Lauren Engineering Brochure

Core Beliefs

ABOUT US

Lauren Vision Lauren’s vision is to be a light to the world and the contractor of choice through constructive and caring relationships with customers, suppliers and peers.

Lauren Mission Statement Lauren helps our customers succeed by providing innovative solutions and by designing and building the highest quality facilities with timeliness, integrity and skill.

Core Values • We believe that our primary purpose is to love and honor God and to serve others. • We strive to be the very best at whatever we choose to do. • We strive to develop extreme loyalty through exceptional performance. • We challenge and help every worker to reach their full potential. • We realize people are more important than activities or things. • We will be good stewards of our time, talents and treasures. • We encourage innovation, reward responsible risk taking and forgive mistakes.

In the same way, let your light shine before others, that they may see your good deeds

and glorify your Father in heaven.Matthew 5:16

901 South First Street • Abilene, TX 79602 • 325-670-9660 • laurenec.com

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Company Profile

Lauren Engineers & Constructors began over 25 years ago as a small specialty construction company and has grown into a fully integrated provider of professional engineering, procurement and construction services. Due to our success, we are able to focus on recruiting and developing highlyregardedprofessionals,refininginternalprocesses and adding capabilities. Continually developing our full range of in-house services allows Lauren to offer innovative and cost-effective solutions to our clients in our core markets such as:

• Alternative Energy

• Power Generation

• Chemical and Polymers

• Oil & Gas

• Industrial Manufacturing

Lauren’s business model is centered on developing long-term relationships with our clients. We excel at working as a team (both internally and with our alliance partners) and it shows. Our reputation for high quality, cost competitive work has earned us repeat business with such clients as LS Power, Black Hills Energy, Calpine, Texas Utilities, Monsanto, Eastman Chemical, Mobil, Alstom Power, Rohm & Haas, Anhueser Busch, Georgia Power, American Electric Power Company, Central and South West Corporation, DukeSolutions, KoSa, Phillips Petroleum, El Paso Energy, Oryx Energy, ITW/Signode,NavajoRefining,NuclearFuels,Horsehead Corporation and many others.

Lauren offers the following services through ourCorporateOfficeinAbilene,Texas,ourregionalofficesinIrving,Texas,Atlanta, Georgia, Knoxville, Tennessee, and our CanadiansubsidiaryofficesinCalgary,Vancouver, and Montreal.

In short, Lauren is a company that is known for helping our customers succeed by designing and building the highest quality facilities with timeliness, integrity and skill.

ABOUT US


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Industry Associations

Lauren is heavily involved with industry associations for construction and engineering. These associations allow Lauren to to stay in tune with industry best practices and establish meaningful peer relationships with key owners and vendors through events and committees.

Lauren is an active member of the following associations:

CII – Construction Industry InstituteCII is a consortium of leading owners, engineering and construction contractors, and suppliers who have a singular mission: to improve the cost effectiveness of

the capital facility project life cycle, from pre-project planning through completion and commissioning. By collaborating on important industry issues and by providing guidance on best practices discovered through research, the CII members are collectively an industry forum for the engineer-procure-construct process. Lauren is proud to be a member of the Construction Industry Institute and serves as an active participant on several of the best-practice research panels.

NCCER – National Center for Construction ExcellenceNCCERisanot-for-profit501(c)(3)educationfoundationcreatedin1996todevelop standardized construction, maintenance, and pipeline curricula with portable credentials and help address the critical skilled workforce shortage. NCCER’strainingprocessofaccreditation,instructorcertification,standardizedcurriculum,nationalregistry,assessment,andcertificationisakeycomponentin

the industry’s workforce development efforts. NCCER also drives multiple initiatives to enhance career development and recruitment efforts for the industry. Lauren is one of a limited number of contractors in theUSthathasqualifiedasanaccreditedtrainingsponsorwithNCCER.

ABC – Associated Builders and ContractorsAssociated Builders and Contractors (ABC) is a national association with 75 chaptersrepresenting23,000meritshopconstructionandconstruction-relatedfirmswithnearlytwomillionemployees.ABC’smembershiprepresentsallspecialtieswithintheU.S.constructionindustryandiscomprisedprimarilyoffirmsthat perform work in the industrial and commercial sectors of the industry. Lauren is an active participant in ABC events and maintains a presence on the ABC

Health and Safety Committee. Lauren has also received ABC merit awards for outstanding projects in the industrial sector.

CURT – Construction Users Round TableTheConstructionUsersRoundtable(CURT)wasfoundedinthefallof2000byconstruction and engineering executives representing major corporations all

acrosstheUnitedStatesandtheworld.Continuingthe30-yeareffortoftheConstructionCommitteeoftheBusiness Roundtable, CURT provides a national and international forum for the exchange of information, views, practices and policies of construction users from an array of industries. Lauren maintains membershipwithCURTasaContractorSubscriberAffiliate.

ABOUT US


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Cornerstone Commitments

Integrity Lauren’s commitment to integrity can be

summarized as, “We do what we say!”Many companies today claim to be committed

to integrity, but their actions are not in line with theircommitments.ForLaurenEngineers&Constructors our commitment to integrity involves morethanjustwords-ouractionsconfirmourcommitment.

We maintain an unwavering commitment to integrity throughout all levels of our company, which translates to peace of mind and value for our customers.

Safety Safetyisour#1priorityandwehave

developed a safety program that is second to none to support this commitment. Our goal is zero accidents, achieved through constant training, rigorous enforcement of safety procedures by all of our employees and accountability.

We understand that the success of a project is only achieved through strict implementation of our safety program, and this philosophy has allowed us to consistently maintain a safety rating well below the industry average.

Our safety program includes more than just promises and good intentions. We are committed tofulfillingourcommitmentstoourcustomerstoprovide safe, cost-effective, quality work.

As a testimony to this commitment Lauren has received numerous safety awards, including The Governor’s Award of Excellence, ABC - Safety Excellence Award, and ABC - STEP Diamond Award.

Quality Lauren understands that the quality of work

we provide is directly related to the people we hire. Therefore, we hire only the most competent, experienced and trained individuals. Additionally, we make sure that all of our employees are involved in regular training. Through this focus on continuous improvement, we have developed a reputation for providing quality work. Yet, our paramount concern continues to be not only meeting our customer’s expectations of quality but also exceeding them.

Performance Lauren is known as a contractor that

performs.Withqualifiedcraftprofessionals,weare prepared to perform in accordance with our commitments to meet the demands and schedule of each project. We understand the importance of limiting setbacks and delays, and we employ every means possible to perform responsibly, efficiently,andquicklytomeetthedemandsofourcustomers.

ABOUT US


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Safety

ABOUT US

Engrained within the Lauren culture is a firmcommitmenttoprovidingouremployees,subcontractors, vendors and other customers a workplace free of recognizable hazard. With safetybeingourfirstpriority,wehavedevelopedasafety program that is second to none in support of our commitment. Our program is augmented by extensive on-going employee training, policy and regulatory enforcement by all levels of management, and through an accountability process. To further enhance our program, we have created and implemented a Behavior Based Process, where in part, supervision participates in the recognition of Safe vs. At-Risk behaviors of workers.

In part, our safety program encompasses:

• Responsibility and Accountability for AccidentandFirePrevention

• Behavior Based Safety Processes

• Safety Education and Training

• Occupational Health

• Substance Abuse Program

• Accident Investigations, Trends, Reporting and Analysis

• Major Loss Causes, Reviews, and Remedial Actions

• Accident Prevention Procedures

• Hazardous Substance Communication

We understand that the success of a project and organization as a whole is only achieved through strict implementation of our safety and training program. Through this philosophy coupled with our commitment, Lauren Engineers & Constructors, Inc. has consistently maintained a safety rating below the industry average.

Our safety program includes more than just promises and good intentions; We are committed tofulfillingourcommitmentstoourcustomerstoprovide safe, cost-effective, quality work.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Major Project Timeline

ABOUT US


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

Solid Stating Facility$25,000,000

Modern ContinentalLas Vegas, NV

Install Gas-Oil Hydrotreater$25,000,000

Combined Cycle Power Unit$250,000,000

WellmanBay St. Louis, MS

Acciona EnergyBoulder City, NV

Bosque PowerLaguna Park, TX

DAKCharleston, SC

KosaSalisbury, NC

2000

2001

2004

2005

2006

2007

2008

2002

2003

Cogeneration Project$150,000,000

Navajo RefiningArtesia, NM

New Polymers Facility$28,000,000

DominionPossum Point, VA

P.E.T. Expansion Project$45,000,000

64 MW Solar Power Facility$230,000,000

Combined Cycle Power Unit$175,000,000

FP&L Martin Solar Energy CenterIndiantown, FL

Martin Hybrid Solar Power Plant - 75MW$400,000,000

2009

2011

Holly RefiningArtesia, NM

New ROSE Unit$60,000,000

Godawari Green EnergyRajasthan, India

New CSP Solar Plant - 50 MW$130,000,000

www.laurenec.comwww.laurenec.com

Our Offices

ABOUT US

901 South First Street • Abilene,TX 79602 • 325.670.9660

Corporate Headquarters 901SouthFirstStreetAbilene,Texas79602Phone:325-670-9660Fax:325-670-9663

Knoxville 139FoxRoad,Suite204Knoxville,Tennessee37922Phone:865-690-8610Fax:865-691-0321

Irving 1212CorporateDrive,Suite200Irving,Texas75038Phone:469-417-7600Fax:469-417-7650

Atlanta 3625BrooksideParkway,Suite450 Alpharetta,Georgia30022Phone:678-319-3100Fax:678-319-3130

Calgary - CANADA 300,736-6AvenueSWCalgary,ABT2P3T7Phone:403-237-7160Fax:403-237-7166

Manufacturing Office 550South18thStreetAbilene,Texas79602Phone:325-734-3704Fax:325-671-5455

Modular Assembly Shop28FirstStreetNWChoteau,MT59422Phone:406-466-5124Fax:406-466-5127


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

OUR CLIENTS

NUCLEAR FUEL SERVICES, INC.

LS Power, LLC


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Engineering

Project Development & Controls

• Feasibility Study

• Power Cycle Design

• Major Equipment Selection

• Environmental Permitting Support

• Site Development

• Financial Modeling & Support

• P & ID Development

• General Facility Layout

• Project Schedule

• ProjectScopeDefinition

• Budget Installed Cost Estimate

Mechanical Engineering • EquipmentSpecifications • Equipment Layouts

• Piping Design and Layout

• Piping Isometrics

• Pipe Support/Hanger Design

• Process Skid Design

• Steam System Design

Civil/Structural/Architectural

• Industrial Steel Design

• Foundation Design

• Site Development

• Architectural Building Development

Electrical Engineering

• Primary Power Service

• Electrical Distribution

• Facility Lighting

• Communication Systems

• Fire Detection Systems

• Alarm Systems

• Energy Analysis

• Emergency Electrical Power

Instrumentation Engineering

• Control System Design

• Instrument Loop Diagrams

• InstrumentSpecifications

• PLC & DCS Systems

• System Programming

Startup & Commissioning

• Registered Professional Engineers

• Power Plant Testing

Autocad Drafting

• Three Dimensional Modeling

• Microstation

Chemical Process Engineering

SERVICES & CAPABILITIES

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Construction

Registered Professional Engineers

ASME Code Stamps “A”, “PP”, “U”, “S” - National Board “R” Stamp

Licensed Electricians

Conceptual and Budget Estimates

Preliminary and Detailed Construction Engineering • Civil

• Structural

• Mechanical

• Piping

• Electrical

• Instrumentation

Shop Fabrication • Modular Equipment Skids

• Modular Piperack Assemblies

• Alloy Pipe Fabrication

• Pressure Vessels

• Custom Control Panels

• Specialty Platform Assemblies

• Specialty Plate Assemblies

Prime Contractor for Wide Spectrumof Process Industries • Electric Power Generation

• Polymers and Fibers

• OilandGasProduction/Refining

• Pulp and Paper

• Chemical Processing

• Industrial Manufacturing

• Special Metals

• Alternative Energy

Direct Hire - Construction andMaintenance Services • Millwrights

• Boilermakers

• Pipe Fitters & Welders

• Heavy Rigging

• Electricians

• Heat Tracing

• Instrument Fitters

• Instrument Technicians

• Ironworkers

Calibration, Startup, Commissioning


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Electric Power Generation• FullTurn-KeyEPC• SolarThermalPowerPlants• GasTurbine/Generators• GasTurbineCombinedCyclePlants• SteamTurbine/Generators• DistributedControlSystems• AshHandlingSystems• TurbineWaterInductionPrevention• PowerPipingInstallation• AuxiliaryPowerUtilityBoilers• BurnerManagementSystems• Baghouse&FlueGasDuctSystems• CondenserReplacement• Scrubber&PrecipitatorSystems• PlantWaterSupplySystems• SubstationDesign/Build

Oil and Gas• KeroseneUnitCrudePumpingStations• RheinformerAbsorptionUnits• AmineUnits• WellMeteringandInjection• SulfurRecoveryUnits• WaterReclamationFacility• NaturalGasGatheringSystem• OilyWaterTreatmentPlant• RefineryDistributedControlSystems• AsphaltPlantPiping• HydrotreaterUnits• NaphthaUnits• LiquefiedPetroleumGasTerminal

Industrial Manufacturing• EquipmentSetting&Calibration• Process/ProductionLines• UtilitySystems• Boiler&PipeFabrication• Instrumentation• FullScopeConstruction• DetailDesign&Engineering• BudgetEstimating• GrassRootsorRetrofits• PlantRelocations

Chemicals and Polymers• PolymerSemi-WorksFacility• PolymerSolidStatingFacility• EsterificationProcessAddition• FiberOpticPlantExpansion• ActivatedCarbonPlantUpgrade• DryingKilns• DistributedControlSystems• IodidesProductionFacility

Pulp and Paper• Complete Pulp Mills• Steam Generating Plants• Bleach Plants• TMP Plants• De-InkingFacilities• Paper Machines • Pulping Group• Steam and Cogen Plants• Environmental


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Power

Lauren and its acquired companies have been providing services to the electric power industryforsixdecades.Thisbeganwithdesignengineering services only in the 1950’s and now includes full capability engineering, procurement andconstructionservices.

Lauren’sbackgroundincludesdesign-buildservices for many power projects, including numerous generation, transmission, and substationprojects.

Generation projects have included gas/oil firedsteamelectricstations,combustionturbinefacilities in both simple and combined cycle, and coalandlignitefiredplants.Thesehaveincludedprojectsatgreenfieldsites,add-onunits,repowerprojectsandrenovationandbettermentprojects.

Lauren maintains a wealth of engineering andconstructionexperiencerelatedtonumerouscombustion turbine installations, simple and combinedcycle.TheseprojectshaveutilizedGELM6000, 7EA, 7FA and Siemens Westinghouse V84.2,V84.3,V84.3A,501D,and501Fengines.

Transmission projects have included voltages upto230kVandsubstationprojectshaveincludedvoltagesupto345kV.

Lauren has built a reputation for designing andconstructinghighvalue,efficientpowerplants.Ourprojectshavebeenamongtheleadersin $ per kW and several projects have been named“PacemakerProjects”byPowerMagazine.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Alternative Energy

Lauren is a leading EPC contractor serving thealternativeenergysector.Laurenservedasthe EPC contractor for FPL’s Martin Solar Power Project, a 75 MW Hybrid Solar Plant located in Indiantown,FL.TheMartinSolarPowerPlantisthesecondlargestsolarpowerplantintheworld.Lauren also served as the EPC contractor for the 64MWNevadaSolarOneparabolictroughsolarthermal power generating facility near Boulder City,Nevada.Atcompletionin2007,NevadaSolar One was the largest solar thermal project to be built in over 17 years and the third largest intheworld.Laurenisalsoactiveinbiodieselprocess design, freshwater recovery from brine, andoilsandprocessplantconstruction.

Lauren’sexperienceencompassesprojectconceptual design studies during the early project development phase through turnkey engineering, procurement,andconstruction.Laurenisalso

wellexperiencedinplantcommissioningandstart-up.Laurenroutinelyself-performsallaspectsofprojectexecutionwithadedicatedengineeringgroup,experiencedsitesupervisionandalargedirect-hireconstructioncraftbase.

Mostsimply,Laurenhastheexperiencetogetthejobdone.Frombeginningtoend,Lauren’sproject approach increases value for our customer through:

• Superior technical competence

• Accessibility to top management

• Responsiveness (low bureaucracy)

• Innovative project approaches

• Industry-leadingsafetyrecord

• PartnershipwithNCCERfor craft training


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Chemicals/ Polymers

Lauren’s strong knowledge of the process technologies in commodity and specialty chemicals and polymers makes us uniquely qualifiedtoprovideengineering,procurementandconstruction services in these highly competitive markets.

Ourexpertiseandvalue-enhancingpracticesboth in design and vendor relationships allow us

todeliverfasterandlowercostpolymerfacilities.Lauren’s built facilities range from grass root plantstomodificationsandexpansions,inordertosupportthedemandsofnewmarkets.

We clearly understand the critical needs associated with time to market demands and can quicklyassembleanexperiencedteamtodeliverafast-tracktotalsolution.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Refining

Lauren offers full scope EPC services to the oil & gas industry for the construction of new facilitiesandrevampsofexistingfacilities.Theseservices include:

Overall project management from economic studiesthroughunitstartup.

Process design and equipment specification,including:

• Crude Distillation

• Vacuum Distillation

• NaphthaCatalyticReforming

• Hydrodesulfurization

• Fluid Catalytic Cracking

• Alkylation (Sulfuric and HF)

• Thermal Visbreaking

• ProductTreating(Merox,Bender, Caustic,etc.)

• Cryogenic Recovery of Light Hydrocarbons

Lauren has also successfully applied its own process technology in conjunction with third party technology, participating in the installation of UOP’sFluidCatalyticCracking,HFAlkylation, andMeroxunits.

We are uniquely positioned to support our NorthAmericancustomersastheyfacethechallenges of new regulatory work and we are committed to deliver optimum performance and lowerinstalledcosts.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Fabrication Facilities

• 40,000 Square Foot Enclosed Shop Area

• 3,500SquareFootOfficeArea

• 40 Acres of Outside Fabrication and Storage Area

• Adjacent Rail Spur

• Automated Welding and Cutting Equipment

• In-HouseFullScopeDesignEngineering&Detailing

• ASMECompliantQualityAssuranceProgram(A,PP,U,R&SCodeCertifications)

• MaterialPurchasingandExpediting

• ComputerizedSchedulingandTrackingProcesses

• CNCPipeBenderupto3”Capacity

• State-of-theArtInductionHeatTreatmentEquipment

• In-houseGritBlastingandPainting


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Fabrication Services

Assemblies

• Pipe Spools

• Pipe Supports

• Process Skids

• Pipe Rack Modules

• Control Panels

• Plate Assemblies

• Pressure Vessels

• Boiler Components

• Platforms

Services

• Automatic Welding

• Stress Relieving

• Polishing

• Painting

• Grooving

• Machining of Special End Preps

• ComputerizedSchedulingandTracking

• ComputerizedMaterialControl


LaurenEngineers&Constructorsisexperiencedwithmanydifferenttypesofmaterials,includingcarbonsteel,stainlesssteel,aluminum,titanium,inconel,carpenter20,hastelloy,andchromemolyincludingP91.Weworkunderourin-housequalityandsafetyprogramsandmaintain“A”,“PP”,“U”,“R”&“S”codestamps.

