Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Sign Type
Ix-6a Individual Letters
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Notes
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
01.31.18 Review
KNIGHT CANCER INSTITUTEKNIGHT CANCER INSTITUTE
ELECTRICAL FEED:Custom fabricate aluminum raceway with weather tight access panels to support necessary transformers and painted to match - dark gray. Use GTO sleeving for power supply conduit.
INDIVIDUAL LETTERS:Colite LP4 Face Lit Letters (or equal) with silver metallic translucent vinyl over white acrylic faces and painted opaque returns. Sign appears silver metallic during the day and white faces at night when lighted. Letters are mounted to the aluminum frame using threaded fasteners, drill and tap method.FONT: Myriad SemiBold Condensed. All capital letters.
ALUMINUM FRAME:Cutout 1/4" aluminum plate frame with bottom flange break-formed for attachment to U-channel and painted to match - silver metallic and dark gray. 3/8" x 1 1/4" aluminum bar mechanically fastened to backer frame using stainless steel fasteners and painted to match metallic silver. Sign must be appearance grade when viewed from behind.
FRONT VIEW
TOP VIEW
SIDE VIEW
LETTERS AND FRAME ASSEMBLED
KNIGHT CANCER INSTITUTE
KNIGHT CANCER INSTITUTEKNIGHT CANCER INSTITUTE
Equal sections of raceway covers(Removeable)
1 1/4"
5"
1/4"
1 3/4"3"
1'-2"
1'-4 1/4"
14'-11"
14'-9 1/2"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
49STANDARDS MANUAL FOR WAYFINDING SIGNAGE
FRONT VIEWSIDE VIEW
������
�����������������������
Ix-6b INDIVIDUAL LETTERSScale: 1/4” = 1’-0“ on an 11” x 17” sheet
INTERNALLY ILLUMINATED INDIVIDUAL LETTERSThe total area of the sign equals 38.9 sq ft
FONT:Myriad SemiBold Condensed.All capital letters.
SERA & Fabricator to verify dimensions and location prior to fabrication and installation.
Letter Detail
6'-5 1/8"
WEST ELEVATION A317:
29'-8"
1'-6 1/2"1'-3 3/4" 1'-3 3/4"
50STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Ix-6b INDIVIDUAL LETTERS - DETAILScale: 1/2” = 1’-0“ on an 11” x 17” sheet
INDIVIDUAL LETTERS:Colite LP4 Face Lit Letters (or equal) with metallic silver translucent vinyl over white acrylic faces and painted opaque returns. Sign appears metallic silver during the day and white faces at night when lighted. Letters are mounted to the aluminum frame using threaded fasteners, drill and tap method.
ELECTRICAL FEED:Custom fabricate aluminum raceway with weather tight access panels to support necessary transformers and painted to match - dark gray. Use GTO sleeving for power supply conduit.
ALUMINUM FRAME:Cutout 1/4" aluminum plate frame with bottom flange break-formed for attachment to U-channel and painted to match - metallic silver and dark gray. 3/8" x 1 1/4" aluminum bar mechanically fastened to backer frame using stainless steel fasteners and painted to match metallic silver.
FRONT VIEWSIDE VIEW
LETTERS AND FRAME ASSEMBLED
TOP VIEW
1 3/16"
1/4"
1'-6 1/2"
1'-6 1/2"
1'-3 3/4"
1'-3 3/4"
29'- 8"
6 1/4"
6 1/4"
5 1/4"
4'-11 3/4"EQUAL SECTIONS OF RACEWAY COVERS
(removeable)
1 3/16"
6"1/4"
SECTION A
51STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SECTION A
DETAIL:The above detail is for reference only and is not final. Fabricator to engineer letter attachment.
LOOKING SOUTH
5 1/4"
1'-3 3/4"
1'-6 1/2"
6 1/4"
2"
Letters attached to backer using countersunk stainless steel fasteners
LP4 FACE LIT LETTERS BY COLITE:White acrylic with white LED lighting embedded into acrylic
1/4" aluminum backer frame with cutout letter forms with break-formed base at 90° add gussets if necessary. Mount to U-channel using stainless steel mechanical fasteners.
Drill holes for necessary access for power supply at base of letters.
Custom raceway cover using 1/8” thick aluminum panel mounted to backer using L-brackets using countersunk stainless steel fasteners.
3/8" x 1 1/4" aluminum bar mechanically fastened to backer frame using stainless steel fasteners.
ELECTRICAL FEED:Owner is responsible for providing the electrical feed to the to sign. Fabricator to provide shop drawings showing detail of electrical location and specifications. Fabricator to provide final connection.
Custom aluminum fabricated U-channel painted to match canopy rafter. Mechanically fasten to rafter using stainless steel nut and bolt fasteners. Fabricator to field measure canopy rafter for tight fit and match bottom angle.
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-6bIndividual Letters Detail
52STANDARDS MANUAL FOR WAYFINDING SIGNAGE
INDIVIDUAL LETTERS:Colite LP4 Face Lit Letters (or equal) with metallic silver translucent vinyl over white acrylic faces and painted opaque returns. Sign appears metallic silver during the day and white faces at night when lighted. Letters are mounted to the aluminum frame using threaded fasteners, drill and tap method.
ELECTRICAL FEED:Custom fabricate aluminum raceway with weather tight access panels to support necessary transformers and painted to match - dark gray. Use GTO sleeving for power supply conduit.
ALUMINUM FRAME:Cutout 1/4" aluminum plate frame with bottom flange break-formed for attachment to U-channel and painted to match - metallic silver and dark gray. 3/8" x 1 1/4" aluminum bar mechanically fastened to backer frame using stainless steel fasteners and painted to match metallic silver.
FRONT VIEW1/2” = 1’-0”
SIDE VIEW1/2” = 1’-0”
LETTERS AND FRAME ASSEMBLED
TOP VIEW
SIGN: 12
1 3/16"
1/4"
1'-8 1/4"
1'-8"
1'-6"
1'-6"
6 1/4"
6"1/4"
SECTION A
4"
0808
08
12
12
4'-4 3/4"EQUAL SECTIONS OF RACEWAY COVERS
(removable)
22'-0"
1'-9"
21'-6"
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-6bBuilding Name Detail
53STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SECTION ALOOKING SOUTH
1'-6"
1'-8 1/4"
2"
Letters attached to backer using countersunk stainless steel fasteners
LP4 FACE LIT LETTERS BY COLITE:White acrylic with white LED lighting embedded into acrylic
1/4" aluminum backer frame with cutout letter forms with break-formed base at 90° add gussets if necessary. Mount to U-channel using stainless steel mechanical
fasteners.
Drill holes for necessary access for power supply at base of letters.
Custom raceway cover using 1/8” thick aluminum panel mounted to backer using L-brackets using countersunk stainless steel fasteners.
Raceway mechanically fastened to existing canopy. Inset 2 1/2" from front edge.
ELECTRICAL FEED:Owner is responsible for providing the electrical feed to the to sign. Fabricator to provide shop drawings
showing detail of electrical location and specifications. Fabricator to provide final connection.
CANOPY DETAILS:TBD. Architect to supply drawings to awarded fabricator.
10"
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-6bBuilding Name Detail
54STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-7Entrance ID, ProjectingSmall, Illuminated
Exit Only
PPatientDrop-off
FRONT VIEW
ALTERNATE LAYOUTS1/2" = 1'-0"
END VIEW
TOP VIEW
268.5°
267.5°
3'-9"
3'-8"
1'-0" 4"
10"
2'-0 3/4"2'-5 1/2" 9 3/4"
1"
1 1/4"
3'-10 1/2"
5"7"
10"
1'-0"
2'-9"
4" square aluminum tube and mounting plate.
Copy and graphics to be push-through 1/32", 3/8" (th.) translucent white acrylic. Acrylic to be stud mounted to the back of the sign face. Illuminated using white LED's. Transfomers are to be located within the cabinet. Font: Gotham Condensed Medium
Signs are hard-wired, with electrical conduit to run through square aluminum tube frame into the sign cabinet.
05
Top and bottom rules painted to match silver metallic.
08
Main Cabinet and Installation:Aluminum channel frame with aluminum support tubes welded to an aluminum plate. Frame skinned with 1/8" (th.) painted aluminum faces to match silver metallic. Top and bottom skins attached with counter-sunk flush screws to cover hand holes for installation.
08
Face Cabinet (double-sided):1/8" (th.) aluminum faces painted to match blue and bonded to an aluminum tube frame. Faces are fixed in place.
01
08
07
6 1/2"
9 3/8"11 1/4"1'-7" 1'-5 1/2"
7"5"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
55STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-7aEntrance ID, ProjectingSmall, Non-illuminated
Exit Only
PPatientDrop-off
FRONT VIEW
ALTERNATE LAYOUT1/2" = 1'-0"
END VIEW
TOP VIEW
268.5°
267.5°
3'-9"
3'-8"
1'-0" 4"
10"
2'-0 3/4"2'-5 1/2" 9 3/4"
1"
1 1/4"
3'-10 1/2"
5"7"
10"
1'-0"
2'-9"
4" square aluminum tube and mounting plate.
Copy and graphics to be engineer grade reflective vinyl. Font: Gotham Condensed Medium
05
Top and bottom rules painted to match silver metallic.
08
Main Cabinet and Installation:Aluminum channel frame with aluminum support tubes welded to an aluminum plate. Frame skinned with 1/8" (th.) painted aluminum faces to match silver metallic. Top and bottom skins attached with counter-sunk flush screws to cover hand holes for installation.
