps applying
the aforementioned lessons learned
from playing golf to impose discipline in
the daily management of the employees
is the right cure to improve
competitiveness.
ExpertSpeak
Applying the lessons learned from playing golf to improve competitiveness Dr. Ashwan Kapur
Vice President - Suppliers’ Club(Uniproducts India Ltd.)
Be Safety Minded
Safety Update 2013-14
Safety Management System training program –
Safety management system training program was conducted for South Zone club members on May 30th, 2013 at Brakes India Limited, Padi, Chennai. This was a full day training program with broad agenda of addressing the following in details-
• Safety Management Systems training.
• Kiken Yochi - Danger Prediction training (KYT).
• Risk assessment of machines.
• Shop floor visit for best safety practices.
The program was attended by 41 members from 16 Suppliers with total of 266.5 man hours of safety training.
The training program was very well appreciated and club has received appreciation testimonials from the members, who had attended the program.
Highlights of Safety Training Program
Training was divided in four parts as –
• Part A
- Training program primarily focused upon imbibing “Safety Basics” and primarily focused upon –
- What is Safety? What is an accident?
- Safety preventive tools.
- How to build up safety culture? And Safety implementation
• Part B
Shop floor visit showcasing best practices related with “Safety”.
• Part C
- Training program on “Risk Assessment of Machines” – explaining –
- Purpose, Process flow, Methodology of Risk assessment.
- Procedure of carrying out risk assessment.
•
-Prediction (Kiken – Yochi) – a key safety preventive tool primarily addressing -
- Process / Methodology of carrying out danger prediction training.
- Explanation of “how to predict danger?”
Safety Results –
Safety Support Program -
“Safety Support Program” has been initiated from April 2013 for creating awareness and implementing “Safety in true sense”. It has been derived from the concept of hand holding & mentoring. Methodology for this program is as depicted below-
Safety updates- general –
5 Ss for Slips, Trips and Falls (STFs)
Slips, trips, and falls (STFs) are notorious workplace hazards that cause a lot of injuries and add to costs, productivity losses, and worker absences. Strong action should be initiated against STFs with the 5Ss strategies.
It is recommended to adopt an innovative approach for looking at slips, trips, and falls
Part D
Training program on “Danger
New Initiatives planned for 2013-14
in keeping with the 5S Japanese workplace organization system. The five strategies are-
1. SEIRI - Sort. It starts with organizing and straightening the workplace and making sure that aisles and walkways are free of trip and fall hazards.
2. SEITON - Set in order. This involves understanding the efficiency of motion and workflow and ordering steps and movement
3. SEISO - Shine. This refers to eliminating all forms of contamination, such as dirt, fluids, or liquids, which could cause bone-breaking slips.
4. SEIKUTSU - Standardize. Standardizing is about organizing, labeling, and bringing order. It includes the concept of "visual management," which involves the use of signs and other ways to order the work environment and communicate visually
5. SHITSUKE - Sustain. The last strategy is maintaining progress achieved through the other strategies. The goal is to make the improvements systemic and long-lasting.
In addition, following should also be kept under constant surveillance :
• Keep lights clean. When lights are covered with dust and dirt, the light they provide is obscured, which increases the risk of Slip, trip and falls (STF’s).
• Watch for transition points. Study your workplace to become aware of the transition points from concrete to tile, tile to carpet, carpet to marble, etc. If these are a source of STFs, they should be eliminated or altered.
Slips, Trips, and Falls should be approached in a systematic way like other business problems, commensurate with the tremendous risk they present. The need of the hour is to raise the concern immediately as and when any anomaly is found and ensure that countermeasures are implemented to avoid any type of STF’s related injuries or illness.
Asahi India Glass Ltd.
Email: [email protected]
Pratul Swarup
SAFETYSTARTS WITH
YOU!
YOU ARE THEKEY......
TO YOUR SAFETY
S
A
F
E
SMART
ALERT
FOCUSSED
EDUCATED
1500
1000
500
0Number ofSuppliers
Number ofparticipants
Total Man-hours
105200
1200
46 111
666
112218
13082010-11 2011-12 2012-13
Visit of Safety Team
Presentation of “Safety status / systems by
respective plant team
Feedback on the current Safety status
by visiting Safety team
Finalization of time schedule for next
‘Safety Support’ visit.
Note - Safety support visit to be planned once in three months.
Deciding upon way forward – the most
feasible and practical
Activities/tasks to be accomplished - next
visit.
Shop floor visit for understanding Safety
implementation status
Safety Management System training by the
Safety Coordinator
Safety isn't expensive, its priceless.
Suppliers’ Club members got together for the MD & CEOs Meet at Hotel Hyatt Pune on 19th July 2013. Inspired by the theme "Forward Strides" the members engaged at both formal and informal platforms to ensure progress towards meeting the Club's objectives.
An excellent presentation on the “HONDA WAY” by Paranjpe San from Honda left the audience mesmerized and proud to be associated with HONDA. The panel discussion on Cost Competitiveness, moderated by Manoj Kolhatkar San, and Goel San as one of the panelist, left all asking for more. The event rounded-off with a gala dinner and everyone hitting the dance floor.
F RWARD STRIDES
MD & CEOs Meet
Book your date for the Golf Tournament. Cheers to the Club!15th February 2014
Plant VisitWith an objective of ‘Gaining by Sharing’ plant visits are being regularly organised to share knowledge and good work practices. Recently, Suppliers’ Club members visited M/s Honeywell on 19th of July in Pune. We thank Honeywell for their excellent hospitality extended to all Executive Committee & Suppliers members.