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization

In today’s fast paced construction arena, scheduling and logistics can be the catalyst by whichprojectsaremadeorbroken.Modularconstruction can give a project the edge that is needed to meet the seemingly unachievable schedulesthatareoftenrequired.

Listed below are some primary advantages:

• Reductionoffieldmanpowerrequirements

• Mitigation of permitting delays

• Averagecostsavingsof30%over on-siteconstruction

• Simplerandsaferfielderection

Processskidsandpipe-rackmodulescanbeready to set in place and connected to adjacent processeswithease.Ourstaffofengineers,designers, fabricators and constructors can help to makeyournextproject’sschedulingmanageable.

From the conceptual stage through engineering, fabrication and installation, we are readytomeetthechallenge.Withourmultiplecraft disciplines and nearly 40 acres of fabrication and storage space at our facility, we are able to meet the needs of industry no matter what the requirements.Whetheryouneedequipmentskidsor pipe rack modules, we can custom build to yourspecificprojectrequirements.Wehavetheexperiencetopullitalltogether.

Other capabilities include:

• Process Control Systems

• Automation of Custom Material Handling Systems

• PLC Programming

• Control Panel Design, Fabrication andCircuitVerification


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Industrial Services

Laurenisanexperiencedindustrialservicesspecialist for industrial plant and EPC contract clients,offeringfull-scopeservices,mechanicaland electrical services, and general construction services.

Lauren’s clientele for service and maintenance work scopes includes the paper and pulp industries, power generation facilities, manufacturing and production plants, and the petrochemicalsindustries.

Our main goal is creating value for our customers.Todothis,weareuniquelypositionedas an entity of Lauren, allowing for quick action in

response to discoveries of unique problem areasduringoutages.Whethertheneedisfabrication and materials supply or an immediately available short term crew augmentation, Lauren is equipped and ready torespondtoourcustomer’sneeds.

Beyondourcustomer-focusedworkethic,Lauren maintains a clear picture of employer safetyandhealthcriteria.Oursafetypracticesand procedures support an individual commitment to safety on the part of all project personnel, resulting in associates who leave the workplace healthy, uninjured, and productive at the end of everyday.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Florida Power and Light 75 MW Hybrid Solar Power Generating Facility Alternative Energy, Indiantown, Florida

Lauren was selected as the EPC contractor to build a 75 MW power generating facility in Indiantown, FL - the largest-capacity solar thermal plant to be built in the last two decades and the second largest in the world. The project was located on 500 acres of land adjacent to FPL’s Martin Plant. Using Parabolic Trough Technology to capture heat from the sun, this project includes approximately 190,000 parabolic mirrors, generating 155,000 MWh of power annually – enough power for 11,000 homes or 26,000 people.

• The second largest solar thermal powerplant in the world

• The largest solar thermal plant outside of California

• Thefirsthybridsolarfacilityintheworld to connect to an existing combined-cycle power plant

Power

Project ContactMark [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Bosque Power Plant Project Bosque Power Company, LLC Combined Cycle Power Plant, Laguna Park, Texas

Bosque Power Company, LLC. awarded Lauren a contract for the expansion of the Bosque County Generating Plant. The Bosque Expansion Project involved the conversion of two existing simple-cycle combustion turbine units intoa(2x1)combinedcycleconfiguration.Theconversion increased the nominal output of the Bosque Plant from 546 MW to 770MW. Lauren’s

scope also included an SCR installation which included installation of the catalyst bed, catalyst and ammonia injections system. The ammonia injection system involved off-loading and storage facilities, ammonia transfer pumps and piping, ammonia vaporization pumps and piping and the control systems.

Power

Project ContactJeff [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Godawari Green Energy50 MW Solar Power Generating FacilityAlternative Energy, Gujarat, India

Power

Project ContactClint [email protected]

The Godawari (guhd-awe’-ree) Solar Project, located in the Indian state of Rajasthan, about 50 km from the Pakistan border, is an EPC contract with Godawari Green Energy Ltd and includes the design, procurement and construction of a 50 MW Concentrated Solar Power (CSP) facility.

The Godawari Solar Project utilizes 12m Euro Trough frames with over 161,000 mirrors,

combining for a total of 120 loops, which will circulate 1,100 metric tons of HTF fluid. The project is located on 400 acres of land and will provide 130 GWh of power to the national grid annually. The Godawari Solar Project is one of six projects in Phase 1 of the National Solar Mission.

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


64 MW Solar Power Generation Facility Project Solargenix Energy, 64 MW Solar Power Generating Facility Project Alternative Energy, Boulder City, Nevada

Lauren was selected as the EPC contractor to build Nevada Solar One (NSO) - a 64 MW power generating facility in Boulder City, Nevada - the largest-capacity solar thermal plant to be built in the last 17 years and the third-largest in the world. The project uses the latest in concentrating solar technology.

The plant consists of a Power Block area and a400-acrefieldofmirrorarraysthatfocustheheatofthedesertsunintoaheattransferfluidsystem. Completion date was the third quarter of 2007.

• $250 Million Solar Plant

• 64 MW of Solar Power

• Power for 48,000 Homes

• 3rd Largest Solar Plant in the World

• 219,000 Parabolic Mirrors

• 1.5 Million Man-hours

• 14 Month Fast-track EPC Project

• 700 Craft Personnel During Peak

Construction Efforts

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Lime Slaker Retrofit ProjectALSTOM Power, Inc. Omaha Public Power District, Nebaska City, NE

The scope of this project involved the installation of a lime slaking system (“slaker-in-a-can”) that converts pebble lime to lime slurry to be injected into an existing flue gas desulfurization system.

The main component of the system is a field erected steel vessel 22’ diameter by 100’ tall with a solids storage silo, two equipment operating levels, and a slaking tank on the bottom.

Lauren installed the vessel, all mechanical equipment, auger cast piles and pile cap, foundations, extended existing pump building. Lauren’s scope included associated balance of plant piping and electrical systems and instrumentation.

Power

Project ContactJamie [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Cogeneration Facility Project CNRL Cogeneration Facility Project, Fort McMurray, AB, Canada

Canadian Natural Resources Limited (CNRL) contracted Lauren to perform Construction Management services to assist with the installation of a new Co-Generation plant in Ft. McMurray, Alberta, Canada. Scope of Lauren’s work included managing the construction execution plan up to the pre-commissioning activities for all Co-Gen plant facilities, including water treatment, steam and power generation block, natural/fuel gas system, transmission and main substation, and satellite operations center.

This project represents a small portion of the CNRL Horizon Oil Sands Project. The entire CNRL project (valued at $7.5 Billion) is focused on developing the available bitumen reserves that are recognized in the oil sands by installing facilities to mine the oil sands, extract the bitumen, and upgrade the bitumen to generate synthetic crude oil to be sold as a product.

Power

Project ContactCharlie [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Las Vegas Cogen Project Black Hills Energy 225 MW EPC Cogen Power Project, Las Vegas, Nevada

Lauren performed the engineering, procurement, and construction of an additional 225MW of generation capacity to Black Hills’ Las Vegas Cogeneration II Power Plant. Scope of work included four LM 6000 gas turbine

generators in combined cycle, two 28 MW steam turbine generators, four once-thru heat recovery steam generators, gas turbine inlet chilling systems and all required balance of plant equipment.

Power

Project ContactMike [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


550 MW Combined Cycle Project Dominion Energy 550 MW Combined Cycle Project, Dumfries, Virginia

Lauren was the General Contractor for the installation of a 550 MW combined cycle power plant. Project consisted of 2 GE 7FA combustion turbines, two heat recovery steam generators, one 200 MW steam turbine, one 8 cell cooling tower, water treatment facility, one 2 million gallon demineralized water storage tank, one 2.25 million gallon fuel oil storage tank, fuel unloading

facility, 3 GSU transformers, all underground ductbanks and utilities, 96” circulating water system, piping river water intake pump system, andfinalsitework/roads.Theprojectwaslocatedinanexistingcoalfiredpowerplantfacility.Project was a ground up installation through start-up and commissioning.

Power

Project ContactBob [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Batesville Water Treatment Project LS Power, LLC Water Treatment System, Batesville, Mississippi

Lauren was responsible for the engineering, procurement and construction of a 5,500,000 gpdc pre-treatment system for plant cooling and de-mineralized water at the LS Power, LLC Batesville Energy Plant. The basis of the design

wasaKrugerclarifiersystemthatincludedcoagulation, chemical injection, maturation and settling. The work included design and construction of civil works, mechanical, piping, electrical and instrumentation systems.

Power

Project ContactBryce [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Mustang Station Generating Plant Project LS Power, LLC Water-Gathering System for Power Plant, Denver City, Texas

Lauren was responsible for the design and construction of a water-gathering system for a 500MW merchant power plant located in West Texas. Scope of work included development of approximately 40 water wells, booster pump station, pipelines, control systems, and SCADA system for operation of the plant water supply system.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Lignite-Fired Power Plant Project San Miguel Electric Cooperative Lignite-Fired Power Plant Project, San Miguel, Texas

Lauren was responsible for all design and procurementofthisgreenfield,single-unitlignite-firedpowerplantfortheSanMiguelElectricCooperative. The plant burns Texas lignite and is located at the mine mouth. The plant has a generating capacity of 450 MW. The back end

environmental control equipment includes an electrostaticprecipitator,SO2scrubberandfluegas desulfurization waste treatment system. The plant is designed for zero discharge and is recognized for its low $ cost per KW and high availability.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Frontera Power Station Project CSW, Inc. 2 x 1 Combined Cycle Power Facility, Mission, Texas

Lauren was named “Owners Engineer” for this 500 MW combined cycle plant project.Responsibilities included due diligence review of design, procurement, and construction, all off site facilities and construction management. This project consisted of two GE 7FA combustion turbines, two Nooter/Eriksen HRSG’s and an ABB steam turbine.

Power

Project ContactRobert [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Batesville Substation Project LS Power, LLC New Substation & Transmission Lines, Batesville, Mississippi

Lauren was responsible for the design and construction of a new 161/230 kV substation and transmission lines for an 834MW merchant power plant, located in Mississippi. Scope of work included design and installation of eight 161 kV overhead lines for connections to plant GSU and Auxiliary Transformers, two 161 kV transmission lines to interconnect with a TVA substation, and one 230 kV transmission line to interconnect with

an Entergy substation. Design and installation of the substation included (13) 161 kV Circuit Breakers, (18) 161 kV disconnect switches, four 240/320/400 MVA 161-230 kV auto-transformers, rigid bus systems (rated 161kV and 230 kV), control building, AC and DC auxiliary power systems, protective relay panels for substation and transmission line protection, and a SCADA RTU system.

Power

Project ContactGary [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Facility Project Golden Spread Power Cooperative 2 X 180 MW Mustang Station, Unit 4 & 5, Denver City, Texas

Lauren performed the detailed engineering of a simple cycle gas turbine (Unit 5) at Mustang Station. Following on the heels of Lauren’s successful completion of Unit 4, this contract included detailed engineering as well as a partnership for the EPC installation.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Northeastern Power Station Repower Project Central and South West Services, Inc. 2 x 1 Combined Cycle – Retrofit, Oolagah, Oklahoma

Lauren was responsible for the EPC work for the Northeastern Unit 1 repower project. The project included the installation of two GE 7FA combustion turbines and Nooter/Eriksensupplementalfiredheatrecoverysteamgenerators (HRSG) to repower an existing 175 MW Westinghouse steam turbine. This repowered plant produces a combined output of approximately 500 MW.

Design responsibilities included all support facilities for the new combustion turbines and HRSG’s as well as design of piping systems to interface with the existing steam turbine cycle piping. Lauren’s responsibilities also included overall management of the design and construction work as the EPC contractor.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


EPC Project Old Dominion Electric Cooperative 510 MW Five Unit Simple-Cycle Power Facility, Louisa County, Virginia

Laurenwasresponsibleforthegreenfieldinstallation of 4 dual fuel GE 7EA’s and 1 dual fuel GE 7FA combustion turbine. Project scope also included fuel unloading and storage facility, gas conditioning equipment, startup and commissioning and plant building.

This was a fast-track project with a 14 month schedule from award to commercial operation.

Power

Project ContactBob [email protected]

Power

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Oklaunion Power Station Central and Southwest Vernon, Texas

The scope of this project included the design and procurement responsibility for this 720 MW sub-bituminouscoalfiredpowerplant.Thebackend environmental control equipment includes an electrostaticprecipitator,SO2scrubberandfluegas desulfurization waste treatment system.


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Gibbons Creek Steam Electric Station Texas Municipal Power Authority Bryan, Texas

The scope of this project included the design and procurement responsibility for this 450 MW Lignitefiredplant.Thebackendenvironmentalcontrol equipment includes an electrostatic precipitator and SO2 scrubber.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Brine Concentrator “C” Installation Entegra Power Group, LLCGila River Power Station, Gila Bend, Arizona

Lauren was responsible for the construction of a third Brine Concentrator (BC-C) at the Gila River Power Station in Gila Bend, Arizona. Lauren’s scope included the receipt and installation of the brine concentrator, ancillary equipment, structural steel, piping, and electrical and instrumentation components provided by the BC system vendor’s

scope of supply. Lauren also was responsible for the supply and installation of all Balance of Power (BOP) material and components outside the BC system vendor’s scope of supply. Lauren began work on the facility June 2010, with mechanical completion achieved three weeks ahead of schedule.