08
Face Cabinet (double-sided):1/8" (th.) aluminum faces painted to match blue and bonded to an aluminum tube frame. Faces are fixed in place.
01
08
07
11 1/4"1'-7" 1'-5 1/2"
7"5"
6 1/2"
9 3/8"
ParkingElevator
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
56STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-8Entrance ID, Panel
AMBUL ANCE ONLY9'-4"
1'-2 1/2"
1 1/8"
Installation Detail
Side View Front View
10"
1" square aluminum tube frame with an 1/8" (th.) painted aluminum face bonded to frame. Copy and graphics to be opaque vinyl. Sign is mechanically fastened to the wall. Font: Gotham Condensed Medium.
Aluminum angle bracket fastened to the wall.
06
07
07
06
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
57STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-9Individual Letters –Illuminated
3/8" whiteacrylic face
stainless steelcounter sunk screw
.080" thick returns
See scale notes
Exterior Wall
1/8" thickback panel
White LED lights
Section Detail(trim cap)
Dark text on light backgroundLight text on dark background
High bond adhesiveto attach acrylic faceto letter return
Aluminum angle support
MountingHardwareStainless steel
counter sunk screw
3/8" whiteacrylic face
stainless steelcounter sunk screw
.080" thick returns
See scale notes
Exterior Wall
1/8" thickback panel
White LED lights
Section Detail(trimless)
High bond adhesiveto attach acrylic faceto letter return
Aluminum angle support
MountingHardwareStainless steel
counter sunk screw
Individual letters for building façades with dark background. Aluminum channel letters with white acrylic face and LED internal illumination. Letter returns are to be painted to match building facade or background panel color. Trim cap, if used, to be painted white. Interior of letterforms to be painted white or covered with 3M light enhancement film. Font: Gotham Condensed, Medium (or custom layout per project).
Alternate background panel fabricated from 1/8" (th.) aluminum painted to match project-specific custom color (see elevation).
07 Individual letters for building façades with light background. Aluminum channel letters with day/night acrylic faces and LED internal illumination. Letter returns are to be painted to match building facade or background panel color. Trim cap, if used, to be painted dark gray. Interior of letterforms to be painted dark gray or covered with 3M light enhancement film. Font: Gotham Condensed, Medium (or custom layout per project).
12
SCALE NOTE:The sign can be scaled
proportionally to accommodate various installation conditions or
signage codes.
SCALE• Letter height and scale to be determined based on
application and appropriate code requirements. • Channel letters located on the first or second story
of a building are to have 3" returns and trimless construction.
• Channel letters located on the third story or higher may use a low-profile trim cap.
• Jewel trim is not acceptable.
Low-profile trim cap(see scale notes)
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
58STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-9aIndividual Letters –Non-Illuminated
Dark text on light backgroundLight text on dark background
1/4" (th.) painted aluminum letters. flush-mounted to painted backer panel. Attach backer panel to existing masonry structure with studs welded to reverse side of panel, secured with silicone adhesive or other per code.
Side View with PanelSide View without Panel
Letters on a dark background painted to match White. Font: Gotham Condensed, Medium (or custom layout per project).
07 Letters on a light background painted to match Dark Gray. Font: Gotham Condensed, Medium (or custom layout per project).
12Alternate background panel fabricated from 1/8" (th.) aluminum painted to match project-specific custom color (see elevation).
SCALE NOTE:The sign can be scaled
proportionally to accommodate various installation conditions or
signage codes.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
59STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
05.31.12 Design Intent01.31.18 Review
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-10 Offsite Building ID(Vertical)
Family Medicineat Gabriel Park
4411 SW Vermont
TOP VIEW
SIDE VIEW SIDE VIEW(curb side)
FRONT VIEW
3/8" thick clear or whiteacrylic face
Stainless steelcounter sunk screw
.125" thick aluminum returns
1/8" thickback panel
White LED lights
High bond adhesiveto attach acrylic faceto aluminum return
Stainless steelcounter sunk screw
Rabbit notch acrylic to accept aluminum returns
Aluminum angle support
Section DetailAcrylic Face with Aluminum Cabinet
Section Detail
4'-2"
4'-3 3/4"
4'-5 3/4"
9"10"
4 1/2"9"
1'-3"5'-4 1/2"
3"
3'-4 3/4"
3"2"
1'-4"
4"
7'-2 1/2"
2 1/4"
3"
5"
3 1/4"
07
01
07
01
08
08
10
1 1/2"
1/8” thick aluminum fabricated base to have textured painted finish for a faux limestone appearance. Sign attachment, foundation and footing details to be engineered by fabricator.
All aluminum fabricated cabinet core, reveals and internal structure. Exterior surfaces painted to match brushed aluminum.
BODY PANEL1/8” thick aluminum sign face with cut-out/push-through white acrylic letters and numbers. Two-sided
HEADER PANEL3/8” thick acrylic sign face with mask and spray blue background with translucent white vinyl for logo symbol (see section details). Two-sided
Electrical connection to be coordinated by fabricator.
Two-sided, internally illuminated aluminum sign cabinet, fabricated from 1/8" (th.) material. To be illuminated with LED lighting system.
1 1/2"
1 1/2"
11"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
60STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
05.31.12 Design Intent01.31.18 Review
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-10 Layout Options
Clinic Nameat Location
1234 Street Name
PartnerHospital
1234 Street Name
Clinic Nameat Location
1234 Street Name
PartnerHospital
OHSU CLINIC PARTNER CLINICPARTNER HOSPITAL
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
61STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
05.31.12 Design Intent01.31.18 Review
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-10a Offsite Building ID(Horizontal)
Family Medicine at Richmond3930 SE Division Street
SIDE VIEW FRONT VIEW SIDE VIEW(curb side)
TOP VIEW
3/8" thick clear or whiteacrylic face
Stainless steelcounter sunk screw
.125" thick aluminum returns
1/8" thickback panel
White LED lights
High bond adhesiveto attach acrylic faceto aluminum return
Stainless steelcounter sunk screw
Rabbit notch acrylic to accept aluminum returns
Aluminum angle support
Section DetailAcrylic Face with Aluminum Cabinet
Section Detail
1 1/2"
1 1/2"
11"
07
01
07
01
BODY PANEL1/8” thick aluminum sign face with cut-out/push-through white acrylic letters and numbers. Two-sided
HEADER PANEL3/8” thick acrylic sign face with mask and spray blue background with translucent white vinyl for logo symbol (see section details). Two-sided
08
08
10
1/8” thick aluminum fabricated base to have textured painted finish for a faux limestone appearance. Sign attachment, foundation and footing details to be engineered by fabricator.
All aluminum fabricated cabinet core, reveals and internal structure. Exterior surfaces painted to match brushed aluminum.
Electrical connection to be coordinated by fabricator.
Two-sided, internally illuminated aluminum sign cabinet, fabricated from 1/8" (th.) material. To be illuminated with LED lighting system.
6'-6 5/8"
6'-5"
2 1/4"
1 1/2"
1'-3"4'-8"
3"
2'-8"
3"2"
1'-4"
4"
6'-6"
6'-7 1/2"6'-5"
6'-6 5/8"
9"4 1/2"
5"
3 1/4"
2 5/8"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
62STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
05.31.12 Design Intent01.31.18 Review
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-10a Layout Options
Partner Hospital1234 Street Name
Clinic Name at Location1234 Street Name
Clinic Name at Location1234 Street Name
Partner Hospital
OHSU CLINIC PARTNER CLINICPARTNER HOSPITAL
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
63STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
04.10.13 Design Intent04.25.13 Revised05.10.13 Design Submittal05.15.13 Revised Design01.31.18 Revised Logo
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-10c Offsite Building IDCustom
4212 SE Division Street2415 SE 43rd
SIDE VIEW FRONT VIEW
SIDE VIEW(curb side)
TOP VIEW
Electrical connectionto be coordinated by fabricator.
Concrete foundation depth to need of exceed local code.
Break-formed corners
Internal structure
3/8" thick white acrylic facewith masked and sprayed opaque graphics.
Translucent vinyl graphics
3"3"
1'-8 3/4"
01
07
07
08
08 All aluminum fabricated cabinet core, reveals and internal structure. Exterior surfaces painted to match brushed aluminum.
Internal steel structure. Post size and cross members to be engineered by fabricator.
Removable panel to access mounting bolts.
BODY PANEL1/8" thick aluminum sign face with masked and sprayed letters (Message on both sides).
1/8" thick aluminum sign face with masked and sprayed letters (Message on both sides).
Two-sided, internally illuminated aluminum sign cabinet, fabricated from 1/8" (th.) material. To be illuminated with LED lighting system.
6'-6 5/8"
6'-5"
1 1/2"
3"2"
1'-4"
4"
6'-7 1/2"6'-5"
6'-6 5/8"
9"4 1/2"
2 1/2"
6'-2 1/2"
2 1/4"
10 1/8" thick aluminum fabricated base to have textured painted finish for a faux limestone appearance. Sign mounting, foundation and footing details to be engineered by fabricator.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
64STANDARDS MANUAL FOR WAYFINDING SIGNAGE
nts
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-11 Offsite Building ID(Horizontal)
OHSU Clinics
Partner Hospital
TOP VIEW
SIDE VIEW
SIDE VIEW
FRONT VIEW - Layout Option 1
FRONT VIEW - Layout Option 2
Partner HospitalClinic Name
FRONT VIEW - Layout Option 3
Section Detail
Fro
nt
Flex Face Section Detail – Side View (nts)
Cover screwpart #5195
Break-formcover
#10 x 1/2" stainless steelscrew (every 8" – 10" oncenter depending on size of face).
