Upload
owca-owcelis
View
285
Download
0
Embed Size (px)
Citation preview
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 1/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 2/365
Order Information
Address: Kathrein Inc., Scala DivisionP.O. Box 4580
Medford, OR 97501USA
Phone: (541) 779-6500
Fax: (800) 850-1116 (toll-free in USA and Canada only)(541) 779-3991
Email: [email protected]
Web site: www.kathrein-scala.com
Copyright 2011 by Kathrein Inc., Scala Division. All rights reserved.The contents of this book may not be reproduced in whole or in part in any manner without the expressed approval
of Kathrein Inc., Scala Division.
ISO 9001 Quality and ISO 14001 Environmental Management
Kathrein-Scala is an ISO 9001 and ISO 14001 certified companyand is in voluntary compliance with EU Directive 2002-95-EC for
Reduction of Hazardous Substances (RoHS).
Kathrein Inc., Scala Division, Kathrein, Scala, Paraflector, Miniflector, and Paraslot are registered trademarks of Kathrein Inc., Scala Division.WiMAX is a trademark of the WiMAX Forum.
Smith Chart is a registered trademark of Analog Instruments Company used with permission.
Catalogs are available for the following:
30–512 MHz700–3800 MHz
A CD-ROM is also available containing both catalogs plusadditional technical information.
All specifications are subject to change without notice.The latest specifications are available at www.kathrein-scala.com.
Website
Kathrein-Scala’s Website may be found at www.kathrein-scala.com . The Website features complete product
data sheets in viewable and downloadable Acrobat files, news and general information about Kathrein,information on new additions to our product line, and more. Sign up for Kathrein-Scala’s e-mail news bulletin,request catalogs and CD-ROM’s, and inquire about special or custom products. Check the Website for the most
up-to-date specifications and radiation patterns.
C32
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 3/365
Kathrein Inc., Scala Division, is a leading manufacturerof professional antenna and filter systems for
communications and broadcasting, serving commercialand governmental markets throughout North Americaand the Caribbean region. The company is a member
of the Kathrein Group, the world’s oldest and largestsource of professional antenna and filter products for
communication and broadcast applications.
Kathrein-Scala is ISO9001-certified for quality standardsand systems and ISO14001-certified for environmentalstandards and is in voluntary compliance with EU
Directive 2002-95-EC for Reduction of HazardousSubstances (RoHS). The company has been producing
lead-free products since May of 2006.
Our product groups include professional antennas, RFfilters, and accessories for a wide range of applications,including:
● Wireless mobile communications● TV and FM Broadcasting● Wireless Internet● Point-to-point and point-to-multipoint data and
control networks● Land-mobile radio communications systems of all
types
This product catalog for 700 – 3800 MHz contains thelatest in antennas and accessories to accommodate
the needs of the rapidly advancing telecommunicationsindustry. Some 50 products are newly listed. Extremelybroad-band antennas, covering wireless allocations
from 1.7 to 2.7 GHz are within Kathrein’s recentlyintroduced products.
As a convenience for our customers, beginning inearly 2011, many Kathrein panel antennas are being
shipped with mounting brackets or band clamps asstandard equipment. Look for the notation “Mounting
Clamps Included” on the catalog page to find affectedmodels.
Our newest products for wireless applications featurebroadband operation, and incorporate adjustable
electrical downtilt with optional remote control, animportant advance that enhances customer satisfaction
and reduces site installation and maintenance costs.
We welcome your inquiries and we look forward to theopportunity to serve you!
Company Profil
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 4/365
Tab Page Summary
Dualband / Multiband Advanced Panel AntennasDualband • Omnidirectional • 700-960 / 1710-2170 MHz • X PolarizationDualband • 698-894 / 1710-2170 MHz • XX Polarization
Dualband • 824-960 / 1710-2170 MHz • V / V Polarization
Dualband • 790-960 / 1710-2690 MHz • XX PolarizationDualband • Trisector • 698-894 / 1710-2170 MHz • XX Polarization
Tripleband • 790-960 / 1710-2690 MHz • XXX Polarization
700 and 800 MHz X-Polarization Panel Antennas698-960 MHz • X Polarization700-960 MHz • XX Polarization
1710 to 2690 MHz Antennas1710-2200 MHz • XX Polarization1710-2200 MHz • X Polarization
1710-2690 MHz • V Polarization1710-2690 MHz • XX Polarization
1710-2170 MHz / 2496-2690 MHz Panel Antennas • XX Polarization1710-2690 MHz • V Polarization
2496-2690 MHz • X Polarization
2496-2690 MHz • XX Polarization
Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
700 MHz Singleband / Dualband Panel Antennas698-894 MHz • X Polarization • Fixed Downtilt
698-894 / 1710-2170 MHz • XX Polarization • Fixed Downtilt
Remote Electrical Downtilt
Other Directional AntennasBi-Directional Multiband
Log Periodic
YagiHalf-Parabolic
Omnidirectional Antennas
Indoor and Special Application AntennasE-911
TMA’s, Filters, & Electrical AccessoriesTower Mount AmplifiersPower Dividers & Power Taps
Combiners
DuplexersFilters
Couplers, Power Spitters, Hybrid Ring Junctions, 50 Ohm Loads, GPS Amplifier
Mechanical Accessories Mounting Kits
Dimensions of Panel Profiles
Technical Information
Technical Notes
FormulaeGlossary
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 5/365
1 x 131 1847 . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
1 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
131 1847. . . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
2 x 131 1847 . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
2 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
3 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
728 044 . . . . . . . . . . . . . . . . . . . . . . . . Decoupled power splitter, 900, 1:3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
729 812 . . . . . . . . . . . . . . . . . . . . . . . . Decoupled power splitter, 900, 1:3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
736 347 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
736 350 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
738 192 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 806-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
738 446 . . . . . . . . . . . . . . . . . . . . . . . . Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
738 446 . . . . . . . . . . . . . . . . . . . . . . . . Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
738 546 . . . . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
739 489V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
739 619 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
739 620 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
741 573 . . . . . . . . . . . . . . . . . . . . . . . . Omni indoor antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
741 984V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
741 988V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
741 989V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
741 990V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
742 033 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
742 034 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
742 113 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
742 186V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
742 192V01 . . . . . . . . . . . . . . . . . . . . Log-periodic antenna 790-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
742 196V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
742 210V01 . . . . . . . . . . . . . . . . . . . . 68° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
742 213V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
742 214V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
742 215V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
742 218V01 . . . . . . . . . . . . . . . . . . . . 45° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
742 219V01 . . . . . . . . . . . . . . . . . . . . 45° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
742 222V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
742 223V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
742 224V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
742 225V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
742 226V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
742 233V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140742 235V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
742 236V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
742 237 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
742 263 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
742 264V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
742 265V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
742 266V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
742 290 . . . . . . . . . . . . . . . . . . . . . . . . 90° V-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
742 351V01 . . . . . . . . . . . . . . . . . . . . 35° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Model Description Page
Model Number List
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 6/365v
Model Number List
742 352V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
782 10168 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
782 10169 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
782 10170 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
782 10171 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
782 10172 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
782 10215 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
782 10216 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
782 10253 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10254 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10255 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10256 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10257 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
782 10265 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
782 10347 . . . . . . . . . . . . . . . . . . . . . 3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
782 10348 . . . . . . . . . . . . . . . . . . . . . 3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
782 10349 . . . . . . . . . . . . . . . . . . . . . 3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
782 10401 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/PCS/24 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
782 10404 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/PCS/24 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
782 10429 . . . . . . . . . . . . . . . . . . . . . Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
782 10453 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10454 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10455 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10456 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
782 10469 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
782 10500 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
782 10502 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
782 10504 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
782 10577 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203782 10578 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
782 10601 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/AWS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
782 10606 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier AWS/AWS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
782 10660 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10661 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10662 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10663 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10664 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10665 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
782 10680 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
782 10681 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269782 10682 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
782 10683 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
782 10800 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
782 10808 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
782 10809 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
782 10810 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
782 10850 . . . . . . . . . . . . . . . . . . . . . DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
782 11055 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
782 11056 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Model Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 7/365
Model Number List
782 11091 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
782 11092 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
782 11093 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
782 11094 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
782 11095 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
784 10470 . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
790 213 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
790 881 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
791 397 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
791 398 . . . . . . . . . . . . . . . . . . . . . . . . Band pass filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
791 498 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
791 594 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
792 170 . . . . . . . . . . . . . . . . . . . . . . . . 4.7 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
792 180 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
792 219 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293
792 544 . . . . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
792 699 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
792 702 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
792 937 . . . . . . . . . . . . . . . . . . . . . . . . 4.7 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
792 964 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
792 965 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
792 966 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with N female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
792 967 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
793 006 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
793 105 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
793 106 . . . . . . . . . . . . . . . . . . . . . . . . 7 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
793 107 . . . . . . . . . . . . . . . . . . . . . . . . 7 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
793 108 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with N female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
793 301 . . . . . . . . . . . . . . . . . . . . . . . . DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207793 304 . . . . . . . . . . . . . . . . . . . . . . . . Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
793 506 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
793 554 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
793 555 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
800 10046 . . . . . . . . . . . . . . . . . . . . . 90° V-pol dual band panel antenna / integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
800 10121V01 . . . . . . . . . . . . . . . . . 88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
800 10122V01 . . . . . . . . . . . . . . . . . 88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
800 10123V03 . . . . . . . . . . . . . . . . . 88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
800 10141 . . . . . . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
800 10147 . . . . . . . . . . . . . . . . . . . . . Omni dual band antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
800 10202V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100800 10203V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
800 10204V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
800 10207V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
800 10208V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
800 10214V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
800 10215V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
800 10217V01 . . . . . . . . . . . . . . . . . 85° X-pol Cellular panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
800 10218V01 . . . . . . . . . . . . . . . . . 85° X-pol Cellular panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
800 10247V01 . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Model Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 8/365
Model Number List
800 10251V01 . . . . . . . . . . . . . . . . . 35° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
800 10290V01 . . . . . . . . . . . . . . . . . 65° X-pol triple band panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
800 10291V02 . . . . . . . . . . . . . . . . . 65° X-pol triple band panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
800 10292V02 . . . . . . . . . . . . . . . . . 68° X-pol triple band panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
800 10294V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
800 10300V01 . . . . . . . . . . . . . . . . . 85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
800 10303V02 . . . . . . . . . . . . . . . . . 67° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
800 10305V02 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
800 10306V02 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
800 10307V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
800 10308V01 . . . . . . . . . . . . . . . . . 85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
800 10309V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
800 10310V01 . . . . . . . . . . . . . . . . . 85° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
800 10314 . . . . . . . . . . . . . . . . . . . . . 65° X-pol integrated RET PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
800 10360 . . . . . . . . . . . . . . . . . . . . . 65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
800 10368 . . . . . . . . . . . . . . . . . . . . . 13° V-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
800 10375 . . . . . . . . . . . . . . . . . . . . . 65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
800 10378 . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
800 10425V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
800 10426V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
800 10428V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
800 10430 . . . . . . . . . . . . . . . . . . . . . Indoor omni antenna 1710-6000 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
800 10431 . . . . . . . . . . . . . . . . . . . . . Omni antenna 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
800 10439V01 . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
800 10442 . . . . . . . . . . . . . . . . . . . . . Omni WiMAX antenna 2490-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
800 10454V01 . . . . . . . . . . . . . . . . . 65° X-pol dual band panel antenna / integrated combiner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
800 10456V02 . . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
800 10465 . . . . . . . . . . . . . . . . . . . . . Indoor antenna with integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
800 10485V01 . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25800 10486V01 . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
800 10492V01 . . . . . . . . . . . . . . . . . 65° X-pol triple band panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
800 10504V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
800 10505V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
800 10510V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
800 10511V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
800 10516V01 . . . . . . . . . . . . . . . . . 65° XX-pol Cellular Panel Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
800 10517V01 . . . . . . . . . . . . . . . . . 65° XX-pol Cellular Panel Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
800 10518V01 . . . . . . . . . . . . . . . . . 88° XX-pol Cellular Panel Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
800 10606V01 . . . . . . . . . . . . . . . . . 45° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
800 10606V01 . . . . . . . . . . . . . . . . . 45° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116800 10614V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
800 10618 . . . . . . . . . . . . . . . . . . . . . 65° X-pol integrated RET PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
800 10621V01 . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
800 10622 . . . . . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
800 10634V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
800 10636 . . . . . . . . . . . . . . . . . . . . . 65° X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
800 10643 . . . . . . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
800 10644 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
800 10647V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Model Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 9/365
Model Number List
800 10651 . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
800 10665 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
800 10666 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
800 10675 . . . . . . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
800 10676 . . . . . . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
800 10677 . . . . . . . . . . . . . . . . . . . . . Dualband indoor antenna w/integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
800 10681 . . . . . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
800 10682 . . . . . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
800 10692 . . . . . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
800 10701 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
800 10701 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
800 10702 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
800 10702 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
800 10703 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
800 10703 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
800 10709 . . . . . . . . . . . . . . . . . . . . . Dualband indoor omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
800 10721 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
800 10722 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
800 10723 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
800 10734 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
800 10734 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
800 10735 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
800 10735 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
800 10736 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
800 10736 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
800 10764 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
800 10765 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
800 10766 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
840 10046 . . . . . . . . . . . . . . . . . . . . . 47° X-pol WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155840 10054B . . . . . . . . . . . . . . . . . . . . 87° X-pol WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
840 10250 . . . . . . . . . . . . . . . . . . . . . H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
840 10407 . . . . . . . . . . . . . . . . . . . . . Remote control cable 3.3 ft (1 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10408 . . . . . . . . . . . . . . . . . . . . . Remote control cable 6.6 ft (2 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10409 . . . . . . . . . . . . . . . . . . . . . Remote control cable 16.4 ft (5 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10410 . . . . . . . . . . . . . . . . . . . . . Remote control cable 32.8 ft (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10411 . . . . . . . . . . . . . . . . . . . . . Remote control cable 82.7 ft (25 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10412 . . . . . . . . . . . . . . . . . . . . . Remote control cable 131.2 ft (40 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10413 . . . . . . . . . . . . . . . . . . . . . Remote control cable 196.9 ft (60 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10414 . . . . . . . . . . . . . . . . . . . . . Remote control cable 262.5 ft (80 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10415 . . . . . . . . . . . . . . . . . . . . . Remote control cable 328.1 ft (100 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209840 10432 . . . . . . . . . . . . . . . . . . . . . Remote control cable 65.6 ft (20 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10433 . . . . . . . . . . . . . . . . . . . . . Remote control cable 164 ft (50 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10451 . . . . . . . . . . . . . . . . . . . . . Remote control cable 492.1 ft (150 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10452 . . . . . . . . . . . . . . . . . . . . . Remote control cable 656.2 ft (200 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10453 . . . . . . . . . . . . . . . . . . . . . Remote control cable 344.5 ft (105 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10454 . . . . . . . . . . . . . . . . . . . . . Remote control cable 360.9 ft (110 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10455 . . . . . . . . . . . . . . . . . . . . . Remote control cable 377.3 ft (115 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
840 10510 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 227
840 10511 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 227
Model Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 10/365ii
Model Number List
840 10512 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna with integrated combiner . . . . . . . . . . . . . . . . . . 66, 227
840 10513 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna with integrated combiner . . . . . . . . . . . . . . . . . . 66, 227
840 10515 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
840 10516 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
840 10517 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna with integrated combiner . . . . . . . . . . . . . . . 65
840 10518 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna with integrated combiner . . . . . . . . . . . . . . . 65
840 10520 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band panel antenna with integrated combiner. . . . . . . . . . . . . . . . . . . . 9
840 10525 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
840 21210 series . . . . . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
840 21220 series . . . . . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
840 21240 series . . . . . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
840 21250 series . . . . . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
840 21270 series . . . . . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
840 21280 series . . . . . . . . . . . . . . . 80° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
840 21410 series . . . . . . . . . . . . . . . 60° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
840 21420 series . . . . . . . . . . . . . . . 80° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
840 21440 series . . . . . . . . . . . . . . . 60° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
840 21450 series . . . . . . . . . . . . . . . 80° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
840 21470 series . . . . . . . . . . . . . . . 60° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
840 21480 series . . . . . . . . . . . . . . . 80° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
840 21600 series . . . . . . . . . . . . . . . 47° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
840 21630 series . . . . . . . . . . . . . . . 47° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
840 21660 series . . . . . . . . . . . . . . . 47° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
840 21800 series . . . . . . . . . . . . . . . 47° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
840 21830 series . . . . . . . . . . . . . . . 47° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
840 21860 series . . . . . . . . . . . . . . . 47° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
840 90013 . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
850 10002 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
850 10002 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321850 10003 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
850 10003 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
850 10005 . . . . . . . . . . . . . . . . . . . . . Kathrein installation tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
850 10006 . . . . . . . . . . . . . . . . . . . . . Dual panel mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
850 10007 . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
850 10010 . . . . . . . . . . . . . . . . . . . . . Flexible sealing frame for trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
850 10013 . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
850 10014 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
850 10015 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
850 10016 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325
850 10017 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325860 10002 . . . . . . . . . . . . . . . . . . . . . RET remote control signal splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
860 10006 . . . . . . . . . . . . . . . . . . . . . RET central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
860 10023 . . . . . . . . . . . . . . . . . . . . . Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
860 10026 . . . . . . . . . . . . . . . . . . . . . Central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
860 10030 . . . . . . . . . . . . . . . . . . . . . Lightning protection device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
860 10046 . . . . . . . . . . . . . . . . . . . . . Portable control adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
860 10100 . . . . . . . . . . . . . . . . . . . . . 2-way RF power divider, 200 watts, N female. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
860 10101 . . . . . . . . . . . . . . . . . . . . . 2-way RF power divider, 700 watts, 7-16 DIN female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
860 10102 . . . . . . . . . . . . . . . . . . . . . 3-way RF power divider, 200 watts, N female. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Model Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 11/365
Model Number List
860 10103 . . . . . . . . . . . . . . . . . . . . . 3-way RF power divider, 700 watts, 7-16 DIN female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
860 10104 . . . . . . . . . . . . . . . . . . . . . 4-way RF power divider, 200 watts, N female. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
860 10105 . . . . . . . . . . . . . . . . . . . . . 4-way RF power divider, 700 watts, 7-16 DIN female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
860 10136 . . . . . . . . . . . . . . . . . . . . . 2-way indoor power tap 694-2700 MHz May 21, 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
860 10137 . . . . . . . . . . . . . . . . . . . . . 2-way indoor power tap 694-2700 MHz May 21, 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
860 10138 . . . . . . . . . . . . . . . . . . . . . 2-way indoor power tap 694-2700 MHz May 21, 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
860 10142 . . . . . . . . . . . . . . . . . . . . . Low noise GPS Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
860 10147 . . . . . . . . . . . . . . . . . . . . . Remote control unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
860 10148 . . . . . . . . . . . . . . . . . . . . . Remote control unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
CL-900B . . . . . . . . . . . . . . . . . . . . . . . Cellular/SMR log-periodic antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
GC-1. . . . . . . . . . . . . . . . . . . . . . . . . . . Grounding clamp Jul 3, 2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
K63236001. . . . . . . . . . . . . . . . . . . . . Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
K637061 . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
K637067 . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
K6373621 . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
K751161 . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 806-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
K7515641 . . . . . . . . . . . . . . . . . . . . . . Omni antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
MF-900B . . . . . . . . . . . . . . . . . . . . . . . Miniflector antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
MF-940B . . . . . . . . . . . . . . . . . . . . . . . Miniflector antenna 928-953 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
MF-950B . . . . . . . . . . . . . . . . . . . . . . . Miniflector antenna 940-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
MKPP-23 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-1. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-13 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-2. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-3. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-4. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPS-5. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPX-10 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-11 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324MKPX-12 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-2. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKPX-3. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-4. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-5. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-6. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKPX-9. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
MKTB-1 . . . . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
MKTB-3 . . . . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324
OG-860/1920/GPS-A. . . . . . . . . . . E911 antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
OGB6-915N. . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230OGB9-915N. . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
PDL2-55 . . . . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
PDL3-333 . . . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
PDL4-2222. . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
PR-850 . . . . . . . . . . . . . . . . . . . . . . . . Paraflector antenna 806-896 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
PR-900 . . . . . . . . . . . . . . . . . . . . . . . . Paraflector antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
PR-950 . . . . . . . . . . . . . . . . . . . . . . . . Paraflector antenna 940-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
RY-840B . . . . . . . . . . . . . . . . . . . . . . . Radome protected yagi antenna 806-869 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
RY-860B . . . . . . . . . . . . . . . . . . . . . . . Radome protected yagi antenna 824-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Model Alternate Model Number Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 12/365
Model Number List
RY-900B . . . . . . . . . . . . . . . . . . . . . . . Radome protected yagi antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
SL11-915/DT2 . . . . . . . . . . . . . . . . . H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
SL11-940/DT2 . . . . . . . . . . . . . . . . . H-pol omni antenna 928-953 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
K6226507 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226207 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226307 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226401 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226501 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226201 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226301 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
784 10367 . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226217 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226317 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226611 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226411 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226511 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226111 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226211 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
K6226311 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
TY-840 . . . . . . . . . . . . . . . . . . . . . . . . . Yagi antenna 806-869 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
TY-860 . . . . . . . . . . . . . . . . . . . . . . . . . Yagi antenna 824-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
TY-900 . . . . . . . . . . . . . . . . . . . . . . . . . Yagi antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Model Alternate Model Number Description Page
Indicates New Model
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 13/365
Technical information
Title Page
A
Advanced X-POL Antenna Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332
Attaching the RCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
C
Calculating Downtilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331Calculating HPBW Touchdown Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333Comparison of Mechanical and Electrical Downtilt. . . . . . . . . . . . . . . . . . . . . . . . . . . 334
Control Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
D
Directional Antennas In Front of Reflecting Surfaces. . . . . . . . . . . . . . . . . . . . . . . . . 337
Dual Polarized Base Station Antennas for Polarization Diversity Systems . . . . . . . . 329
E
Engineering Reference - Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
F
Feeder Line Installation for Panel Antennas with Four Connectors . . . . . . . . . . . . . . 188Feeder Line Installation for Triple-band Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 189Formula For Estimating Gain For A Standard Directional Dipole Array . . . . . . . . . . . 331
G
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
I
Isolation Between Dipoles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
M
Mounting Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
P
Panel Antenna Test Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Panel Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
R
Radiation Patterns for Side-mounted Omnidirectional Antennas . . . . . . . . . . . . . . . . 336RET Components: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
S
Signal Distribution of Power Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
Signal Distribution of Power Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
W
Wind Survival Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 14/365i
Design and Testing Methods Kathrein Panel antennas are designed, manufactured, and tested using modern
computer modeling methods, up-to-date manufacturing techniques and sophisticated
measurement equipment to assure that every antenna that bears the Kathrein name will
provide long, reliable and trouble-free service. Only the finest materials are employedthat satisfy demands for safety, performance, strength, longevity and reliability. Our
antennas are designed to withstand the shock, vibration, moisture resistance, salt
spray, icing and temperature extremes according to rigorous IEC world standards for
antennas. Every antenna is 100% PIM and VSWR tested to exceed specifications. A
summary of the test standards for Kathrein antennas appears in Technical Bulletin #
118.
