44
by by LED our way

LED brochure UK

Embed Size (px)

DESCRIPTION

Our lighting philosophy can be abridged to just three letters. Standing for Function, Comfort and Ambience, FCA® encompasses a multi tude of terms all of which are crucial in the manufacture of an original Louis Poulsen light fixture. LED_Our way

Citation preview

Page 1: LED brochure UK

byby

LEDour way

Page 2: LED brochure UK

Our lighting philosophy can be abridged to just three letters.

Standing for Function, Comfort and Ambience, FCA® encom-

passes a multi-tude of terms all of which are crucial in the

manufacture of an original Louis Poulsen light fi xture.

ambiance

Page 3: LED brochure UK

comfort

function

®fca

Page 4: LED brochure UK

4 peo

Page 5: LED brochure UK

5pleLight makes life, and life is lived in light. At Louis Poulsen, we never design in order to win awards,

we do not look for inspiration in trends, but in our perception of lighting and aesthetics defi ned in our

lighting philosophy. Our lighting starts and ends with people. Decades of research and development

have been invested in creating the highest quality lighting on a human and highly personable level.

Page 6: LED brochure UK

6

lifeLife would not exist without light. Yet at Louis Poulsen

we see light not only as a necessity, but also as an op-

portunity. As daylight fades, our lighting is designed to

take over, adding new dimensions and creating vibrant

spaces, both indoors and out. This ongoing development

of artifi cial lighting for the benefi t of human well-being

remains our greatest challenge.

Page 7: LED brochure UK

7

Page 8: LED brochure UK

460mm

Ø773

457

913

1370

1826

2

lightingtechnologyThe most important feature of any Louis Poulsen fi xture. Each

detail infl uences the construction and the light distribution.

Each detail has a function. The product design humanises the

light source and creates the feeling of comfort and ambiance.

Louis Poulsen fi xture design is for the eyes only – in more

than one way.

Page 9: LED brochure UK

INJECTION MOULDED U.V. AND WEATHER RESISTANT (ASA) TOP SHADE AND EDGEBAND FINISHED IN WHITE FOR NATURALPAINTED ALUMINUM VERSIONS OR BLACK FOR BLACK VERSIONS

LED 58W, 4100K

mm

Page 10: LED brochure UK

10

intell

Page 11: LED brochure UK

11

Intelligent lighting is often used to describe electronically-controlled lighting.

We believe that all our lighting is intelligent. Based on an unique approach to

light, which is maintained throughout the manufacturing process, our light-

ing philosophy requires that all aspects of a design are examined down to

the smallest detail, giving the term intelligent lighting an extra dimension.

Simplifi ed in the rule – no detail without a purpose.

igent

Page 12: LED brochure UK

REFLECTOR FOR ILLUMINATION CLOSE

TO THE POLE

TOP-REFLECTOR FOR VERTICAL LIGHT

UPWARD DIRECTED LED.

25% OF THE EMITTED LIGHT

LIGHT ENGINE WITH MULTIPLE FUNCTIONS:

- OUTSIDE COOLING THROUGH NATURAL

AIR CONVECTION

- INSIDE SUPPORT FOR LED´S

- ANTI-GLARE RING

DOWNWARD DIRECTED LED.

75% OF THE EMITTED LIGHT

STEM CONTAINING WIRING

REFLECTOR FOR WIDE

LIGHT DISTRIBUTION

Page 13: LED brochure UK

Updating a product is always done with the great-

est respect for the originally designed lighting con-

cept. At the same time all details still have to have

a function. To be true to our product philosophy will

always be the challenge, but at the same time the

warranty for a solution focussing on people. This is

why Louis Poulsen products maintain their power of

attraction. No compromises – only the best solution.

r e s p e c t

Page 14: LED brochure UK

14

The basics of Louis Poulsen are to create solutions with the

best possible comfort for human beings. The humanization

of light sources includes many aspects, but the most im-

portant is to avoid obtrusive glare so it becomes easier to

see and to be seen, and hence feeling secure and comfort-

able in a pleasant atmosphere. Therefore, the quality of

light is not just measureable fi gures but more the human

experience of the light.