Sign Comp™Bleed Fascia Frame
Part #2092
White LED lights
Mounting hardwareas required
Aluminum tubesupport frame
05.31.12 Design Intent01.31.18 Review
NOT TO SCALE
NOT TO SCALEFABRICATOR TO FIELD VERIFY DIMENSIONS
DO NOT EXCEED MAXIMUM SQ FT FOR ON BUILDING SIGNAGE ACCORDING TO LOCAL CODE
01
08
08
Internally illuminated (LED) sign cabinet with flexible fabric face and aluminum returns and back.Wall-mounted.
Surface applied transparent white vinyl for OHSU logo with opaque blue background.
SCALE NOTE:The sign can be scaled
proportionally to accommodate various installation conditions or
signage codes.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
65STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Ix-11a Offsite Building ID(Vertical)
PartnerHospital
OHSUClinics
TOP VIEW
SIDE VIEW SIDE VIEWFRONT VIEW - Layout Option1 FRONT VIEW - Layout Option 2
Clinic Name
FRONT VIEW - Layout Option 3
Fro
nt
Flex Face Section Detail – Side View (nts)
Cover screwpart #5195
Break-formcover
#10 x 1/2" stainless steelscrew (every 8" – 10" oncenter depending on size of face).
Sign Comp™Bleed Fascia Frame
Part #2092
Section Detail
White LED lights
Mounting hardwareas required
Aluminum tubesupport frame
PartnerHospital
01
08
08
Internally illuminated (LED) sign cabinet with flexible fabric face and aluminum returns and back.Wall-mounted.
Surface applied transparent white vinyl for OHSU logo and text with opaque blue backround.
SCALE NOTE:The sign can be scaled
proportionally to accommodate various installation conditions or
signage codes.
NOT TO SCALEFABRICATOR TO FIELD VERIFY DIMENSIONS
DO NOT EXCEED MAXIMUM SQ FT FOR ON BUILDING SIGNAGE ACCORDING TO LOCAL CODE
NOT TO SCALE
66STANDARDS MANUAL FOR WAYFINDING SIGNAGE
08.30.13 Design Intent10.21.13 Revised
06.27.13 Design Intent10.21.13 Revised01.24.14 Revised01.31.18 Revised
Ix-12a,b,c,dRetrofit Panels
Ix-12a Retrofit Aluminum Panel, IlluminatedCut-out/Push-through copy
Ix-12b Retrofit Acrylic Panel, IlluminatedTranslucent
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
OHSU Clinics
Layouts:
OHSU Clinics
Partner Hospital
Partner Hospital
PartnerHospital
OHSUClinics
PartnerHospital
Clinic Name
Clinic Name
01
07 Push through acrylic logo to match white.
07 Push through acrylic messsaging to match white.Font: Gotham Condensed Medium.
RETROFIT:Replace existing aluminum panel with cut-out push-through acrylic messaging/graphics to match specified annotated sign layout.
Sign dimensions are location specific. See annotated layouts for approximate sizes. Fabricator to field verify before
creating shop drawings.
Acrylic panel painted to match blue.
Messaging knocked out of painted background.Font: Gotham Condensed Medium.
OHSU Clinics
Logo knocked out of painted background.
01
07
07
RETROFIT:Replace existing panel with new acrylic panel to match specified annotated sign layout.
Ix-12d Retrofit Aluminum Panel, Non-illuminatedMask and Spray
Individual painted message panel fabricated from 1/8” (th.) aluminum and internal structure as required to fit existing sign.
Messaging to be mask-and-spray painted to match white.Font: Gotham Condensed Medium.
OHSU Clinics
Logo to be mask-and-spray painted to match white.
01
07
07
RETROFIT:Replace existing sign panel with new painted aluminum panel and mask-and-spray graphics to match specified annotated sign layout.
Individual message panels fabricated from 1/8” (th.) aluminum and internal structure as required to fit existing sign.
Ix-12c Retrofit Aluminum Panel, Non-illuminatedReflective
OHSU Clinics01 Individual painted message panels
fabricated from 1/8” (th.) acrylic and internal structure as requied to fit existing sign.
07 Logo to be surface applied reflective vinyl to match white.
07 Messaging to be surface applied reflective vinyl to match white.Font: Gotham Condensed Medium.
RETROFIT:Replace existing sign panel with new painted aluminum panel and reflective graphics to match specified annotated sign layout.
Applied vinyl divder rule line 08
SCALE NOTE:The sign can be scaled
proportionally to accommodate various installation conditions or
signage codes.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
67STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Kx-1Pedestrian Map Kiosk
INFORMATION
Fabricated aluminum cabinet. Fabricator to field verify all mounting conditions and determine final mounting hardware. Masked and sprayed graphics.
SIDE VIEW
BACK VIEW
FRONT VIEW
TOP VIEW
08 6" round steel post. Wall thickness to be determined by fabricator. Post painted with epoxy primer to preventgalvanic reaction between dissimilar metals.
083" square steel post. Wall thickness to be determined by fabricator. Post painted with
epoxy primer to prevent galvanic reaction between dissimilar metals.
3/16" high pressure laminate panelmap panel mechanically mounted to
sign cabinet with tamper-resistent stainless steel screws.
Internal steel post bolted to footing. External aluminum sleeve secured with counter-sunk screws painted to match post.
Internal steel bracket bolted to footing. External aluminum sleeve secured with
counter-sunk screws painted to match post.
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATORConcrete foundation
cylinder
Galvanized or stainless steel "J" Anchor Bolts
08 Fabricated aluminum panel constructed to support sign cabinet.
Tapered post cap08
01
02
4"1 1/4"
88°
92°
88°
3'-6 1/4"
2'-8 1/2"1/2"
6"2 1/8" 2'-1"
4'-10"
2'-0"
8"
2"
1"
3'-8 1/8"
1 1/2"
eq
3'-3 3/4"
1 1/2"5"
1 1/2"3"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
68STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Kx-2 Pedestrian Map, SmallWall Mounted
INFORMATION
3/16" high pressure laminate panelmap panel mechanically mounted to
sign cabinet with tamper-resistent stainless steel screws.
88°
92°
88°
3'-1/2"
2'-8 1/2"2 1/8" 2'-1"
4'-10"
8"
2"
1"
3'-8 1/8"
1 1/2"
eq
eq
3'-4"
1 1/2"5"
1 1/2"3"
TOP VIEW
SIDE VIEW FRONT VIEW
0102
Fabricated aluminum cabinet. Fabricator to field verify all wall conditions and determine final mounting hardware. Masked and sprayed graphics.
Painted band and return edgeswith surface applied reflective vinyl copy.
01
Fabricated aluminum cabinet. Painted band and return edges.
08
2"
3"
Approximately 2'-0"above grade
WALL MOUNTING BRACKETS AND/OR HARDWARE TO BE
ENGINEERED BY FABRICATOR
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
69STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
09.21.17 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Kx-3Parking KioskOptions
OPENFULL
OPENFULL
PRood FamilyGarage
PCHHGarage
05
0808
Fabricated aluminum cabinet. Fabricator to field verify all mounting conditions and determine final mounting hardware. Masked and sprayed graphics.
OPENFULL
OPENFULL
PRood FamilyGarage
PCHHGarage
Fabricated aluminum cabinet. Fabricator to field verify all mounting conditions and determine final mounting hardware. Masked and sprayed graphics.
Monochrome electronic LED message boards (one on each face)
mounted within sign cabinet. Product specifications TBD.
08
08
08
SIDE VIEW
FRONT VIEW
TOP VIEW
084" steel post. Wall thickness to be determined by fabricator. Post painted with
epoxy primer to prevent galvanic reaction between dissimilar metals.
Internal steel bracket bolted to footing. External aluminum sleeve secured with
counter-sunk screws painted to match post.
Concrete foundation cylinder
Galvanized or stainless steel "J" Anchor Bolts
08 Fabricated aluminum panel constructed to support sign cabinet.
Can we reduce the size of the planter box to accommodate space for the Parking Kiosk?
Fire Hydrant
07Messaging is cutout, pushed-through flush white translucent acrylic copy and
parking symbol circles.
07Messaging is cutout, pushed-through flush white translucent acrylic copy and
parking symbol circles.
Monochrome electronic LED message boards (one on each face)
mounted within sign cabinet. Product specifications TBD.
05
0508
FRONT VIEW
TOP VIEW
084" steel post. Wall thickness to be determined by fabricator. Post painted with
epoxy primer to prevent galvanic reaction between dissimilar metals.
Internal steel bracket bolted to footing. External aluminum sleeve secured with
counter-sunk screws painted to match post.
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR Concrete foundation
cylinder
Galvanized or stainless steel "J" Anchor Bolts
05
OPTION 1 OPTION 2
GVLTT
B1
Q1
TYP.
TYP.
K3
TYP.K3TYP.H2 TYP.K1TYP.B2TYP.H1TYP.Q2TYP.P3TYP.C1TYP.P1TYP.Q4
B1
TYP.
TYP.
TYP.
TYP.
TYP. Q1
P1
C1
P3
Q7
TYP.B1 TYP.Q2TYP.P1 TYP.B1 Q2
GVLTT
B1
Q1
TYP.
TYP.
K3
TYP.H2 TYP.K1TYP.B2TYP.H1TYP.Q2TYP.P3TYP.C1TYP.P1TYP.Q4
B1
TYP.
TYP.
TYP.
TYP.