Radome Materials Every Kathrein radome is fabricated from high strength UV-resistant fiberglass; more
recent designs utilize a production process known as pulltrusion. This method of
fabrication forces a matrix of glass fibers and resins through precision dies, creating
a high strength design that when cured has a tensile strength some 4 times greater
than injection-molded, thermoformed plastics. Even glass filled thermoplastics do not
compare to this tough material. Kathrein’s pulltruded radomes are rigid envelopes that
add strength to the antenna structure. Kathrein’s radomes are extremely stable with
respect to thermal expansion. A typical 4-foot thermoplastic radome may expand by as
much as .117 inches under elevated temperature conditions, while a Kathrein radome
of the same size expands only .016 inches. This results in joints with higher integrity,
antennas that don’t buckle in the heat, or deform permanently in severe environments.
Of course, better joint stability means better sealing, which prevents moisture entry.
Reflectors Many backplanes and reflectors are formed from rigid alodined aluminum where
needed for strength and resistance to corrosion. When rigid pulltruded radomes
are employed, high conductivity plated copper reflectors are employed to reduce
losses and enhance radiation characteristics. Joints between individual parts of the
reflector/backplane assemblies are deliberately under tension to enhance point contact
conduction paths.
Radiators Kathrein radiating elements are precision-formed from the finest materials, cast
aluminum, brass, and tin plated, high purity copper, and are carefully chosen to
minimize loss and intermodulation products. They are modeled individually and
in arrays using such programs as Ansoft HFSS, Engleware Genesys, and NEC for
Windows.
Fasteners Fasteners and other materials are selected with care, not only for strength and
durability, but for compatibility with adjoining materials so that the passive
intermodulation characteristics of Kathrein antennas are the best in the industry.
Panel Antenna Product Features
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 15/365
Mounting Accessories
Mounting accessories are available in many sizes and varieties to accommodate many types
of installations. Kathrein’s standard pipe mount is usable from 2 inches up to 4.6 inches. For
lighter antennas, stainless steel band clamps are available for pipe diameters up to 5.3 inches.
Brackets are formed from hot dipped galvanized steel, and all hardware is stainless steel.
Many antennas are now being shipped with mounting devices as standard equipment
Feed Networks
While some advocate the use of microstrip feed networks, Kathrein employs high reliability,
low loss cable harnesses and power dividers. Coaxial cable harnesses, while complex, offer
superior PIM performance and straightforward designs without the costs associated with
low-loss substrate materials, and offer the ability to provide special characteristics, such as
downtilt, without the need to retool. Kathrein uses custom molded cable mounting devices
and harnessing clips to secure power divider networks, and employs carefully designed cable
interface junctions to minimize production of IM products.
Remote Controlled Electrical Downtilt
Kathrein’s latest adjustable downtilt antennas, many covering both the 700-900 MHz and
1700-2700 MHz bands, employ unique adjustment controls that permit rapid tilt adjustment
both manually and via optional remote control. No moving electrical parts are in contact with
each other, reducing the possibility of intermodulation.
Inverted Mounting Many of Kathrein’s antennas may be mounted inverted without the need for special orders. A
simple relocation of a drain hole plug permits an antenna to be mounted upside down using
standard hardware.
DC Grounding Most Kathrein antennas are fully DC-grounded devices, offering enhanced protection to the
antenna and base station equipment from static discharge and lightning. External metallic
parts of all antennas are grounded for the same reason.
Radiation Patterns
Kathrein maintains a full library of radiation patterns for its antennas, both horizontal and
vertical, at multiple downtilts (where appropriate), and at frequencies that span the operational
range of the antenna. These patterns are available as downloadable files from the Internet, and
on Kathrein’s CD-ROM catalog disk in formats that support many modern analytical tools.
Requests for CD-ROM’s may be made by phone, FAX or e-mail, or at our Website. Kathrein
radiation patterns are actual measured data from production antennas and represent accurately
the performance that can be expected at installation. Harmonized or idealized patterns are
never offered for analysis.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 16/365v
Panel Antenna Test Specifications
Kathrein Scala Division panel antennas are designed to survive the following environmental tests:
Parameter
2sinusoidal
2shocks
3low3high
relative
speed
4rain
5solar
2NaCl
Concentrate
Detail Parameter
displacement (mm)
acceleration (m/s2)
frequency range (Hz)
axes of vibration
duration (ms)
acceleration (m/s2)
number of shocks
direction of shocks
(°C)
(°C)
high (%)
(°C)Condensation (%)
(°C)
(m/s)
intensity
(impacting water)
(W/m2)
Concentration (%)
Humidity (%)
Temperature (°C)
Cyclical
Test Severity
7.4
4
5–9 9–200
3 axes
6
250
6 directions
-40 (cold)
+75 (dry heat)
93
+3090–100
+30
50
400,000 cycles
0.01m3 /min
90 kPa
water test chamber
1120
5
95–98
35
Duration
3 x 5 sweep cycles
16 hours
16 hours
21 days
6 cycles
none
15 min
max. 1000 hours
96 hours
(continuous)
Reference
1ETS 300 019-2-41IEC 721-3-4
1ETS 300 019-2-41IEC 721-3-4
1ETS 300 019-2-41IEC 721-3-4
1ETS 300 019-2-41
IEC 721-3-4
1ETS 300 019-2-41IEC 721-3-4
1ETS 300 019-2-41IEC 721-3-4
1ETS 300 019-2-41IEC 721-3-4
IEC 68-2-11
Type
Vibration
IEC class 4M5
(Mechanical Test)
Shocks
IEC Class 4M5
(Mechanical Test)
Air Temperature
IEC Class 4K2-
expanded
(Climatic Test)
Humidity
IEC Class 4K2(Climatic Test)
Air
IEC Class 4K2
(Climatic Test)
Water
IEC Class 4K2
(Climatic Test)
Radiation
IEC Class 4K2
(Climatic Test)
Salt mist
(Corrosion Test)
Note 1: ETS 300 019-2-4 : 1994: (Stationary use on non-weatherprotected locations)
European Telecommunication Standard
IEC 721-3-4 : 1995: (Stationary use on non-weatherprotected locations)
International Electrotechnical Commission
Note 2: Equipment under test mounted in the “in-use” position.
Note 3: Includes heat irradiation emitted from the equipment.
Note 4: The effect of splashing water is included in this test.
Note 5: The heating effect on equipment is covered by the test Dry Heat.Photochemical tests for materials are made separately.
500 bumps/each direc-
tion
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 17/365
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
Omni 698–894 MHz 6 dBi 840 10510, 840 10511 0° +45° and -45° 24 inches 66 1710–2170 MHz 9 dBi 0°
698–894 MHz 6 dBi 840 10512, 840 10513 0° +45° and -45° 24 inches 66 1710–2170 MHz 9 dBi with Integrated Combiner 0°
Dualband • Omnidirectional • 698-894 / 1710-2170 MHz • X Polarization
Dualband • 790-960 / 1710-2690 MHz • XX Polarization
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 806–960 MHz 8.5 dBi 800 10454V01 0° +45° and -45° 10.6 inches 171710–2180 MHz 9.5 dBi with Integrated Combiner 0°
790–960 MHz 11.4 dBi 742 226V01 0° +45° and -45° 22.8 inches 191710–2170 MHz 13.3 dBi 0°
790–960 MHz 11.4 dBi 742 222V01 0° +45° and -45° 22.8 inches 211710–2170 MHz 13.3 dBi with Integrated Combiner 0°
790–960 MHz 14 dBi 742 264V02 0°–14° ADT +45° and -45° 52.5 inches 271710–2180 MHz 17.2 dBi 0°–8° ADT
790–960 MHz 14 dBi 742 223V02 0°–14° ADT +45° and -45° 52.5 inches 291710–2180 MHz 17.2 dBi with Integrated Combiner 0°–8° ADT
790–960 MHz 15.9 dBi 742 265V02 0.5°–9.5° ADT +45° and -45° 76.1 inches 311710–2180 MHz 18.2 dBi 0°–6° ADT
790–960 MHz 16 dBi 742 224V02 0.5°–9.5° ADT +45° and -45° 76.1 inches 331710–2180 MHz 18.2 dBi with Integrated Combiner 0.5°–9.5° ADT
790–960 MHz 16.1 dBi 800 10485V01 2°–14° ADT +45° and -45° 80.2 inches 251710–2180 MHz 18.4 dBi 4°–14° ADT
790–960 MHz 17 dBi 800 10486V01 4°–12° ADT +45° and -45° 99.1 inches 231710–2180 MHz 18.3 dBi 4°–14° ADT
790–960 MHz 17 dBi 742 266V02 0°–7° ADT +45° and -45° 99.7 inches 351710–2180 MHz 18.2 dBi 0°–6° ADT
790–960 MHz 16.6 dBi 742 225V02 0°–7° ADT +45° and -45° 99.7 inches 371710–2180 MHz 18.2 dBi with Integrated Combiner 0°–6° ADT
790–960 MHz 16 dBi 800 10665 0°–10° ADT +45° and -45° 78.6 inches 391710–2690 MHz 18.5 dBi 0°–6° ADT
790–960 MHz 17 dBi 800 10666 0.5°–9.5° ADT +45° and -45° 103.2 inches 411710–2690 MHz 18.5 dBi 0°–6° ADT
88° 790–960 MHz 13.4 dBi 800 10121V01 0.5°–12.5° ADT +45° and -45° 54.5 inches 571710–2180 MHz 16.4 dBi 0.5°–10° ADT
790–960 MHz 14.8 dBi 800 10122V01 0°–10° ADT +45° and -45° 75.5 inches 591710–2180 MHz 18 dBi 0°–6° ADT
790–960 MHz 16.3 dBi 800 10123V03 0.5°–7° ADT +45° and -45° 103.7 inches 611710–2180 MHz 17.9 dBi 0°–6° ADT
Dualband / Multiband Advanced Antennas
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
90° 824–960 MHz 7 dBi 742 290 0° Vertical / Vertical 12.9 inches 63 1710–2170 MHz 7 dBi with Integrated Combiner 0°
824–960 MHz 10 dBi 800 10046 0° Vertical / Vertical 26.1 inches 641710–2170 MHz 11 dBi with Integrated Combiner 0°
Dualband • 824-960 / 1710-2170 MHz • V / V Polarization
1
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 698–894 MHz 10.5 dBi 840 10520 0° +45° and -45° 23.3 inches 9 1710–2170 MHz 13.3 dBi with Integrated Combiner 0°
698–894 MHz 10.5 dBi 840 10525 0° +45° and -45° 23.3 inches 9 1710–2170 MHz 13.5 dBi 0°
698–894 MHz 14.3 dBi 800 10764 0°–16° ADT +45° and -45° 55.2 inches 3 1710–2170 MHz 17.5 dBi 0°–10° ADT
698–894 MHz 15.3 dBi 800 10765 0°–10° ADT +45° and -45° 75.5 inches 5 1710–2170 MHz 18.5 dBi 0°–10° ADT
698–894 MHz 16.4 dBi 800 10766 0°–10° ADT +45° and -45° 96 inches 7 1710–2170 MHz 18.5 dBi 0°–10° ADT
85° 698–894 MHz 13.5 dBi 800 10721 0°–16° ADT +45° and -45° 54.9 inches 11 1710–2170 MHz 16.5 dBi 0°–10° ADT
698–894 MHz 14.7 dBi 800 10722 0°–10° ADT +45° and -45° 72 inches 13 1710–2170 MHz 17.5 dBi 0°–10° ADT
698–894 MHz 15.7 dBi 800 10723 0°–10° ADT +45° and -45° 93.2 inches 15 1710–2170 MHz 17.5 dBi 0°–10° ADT
Dualband • 698-894 / 1710-2170 MHz • XX Polarization
See the following page for triple band panel and dualband trisector antennas
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 18/365
A N T E N N A S
D u a l b a n d / M u l t i b a n d A d v a n c e d
Kathrein’s advanced antenna products are the result of long years of research and development to produce
antennas that provide maximum benefit for carriers operating in the cellular, PCS or AWS spectrum. Our
multiband products provide maximum performance for all wireless frequencies; gain, beamwidth, downtilt, and
isolation are uncompromised compared to single band antennas yet occupy minimum physical space.
Most double and triple band antennas feature cross-polarized (X-Pol) radiation systems, offering the benefits of
diversity operation but without the physical requirements of a space diversity implementation. Using our most
advanced products, a carrier may operate 3 independent three sector systems, cellular, PCS and AWS in the footprint
of one conventional 800 MHz monopole installation.
Kathrein’s higher gain antennas, characterized by narrow vertical beamwidths, include fully adjustable down-tilt,
(ADT) allowing site optimization without replacing antennas. Electrical downtilt is accomplished using non-contact,low intermodulation phase shifters to provide the exact beam tilt to maximize site performance. All Kathrein ADT
models may be optionally equipped for remote control operation. See more about this in the Remote Electrical
Downtilt section. Several antennas are equipped internally with the remote control unit, saving tower space and
reducing visual impact.
Some dual band antennas are equipped with on-board combiners/diplexers, reducing feedline requirements by a
factor of two, with no compromise in performance, saving both installation expense and tower loading.
Dualband / Multiband Advanced Panel Antennas
2
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 806–960 MHz 14.6 dBi 800 10290V01 0°–14° ADT +45° and -45° 60.6 inches 43 1710–2180 MHz 14.8 dBi 0°–14° ADT
1710–2180 MHz 14.4 dBi 0°–14° ADT
790–960 MHz 16.3 dBi 800 10291V02 2°–14° ADT +45° and -45° 81 inches 451710–2180 MHz 16.2 dBi 0°–14° ADT
1710–2180 MHz 16.1 dBi 0°–14° ADT
790–960 MHz 17 dBi 800 10492V01 4°–12° ADT +45° and -45° 106.1 inches 47
1710–2180 MHz 16.7 dBi 0°–14° ADT1710–2180 MHz 16.7 dBi 0°–14° ADT
790–960 MHz 17 dBi 800 10292V02 2.5°–9.5° ADT +45° and -45° 106.1 inches 491710–2180 MHz 17 dBi 0°–10° ADT
1710–2180 MHz 16.7 dBi 0°–10° ADT
790–960 MHz 16 dBi 800 10675 0°–10° ADT +45° and -45° 78.6 inches 511710–2170 MHz 18 dBi 0°–6° ADT
2490–2690 MHz 17.8 dBi 0°–6° ADT
790–960 MHz 16.9 dBi 800 10692 2°–10° ADT +45° and -45° 78.6 inches 531710–2690 MHz 17.5 dBi 0°–10° ADT
1710–2690 MHz 17.1 dBi 0°–10° ADT
790–960 MHz 17 dBi 800 10676 0°–10° ADT +45° and -45° 103.2 inches 551710–2170 MHz 18 dBi 0°–6° ADT
2490–2690 MHz 18 dBi 0°–6° ADT
Tripleband • 790-960 / 1710-2690 MHz • XXX Polarization
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 698–894 MHz 10.4 dBi 840 10515, 840 10516 0° +45° and -45° 24 inches 65 1710–2170 MHz 13.5 dBi 0°
698–894 MHz 10.4 dBi 840 10517, 840 10518 0° +45° and -45° 24 inches 65 1710–2170 MHz 13.5 dBi Trisector with 0°
Integrated Combiner
Dualband • Trisector • 698-894 / 1710-2170 MHz • XX Polarization
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 19/365
Dualband Panel AntennaXX- polarization
65°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–16°, 0°–10°Internal Remote Co
800 10764
11223-E936.4133
698–894 MHz
Vertical pattern±45°- polarization
0°–16° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 14.3 dBi 14.8 dBi 17.3 dBi 17.5 dBi 17.3 dBi
Front-to-back ratio >30 dB (co-polar) >27 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)32 dB (average) 30 dB (average) 34 dB (average) 34 dB (average) 34 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 68° (half-power) 65° (half-power) 61° (half-power) 60° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 15° (half-power) 13.5° (half-power) 7.5° (half-power) 7.5° (half-power) 7.5° (half-power)vertical beamwidth
Electrical downtilt 0°–16° 0°–16° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 8° 16° T 0° 8° 16° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 17 16 16 dB 18 16 16 dB 18 18 17 dB 18 18 17 dB 18 18 17 dB
average 19 19 18 dB 22 20 20 dB 20 20 20 dB 20 20 20 dB 20 20 20 dBCross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 15 dB (avg) >8 dB, 14 dB (avg) >8 dB, 14 dB (avg) >10 dB, 16 dB (avg) >8 dB, 14 dB (avg)
Tracking 1.5 db 1.5 db 2.0 db 1.0 db 2.0 db
Squint ±2.5° ±4° ±4° ±1.5° ±4°
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 ispossible in an RET system supporting AISG 1.1 or suppor ting 3GPP/AISG 2.0 after performinga layer 2 reset before address assignment. The protocol can also be changed as follows:AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform alayer 7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 20/365
Dualband Panel AntennaXX- polarization
800 10764
1710–2170–45
7-16
iRCU
8pinfemale
8pinmale
8pinfemale
8pinmale
1710–2170+45
7-16
698– 894–45
698– 894+45
7-167-16
inoutiRCU
inout
kcengnolkcengnol
Mechanical specifications:
Weight 40.8 lb (18.5 kg)45.2 lb (20.5 kg) clamps included53.4 lb (24.2 kg) clamps and tilt kit included
Dimensions 55.2 x 11.8 x 6 inches(1403 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 156 lbf / 59 lbf / 160 lbf
(690 N) / (260 N) / (710 N)Mounting category M (Medium)
Wind survival rating 150 mph (240 kph)Shipping dimensions 64.8 x 12.6 x 7.5 inches
(1646 x 322 x 190 mm)
Shipping weight 50 lb (22.7 kg)
Mounting Mounting hardware included for 2 to 4.6 inch(50 to 115 mm) OD masts.
Order Information:
Model Description
800 10764 Dualband antenna with 738 546 mounting bracket0°–16° // 0°–10° electrical downtilt
800 10764 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–16° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
11.8 inches
(300 mm)
55.2 inches
(1403 mm)
2.625 inches ± 0.125
(68 mm ± 4)
6 inches
(152 mm)
56.4 inches(1433 mm)
58 inches
(1474 mm)
Note: Refer to part number
860 10149 for thespecifications of the
remote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 21/365
Dualband Panel AntennaXX- polarization
65°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–10°, 0°–10°Internal Remote Co
800 10765
11224-D936.4134
698–894 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 15.3 dBi 15.8 dBi 18 dBi 18.5 dBi 18 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)34 dB (average) 34 dB (average) 34 dB (average) 34 dB (average) 34 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 68° (half-power) 65° (half-power) 63° (half-power) 62° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 11.8° (half-power) 10.8° (half-power) 5.8° (half-power) 5.8° (half-power) 5.8° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 16 18 dB 18 18 16 dB 18 18 18 dB 18 18 18 dB 18 18 18 dB
average 18 20 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dBCross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 25 dB (typical) 30 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 14 dB (avg) >8 dB, 15 dB (avg) >10 dB, 15 dB (avg) >8 dB, 15 dB (avg)
Tracking 1.0 db 1.5 db 1.5 db 1.0 db 1.5 db
Squint ±2.5° ±3° ±3° ±2.5° ±3°
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performing a layer2 reset before address assignment. The protocol can also be changed as follows: AISG 1.1 to3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform a layer 7 reset ora power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield "Installer’s ID"and perform a layer 2 reset or a power reset. After switching the protocol any other informationcan be entered into the "Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 22/365
Dualband Panel AntennaXX- polarization
800 10765
Mechanical specifications:
Weight 51.8 lb (23.5 kg)56.2 lb (25.5 kg) clamps included69.2 lb (31.4 kg) clamps and tilt kit included
Dimensions 75.5 x 11.8 x 6 inches (1918 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 214 lbf / 81 lbf / 221 lbf
(950 N) / (360 N) / (980 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 85.3 x 12.7 x 7.5 inches (2166 x 322 x 190 mm)
Shipping weight 62 lb (28.1 kg)
Mounting Mounting hardware included for 2 to 4.6 inch(50 to 115 mm) OD masts.
11.8 inches
(300 mm)
75.5 inches
(1918 mm)
2.625 inches ± 0.125(68 mm ± 4)
6 inches
(152 mm)
76.7 inches
(1948 mm)
78.3 inches
(1989 mm)
698– 894
–45
7-16
1710–2170
+45
7-16
1710–2170
–45
7-16
698– 894
+45
7-16
IRT outin
8pin male
8pin female
IRT inout
8pin male
8pin femalelong neck long neck
Note: Refer to part number
860 10149 for thespecifications of the
remote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
Order Information:
Model Description
800 10765 Dualband antenna with 738 546 mounting bracket0°–10° // 0°–10° electrical downtilt
800 10765 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 23/365
Dualband Panel AntennaXX- polarization
65°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–10°, 0°–10°Internal Remote Co
800 10766
11225-C936.4135
698–894 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 16.4 dBi 16.8 dBi 18 dBi 18.5 dBi 18 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)34 dB (average) 34 dB (average) 34 dB (average) 34 dB (average) 34 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 68° (half-power) 65° (half-power) 63° (half-power) 62° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 9.5° (half-power) 8.7° (half-power) 5.8° (half-power) 5.8° (half-power) 5.8° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 16 16 dB 18 18 16 dB 18 18 18 dB 18 18 18 dB 18 18 18 dBaverage 18 20 18 dB 20 20 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dB
Cross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 25 dB (typical) 30 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 15 dB (avg) >10 dB, 12 dB (avg) >8 dB, 15 dB (avg) >10 dB, 15 dB (avg) >8 dB, 15 dB (avg)
Tracking, avg. 1 dB 1 dB 1.5 dB 1.5 dB 1.5 dB
Squint ±2.5° ±2.5° ±3° ±3° ±3°
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performing alayer 2 reset before address assignment. The protocol can also be changed as follows: AISG1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform a layer7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 24/365
Dualband Panel AntennaXX- polarization
800 10766
Mechanical specifications:
Weight 58.4 lb (26.5 kg)62.8 lb (28.5 kg) clamps included75.8 lb (34.4 kg) clamps and tilt kit included
Dimensions 96 x 11.8 x 6 inches(2438 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 286 lbf / 106 lbf / 297 lbf
(1270 N) / (470 N) / (1320 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)Shipping dimensions 104.6 x 12.6 x 7.5 inches
(2656 x 320 x 190 mm)
Shipping weight 71.6 lb (32.5 kg)
11.8 inches
(300 mm)
2.625 inches ± 0.125
(68 mm ± 4)
6 inches(152 mm)
Note: Refer to part number860 10149 for the
specifications of theremote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
96 inches
(2438 mm)
97.6 inches
(2478 mm)
99.4 inches
(2525 mm)
698– 894–45
7-16
1710–2170+45
7-16
1710–2170–45
7-16
698– 894+45
7-16
iRCU outin
8pin male
8pin female
iRCU inout
8pin male
8pin femalelong neck long neck
Order Information:
Model Description
800 10766 Dualband antenna with 738 546 mounting bracket0°–10° // 0°–10° electrical downtilt
800 10766 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 25/365
Dualband Panel AntennaXX- polarization
65°
698–894 MHz1710–2170 MH
XX - POL
0° Electrical Down
840 10520, 840 1052
Specifications:
Frequency range 698–894 MHz1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Isolation intrasystem >30 dB
Weight 15.9 lb (7.2 kg)
Dimensions 23.3 x 10.6 x 6.2 inches(593 x 270 x 157 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 23 lbf / 18 lbf / 41 lbf
(100 N) / (80 N) / (180 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 29 x 11.9 x 7.6 inches(736 x 302 x 192 mm)
Shipping weight 19.2 lb (8.7 kg)
11241-B11203-FRO/b
Specifications: 698–806 MHz 806–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 10.5 dBi 11 dBi 13.3 dBi 13.5 dBi 12.8 dBi
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 71° (half-power) 68° (half-power) 61° (half-power) 63° (half-power) 70° (half-power)horizontal beamwidth
+45° and -45° polarization 37° (half-power) 31° (half-power) 19° (half-power) 18° (half-power) 18.5° (half-power)vertical beamwidth
Cross polar ratio (typical)Main direction 0° 30 dB 30 dB 25 dB 25 dB 25 dBSector ±60° >8 dB >8 dB >8 dB >8 dB >8 dB
Connector 4 x 7-16 DIN female (long neck)
Profile PA3
698–894 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
1710–2170 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
NE W
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Specifications: 698–806 MHz 806–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 10.5 dBi 11 dBi 12.5 dBi 13.3 dBi 13.6 dBi
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 72° (half-power) 66° (half-power) 64° (half-power) 64° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 37° (half-power) 34° (half-power) 19° (half-power) 18.5° (half-power) 18° (half-power)vertical beamwidth
Cross polar ratio (typical)Main direction 0° 30 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >8 dB >8 dB >8 dB
Integrated combiner *The insertion loss is included in the given antenna gain values
Connector 2 x 7-16 DIN female (long neck)
840 10520 Dualband Panel Antenna with Integrated Combiner
840 10525 Dualband Panel Antenna
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 26/3650
Dualband Panel AntennaXX- polarization
840 10520, 840 10525
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Locking Tilt Mount Kit(optional) 0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
10.6 inches(270 mm)
26.7 inches(679 mm)
23.3 inches(593 mm)
25.2 inches(639 mm)
6.2 inches(157 mm)
2.625 inches ± 0.125(68 mm ± 4)
Layout of interface
698–894
1710–2170
–45°–45° +45° +45°
10.6 inches(270 mm)
26.7 inches(679 mm)
23.3 inches(593 mm)
25.2 inches(639 mm)
6.2 inches(157 mm)
2.625 inches ± 0.125(68 mm ± 4)
840 10525840 10520
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 27/365
Dualband Panel AntennaXX- polarization
85°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–16°, 0°–10°Internal Remote Co
800 10721Dualband Panel AntennaXX- polarization
11226-F936.4127
698–894 MHz
Vertical pattern±45°- polarization
0°–16° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 13.5 dBi 14 dBi 16.5 dBi 16.5 dBi 16.5 dBi
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)32 dB (average) 28 dB (average) 26 dB (average) 27 dB (average) 26 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 85° (half-power) 85° (half-power) 88° (half-power) 85° (half-power) 88° (half-power)horizontal beamwidth
+45° and -45° polarization 16.5° (half-power) 15.1° (half-power) 6.7° (half-power) 6.7° (half-power) 6.7° (half-power)vertical beamwidth
Electrical downtilt 0°–16° 0°–16° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 8° 16° T 0° 8° 16° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 18 16 18 dB 18 18 17 dB 18 18 16 dB 18 18 18 dB 18 18 16 dB
average 20 19 19 dB 22 20 20 dB 22 22 19 dB 22 22 22 dB 22 22 19 dBCross polar ratioMain direction 0° 20 dB (typical) 22 dB (typical) 15 dB (typical) 15 dB (typical) 15 dB (typical)Sector ±60° >10 dB, 14 dB (avg) >10 dB, 15 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB (avg
Tracking, avg. 1.5 dB 1.5 dB 0.5 dB 0.5 dB 0.5 dB
Squint ±4.5° ±4.5° ±4° ±4° ±4°
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specific command. Start-up operation of the RCU86010149 is possible in an RET system supporting AISG 1.1 or supporting 3GPP/AISG2.0 after performing a layer 2 reset before address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed"Installer’s ID" and perform a layer 7 reset or a power reset. 3GPP to AISG 1.1: Enter"AISG 1" into the additional datafield "Installer’s ID" and perform a layer 2 reset or apower reset. After switching the protocol any other information can be entered into the"Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 28/3652
Dualband Panel AntennaXX- polarization
800 10721
Mechanical specifications:
Weight 46.3 lb (21 kg)50.7 lb (23 kg) clamps included58.9 lb (26.7 kg) clamps and tilt kit included
Dimensions 54.9 x 11.8 x 6 inches(1394 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 151 lbf / 57 lbf / 158 lbf
(670 N / 250 N / 700 N)Mounting category M (Medium)
Wind survival rating 150 mph (240 kph)Shipping dimensions 63.6 x 12.6 x 7.5 inches
(1616 x 322 x 190 mm)
Shipping weight 55.1 lb (25 kg)
Mounting Mounting hardware included for 2 to 4.6 inch(50 to 115 mm) OD masts.
698– 894
–45
7-16
1710–2170
+45
7-16
1710–2170
–45
7-16
698– 894
+45
7-16
IRT outin
8pin male
8pin female
IRT inout
8pin male
8pin femalelong neck long neck
11.8 inches
(300 mm)
2.625 inches ± 0.125
(68 mm ± 4)
6 inches
(152 mm)
Note: Refer to part number860 10149 for the
specifications of theremote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause
undesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
54.9 inches
(1394 mm)
56.1 inches(1424 mm)
57.6 inches
(1464 mm)
Order Information:
Model Description
800 10721 Dualband antenna with 738 546 mounting bracket0°–16° // 0°–10° electrical downtilt
800 10721 K Dualband antenna with 738 546 mounting bracketand 850 10113 mechanical tilt bracket0°–16° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 29/365
Dualband Panel AntennaXX- polarization
800 10722
85°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–10°, 0°–10°Internal Remote Co
11227-F936.4128
698–894 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 14.65 dBi 15.15 dBi 17 dBi 17.5 dBi 17 dBi
Front-to-back ratio >28 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)31 dB (average) 29 dB (average) 28 dB (average) 28 dB (average) 28 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 85° (half-power) 85° (half-power) 85° (half-power) 85° (half-power) 85° (half-power)horizontal beamwidth
+45° and -45° polarization 12.1° (half-power) 11° (half-power) 5.5° (half-power) 5.5° (half-power) 5.5° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 16 18 dB 15 18 18 dB 16 16 16 dB 16 16 16 dB 16 16 16 dBaverage 17 19 21 dB 16 19 22 dB 18 18 18 dB 17 17 18 dB 18 18 18 dB
Cross polar ratioMain direction 0° 22 dB (typical) 24 dB (typical) 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 16 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB(avg)
Tracking, avg. 0.5 dB 0.5 dB 0.5 dB 0.5 dB 0.5 dB
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 ispossible in an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performinga layer 2 reset before address assignment. The protocol can also be changed as follows:AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform alayer 7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 30/3654
Dualband Panel AntennaXX- polarization
800 10722
Mechanical specifications:
Weight 57.3 lb (26 kg)61.7 lb (28 kg) clamps included74.7 lb (33.9 kg) clamps and tilt kit included
Dimensions 72 x 11.8 x 6 inches(1828 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 203 lbf / 75 lbf / 212 lbf
(900 N / 330 N / 940 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)Shipping dimensions 80.7 x 12.6 x 7.5 inches
(2050 x 322 x 190 mm)
Shipping weight 63.9 lb (29 kg)
Mounting Mounting hardware included for 2 to 4.6 inch(50 to 115 mm) OD masts.
698– 894
–45
7-16
1710–2170
+45
7-16
1710–2170
–45
7-16
698– 894
+45
7-16
IRT outin
8pin male
8pin female
IRT inout
8pin male
8pin femalelong neck long neck
11.8 inches
(300 mm)
2.625 inches ± 0.125
(68 mm ± 4)
6 inches
(152 mm)
Note: Refer to part number860 10149 for the
specifications of theremote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
72 inches
(1828 mm)
73.1 inches(1858 mm)
74.6 inches(1896 mm)
Order Information:
Model Description
800 10722 Dualband antenna with 738 546 mounting bracket0°–10° // 0°–10° electrical downtilt
800 10722 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 31/365
800 10723Dualband Panel AntennaXX- polarization
85°
698–894 MHz1710–2170 MH
XX - POL
Adjustable Electrical D
0°–10°, 0°–10°Internal Remote Co
11228-D936.4129
698–894 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
1710–2170 MHz
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB // intersystem >35 dB
IRT specifications:
Logical interface ex factory1) AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out
Power supply 10–30 V
Power Consumption <1 W (standby); <8.5 W (motor activated)
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz
Gain 15.65 dBi 16.15 dBi 17.5 dBi 17.5 dBi 17.5 dBi
Front-to-back ratio >28 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)31 dB (average) 29 dB (average) 28 dB (average) 28 dB (average) 28 dB (average)
Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input
+45° and -45° polarization 85° (half-power) 85° (half-power) 85° (half-power) 85° (half-power) 85° (half-power)horizontal beamwidth
+45° and -45° polarization 9.5° (half-power) 8.5° (half-power) 5.5° (half-power) 5.5° (half-power) 5.5° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable
Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T
first sidelobe above main beam 16 16 18 dB 15 18 18 dB 16 16 16 dB 16 16 16 dB 16 16 16 dBaverage 17 19 21 dB 16 19 22 dB 18 18 18 dB 17 17 18 dB 18 18 18 dB
Cross polar ratioMain direction 0° 22 dB (typical) 24 dB (typical) 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 16 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB(avg)
Tracking, avg. 0.5 dB 0.5 dB 0.5 dB 0.5 dB 0.5 dB
Squint ±4.0° ±4.0° ±4.5° ±4.5° ±4.5°
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or suppor ting 3GPP/AISG 2.0 after performing a layer2 reset before address assignment. The protocol can also be changed as follows: AISG 1.1 to3GPP: Enter "3GPP" into the additional data filed "Installer ’s ID" and perform a layer 7 reset ora power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield "Installer’s ID"and perform a layer 2 reset or a power reset. After switching the protocol any other informationcan be entered into the "Installer’s ID" field.
2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). The
connector should be tightened by hand only!
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 32/3656
800 10723Dualband Panel Antenna
XX- polarization
Mechanical specifications:
Weight 68.3 lb (31 kg)72.8 lb (33 kg) clamps included85.8 lb (38.9 kg) clamps and tilt kit included
Dimensions 93.2 x 11.8 x 6 inches(2368 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 273 lbf / 102 lbf / 286 lbf
(1210 N) / (450 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)Shipping dimensions 102.2 x 12.7 x 7.5 inches
(2596 x 322 x 190 mm)
Shipping weight 83.1 lb (37.7 kg)
11.8 inches
(300 mm)
2.625 inches ± 0.125
(68 mm ± 4)
6 inches(152 mm)
Note: Refer to part number
860 10149 for thespecifications of the
remote control actuator.
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
698– 894–45
7-16
1710–2170+45
7-16
1710–2170–45
7-16
698– 894+45
7-16
iRCU outin
8pin male
8pin female
iRCU inout
8pin male
8pin femalelong neck long neck
93.2 inches
(2368 mm)
94.4 inches(2398 mm)
96 inches
(2438 mm)
Order Information:
Model Description
800 10723 Dualband antenna with 738 546 mounting bracket0°–10° // 0°–10° electrical downtilt
800 10722 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–10° // 0°–10° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 33/365
General specifications:
Frequency range 806–960 MHz1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation intrasystem >30 dBWeight 9.9 lb (4.5 kg)
14.3 lb (6.5 kg) clamps included
Dimensions 10.6 x 10.3 x 4.6 inches(270 x 262 x 116 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 21 lbf / 8 lbf / 30 lbf
(92 N) / (35 N) / (130 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 14.8 x 11.3 x 6.5 inches(377 x 287 x 165 mm)
Shipping weight 15.4 lb (7 kg)
Integrated combiner The insertion loss is included in the given
antenna gain values.
Dualband Panel Antenna with Integrated CombinerXX- polarization
65°
806–960 MHz1710–2180 MH
XX - POLIntegrated Comb
0° Electrical Down
800 10454V0
Specifications: 806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain 8.5 dBi 8.5 dBi 8.5 dBi 9.5 dBi 9.5 dBi 9.2 dBi
Front-to-back ratioCo-polar >25 dB >25 dB >25 dB >25 dB >25 dB >25 dBTotal power >20 dB >20 dB >22 dB >22 dB >22 dB >22 dB
+45° and -45° polarization 67° (half-power) 67° (half-power) 65° (half-power) 60° (half-power) 63° (half-power) 68° (half-power)horizontal beamwidth
+45° and -45° polarization 68° (half-power) 68° (half-power) 69° (half-power) 64° (half-power) 62° (half-power) 60° (half-power)vertical beamwidth
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 20 dB (typical) 20 dB (typical) 19 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Maximum input power 250 watts 100 watts(at 50°C)
Maximum input power 350 wattsper combined input(at 50°C)
11267-A936.3877/c
Profile PA1
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
806–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 34/3658
Dualband Panel Antenna with Integrated CombinerXX- polarization
800 10454V01
C C
61-761-7
806–960–45
806–960+45
1710–2180–45
1710–2180+45
-45 +45
10.3 inches(262 mm)
14.3 inches(362 mm)
10.6 inches(270 mm)
12.7 inches(322 mm)
4.6 inches(116 mm)
2.625 inches ± 0.125(68 mm ± 4)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–40 degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 35/365
Dualband Panel AntennaXX- polarization
65°
790–960 MHz1710–2170 MH
XX - POL
0° Electrical Down
742 226V01
General specifications:
Frequency range 790–960 MHz1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Isolation intrasystem >30 dBintersystem >42 dB (790–960 // 1710–2170 MHz)
Weight 16.5 lb (7.5 kg)20.9 lb (9.5 kg) clamps included
Dimensions 22.8 x 10.3 x 5.5 inches(579 x 262 x 139 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 45 lbf / 21 lbf / 57 lbf
(200 N) / (90 N) / (250 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 29.8 x 11.1 x 6.8 inches(756 x 282 x 172 mm)
Shipping weight 25.4 lb (11.5 kg)
11316-B936.3967/d
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 11.1 dBi 11.4 dBi 11.8 dBi 12.8 dBi 13.3 dBi 13.6 dBi
Front-to-back ratio (180° ± 30°) co-polar >23 dB >23 dB >25 dB >25 dB >25 dB >25 dBtotal power >20 dB >20 dB >22 dB >22 dB >22 dB >22 dB
Maximum power per input 250 watts (at 50°C) 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power) 66° (half-power) 60° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 34° (half-power) 33° (half-power) 30° (half-power) 20° (half-power) 18° (half-power) 17.5° (half-powevertical beamwidth
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 16 dB (typical) 18 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Tracking, average 1 dB 0.5 dB
Squint ±3° ±1.5°
1710–2170 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
Profile PA2
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 36/3650
Dualband Panel AntennaXX- polarization
742 226V01
22.8 inches(579 mm)
5.5 inches(139 mm)
26.4 inches(670 mm)
24.8 inches(630 mm)
10.3 inches(262 mm)
2.625 inches ± 0.125(68 mm ± 4)
790–960
1710–2170–45 +45
–45 +45
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Locking Tilt Mount Kit(optional) 0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 37/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 38/3652
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–34 degrees downtilt angle.
Reference the Mechanical Accessories section.