Executive Committee MeetingWand providing their inputs in making the club stronger.
e are now witnessing 100% participation in Executive Committee Meetings. All suppliers are actively participating Western Region
Sanden Vikas (India) Ltd.
Email: [email protected]
Sarabjeet Singh
Suppliers’ Club members got together for the MD & CEOs Meet at Hotel Hyatt Pune on 19th July 2013. Inspired by the theme "Forward Strides" the members engaged at both formal and informal platforms to ensure progress towards meeting the Club's objectives.
An excellent presentation on the “HONDA WAY” by Paranjpe San from Honda left the audience mesmerized and proud to be associated with HONDA. The panel discussion on Cost Competitiveness, moderated by Manoj Kolhatkar San, and Goel San as one of the panelist, left all asking for more. The event rounded-off with a gala dinner and everyone hitting the dance floor.
F RWARD STRIDES
MD & CEOs Meet
Book your date for the Golf Tournament. Cheers to the Club!15th February 2014
Plant VisitWith an objective of ‘Gaining by Sharing’ plant visits are being regularly organised to share knowledge and good work practices. Recently, Suppliers’ Club members visited M/s Honeywell on 19th of July in Pune. We thank Honeywell for their excellent hospitality extended to all Executive Committee & Suppliers members.
Executive Committee MeetingWand providing their inputs in making the club stronger.
e are now witnessing 100% participation in Executive Committee Meetings. All suppliers are actively participating Western Region
Sanden Vikas (India) Ltd.
Email: [email protected]
Sarabjeet Singh
largest Exported
pistons and rings
from india !
WORLD-CLASS COMPONENTS ARE MADE OF WHOLE NEW INGREDIENTS.
FOR INSTANCE. PASSION AND COMMITMENT FOR EXCELLENCE,
largest Exported
pistons and rings
from india !
WORLD-CLASS COMPONENTS ARE MADE OF WHOLE NEW INGREDIENTS.
FOR INSTANCE. PASSION AND COMMITMENT FOR EXCELLENCE,
Printed & Published by Aarti Anandan c/o Shriram Pistons & Rings Ltd., E-mail : [email protected]
HCIL Suppliers Club functions strictly on “not-for-profit” basis. It was decided in the Executive Committee Meeting to make the newsletter self-sustaining by inviting Suppliers to release advertisements in the “Engage”. They will have a wide readership comprising people directly connected with the Auto and Auto Component Industry, and specifically with Honda. We will be happy to receive your advertisement in the next issue of “Engage”. Please send the ad in an open corel draw file format only, alongwith cheque payable to HCIL Suppliers Club Society. Since we have limited space, ads will be accepted strictly on “first-come-first-served” basis. For further information, please contact the undersigned.
Global Update
All-New Fit Hybrid Achieves Fuel Economy of 36.4 km/L, More than 35% Improvement
The all-new Fit Hybrid will be the first model to be equipped with the SPORT HYBRID*3 Intelligent Dual Clutch Drive (i-DCD), Honda's lightweight and compact one-motor hybrid system suited for small-sized vehicles. Although this is a one-motor hybrid system, this system realizes the EV drive by disengaging the engine and motor. The SPORT HYBRID i-DCD is one of the Earth Dreams Technology, Honda's new-generation powertrain technologies which realize both the fun of driving and excellent fuel economy at a high level.
New Honda MPV to Make World Debut at the 21st Indonesia International Motor Show
The new Honda MPV was developed for the Asian market by Honda R&D Asia Pacific Co., Ltd. in Thailand and P.T. Honda R&D Indonesia. This model will be the first Honda product in Indonesia to be introduced to the entry level MPV segment,
the biggest category in the Indonesian automobile market. In addition to offering seven seats in a 3-row configuration, the new Honda MPV features an innovative design, spacious cabin, and advanced safety which is already a hallmark of every Honda product. The new Honda MPV will be powered by a 1.5L gasoline engine, which provides both sporty performance and good fuel efficiency.
EditorialWe are back with this
quarter issue of Engage.
With the new design and
layout, we hope that you
will find the issue more
interesting and helpful.
A major tragedy has been
the recent disaster in
Uttarakhand. Many have lost their lives and
many more are hurt and severely affected by
this natural calamity.
Let's take every possible step to improve
infrastructure and meet the optimum
potential of every components of our supply
chain.
Together, we can foster greater integration
amongst ourselves and address our
concerns and eventually emerge successful.
Recently, I came across an interesting article
and would like to share it with you all. Hope
you enjoy it.
"It's been said that a smile is the lighting
system of the face, the cooling system of the
head and the heating system of the heart.
But a smile is also a powerful weapon
against toxic attitudes of all kinds.
Lisa Gurnsey, of Portland, Oregon, wrote to
me about a man whose smile quite literally
changed her life: "I was having a horrible day
-- hating my job, tired of the weather, tired of
trying to keep up on bills, and just completely
stressed out. I stopped at the post office in
the morning and, as I was entering, an older
business man commented to me that it was
going to be a good day and life shouldn't be
as bad as I make it look. I glared at him and
simply said, 'I wish it was Friday.'
"I felt better about my day when I left the
post office...that man's smile and comment,
although irritating at first, made me think.
“The second time I ran into the man I
went out of my way to say 'Happy Friday'
to him and to smile. I saw him a few more
times and always he was cheery and
'made my day.'
Aarti AnandanActivity Coordinator :
News Magazine & Club [email protected]
Backbone of the Suppliers Club
Rachna MehtaHCIL Support Coordinator