25%

Page 15: LED brochure UK

15

75%humanization

Page 16: LED brochure UK

content

Page 17: LED brochure UK

17

ORBITER MINI LED 18

LP NEST LED 20

RUBBIE LED 22

AJ 50 WALL LED 24

KIPP POST LED 26

KIPP BOLLARD LED 28

KIPP WALL LED 30

NYHAVN PARK LED 32

WATERFRONT LED 34

PAGODA LED 36

F+P 550 LED 38

F+P 1500 LED 40

Page 18: LED brochure UK

18

the fi xture that changed the perception (of outdoor lighting)

The Park at Lakeshore East, Chicago, IL, USA

Architect: Site Design Group, Ltd./The Office of James Burnett

Lighting Design: Site Design Group, Ltd., A. Epstein & Sons Int’l., Inc.

Photo: Ron Gordon / Site Design Group, Ltd.

Page 19: LED brochure UK

19

Ø 880

066

factsFinish: White, grey or graphite grey, powder coated.Light source: 53W LED, 4100K.Material: Top shade: Die formed fi ber glass. Enclosure: Injection moulded clear polycarbonate. Heat sink: Die cast aluminium. Base: Die cast aluminium. Struts: Stainless steel.Weight: 12 kg.

Orbiter Mini has been copied all over the world and inspired myriad outdoor

lighting solutions, but why settle for a copy when you can get the original?

The lighting concept of Orbiter Mini has always been unique, and the chal-

lenge for the LED version was to maintain this extraordinary uniqueness -

especially in terms of glare-free lighting and the sense of feeling secure. The

process has been long and challenging, as described earlier. The concept has

been turned upside down, so it is now the LED that points downward that

delivers 75% of the light spread on the pavement, the rest comes from the

upper LED by the refl ection of the top shield, this takes care of the area closer

to the post. The antiglare ring now functions as the LED heat sink, and the

stems cover the power supply cord. The famous Orbiter Mini idiom has been

kept, so replacements in existing projects is possible without disturbing the

overall perception of the lighting atmosphere.

Design: Jens Møller-Jensen

orbiter mini led

Page 20: LED brochure UK

20

330

750factsFinish: Housing: Natural painted aluminium or graphite grey, powder coated.Light source: 58W LED, 4100K.Material: Housing: Die cast aluminium. Refl ector: Specular spun aluminiumTop shade: White painted aluminium.Weight: Max. 9 kg.

Inspired by na-

ture. Organic

design combined

with both functional and dec-

orative lighting. LP Nest brings nature

into the urban environment. The simplicity of

the design fi ts carefully into a variety of locations – and

brings new life to the surroundings and its people. LP Nest

is the newest post top from Louis Poulsen, also new in the way

of thinking light. A nest carries the top plate which works as a

refl ector and the mechanical design ensures full glare control in

addition to a good vertical light distribution. Again, like other

Louis Poulsen post top luminaires, LP Nest keeps its graphical

idiom whether lit or unlit. The dimensions secure a quiet ap-

pearance no matter where the fi xture is placed, and the light

distribution makes it unique for any application.

Page 21: LED brochure UK

21

Louis Poulsen Factory,

Vejen, Denmark.

Photo: Kaslov Studio

lp nest ledinspired by nature

Page 22: LED brochure UK

22

rubbie bollard led

Danish Pavilion, EXPO Fair Hannover, Germany. Photo: Planet

Page 23: LED brochure UK

23

The naval idiom comes from the bollards along the harbour quays. A pure

functional object. The design expresses the function. No details without a

purpose. This is Rubbie. Rubbie is, as the name indicates, made of rub-

ber. It is both hard and soft at the same time, harder than your normal

experience of rubber, soft compared to aluminium. The material has been

tested for more than 5 years, and has shown a fantastic durability. Over

the years, the material will become ”designed” by nature similar to the

other bollard by Peter Bysted, the Bysted bollard made of corten steel.

Rubbie is available with colour temperatures of 3000K (19W of sys-

tem power) and 4000K (18W of system power). The light distribution

is glare free, has an optimised vertical distribution which creates a

friendly and secure experience for human beings. The height and

the material also make the bollard useable as a relaxing object in

the urban area.

factsFinish: Black.Light source: 19W LED, 3000K or 18W LED, 4000K.Material: Body: UV-stabilised EPDM rubber. Enclosure: Clear polycarbonate. Top shade: UV-stabilised EPDM rubber.Weight: 17,5 kg.