Dualband Panel Antenna with Integrated CombinerXX- polarization742 222V01
22.8 inches
(579 mm)
26.4 inches
(670 mm)
24.8 inches
(630 mm)
5.5 inches(139 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.3 inches
(262 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 39/365
Dualband Panel AntennaXX- polarization
11335-A936.3950/a
65°
790–960 MHz1710–2180 MH
XX - POL
Adjustable Electrical D
4°–12°, 4°–14°Remote Control Op
Profile PA2
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >45 dB (790–960 // 1710–2180 MHz)
Weight 61.2 lb (28 kg)66.1 lb (30.kg) clamps included
Dimensions 99.1 x 10.3 x 5.5 inches(2516 x 262 x 139 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 207 lbf / 104 lbf / 259 lbf
(920 N / 460 N / 1150 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 111.3 x 11.1 x 6.8 inches(2826 x 282 x 172 mm)
Shipping weight 72.8 lb (33 kg)
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
4°–12° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
4°–14° electrical downtilt
Specifications : 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain (average) 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° T(dbi) 16.8 16.7 16.6 17 16.8 16.8 17.2 17 16.8 17.8 18.1 17.5 18.3 18.3 17.8 18.7 18.7 18
Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB
(180°±30°)Maximum input power 400 watts (per input) 250 watts (per input)
(at 50°C) 800 watts (total power) 500 watts (total power)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 66° (half-power) 66° (half-power) 64° (half-power) 61° (half-power)vertical beamwidth 7.5° (half-power) 7.4° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power
Electrical downtilt 4°–12° 4°–12° 4°–12° 4°–14° 4°–14° 4°–14°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° Tfirst sidelobe above main beam 18 17 16 dB 19 18 18 dB 19 18 18 dB 20 18 16 dB 19 19 16 dB 18 18 18 dwithin 0°–20° sector above horizon 15 15 14 dB 16 15 14 dB 16 15 14 dB 17 17 15 dB 17 17 15 dB 17 17 15 d
Cross polar ratioMain direction 0° 23 dB (typical) 24 dB (typical) 25 dB (typical) 18 dB (typical) 18 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
800 10486VMounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 40/3654
800 10486V01
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
Dualband Panel AntennaXX- polarization
10.3 inches
(262 mm)
99.1 inches(2516 mm)
5.5 inches(139 mm)
102.6 inches(2607 mm)
101.1 inches(2567 mm)
2.625 inches ± 0.125(68 mm ± 4)
1710–2180
790–960
–45 +45
–45 +45
RCU790–960
RCU1710–2180
Layout of interface
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 41/365
Dualband Panel AntennaXX- polarization
11334-A936.3949/a
65°
790–960 MHz1710–2180 MH
XX - POL
Adjustable Electrical D
2°–14°, 4°–14°Remote Control Op
Profile PA2
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -153 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >35 dB (790–960 // 1710–2180 MHz)
Weight 52.9 lb (24 kg)57.3 lb (26 kg) clamps included
Dimensions 80.2 x 10.3 x 5.5 inches(2038 x 262 x 139 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 169 lbf / 86 lbf / 203 lbf
(750 N) / (380 N) / (900 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 92.8 x 11.1 x 6.8 inches(2356 x 282 x 172 mm)
Shipping weight 61.7 lb (28 kg)
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
2°–14° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
4°–14° electrical downtilt
Specifications: 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dBi) 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° T16.2 16 15.7 16.3 16.1 15.8 16.4 16.2 15.8 18 18.2 17.7 18.4 18.5 17.8 18.7 18.6 18
Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30°)
Maximum input power 790–960 MHz 1710–2180 MHzper input (at 50°C) 400 watts 250 watts
total (at 50°C) 800 watts 500 watts+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power) 66° (half-power) 64° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 10° (half-power) 9.7° (half-power) 9.3° (half-power) 5° (half-power) 4.7° (half-power) 4.5° (half-power)vertical beamwidth
Electrical downtilt 2°–14° 2°–14° 2°–14° 4°–14° 4°–14° 4°–14°continuously adjustable
Sidelobe suppression for 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° Tfirst sidelobe above main beam 17 17 15 dB 17 17 16 dB 17 17 16 dB 20 18 15 dB 19 18 15 dB 18 17 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 20 dB (typical) 20 dB (typical) 21 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
800 10485V
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 42/3656
800 10485V01
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
Dualband Panel AntennaXX- polarization
10.3 inches
(262 mm)
5.5 inches(139 mm)
2.625 inches ± 0.125(68 mm ± 4)
1710–2180
790–960
–45 +45
–45 +45
RCU790–960
RCU1710–2180
Layout of interface
82.2 inches(2089 mm)
80.2 inches
(2038 mm)
83.8 inches(2129 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 43/365
Dualband Panel AntennaXX- polarization
65°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0°–14°, 0°–8°
Remote Control Op
742 264V0
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >45 dBintersystem Typ. >50 dB (790–960 // 1710–2180 MHz)
Weight 34.2 lb (15.5 kg)38.6 lb (17.5.kg) clamps included
Dimensions 52.5 x 10.3 x 5.7 inches(1334 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 126 lbf / 59 lbf / 135 lbf
(560 N) / (260 N) / (600 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 64.8 x 11.1 x 7.2 inches(1646 x 282 x 182 mm)
Shipping weight 47.2 lb (21.4 kg)
11349-A936.3839/c
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
Vertical pattern±45°- polarization
0°–14° electrical downtilt
Horizontal pattern±45°- polarization
790–960 MHz 1710–2180 MHz0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MH
Gain (average) 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° (dbi) 14.1 14.1 13.7 14.3 14.2 13.8 14.5 14.4 13.9 17.1 17.3 17.1 17.2 17.4 17.1 17.3 17.5 17.2
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >32 dB (co-polar) >32 dB (co-polar) >32 dB (co-po
Maximum input power 500 watts (per input) 250 watts (per input)(at 50°C) 1000 watts (total power) 500 watts (total power)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 62° (half-power) 61° (half-powervertical beamwidth 16.5° (half-power) 16° (half-power) 15.3° (half-power) 7.4° (half-power) 7.1° (half-power) 6.7° (half-powe
Electrical downtilt 0°–14° 0°–14° 0°–14° 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° first sidelobe above main beam 17 16 15 dB 19 18 18 dB 17 18 17 dB 17 17 16 dB 15 15 15 dB 16 16 15 (average)
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Tracking (average) 1 dB 0.5 dB
Squint ±2° ±3°
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 44/3658
742 264V02Dualband Panel Antenna
XX- polarization
10.3 inches(261 mm)
53.8 inches(1367 mm)
52.5 inches
(1334 mm)
55.3 inches(1405 mm)
2.625 inches ± 0.125
(68 mm ± 4)
5.7 inches
(146 mm)
Layout of interface
790–960 1710–2180
RCU1710–2180
RCU790–960
–45° –45°+45° +45°
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 45/365
742 223V02Dualband Panel Antenna with Integrated CombinerXX- polarization
65°
790–960 MHz1710–2180 MH
XX-POLIntegrated Comb
Adjustable Electrical D0°–14°, 0°–8°
Remote Control Op
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–14° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
Specifications: 790–862 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1900–2180 MHz
Gain 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° T14.1 14.1 13.7 dBi 14.5 14.4 13.9 dBi 17.1 17.3 17.1 dBi 17.2 17.4 17.1 dBi 17.3 17.5 17.2
dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >32 dB (co-polar) >32 dB (co-polar) >32 dB (co-polar)
+45° and -45° polarization 68° (half-power) 65° (half-power) 65° (half-power) 62° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 16.5° (half-power) 15.3° (half-power) 7.4° (half-power) 7.1° (half-power) 6.7° (half-power)
vertical beamwidthElectrical downtilt 0°–14° 0°–14° 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° Tfirst sidelobe above main beam 17 16 15 dB 17 18 17 dB 17 17 16 dB 15 15 15 dB 16 16 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB
Maximum input power (at 50°C) 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)per combined input 450 watts (790–960 MHz and 1710–2180 MHz)
Tracking, average 1.0 dB 0.5 dB
Squint ±2.0° ±3.0°
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB
Weight 34.2 lb (15.5 kg)38.1 lb (17.3.kg) clamps included
Dimensions 52.5 x 10.3 x 5.7 inches(1334 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 126 lbf / 59 lbf / 135 lbf
(560 N) / (260 N) / (600 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 64.8 x 11.1 x 7.2 inches(1646 x 282 x 182 mm)
Shipping weight 43.7 lb (19.8 kg)
Integrated combiner The insertion loss is included in the givenantenna gain values.
11360-A936.3900/b
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 46/3650
742 223V02Dualband Panel Antenna with Integrated Combiner
XX- polarization
55.3 inches
(1405 mm)
52.5 inches(1334 mm)
53.8 inches(1367 mm)
2.625 inches ± 0.125
(68 mm ± 4)
C C
7-16 7-16
790–960–45
790–960+45
1710–2180–45
1710–2180+45
5.7 inches(146 mm)
10.3 inches(261 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 47/365
742 265V02
65°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0.5°–9.5°, 0°–6
Remote Control Op
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Dualband Panel AntennaXX- polarization
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >45 dB (typical)intersystem >50 dB (790–960 // 1710–2180 MHz)
Weight 44.1 lb (20 kg)48.5 lb (22.kg) clamps included
Dimensions 76.1 x 10.3 x 5.7 inches(1933 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 192 lbf / 86 lbf / 205 lbf
(850 N) / (380 N) / (910 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 88.8 x 11.1 x 7.2 inches(2256 x 282 x 182 mm)
Shipping weight 59.5 lb (27 kg)
11350-B936.3782/d
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain (average) 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T(dbi) 15.6 15.5 15.3 15.9 15.8 15.5 16.1 16.0 15.6 18.2 18.5 18.3 18.5 18.7 18.3 18.5 18.7 18.3
Front-to-back ratio >27 dB (co-polar) >28 dB (co-polar) >28 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-pola
Maximum input power 500 watts (per input) 250 watts (per input)(at 50°C) 1000 watts (total power) 500 watts (total power)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)vertical beamwidth 10.9° (half-power) 10.6° (half-power) 10° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tfirst sidelobe above main beam >15 16 17 dB >15 17 19 dB >15 18 19 dB >18 17 15 dB >18 18 16 dB >18 18 16 d(average)
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Tracking (average) 1.5 dB 0.5 dB
Squint ±2.5° ±2.5°
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 48/3652
742 265V02Dualband Panel Antenna
XX- polarization
10.3 inches(261 mm)
77.4 inches(1967 mm)
76.1 inches
(1933 mm)
78.9 inches
(2005 mm)
2.625 inches ± 0.125
(68 mm ± 4)
5.7 inches
(146 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
790–960+45
1710–2180–45
7-16 7-16
790– 960–45
7-16
1710–2180+45
7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 49/365
742 224V0
65°
790–960 MHz1710–2180 MH
XX-POLIntegrated Comb
Adjustable Electrical D
0.5°–9.5°, 0°–6
Remote Control Op
Dualband Panel Antenna with Integrated CombinerXX- polarization
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBWeight 44.1 lb (20 kg)
48.1 lb (21.8 kg) clamps included
Dimensions 76.1 x 10.3 x 5.7 inches(1933 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 192 lbf / 86 lbf / 205 lbf
(850 N) / (380 N) / (910 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 88.8 x 11.1 x 7.2 inches(2256 x 282 x 182 mm)
Shipping weight 56.9 lb (25.8 kg)
Integrated combiner The insertion loss is included in thegiven antenna gain values.
11361-A936.3860/d
790–960 MHz 1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Specifications: 790–862 MHz 880–960 MHz 1710–18 80 MHz 1850–1990 MHz 1900–2180 MHz
Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T15.6 15.5 15.3 dBi 16.1 16 15.6 dBi 18.2 18.5 18.3 dBi 18.5 18.7 18.3 dBi 18.5 18.7 18.3 dB
Front-to-back ratio >27 dB (co-polar) >28 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
+45° and -45° polarization 68° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 10.9° (half-power) 10° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Sidelobe suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam avg >15 16 17 dB >15 18 19 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB
Maximum input power (at 50°C)per input 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)combined input 450 watts (790–960 MHz and 1710–2180 MHz)
Tracking, average 1.5 dB 0.5 dB
Squint ±2.5° ±2.5°
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 50/3654
742 224V02Dualband Panel Antenna with Integrated Combiner
XX- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
78.9 inches
(2005 mm)
76.1 inches
(1933 mm)
77.4 inches
(1967 mm)
2.625 inches ± 0.125
(68 mm ± 4)
C C
7-16 7-16
790–960–45
790–960+45
1710–2180–45
1710–2180+45
5.7 inches(146 mm)
10.3 inches(261 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 51/365
742 266V0
65°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0°–7°, 0°–6°
Remote Control Op
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–7° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Dualband Panel AntennaXX- polarization
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >45 dBintersystem Typ. >50 dB (790–960 // 1710–2180 MHz)
Weight 52.9 lb (24 kg)57.3 lb (26 kg) clamps included
Dimensions 99.7 x 10.3 x 5.7 inches(2533 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 261 lbf / 113 lbf / 273 lbf
(1160 N) / (500 N) / (1210 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 112.4 x 11.1 x 7.2 inches(2856 x 282 x 182 mm)
Shipping weight 70.5 lb (32 kg)
11351-B936.3785/c
Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain (average) 0° 3° 7° T 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T(dbi) 16.6 16.6 16.5 17.0 16.9 16.7 17.0 17.1 16.9 18.2 18.5 18.3 18.5 18.7 18.3 18.5 18.7 18.3
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
Maximum input power 500 watts (per input) 250 watts (per input)(at 50°C) 1000 watts (total power) 500 watts (total power)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)vertical beamwidth 8° (half-power) 7.7° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)
Electrical downtilt 0°–7° 0°–7° 0°–7° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 3° 7° T 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tfirst sidelobe above main beam >17 17 15 dB >17 17 15 dB >18 17 15 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB(average)
Cross polar ratioMain direction 0° 30 dB (typical) 30 dB (typical) 30 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Tracking (average) 1 dB 0.5 dB
Squint ±2.5° ±2.5°
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 52/3656
742 266V02Dualband Panel Antenna
XX- polarization
10.3 inches
(261 mm)
101.1 inches
(2567 mm)
99.7 inches
(2533 mm)
102.6 inches
(2605 mm)
2.625 inches ± 0.125(68 mm ± 4)
5.7 inches
(146 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 Degrees downtilt angle.
Reference the Mechanical Accessories section.
790–960–45
790–960+45
7-16 7-16
1710–2180–45
7-16
1710–2180+45
7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 53/365
742 225V0
65°
790–960 MHz1710–2180 MH
XX-POLIntegrated Comb
Adjustable Electrical D
0°–7°, 0°–6°
Remote Control Op
Dualband Panel Antenna with Integrated CombinerXX- polarization
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB
Weight 52.9 lb (24 kg)56.9 lb (25.8.kg) clamps included
Dimensions 99.7 x 10.3 x 5.7 inches(2533 x 261 x 146 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 261 lbf / 113 lbf / 273 lbf
(1160 N) / (500 N) / (1210 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 112.4 x 11.1 x 7.2 inches(2856 x 282 x 182 mm)
Shipping weight 67.9 lb (30.8 kg)
Integrated combiner The insertion loss is included in thegiven antenna gain values.
11362-A936.3861/c
790–960 MHz 1710–2180 MHz
Horizontal pattern
±45°- polarization
Vertical pattern
±45°- polarization0°–7° electrical downtilt
Horizontal pattern
±45°- polarization
Vertical pattern
±45°- polarization0°–6° electrical downtilt
Profile PA2
Specifications: 790–862 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1900–2180 MHz
Gain 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T16.6 16.6 16.5 dBi 17 17.1 16.9 dBi 18.2 18.5 18.3 dBi 18.5 18.7 18.3 dBi 18.5 18.7 18.3
dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
+45° and -45° polarization 68° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 7.7° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)vertical beamwidth
Electrical downtilt 0°–7° 0°–7° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Sidelobe suppression for first 0° 4° 7° T 0° 4° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam avg >17 17 15 dB >18 17 15 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB
Cross polar ratioMain direction 0° 30 dB (typical) 30 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB
Maximum input power (at 50°C)per input 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)combined input 450 watts (790–960 MHz and 1710–2180 MHz)
Tracking, average 1.0 dB 0.5 dB
Squint ±2.5° ±2.5°
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 54/3658
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
742 225V02Dualband Panel Antenna with Integrated Combiner
XX- polarization
102.6 inches
(2605 mm)
99.7 inches(2533 mm)
101.1 inches(2567 mm)
2.625 inches ± 0.125
(68 mm ± 4)
C C
7-16 7-16
790–960–45
790–960+45
1710–2180–45
1710–2180+45
5.7 inches(146 mm)
10.3 inches(261 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 55/365
800 10665
65°
790–960 MHz1710–2690 MH
XX-POL
Adjustable Electrical D0°–10°, 0°–6°
Remote Control Op
Dualband Panel AntennaXX- polarization
General specifications:
Frequency range 790–960 MHz // 1710–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB (790–960 MHz)intrasystem >28 dB (1710–2690 MHz)intersystem >30 dB (790–960 // 1710–2690 MHz)
11312-A936.3955
790–960 MHz 1710–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Specifications: 790–866 MHz 824–896 MHz 880–960 MHz
Average gain (dBi) 16 16 15.5 16.1 16.1 15.6 16 16.2 15.6Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°
Front-to-back ratio >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)(180°±30°)
Maximum input power 500 watts (per input)(at 50°C) 1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 10.3° (half-power) 10.1° (half-power) 9.8° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10°
continuously adjustable(manual or optional remote control)
Min. suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 18 17 15 dB 18 18 16 dB 18 18 16 dB
Cross polar ratio (typical)Main direction 0° 22 dB 22 dB 22 dBSector ±60° >10 dB >10 dB >13 dB
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MHz
Average gain (dBi) 18.5 18.4 18.1 18.5 18.4 18.1 18.8 18.7 18.2 18.2 18.3 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
Maximum input power 200 watts (per input)(at 50°C) 400 watts (total power)
+45° and -45° polarization 62° (half-power) 63° (half-power) 62° (half-power) 63 ° (half-power)horizontal beamwidth
+45° and -45° polarization 4.5° (half-power) 4.4° (half-power) 4.1° (half-power) 3.5° (half-power)vertical beamwidth
Electrical downtilt 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)
Min. suppression for first 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam 17 16 16 dB 18 18 17 dB 18 17 17 dB 18 18 17 dB
Cross polar ratio (typical)Main direction 0° 18 dB 22 dB 23 dB 25 dBSector ±60° >10 dB >10 dB >10 dB >10 dB
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 56/3650
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10665Dualband Panel Antenna
XX- polarization
11.8 inches(300 mm)
78.6 inches(1997 mm)
2.625 inches ± 0.125(68 mm ± 4)
6 inches(152 mm)
79.8 inches(2027 mm)
81.4 inches(2067 mm)
Mechanical specifications:
Weight 52.9 lb (24 kg)57.3 lb (26 kg) clamps included
Dimensions 78.6 x 11.8 x 6 inches(1997 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 223 lbf / 86 lbf / 232 lbf
(990 N) / (380 N) / (1030 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 91.2 x 12.7 x 7.5 inches(2316 x 322 x 190 mm)
Shipping weight 63.9 lb (29 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)OD masts are included.
Layout of interface
790–960 1710–2690
RCU1710–2690
RCU790–960
–45° –45°+45° +45°
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 57/365
800 10666
65°
790–960 MHz1710–2690 MH
XX-POL
Adjustable Electrical D0.5°–9.5°, 0°–6
Remote Control Op
Dualband Panel AntennaXX- polarization
11372-A936.4069
790–960 MHz 1710–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
10
3
0
B d
B d
10
3
10
3
0
B d
B d
10
3
General specifications:
Frequency range 790–960 MHz // 1710–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB (790–960 MHz) intrasystem >28 dB (1710–2690 MHz) intersystem >30 dB (790–960 // 1710–2690 MHz)
Specifications: 790–866 MHz 824–896 MHz 880–960 MHz
Average gain (dBi) 16.8 16.7 16.5 17 17 16.8 17.1 17.2 17Tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
Maximum input power 500 watts (per input)(at 50°C) 1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 10.3° (half-power) 10.1° (half-power) 9.8° (half-power)vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°
continuously adjustable(manual or optional remote control)
Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tsidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 18 dB
Cross polar ratio (typical)Main direction 0° 24 dB 23 dB 22 dBSector ±60° >10 dB >10 dB >13 dB
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MHz
Average gain (dBi) 18.5 18.4 18.1 18.5 18.4 18.1 18.8 18.7 18.2 18.2 18.3 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
Maximum input power 200 watts (per input)(at 50°C) 400 watts (total power)
+45° and -45° polarization 62° (half-power) 63° (half-power) 62° (half-power) 63 ° (half-power)horizontal beamwidth
+45° and -45° polarization 4.5° (half-power) 4.4° (half-power) 4.1° (half-power) 3.5° (half-power)vertical beamwidth
Electrical downtilt 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)
Min. suppression for first 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam 17 16 16 dB 18 18 17 dB 18 17 17 dB 18 18 17 dB
Front-to-back ratio (copolar) >25 dB >25 dB >25 dB >25 dB
Cross polar ratio (typical)Main direction 0° 18 dB 22 dB 23 dB 25 dBSector ±60° >10 dB >10 dB >10 dB >10 dB
NE W
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 58/3652
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10666Dualband Panel Antenna
XX- polarization
11.8 inches(300 mm)
103.2 inches(2622 mm)
2.625 inches ± 0.125(68 mm ± 4)
6 inches(152 mm)
104.4 inches(2652 mm)
106 inches(2692 mm)
Mechanical specifications:
Weight 63.9 lb (29 kg)68.3 lb (31 kg) clamps included
Dimensions 103.2 x 11.8 x 6 inches(2622 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 286 lbf / 111 lbf / 297 lbf
(1270 N) / (490 N) / (1320 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 116.2 x 12.7 x 7.5 inches(2951 x 322 x 190 mm)
Shipping weight 72.8 lb (33 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)OD masts are included.
