4
 Arkà Technologies B-33, Gopal Co-Op Society. Ganeshnagar. Dhayari- Pune – 4 11041E-Mail – [email protected] Mobile No - +91 9823081757 www.arkatechnologies.in Energy Efficient Lighting Solution based on LED: Energy efficient lighting is need of the day and help achieve electrical saving consumed for lighting purpose. Technologies like LED lighting in this domain and will help to address various lighting requirements giving lesser electricity consumption  Efficiency: LEDs produce more light per watt than incandescent bulbs.  Color: LEDs can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and can lowe r initial costs.  Size: LEDs can be very small (smaller than 2 mm) and are easily populated onto printed circuit boards.  On/Off time: LEDs light up very quickly. A typical red indicator L ED will achieve full brightness in microseconds. LEDs used in communications devices can have even faster response times.  Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cyc led frequently, or that require a long time before restarting.  Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the forward current.  Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to se nsitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.  Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulb  Lifetime: LEDs can have a relatively long useful life. One r eport estimates 35,000 to 50, 000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.  Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fr agile. Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.  Toxicity: LEDs do not contain mercury, unlike fluorescent lamps We offer complete lighting solutions based on LED catering to applications like Indoor lighting, Office lighting, Street lights and even signage.

Brochure- LED Luminaries

Embed Size (px)

Citation preview

Page 1: Brochure- LED Luminaries

8/3/2019 Brochure- LED Luminaries

http://slidepdf.com/reader/full/brochure-led-luminaries 1/4

 

Arkà Technologies

B-33, Gopal Co-Op Society. Ganeshnagar. Dhayari- Pune – 411041E-Mail – [email protected] Mobile No -

+91 9823081757

www.arkatechnologies.in

Energy Efficient Lighting Solution based on LED:

Energy efficient lighting is need of the day and help achieve electrical saving consumed for lighting

purpose. Technologies like LED lighting in this domain and will help to address various lighting

requirements giving lesser electricity consumption

•  Efficiency: LEDs produce more light per watt than incandescent bulbs.

•  Color: LEDs can emit light of an intended color without the use of color filters that traditional

lighting methods require. This is more efficient and can lower initial costs.

•  Size: LEDs can be very small (smaller than 2 mm) and are easily populated onto printed circuit

boards.

•  On/Off time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness inmicroseconds. LEDs used in communications devices can have even faster response times.

•  Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike

fluorescent lamps that burn out more quickly when cycled frequently, or that require a long

time before restarting.

•  Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the

forward current.

•  Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that

can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through

the base of the LED.

•  Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of 

incandescent bulb•  Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000

hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically

are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and

incandescent light bulbs at 1,000–2,000 hours.

•  Shock resistance: LEDs, being solid state components, are difficult to damage with external

shock, unlike fluorescent and incandescent bulbs which are fragile.

•  Focus: The solid package of the LED can be designed to focus its light. Incandescent and

fluorescent sources often require an external reflector to collect light and direct it in a usable

manner.

•  Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

We offer complete lighting solutions based on LED catering to applications like Indoor lighting, Office

lighting, Street lights and even signage.

Page 2: Brochure- LED Luminaries

8/3/2019 Brochure- LED Luminaries

http://slidepdf.com/reader/full/brochure-led-luminaries 2/4

 

Arkà Technologies

B-33, Gopal Co-Op Society. Ganeshnagar. Dhayari- Pune – 411041E-Mail – [email protected] Mobile No -

+91 9823081757

www.arkatechnologies.in

LED Lanterns

Technical Specifications

•  3 W

•  100 No. dome LEDs

•  Charging through Solar Panels

•  6 -8 Hours back up

•  Non corrosive MS body with clear acrylic

front plate

•  2 W Single LED•  Solar and 230V AC charging

•  360° spread of light

•  Acrylic body with user friendly handle

•  Optional dimmer mode

Solar Home Lighting system

•  Battery :12v-7AHSMF •  Body :Acrylic

•  Lamp Configuration : 3 Luminaries of 3 Watt each 

•  Light output : 3x300 lumens 

•  Duration : 4 hours / day 

•  Solar Panel- 10W

•  Applications : houses, shops, asemergency lamps during power cuts, 

Page 3: Brochure- LED Luminaries

8/3/2019 Brochure- LED Luminaries

http://slidepdf.com/reader/full/brochure-led-luminaries 3/4

 

Arkà Technologies

B-33, Gopal Co-Op Society. Ganeshnagar. Dhayari- Pune – 411041E-Mail – [email protected] Mobile No -

+91 9823081757

www.arkatechnologies.in

Office and Industrial Fixtures

Down Lighter & Ceiling Lights.

•  8 - 10 W ( equivalent to 2x18 CFL)

•  90-270V AC

•  Industry standard fixture

•  Retrofitting assembly

•  750 -900 lm

•  24 -30-36 - 48 W ( equivalent to 2x36 &

3 x 36 CFL)

•  90-270V AC

•  Industry standard fixture- 2ft x 2 ft

•  Retrofitting assembly

•  100 lm/ W

•  Colour- CW /WW

•  10 W ( equivalent to 2x18 CFL)

•  90-270V AC

•  Industry standard fixture

•  Retrofitting assembly

•  100 lm/ W

•  Colour- CW /WW

Page 4: Brochure- LED Luminaries

8/3/2019 Brochure- LED Luminaries

http://slidepdf.com/reader/full/brochure-led-luminaries 4/4

 

Arkà Technologies

B-33, Gopal Co-Op Society. Ganeshnagar. Dhayari- Pune – 411041E-Mail – [email protected] Mobile No -

+91 9823081757

www.arkatechnologies.in

Street Light

•  18 W•  90-260 V AC

•  IP 65 fixture

•  Average Luminance – 7M ht ~ 18 Lux

•  1800 lm

•  160 ° Viewing angle

Flood Light

•  24 W

•  90 – 260 V AC

•  IP 65

•  1900 lm

•  Viewing angle 40°

•  Colour- WW/CW

Under water & Fountain light-

•  9 W

•  12 V DC

•  IP 68

•  Colour-WW/CW/Blue/ RBG