Design: Peter Bysted

716

294

400

charming light

Page 24: LED brochure UK

24

aj 50 wall led

Priv

ate

resi

denc

e, C

open

hage

n, D

enm

ark.

Pho

to: J

espe

r R

ay

Page 25: LED brochure UK

25

AJ Wall is an indoor and outdoor wall fi xture designed on the basis of the

world-known AJ family. Simple geometrics in austere design where

shapes directly refl ect the light emission. The location, colour ren-

dition (RA>80) and colour temperature (3000°K) of the LED

help maintain the well-known and valued lighting com-

fort. AJ 50 Wall is made of die cast aluminium with

a textured surface that offers better resistance

to the challenges of the weather. Available

in black, aluminium colour and white.

State-of-the-art LED technology

means that the driver can be

dispensed with. AJ 50

Wall emits glare-free,

downward lighting.

The white inner shade

refl ects light downwards and the precise angle of the

shade provides decorative backlight that illuminates wall and

material in a comfortable and exclusive manner.

a design icon featuring a new lighting technology

Design: Arne Jacobsen

factsFinish: Black, graphite grey or white, structured, powder coated.Light source: Mains voltage 8W LED, 3000K.Material: Die cast aluminium.Weight: Max. 2 kg.

349

113

248

52

350

Page 26: LED brochure UK

26

954

Ø 773

Last year Kipp Wall and bollard celebrated their 10th anniversary. Since the beginning, the

Kipp family has proven its uniqueness. Effi ciency is part of the design, and the LED-versions

are no exceptions. The matte opal diffuser ensures a non glaring light distribution. The de-

sign optimises the use of the light source whether it is a conventional light source or LEDs.

Focusing on each detail the Alfred Homann way

ensures both effi ciency and product quality.

The comfort is unique and the adaptability to

all kinds of architecture and surroundings is a trade

mark of Alfred Homann. The light distribution is symmetri-

cal downwards. The relationship between the curved design of

the top shade and the calculated distance to the LED ensures a

uniform and wide distribution of light.

kipp post led

factsFinish: Natural painted aluminium or black, powder coated.Light source: 58W LED, 4100K.Material: Diffuser: Injection molded white opal acrylic. Top shade: Injection moulded ASA. Enclosure: Injection moulded clear polycarbonate. Frame: Die cast aluminium.Weight: Max. 11 kg.

Design: Alfred Homann

26

Page 27: LED brochure UK

27

sustainable product and lighting quality

California State University

San Bernardino College of Education,

San Bernardino, CA, USA

Architect: LPA Inc.

Photo: Costea Photography

Page 28: LED brochure UK

28

design and effi ciency

Eastside Cannery, Las Vegas, NV, USA

Architect: Klai Juba Architects

Photo: Saari & Forrai Photography

Page 29: LED brochure UK

2929

Ø 115

Ø 440

600

210

1105

kipp bollard ledAn extremely good example of one of the important issues

in the Louis Poulsen lighting philosophy – to have the same

idiom both lit an unlit. As simple as it gets. But with a com-

fort for humans combined with rarely seen effi ciency. As with

the other member of the Kipp family, the sense of simplicity

is the key to success. A fantastic adaptability to any surround-

ings whether architectural or nature. The light distribution

is symmetrical downwards. The relationship between the

curved design of the top shade and the calculated distance

to the LED ensures a uniform and wide distribution of light.

Furthermore, the freestanding position ensures superb 360°

light distribution around the fi xture, so both the paths and

the space behind are beautifully illuminated.

Design: Alfred Homann

factsFinish: Natural painted aluminium or black, powder coated.Light source: 37W LED, 4000K.Material: Diffuser: Injection moulded white opal acrylic. Top shade: Die cast aluminium. Enclosure: Injection moulded clear polycarbonate. Frame: Die cast aluminium. Base plate: Die cast aluminium. Post: Extruded aluminium.Weight: Max. 19 kg. including footplate and pole.

Page 30: LED brochure UK

3030

6 05

0 1 2

Ø 440

0 4 5 0 5 1 Ø

kipp wall ledkipp wall ledLast year Kipp Wall and bollard celebrated their 10th anniversary. Since the be-

ginning, the Kipp family has proven its uniqueness. Effi ciency is part of the de-

sign, and the LED-versions are no exceptions. The matte opal diffuser ensures a

non-glaring light distribution. The design optimises the use of the light source

whether it is a conventional light source or LEDs. Focusing on each detail the

Alfred Homann way ensures both effi ciency and

product quality. The comfort is unique and

the adaptability to all kinds of architecture and

surroundings is a trade mark of Alfred Homann. The

light distribution is symmetrical downwards. The rela-

tionship between the curved design of the top shade and

the calculated distance to the LED ensures a uniform and wide

distribution of light.

Design: Alfred Homann

factsFinish: Natural painted aluminium or black, powder coated.Light source: 37W LED, 4000K.Material: Diffuser: Injection moulded white opal acrylic. Top shade: Die cast aluminium. Enclosure: Injection moulded clear polycarbonate. Frame: Die cast aluminium. Mounting plate: Die cast alu-minium. Arm: Extruded aluminium.Weight: Max. 8 kg.

Page 31: LED brochure UK

when simplicity meets elegance

Rancho Mirage Medical Center,

Rancho Mirage, CA, USA

Architect: Burghard Design Group

Photo: Domin Photography

31

Page 32: LED brochure UK

32

Chan

nel I

slan

ds H

arbo

r, O

xnar

d, C

A, U

SA. A

rchi

tect

: Bry

ant

Palm

er S

oto,

Inc.

, Tor

ranc

e, C

A. P

hoto

: Dom

in P

hoto

grap

hy

becomes a natural part of the project

nyhavn park ledcustom design product

Page 33: LED brochure UK

33

Ø 760

065

The Nyhavn family was established as a custom-design project. Tasked with making a

new wall fi xture for the renovation of the old yards behind Nyhavn, Alfred Homann and

a colleague designed the Nyhavn Wall ”to build a bridge between old architecture and

modern lighting”. The LED version maintains the characteristic light of the Nyhavn family.

All the fi xtures in the family cast direct downlight on the pavement, and the light emitted

fades out evenly around the fi xture. The characteristic rings at the top of the fi xture serve

two purposes. One is to retain the fi xture’s idiom when it is active; achieved because the

gentle light emitted from the shades make the fi xture appear similar in both daylight and

darkness. The other aim is to allow the light emitted from the top to serve as a guiding

light when the post is placed along streets and paths.

Design: Alfred Homann

factsFinish: White or natural painted aluminium, powder coated.Light source: 63W LED, 3000K or 4000K.Material: Shade: Spun aluminium. Enclosure: Injec-tion moulded opal polycarbonate. Rings: Die cast aluminium. Top: Die cast aluminium. Weight: Max. 13 kg.

Page 34: LED brochure UK

34

Ø 260

Ø 219

072

568006

Waterfront meets all architectural challenges. It broadens the meaning of

adaptability. Fitting into the surroundings with an aesthetically

silent appearance makes Waterfront a lighting statement.

The robust design leaves no doubt about how the light

distribution appears, and the simple idiom has a

unique adaptability to all kinds of architecture,

new as well as old. Waterfront is character-

ised by its diffused light distribution. The light

emitted is glare-free and distributed down-

wards to create a symmetrical pattern on the

ground. The rugged construction makes it

suitable for use in public areas.

Design: Dan Borgen Hasløv

a champion of durable design and lighting

factsFinish: Natural painted aluminium or graphite grey, powder coated.Light source: 37W LED, 4000K. Material: Enclosure: Injection moulded clear poly-carbonate. Housing: Die cast aluminium. Top: Die cast aluminium. Post: Extruded aluminium. Base plate: Die cast aluminium. Weight: Max. 16 kg.

Page 35: LED brochure UK

35

waterfront led

Aventura Community Recreation Center, Aventura, FL, USA. Specifi er: City of Aventura. Photo: Terry Renna

Page 36: LED brochure UK

36

a bollard in disguise

Louis Poulsen Factory, Vejen, Denmark. Photo: Kaslov Studio

Page 37: LED brochure UK

3737

pagoda led

Shortly described as comfort meeting function, and function that

melts into the ambiance. Pagoda was born as an add-on to inground

fi xtures, but the new LED version is designed as an onground fi xture.