7-16 7-16
790–960
–45°
790–960
+45°
1710–2690
–45°
1710–2690
+45°
7-16 7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 59/365
Tripleband Panel AntennaXXX- polarization
800 10290V0
11328-B936.3930/a
65°
806–960 MHz1710–2180 MH1710–2180 MH
XXX - POL
Adjustable Electrical D0°–14°, 0°–14°, 0°–
Remote Control Op
Profile PA3
General specifications:
Frequency range 806–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >35 dB (806–960 // 1710–2180 MHz)intersystem >30 dB (1710–2180 // 1710–2180 MHz)
Weight 46.3 lb (21 kg)50.7 lb (23 kg) clamps included
Dimensions 60.6 x 10.3 x 5.9 inches(1540 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 108 lbf / 68 lbf / 158 lbf
(480 N / 300 N / 700 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 73.5 x 11.1 x 7.2 inches(1866 x 282 x 182 mm)
Shipping weight 57.3 lb (26 kg)
806–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–14° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–14° electrical downtilt
806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14(dbi) 14.4 14.3 14 14.6 14.4 14.2 14.9 14.7 14.4 bottom 14.5 14.5 14.2 14.8 14.8 14.5 15.1 14.8 14
top 14 14 13.7 14.4 14.3 13.9 14.9 14.8 14
Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB >25 dB >25 dBMaximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 watts
per input (at 50°C)
+45° and -45° polarizationhorizontal beamwidth 69° (half-power) 68° (half-power) 67° (half-power) 67° (half-power) 63° (half-power) 60° (half-power)vertical beamwidth 14.7° (half-power) 14.3° (half-power) 13.9° (half-power) 13.8° (half-power) 13.2° (half-power) 12.6° (half-powe
Electrical downtilt 0°–14° 0°–14° 0°–14° bottom 0°–14° 0°–14° 0°–14°continuously adjustable top 0°–14° 0°–14° 0°–14°
Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tfirst sidelobe above main beam 18 16 16 dB 18 16 16 dB 18 17 16 dB 18 16 15 dB 18 17 17 dB 18 16 17 d
Cross polar ratio (typical)Main direction 0° 25 dB 25 dB 25 dB 20 dB 20 dB 20 dBSector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 60/3654
800 10290V01
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–13 degrees downtilt angle.
Reference the Mechanical Accessories section.
Tripleband Panel AntennaXXX- polarization
10.3 inches(262 mm)
60.6 inches(1540 mm)
5.9 inches(149 mm)
63.9 inches(1623 mm)
62.3 inches(1583 mm)
2.625 inches ± 0.125(68 mm ± 4)
68.7 inches(1745 mm)
–45 –45
RCU
1710–2180 top system
1710–2180
790–960
RCURCU
–45 +45+45 +45
bottom system
Layout of interface
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 61/365
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–14° electrical downtilt
Vertical pattern±45°- polarization
2°–14° electrical downtilt
Horizontal pattern±45°- polarization
790–960 MHz
Horizontal pattern±45°- polarization
1710–1990 MHz
Vertical pattern±45°- polarization
0°–14° electrical downtilt
1920–2180 MHz
800 10291V0Tripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2180 MH1710–2180 MH
XXX-POL
Adjustable Electrical D2°–14°, 0°–14°, 0°–
Remote Control Op
Profile PA3
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >35 dB (790–960 // 1710–2180 MHz)
>30 dB (1710–2180 // 1710–2180 MHz)
Weight 59.2 lb (27 kg)63.9 lb (29 kg) clamps included
Dimensions 81 x 10.3 x 5.9 inches(2058 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 144 lbf / 90 lbf / 214 lbf
(640 N / 400 N / 950 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 93.9 x 11.1 x 7.2 inches(2385 x 282 x 182 mm)
11355-B936.3881/b
Specifications: 790–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dbi) 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T16.2 16 15.7 16.3 16.1 15.8 16.4 16.2 15.8 syst 1 15.9 15.9 15.5 16.2 16.2 15.7 16.3 16.3 15.8
syst 2 15.8 15.8 15.4 16.1 16.1 15.4 16.3 16.2 15.5
Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30)
Maximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 wattsper input (at 50°C)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 64° (half-power) 60° (half-power)vertical beamwidth 10° (half-power) 9.7° (half-power) 9.3° (half-power) 9.5° (half-power) 9° (half-power) 8.7° (half-power)
Electrical downtilt 2°–14° 2°–14° 2°–14° 0°–14° 0°–14° 0°–14°continuously adjustable (manual or optional remote control)
Sidelobe suppression forfirst sidelobe 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tabove main beam (dB) 17 17 15 17 17 16 17 17 16 18 17 17 18 17 17 18 17 17
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 18 dB (typical) 19 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
Tracking 1.0 dB 1.0 dB
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0
0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 62/3656
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10291V02Tripleband Panel Antenna
XXX- polarization
10.3 inches
(262 mm)
81 inches(2058 mm)
5.9 inches
(149 mm)
84.3 inches(2141 mm)
82.7 inches(2101 mm)
2.625 inches ± 0.125(68 mm ± 4)
–45 –45
RCU
1710–2180 top system
1710–2180
790–960
RCURCU
–45 +45+45 +45
bottom system
Layout of interface
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 63/365
800 10492VTripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2180 MH1710–2180 MH
XXX-POL
Adjustable Electrical D4°–12°, 0°–14°, 0°–
Remote Control Op
Profile PA3
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >36 dB (790–960 // 1710–2180 MHz)intersystem >36 dB (1710–2180 // 1710–2180 MHz)
Weight 75 lb (34 kg)79.4 lb (36 kg) clamps included
Dimensions 106.1 x 10.3 x 5.9 inches(2694 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 196 lbf / 117 lbf / 297 lbf
(870 N / 520 N / 1320 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 119.2 x 12 x 8 inches(3027 x 304 x 204 mm)
Shipping weight 86 lb (39 kg)
11336-B936.3952/a
1710–2180 MHz
Horizontal pattern
±45°- polarization
Vertical pattern
±45°- polarization0°–14° electrical downtilt
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
4°–12° electrical downtilt
Specifications: 790–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain (average) 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T(dbi) 16.6 16.5 16.3 17 16.9 16.5 17.2 17 16.7 bottom 16.1 16.3 16 16.7 16.8 16.3 17 17 16.6
top 16.1 16.1 15.8 16.7 16.5 16.2 17 16.9 16.4
Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30°)
Maximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 wattsper input (at 50°C)
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 66° (half-power) 65° (half-power) 63° (half-power) 60° (half-power)vertical beamwidth 7.5° (half-power) 7.4° (half-power) 7.2° (half-power) 7.8° (half-power) 7.6° (half-power) 7.2° (half-power)
Electrical downtilt 4°–12° 4°–12° 4°–12° 0°–14° 0°–14° 0°–14°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tfirst sidelobe above main beam 19 17 16 dB 19 18 18 dB 19 18 18 dB 18 17 15 dB 18 17 15 dB 18 17 15 dBwithin 0°–20° sector above horizon 15 15 14 dB 16 15 14 dB 16 15 14 dB 18 17 15 dB 17 17 15 dB 15 14 14 dB
Cross polar ratioMain direction 0° 23 dB (typical) 24 dB (typical) 25 dB (typical) 18 dB (typical) 18 dB (typical) 19 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 64/3658
10.3 inches(262 mm)
106.1 inches(2694 mm)
5.9 inches(149 mm)
109.3 inches(2777 mm)
107.8 inches(2737 mm)
2.625 inches ± 0.125(68 mm ± 4)
114 inches(2896 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10492V01Tripleband Panel Antenna
XXX- polarization
–45 –45
RCU
1710–2180 top system
1710–2180
790–960
RCURCU
–45 +45+45 +45
bottom system
Layout of interface
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 65/365
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
1710–2180 MHz
Vertical pattern±45°- polarization
2.5°–9.5° electrical downtilt
Horizontal pattern±45°- polarization
790–960 MHz
800 10292V0Tripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2180 MH1710–2180 MH
XXX-POL
Adjustable Electrical D2.5°–9.5°, 0°–10°, 0
Remote Control Op
Profile PA3
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female
Isolation intrasystem >30 dBintersystem >36 dB (790–960 // 1710–2180 MHz)>36 dB (1710–2180 // 1710–2180 MHz)
Weight 79.4 lb (36 kg)83.3 lb (38 kg) clamps included
Dimensions 106.1 x 10.3 x 5.9 inches(2694 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 196 lbf / 117 lbf / 297 lbf
(870 N / 520 N / 1320 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 119.1 x 11.1 x 7.2 inches(3026 x 282 x 182 mm)
11346-B936.3802/b
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Gain (dbi) 2.5° 6° 9.5° T 2.5° 6° 9.5° T 2.5° 6° 9.5° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T16.8 17.0 16.8 17.0 17.1 17.0 17.4 17.4 17.1 syst 1 16.5 16.7 16.5 17.0 17.1 16.7 17.3 17.4 16.8
syst 2 16.2 16.3 16.1 16.7 16.7 16.4 17.0 17.0 16.5
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >26 dB (co-polar) >26 dB (co-polar) >26 dB (co-polar
Maximum input power 250 watts 250 watts 250 watts 200 watts 200 watts 200 wattsper input (at 50°C)
+45° and -45° polarizationhorizontal beamwidth 69° (half-power) 68° (half-power) 66° (half-power) 65° (half-power) 64° (half-power) 60° (half-power)vertical beamwidth 7.8° (half-power) 7.6° (half-power) 7.1° (half-power) 7.4° (half-power) 7.2° (half-power) 6.8° (half-power)
Electrical downtilt 2.5°–9.5° 2.5°–9.5° 2.5°–9.5° 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 1st 2.5° 6° 9.5° T 2.5° 6° 9.5° T 2.5° 6° 9.5° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 17 16 14 dB 17 16 14 dB 17 16 14 dB 16 16 16 dB 16 17 16 dB 16 16 14 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB
±60° 20 dB average 20 dB average 17 dB average 14 dB average 16 dB average 16 dB average
Tracking (average) 1.0 dB syst 1 1.0 dBsyst 2 0.5 dB
Squint ±3.5° ±3.5°
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 66/3650
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10292V02Tripleband Panel Antenna
XXX- polarization
106.1 inches(2694 mm)
5.9 inches(149 mm)
109.3 inches(2777 mm)
107.8 inches(2737 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.3 inches(262 mm)
–45 +45
RCU
1710–21801710–2180
790–960
RCURCU
–45 +45–45 +45
bottom system 1top system 2
Layout of interface
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 67/365
800 10675Tripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2170 MH2490–2690 MH
XXX-POL
Adjustable Electrical D0°–10°, 0°–6°, 0°–
Remote Control Op
11370-A936.3879/b
Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MH
Gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°(dbi) 16 16 15.5 16.1 16.1 15.6 16 16.2 15.6 18 18 17.6 18 18 17.5 18.1 18.1 17.4 17.8 17.8 17.
Front-to-back ratio (180°±30°) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-pola
Maximum input powerper input (at 50°C) 500 watts 500 watts 500 watts 200 watts 200 watts 200 watts 200 wattstotal (at 50°C) 1000 watts 400 watts 400 watts
+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 62° (half-power) 63° (half-power) 62° (half-power) 63° (half-powevertical beamwidth 10.3° (half-power) 10.1° (half-power) 9.8° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power) 3.5° (half-powe
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable
Sidelobe suppression forfirst sidelobe above main beam 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°
dB 18 17 15 18 18 16 18 18 16 18 16 16 18 18 17 18 17 17 18 18 18
Cross polar ratio (typical)Main direction 0° (dB) 22 22 22 18 22 23 25Sector ±60° (dB) >10 dB >10 dB >10 dB >10 >10 >10 >10
Isolation intrasystem >30 dB >28 dB >28 dBintersystem >35 dB (790–960 // 1710–2170 // 2490–2690 MHz)
General specifications:
Frequency range 790–960 MHz1710–2170 MHz2490–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Weight 57.3 lb (26 kg)61.7 lb (28 kg) clamps included
Dimensions 78.6 x 11.8 x 6 inches(1997 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 230 lbf / 88 lbf / 237 lbf
(1020 N) / (390 N) / (1050 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 91.2 x 12.7 x 7.5 inches(2316 x 322 x 190 mm)
Shipping weight 68.3 lb (31 kg)
1710–2170 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
2490–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 68/3652
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10675Tripleband Panel Antenna
XXX- polarization
11.8 inches(300 mm)
78.6 inches(1997 mm)
6 inches
(152 mm)
81.4 inches(2067 mm)
79.8 inches(2027 mm)
2.625 inches ± 0.125(68 mm ± 4)
790–960+45
2490–2690–45
7-16 7-16
790–960–45
7-16
2490–2690+45
7-16
1710–2170–45
7-16
1710–2170+45
7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 69/365
800 10692Tripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2690 MH1710–2690 MH
XXX-POL
Adjustable Electrical D2°–10°, 0°–10°, 0°–
Remote Control Op
11314-FRO936.A2779/b
1710–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
2°–10° electrical downtilt
10
3
0
B d
B d
10
3
10
3
0
B d d
B
10
3
0
General specifications:
Frequency range 790–960 MHz // 1710–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB (790–960 MHz)
>28 dB (1710–2690 MHz) intersystem >40 dB (790–960 // 1710–2690 MHz)
>30 dB (1710–2690 // 1710–2690 MHz)
Specifications: 790–866 MHz 824–896 MHz 880–960 MHz
Average gain (dBi) tilt 2° 5° 10° 2° 5° 10° 2° 5° 10°16.6 16.6 16.5 16.9 17 16.8 17.3 17.4 17.2
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
Maximum input power 500 watts (per input)(at 50°C) 1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.5° (half-power) 7.3° (half-power) 7° (half-power)vertical beamwidth
Electrical downtilt 2°–10° 2°–10° 2°–10°
continuously adjustable(manual or optional remote control)
Min. suppression for first 2° 5° 10° T 2° 5° 10° T 2° 5° 10° Tsidelobe above main beam 18 16 14 dB 18 16 15 dB 18 17 16 dB
Front-to-back ratio (copolar) >25 dB >25 dB >25 dB
Cross polar ratio (typical)Main direction 0° 28 dB 30 dB 32 dBSector ±60° >10 dB >10 dB >10 dB
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz 2490–2690 MHz
Average gain (dBi) tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°bottom system 17 16.8 16.5 17.5 17.3 17 17.7 17.5 17.2 17.5 17.2 17top system 16.6 16.4 16.1 17.1 16.9 16.6 17.3 17.1 16.8 17 16.7 16.5
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
Maximum input power 200 watts (per input)
(at 50°C) 400 watts (total power)+45° and -45° polarization 67° (half-power) 65° (half-power) 63° (half-power) 62° (half-power)horizontal beamwidth
+45° and -45° polarization 7.1° (half-power) 6.7° (half-power) 6.3° (half-power) 5.4° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable(manual or optional remote control)
Min. suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T
sidelobe above main beam 16 16 15 dB 16 16 15 dB 16 16 15 dB 16 16 15 dB
Front-to-back ratio (copolar) >25 dB >25 dB >25 dB >25 dB
Cross polar ratio (typical)Main direction 0° 16 dB 18 dB 18 dB 20 dBSector ±60° >10 dB >10 dB >10 dB >10 dB
NE W
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 70/3654
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10692Tripleband Panel Antenna
XXX- polarization
11.8 inches(299 mm)
102.4 inches(2593 mm)
2.625 inches ± 0.125(68 mm ± 4)
6 inches
(152 mm)
103.4 inches
(2627 mm)
105 inches
(2667 mm)
Mechanical specifications:
Weight 72.8 lb (33 kg)76.7 lb (34.8 kg) clamps included
Dimensions 102.1 x 12.1 x 6.3 inches(2593 x 308 x 160 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 297 lbf / 120 lbf / 315 lbf
(1320 N) / (530 N) / (1400 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)Shipping dimensions 113.9 x 13.8 x 7.6 inches
(2892 x 330 x 192 mm)
Shipping weight 81.6 lb (37 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)OD masts are included.