Power

Project ContactJerry [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Escalante Power PlantSteam Distribution Piping & Water Quality Upgrade Plains Electric Generating Cooperative, Inc., Prewitt, New Mexico

Lauren’s prime contract required additions to an existing building to house new steam generation and water treatment equipment. Additionally, the work scope included new steam piping, electrical, power wiring, instrumentation systems, thermal insulation and painting.

Power

Project ContactGary [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Cogeneration Unit Addition Sid Richardson Carbon & Energy Co. 24 MW CHP, Big Spring, Texas

Lauren was responsible for the engineering design,equipmentprocurementspecificationandcontract administration for a 24MW electricity generating plant utilizing a Rentech Waste Heat Boiler, Siemens ST 3-C Steam Turbine Generator and Marley Air Cooled Condenser. This project involved installation of a cogeneration unit at Sid

Richardson Carbon Company’s Big Spring Carbon Black Plant, located in Big Spring, TX. The waste heatboilerutilizingfluegasfromtheincineratorwas used to provide steam to the 24 MW turbine-generator. The work included design of civil, mechanical, piping, electrical and instrumentation systems.

Power

Project ContactJack [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


501 Simple Cycle Power Plant Siemens Westinghouse Power Corp. Bennett Mountain Home Power Project, Mountain Home, ID

Scope included all engineering services for a 164 MW 501F simple cycle power plant facility located at Mountain Home, Elmer County, Idaho.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


501 Simple Cycle Power Plant Siemens Westinghouse Power Corp. Evander Andrews Power Project, Mountain Home, ID

This project added 164 MW utilizing 501F Simple Cycle Power Plant facility located at Evander Andrews Power Complex north of Mountain Home, Idaho. This turnkey project included all engineering services for the plant.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Plant Omaha Public Power District / Siemens 322 MW Cass County Project, Cass County, Nebraska

This project involved Two (2) 501F Combustion Turbines in Simple Cycle. Lauren designed the site work, concrete structures, plant buildings, balance of plant mechanical systems and balance of plant electrical systems for this plant in Cass County, NE.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Plant AEP/Siemens Westinghouse Power Corp. Holden Power Project, Holden, Missouri

Lauren’s responsibilities included design of site work, concrete structures, plant buildings, balance of plant mechanical systems, and balance of plant electrical system for three Siemens V84.2 combustion turbine simple cycle units.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Combined Cycle Power Plant Assoc. Electric Coop. / Siemens Westinghouse Power Corp. St. Francis Power Station, Campbell Missouri

This combined cycle project added 245 MW of power utilizing two (2) Siemens V84.3A, two (2) Siemens Steam Turbines, and two (2) ATS HRSG’s. Detailed engineering scope included site work, foundations, underground mechanical and electrical, and critical piping systems.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Plant Oglethorpe / Siemens Power Sewell Power Station, Cedar Town, Georgia

This Simple Cycle project involved engineering services for two (2) Siemens V84.2’s, and two (2) Siemens V84.3’s. Detailed Engineering included site work, foundations, and underground mechanical.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Plant Brazos Electric Power Cooperative Randall Miller Power Plant, Palo Pinto, Texas

This Simple Cycle project involved the design and procurement of two (2) Westinghouse 501D’s.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Simple Cycle Power Plant Oglethorpe / Siemens Power Smarr Power Station, Smarr, Georgia

This Simple Cycle project involved two (2) Siemens V84.2’s. Detailed Engineering included Site Work, Foundations, and Underground Mechanical and Electrical.

Power


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


L1/P3 PET Resin Expansion Project Wellman, Inc. L1.P3 PET Resin Expansion, Bay St. Louis, Mississippi

Lauren provided the engineering, procurement and construction services for Wellman’s Pearl River Plant P.E.T. Resin expansion, located in Port Bienville Industrial

Park, Bay St. Louis, Mississippi. This project included the addition of 300 million pounds of additional solid stating capacity annually to the facility, using Buhler technology.

Polymers

Project ContactDon [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Polymer Expansion Project DAK Americas Polymer Expansion Project, Charleston, South Carolina

Lauren was responsible for detailed engineering, procurement, and construction for this polymer expansion project. The project included the addition of a new 450 ton/day solid stating facility, using proprietary Buhler technology. The project also included the addition of IPA handling and mixing facilities, increasing

the capacity of the existing melt phase process, and installation of material handling facilities including storage and railcar loading and unloading. Plant utilities were also upgrades on this project. The work was fixed price and was completed in fourteen months.

Polymers


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Solid Stating Facility Project KoSa Solid Stating Facility Project, Salisbury, North Carolina

Lauren was responsible for the engineering, procurement, and construction of a new fiber solid stating facility at Salisbury, North Carolina, using proprietary Buhler technology. Work on this fixed price contract included foundations, structures,

buildings, convey systems, equipment, piping, electrical, instrumentation and control systems. This project was completed twelve months after receiving the notice to proceed.

Polymers


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Polymer Solid Stating Plant Project Eastman Chemical Company Eastman Solid Stating Plant, Columbia, South Carolina

Lauren was responsible for the design and construction of this Polymer Solid Stating Plant in Columbia, South Carolina. The design was prepared concurrent with construction to support the aggressive schedule for project completion. A new four-level steel-frame process building [19,000 sq. ft.] was constructed to house the new process systems. The process equipment scope included the installation of large heaters, reactors, and storage bins in addition to numerous

pumps, blowers and cyclones. The product piping systems were large diameter [18” to 60”] low pressure systems made from stainless steel material. All lighting, branch circuits and control wiring systems utilized the extensive cable tray and steel conduit systems. The project was commissioned for operation thirteen months after the start of detailed design.

Polymers


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Oxidizer Air System Upgrade Duke Solutions Oxidizer Air System Upgrade, Kingsport, Tennessee

Lauren provided conceptual engineering, scope development, detailed engineering, procurement, construction and start-up for upgrades to Eastman Chemical’s TPA oxidizer air system. This project included a new 500 HP air compressor, automating seven existing

compressors and computer control and load sharing for eleven compressors. Work on this fixed price contract included foundation, structures, equipment, piping, electrical, instrumentation and control systems.

Chemicals


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Plant Air System Upgrade Duke Solutions Plant Air System Upgrade, Columbia, South Carolina

Lauren was responsible for design and construction of upgrades to the Carolina Eastman plant air system. Scope included the installation of air dryers, the automation of several compressors

and the installation of numerous water removal traps. The work also included foundations, structures, equipment, piping, electrical, instrumentation and controls.

