Parts

are

not

orig

inal

equ

ipm

ent p

arts

and

are

not

spo

nsor

ed, a

ffi lia

ted

or o

ther

wis

e co

nnec

ted

with

any

maj

or b

rand

.

5

MU

FFLE

RS

/ EX

HA

US

T P

IPE

S A-521017M91 Muffler 3.00 Lbs. Horizontal / Round Body - 4 1/4” Shell Diameter

Dim/Info: A: 3 1/4” INLET LENGTH B: 1” INLET I.D. C: 5 1/2” SHELL LENGTH D: 1/2” OUTLET LENGTH E: 1” OUTLET O.D. F: 9” OVERALL LENGTH

For Models: (10, 12 ALL W/ KOHLER 10 OR 12 HP 1 CYLINDER ENGINE)

A-182609M91 Muffler 4.00 Lbs. Vertical or Horizontal / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 2 1/2” INLET LENGTH B: 1 15/16” INLET I.D. C: 15 1/2” SHELL LENGTH D: 2” OUTLET LENGTH E: 1 3/8” OUTLET O.D. F: 18 1/2” OVERALL LENGTH

A-CL200 MUFFLER CLAMPS 1.00 Lbs. A-CL112 1-1/2” MUFFLER CLAMPS 1.00 Lbs.

For Models: (F40, 50 ALL W/ GAS OR LP ENGINES 1957-1964)

A-180364M91 Muffler 4.00 Lbs. Horizontal / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 2 1/2” INLET LENGTH B: 1 1/2” INLET I.D. C: 23” SHELL LENGTH D: 8 1/2” OUTLET LENGTH E: 1 1/2” OUTLET O.D. F: 34” OVERALL LENGTH

A-CL112 Muffler Clamp 1.00 Lbs.For Models: (TE20, TO20, TO30 ALL 1948-1954 W/ GAS OR DIESEL ENGINE), (TO35, 35 ALL 1955-1963 W/ GAS OR DIESEL ENGINE), 135 1964-1974 W/ GAS OR DIESEL ENGINE

A-181460M1 Exhaust Pipe 4.00 Lbs. For Horizontal Exhaust (Use With 505545M92 Muffler)

Dim/Info: A: FLARED INLET B: 18” VERTICAL LENGTH C: 23” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-MF300 Muffler Clamp 1.00 Lbs.For Models: (TO20, TO30 ALL W/ GAS ENGINE)

A-MF1610 Horizontal Exhaust Assembly 7.00 Lbs. One Piece Assembly Includes Muffler & Pipe. Inlet is Flared, Uses MF300 Clamp Available Sperately

Dim/Info: 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA.

For Models: (TO20, TO30 ALL W/ GAS ENGINE 1948-1957)

A-MF1810 Vertical Exhaust Kit 8.00 Lbs. Two Piece Assembly Includes Muffler & Pipe. Inlet is Flared, Uses MF300 Clamp Available Seperately

Dim/Info: A: 10 1/2” MUFFLER SHELL B: 3 1/4” SHELL DIAMETER C: 17 1/2” PIPE LENGTH D: 1 1/2” OUTLET DIAMETER

A-RC0 1-1/2”-1-11/16” WEATHER CAP 1.00 Lbs.For Models: (TO20, TO30 ALL W/ GAS ENGINE 1948-1957)

A-MF1910 Vertical Muffler Assembly 8.00 Lbs. One Piece Assembly Includes Muffler & Pipe. Inlet Pipe is Flared, Uses MF300 Clamp Available Seperately

Dim/Info: 10 1/4” MUFFLER SHELL LG. 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA.

A-RC0 1-1/2”-1-11/16” WEATHER CAP 1.00 Lbs.For Models: (TO20, TO30 ALL W/ GAS ENGINE 1948-1957)

A-MF2010 Exhaust Pipe 4.00 Lbs. Used On Tractors With Vertical Exhaust

Dim/Info: A: FLARED INLET B: 29” VERTICAL LENGTH C: 13” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-MF300 Muffler Clamp 1.00 Lbs.

For Models: (TO20, TO30 ALL W/ GAS ENGINE & VERTICAL EXHAUST)

A-MF7010 Horizontal Muffler Assembly 6.00 Lbs. One Piece Assembly Includes Muffler, Inlet Pipe & Clamp

Dim/Info: 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA. 3 BOLT FLANGE ON PIPE

For Models: (TO35, 35, 202, 203, 204, 205 ALL W/ GAS OR DIESEL ENGINE)

A-MF8010 Vertical Muffler Assembly 8.00 Lbs. One Piece Assembly Includes Muffler & Pipe

Dim/Info: 10 1/4” MUFFLER SHELL LGT 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA. 3 BOLT BASE PLATE ON PIPE

A-RC0 1-1/2”-1-11/16” WEATHER CAP 1.00 Lbs.For Models: TO35 W/ GAS OR DIESEL ENGINE 1955-1957

A-MF9010 Vertical Muffler Kit 8.00 Lbs. Two Piece Kit Includes Muffler & Pipe

Dim/Info: 10 1/2” MUFFLER SHELL LGT 3 1/4” MUFFLER SHELL DIA. 17 1/2” PIPE LENGTH 1 1/2” PIPE OUTLET DIA. 3 BOLT FLANGE ON PIPE

A-RC0 1-1/2”-1-11/16” WEATHER CAP 1.00 Lbs.For Models: TO35 W/ GAS & DIESEL ENGINE 1955-1957

A-508825M94 Muffler 4.00 Lbs. Horizontal / Round Body - 3 1/4” Shell Diameter (When used on 290 Model Application, Also use 898534M1 OEM Tailpipe)

Dim/Info: A: 2 3/4” INLET LENGTH B: 2” INLET I.D. C: 16 1/2” SHELL LENGTH D: 12 1/2” OUTLET LENGTH E: 2” OUTLET O.D. F: 32” OVERALL LENGTH

A-CL200 MUFFLER CLAMPS 1.00 Lbs.For Models: (30, 20, 31, 32, 40B, 50 ALL W/ GAS OR DIESEL ENGINE), (230, 240, 250 ALL W/ GAS OR DIESEL PERKINS ENGINE), 290 W/ GAS OR DIESEL PERKINS ENG- ALSO USE 898534M1 OEM TAILPIPE

Massey Ferguson

MU

FFLE

RS

/ E

XH

AU

ST P

IPE

S

6

Parts are not original equipment parts and are not sponsored, affi liated or otherw

ise connected with any m

ajor brand.A-505545M92 Muffler 5.00 Lbs. Horizontal / Round Body - 3 1/4” Shell Diameter

Replaces: 180364M91 Dim/Info: A: 2 3/4” INLET LENGTH B: 1 1/2” INLET I.D. C: 21” SHELL LENGTH D: 11” OUTLET LENGTH E: 1 1/2” OUTLET O.D. F: 34” OVERALL LENGTH

A-CL112 1-1/2” MUFFLER CLAMPS 1.00 Lbs.For Models: 35, TO35

A-181600M92 Exhaust Pipe 3.20 Lbs. For Horizontal Exhaust

Replaces: 181600M91 Dim/Info: A: 3 BOLT INLET B: 18” VERTICAL LENGTH C: 20” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: (35, TO30 ALL W/ GAS ENGINE)

A-MF3210 Horizontal Exhaust Assembly 9.00 Lbs. One Piece Assembly Includes Muffler & Pipe

Dim/Info: 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA. 3 BOLT FLANGE- PIPE INLET

For Models: 35 W/ DIESEL ENGINE

A-189678M91 Exhaust Pipe 2.80 Lbs. For Horizontal Exhaust. Use with 180364M91 & 505545M92 Mufflers

Dim/Info: A: 3 BOLT INLET B: 22” VERTICAL LENGTH C: 26” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: 35 W/ GAS OR DIESEL ENGINE

A-182697M1 Exhaust Pipe 3.00 Lbs. For Vertical Exhaust

Dim/Info: A: 1 3/8” INLET I.D. B: 8” VERTICAL LENGTH C: 31” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: 40 W/ GAS ENGINE

A-182614M1 Exhaust Pipe 3.00 Lbs. For Horizontal Exhaust

Dim/Info: A: 1 3/8” INLET I.D. B: 12” VERTICAL LENGTH C: 34” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: 50 MASSEY HARRIS & MASSEY FERGUSON W/ GAS ENGINE, 40 W/ GAS ENGINE

A-32999A Muffler 5.00 Lbs. Vertical / Round Body - 6” Shell Diameter

Dim/Info: A: 2” INLET LENGTH B: 2 3/8” INLET I.D. C: 14” SHELL LENGTH D: 5” OUTLET LENGTH E: 2 1/2” OUTLET O.D. F: 21” OVERALL LENGTH

A-CL212 Muffler Clamp 1.00 Lbs. A-RC3 Muffler Rain Cap 1.00 Lbs.

For Models: (55, 55K, 555 ALL MASSEY HARRIS 1942-1957)

A-187184M1 Muffler 6.00 Lbs. Vertical Or Horizontal/ Round Body - 3 1/4” Shell Dimension

Dim/Info: A: 2 3/4” INLET LENGTH B: 1 3/4” INLET I.D. C: 20” SHELL LENGTH D: 11” OUTLET LENGTH E: 1 3/4” OUTLET O.D. F: 34” OVERALL LENGTH

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 65 W/ GAS OR DIESEL ENGINE - USED AS VERTICAL, 50 W/ GAS OR DIESEL ENGINE - USED AS VERTICAL OR HORIZONTAL

A-184209M2 Exhaust Pipe 6.00 Lbs. For Horizontal Exhaust. Use With 184207M91 Muffler

Dim/Info: A: CLAMP ON INLET B: 12” VERTICAL LENGTH C: 34” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: 65 W/ GAS ENGINE

A-186886M91 Muffler 6.00 Lbs. Horizontal / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 2 1/4” INLET LENGTH B: 1 3/4” INLET I.D. C: 23” SHELL LENGTH D: 15 1/2” OUTLET LENGTH E: BENT TUBE F: 40” OVERALL LENGTH

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 65 W/ DIESEL ENGINE 1958-1964

A-MF2710 Vertical Exhaust Kit 7.00 Lbs. Two Piece Kit Includes Muffler & Pipe

Dim/Info: 12” MUFFLER SHELL LENGHT 4 1/4” MUFFLER SHELL DIA. 17 1/2” PIPE LENGTH 2” OUTLET PIPE O.D.