TYP. Q1
P1
C1
P3
Q7
TYP.B1 TYP.Q2TYP.P1
88°
92°
88°
2 1/8"
4'-10"
2'-0"
2'-8 5/8"
2'-11"
3'-1 1/8"
3"
10"
4"
SIDE VIEW
4"
10"
4'-5 3/16"
2'-1 1/2"
2'-8 1/2"
2'-8 1/2"
2'-2 1/8"
2'-2 1/8"
10"
10"
Proposed Parking Kiosk location
Manholes
Tram Track/Right Turn sign
Light Pole
Utility Vault
EXISTING PLAN RECOMMENDED PLAN
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
70STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
TOP VIEW
SIDE VIEW
AuthorizedPersonnel Only
See Front Security Desk for Entry
Loading Dock8:00am - 4:30pm
For assistanceplease call 503-250-2386
For after hours assistance please call 503-494-7744
For after hours assistance please call 503-494-7744
TOP VIEW
SIDE VIEW
1'-0"
1'-0"
1'-0"
1'-0"
NOTICE PLAQUE:1/8” Painted aluminum plaque with silk-screened copy and graphics.
Nx-1 NOTICE PLAQUEScale: 1 1/2” = 1’-0“ on an 11” x 17” sheet
Nx-1 NOTICE PLAQUEScale: 1/2” = 1’-0“ on an 11” x 17” sheet
AuthorizedPersonnel Only
See Front Security Desk for Entry
Loading Dock8:00am - 4:30pm
For assistanceplease call 503-250-2386
For after hours assistance please call 503-494-7744
AuthorizedPersonnel Only
See Front Security Desk for Entry
Loading Dock8:00am - 4:30pm
For assistanceplease call 503-250-2386
For after hours assistance please call 503-494-7744
1'-0"
1'-0"
1'-0"
1'-0"
5 1/2"
5 1/2"
1 5/8"
1 5/8"
1 1/8"
1 5/8"5/8"
FONT:Gotham Condensed,Medium @ 10% kerning
SMALL FONT:Gotham Condensed,Medium @ 5% kerning
FONT:Gotham Condensed,Medium @ 0% kerning
SMALL FONT:Gotham Condensed,Medium @ 5% kerning
2"
1 5/8"
1 1/8"3/4"
1 5/8"
1 1/8"
Nx-1Notice Plaque
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
71STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent10.21.13 Revised
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-1Garage IDFreestanding, LargeNon-Illuminated
Patients and Visitors park here for:
Hatfield Research Ctr
OHSU Hospital
Sam Jackson Hall
D
Visitor ParkingP
SIDE VIEW FRONT VIEW
Surface applied reflective vinyl 0705
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue
with surface applied reflective vinyl graphics.
0705
TOP VIEW
08
08
DOUBLE-SIDEDFabricated aluminum cabinet.
Fabricated aluminum panel constructed to support sign cabinet.
08 6" round steel post. Wall thickness to be determined by fabricator. Post painted with epoxy primer to preventgalvanic reaction between dissimilar metals.
08 Snap frame extrusion to allow message panel to be changed.
Painted band and return edgeswith surface applied reflective vinyl copy.
01
07
03 Masked and sprayed background field and white border with gold reflective graphics.
01
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATORConcrete foundation
cylinder
Galvanized or stainless steel "J" Anchor Bolts
Metal landscaping trim ring with drain holes.
Recess filled to grade with grey colored gravel.
Tapered post cap08
3'-9 1/2"
3'-2"2 1/2"
6"1/2"
3"
4"1 1/4"
2'-8"
11"
1"1 1/2"
1'-6"
4 3/4"2"
1 1/2"3 5/8"
3 5/8"
3 5/8"
3 5/8"
3 5/8"
6'-10 1/2"
2'-6"
4'-5 1/2"
1 1/4"
1'-11"
6 1/2"
5"
88°
92°
88° 1 1/2"THIS SIDE IS ALWAYSCLOSEST TO ROAD
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
72STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-1aGarage IDFreestanding, LargeIlluminated
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
Visitor ParkingP
FULLOPEN
SIDE VIEW FRONT VIEW
0705
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue
with surface applied reflective vinyl graphics.
0705
TOP VIEW
08
08 Fabricated aluminum panel constructed to support sign cabinet.
Tapered post cap
08 6" round steel post. Wall thickness to be determined by fabricator. Post painted with epoxy primer to preventgalvanic reaction between dissimilar metals.
08 Snap frame extrusion to allow message panel to be changed.
07
Custom LED symbol. Black whennot illuminated. Red LED “X” when illuminated.
01
03
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
DATA SOURCE NOTEOwner to provide hardwire data
connection at sign location.
ALTERNATE DATA SOURCEWireless data connection moduleincorporated into sign cabinet.
Concrete foundation cylinder
Galvanized or stainless steel "J" Anchor Bolts
Metal landscaping trim ring with drain holes.
Recess filled to grade with grey colored gravel.
Cut-out, pushed-through flush white translucent acrylic circle with surface applied translucent graphic.
Cut-out, pushed-through flush white translucent acrylic panel with surface applied translucent graphic.
DOUBLE-SIDEDINTERNALLY ILLUMINATEDFabricated aluminum cabinet. White LEDs to back light 12" circle and triple diamond symbol.
Painted band and return edgeswith surface applied reflective vinyl copy.
Painted band and return edges
Quantity 2 (one for each side)7"H x 18"W x 2.5"deep commercially available TCL LED direct-view display.OPEN (green) FULL (red)
01
11
08
Electrical/data connection to be coordinated by fabricator and owner representative.
3'-9 1/2"
3'-2"2 1/2"
6"1/2"
3"
4"1 1/4"
2'-8"
11"
1"1 1/2"
1'-6"
2"1 1/2"3 5/8"1 3/4"3 5/8"
3 5/8"
3 5/8"6'-10 1/2"
2'-6"
4'-5 1/2"
1 1/4"
1'-11"
6 1/2"
5"
2 3/4"
2 3/4"
88°
92°
88° 1 1/2"
THIS SIDE IS ALWAYSCLOSEST TO ROAD
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
73STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent10.21.13 Revised
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-1bGarage IDFreestanding, LargeIlluminated w/ Display
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
FULLOPEN
DatronicsAF-3200
SIDE VIEW FRONT VIEW
0705
TOP VIEW
08
08 Fabricated aluminum panel constructed to support sign cabinet.
Tapered post cap
08 6" round steel post. Wall thickness to be determined by fabricator. Post painted with epoxy primer to prevent galvanic reaction between dissimilar metals.
086" wide x 4" deep fabricated aluminum support leg with 3" internal steel post. Post
painted with epoxy primer to prevent galvanic reaction between dissimilar metals.
07
Custom LED symbol. Black whennot illuminated. Red LED “X” when illuminated.
01
03
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
DATA SOURCE NOTEOwner to provide hardwire data
connection at sign location.
ALTERNATE DATA SOURCEWireless data connection moduleincorporated into sign cabinet.
Concrete foundation cylinder
Galvanized or stainless steel "J" Anchor Bolts
Metal landscaping trim ring with drain holes.
Recess filled to grade with grey colored gravel.
Cut-out, pushed-through flush white translucent acrylic circle with surface applied translucent graphic.
Cut-out, pushed-through flush white translucent acrylic panel with surface applied translucent graphic.
DOUBLE-SIDEDINTERNALLY ILLUMINATEDFabricated aluminum cabinet. White LEDs to back light 12" circle and triple diamond symbol.
Painted band and return edgeswith surface applied reflective vinyl copy.
Painted band and return edges
Quantity 2 (one for each side)7"H x 18"W x 2.5"deep commercially available TCL LED direct-view display.OPEN (green) FULL (red)
Double-sided 19"H x 34"W x 10" deep (5" deep each) Daktronics AF-3200
8mm pixel amber LED displays.
01
11
Fabricated aluminum cabinet.11
08
Electrical/data connection to be coordinated by fabricator and owner representative.
3'-9 1/2"
3'-2"2 1/2"
6"1/2"
3"
4"1 1/4"
2'-8"
11"
1"1 1/2"
1'-6"
2"1 1/2"3 5/8"1 3/4"3 5/8"
3 5/8"
3 5/8"6'-10 1/2"
2'-6"
4'-5 1/2"
1 1/4"
1'-11"
6 1/2"
5"
3"
3"
10"
88°
92°
88° 1 1/2"THIS SIDE IS ALWAYSCLOSEST TO ROAD
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
74STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-2Garage IDProjectingIlluminated
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
Visitor ParkingP
FRONT VIEW SIDE VIEW
SIDE VIEW FRONT VIEW
TOP VIEW
08
08 Fabricated aluminum panel constructed to support sign cabinet.
08 6" half round aluminum post.
08 Snap frame extrusion to allow message panel to be changed.
Painted band and return edgeswith translucent white copy.
01
07
0301
MOUNTING BRACKET AND ANY ADDITIONALSTRUCTURAL SUPPORT WITHIN THE WALL TO
BE ENGINEERED BY FABRICATOR
DOUBLE-SIDEDFabricated aluminum cabinet.
Tapered post cap080705Translucent graphics
Translucent graphics
3'-5"
3'-2"2 1/2"
88°
92°
3"1/2"
3"
4" 1 1/4"
2'-8"
11"
1"1 1/2"
1'-6"
6'-10 1/2"
Final height tobe determined
4'-5 1/2"
1 1/4"
1'-11"
5 3/8"
2"1 1/2"3 5/8"1 3/4"3 5/8"
3 5/8"
3 5/8"
6 1/2"
5"
1 1/2"
DOUBLE-SIDEDINTERNALLY ILLUMINATEDFabricated cabinet with white LEDs.Panaflex faces for upper cabinet with opaque background and internally illuminated letters and graphics.