Chemicals


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Froth Treatment Plant Project CNRL Froth Treatment Plant Project, Fort McMurray, AB, CA

Canadian Natural Resources Limited (CNRL) contracted Lauren as the General Contractor to construct a Froth Treatment Plant at the Horizon Oil Sands Project in Ft. McMurray, Alberta, Canada. Scope of Lauren’s work included inclined

plate separators, froth area, cyclone area, main pipe racks, Naphtha Recovery Unit and Vapor Recovery Unit, electrical substation, and dump pond area for the Froth Treatment Unit.

Refining

Project ContactTom [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


New ROSE Unit Project Holly Refining New Rose Unit Project, Artesia, New Mexico

Lauren was awarded a Lump Sum contract to build a new ROSE Unit located at the Navajo Refinery in Artesia, New Mexico. Lauren’s scope of work included the design, procurement, and installation of a ROSE Unit utilizing KBR technology. Detailed scope included DCS

programming, electrical, instrumentation and all piping. Throughput capacity of the ROSE unit is 18,000 BSPD. During peak construction, Lauren employed over 100 people at the site. The project, from start to mechanical completion, lasted 23 months.

Refining

Project ContactTerry [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Install Gas-Oil Hydrotreater Unit Project Navajo Refining Install Gas-Oil Hydrotreater Unit, Artesia, New Mexico

Lauren was responsible for all detail engineering design and construction of a gas-oil hydrotreater unit that had been relocated from Lawrenceville, Illinois and transported to the Navajo site in Artesia, New Mexico. Engineering

scope included all foundation/ civil design, piping drawings & isometrics, pipe stress analysis, pipe rack design, process valve sizing, relief valve sizing, underground duct banks and grounding.

Refining

Project ContactBill [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Relocation of Hydrotreater Unit Project Valero Energy Corporation Relocation of Hydrotreater Unit, Alma, Michigan

Lauren was responsible for the dismantling and shipping of a Light Cycle Oil Hydrotreater Unit from Alma, Michigan to Denver, Colorado.

Refining


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Zinc Kiln Project Horsehead Corporation Zinc Kiln Project, Rockwood, Tennessee

Horsehead Corporation awarded Lauren an EPC contract for a new kiln for a Zinc reclamation facility in Rockwood, TN. The scope of this work included a new rotary kiln, materials handling,

and ancillary equipment. Lauren employed an average of 80 workers at the site during the duration of the project. Completion of on-site work was achieved on time and on budget.

Special Metals & Material Handling

Project ContactTushar [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Ash Separating Project Separation Technologies, Inc. Ash Separating Project, Gibsonton, Florida

Separation Technologies LLC awarded Lauren an EPC fixed price contract for a fly-ash separation facility, located at Tampa Electric Power Company’s Big Bend Power Plant in

Gibsonton, FL. Project systems included dust collection and appurtenances, ash conveying, storage, as well as controls for ash and carbon handling.



“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Ash Handling Project - EPC Separation Technologies, Inc. Ash Handling Project - EPC, Hattiesburg, Mississippi

Lauren was responsible for providing detailed design, procurement and construction for this fly ash separation project, which processes fly ash using Separation Technologies, Inc.’s proprietary electrostatic carbon separation and ammonia removal technology. The project included ash

and lime conveying and storage systems, control systems, dust collection systems and their appurtenances. This project was located at the Morrow Generation Plant, and production start-up was one month ahead of schedule.



“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Ash Handling Project - EPC Separation Technologies, Inc. Ash Handling Project - EPC, Jacksonville, Florida

Lauren was responsible for providing detailed design, procurement and construction for this fly ash separation project, which processes fly ash using Separation Technologies, Inc.’s proprietary electrostatic carbon separation and ammonia removal technology. The project included ash

and lime conveying and storage systems, control systems, dust collection systems and their appurtenances. This project was located at the St. John’s River Power Plant and was a fixed price contract.



“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization International Alliance Group Selexol & CO2 Frac Plant, Fort Stockton, Texas

Lauren has executed four contracts for the fabrication of modular pipe rack assemblies and process skids for the Selexol & CO2 Fractionation Plant in Fort Stockton, Texas. As part of this work, Lauren built and assembled 24 pipe rack modules (900’ in total length), with over 17,000 linear feet of pipe and an estimated 638 tons of structural steel. All modules were first staged at the Lauren Manufacturing Facility in Abilene, Texas. Each module, up to 16’x16’x90’ and 100 tons, were then disassembled and delivered for final assembly at the Fort Stockton project site.

Additionally, Lauren fabricated 4 parallel pipe rack modules (800’ in total length), utilizing over 11,400 feet of linear pipe, as well as an estimated 548 tons of structural steel. The scope also included 24 process skids (60’ in average length) and entailed the use of over 12,000 feet of linear pipe, as well as an estimated 537 tons of structural steel. Each skid measured up to 20’ x 20’ x 60’ and weighed in at around 30 tons. Thirteen of the skids were assembled in Abilene, with eleven being shipped loose for assembly at the project site in Fort Stockton, Texas.

Fabrication

Project ContactTim [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization Florida Power & Light75 MW Hybrid Solar Power Generating Facility Pipe Fabrication and Modular Assemblies, Indiantown, Florida

Lauren’s Manufacturing Facility in Abilene, TX supported the 75 MW Martin Next Generation Solar Energy Center with the fabrication of large bore steam piping for the power block area, heat transfer piping loops in the solar field, and fabrication of the process equipment skid that was part of the heat transfer fluid system. Over 2,100 spools of carbon steel (average size 3 inches) were fabricated, using more than 27,000 linear feet of pipe. This facility also fabricated and

assembled a Ullage skid using 50 spools, also averaging 3 inches. All materials on this project were delivered on time, with a rejection rate of only 1.37%.

This project was located in Indiantown, FL and is the largest-capacity solar thermal plant to be built in the last two decades and the second largest in the world. It is also the first hybrid solar facility in the world to connect to an existing combined-cycle natural gas power plant.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization GE Water / RCCEquipment Skids, Various Locations

Since 1996, Lauren has designed and fabricated 16 projects for this customer, including several water treatment equipment skids along with associated access platforms and ladders for power projects requiring recycled water. Skids are shipped complete with all piping and electrical installed and tested for ease of installation on site. Customer furnished P&ID’s, specifications and major equipment.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Solar Power Facilities Solargenix Nevada Solar One Project, Boulder City, NV

Lauren’s fab shop supported this unique project in several areas, including solar field metals, components, electrical panels, pipe fabrication, supplemental steel for pipe supports, process equipment skids, and 54” cooling water piping.