A-RC2 Muffler Rain Cap 1.00 Lbs.For Models: 65 W/ PERKINS DIESEL ENGINE

A-513563M92 Muffler 8.00 Lbs. Vertical / Round Body - 5 1/2” Shell Diameter

Dim/Info: A: 9 1/2” INLET LENGTH B: 2 3/4” INLET I.D. C: 17” SHELL LENGTH D: 5 1/2” OUTLET LENGTH E: 2 3/4” OUTLET O.D. F: 32” OVERALL LENGTH

A-CL234 Muffler Clamp 1.00 Lbs. A-RC7 Muffler Rain Cap 1.00 Lbs.

For Models: 1080 W/ 4 CYLINDER GAS ENGINE, 1100 SN <9B24395; W/ GAS OR DIESEL ENGINE, 70 W/ GAS OR DIESEL ENGINE

A-530690M91 Muffler 9.00 Lbs. Vertical / Oval Body - 5” x 11” Shell Dimension. Round Body Muffler 513563M92 is also available for these Applications

Replaces: 522422M92 Dim/Info: A: 10.00” INLET LENGTH B: 2 3/4” INLET I.D. C: 16.00” SHELL LENGTH D: 6 1/2” OUTLET LENGTH E: 2 3/4” OUTLET O.D. F: 32.00” OVERALL LENGTH

A-CL234 Muffler Clamp 1.00 Lbs. A-RC7 Muffler Rain Cap 1.00 Lbs.

For Models: (70, 80 ALL W/ GAS OR DIESEL ENGINE), 1080 W/ 4 CYLINDER GAS OR DIESEL ENGINE

Massey Ferguson

Parts

are

not

orig

inal

equ

ipm

ent p

arts

and

are

not

spo

nsor

ed, a

ffi lia

ted

or o

ther

wis

e co

nnec

ted

with

any

maj

or b

rand

.

7

MU

FFLE

RS

/ EX

HA

US

T P

IPE

S A-187269M91 Muffler 6.00 Lbs. Vertical / Round Body - 4 1/4” Shell Diameter

Dim/Info: A: 15” INLET LENGTH B: 2 3/16” INLET I.D. C: 14 1/2” SHELL LENGTH D: 8” OUTLET LENGTH E: 2 1/4” OUTLET O.D. F: 38” OVERALL LENGTH

A-CL214 Muffler Clamp 1.00 Lbs. A-RC3 Muffler Rain Cap 1.00 Lbs.

For Models: (85, 88 ALL W/ GAS & LP ENGINES 1958-1962)

A-187553M92 Muffler 6.00 Lbs. Vertical / Round Body - 4 1/4” Shell Diameter

Dim/Info: A: 11 1/4” INLET LENGTH B: 2 1/4” INLET I.D. C: 14 1/2” SHELL LENGTH D: 10 1/2” OUTLET LENGTH E: 2 1/4” OUTLET O.D. F: 37” OVERALL LENGTH

A-CL214 2-1/4” MUFFLER CLAMPS 1.00 Lbs. A-RC3 Muffler Rain Cap 1.00 Lbs.

For Models: (85, 88, 90 ALL W/ DIESEL ENGINE)

A-190435M92 Muffler 6.00 Lbs. Vertical / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 11 1/2” INLET LENGTH B: 2 1/8” INLET I.D. C: 14 1/2” SHELL LENGTH D: 10 1/2” OUTLET LENGTH E: 2 1/4” OUTLET O.D. F: 37” OVERALL LENGTH

A-CL214 2-1/4” MUFFLER CLAMPS 1.00 Lbs. A-RC3 Muffler Rain Cap 1.00 Lbs.

For Models: 90 W/ GAS & LP ENGINES

A-1022401M1 Muffler 8.00 Lbs. Vertical / Round Body - 6” Shell Diameter

Dim/Info: A: 1 1/2” INLET LENGTH B: 3 15/16” INLET I.D. C: 19” SHELL LENGTH D: 3 1/4” OUTLET LENGTH E: 4” OUTLET O.D. F: 24” OVERALL LENGTH

A-CL400 Muffler Clamp 1.00 Lbs. A-RC9 Muffler Rain Cap 1.75 Lbs.

For Models: 97 W/ DIESEL ENGINE 1962-1964

A-767994M91 Muffler 4.00 Lbs. Horizontal / Round Body - 4 1/4” Shell Diameter

Replaces: 32289A Dim/Info: A: 2” INLET LENGTH B: 2 3/8” INLET I.D. C: 14” SHELL LENGTH D: 5” OUTLET LENGTH E: 2 1/2” OUTLET O.D. F: 21” OVERALL LENGTH

A-CL212 Muffler Clamp 1.00 Lbs. A-RC3 Muffler Rain Cap 1.00 Lbs.

