Upload
doannga
View
215
Download
0
Embed Size (px)
Citation preview
ansonMansonM SPECIAL PURPOSE POWER SUPPLYSPP - 8250 / 8251High Current Rack Mount Switching Mode Power Supply
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Specifications
Rated Output Voltage
Rated Output Current
Ripple & Noise (peak-peak)
Load Regulation (0-100% Load)
Line Regulation (190 - 254VAC Variation)
Input Voltage
Dynamic Power Factor Correction
Efficiency
Cooling Method
Protection Devices
Approvals
Indicators
Dimensions (WxHxD)
Meter Accuracy
Meter Type
Weight
Casing
Models SPP-8250 SPP-8251
25A 28A
200mV
50mV
3 - 15VDC
50mVp-p
200 - 240VAC 50Hz~ (or on request)
>0.95
78%
Variable speed thermally control fan (1/3 to full speed)
Overload, Over Temperature, Short Circuit Protectionand Output Over Voltage Protection
Design & Manufacture to comply with CE Standard
Red color overload LED indicator
Main Case: 220x89x225 mm 8.7x3.5x8.9 inch
7% fsd
Analog
3.5 kgs 7.7 lbs
2U 19inch Rack Mount, powder coated galvanized steel casing,anodized aluminum front panel and handles
Fixed 13.8VDC
This series of , 19-inch rack mount, high current, regulated switching mode power supplies are built with, Over Voltage Protection for safe-guarding voltage sensitive load. They are suitable for applications that require clean, stable, DC power source such as in telecommunications, audio and digita systems,transceivers and amateur radios. The active Power Factor Correction (PFC) maximizes the main's available real power and minimizes harmonics back to the mains thus beneficial for other AC equipments in the cabinet rack. The high efficiency of this switching power supply cuts the running cost.The high grade Screw On output terminals are on the back panel of the casing while the power on off switch and the red LED overload indicator is at the front panel.The variable speed thermostatic control 8cm cooling fan ensures quiet operation of the power supply even in medium load condition.The casing is made of powder coated galvanized steel with anodized aluminum front panel and handles.
2U
l
• High RFI stability• Over voltage protection • Current fold back overload protection with red LED
indicator• Short circuit protection• Over temperature cut off protection• High efficiency >78% • Power Factor Correction >0.95• Variable speed thermostatic controlled fan for quiet
operation.• Light weight and small size.• Floating Ground Design
Description Features
LABORATORY GRADE POWER SUPPLYwith C.C. CONTROLSPS - 2210 / 2405 / 2603Laboratory Grade Single Output Switching Mode Power Supply
Specifications
This series of 200Watts LABORATORY GRADE SWITCHING DC POWER SUPPLIES are built with precision coarse and fine output voltage and current limiting controls. The OVP (output over voltage protection) protects voltage sensitive load by instant shutting down the supply when output voltage is in excessive to the set voltage due to line surge or otherwise. Current limiting control with automatic cross over of constant voltage (CV) and constant current (CC) mode makes this series ideal for R&D work in laboratory situations.
•••••••••
•
200 Watts output powerCoarse and Fine Voltage / Current controlsAuto-cross over CV and CCLED indicators for CV and CC modeLow ripple and noiseExcellent load and line regulationThermostat control fan cooling3½ digit displays of voltmeter and ammeterOVP, Overload, Short circuit and Over temperatureprotectionsOutput ON-OFF push button
Description Features
Output Voltage
Output Voltage Control
Rated Output Current
Output Current Control
Ripple & Noise (peak-peak)
Load Regulation (0-100% load)
Line Regulation (±5% variation)
Input Voltage
Meter Type
Volt. Meter Range
Curr. Meter Range
Meter's Accuracy
Cooling System
Protection Devices
Approvals
Dimensions (WxHxD)
Weight
Models SPS - 2210
1 - 20VDC
0 - 10A
≤300mV
SPS - 2405
1 - 40VDC
0 - 5A
≤220mV
SPS - 2603
1 - 60VDC
0 - 3.3A
≤150mV
Digital LED
3½ digit
3½ digit
±1% +5 counts
Fine & Coarse Adjust
Fine & Coarse Adjust
≤30mVp-p
≤10mV
90 - 265VAC 50/60Hz~
Thermostatic Control Fan
Over Voltage, Short Circuit, Over Temperature
CE EMC: EN 55011 LVD: EN 61010
205x115x275 mm 8x4.5x10.8 inch
3 kgs 6.6 lbs
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE