Upload
lamdang
View
216
Download
0
Embed Size (px)
Citation preview
"Making�the�difference"�with�our�esteemed�customers
LUMINAIRES BUSINESS UNIT,
601, Rustomjee Aspiree, Bhanu Shankar Yagnik Marg,
Off Eastern Express Highway, Sion (E), Mumbai 400 022. Tel: 022 2406 4400
E-mail : [email protected] | www.bajajelectricals.com |
LED ED�E �treet�i��t
The lighting industry has embraced the innovative technology and superior performance of the Bajaj Street
Lights. Capitalizing on this very fact and the widespread success, we present to you the "LED Edge Street
Lighting Range". Designed by a state-of-the-art lighting system to harness the power and efficiency of LED
technology, LED streetlights deliver an environment friendly solution while bringing uncompromising
brilliance in efficiency, performance, longevity & style. With a life span 5 times longer than that of an
average lamp, LED streetlight is a special range of application oriented LED products based on Optics, Power
and Thermal Management.
ENVIRONMENT FRIENDLY
Crafted with care, committed to the cause of a cleaner, greener earth, LED streetlight embodies our concern
for nature. 100% environment friendly, they have zero harmful emission and a guarantee of 80% lumen
maintenance even at the end of 50,000 hours of operation. This LED range offers a number of environmental
advantages over other types of lighting. The longer component life of the fixtures means less waste. They
contain no mercury.
LOWER GREEN HOUSE GAS EMISSIONS
LED streetlights reduce the amount of energy used and ultimately help to reduce the carbon footprint of
your municipality. The DOE estimates rapid adoption of LED over the next 20 years can eliminate 258 million
metric tons of carbon emissions.
REDUCE, REUSE, RECYCLE
LED products are made using a total of 20-25% (by weight) post-consumer recycled materials. Seventy
percent (by weight) of LED components are aluminium castings and extrusions that are readily recyclable.
Corrugated packaging is 100% recyclable.
LESSER ENERGY CONSUMPTION
Energy savings from LED streetlights, for typical street lighting applications, is generally 40-60% compared
to traditional high-intensity discharge (HID) products. Lighting controls using wireless and power line carrier
technology can be added to further enhance overall savings.
PRECISION OPTIC TECHNOLOGY
Optic is a direct-refractor that minimizes light losses and provides superior target performance. Light from
LED is directed where it's intended, without any waste. The effective combination of precise optics and driver
efficiency allows LED Edge streetlights to deliver significantly improved overall lighting performance using
less energy compared to traditional system. To ensure precise optics we use high efficiency lenses.
LENS
• Lenses are made of high quality optical grade PMMA material having very high average transmittance.
• They provide exceptional colour mixing result with the highest efficiency, this is due to the careful
engineering and precision manufacturing process.
• These lenses have oval beam angle resulting in excellent light distribution as required for roadway
application.
EFFICIENT THERMAL MANAGEMENT
Proper thermal management is key to longevity. Each light bar is mounted to heat sinks to ensure that LEDs
are operating at the ideal temperature.
LED EDGE STEETLIGHT
CUB�Roadway�Luminaires
CUB - a sleek, aesthetically designed luminaire in LED 15/20/25/30W.
Attractively styled high pressure die cast housing acting as a heat sink.
Housing is epoxy powder coated in dark graphite grey colour.
0 0Efficient LEDs having colour temperature of 5700 K (+/-300 K) for day light
appearance.
Total power consumption is 15/20/25/30W (including driver).
LEDs with lens optics and vandal proof prismatic poly carbonate cover ensure
efficient optics and uniform distribution suitable for streetlight application.
Lm80 certified LED chip with consistent light output, stable colour appearance
and high colour rendering index.
Luminaires conforms to LM 79.
Constant current LED driver ensures >85% efficiency level and designed to
withstand standard high voltage surge protection and provided with open and
short circuit protections.
THD <10%, Power Factor >0.95
Ingress Protection : IP65
Suitable for side mounting bracket of 38mm diameter.
Weight : 2.2 Kg.
FEATURES
Security Lighting | Residential Complexes | Secondary Roads
APPLICATIONS
EDGE�Low�Wattage
01
All dimensions in mm
TECHNICAL DATA
Catalogue
Reference
Input Voltage
(V) AC
Delivers
Lumens
System Wattage
(W) AC
BCLST 15W 140-280 > 1200 15
BCLST 20W 140-280 > 1600 20
BCLST 25W 140-280 > 2000 25
BCLST 30W 140-280 > 2400 30
02 03
Epoxy powder coated pressure die-cast aluminium housing with weatherproof
gasket for LEDs and control gear compartments.