Flexface cabinet
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue
with surface applied reflective vinyl graphics.
0705
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
75STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-2b/Px-2cGarage ID, ElectronicProjecting/Wall Mounted
92°
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
FULLOPEN
DatronicsAF-3200
6 1/2"
5"
3"
3"
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
FULLOPEN
DatronicsAF-3200
6 1/2"
Px-2b SIDE VIEW Px-2b FRONT VIEW Px-2c FRONT VIEW
TOP VIEW
08
08 Fabricated aluminum panel constructed to support sign cabinet.
08 6" half round aluminum post.
Painted band and return edgeswith translucent white letters
01
07
0301
MOUNTING BRACKET AND ANY ADDITIONALSTRUCTURAL SUPPORT WITHIN THE WALL TO
BE ENGINEERED BY FABRICATOR
Surface applied translucent graphic.
Px-2c is a single side wall mounted verison of the Px-2b.
DOUBLE-SIDEDINTERNALLY ILLUMINATEDFabricated cabinet with white LEDs.Panaflex faces for upper cabinet with opaque background and internally illuminated letters and graphics.
Fabricated aluminum cabinet
Tapered post cap08
Electrical connection to be coordinated by fabricator and
owner representative.
0705illuminated circle with surface applied translucent graphic.
Flexface cabinet
Fabricated aluminum cabinet
Custom LED symbol. Black whennot illuminated. Red LED “X” when illuminated.
DATA SOURCE NOTEOwner to provide hardwire data
connection at sign location.
ALTERNATE DATA SOURCEWireless data connection moduleincorporated into sign cabinet.
Quantity 2 (one for each side)7"H x 18"W x 2.5"deep commercially available TCL LED direct-view display.OPEN (green) FULL (red)
Double-sided 19"H x 34"W x 10" deep (5" deep each) Daktronics AF-3200
8mm pixel amber LED displays.
3'-5"
3'-2"2 1/2"
88° 88°
92°
3"1/2"
3"
4" 1 1/4"
2'-8"
11"
1"1 1/2"
1'-6"
6'-10 1/2"
Final height tobe determined
4'-5 1/2"
1 1/4"
1'-11"
2"1 1/2"3 5/8"1 3/4"3 5/8"
3 5/8"
3 5/8"
10"
1 1/2"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
76STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent70.08.14 Revised
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-2dGarage IDWall MountedNon-Illuminated
Park here for:
DoernbecherChildren’s Hospital
OHSU Hospital
D
Visitor ParkingP
FRONT VIEW
MOUNTING BRACKET AND ANY ADDITIONALSTRUCTURAL SUPPORT WITHIN THE WALL TO
BE ENGINEERED BY FABRICATOR
0705Reflective graphics
TOP VIEW
SIDE VIEW
08 Fabricated aluminum cabinet. Fabricator to field verify all wall conditions and determine final mounting hardware.
08 Snap frame extrusion to allow message panel to be changed.
Painted band and return edgeswith surface applied reflective vinyl copy.
01
2"
4"
3'-5"
3'-2"2 1/2"
88°
92°
3 1/2"
3"
2'-8"
11"
1"1 1/2"
1'-6"
6'-10 1/2"
Final height tobe determined
4'-5 1/2"
1 1/4"
1'-11"
5 3/8"
2"1 1/2"3 5/8"1 3/4"3 5/8"
3 5/8"
3 5/8"
1 1/2"
Flexface cabinet
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue
with surface applied reflective vinyl graphics.
0705
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
77STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-2eGarage ID, Projecting, Small, Illuminated
Rood FamilyPavilion
P OPENFULL
Center forHealth & Healing
P OPENFULL
ALTERNATE LAYOUT1/2" = 1'-0"
FRONT VIEWEND VIEW
TOP VIEW
3'-9 1/2"
3'-10 1/4"
3'-1 1/2"
1'-7"
1'-3 1/2"
4 1/2"
6"
1'-4"
1'-3"
07
Main Cabinet and Installation:Aluminum channel frame skinned with 1/8" (th.) painted aluminum faces to match silver metallic. Cabinet is mounted flush to the wall. Awarded fabricator to engineer the mounting details. Architect to provide wall cross-sections drawings to awarded fabricator.
08
Quantity 2 (one for each side)7"H x 18"W x 2.5"deep commercially available TCL LED direct-view display.OPEN (green) FULL (red). Displays may sit proud of face up to 1", prefer 1/2".
Lower Face Cabinet (double-sided):Removable 1/8" (th.) aluminum panels installed into a thin retainer system. Painted to match blue (panels and retainers). Retainers on side of sign to be easily removed for access to insert panels. Copy to be push-through 1/32", 3/8" (th.) translucent white acrylic. Acrylic to be stud mounted to the back of the aluminum insert panel. Illuminated using white LED's. Transfomers are to be located within the cabinet. Font: Gotham Condensed Medium
05
Upper Face Cabinet (double-sided):1/8" (th.) aluminum faces painted to match blue and bonded to an aluminum tube frame. Faces are fixed in place. Parking symbol to be push-through 1/32", 3/8" (th.) translucent white acrylic with translucent blue vinyl on first surface. Acrylic to be stud mounted to the back of the sign face. Illuminated using white LED's. Transfomers are to be located within the cabinet.
05
07
08
1'-6"
1/2"
2 1/2"
7"
5"
1'-7"
1'-3 1/2"
Signs are hard-wired, with electrical conduit to run into the sign cabinet.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
78STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent10.21.13 Revised01.31.18 Revised
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-3 Garage IDBulkhead Mounted
SIDE VIEW FRONT VIEW
2"
4"
TOP VIEW
Electrical connection to be coordinated by fabricator and owner representative.
88°
92°
88°
WALL MOUNTING BRACKETS AND/OR HARDWARE TO BE
ENGINEERED BY FABRICATOR
A Park here for:
Emma Jones Hall
07
0301
1'-6" 1'-0"
1"eq
eq
08
translucent circle with surface applied translucent graphic.
0705
6'-7"
6'-3 1/2"
2 1/8"
2'-3"
4"
1'-9 1/2"
1 1/2"
2 1/2"
6"
2 1/8"3 5/8"
4 1/2"INTERNALLY ILLUMINATEDFabricated cabinet with white LEDs.Panaflex faces with opaque background and internally illuminated letters and graphics.
Flexface cabinet
Fabricated aluminum cabinetto form background element.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
79STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-3a Garage IDWall Mounted,Custom Curve
01.31.18 Revised
CPatients and Visitors
Park here for:OHSU Hospital and Sam Jackson Hall
SIDE VIEW FRONT VIEW
TOP VIEW
ALTERNATE LAYOUT
88°88°
1'-6" 1'-0"
1"eq
eq
Surface applied white reflective circle with translucent parking blue field with cut out letter.
Surface applied white reflective graphics.07
0705
C Permit Parking Only
07
03 Masked and sprayed background field and white border with gold reflective graphics.
01
1/8” thick painted aluminum panel.
01
MOUNTING TO BEENGINEERED BY FABRICATOR
CUSTOM CURVED PANEL REQUIRED.FABRICATOR TO FIELD VERIFY CURVE DIMENSIONS.
Masked and sprayed graphics
01
08
07
6'-3 1/2"
2 1/8"
1'-9 1/2"
9"
3 5/8"
4 1/2"
3 5/8"
3 3/4"2 7/8"2 5/8"1 3/4"2 5/8"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
80STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-4Garage IDFreestanding, Small
APark here for:
Emma Jones Hall
Visitor ParkingP
APark here for:
Emma Jones Hall
Visitor ParkingP
SIDE VIEW
BACK VIEW
0705
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue
with surface applied reflective vinyl graphics.
07
07
03
05
TOP VIEW
08
08
DOUBLE-SIDEDFabricated aluminum cabinet.
Fabricated aluminum panel constructed to support sign cabinet.
Masked and sprayed background field and white border with gold reflective graphics.
08 6" round steel post. Wall thickness to be determined by fabricator. Post painted with epoxy primer to preventgalvanic reaction between dissimilar metals.
083" square steel post. Wall thickness to be determined by fabricator. Post painted with
epoxy primer to prevent galvanic reaction between dissimilar metals.
08 Snap frame extrusion to allow message panel to be changed.
Painted band and return edgeswith surface applied reflective vinyl copy.
01
01
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
Metal landscaping trim ring with
drain holes.
Recess filled to grade with grey colored gravel.
Tapered post cap08Surface applied reflective vinyl
FRONT VIEW
Concrete foundation cylinder
Galvanized or stainless steel "J" Anchor Bolts
3'-9 1/2"
5'-6"
3'-2"
3'-1"
1 1/4"
1'-11"
2 1/2"
1'-3 1/2"
1'-6" 1'-0"
1"2"
3 3/4"2"
1 1/2"3"
3"
6"1/2"
1'-10"
4"1 1/4"
6 1/2"
5"
88°
92°
88° 1 1/2"
THIS SIDE IS ALWAYSCLOSEST TO ROAD
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
81STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-5Staff Lot IDFreestanding
TOP VIEW
10
07
07
Reflective vinylgraphics
Reflectivevinyl graphics
REMOVEABLE 1/8" thick Sintra (PVC board) painted parking blue with surface
applied reflective vinyl graphics.
0705
StaffParking
SIDE VIEW
BACK VIEW
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
FRONT VIEW
083" square aluminum post. Wall thickness to be
determined by fabricator.