For Models: (101 JR., 101 SR., 102 SR., 20, 22, 30, 33, 333, 44, 44 SPECIAL, 44D, 44K, 444, 81 ALL MASSEY HARRIS W/ GAS OR DIESEL ENGINE 1942-1957), 22K MASSEY HARRIS W/ GAS OR DIESEL ENGINE 1942-1957 EXCEPT 1948, (COM-BINE: 82 MASSEY HARRIS W/ GAS OR DIESEL ENGINE 1942-1957)

A-MF3410 Vertical Exhaust Assembly 7.00 Lbs. One Piece Assembly Includes Muffler & Pipe

Dim/Info: 12” MUFFLER SHELL LENGHT 3 1/4” MUFFLER SHELL DIA. 1 1/2” PIPE OUTLET DIA. 3 BOLT BASE PLATE ON PIPE MUFFLER N/A SEPERATELY PIPE N/A SEPERATELY

A-RC1 Muffler Rain Cap 1.00 Lbs.For Models: (TO35, 35 ALL W/ PERKINS DIESEL ENGINE)

A-539525M91 Muffler 7.00 Lbs. Horizontal / Round Body - 4 1/4” Shell Diameter

Dim/Info: A: 12” INLET LENGTH B: 1 3/4” INLET I.D. C: 15” SHELL LENGTH D: 12” OUTLET LENGTH E: 1 3/4” OUTLET O.D. F: 39” OVERALL LENGTH

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 135 U.K. MODEL ONLY W/ GAS OR DIESEL PERKINS ENGINE, (245, 255, 265, 275 ALL W/ DIESEL ENGINE), (230, 240, 250 ALL W/ GAS OR DIESEL ENGINE), 150 W/ GAS OR DIESEL PERKINS ENGINE

A-522584M92 Exhaust Pipe 3.00 Lbs. For Horizontal Exhaust. Use w/ 539525M91 Muffler

Dim/Info: A: 3 BOLT INLET B: 12” VERTICAL LENGTH C: 31 1/2” HORIZONTAL LGH D: 1 3/4” OUTLET O.D.

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 135 LATE MODEL W/ PERKINS 3 CYLINDER GAS & DIESEL ENGINES

A-194268M92 Exhaust Pipe 2.68 Lbs. For Horizontal Exhaust

Dim/Info: A: 3 BOLT INLET B: 13” VERTICAL LENGTH C: 31” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 135 W/ 4 CYLINDER CONTINENTAL GAS ENGINE

A-507518M92 Exhaust Pipe 4.00 Lbs. For Horizontal Exhaust (Use With 180364M91 & 505545M92 Muffler)

Dim/Info: A: 3 BOLT INLET B: 11 1/2” VERT. LENGTH C: 24” HORIZONTAL LENGTH D: 1 1/2” OUTLET O.D.

A-CL112 Muffler Clamp 1.00 Lbs.For Models: 135 EARLY MODEL W/ PERKINS 3 CYLINDER GAS & DIESEL ENGINE

A-MF3510 Vertical Exhaust Assembly 7.00 Lbs. One Piece Assembly Includes Muffler & Pipe

Dim/Info: 12” MUFFLER SHELL LENGTH 4 1/4” SHELL DIAMETER 1 3/4” PIPE OUTLET DIA. 3 BOLT FLANGE ON PIPE MUFFLER N/A SEPERATELY PIPE N/A SEPERATELY

A-RC1 Muffler Rain Cap 1.00 Lbs.For Models:

Massey Ferguson

MU

FFLE

RS

/ E

XH

AU

ST P

IPE

S

8

Parts are not original equipment parts and are not sponsored, affi liated or otherw

ise connected with any m

ajor brand.A-MF3610 Horizontal Exhaust Assembly 9.00 Lbs. One Piece Assembly Includes Muffler & Pipe

Replaces: 522589M91 & 522584M91 Dim/Info: 4 1/4” MUFFLER SHELL DIA. 1 3/4” PIPE OUTLET DIA. 3 BOLT FLANGE ON PIPE

For Models: 135 W/ PERKINS GAS & DIESEL ENGINES

A-894291M4 Muffler 7.33 Lbs.Replaces: CTJ2078

Dim/Info: A: 2” INLET LENGTH B: 2.150” INLET I.D. C: 18 1/2” SHELL LENGTH D: 21” OUTLET LENGTH E: 1.660” OUTLET I.D. F: 41 5/8 OVERALL LENGTH

For Models: 135, 148, 20D SN 850430> W/ Outside Hood Exhaust, 35, 550 SN 620661> W/ Outside Hood Exhaust, FE35, TEA20, TED20, TEF20

A-505404M91 Muffler 7.00 Lbs. Vertical / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 10” INLET LENGTH B: 1 3/4” INLET I.D. C: 17” SHELL LENGTH D: 10” OUTLET LENGTH E: 1 1/2” OUTLET O.D. F: 37” OVERALL LENGTH

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 150 EARLY SN W/ GAS OR DIESEL ENGINE

A-508826M92 Exhaust Pipe 4.00 Lbs. For Horizontal Exhaust

Dim/Info: A: 3 BOLT INLET B: 11” VERTICAL LENGTH C: 32” HORIZONTAL LENGTH D: 1 3/4” OUTLET O.D.

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 150 W/ GAS ENGINE

A-508523M92 Exhaust Pipe 5.00 Lbs. For Horizontal Exhaust. Use W/ 508825M94 Muffler For ThisApplication.

Dim/Info: A: 3 BOLT INLET B: 11” VERTICAL LENGTH C: 32” HORIZONTAL LENGTH D: 2” OUTLET O.D.