1710–2690+45
1710–2690–45
7-16 7-16
1710–2690–45
7-16
1710–2690+45
7-16
790– 960–45
7-16
790–960+45
7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 71/365
800 10676Tripleband Panel AntennaXXX- polarization
65°
790–960 MHz1710–2170 MH2490–2690 MH
XXX-POL
Adjustable Electrical D0°–10°, 0°–6°, 0°–
Remote Control Op
11373-A936.4045
General specifications:
Frequency range 790–960 MHz // 1710–2170 MHz // 2490–2690 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 6 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dB (790–960 MHz)
intrasystem >28 dB (1710–2170 MHz) (2490–2690 MHz)intersystem >30 dB (790–960 // 1710–2690 MHz // 2490–2690 MHz)
1710–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
Specifications: 790–862 MHz 824–896 MHz 880–960 MHz
Average gain (dBi) 16.8 16.7 16.5 17 17 16.8 17.1 17.2 17Tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
Maximum input power 500 watts (per input)(at 50°C) 1000 watts (total power)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.5° (half-power) 7.4° (half-power) 7.1° (half-power)vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°
continuously adjustable(manual or optional remote control)
Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tsidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 16 dB
Cross polar ratio (typical)Main direction 0° 24 dB 23 dB 22 dBSector ±60° >10 dB >10 dB >10 dB
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MHz
Average gain (dBi) 18 16 16 18 18 17 18 17 17 18 18 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
Maximum input power 200 watts (per input)(at 50°C) 400 watts (total power)
+45° and -45° polarization 62° (half-power) 63° (half-power) 62° (half-power) 63 ° (half-power)horizontal beamwidth
+45° and -45° polarization 4.8° (half-power) 4.6° (half-power) 4.4° (half-power) 3.5° (half-power)vertical beamwidth
Electrical downtilt 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)
Min. suppression for first 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam 18 16 16 dB 18 18 17 dB 18 17 17 dB 18 18 18 dB
Cross polar ratio (typical)Main direction 0° 18 dB 22 dB 23 dB 25 dBSector ±60° >10 dB >10 dB >10 dB >10 dB
NE W
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3
0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 72/3656
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10676Tripleband Panel Antenna
XXX- polarization
11.8 inches
(300 mm)
103.2 inches
(2622 mm)
2.625 inches ± 0.125(68 mm ± 4)
6 inches
(152 mm)
104.4 inches(2652 mm)
106 inches(2692 mm)
Mechanical specifications:
Weight 68.3 lb (31 kg)72.8 lb (33 kg) clamps included
Dimensions 103.2 x 11.8 x 6 inches(2622 x 300 x 152 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 311 lbf / 117 lbf / 335 lbf
(1380 N) / (520 N) / (1490 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 116.2 x 12.7 x 7.5 inches(2951 x 322 x 190 mm)
Shipping weight 77.2 lb (35 kg)
Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)OD masts are included.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 73/365
88°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0.5°–12.5°, 0.5°–
Remote Control Op
800 10121V
General specifications:
Frequency range 790–960 MHz / 1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >42 dB (790–960 // 1710–2180 MHz)
Weight 46.3 lb (21 kg)50.7 lb (23 kg) clamps included
Dimensions 54.5 x 10.3 x 5.9 inches(1384 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 95 lbf / 59 lbf / 140 lbf
(420 N / 260 N / 620 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 67.6 x 12 x 8 inches(1716 x 304 x 204 mm)
Shipping weight 55.1 lb (25 kg)
11356-B936.3959/a
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–12.5° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–10° electrical downtilt
Dualband Panel AntennaXX- polarization
Specifications: 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dBi) 13.4 13.4 13.1 13.6 13.6 13.4 13.9 13.8 13.5 16.4 16.4 16.2 16.4 16.5 16 16.4 15.9 15.3Tilt 0.5° 6° 12° 0.5° 6° 12° 0.5° 6° 12° 0.5° 5° 10° 0.5° 5° 10° 0.5° 5° 10°
Front-to-back ratio >23 dB (co-polar) >23 dB (co-polar) >23 dB (co-polar) >23 dB (co-polar) >23 dB (co-polar) >23 dB (co-pola
Maximum input powerper input (at 50°C) 500 watts 500 watts 500 watts 250 watts 250 watts 250 wattstotal power 1000 watts 500 watts
+45° and -45° polarization 88° (half-power) 86° (half-power) 88° (half-power) 82° (half-power) 85° (half-power) 90° (half-power)horizontal beamwidth
+45° and -45° polarization 15° (half-power) 14.5° (half-power) 14° (half-power) 7° (half-power) 6.6° (half-power) 6.4° (half-powervertical beamwidth
Electrical downtilt 0.5°–12.5° 0.5°–12.5° 0.5°–12.5° 0.5°–10° 0.5°–10° 0.5°–10°continuously adjustable(manual or optional remote control)
Min. sidelobe suppressionfor first sidelobe 0.5° 6° 12° T 0.5° 6° 12° T 0.5° 6° 12° T 0.5° 5° 10° T 0.5° 5° 10° T 0.5° 5° 10° Tabove main beam 16 14 14 dB 16 15 14 dB 18 16 16 dB 17 17 16 dB 17 18 16 dB 18 16 16 dBaverage 20 19 16 dB 20 18 17 dB 22 20 20 dB 20 20 18 dB 21 22 17 dB 20 20 16 dB
Front-to-back ratio (copolar) >23 dB >23 dB >23 dB >23 dB >23 dB >23 dB
Cross polar ratio (typical)Main direction 0° 17 dB 18 dB 20 dB 17 dB 16 dB 15 dBSector ±60° >10 dB >10 dB >13 dB >10 dB >12 dB >10 dBaverage ±60° 16 dB 16 dB 19 dB 17 dB 19 dB 19 dB
Profile PA3
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 74/3658
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10121V01Dualband Panel Antenna
XX- polarization
10.3 inches
(262 mm)
57.8 inches
(1467 mm)
54.5 inches
(1384 mm)
56.2 inches
(1427 mm)
5.9 inches
(149 mm)
2.625 inches ± 0.125
(68 mm ± 4)
RCU790–960
790–960
1710–2180
RCU1710–2180
Layout of interface
–45° +45°
–45° +45°
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 75/365
Specifications: 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dBi) 14.8 14.8 14.8 14.8 15 14.8 14.9 15.1 14.9 17.7 17.8 17.7 17.7 18 17.6 17.6 17.8 17.4Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio (180°±30°) >23 dB >23 dB >23 dB >23 dB >23 dB >23 dB
Maximum input power (at 50°C)per input 500 watts 500 watts 500 watts 250 watts 250 watts 250 wattstotal 1000 watts 500 watts
+45° and -45° polarization 88° (half-power) 87° (half-power) 88° (half-power) 82° (half-power) 85° (half-power) 90° (half-power)horizontal beamwidth
+45° and -45° polarization 11° (half-power) 10.9° (half-power) 10.5° (half-power) 5.5° (half-power) 5.2° (half-power) 5° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)
Min. sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T1st sidelobe above main beam 18 16 14 dB 16 16 15 dB 16 16 15 dB 18 18 16 dB 18 18 16 dB 18 18 16 dB
Cross polar ratio (typical)Main direction 0° 18 dB 18 dB 20 dB 17 dB 16 dB 15 dBSector ±60° >10 dB >10 dB >13 dB >10 dB >12 dB >10 dBaverage ±60° 16 dB 16 dB 19 dB 17 dB 19 dB 19 dB
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >42 dB (790–960 // 1710–2180 MHz)
Weight 59.5 lb (27 kg)63.9 lb (29 kg) clamps included
Dimensions 75.5 x 10.3 x 5.9 inches(1917 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 131 lbf / 81 lbf / 196 lbf
(580 N / 360 N / 870 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 88.5 x 12 x 8 inches(2249 x 304 x 204 mm)
Shipping weight 70.6 lb (32 kg)
88°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0°–10°, 0°–6°
Remote Control Op
800 10122V
790–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Dualband Panel AntennaXX- polarization
11359-A936.3960/b
Profile PA3
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 76/3650
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10122V01Dualband Panel Antenna
XX- polarization
10.3 inches(262 mm)
78.7 inches(2000 mm)
75.5 inches(1917 mm)
77.2 inches(1960 mm)
5.9 inches(149 mm)
2.625 inches ± 0.125(68 mm ± 4)
RCU790–960
790–960
1710–2180
RCU1710–2180
Layout of interface
–45° +45°
–45° +45°
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 77/365
800 10123V
88°
790–960 MHz1710–2180 MH
XX-POL
Adjustable Electrical D0.5°–7°, 0°–6°
Remote Control Op
Dualband Panel AntennaXX- polarization
Profile PA3
General specifications:
Frequency range 790–960 MHz1710–2180 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >45 dB (790 –960 // 1710–2180 MHz)
Weight 72.8 lb (33 kg)76.7 lb (34.8.kg) clamps included
Dimensions 103.7 x 10.3 x 5.9 inches(2635 x 262 x 149 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 189 lbf / 115 lbf / 284 lbf
(840 N) / (510 N) / (1260 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 116.8 x 11.1 x 7.2 inches(2966 x 282 x 182 mm)
1710–2180 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–6° electrical downtilt
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–7° electrical downtilt
790–960 MHz
Specifications: 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dBi) 16.1 16.2 16.1 16.3 16.4 16.3 16.5 16.6 16.5 17.8 17.7 17.4 18 17.9 17.4 17.9 17.8 17.3Tilt 0.5° 4° 7° 0.5° 4° 7° 0.5° 4° 7° 0° 3° 6° 0° 3° 6° 0° 3° 6°
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >23 dB (co-polar) >23 dB (co-polar) >23 dB (co-pola
+45° and -45° polarization 86° (half-power) 86° (half-power) 86° (half-power) 84° (half-power) 85° (half-power) 88° (half-power)horizontal beamwidth
+45° and -45° polarization 7.3° (half-power) 7.2° (half-power) 6.9° (half-power) 4.8° (half-power) 4.5° (half-power) 4.2° (half-power
vertical beamwidthElectrical downtilt 0.5°–7° 0.5°–7° 0.5°–7° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)
Vertical Pattern–Min. sidelobe 0.5° 4° 7° T 0.5° 4° 7° T 0.5° 4° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsuppression for first 15 14 14 dB 15 14 14 dB 15 14 15 dB 18 17 16 dB 18 17 17 dB 18 16 17 dBsidelobe above main beam
Cross polar ratio (typical)Main direction 0° 18 dB 18 dB 20 dB 16 dB 16 dB 15 dBSector ±60° >10 dB >10 dB >13 dB >10 dB >12 dB >10 dBaverage ±60° 16 dB 16 dB 19 dB 16 dB 17 dB 18 dB
Maximum input power 806–960 MHz 1710–2180 MHzper input (at 50°C) 500 watts 250 wattstotal (at 50°C) 1000 watts 500 watts
Tracking, average 0.5 dB 0.5 dB
Squint ±3° ±3°
11363-A936.4017/a
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PA3
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 78/3652
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10123V03Dualband Panel Antenna
XX- polarization
10.3 inches(262 mm)
107 inches(2717 mm)
103.7 inches(2635 mm)
105.4 inches
(2677 mm)
5.9 inches(149 mm)
2.625 inches ± 0.125(68 mm ± 4)
RCU790–960
790–960
1710–2180
RCU1710–2180
Layout of interface
–45° +45°
–45° +45°
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 79/365
Dualband Panel Antenna with Integrated CombinerV- polarization
742 290
90°
824–960 MHz1710–2170 MH
V-POL
Integrated Comb
0° Electrical Down
General specifications:
Frequency range 824–960 MHz1710–2170 MHz
VSWR824–960 MHz <1.7:1870–960 MHz <1.5:11710–2170 MHz <1.7:11710–1990 MHz <1.5:1
Gain 7 dBi
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization Vertical / Vertical
Front-to-back ratio824–960 MHz >18 dB1710–2170 MHz >20 dB
Maximum input power 100 watts (at 50°C)
H-plane beamwidth824–960 MHz 90 degrees (half-power)1710–2170 MHz 82 degrees (half-power)
E-plane beamwidth824–960 MHz 60 degrees (half-power)1710–2170 MHz 70 degrees (half-power)
Connector 1 x 7-16 DIN female
Weight 6.2 lb (2.8 kg)
Dimensions 12.9 x 6.1 x 2.7 inches
(328 x 155 x 69 mm)Wind load at 93 mph (150kph)Front/Side/Rear 21 lbf / 6 lbf / 23 lbf
(90 N / 23 N / 100 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 17.5 x 6.8 x 3.6 inches(444 x 172 x 92 mm)
Shipping weight 7.7 lb (3.5 kg)
10779-E936.2424/c
824–960 MHz
1710–2170 MHz
H - PlaneHorizontal pattern
Vertical - polarization
E - PlaneVertical pattern
Vertical - polarization
824-960VPol
1710-2170
VPol
7-16
C
12.9 inches(328 mm)
15 inches(382 mm)
6.1 inches(155 mm)
16.2 inches(412 mm)
2.7 inches
(69 mm)
H - PlaneHorizontal pattern
Vertical - polarization
E - PlaneVertical pattern
Vertical - polarization
Profile PF5
Mounting Equipment:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(34 to 60 mm) OD mast.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 80/3654
Dualband Panel Antenna with Integrated CombinerV- polarization
800 10046
General specifications:
Frequency range 824–960 MHz1710–2170 MHz
VSWR824–960 MHz <1.7:1870–960 MHz <1.5:11710–2170 MHz <1.5:1
Gain824–960 MHz 10 dBi1710–2170 MHz 11 dBi
Impedance 50 ohmsIntermodulation (2x20w) IM3: <-150 dBc
Polarization Vertical / Vertical
Front-to-back ratio824–960 MHz >18 dB1710–2170 MHz >20 dB
Maximum input power 100 watts (at 50°C)
H-plane beamwidth824–960 MHz 90 degrees (half-power)1710–2170 MHz 82 degrees (half-power)
E-plane beamwidth824–960 MHz 33 degrees (half-power)1710–2170 MHz 19 degrees (half-power)
Connector 1 x 7-16 DIN female
Weight 11 lb (5 kg)
Dimensions 26.1 x 6.1 x 2.7 inches(662 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 40 lbf / 11 lbf / 45 lbf
(175 N / 47 N / 200 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 31.7 x 6.8 x 3.6 inches(804 x 172 x 92 mm)
10780-E936.2500/c
824-960
VPol1710-2170
VPol
7-16
C
1710–2170 MHz
H - PlaneHorizontal pattern
Vertical - polarization
E - PlaneVertical pattern
Vertical - polarization
824–960 MHz
H - PlaneHorizontal pattern
Vertical - polarization
E - PlaneVertical pattern
Vertical - polarization
90°
824–960 MHz1710–2170 MHz
V-POL
0° Electrical Downtilt
Profile PF5
6.1 inches(155 mm)
26.1 inches
(662 mm)
29.4 inches(746 mm)
2.7 inches(69 mm)
28.2 inches(716 mm)
2.5 inches
(64 mm)
Mounting Equipment:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(34 to 60 mm) OD mast.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 81/365
Dualband 700 MHz Trisector AntennaXX- polarization with or without Integrated Combiner
840 10515, 840 1051
840 10517, 840 1051General specifications:
Frequency range 698–894 MHz1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° upper and lower band-45° upper and lower band
Connector 12 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >40 dB (698–894 // 1710–2170 MHz)
Combiner With or without integrated combiner
Radome color Brown or grey
Weight 50 lb (22.7 kg)
Height 24 inches (609 mm)
Radome diameter 16 inches (407 mm)
Wind load at 93 mph (150kph)Side 32 lbf (138 N)
Wind survival rating 100 mph (160 kph)
Shipping dimensions 32 x 20 x 19 inches(813 x 508 x 483 mm)
Shipping weight 52 lb (23.6 kg)
698–960 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
1710–2170 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
Specifications : 698–806 MHz 806–894 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 10.4 dBi 11.6 dBi 13.5 dBi 13.5 dBi 13.2 dBi
Front-to-back ratio >24 dB (co-polar) >26 dB (co-polar) >32 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >18 dB (total power) >20 dB (total power) >24 dB (total power) >26 dB (total power) >25 dB (total power)
Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 71° (half-power) 65° (half-power) 60° (half-power) 62° (half-power) 64° (half-power)horizontal beamwidth
+45° and -45° polarization 37° (half-power) 31° (half-power) 19° (half-power) 17.5° (half-power) 17.5° (half-power)vertical beamwidth
Cross polar ratioMain direction 0° 18 dB 25 dB 20 dB 22 dB 25 dBSector (typical) ±60° >8 dB >8 dB >9 dB >9 dB >12 dB
11204-C
698–894 MHz1710–2170 MH
XX-POL
0° Electrical Down
24 inches(609 mm)
26.8 inches(682 mm)
Arrows indicate the direction
of maximum signal strength
Mounting Equipment:
Designed to be mounted on top of a utilitypole using a custom mounting bracket
supplied by the customer.
13.9 inches(353 mm)
16 inches(407 mm)
Order Information:Model Description
840 10515 Brown Trisector Antenna
840 10516 Grey Trisector Antenna
840 10517 Brown Trisector Antenna with Combiner
840 10518 Grey Trisector Antenna with Combiner
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3
3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3
3 0
3020163 61020
3
6
10
20
BdBd
dB
%
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 82/3656
Dualband 700 MHz Omnidirectional Antennawith or without Integrated Combiner X- polarization
840 10510, 840 10511
840 10512, 840 10513Omnidirectional
698–894 MHz1710–2170 MHz
X-POL
0° Electrical Downtilt
General specifications:
Frequency range 698–894 MHz1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° upper and lower band-45° upper and lower band
Connector 2 or 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >40 dB (698–894 // 1710–2170 MHz)
Combiner With or without integrated combiner
Radome color Brown or grey
Weight 45 lb (20.4 kg)
Height 24 inches (609 mm)
Radome diameter 16 inches (407 mm)
Wind load at 93 mph (150kph)Side 32 lbf (138 N)
Wind survival rating 100 mph (160 kph)
Shipping dimensions 32 x 20 x 19 inches(813 x 508 x 483 mm)
Shipping weight 52 lb (23.6 kg)
11202-D
698–894 MHz
1710–2170 MHz
Horizontal pattern±45°- polarization
880 MHz
Vertical pattern±45°- polarization
880 MHz
Horizontal pattern±45°- polarization
1945 MHz
Vertical pattern±45°- polarization
1945 MHz
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
24 inches(609 mm)
26.8 inches(682 mm)
13.9 inches(353 mm)
16 inches(407 mm)
Arrows indicate the direction
of maximum signal strength
Order Information:
Model Description
840 10510 Brown Omni Antenna
840 10511 Grey Omni Antenna
840 10512 Brown Omni Antenna with Combiner
840 10513 Grey Omni Antenna with Combiner
Specifications: 698–806 MHz 806–894 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain (typical) 4.5 dBi 6.5 dBi 9 dBi 9 dBi 8.5 dBi
Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 37° (half-power) 30° (half-power) 19° (half-power) 17° (half-power) 17.5° (half-power)vertical beamwidth
Mounting Equipment:
Designed to be mounted on top of autility pole using a custom mountingbracket supplied by the customer.
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 83/365
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
30° 806–960 MHz 18.5 dBi 800 10141 0° +45° and -45° 51 inches 82
790–960 MHz 20.2 dBi 800 10643 0°– 10° ADT* +45° and -45° 88.7 inches 81
790–960 MHz 20.4 dBi 800 10456 0° +45° and -45° 88.7 inches 83
65° 806–960 MHz 9 dBi 739 619 0° +45° and -45° 10.1 inches 97
806–960 MHz 12.5 dBi 739 620 0° +45° and -45° 25.8 inches 98
698–894 MHz 14.2 dBi 800 10734 0°– 16° ADT* +45° and -45° 53.3 inches 69
790–960 MHz 14.7 dBi 800 10207V01 6° +45° and -45° 50.9 inches 99
790–960 MHz 14.7 dBi 800 10303V02 0°– 14° ADT* +45° and -45° 50.9 inches 84
790–960 MHz 14.7 dBi 800 10202V02 0° +45° and -45° 50.9 inches 102
698–894 MHz 15.5 dBi 800 10735 0°– 10° ADT* +45° and -45° 76.1 inches 71
824–960 MHz 15.5 dBi 800 10516V01 0°– 10° ADT* 2 x +45° and -45° 79.7 inches 85
790–960 MHz 16.2 dBi 800 10634V01 0°– 10° ADT* +45° and -45° 76.1 inches 86
824–960 MHz 16.5 dBi 800 10517V01 0°– 8° ADT* 2 x +45° and -45° 103.6 inches 87
698–894 MHz 16.4 dBi 800 10736 0°– 10° ADT* +45° and -45° 96 inches 73
790–960 MHz 16.5 dBi 800 10294V02 6° +45° and -45° 76.1 inches 101
790–960 MHz 16.6 dBi 800 10203V02 0° +45° and -45° 76.1 inches 101
790–960 MHz 16.9 dBi 800 10305V02 0°– 8° ADT* +45° and -45° 88.7 inches 88
790–960 MHz 17.1 dBi 800 10306V02 0.5°– 9.5° ADT* +45° and -45° 101.3 inches 89
790–960 MHz 17 dBi 800 10647V01 0°– 8° ADT* 2 x +45° and -45° 88.7 inches 90
790–960 MHz 17.5 dBi 800 10307V01 0.5°– 9.5° ADT* +45° and -45° 101.3 inches 91
790–960 MHz 17.5 dBi 800 10204V02 0° +45° and -45° 88.7 inches 103
790–960 MHz 17.8 dBi 800 10214V01 9° +45° and -45° 101.3 inches 106
790–960 MHz 17.9 dBi 800 10215V01 0° +45° and -45° 101.3 inches 104
790–960 MHz 17.9 dBi 800 10208V01 6° +45° and -45° 101.3 inches 105
85° 790–960 MHz 13.3 dBi 800 10308V01 0°–14° ADT* +45° and -45° 50.9 inches 92
698–894 MHz 13.5 dBi 800 10701 0°–16° ADT* +45° and -45° 53.3 inches 75
698–894 MHz 14.6 dBi 800 10702 0°–10° ADT* +45° and -45° 76.1 inches 77
698–894 MHz 15.7 dBi 800 10703 0°–10° ADT* +45° and -45° 96 inches 79
790–960 MHz 14.9 dBi 800 10309V01 0°–10° ADT* +45° and -45° 76.1 inches 93
790–960 MHz 16 dBi 800 10310V01 0.5°–9.5° ADT* +45° and -45° 101.3 inches 94
790–960 MHz 16.5 dBi 800 10218V01 6° +45° and -45° 101.3 inches 108
790–960 MHz 16.7 dBi 800 10217V01 0° +45° and -45° 101.3 inches 107
88° 824–960 MHz 16.5 dBi 800 10518V01 0°– 8° ADT* 2 x +45° and -45° 103.4 inches 96
698-960 MHz • X Polarization
*ADT - Adjustable Electrical Downtilt
700 and 800 MHz X-POL Panel Antennas
67
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 84/365
A N T E N N A S
Kathrein’s advanced antennas for 698-960 MHz feature
cross-polarized (X-Pol) radiation systems, offering the benefits of
diversity operation but without the physical requirements of a space
diversity implementation.
Many include fully adjustable down-tilt (ADT), allowing site
optimization without replacing antennas, and may be equipped for
optional remote downtilt control.
Kathrein’s advanced antennas for 706-960 MHz have beamwidths
from 30° to 90°, and gain specifications from 9 dBi to 19 dBi.
698–960 MHz X-POL
698–960 MHz X-Polarization Panel Antennas
68
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 85/365
698–894 MHz Panel AntennaX- polarization 800 10734
11219-A936.4130
65°
698–894 MHz
X - POL
Adjustable Electrical D0°–16°
Internal Remote Co
Vertical pattern±45°- polarization
0°–16° electrical downtilt
Horizontal pattern±45°- polarization
General specifications:
Frequency range 698–894 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)(bottom mounted)
Isolation >30 dB
Electrical downtilt 0–16 degrees (continuously adjustable)
Specifications: 698–806 MHz 824–894 MHz
Gain 14.2 dBi 14.8 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar)32 dB (average) 33 dB (average)
+45° and -45° polarization 68° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 16° (half-power) 14.8° (half-power)vertical beamwidth
Min. sidelobe suppression for 0° 8° 16° T 0° 8° 16° Tfirst sidelobe above main beam 16 17 17 dB 18 17 16 dBaverage 19 20 20 dB 25 23 23 dB
Cross polar ratioMain direction 0° 24 dB (typical) 23 dB (typical)
Sector ±60° >10 dB, Average: 15 dB >10 dB, Average: 16 dB
IRT specifications:
Logical interface ex factory1 AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out
Power supply 10–30 V
Power consumption <1 watt (standby)<8.5 watts (motor activated)
Adjustment time (full range) 40 sec.
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Mechanical specifications:
Weight 24.3 lb (11 kg)28.7 lb (13 kg) clamps included36.8 lb (16.7 kg) clamps and tilt kit included
Dimensions H x W x D 53.3 x 11.9 x 3.9 inches (1355 x 303 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 140 lbf / 45 lbf / 160 lbf
(620 N) / (200 N) / (710 N)Mounting category M (Medium)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 56.3 x 12.4 x 4.5 inches (1430 x 315 x 115 mm)
Shipping weight 33.1 lb (15 kg)
Mounting bracket 2-point hot-dip galvanized with(included) stainless steel hardware for 2 to 4.5 inch
(50 to 115 mm) OD masts.
698–894 MHz
0
3 0
6 0
90
1 2 0
1 5 0
180 2
1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1) The protocol of the logical interface can beswitched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 is possible inan RET system supporting AISG 1.1 or supporting3GPP/AISG 2.0 after performing a layer 2 resetbefore address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter"3GPP" into the additional data filed "Installer’sID" and perform a layer 7 reset or a power reset.3GPP to AISG 1.1: Enter "AISG 1" into theadditional datafield "Installer’s ID" and perform alayer 2 reset or a power reset. After switching theprotocol any other information can be entered intothe "Installer’s ID" field.
2) The tightning torque for fixing the connector mustbe 0.5 – 1.0 Nm (‘hand-tightened’). The connectorshould be tightened by hand only!
Profile PC3
Mounting Clamps Included
Order Information:
Model Description
800 10734 Antenna with 738 546 mounting brackets0°–16° electrical downtilt
800 10734 K Antenna with 738 546 mounting bracketsand 850 10013 mechanical tilt bracket0°–16° electrical downtilt
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 86/3650
698–894–45
7-16
698–894+45
7-16
IRTin out
8pinmale
8pinfemale
11.9 inches(303 mm)
53.3 inches(1355 mm)
2.625 inches ± 0.125(68 mm ± 4)
3.9 inches(99 mm)
Note: Refer to part number
860 10149 for the
specifications of theremote control actuator.
55.4 inches
(1406 mm)
56.9 inches
(1446 mm)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interferencereceived, including interference that may cause
undesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
698–894 MHz Panel AntennaX- polarization
800 10734
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 87/365
698–894 MHz Panel AntennaX- polarization 800 10735
11220-B936.4131
65°
698–894 MHz
X - POL
Adjustable Electrical D0°–10°
Internal Remote Co
General specifications:
Frequency range 698–894 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)(bottom mounted)
Isolation >30 dB
Electrical downtilt 0–10 degrees (continuously adjustable)
Specifications: 698–806 MHz 824–894 MHz
Gain 15.5 dBi 16 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar)35 dB (average) 35 dB (average)
+45° and -45° polarization 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 11.3° (half-power) 10° (half-power)vertical beamwidth
Min. sidelobe suppression for 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 17 17 dB 18 17 16 dBaverage 16 19 20 dB 20 20 20 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical)
Sector ±60° >11 dB, Average: 15 dB >11 dB, Average: 15 dB
IRT specifications:
Logical interface ex factory1 AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out
Power supply 10–30 V
Power consumption <1 watt (standby)<8.5 watts (motor activated)
Adjustment time (full range) 40 sec.
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Mechanical specifications:
Weight 28.7 lb (13 kg)33.1 lb (15 kg) clamps included46.1 lb (20.9 kg) clamps and tilt kit included
Dimensions H x W x D 76.1 x 11.9 x 3.9 inches (1934 x 303 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 203 lbf / 70 lbf / 239 lbf
(900 N / 310 N / 1060 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 81.1 x 12.4 x 4.5 inches (2060 x 315 x 115 mm)
Shipping weight 37.5 lb (17 kg)
Mounting bracket 2-point hot-dip galvanized with(included) stainless steel hardware for 2 to 4.5 inch
(50 to 115 mm) OD masts.
Order Information:
Model Description
800 10735 Antenna with 738 546 mounting brackets0°–10° electrical downtilt
800 10735 K Antenna with 738 546 mounting bracket and850 10007 mechanical tilt bracket0°–10° electrical downtilt
Reference the Mechanical Accessories section.
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
698–894 MHz
1) The protocol of the logical interface can beswitched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 is possible inan RET system supporting AISG 1.1 or supporting3GPP/AISG 2.0 after performing a layer 2 resetbefore address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter"3GPP" into the additional data filed "Installer’sID" and perform a layer 7 reset or a power reset.3GPP to AISG 1.1: Enter "AISG 1" into theadditional datafield "Installer’s ID" and perform alayer 2 reset or a power reset. After switching theprotocol any other information can be entered intothe "Installer’s ID" field.
2) The tightning torque for fixing the connector mustbe 0.5 – 1.0 Nm (‘hand-tightened’). The connectorshould be tightened by hand only!
Profile PC3
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 88/3652
698–894 MHz Panel AntennaX- polarization
800 10735
698–894–45
7-16
698– 894+45
7-16
IRTin out
8pinmale
8pinfemale
11.9 inches(303 mm)
2.625 inches ± 0.125(68 mm ± 4)
3.9 inches(99 mm)
Note: Refer to part number
860 10149 for the
specifications of theremote control actuator.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause
undesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
76.1 inches
(1934 mm)
78.1 inches
(1984 mm)
79.7 inches
(2024 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 89/365
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
11097-C936.4132/a
698–894 MHz Panel AntennaX- polarization
800 10736
65°
698–894 MHz
X - POL
Adjustable Electrical D0°–10°
Internal Remote Co
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
Order Information:
Model Description
800 10736 Antenna with 736 548 mounting brackets0°–10° electrical downtilt
800 10736 K Antenna with 738 546 mounting bracketsand 850 10007 mechanical tilt bracket0°–10° electrical downtilt
Reference the Mechanical Accessories section.
General specifications:
Frequency range 698–894 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)(bottom mounted)
Isolation >30 dB
Electrical downtilt 0.5–9.5 degrees (continuously adjustable)
Specifications: 698–806 MHz 824–894 MHz
Gain 16.4 dBi 17 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar)35 dB (average) 35 dB (average)
+45° and -45° polarization 67° (half-power) 68° (half-power)horizontal beamwidth
+45° and -45° polarization 9.5° (half-power) 8.6° (half-power)vertical beamwidth
Min. sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam 16 16 16 dB 18 18 17 dBaverage 19 18 17 dB 20 20 20 dB
Cross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical)
Sector ±60° >11 dB, Average: 15 dB >11 dB, Average: 15 dB
IRT specifications:
Logical interface ex factory1 AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out
Power supply 10–30 V
Power consumption <1 watt (standby)<8.5 watts (motor activated)
Adjustment time (full range) 40 sec.
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Mechanical specifications:
Weight 36.8 lb (16.7 kg)41.2 lb (18.7 kg) clamps included54.2 lb (24.6 kg) clamps and tilt kit included
Dimensions H x W x D 96 x 11.9 x 3.9 inches (2438 x 303 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 261 lbf / 88 lbf / 311 lbf
(1160 N) / (390 N) / (1380 N)Mounting category H (Heavy)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 102.4 x 12.4 x 4.5 inches (2600 x 315 x 115 mm)
Shipping weight 45.2 lb (20.5 kg)
Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) OD masts.
1) The protocol of the logical interface can beswitched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 is possible inan RET system supporting AISG 1.1 or supporting3GPP/AISG 2.0 after performing a layer 2 resetbefore address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter"3GPP" into the additional data filed "Installer’sID" and perform a layer 7 reset or a power reset.3GPP to AISG 1.1: Enter "AISG 1" into theadditional datafield "Installer’s ID" and perform alayer 2 reset or a power reset. After switching theprotocol any other information can be entered intothe "Installer’s ID" field.
2) The tightning torque for fixing the connector mustbe 0.5 – 1.0 Nm (‘hand-tightened’). The connectorshould be tightened by hand only!
Profile PC3
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 90/3654
698–894 MHz Panel AntennaX- polarization
800 10736
11.9 inches(303 mm)
96 inches(2438 mm)
2.625 inches ± 0.125
(68 mm ± 4)
3.9 inches
(99 mm)
Note: Refer to part number860 10149 for the
specifications of theremote control actuator.
98 inches
(2489 mm)
99.6 inches(2529 mm)
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
698–894–45
7-16
698–894+45
7-16
IRTin out
8pinmale
8pinfemale
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 91/365
698–894 MHz Panel AntennaX- polarization 800 10701
11221-FRO/e936.A2692/e
85°
698–894 MHz
X - POL
Adjustable Electrical D0°–16°
Internal Remote Co
General specifications:
Frequency range 698–894 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)(bottom mounted)
Isolation >30 dBElectrical downtilt 0–16 degrees (continuously adjustable)
Specifications: 698–806 MHz 824–894 MHz
Gain 13.5 dBi 14.15 dBi
Front-to-back ratio >26 dB (co-polar) >26 dB (co-polar)28 dB (average) 28 dB (average)
+45° and -45° polarization 85° (half-power) 84° (half-power)horizontal beamwidth
+45° and -45° polarization 16.5° (half-power) 15° (half-power)vertical beamwidth
Min. sidelobe suppression for 0° 8° 16° T 0° 8° 16° Tfirst sidelobe above main beam 15 15 16 dB 18 16 16 dBaverage 17 16 16 dB 20 16 17 dB
Cross polar ratioMain direction 0° 24 dB (typical) 26 dB (typical)Sector ±60° >8 dB, Average: 14 dB >8 dB, Average: 14 dB
IRT specifications:
Logical interface ex factory1 AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out
Power supply 10–30 V
Power consumption <1 watt (standby)<8.5 watts (motor activated)
Adjustment time (full range) 40 sec.
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
1 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand.
Please note: If the Primary of theRETsystem doesn’t support the standardof the ‘logical interface ex factory’, theRCU must be switched to the appropriatestandard of the Primary before installation.Please contact Kathrein for furtherinformation.
2 The tightning torque for fixing the connectormust be 0.5 – 1.0 Nm (‘hand-tightened’).The connector should be tightened byhand only!
Order Information:
Model Description
800 10701 Antenna with 738 546 mounting brackets0°–16° electrical downtilt
800 10701 K Antenna with 738 546 mounting bracketsand 850 10013 mechanical tilt bracket0°–16° electrical downtilt
Reference the Mechanical Accessories section.
Vertical pattern±45°- polarization
0°–16° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
698–894 MHz
Mechanical specifications:
Weight 22 lb (10 kg)26.5 lb (12 kg) clamps included34.6 lb (15.7 kg) clamps and tilt kit included
Dimensions H x W x D 53.3 x 11.9 x 3.9 inches (1355 x 303 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 129 lbf / 29 lbf / 153 lbf
(570 N / 125 N / 680 N)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 59.1 x 12.4 x 5 inches (1502 x 315 x 127 mm)
Shipping weight 26.5 lb (12 kg)
Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) OD masts.
Profile PC3
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 92/3656
698–894 MHz Panel AntennaX- polarization
800 10701
698–894–45
7-16
698– 894+45
7-16
IRTin out
8pinmale
8pinfemale
11.9 inches
(303 mm)
53.3 inches
(1355 mm)
2.625 inches ± 0.125
(68 mm ± 4)
3.9 inches
(99 mm)
Note: Refer to part number
860 10149 for thespecifications of the
remote control actuator.
55.4 inches
(1406 mm)
56.9 inches
(1446 mm)
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 93/365
800 10702698–894 MHz Panel AntennaX- polarization
11222-FRO/d936.A2691/e
85°
698–894 MHz
X - POL
Adjustable Electrical D0°–10°
Internal Remote Co
General specifications:
Frequency range 698–894 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)(bottom mounted)
Isolation >30 dBElectrical downtilt 0–10 degrees (continuously adjustable)
Specifications: 698–806 MHz 824–894 MHz
Gain 14.65 dBi 15.15 dBi
Front-to-back ratio >23 dB (co-polar) >27 dB (co-polar)25 dB (average) 29 dB (average)
+45° and -45° polarization 85° (half-power) 82° (half-power)horizontal beamwidth
+45° and -45° polarization 11.2° (half-power) 10.4° (half-power)vertical beamwidth
Min. sidelobe suppression for 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 17 18 dB 16 16 18 dBaverage 17 19 21 dB 17 19 20 dB
Cross polar ratioMain direction 0° 22 dB (typical) 22 dB (typical)Sector ±60° >10 dB, Average: 16 dB >10 dB, Average: 15 dB
IRT specifications:
Logical interface ex factory1 AISG 1.1
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out
Power supply 10–30 V
Power consumption <1 watt (standby)<8.5 watts (motor activated)
Adjustment time (full range) 40 sec.
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
Mechanical specifications:
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included43.9 lb (19.9 kg) clamps and tilt kit included
Dimensions H x W x D 76.1 x 10 x 3.9 inches (1934 x 255 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 149 lbf / 63 lbf / 212 lbf
(660 N / 280 N / 940 N)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 81.1 x 10.7 x 5 inches (2060 x 272 x 127 mm)
Shipping weight 30.9 lb (14 kg)
Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) ODmasts.
1 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand.
Please note: If the Primary of theRETsystem doesn’t support the standardof the ‘logical interface ex factory’, theRCU must be switched to the appropriatestandard of the Primary before installation.Please contact Kathrein for furtherinformation.
2 The tightning torque for fixing the connectormust be 0.5 – 1.0 Nm (‘hand-tightened’).The connector should be tightened byhand only!
Order Information:
Model Description
800 10702 Antenna with 738 546 mounting brackets0°–10° electrical downtilt
800 10702 K Antenna with 738 546 mounting bracketsand 850 10007 mechanical tilt bracket0°–10° electrical downtilt
Reference the Mechanical Accessories section.
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
698–894 MHz0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PC4
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 94/3658
698–894 MHz Panel AntennaX- polarization
800 10702
69
8–89
4–45
7-16
69
8–89
4+45
7-16
IRTin out
8pinmale
8pinfemale
10 inches(255 mm)
76.1 inches(1934 mm)
2.625 inches ± 0.125(68 mm ± 4)
3.9 inches
(99 mm)
Note: Refer to part number
860 10149 for the
specifications of theremote control actuator.
78.1 inches
(1984 mm)
79.7 inches
(2024 mm)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 95/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 96/3650
698–894 MHz Panel AntennaX- polarization
800 10703
698–894–45
7-16
698–894+45
7-16
IRTin out
8pinmale
8pinfemale
10 inches(255 mm)
96 inches(2438 mm)
2.625 inches ± 0.125(68 mm ± 4)
3.9 inches(99 mm)
Note: Refer to part number
860 10149 for thespecifications of the
remote control actuator.