• 104,000 Man-hours

• $17,000,000 Fabrication Project

• No Lost Time Safety Incidents

• Average of 65 Craft Workers

• 14 Month Fast-track Project

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Polymers Pipe Fabrication DAK Americas Polymers Pipe Fabrication Project, Charleston, South Carolina

Lauren performed detailing and fabrication of all large bore pipe fabrication and supports for this grass roots EPC polymers project in Charleston, South Carolina. Pipe sizes ranged up to 56” diameter. Lauren also fabricated jacketed piping for this project.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Pipe Fabrication Bosque Power Fabrication Pipe Fabrication, Laguna Park, Texas

Scope of the project included fabrication of all piping, including high-alloy chrome power piping up to 24” (heavy wall P91). Additionally, Lauren fabricated all supplemental pipe supports,

miscellaneous steel, as well as all electrical panels (relay PLC and control). The total project included close to 1,000 pipe spools.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Refinery Piping Navajo Refining Rose Unit Project, Artesia, New Mexico

Lauren completed fabrication of all piping for a new ROSE Unit in Artesia, New Mexico. 1,200 pipe spools were completed and shipped to the jobsite, including 5% chrome piping manufactured to B31.3 service. Lauren has a long history and

an extensive relationship with Navajo and has also completed fabrication of all the carbon steel piping in support of our Gas-Oil Hydrotreater Project in Artesia, New Mexico. Piping was fabricated to B31.3 severe standards.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization Bosque Power, LLC Combined Cycle Expansion Project, Laguna Park, Texas

Lauren fabricated eight pipe rack modules for this project. Modules included piping for main steam, hot reheat, cold reheat, low pressure steam, and other utility systems. Piping was fabricated complete with all necessary pipe

supports, painting, heat trace, and insulation. This project was coordinated closely with the job site for delivery sequencing, minimizing site lay-down and congestion.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization Black Hills Corporation Pipe Fab and Modular Equipment Skids, Las Vegas, Nevada

Lauren completed fabrication of all 2” and larger piping (including underground) and (24) modular equipment skids for Lauren’s 225MW fast track EPC Cogeneration II Project in Las Vegas, Nevada. This included fabrication and pre-assembly of a 600’ main pipe rack in 60’

lengths – complete with piping (in position) with supports, guides, painting and insulation. Not including the underground and rack piping, Lauren fabricated 1,330 spools with 8,100 welds within 5 months. Lauren also fabricated all required electrical panels.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization Peerless Manufacturing Process Equipment Skids and ASME Vessels, Dallas, Texas

Lauren performs overflow fabrication of equipment skids and ASME code vessels on an ongoing basis.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization McNeil Specialties Corporation Pilot Skids for Food Research Project, Athens, Georgia

Lauren was responsible for designing and fabricating three food processing research skids for McNeil Specialties. All skids were 40’ x 8’ x 8’ and included steel frameworks, process equipment, piping and elaborate control systems. The framework was galvanized and most of the equipment and piping was stainless steel.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Modularization Modular Piperack Assemblies, Linde BOC - Gas Plant

Lauren Manufacturing fabricated 10 piperack modules in support of a fast track gas plant for Linde, with all modlues successfully shipped on time. Steel frame was welded and finish painted. All pipe was pressure tested, painted, electric traced, and insulated as required.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Process Equipment Skids and ASME Vessels NATCO - National Tank Company Process Equipment Skids and ASME Vessels, Houston, Texas

Lauren has performed numerous contracts for fabrication of separator vessels along with Amine process equipment skids for this repeat customer.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Substation Electrical Panel Fabrication LS Power, LLC Substation Electrical Panel Fabrication, Batesville, Mississippi

Lauren designed and fabricated (12) large electrical relay cabinets and aluminum bus and support towers for this project with LS Power, involving a new 161/230 kV substation and transmission lines for an 834MW merchant power plant located in Batesville, Mississippi.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


ModularizationHPD Veolia WaterWater Treatment Evaporator & Crystallizer System, Fort McMurray, Alberta, Canada

Lauren fabricated multiple Pipe Rack and Process Equipment Modules in support of HPD’s Produced Water Evaporator Package for (2) Steam Assisted Gravity Drain (SAGD) projects in the Oil Sands region near Fort McMurray, Alberta Canada. Scope includes heat trace and insulation, hydrotesting of piping, bench checks of instruments, and wiring of instruments

to skid mounted junction boxes. Additionally, scope included all ship-loose piping with flanged connections to eliminate virtually all field welding, of particular benefit due to the harsh working environment.

All Process Equipment Skids and Piperack Modules were completely pre-assembled and trial fit to the greatest extent possible.

Fabrication


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Naphtha Splitter Project Holly Corporation Naphtha Splitter Project

Lauren was issued a contract to install a new Naphtha Splitter at Holly Corporation’s Navajo refining facility in Artesia, NM. Scope of work included equipment erection, piping fabrication and erection, off sites piping demolition, stress

relieving, steam tracing installation, structural steel fabrication & erection, ladder and platform fabrication & erection, scaffolding, painting of piping, equipment, and structural steel & conduit.

Industrial Services


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


ISBL Installation Work HESS Corporation ISBL Installation Work, Seminole, Texas

Lauren received a contract to perform ISBL installation work at the Seminole Gas Processing Plant which is located near Seminole, TX. Specific work for Lauren included erection of ISBL

pipe racks, shop fabrication of piping, installation of piping, cable trays, valves and instrumentation, insulation, ISBL tie-ins, and system hydro testing.

Industrial Services

Project ContactDave [email protected]

“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Plant Upgrades TXU Plant Upgrades, Sandow, Texas

Lauren worked closely with TXU Sandow Steam Electric Station in Rockdale, TX for upgrades to the Sandow Plant. Scope of this work included several small projects which directly supported the construction of the new unit and several other small projects indirectly associated with the new unit.

Lauren’s scope included systems upgrades, systems expansions, systems re-power, and systems relocation projects.

Industrial Services


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Outage Support, Lake Creek Plant TXU Outage Support, Lake Creek Plant, Waco, Texas

Lauren personnel completed critical outage support to TXU’s Lake Creek plant near Waco, TX. Industrial Services supported TXU personnel for maintenance support, construction support, and upgrade items.

Industrial Services


“Des

igni

ng &

Bui

ldin

g S

ucce

ss”


Maintenance and Support Navajo Refining Maintenance and Support, Artesia, New Mexico

Lauren Industrial Services provides ongoing small project support to Holly’s Navajo refinery in Artesia, NM. Work includes new systems installation, systems piping replacement and re-routing, systems modifications, and other maintenance and support activities.

Industrial Services


Documents

Lauren Engineering Brochure