A-CL200 Muffler Clamp 1.00 Lbs.For Models: 150 W/ GAS OR DIESEL ENGINE EQUIPPED W/ GENERATOR NOT ALTERNATOR

A-194431M1 Muffler 7.00 Lbs. Vertical / Round Body - 4 1/4” Shell Diameter. This MufflerIs For Tractors With Loader

Dim/Info: A: 10” INLET LENGTH B: 2 1/8” INLET I.D. C: 16 1/2” SHELL LENGTH D: 13” OUTLET LENGTH E: BENT PIPE F: 40” OVERALL LENGTH

A-CL214 Muffler Clamp 1.00 Lbs.For Models: (165, 175, 180 ALL W/ PERKINS GAS OR DIESEL ENGINES - 4-236 & 4-248)

A-523394M1 Muffler 8.30 Lbs. Vertical / Round Body - 5 1/2” Shell Diameter. THIS MUFFLERIS FOR TRAC-TORS WITH OUT LOADER

Dim/Info: A: 8” INLET LENGTH B: 2 1/8” INLET I.D. C: 19 1/2” SHELL LENGTH D: 12 1/2” OUTLET LENGTH E: BENT PIPE F: 40” OVERALL LENGTH

A-CL214 Muffler Clamp 1.00 Lbs.For Models: (165, 175, 180 ALL W/ PERKINS GAS OR DIESEL ENGINES - 4-236 & 4-248)

A-898228M94 Exhaust 9.32 Lbs.Dim/Info: A: 2 1/2” INLET LENGTH B: 2 1/8” INLET I.D. C: 24 3/8” SHELL LENGTH D: 17 1/4” OUTLET LENGTH E: 1 3/4” OUTLET O.D. F: 44 3/4” OVERALL LENGTH

For Models: 165, 168, 174-4S, 175, 178, 185, 188, 274, 40, 50, 50E, 65, 765

A-1683796M3 Muffler 6.69 Lbs.Replaces: 1683796M1, 1661930M1, 1683796M2, 1688171M6, 1680260M2

Dim/Info: A: 6 1/2” INLET LENGTH B: 2 1/8” INLET O.D. C: 17 1/2” SHELL LENGTH D: 26 1/2” OUTLET LENGTH E: 1 5/8” OUTLET O.D. F: 50 5/8” OVERALL LENGTH

For Models: 20B, 20E, 230, 240, 250, 255, 340, 342, 350, 352, 355, 372, 550 SN 620661>

A-3510453M94 Muffler, Vertical 10.00 Lbs.Replaces: 3510453M93, 1475790M91, 3510453M91

For Models: (20F, 30E ALL W/ AD3.152), 30H W/ AD3.152, SN: 5109A0048 >, 40E W/ AT3.152.4, 50B W/ A4.212 & A4.236, (50B MKII, 50D ALL W/ A4.236), 50E W/ CURVED TOP & A4.236, 50EX W/ A4.236 & A4.248, (50H, 50H SERIES S, 50HX, 50HX SERIES S ALL W/ A4.236), (60H, 60H SERIES S ALL W/ A4.248)

A-181867M1 Muffler 6.00 Lbs. Vertical Or Horizontal / Round Body - 4 1/4” Shell Diameter

Replaces: 181867M91 Dim/Info: A: 3” INLET LENGTH B: 1 7/8” INLET I.D. C: 17” SHELL LENGTH D: 14 1/2” OUTLET LENGTH E: 2” OUTLET O.D. F: 34” OVERALL LENGTH

A-CL178 Muffler Clamp, Outlet 1.00 Lbs. A-RC2 Muffler Rain Cap 1.00 Lbs.

For Models: (202, 203, 204, 205 ALL W/ GAS OR DIESEL ENGINE), 35 W/ GAS OR DIESEL ENGINE 1960-1964, 135 W/ GAS OR DIESEL ENGINE 1964-1974

A-578090M1 Muffler 11.00 Lbs. Vertical / Oval Body - 4” X 8” Shell Dimension (Muffler Has Straight Outlet Pipe)

Dim/Info: A: 2 3/4” INLET LENGTH B: 2 1/8” INLET I.D. C: 23” SHELL LENGTH D: 8 1/2” OUTLET LENGTH E: 2” OUTLET O.D. F: 34” OVERALL LENGTH

A-CL214 Muffler Clamp 1.00 Lbs.For Models: (230, 235, 245, 255, 265, 275 ALL W/ GAS OR DIESEL ENGINE)

Massey Ferguson

Parts

are

not

orig

inal

equ

ipm

ent p

arts

and

are

not

spo

nsor

ed, a

ffi lia

ted

or o

ther

wis

e co

nnec

ted

with

any

maj

or b

rand

.

9

MU

FFLE

RS

/ EX

HA

US

T P

IPE

S A-3772138M1 Exhaust 15.00 Lbs.

Replaces: 1675390M91 1675390M92, 1673835M91, 1673835M92 Dim/Info: A: 16.00” Inlet length B: 2.125” Inlet I.D. C: 20.50” Shell Length D: 13.00” Outlet Length E: 2.25” Outlet O.D. F: 49.00” Overall Length

For Models: 265, 275, 290, 30D, 362, 372, 382, 382N S/N B18009>, 565, 575, 590

A-1693294M1 Muffler 12.05 Lbs.Dim/Info: A: 3.00” INLET LENGTH B: 3.00” INLET I.D. C: 24.00” SHELL LENGTH D: 19.25” OUTLET LENGTH E: 2.25” OUTLET O.D. F: 47.00” OVERALL LENGTH DIM

For Models: 298, 699

A-184207M91 Muffler 4.00 Lbs. Horizontal / Round Body - 3 1/4” Shell Diameter

Dim/Info: A: 2” INLET LENGTH B: 1 15/16” INLET I.D. C: 13 1/2” SHELL LENGTH D: 2 1/2” OUTLET LENGTH E: 1 3/8” OUTLET O.D. F: 18” OVERALL LENGTH

A-CL200 MUFFLER CLAMPS 1.00 Lbs. A-CL112 1-1/2” MUFFLER CLAMPS 1.00 Lbs.

For Models: (302, 304, 50, 65 ALL W/ GAS ENGINE)

A-673511M91 Elbow, Exhaust 4.40 Lbs. For horizontal exhaust

Replaces: 828194M91 Dim/Info: A: 3-Bolt Inlet I.D. B: 12” Vertical Length C: 34” Horizontal Length D: 1 3/4” Outlet O.D.

A-CL134 Muffler Clamp 1.00 Lbs.For Models: 302, 304, 50, 65

A-1694961M5 Muffler 12.33 Lbs.

For Models: 365, 375, 383, 390

A-1694963M5 Muffler 11.70 Lbs.

For Models: 390, 390T, 393, 398

A-1694965M1 Muffler 12.79 Lbs.

For Models: 399 W/ A6.354.4 Engine, 399 W/ Cab & 1006.6 Engine

A-1680877M92 Muffler 13.18 Lbs.Dim/Info: A: 6 1/2” INLET LENGTH B: 2 1/4” INLET O.D. C: 4 3/5” SHELL O.D. D: 27 1/2” OUTLET LENGTH E: 2 1/4” OUTLET O.D. F: 52 1/2” OVERALL LENGTH

For Models: 675, 690

A-1680589M1 Muffler 13.26 Lbs.

For Models: 698

A-3388434M1 Muffler 11.50 Lbs.

For Models: 3050 W/ A4.236, (6110, 6120 ALL W/ 4.41)

A-3582118M1 Muffler 8.00 Lbs.

For Models: 3065

A-3388432M2 Muffler 15.07 Lbs.

For Models: 3080 W/ A6.354.4, 3085 W/ 1006.6, 3090 W/ A6.354.4, (3095, 3115, 6160 ALL W/ 1006.6), 6170 W/ 1006.6, SN: < F014037

A-535950M1 Muffler 12.00 Lbs. Vertical / Oval Body - 6” X 10” Shell Dimension

Replaces: 539950M92, 529390M94 Dim/Info: A: 2 1/2” INLET LENGTH B: 2 3/4” INLET I.D. C: 17 1/2” SHELL LENGTH D: 4 1/2” OUTLET LENGTH E: 2 3/4” OUTLET O.D. F: 24” OVERALL LENGTH

A-CL234 Muffler Clamp 1.00 Lbs. A-RC7 Muffler Rain Cap 1.00 Lbs.

For Models: 1085 W/ DIESEL ENGINE

A-528068M92 Muffler 16.00 Lbs. Vertical / Oval Body - 6” x 10” Shell Dimension

Dim/Info: A: 3” INLET LENGTH B: 3 7/16” INLET I.D. C: 22” SHELL LENGTH D: 3 1/2” OUTLET LENGTH E: 3 1/2” OUTLET O.D. F: 28” OVERALL LENGTH

A-CL312 3-1/2” MUFFLER CLAMPS 1.00 Lbs. A-RC8 3-1/2”-3-11/16” WEATHER CAP 1.58 Lbs.

For Models: (1105, 1135 ALL W/ DIESEL ENGINE)

Massey Ferguson

MU

FFLE

RS

/ E

XH

AU

ST P

IPE

S

40

Parts are not original equipment parts and are not sponsored, affi liated or otherw

ise connected with any m

ajor brand.

A-EE112 Exhaust Extension 2.00 Lbs. Includes CL112 Inlet Clamp 1 1/2” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE134 Exhaust Extension 2.00 Lbs. Includes CL134 Inlet Clamp 1 3/4” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE200 Exhaust Extension 3.00 Lbs. Includes CL200 Inlet Clamp 2” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE214 Exhaust Extension 3.00 Lbs. Includes CL214 Inlet Clamp 2 1/4” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE212 Exhaust Extension 4.00 Lbs. Includes CL212 Inlet Clamp 2 1/2” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE234 Exhaust Extension 4.00 Lbs. Includes CL234 Inlet Clamp 2 3/4” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE300 Exhaust Extension 4.00 Lbs. Includes CL300 Inlet Clamp 3” INSIDE DIAMETER 18” OVERALL LENGTH

A-EE258 Exhaust Extension 3.00 Lbs. Includes CL258 Inlet Clamp 2 5/8” INSIDE DIAMETER 18” OVERALL LENGHT

A-EE312 Exhaust Extension 5.00 Lbs. Includes CL312 Inlet Clamp 3 1/2” INSIDE DIAMETER 20” OVERALL LENGTH