Concrete foundation cylinder
1/8" thick aluminum plate
2'-2"
2 3/8"
1'-2 1/2"
7/8"2 1/2"
8 3/8"
12
3'-3"
2'-6 1/2"
1'-8"
5 1/8"
4"1 3/4"
08 Snap frame extrusion to allow message panel to be changed.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
82STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Px-6a GARAGE EXIT IDENTIFI-ER, WALL-MOUNTED, ILLUMI-NATEDPainted aluminum sign cabinet with cut-out push-through white acrylic circle and applied red translucent vinyl.
Px-6 GARAGE ENTRANCE IDENTIFIER, WALL-MOUNTED, ILLUMINATEDPainted aluminum sign cabinet with cut-out push-through white acrylic letters. Painted PVC clearance bar with applied vinyl graphics and lettering. Clearance bar to have end caps.
EXIT ONLY
0'-0" Clearance
ENTR ANCE
8'-0"
1'-4 3/4"
8'-0"
1'-4 3/4" P P
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-6/Px-6aGarage Entrance ID
Wall Mounted
Px-6dGarage Clearance Bar
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
83STANDARDS MANUAL FOR WAYFINDING SIGNAGE
ENTRANCEP P??'-??" Clearance
NOT AN EXIT
FRONT VIEW
BACK VIEW
SIDE VIEW
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-6bGarage Entrance IDClearance Bar, IlluminatedDouble-sided
4"
6"
2 1/4"6"
SIGN CABINET:Internally-illumined, double-sided painted aluminum cabinet fabricated from 1/8" (th) aluminum. Copy and graphics to be push-through 1/32", 3/8" (th.) translucent white acrylic. Acrylic to be stud mounted to the back of the sign face. Illuminated using white LED's. Transfomers are to be located within the cabinet. Center copy vertically on sign face and horizontally between parking symbols. Font: Gotham Condensed Medium
05
CLEARANCE PANEL AND CHAINS:Painted aluminum cabinet with mask and spray graphics. Chain height and number to be coordinated with parking consultant.Font: Gotham Condensed Medium
00
11
INSTALLATION:2 1/4" sq. aluminum tube with welded mounting plate mechanically fastened to building. Engineering to be provided by awarded fabricator. Electrical feed to run through one of the support tubes.
08
06
07
08
TBD, based on clearance height.
1'-6" 1'-0" 9"
7" 4"
8'-6"1'-6"
5'-6"
Signs are hard-wired, with electrical conduit to run through square aluminum tube frame into the sign cabinet.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
84STANDARDS MANUAL FOR WAYFINDING SIGNAGE
EXIT ONLY
LEFT TURN ONLY
6"
2 1/4"6"
SIGN CABINET:Internally-illumined, double-sided painted aluminum cabinet fabricated from 1/8" (th) aluminum. Copy and graphics to be push-through 1/32", 3/8" (th.) translucent white acrylic. Acrylic to be stud mounted to the back of the sign face. Illuminated using white LED's. Transfomers are to be located within the cabinet. Center copy vertically on sign face and horizontally between parking symbols. Font: Gotham Condensed Medium
05
INSTALLATION:2 1/4" sq. aluminum tube with welded mounting plate mechanically fastened to building. Engineering to be provided by awarded fabricator. Electrical feed to run through one of the support tubes.
08
06
07
08
TBD, based on clearance height.
1'-6" 1'-0" 9"
9"
8'-6"1'-6"
FRONT VIEW
BACK VIEW
SIDE VIEW
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
06.27.13 Design Intent07.29.16 For Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-6cGarage Exit IDIlluminated, Double-sided
1'-6"
8'-6"3" 3"
Signs are hard-wired, with electrical conduit to run through square aluminum tube frame into the sign cabinet.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
85STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-6dGarage Clearance Bar
SIDE VIEW FRONT VIEW
7'-0" Clearance
7'-0" Clearance – 8'-2" Accessible Clearance
4"
CLEARANCE PANEL AND CHAINS:Painted aluminum cabinet with mask and spray graphics. Chain height and number to be coordinated with parking consultant.Font: Gotham Condensed Medium.
Sign to be attached to entrance drive portal. Portal design to be prepared by SRG and will extend over the drive aisle. Fabricator to engineer attachment of clearance bar to entrance drive portal sign.
00
11
7"
9'-1"
SIDE VIEW FRONT VIEW
4"
CLEARANCE PANEL AND CHAINS:Painted aluminum cabinet with mask and spray graphics. Chain height and number to be coordinated with parking consultant.Font: Gotham Condensed Medium.
Fabricator to engineer attachment.
00
11
7"
9'-1"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
86STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Px-6e GARAGE ENTRANCE ID w/ CLEARANCE BARScale: 1/2” = 1’-0“ on an 11” x 17” sheet
Px-6f GARAGE EXIT IDENTIFIERScale: 1/2” = 1’-0“ on an 11” x 17” sheet
Parking Entrance PP Exit Only
NOT AN EXIT Left Turn Only
7'-0" Clearance – 8'-2" Accessible Clearance
13'-7"
1'-6"
10'-0"
1'-6"
Distance to bedeterminedby Owner
Distance to bedeterminedby Owner
8 1/2"1'-2"
4"
8 1/2"1'-2"
2'-4" 2'-4"2'-3"2'-3"
13'-7"
1'-6" 8 1/2"1'-2"
2'-3"2'-3"
4"
6" 2'-3" 9'-1"
9 1/4"
11 3/8"
8 3/8"
10'-0"
1'-6"
2'-4" 5'-4"6"
SYMBOLS:Cut-out pushed-through white acrylic circle and dash with surface applied red translucent vinyl.
SYMBOLS:Cut-out pushed-through white acrylic with blue translucent vinyl.
SIGN CABINET:Painted aluminum cabinet with cut-out pushed-through white acrylic letters. Center copy vertically on sign face and horizontally between do not enter symbols.
FONT:Gotham Condensed, Medium.Optical kerning set @ 50%
SIGN CABINET:Painted aluminum cabinet with cut-out pushed-through white acrylic letters and circle P symbol. Center copy vertically on sign face and horizontally between parking symbols.
MOUNTING:Mounting height to be determined on site. Owner to verify clearance.
MOUNTING:Mounting height to be determined on site. Owner to verify clearance.
BACK VIEW BACK VIEW
SIGN CABINET FONT:Gotham Condensed, Medium.Optical kerning set @ 50%
SIGN CABINET FONT:Gotham Condensed, Medium.Optical kerning set @ 50%ALL CAPITAL LETTERS.
CLEARANCE CHAINS:To be coordinated with parking consultant.
CLEARANCE BAR FONT:Gotham Condensed, Medium.Optical kerning set @ 25%
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-6e/Px-6fGarage Entrance/Exit ID
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
87STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Px-7a GARAGE EXIT IDENTIFIER, WALL-MOUNTED, NON-ILLUMINATEDPainted aluminum sign cabinet with reflective vinyl letters and graphics.
Px-7 GARAGE ENTRANCE IDENTIFIER, WALL-MOUNTED, NON-ILLUMINATEDPainted aluminum sign cabinet with reflective vinyl letters and graphics. Painted PVC clearance bar with applied vinyl graphics and lettering. Clearance bar to have end caps.
CUSTOM MOUNTING CONDITIONSClean and repaint existing overhead steel structure OHSU parking blue. Mount Px-7 and Px7a to horizontal cross member.
E X I T O N LY
0'-0" Clearance
E N T R A N C E
8'-0"
1'-4 3/4"
8'-0"
1'-4 3/4"
SIDE VIEW
SIDE VIEW
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-7Garage Entrance IDWall Mounted
RENDERING OF LOCATION 1
RENDERING OF LOCATION 2
0'-0" Clearance
E N T R A N C EE X I T O N LY
0'-0" Clearance
E N T R A N C EE X I T O N LY
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
88STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
SIDE VIEW
3/4" = 1'-0"(on an 11 x 17 sheet)
Parking
Parking
9 1/8"2'-1"
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-8/8a/8.2Overhead Guide, Long
SIDE VIEW
6 1/2"1'-0"
5'-6"
6 1/2"1'-0"
5'-6"
Px-8 Suspended Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-8.2 Suspended, double-sided Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-8a Beam Mounted Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Aluminum frame is mechanically fastened to ceiling.
NOTE: Fabricator to verify ceiling heights prior to construction to maintain posted clearance height and determine frame tube lengths.
FONT:Gotham Condensed Mediumkerning set at 50%.
FONT:Gotham Condensed Mediumkerning set at 25%.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
89STANDARDS MANUAL FOR WAYFINDING SIGNAGE
ALTERNATE LAYOUTS
3/4" = 1'-0"(on an 11 x 17 sheet)
Parking Exit
Park ExitExpress LaneCredit Cards, Permits, Validations
Level
3"
3 1/4"
3 1/4"
P6Level
P6Level
P 1
Elevators Valet Pickup
Right Turn Only Level P3Patient & Patient Visitor Parking
3"
3 1/4"
3 1/4"
Right TurnOnly
ExitBadge AccessOnly
Exit/Parking
Level P5Permit Parking OnlyP5Level P2
Guest House Parking OnlyP2
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-8/8a/8.2Layout Options
1'-5"
2'-1"
4 1/2"
2"1"
1"
5 3/8"
1'-5 5/8" 2'-8"
5'-6"
1'-1 1/4"
1"
5 3/8"
1'-5 5/8" 2'-8"
3 1/4"
1"
5 3/8"
1'-5 5/8" 2'-8"
Layouts for parking levels
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
90STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
SIDE VIEW
3/4" = 1'-0"(on an 11 x 17 sheet)
Parking7 5/8"
1'-8 3/4"
Right Turn Only11"
SIDE VIEW
10"
4'-7"
10"
4'-7"
5 1/2"
Px-8b Suspended Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-8b.2 Suspended, double-sided
Painted 1/8” aluminum panel with reflective vinyl
letters and graphics.