Pressure die-cast aluminium frame with heat resistant toughened clear glass
fixed with SS screws.
0 0LED specification : Make - CREE LED / Equivalent, colour temp. - 5700 K ± 300 K.
High surge protection - 5kV surge protection (optional 10kV surge protection
available).
Constant current LED driver ensures >85% efficiency level and designed to
withstand standard high voltage surge protection and provided with open and
short circuit protections.
THD <10% and Power Factor >0.95.
Side entry mounting for 50 to 60 mm OD pipe bracket.
Top maintenance - Access to driver is from the top.
Ingress protection : IP66
FEATURES
Primary Roads | Civic Centers | Traffic Round-abouts | Arterial Roads
APPLICATIONS
EDGE�High�Wattage
TECHNICAL DATA
Catalogue
Reference
Input Voltage
(V) AC
Delivers
Lumens
System Wattage
(W) AC
BRTFG 100W LED 140-280 > 8500 100
BRTFG 120W LED 140-280 > 10200 120
BRTFG 135W LED 140-280 > 11500 135
BRTFG 150W LED 140-280 > 12750 150
Epoxy powder coated pressure die-cast aluminium housing with weatherproof
gasket for LEDs and control gear compartments.
Pressure die-cast aluminium frame with heat resistant toughened clear glass
fixed with SS screws.
0 0LED specification : Make - CREE LED / Equivalent, colour temp. - 5700 K ± 300 K.
High surge protection - 5kV surge protection (optional 10kV surge protection
available).
Constant current LED driver ensures >85% efficiency level and designed to
withstand standard high voltage surge protection and provided with open and
short circuit protections.
THD <10% and Power Factor >0.95.
Side entry mounting :
50 to 60 mm OD pipe bracket for 72/90W.
40 to 50 mm OD pipe bracket for 45/60W
Top maintenance - Access to driver is from the top.
Ingress protection : IP66
FEATURES
Roads | Residential Complexes | Traffic Round-abouts | Park & Gardens
APPLICATIONS
EDGE�Mid�Wattage
TECHNICAL DATA
Catalogue
Reference
Input Voltage
(V) AC
Delivers
Lumens
System Wattage
(W) AC
BRTFG 45W LED I 140-280 > 3800 45
BRTFG 60W LED I 140-280 > 4800 60
BRTFG 72W LED I 140-280 > 5800 72
BRTFG 90W LED I 140-280 > 7700 90
All dimensions in mmAll dimensions in mm
545
103
256
BRTFG 45/60W LED I BRTFG 72/90W LED I
180
360Pipe Entry
88
To control LED street lighting depending on traffic flow, communicate data between each street light using Radiocraft RF Transceiver
Module. The computer based control station from which the entire area can be monitored & controlled using GPRS/GSM wireless
communication.
To control light on/off, individual dimming, group dimming, and some environment condition by just sending a simple command from
the PC/Laptop/ Server or your tablet.
The control system GUI can designed as per customer requirement.
Street Light Management System using RF/GPRS/GSM
05
INTEROPERABLE NETWORK
FEATURES
WIRELESS TECHNOLOGY: Employs latest RF/GPRS/GSM
technology to program and control remote streetlights.
MONITOR: Equipped with communication & energy monitoring
modules to update the Master Control Station (MCS)
CONTROL: Can be switched on or off based on selected group of
light poles.
DIMMING OF LIGHTS: Can be programmed to dim the street
lights at late night to reduce energy consumption.
BURNING HOURS: Can be computed with good certainty and
maintenance/ replacement can be planned accordingly.
FLEXIBLE FOR EXPANSION: The system can easily be expanded
to any new area or to remote distance.
04
Epoxy powder coated pressure die-cast aluminium housing with weatherproof
gasket for LEDs and control gear compartments.
Pressure die-cast aluminium frame with heat resistant toughened clear glass
fixed with SS screws.
All the LED used are provided with Lenses to get optimum optical performance.
LED specification: Make of LED - CREE; LED Efficacy >120 lm/w, colour temp. 0 05700 K ± 300 K.
The driver used is specially designed to have protection against surge voltage,
high voltage cut-off, short circuit.
THD <10% and Power Factor >0.95.
Side entry mounting for 50-60 mm OD pipe bracket.
Surge protection : 5kV (10kV Optional)
Ingress protection : IP66
System Wattage
(W) AC
BELST 210W 140-280 > 19500 210
FEATURES
Primary Roads | Civic Centers | Traffic Round-abouts | Arterial Roads
APPLICATIONS
EDGE�High�Wattage
TECHNICAL DATA
Catalogue
Reference
Input Voltage
(V) AC
Delivers
Lumens
All dimensions in mm
783
348
69
INTELLI