A-EE334 Exhaust Extension 6.00 Lbs. Includes CL334 Inlet Clamp 3 3/4” INSIDE DIAMETER 20” OVERALL LENGTH

A-EE400 Exhaust Extension 7.00 Lbs. Includes CL400 Inlet Clamp 4” INSIDE DIAMETER 20 1/2” OVERALL LENGTH

A-EE418 Exhaust Extension 7.00 Lbs. Includes CL412 Inlet Clamp 4 1/8” INSIDE DIAMETER 20 1/2” OVERALL LENGTH A-EE412 Exhaust Extension 8.00 Lbs. Includes CL412 Inlet Clamp 4 1/2” INSIDE DIAMETER 20 1/2” OVERALL LENGTH

A-EE500 Exhaust Extension 8.00 Lbs. Includes CL500 Inlet Clamp 5” INSIDE DIAMETER 21 1/2” OVERALL LENGTH For Models: SEVERAL

A-S112X24 Straight Pipe 3.00 Lbs. Includes CL112 Inlet Clamp(Uses RC0 Rain Cap Available Seperately) 1 1/2” INSIDE DIAMETER 24” OVERALL LENGTH

A-S134X24 Straight Pipe 4.00 Lbs. Includes CL134 Inlet Clamp(Uses RC1 Rain Cap Available Seperately) 1 3/4” INSIDE DIAMETER 24” OVERALL LENGTH

A-S200X24 Straight Pipe 4.00 Lbs. Includes CL200 Inlet Clamp(Uses RC2 Rain Cap Available Seperately) 2” INSIDE DIAMETER 24” OVERALL LENGTH

A-S214X24 Straight Pipe 5.00 Lbs. Includes CL214 Inlet Clamp(Uses RC5 Rain Cap Available Seperately) 2 1/4” INSIDE DIAMETER 24” OVERALL LENGTH

A-S238X24 Straight Pipe 5.00 Lbs. Includes CL212 Inlet Clamp(Used RC3 Rain Cap Available Seperately) 2 3/8” INSIDE DIAMETER 24” OVERALL LENGTH

A-S212X24 Straight Pipe 6.00 Lbs. Includes CL212 Inlet Clamp(Uses RC3 Rain Cap Available Seperately) 2 1/2” INSIDE DIAMETER 24” OVERALL LENGTH

A-S258X24 Straight Pipe 7.00 Lbs. Includes CL258 Inlet Clamp(Uses RC3 Rain Cap Available Seperately) 2 5/8” INSIDE DIAMETER 24” OVERALL LENGTH

A-S234X24 Straight Pipe 7.00 Lbs. Includes CL234 Inlet Clamp(Uses RC7 Rain Cap Available Seperately) 2 3/4” INSIDE DIAMETER 24” OVERALL LENGTH

A-S300X24 Straight Pipe 7.00 Lbs. Includes CL300 Inlet Clamp(Uses RC4 Rain Cap Available Seperately) 3” INSIDE DIAMETER 24” OVERALL LENGTH

A-S312X24 Straight Pipe 8.00 Lbs. Includes CL312 Inlet Clamp(Uses RC8 Rain Cap Available Seperately) 3 1/2” INSIDE DIAMETER ` 24” OVERALL LENGTH

A-S334X24 Straight Pipe 8.00 Lbs. Includes CL400 Inlet Clamp(Uses RC15 Rain Cap Available Seperately) 3 3/4” INSIDE DIAMETER 24” OVERALL LENGTH

A-S400X24 Straight Pipe 9.00 Lbs. Includes CL400 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 4” INSIDE DIAMETER 24” OVERALL LENGTH

A-S400X48 Straight Pipe 18.00 Lbs. Includes CL400 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S412X24 Straight Pipe 9.00 Lbs. Includes CL412 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 4 1/2” INSIDE DIAMETER 24” OVERALL LENGTH

A-S500X24 Straight Pipe 11.00 Lbs. Includes CL500 Inlet Clamp(Uses RC11 Rain Cap Available Seperately) 5” INSIDE DIAMETER 24” OVERALL LENGTH

A-S500X48 Straight Pipe 22.00 Lbs. Includes CL500 Inlet Clamp(Uses RC11 Rain Cap Available Seperately) 5” INSIDE DIAMETER 48” OVERALL LENGTH For Models: SEVERAL

Miscellaneous

Parts

are

not

orig

inal

equ

ipm

ent p

arts

and

are

not

spo

nsor

ed, a

ffi lia

ted

or o

ther

wis

e co

nnec

ted

with

any

maj

or b

rand

.

41

MU

FFLE

RS

/ EX

HA

US

T P

IPE

S

A-S112X48 Straight Pipe 6.00 Lbs. Includes CL112 Inlet Clamp(Uses RC0 Rain Cap Available Seperately) 1 1/2” INSIDE DIAMETER 48” OVERALL LENGTH

A-S134X48 Straight Pipe 8.00 Lbs. Includes CL134 Inlet Clamp(Uses RC1 Rain Cap Available Seperately) 1 3/4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S200X48 Straight Pipe 8.00 Lbs. Includes CL200 Inlet Clamp(Uses RC2 Rain Cap Available Seperately) 2” INSIDE DIAMETER 48” OVERALL LENGTH

A-S214X48 Straight Pipe 10.00 Lbs. Includes CL214 Inlet Clamp(Uses RC5 Rain Cap Available Seperately) 2 1/4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S238X48 Straight Pipe 10.00 Lbs. Includes CL212 Inlet Clamp(Uses RC3 Rain Cap Available Seperately) 2 3/8” INSIDE DIAMETER 48” OVERALL LENGTH

A-S212X48 Straight Pipe 12.00 Lbs. Includes CL212 Inlet Clamp(Uses RC3 Rain Cap Available Seperately) 2 1/2” INSIDE DIAMETER 48” OVERALL LENGTH

A-S258X48 Straight Pipe 14.00 Lbs. Includes CL258 Inlet Clamp(Uses RC3 Rain Cap Available Seperately) 2 5/8” INSIDE DIAMETER 48” OVERALL LENGTH

A-S234X48 Straight Pipe 14.00 Lbs. Includes CL234 Inlet Clamp(Uses RC7 Rain Cap Available Seperately) 2 3/4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S300X48 Straight Pipe 14.00 Lbs. Includes CL300 Inlet Clamp(Uses RC4 Rain Cap Available Seperately) 3” INSIDE DIAMETER 48” OVERALL LENGTH

A-S312X48 Straight Pipe 16.00 Lbs. Includes CL312 Inlet Clamp(Uses RC8 Rain Cap Available Seperately) 3 1/2” INSIDE DIAMETER 48” OVERALL LENGTH

A-S334X48 Straight Pipe 16.00 Lbs. Includes CL400 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 3 3/4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S400X48 Straight Pipe 18.00 Lbs. Includes CL400 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 4” INSIDE DIAMETER 48” OVERALL LENGTH

A-S412X48 Straight Pipe 18.00 Lbs. Includes CL412 Inlet Clamp(Uses RC10 Rain Cap Available Seperately) 4 1/2” INSIDE DIAMETER 48” OVERALL LENGTH

A-S500X48 Straight Pipe 22.00 Lbs. Includes CL500 Inlet Clamp(Uses RC11 Rain Cap Available Seperately) 5” INSIDE DIAMETER 48” OVERALL LENGTH

A-S412X24 Straight Pipe 9.00 Lbs. Includes CL412 Inlet Clamp(Uses RC9 Rain Cap Available Seperately) 4 1/2” INSIDE DIAMETER 24” OVERALL LENGTH For Models: SEVERAL

A-CL118 1-1/8” Muffler Clamp 0.19 Lbs.

A-CL114 1-1/4” Muffler Clamp 0.24 Lbs.

A-CL112 1-1/2” Muffler Clamp 1.00 Lbs.

A-CL158 1-5/8” Muffler Clamp 1.00 Lbs.

A-CL134 1-3/4” Muffler Clamp 1.00 Lbs.

A-CL178 1-7/8” Muffler Clamp 1.00 Lbs.

A-CL200 2” Muffler Clamp 1.00 Lbs.

A-CL218 2-1/8” Muffler Clamp 0.28 Lbs.

A-CL214 2-1/4” Muffler Clamp 1.00 Lbs.

A-CL212 2-1/2” Muffler Clamp 1.00 Lbs.

A-CL258 2-5/8” Muffler Clamp 1.00 Lbs.

A-CL234 2-3/4” Muffler Clamp 1.00 Lbs.

A-CL300 3” Muffler Clamp 1.00 Lbs.

A-CL314 3-1/4” Muffler Clamp 1.00 Lbs.

A-CL312 3-1/2” Muffler Clamp 1.00 Lbs.

A-CL400 4” Muffler Clamp 1.00 Lbs.

A-CL412 4-1/2” Muffler Clamp 1.00 Lbs.

A-CL500 5” Muffler Clamp 2.00 Lbs.

For Models:

Miscellaneous

MU

FFLE

RS

/ E

XH

AU

ST P

IPE

S

42

Parts are not original equipment parts and are not sponsored, affi liated or otherw

ise connected with any m

ajor brand.

A-RC12 1” to 1-3/16” Weather Cap 0.52 Lbs.

A-RC13 1-1/4” to 1-7/16” Weather Cap 0.56 Lbs.

A-RC0 1-1/2” Weather Cap 1.00 Lbs.

A-RC1 1-3/4” Weather Cap 1.00 Lbs.

A-RC2 2” Weather Cap 1.00 Lbs.

A-RC5 2-1/4” Weather Cap 1.00 Lbs.

A-RC3 2-1/2” Weather Cap 1.00 Lbs.

A-RC7 2-3/4” Weather Cap 1.00 Lbs.

A-RC4 3” Weather Cap 1.00 Lbs.

A-RC14 3-1/4” to 3-7/16” Weather Cap 1.42 Lbs.

A-RC8 3-1/2” Weather Cap 1.58 Lbs.

A-RC15 3-3/4” to 3-15/16” Weather Cap 1.58 Lbs.

A-RC9 4” 1.75 Lbs.

A-RC16 4-1/4” to 4-7/16” Weather Cap 1.54 Lbs.

A-RC10 4-1/2” Weather Cap 2.00 Lbs.

A-RC17 4-3/4” to 4-15/16” Weather Cap 1.57 Lbs.

A-RC11 5” Weather Cap 2.00 Lbs.

For Models: Fits Several Model Applications, Check Dimensions Before Ordering

Miscellaneous