Px-8c Beam Mounted Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Aluminum frame is mechanically fastened to ceiling.
Aluminum frame is mechanically fastened to ceiling through 4" layer of insulation.
NOTE: Fabricator to verify ceiling heights prior to construction to maintain posted clearance height and determine frame tube lengths.
FONT:Gotham Condensed Mediumkerning set at 50%.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-8b/8c/8b.2Overhead Guide, Long
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
91STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
SIDE VIEW
ALTERNATE LAYOUTS
3/4" = 1'-0"(on an 11 x 17 sheet)
Parking
Parking
Exit No Exit
1'-0"
1'-0"
4'-7"
6 1/2"
1'-0"
4'-7"
9 1/8"
Px-9 Suspended Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-9a Beam Mounted Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Aluminum frame is mechanically fastened to ceiling.
NOTE: Fabricator to verify ceiling heights prior to construction to maintain posted clearance height and determine frame tube lengths.
SIDE VIEW
Px-9.2 Suspended, double-sided Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
FONT:Gotham Condensed Mediumkerning set at 50%.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-9/9a/9.2Overhead Guide, Short
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
92STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
SIDE VIEW
ALTERNATE LAYOUTS
3/4" = 1'-0"(on an 11 x 17 sheet)
Exit
No Exit
Parking10"
7 5/8"
SIDE VIEW
10"
3'-10"
10"
3'-10"
5 1/2"
Px-9b Suspended Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-9b.2 Suspended, double-sided Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-9c Beam Mounted Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Aluminum frame is mechanically fastened to ceiling.
Aluminum frame is mechanically fastened to ceiling through 4" layer of insulation.
NOTE: Fabricator to verify ceiling heights prior to construction to maintain posted clearance height and determine frame tube lengths.FONT:
Gotham Condensed Mediumkerning set at 50%.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-9b/9c/9b.2Overhead Guide, Short
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
93STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
SIDE VIEW
3/4" = 1'-0"(on an 11 x 17 sheet)
Two-way Traffic
Two-way Traffic
Two-way Traffic
4 5/8"
9 3/8"
1'-2 3/4"
FONT:Gotham Condensed Mediumkerning set at 25%.
4'-7"
1'-0"
4'-7"
1'-0"
Px-10 OVERHEAD TWO WAY TRAFFIC, SUSPENDEDPainted 1/8” aluminum panel with black reflective vinyl letters and graphics.
Px-10a OVERHEAD TWO WAY TRAFFIC, BEAM MOUNTEDPainted 1/8” aluminum panel with black reflective vinyl letters and graphics.
Back-view
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-10, Px-10aOverhead Two Way TrafficLong
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
94STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-11, Px-11aOverhead ClearanceSuspended/Beam Mounted
0'-0" Clearance
Caution: Clearance Change
Caution: Clearance Change
0'-0" Clearance
4'-7"
1'-0"
4'-7"
1'-0"
4"
Px-11 OVERHEAD CLEARANCE, SUSPENDED
Painted 1/8” aluminum panel with black reflective vinyl letters and graphics. Painted PVC clearance bar with applied vinyl graphics and lettering. Clearance bar to have end caps.
Px-11a OVERHEAD CLEARANCE, BEAM MOUNTED
Painted 1/8” aluminum panel with black reflective vinyl letters and graphics. Painted PVC clearance bar with applied vinyl graphics and lettering. Clearance bar to have end caps.
Aluminum frame is mechanically fastened to ceiling.
SIDE VIEW
SIDE VIEW
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
95STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Px-11b OVERHEAD CLEARANCEBEAM MOUNTED
Painted 1/8” aluminum panel with black reflective vinyl letters and graphics. Painted PVC clearance bar with applied vinyl graphics and lettering. Clearance bar to have end caps.
Aluminum frame is mechanically fastened to ceiling.
7'-0" Clearance
E N T R A N C E4'-7"
1'-0"
SIDE VIEW
6"
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-11bOverhead Entrance/Clearance, Beam Mounted
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
96STANDARDS MANUAL FOR WAYFINDING SIGNAGE
ALTERNATE LAYOUTS
Elevators Elevators
SIDE VIEW
Elevators
3'-10"
10"
Px-12 OVERHEAD, PEDESTRIAN, SUSPENDEDPainted 1/8” aluminum panel with reflective vinyl letters and graphics.
Px-12a OVERHEAD, PEDESTRIAN, BEAM MOUNTEDPainted 1/8” aluminum panel with reflective vinyl letters and graphics.
SIDE VIEW
3'-10"
10" ElevatorsAluminum frame is mechanically fastened to ceiling.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-12, Px-12aOverhead Pedestrian
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
97STANDARDS MANUAL FOR WAYFINDING SIGNAGE
SIDE VIEW
ALTERNATE LAYOUTS
3'-10"
10" Elevators
Elevators Elevators Patient ParkingValet Parking
7"
8 1/4"4"
1’-0”
10 3/8"
3"
4 3/4"
Px-12b Painted 1/8” aluminum panel with reflective vinyl letters and graphics.
Aluminum frame is mechanically fastened to ceiling.
4" 7"7"
3"
3"
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-12bOverhead Pedestrian
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
98STANDARDS MANUAL FOR WAYFINDING SIGNAGE
PORTLANDIA
PARKING GARAGE
ROOD PAVILION PARKING ONLY
STAFF PARKING ONLY
PATIENT & VISITOR PARKING
PORTLANDIA
PARKING GARAGE
PORTLANDIA
PARKING GARAGE
2 3/8"
1 1/2"2 3/4"
1 5/8"
3 7/8"3'-8"
4'-6"
4'-1 5/8"
2"
3 3/4" 3 3/8"
10 1/8"
1"
5 1/2"2 1/2"
4 1/2"
5 1/4"
1"
Px-14 ELEVATOR LEVEL IDENTIFIERSign is fabricated from two 1/8” (th.) painted aluminum panels. Graphics in the upper portion and lower black band are applied reflective vinyl with digitally printed graphics. Use exterior UV inks and graffiti resistant over-laminate. Silver rule lines are exposed background color. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Medium.
TOP VIEW
ALTERNATE COLOR LAYOUT
ALTERNATE MESSAGE LAYOUTS
FONT:Gotham Condensed Medium.
FONT:Gotham Condensed Mediumkerning set @ 50%.
3/4" = 1'-0"(on an 11 x 17 sheet)
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-14 Elevator Level ID
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
99STANDARDS MANUAL FOR WAYFINDING SIGNAGE
GARAGE C
GARAGE A GARAGE B
GARAGE B GARAGE D GARAGE E
GARAGE F GARAGE B
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-14Elevator Level IDLayouts
LIGHTHOUSE
BRIDGE COAST
COAST
FALLS COAST
CRATER LAKE ROSE GARDEN
nts
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
100STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-14aElevator Level ID, Small
P1LEVEL
LIGHTHOUSE
GARAGE C
3'-4 1/2"
2'-9"
Sign is fabricated from two 1/8” (th.) painted aluminum panels. Graphics in the upper portion and lower black band are applied reflective vinyl with digitally printed graphics. Use exterior UV inks and graffiti resistant over-laminate. Silver rule lines are exposed background color. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Medium.
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
101STANDARDS MANUAL FOR WAYFINDING SIGNAGE
LIGHTHOUSE
Center for Health& Healing Garage
P1LEVEL
BUILDING
2'-9"
Sign is fabricated from two 1/8” (th.) painted aluminum panels. Entire face of sign is applied 3M™ 7930 Engineer Grade Prismatic reflective vinyl with digitally printed graphics to match specified color, Black and White. Use exterior UV inks and 3M™ 1170 Protective Overlay Film. Silver rule lines are exposed background color. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Medium.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-14bElevator Level ID, Small(No Icon)
3'-9"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
102STANDARDS MANUAL FOR WAYFINDING SIGNAGE
LIGHTHOUSE
GARAGE C
LIGHTHOUSE
GARAGE C
LIGHTHOUSE
GARAGE C
Elevators
Elevators
LIGHTHOUSE
GARAGE C
Stairs
Stairs
LIGHTHOUSE
GARAGE C
Elevators
Valet Pickup
LIGHTHOUSE
GARAGE C
Doernbecher
LIGHTHOUSE
GARAGE C
EMERGENCY
Elevators
LIGHTHOUSE
GARAGE C
Valet Pickupon this Level
1'-10"
1'-10"
2'-4 1/2"
2'-9"
6'-8"
4'
Minimum mounting height
Maximum mounting height
Px-15b LEVEL IDENTIFIER - GUIDE (TWO LINES)
Px-15 LEVEL IDENTIFIERSign is fabricated from an 1/8” (th.) painted aluminum panel. Graphics in the upper portion of the sign are applied reflective vinyl with digitally printed graphics. Use exterior UV inks and graffiti resistant over-laminate. Footer consists of a painted black background and applied reflective vinyl lettering. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Medium.
Px-15a LEVEL IDENTIFIER -GUIDE (ONE LINE)Guide information is reflective vinyl with painted background.
Alternate Layout Alternate Layout
Alternate LayoutAlternate Layout Alternate Layout
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-15/15a/15bGarage Level ID
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
103STANDARDS MANUAL FOR WAYFINDING SIGNAGE
BRIDGE COAST
CRATER LAKE ROSE GARDEN
FALLS
LIGHTHOUSE COAST
P1LEVEL
P2LEVEL
P3LEVEL
P5LEVEL
P6LEVEL
P7LEVEL
P8LEVEL
GARAGE C GARAGE B GARAGE DP4LEVEL
GARAGE E
GARAGE A GARAGE B GARAGE F GARAGE F
COAST
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
01.31.18 Review
nts
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-15Garage Level IDLayouts
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
104STANDARDS MANUAL FOR WAYFINDING SIGNAGE
P4ParkingElevator
P2LEVEL
Guest HouseElevator
P2Building 2
Guest HouseElevator
Parking Elevator
Building
Building
Building 2
1'-10"
1'-10"
6'-8"
4'
Minimum mounting height
Maximum mounting height
Px-15d LEVEL IDENTIFIER - NO ICON - TWO LINESSign is fabricated from an 1/8” (th.) painted aluminum panel. Level identification is applied 3M™ 7930 Engineer Grade Prismatic reflective vinyl with digitally printed graphics. Guide information is reflective vinyl with painted background. Use exterior UV inks and 3M™ 1170 Protective Overlay Film. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Medium.
Px-15e LEVEL IDENTIFIER -NO ICON - THREE LINES
Alternate Layouts
LEVEL
LEVELLEVEL
LEVEL
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3/4" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-15d/Px-15eGarage Level ID(No Icon, 2-3 Lines)
2'-5"
2'-3 1/2"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
105STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Skybridge to Sam Jackson, exit on Level 3.
COAST
PHYSICIANS PAVILION
To reach OHSU Hospital, exit on Level 1.
FALLS
GARAGE F
TEALLEVEL P5
YELLOWLEVEL P6
PURPLELEVEL P1
ORANGELEVEL P2
GREENBridge to DoernbecherLEVEL P3
REDLEVEL P4
BLUELEVEL P7
BROWNLEVEL P8
BROWNLEVEL P9
FLOOR 4
FLOOR 3
FLOOR 1
9"
1'-2"
Skybridge to Sam Jackson and OHSU Hospital
FLOOR 2
GARAGE B
TEALLEVEL P5
PURPLELEVEL P1
ORANGELEVEL P2
REDLEVEL P4
GREENLEVEL P3 Valet Pick-up
APCO FullView™ FVS1485(V)Large format printed insert with graphics TBD per project scope.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-16Elevator Directory Level ID
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
106STANDARDS MANUAL FOR WAYFINDING SIGNAGE
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
3" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-16aElevator Directory Level IDLarge
Center for Health & Healing
Building 1
To access Building 1,exit on Floor 1 and
take the visitor elevator.
PURPLELEVEL P1
GREENLEVEL P3
ORANGELEVEL P2 Valet
Lobby & Street AccessFLOOR 1
March Wellness & Fitness CenterFLOOR 2
APCO FullView™ FVS1711(V)Large format printed styrene insert with graphics TBD per project scope.
11 1/2"
1'-5"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
107STANDARDS MANUAL FOR WAYFINDING SIGNAGE
ALTERNATE LAYOUT
ALTERNATE LAYOUTALTERNATE LAYOUT
ALTERNATE LAYOUT
ALTERNATE LAYOUT
ALTERNATE LAYOUT
3/4" = 1'-0"(on an 11 x 17 sheet)
Exit
PARKINGONE WAYTRAFFIC
9 1/8"
PARKINGONE WAYTRAFFIC
PARKING
EXIT
6 1/2"
3 7/8"
3 7/8"
3 7/8"
5 3/4"
3 1/8"
VALETDROP-OFF
FREE PATIENTPARKING
P4Exit
P6- P9Permit Parking
P1-P4Patient & Permit1'-6"
1'-2"
3'-0"
9"
9"
9"
7"
2 1/4"CL
9 1/4"
4 5/8"
3 1/8"1 3/8"3 1/8"
1 7/8"3/8"2"
2 1/4"1"
2 1/4"CL
9 1/4"
2 7/8"
6 1/2"
2 5/8"
Px-17Painted 1/8” aluminum panel with reflective vinyl letters and graphics. Sign panel flush mounted to wall with welded studs and silicone adhesive - no through face, or exposed mounting.
FONT:Gotham Condensed Mediumkerning set at 50%.
FONT:Gotham Condensed Mediumkerning set at 10%. ALL CAPITAL LETTERS.
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
Scale
Notes
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-17Vehicular GuideColumn Mounted
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
108STANDARDS MANUAL FOR WAYFINDING SIGNAGE
OHSU to confirm fabrication materials. Sign installed flush to wall, no through face, or exposed mounting.
FONT:Gotham Condensed Mediumkerning set at 25%.
top view
side view
Pay Stations AreLocated In The Lobby
Take Your TicketWith You
Pay Stations AreLocated In The Lobby
Take Your TicketWith You
1'-6"
2'-0"
8 5/8"
8 1/8"
5 1/2"
3/8"
1'-3"
2 1/8"
1 1/8"
1 1/16"
1 9/16"
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1 1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-18Remember Your Ticket
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
109STANDARDS MANUAL FOR WAYFINDING SIGNAGE
P8 - Permit
P7 - Permit
P6 - Permit
P5 - Permit
P4 - Metered Parking
P3 - Metered Parking
P2 - Patient & Visitor
P1 - Patient & Visitor
FP8 - Permit
P7 - Permit
P6 - Permit
P5 - Permit
P4 - Metered Parking
P3 - Metered Parking
P2 - Patient & Visitor
P1 - Patient & Visitor
F
FP1 - Patient & Visitor
P2 - Patient & Visitor
P3 - Patient & Visitor
P4 - Patient & Visitor
P5 - Patient & Visitor
1/8" thick surfaceapplied vinyl line
TOP VIEW TOP VIEW
Px-20 ELECTRONIC LEVEL SIGNPainted aluminum sign cabinet with cut-out pushed-through acrylic messaging. Sign is internally illuminated with white LED lighting. Sign is single-sided. Ground mounted. Individual electronic displays: Signal-Tech 7"x 18" Seven Segment Display.
ELECTRONIC COUNTER COMPONENTSAll details for required electronic components should
be verified with the parking electronics vendor before final sign fabrication. Back of sign must be
built so that internal components of the sign can be accessed for maintenance.
Px-20a ELECTRONIC LEVEL SIGNPainted aluminum sign cabinet with cut-out pushed-through acrylic messaging. Sign is internally illuminated with white LED lighting. Sign is single-sided. Wall mounted.
SIDE VIEW FRONT VIEW FRONT VIEWSIDE VIEWSIDE VIEW
ALTERNATE LAYOUT
88°
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
Electrical connection to be coordinated by fabricator and owner representative.
Mounting height to bedetermined
Final locations and wallconditions to be determined
Client
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
01.31.18 Review
Sign Type
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Px-20/Px-20aElectronic Sign
7"
4'-3"
3'-10 1/2" 4 1/2"2 3/4"
1'-0 3/4"
7"
1 5/8"
9 5/8"
1 5/8"2"
2 3/4"
2" 1"
eq6"
eq
6'-2 1/2"
8"
7'-1 1/2"
1'-5"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
110STANDARDS MANUAL FOR WAYFINDING SIGNAGE
This drawing is design-intent only.Fabricator is responsible for fabricationand overall level of quality. Any changesin design, materials, fabrication methodor other details must be approved byCorbin Design and Oregon Health & Science University.
1/2" = 1'-0"(on an 11 x 17 sheet)
Scale
Notes
Sign Type
Client
109 East Front Suite 304Traverse City, MI 49684
231 947.1236
Date Description
Rx-1/Rx-3Regulatory,Wall Mounted/Post Mounted
TOP VIEW
1'-6"
4"
4"1/2"
VanAccessible
AccessibleParking
ReservedParking
SPECIAL RESERVATIONREQUIRED AT ALL TIMES
Unauthorized vehicles willbe ticketed and towed at
owners expense.
ReservedParking
SPACE #14KSPECIAL PERMIT
REQUIRED AT ALL TIMES
Unauthorized vehicles will be ticketed and towed at
owners expense.
ReservedParking
EmergencyParking Only
ReservedParking
PhysiciansOnly
ReservedParking
PhysiciansOnly
ReservedParking
PhysiciansOnly
No Entry Patient drop-off only, please.
WheelchairUser Only
AccessibleParkingNo Parking
P
FOUNDATION AND MOUNTING TOBE ENGINEERED BY FABRICATOR
Rx-1 FRONT VIEW
ALTERNATE LAYOUTS
Rx-1 SIDE VIEW Rx-3 FRONT VIEW Rx-3 BACK VIEW Rx-3 SIDE VIEW
Concrete foundation cylinder
1/8" thick aluminum panel with engineer grade reflective white background. Mounted to wall with bolts through sign face.
Surface appled opaque vinyl graphics.
PANEL ATTACHMENTPanels bonded to painted aluminum “L” channel brackets. Brackets are attached to post with round head screws.
082" square aluminum post
MOUNTING TO BEENGINEERED BY FABRICATOR
1'-0"
1'-6"
05
07
08
08
3 1/8"2"
1 3/8"2"
3 3/8"
1/4" rule line
1 3/8"3/4"3/4"
1/8” thick painted aluminum panel.
Approximatley 4'-6"above grade
6'-0"
08.30.13 Design Intent10.21.13 Revised05.03.18 Branding Update
111STANDARDS MANUAL FOR WAYFINDING SIGNAGE