Four bolts and mains supply is all you need. The multi-functionality

of the Pagoda, both a street-chair and a “bollard”, makes this prod-

uct quite unique. The light distribution is a low area lighting that

underlines and creates a very special atmosphere at squares, plazas,

streets, etc. The simplicity of the design and the casting in one process

makes the Pagoda extremely vandal resistant. The form protects the

light source from direct vandalism.

Design: design-people

factsFinish: Graphite grey, powder coated.Light source: Mains voltage 4W LED, 3000K.Materials: Frame: Die cast aluminium. Weight: Max. 20 kg.

430

200 200

380400

Page 38: LED brochure UK

38

Ø 550

Ø 246

Max

. 400

0

51

35

factsFinish: Matte opal glass.Light source: 40W LED, 3000K.Material: Shade: Die cast aluminium. Refl ector: Spun aluminium. Diffuser: Matte white opal glass.Weight: Max. 5,5 kg.

Simplicity is the formula for this circular fi xture. The light source determines

its shape; its function and the materials. The shape signals the illumination,

and the illumination reinforces the shape. But don’t get fooled by the simplic-

ity. Behind the glare-free light lies a unique way of distributing the light from

the extremely glary LEDs. Foster + Partners launched a vision for the new

light source in the Louis Poulsen lighting universe. The colour temperature is

3000°K and the light source consists of 30 LEDs. Because of the high demands

Louis Poulsen places on the quality of light, it has been of utter importance

to use only the best controlled LED’s regarding colour temperature. The ceiling

rose hides a unique system for adjusting the balance of the fi xture quick and

easy. The glass diffuser gives the product a light and exclusive appearance

which gives the room a surprising and extraordinary atmosphere.

Page 39: LED brochure UK

39

a 360° light experienceArchitectural offi ce on a house boat, Copenhagen, Denmark. Photo: Anders Sune Berg

f+P 550 led

Page 40: LED brochure UK

40

free-fl oating light

Margot and Bill Winspear Opera House in Dallas, TX, USA

Architects: Foster + Partners

Lighting Design: Claude Engle

Photo: Nigel Young_Foster + Partners

Page 41: LED brochure UK

41

custom design product

37.2

56”

945

1500

f+p 1500 ledDesign: Foster + Partners

Custom designed version of the f+p 550 multiplied by 2.8. The

f+p 1500 is specially designed for the Winspear Opera House

in Dallas, Texas. The material differs naturally from

the smaller version, especially the glass

which is changed into polycarbonate.

The luminaires are placed in the pub-

lic area and the appearance is silent

and beautiful and, though big, they fi t

harmoniously into the surroundings. The

light becomes a part of the room.

factsFinish: Clear acrylic with frosted fi nish on top.Light source: 75W LED, 2700K dimming 1-10V.Material: Shade: Die cast aluminium. Refl ector: Spun aluminium. Diffuser: Clear acrylic.Weight: Max. 51 kg.

Page 42: LED brochure UK

conside

Reservations are made to print and changes occaisioned by technical development or offi cial regulations

Page 43: LED brochure UK

rationsBefore making a decision on which lighting fi xture to use, consider these

parameters.

Functional aspects such as fl ux levels, effi ciency demands, lumen per watt,

lumen depreciation, distance between poles/fi xtures, mounting heights,

cutoff vs. non-cutoff, durability and safety.

Comfort details which include light pollution, light source CRI, degree of glare,

ease of maintenance, color rendering, security and well being.

Ambience effects such as uniformity, sustainability, light temperature

(warm, neutral or cold), position of the light source, adaptability and aesthetics.

During the development of each of our products, we carefully consider these pa-

rameters which are the three components of the Louis Poulsen philosophy. We

stand behind each fi xture, proud in knowing that we have designed the best fi x-

ture possible. When deciding on which product to use for your lighting project,

consider your priorities carefully and always keep in mind...Light is for people!

Page 44: LED brochure UK

w w w . l o u i s p o u l s e n . c o m