97.2 inches(2468 mm)
98.7 inches
(2508 mm)
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10149
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 97/365
790–960 MHz Panel AntennaX- polarization
800 10456V0
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 2.5 dB
Squint ±2.0°
Weight 48.5 lb (22 kg)52.9 lb (24.kg) clamps included
Dimensions 88.7 x 22.7 x 3.9 inches(2254 x 576 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)(290 N) / (80 N) / (300 N)
Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 98.4 x 23.6 x 5.9 inches(2500 x 600 x 150 mm)
Shipping weight 61.7 lb (28 kg)
11352-B936.3907/b
Horizontal pattern±45° - polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain 20 dbi 20.2 dbi 20.5 dbi
Front-to-back ratio >28 dB (co-polar) >29 dB (co-polar) >30 dB (co-polar)
Horizontal beamwidth 33° (half-power) 32° (half-power) 30° (half-power)
Vertical beamwidth 9.1° (half-power) 8.8° (half-power) 8.5° (half-power)
Electrical downtilt 0.5°–10° 0.5°–10° 0.5°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° TFirst sidelobe above main beam >16 >13 >13 dB >18 >18 >17 dB >18 >16 >15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 23 dB (typical) 20 dB (typical)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
30°
790–960 MHz
X - POL
Adjustable Electrical D0°–10°
90 inches
(2286 mm)88.7 inches
(2254 mm)
3.9 inches
(99 mm)
22.7 inches
(576 mm)
91.6 inches
(2326 mm)
2.625 inches ± 0.125(68 mm ± 4)
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
790– 960–45
790–960+45
7-16 7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 98/3652
806–960 MHz Panel AntennaX- polarization800 10141
General specifications:
Frequency range 806-960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBWeight 48.5 lb (22 kg)
Dimensions 51 x 22 x 4.6 inches(1296 x 560 x 116 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 207 lbf / 43 lbf / 232 lbf
(920 N) / (190 N) / (1030 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 57.1 x 23.6 x 7.2 inches(1450 x 600 x 182 mm)
10778-E936.4119
Horizontal pattern±45° - polarization
Vertical pattern±45° - polarization Specifications: 806–894 MHz 880–960 MHz
Gain 18 dBi 18.5 dBi
Horizontal beamwidth 31° (half-power) 29° (half-power)
Vertical beamwidth 15° (half-power) 14° (half-power)
Front-to-back ratio, copolar >25 dB >29 dB
806-960-45° 806-960+45°
7-16 7-16
30°
806–960 MHz
X - POL
0° Electrical Downtilt
6.3 inches
(160 mm)
22 inches(560 mm)
55 inches(1396 mm)
51 inches
(1296 mm)
53.5 inches
(1358 mm)
2.625 inches ± 0.125
(68 mm ± 4)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 Degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 99/365
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Tracking 2 dB
Squint ±2°
Weight 45.2 lb (20.5 kg)49.6 lb (22.5 kg) clamps included
Dimensions 88.7 x 22.7 x 3.9 inches(2254 x 576 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 99.8 x 23.3 x 5.8 inches(2536 x 592 x 147 mm)
Shipping weight 55.1 lb (25 kg)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain 20.2 dbi 20.4 dbi 20.8 dbi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
Horizontal beamwidth 33° (half-power) 32° (half-power) 30° (half-power)
Vertical beamwidth 8.4° (half-power) 8.2° (half-power) 7.4° (half-power)
Sidelobe suppression for:First sidelobe above main beam >15 dB 15 dB >15 dB
Cross polar ratioMain direction 0° 30 dB (typical) 26 dB (typical) 23 dB (typical)
11310-A936.4149
790–960–45
790–960+45
7-16 7-16
NE W
30°
790–960 MHz
X-POL
0° Electrical Down
800 10643
90 inches(2286 mm)
88.7 inches(2254 mm)
3.9 inches(99 mm)
22.7 inches(576 mm)
91.6 inches(2326 mm)
2.625 inches ± 0.125(68 mm ± 4)
Vertical pattern±45°- polarization
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 100/3654 11368-A936.3885/a
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB (co-polar)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 400 watts per input (at 50°C)
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Weight 18.7 lb (8.5 kg)23.1 lb (10.5 kg) clamps included
Dimensions 50.9 x 10.2 x 3.9 inches(1294 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 99 lbf / 48 lbf / 138 lbf
(440 N) / (210 N) / (610 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62.4 x 11.5 x 5.4 inches(1586 x 292 x 138 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14°dBi 14.5 14.4 14.3 14.7 14.5 14.4 15 14.8 14.7
Front-to-back ratio >24 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
Horizontal beamwidth 67° (half-power) 66° (half-power) 65° (half-power)
Vertical beamwidth 15.7° (half-power) 15.5° (half-power) 15° (half-power)
Electrical downtilt 0°–14° 0°–14° 0°–14°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 7° 14° T 0° 7° 14° T 0° 7° 14° TFirst sidelobe above horizon 15 14 15 dB 18 15 15 dB 18 15 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
790–960 MHz Panel AntennaX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
52.1 inches(1324 mm)
50.9 inches(1294 mm)
3.9 inches(99 mm)
10.2 inches(259 mm)
53.7 inches(1364 mm)
2.625 inches ± 0.125(68 mm ± 4)
800 10303V02
65°
790–960 MHz
X - POL
justable Electrical Downtilt
0°–14°
Remote Control Option
Profile PC2
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–14° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 101/365
824–960 MHz Panel AntennaXX- polarization
General specifications:
Frequency range 824–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 4 x 7-16 DIN femaleElectrical downtilt 0–10 degrees (continuously adjustable)
Weight 50.7 lbs (23 kg)55.1 lb (25.kg) clamps included
Dimensions 79.7 x 14.7 x 6.7 inches(2024 x 374 x 169 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 205 lbf / 68 lbf / 259 lbf
(910 N) / (300 N) / (1150 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 89.6 x 15.4 x 8.76 inches(2276 x 392 x 222 mm)
11338-A936.4175
Specifications: 824–894 MHz 880–960 MHz
Gain at 0° tilt 15.5 dBi 15.7 dBi
+45° and -45° polarization 60° (half-power) 58° (half-power)horizontal beamwidth
+45° and -45° polarization 9.8° (half-power) 9.3° (half-power)vertical beamwidth
Sidelobe suppression for 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam >14 15 15 dB >14 15 15 dB
Cross polar ratioMain direction 0° 15 dB (typical) 16 dB (typical)Sector ±60° >10 dB >10 dB
Isolation >25 dB (typical) >28 dB (typical)
50.4 inches
(1280 mm)
29.1 inches(738 mm)
79.7 inches(2024 mm)
2.625 inches ± 0.125(68 mm ± 4)
14.5 inches
(368 mm)
24.3 inches
(618 mm)
6.7 inches
(169 mm)
14.7 inches
(374 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
65°
824–960 MHz824–960 MHz
XX - POL
Adjustable Electrical D0°–10°
Remote Control Op
800 10516V0
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
824–960–45°
7-16
824–960–45°
7-16
824–960+45°
7-16
824–960+45°
7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 102/3656 11341-A936.3816/c
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 400 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 0.5 dB
Squint ±1.5°
Weight 24.3 lb (11 kg)28.7 lb (13.kg) clamps included
Dimensions 76.1 x 10.2 x 3.9 inches(1934 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 153 lbf / 70 lbf / 203 lbf
(680 N) / (310 N) / (900 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 87.2 x 10.7 x 5.8 inches(2216 x 272 x 147 mm)
790–960 MHz Panel AntennaX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
77.3 inches(1964 mm)
76.1 inches(1934 mm)
3.9 inches(99 mm)
10.2 inches(259 mm)
78.9 inches(2004 mm)
2.625 inches ± 0.125
(68 mm ± 4)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHzAverage gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°
dBi 16.2 16.4 16.2 16.3 16.6 16.3 16.6 16.8 16.6
Front-to-back ratio >24 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)
Horizontal beamwidth 69° (half-power) 68° (half-power) 65° (half-power)
Vertical beamwidth 10° (half-power) 9.9° (half-power) 9.7° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 18 18 18 dB 18 18 18 dB 18 18 18 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
65°
790–960 MHz
X - POL
justable Electrical Downtilt0°–10°
Remote Control Option
800 10634V01
Profile PC2
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790– 960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 103/365
11339-A936.4176
General specifications:
Frequency range 2 x 824–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB
Impedance 50 ohms
Intermodulation (2x20w) IM3: -150 dBc
Polarization 2 x +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 4 x 7-16 DIN female
Electrical downtilt 0–8 degrees (continuously adjustable)
Weight 61.7 lbs (28 kg)66.1 lb (30 kg) clamps included
Dimensions 103.6 x 14.7 x 6.7 inches(2631 x 374 x 169 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 273 lbf / 90 lbf / 347 lbf
(1210 N) / (400 N) / (1540 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 114 x 15.4 x 8.7 inches(2896 x 392 x 222 mm)
824–960 MHz Panel AntennaXX Polarization
Specifications: 824–894 MHz 880–960 MHz
Gain 16.5 dBi 16.7 dBi+45° and -45° polarization 66° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 7.2° (half-power) 6.8° (half-power)vertical beamwidth
Sidelobe suppression for 0° 4° 8° T 0° 4° 8° Tfirst sidelobe above main beam >15 15 15 dB >15 16 15 dB
Cross polar ratioMain direction 0° 16 dB (typical) 17 dB (typical)Sector ±60° >8 dB >10 dB
Isolation, between ports >25 dB >28 dB
824–960+45
7-16
824–960–45
7-16
824–960+45
7-16
824–960–45
7-16
74.3 inches(1887 mm)
29.1 inches(738 mm)
103.6 inches(2631 mm)
2.625 inches ± 0.125
(68 mm ± 4)
36.3 inches(921 mm)14.5 inches
(368 mm)
Layout of interface
824–960
824–960
+45°–45°
RCU RCU
°54+°54–
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
65°
824–960 MHz824–960 MHz
XX - POL
Adjustable Electrical D0°–8°
Remote Control Op
800 10517V0
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
6.7 inches
(169 mm)
14.7 inches
(374 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 104/3658 11369-A936.3814/b
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB (co-polar)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Tracking, average 0.5 dB
Squint ±2.5°
Weight 25.4 lb (11.5 kg)30.4 lb (13.8 kg) clamps included
Dimensions 88.7 x 10.2 x 3.9 inches(2254 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 180 lbf / 88 lbf / 246 lbf
(800 N) / (390 N) / (1090 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 99.8 x 10.7 x 5.8 inches(2536 x 272 x 147 mm)
790–960 MHz Panel AntennaX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
89.9 inches(2284 mm)
88.7 inches(2254 mm)
3.9 inches(99 mm)
10.2 inches
(259 mm)
91.5 inches
(2324 mm)
2.625 inches ± 0.125(68 mm ± 4)
65°
790–960 MHz
X - POL
justable Electrical Downtilt0°–8°
Remote Control Option
800 10305V02
Profile PC2
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0° 4° 8° 0° 4° 8° 0° 4° 8°dBi 16.8 17 16.7 16.9 17.1 16.9 17.2 17.4 17
Horizontal beamwidth 69° (half-power) 67° (half-power) 65° (half-power)
Vertical beamwidth 9.1° (half-power) 8.8° (half-power) 8.5° (half-power)
Electrical downtilt 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 2° 4° 8° T 0° 2° 4° 8° T 0° 2° 4° 8° TFirst sidelobe above main beam 18 18 18 16 dB 18 18 18 16 dB 20 18 17 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
790–960
–45
790–960
+45
7-16 7-16
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 105/365
General specifications:
Frequency range 790–960 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female (long neck)
Isolation >30 dBTracking 1 dB
Squint ±2°
Null-fill at 0° tilt -25 dB (typical)
Weight 30.9 lb (14 kg)35.3 lb (16 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 99 lbf / 286 lbf
(940 N) / (440 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 113.2 x 10.7 x 5 inches(2876 x 272 x 127 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T(average) 17 17.1 17 dBi 17.1 17.2 17.1 dBi 17.3 17.4 17.3 dBi
Front-to-back ratio >24 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)
+45° and -45° polarization 68° (half-power) 66° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.7° (half-power) 7.5° (half-power) 7.3° (half-power)vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable
Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam >17 14 14 dB >18 15 15 dB >20 18 18 dB
Cross polar ratio (typical)Main direction 0° 23 dB 23 dB 25 dB
Sector ±60° >10 dB >10 dB >10 dB
11301-B936.3794/a
790–960 MHz Panel AntennaX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10306V02
65°
790–960 MHz
X - POL
Adjustable Electrical D
0.5°–9.5°
Remote Control Op
Profile PC2
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches(259 mm)
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 106/3650 11342-A936.3989/a
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Front-to-back ratio >27 dB (co-polar)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 400 watts per input (at 50°C)
Connector 4 x 7-16 DIN femaleIsolation >30 dB
Tracking, avg. 1 dB
Squint ±2.5°
Weight 52.9 lb (24 kg)57.3 lb (26 kg) clamps included
Dimensions 88.7 x 22.7 x 3.9 inches(2254 x 576 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 396 lbf / 75 lbf / 459 lbf
(1760 N) / (330 N) / (2040 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 98.4 x 23.6 x 5.9 inches(2500 x 600 x 150 mm)
790–960 MHz Panel AntennaXX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
90 inches(2286 mm)
88.7 inches(2254 mm)
3.9 inches(99 mm)
22.7 inches
(576 mm)
91.6 inches(2326 mm)
2.625 inches ± 0.125(68 mm ± 4)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0° 4° 8° 0° 4° 8° 0° 4° 8°dBi 16.9 17.1 17 17 17.2 17.1 17.3 17.4 17.1
Horizontal beamwidth 66° (half-power) 65° (half-power) 64° (half-power)
Vertical beamwidth 9.1° (half-power) 9° (half-power) 8.5° (half-power)
Electrical downtilt 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression for first 0° 3° 6° 8° T 0° 3° 6° 8° T 0° 3° 6° 8° Tsidelobe above main beam, avg. 18 18 16 15 dB 18 18 16 15 dB 18 18 16 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
65°
790–960 MHz790–960 MHz
XX - POL
justable Electrical Downtilt0°–8°
Remote Control Option
800 10647V01
790–960
–45
7-16
790– 960
+45
7-16
790–960
–45
7-16
790–960
+45
7-16
Layout of interface
RCU790–960
RCU790–960
–45° +45° –45° +45°
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 107/365
General specifications:
Frequency range 790–960 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 1 dB
Squint ±2°
Weight 28.7 lb (13 kg)33.1 lb (15 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 112.4 x 10.7 x 5.8 inches(2855 x 272 x 147 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T(average) 17.4 17.5 17.4 dBi 17.5 17.6 17.5 dBi 17.7 17.9 17.7 dBi
Front-to-back ratio >24 dB >25 dB >25 dB(180°±30°)
+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.7° (half-power) 7.5° (half-power) 7.3° (half-power)vertical beamwidth
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable
Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam >18 15 15 dB >18 15 15 dB >18 16 15 dB
Cross polar ratioMain direction 0° 22 dB (typical) 23 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11302-B936.3981/a
790–960 MHz Panel AntennaX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
800 10307V
65°
790–960 MHz
X - POL
Adjustable Electrical D
0.5°–9.5°
Remote Control Op
Profile PC2
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches(259 mm)
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5–9.5° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 108/3652
790–960 MHz Panel AntennaX Polarization
11330-B936.3998/a
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 0.5 dB
Squint ±1.5°
Weight 19.8 lb (9 kg)23.8 lb (11 kg) clamps included
Dimensions 50.9 x 10.2 x 3.9 inches(1294 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 97 lbf / 45 lbf / 133 lbf
(430 N) / (200 N) / (590 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62.4 x 11.5 x 5.4 inches(1586 x 292 x 138 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHzAverage gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14°
dBi 13.2 13.3 13.2 13.3 13.4 13.3 13.4 13.5 13.4
Front-to-back ratio (180°±0°) >24 dB >24 dB >26 dB(180°±30°) >20 dB >22 dB >24 dB
Horizontal beamwidth 86° (half-power) 85° (half-power) 83° (half-power)
Vertical beamwidth 16° (half-power) 15.5° (half-power) 15° (half-power)
Electrical downtilt 0°–14° 0°–14° 0°–14°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 7° 14° T 0° 7° 14° T 0° 7° 14° TFirst sidelobe above main beam >17 16 15 dB >17 17 16 dB >17 16 16 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
10.2 inches
(259 mm)
53.7 inches(1364 mm)
50.9 inches(1294 mm)
52.1 inches
(1324 mm)
3.9 inches
(99 mm)
2.625 inches ± 0.125(68 mm ± 4)
85°
790–960 MHz
X - POL
justable Electrical Downtilt0°–14 °
Remote Control Option
800 10308V01
Profile PC2
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
790–960–45
790–960+45
7-16 7-16
Vertical pattern±45°- polarization
0°–14° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 109/365
790–960 MHz Panel AntennaX Polarization
11260-A936.3918/b
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 400 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking 0.5 dB
Squint ±3.0°
Weight 25.4 lb (11.5 kg)29.8 lb (13.5 kg) clamps included
Dimensions 76.1 x 10.2 x 3.9 inches(1934 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 153 lbf / 70 lbf / 203 lbf
(680 N) / (310 N) / (900 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 87.2 x 11.5 x 5.8 inches(2216 x 292 x 147 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°dBi 14.8 15 14.6 14.9 15.1 14.7 14.8 15.2 15
Front-to-back ratio (180°±0°) >24 dB >25 dB >26 dB(180°±30°) >21 dB >21 dB >21 dB
Horizontal beamwidth 85° (half-power) 85° (half-power) 83° (half-power)
Vertical beamwidth 10.1° (half-power) 9.8° (half-power) 9.6° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° TFirst sidelobe above main beam >15 15 14 dB >15 15 15 dB >18 18 18 dBAverage >19 19 19 dB >20 20 20 dB >22 22 22 dB
Cross polar ratioMain direction 0° 23 dB (typical) 22 dB (typical) 22 dB (typical)Sector ±60° >10 dB>10 dB >10 dB
10.2 inches(259 mm)
78.9 inches(2004 mm)
76.1 inches(1934 mm)
77.3 inches(1964 mm)
3.9 inches(99 mm)
2.625 inches ± 0.125(68 mm ± 4)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
790–960–45
790–960+45
7-16 7-16
85°
790–960 MHz
X - POL
Adjustable Electrical D0°–10 °
Remote Control Op
800 10309V0
Profile PC2
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 110/3654
790–960 MHz Panel AntennaX Polarization
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 0.5 dB
Squint ±3.5°
Weight 30.9 lb (14 kg)35.3 lb (16 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 214 lbf / 95 lbf / 286 lbf
(950 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 113.2 x 10.7 x 5 inches(2876 x 272 x 127 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°dBi 15.8 15.6 15.4 16 15.9 15.8 16.2 16.2 16.2
Front-to-back ratio (180°±0°) >24 dB >24 dB >26 dB(180°±30°) >20 dB >22 dB >24 dB
Horizontal beamwidth 86° (half-power) 85° (half-power) 83° (half-power)
Vertical beamwidth 8.1° (half-power) 7.9° (half-power) 7.6° (half-power)
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° TFirst sidelobe above main beam >18 14 14 dB >18 17 16 dB >17 16 15 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
10.2 inches(259 mm)
105.3 inches
(2674 mm)
101.3 inches(2574 mm)
102.5 inches(2604 mm)
3.9 inches(99 mm)
2.625 inches ± 0.125(68 mm ± 4)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
85°
790–960 MHz
X - POL
justable Electrical Downtilt0.5°–9.5°
Remote Control Option
800 10310V01
Profile PC2
790–960–45
790–960+45
7-16 7-16
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
11311-A936.3996/a
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 111/365
790–960 MHz Panel AntennaX Polarization
11329-A936.3995/a
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 0.5 dB
Squint ±3.5°
Weight 30.9 lb (14 kg)35.3 lb (16 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 112.4 x 10.7 x 5.8 inches(2855 x 272 x 147 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Average gain tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°dBi 16.2 16.2 15.8 16.3 16.3 16.1 16.5 16.6 16.5
Front-to-back ratio (180°±0°) >24 dB >25 dB >26 dB(180°±30°) >21 dB >23 dB >24 dB
Horizontal beamwidth 85° (half-power) 85° (half-power) 83° (half-power)
Vertical beamwidth 8° (half-power) 7.8° (half-power) 7.6° (half-power)
Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam >18 15 14 dB >18 17 16 dB >18 16 15 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
790–960–45
790– 960+45
7-16 7-16
85°
790–960 MHz
X - POL
Adjustable Electrical D0.5°–9.5°
Remote Control Op
800 10300V0
Profile PC2
10.2 inches
(259 mm)
105.3 inches(2674 mm)
101.3 inches(2574 mm)
102.5 inches(2604 mm)
3.9 inches
(99 mm)
2.625 inches ± 0.125(68 mm ± 4)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0.5°–9.5° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 112/3656
General specifications:
Frequency range 2 x 824–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization 2 x +45° and 2 x -45°
Maximum input power 500 watts per input (at 50°C)
Connector 4 x 7-16 DIN female
Electrical downtilt 0–8 degrees (continuously adjustable)
Tracking, average 0.5 dB
Squint ±4.5°
Weight 61.7 lbs (28 kg)66.1 lbs (30 kg) clamps included
Dimensions 103.6 x 14.7 x 6.7 inches(2631 x 374 x 169 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 273 lbf / 90 lbf / 347 lbf
(1210 N) / (400 N) / (1540 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 114 x 15.4 x 8.76 inches(2896 x 392 x 222 mm)
824–960 MHz Panel AntennaXX Polarization
Specifications: 824–894 MHz 880–960 MHz
Gain at 0° tilt 4 x 16.5 dBi 4 x 17 dBi
+45° and -45° polarization 88° (half-power) 85° (half-power)horizontal beamwidth
+45° and -45° polarization 7.2° (half-power) 6.8° (half-power)vertical beamwidth
Sidelobe suppression for 0° 4° 8° T 0° 4° 8° Tfirst sidelobe above main beam >15 15 15 dB >16 16 15 dB
Cross polar ratioMain direction 0° 15 dB (typical) 15 dB (typical)Sector ±60° >10 dB >10 dB
Isolation >25 dB (typical) >28 dB (typical)
824–960+45
7-16
824–960–45
7-16
824–960+45
7-16
824–960–45
7-16
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
Layout of interface
824–960
824–960
+45°–45°
RCU RCU
°54+°54–
11340-A936.4177
74.3 inches
(1887 mm)
29.1 inches
(738 mm)
103.6 inches(2631 mm)
2.625 inches ± 0.125
(68 mm ± 4)
36.3 inches
(921 mm)14.5 inches(368 mm)
88°
824–960 MHz824–960 MHz
XX - POL
justable Electrical Downtilt0°–8°
Remote Control Option
800 10518V01
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
6.7 inches(169 mm)
14.7 inches(374 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 113/365
806–960 MHz Panel AntennaX- polarization
Specifications:
Frequency range 806–960 MHz
Gain 2 x 8.5 dBi (806–880 MHz)2 x 9 dBi (880–960 MHz)
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150dBc
Polarization +45° and -45°
Front-to-back ratio >27 dB (co-polar)
Maximum input power 350 watts (at 50°C) per input
±45° polarization 70 degrees (half-power) (806–880 MHz)horizontal beamwidth 65 degrees (half-power) (880–960 MHz)
±45° polarization 70 degrees (half-power) (806–880 MHz)vertical beamwidth 68 degrees (half-power) (880–960 MHz)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Weight 6.6 lb (3 kg)
Dimensions 10.1 x 10.3 x 4.6 inches(256 x 262 x 116 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 9 lbf / 6 lbf / 21 lbf
(40 N) / (25 N) / (90 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 14.8 x 11.3 x 6.5 inches(377 x 287 x 165 mm)
Shipping weight 9.9 lb (4.5 kg)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
10534-E936.1408/g
65°
806–960 MHz
X - POL
0° Electrical Down
739 619
Profile PA1
10.1 inches(256 mm)
13.8 inches(350 mm)
10.3 inches(262 mm)
2.625 inches ± 0.125(68 mm ± 4)
4.6 inches(116 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 114/3658
806–960 MHz Panel AntennaX- polarization
Specifications:
Frequency range 806–960 MHz
Gain 2 x 12 dBi (806–880 MHz)2 x 12.5 dBi (880–960 MHz)
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3:< -150dBc
Front-to-back ratio >30 dB (co-polar)
Maximum input power 500 watts (at 50°C) per input
Polarization +45° and -45°
±45° polarization 68 degrees (half-power) (806–880 MHz)horizontal beamwidth 65 degrees (half-power) (880–960 MHz)
±45° polarization 29 degrees (half-power) (806–880 MHz)vertical beamwidth 27 degrees (half-power) (880–960 MHz)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Weight 13.2 lb (6 kg)
Dimensions 25.8 x 10.3 x 4.6 inches(656 x 262 x 116 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 25 lbf / 14 lbf / 54 lbf
(110 N) / (60 N) / (240 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 30.8 x 11.3 x 6.5 inches(782 x 287 x 165 mm)
Shipping weight 16.5 lb (7.5 kg)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–30 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
806–960 MHz
X - POL
0° Electrical Downtilt
739 620
Profile PA1
29.5 inches
(750 mm)
25.8 inches(656 mm)
10.3 inches(262 mm)
2.625 inches ± 0.125(68 mm ± 4)
28 inches(710 mm)
4.6 inches(116 mm)
10532-E936.1557/d
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 115/365
Specifications: 790–862 MHz 824–894 MHz 880–960 MHzGain 14.5 dBi 14.7 dBi 15 dBi
VSWR 1.4:1 1.3:1 1.3:1
+45° and -45° polarization 66° (half-power) 65° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 16° (half-power) 15.7° (half-power) 14.6° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above horizon >13 dB >14 dB >16 dBsector 0°–30° above horizon >13 dB >14 dB >14 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
790–960 MHz Panel AntennaX- polarization
65°
790–960 MHz
X - POL
6° Electrical Down
800 10207V0
Profile PC2
General specifications:
Frequency range 790–960 MHz
Front-to-back ratio >30 dB (co-polar)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Electrical downtilt 6 degreesIsolation >30 dB
Weight 16.5 lb (7.5 kg)20.9 lb (9.5 kg) clamps included
Dimensions 50.9 x 10.2 x 3.9 inches(1294 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 84 lbf / 246 lbf
(790 N) / (370 N) / (1090 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 60.1 x 10.7 x 5 inches(1526 x 272 x 127 mm)
Shipping weight 29.1 lb (13.2 kg)
11294-B936.3779/a
52.1 inches(1324 mm)
50.9 inches(1294 mm)
3.9 inches(99 mm)
10.2 inches(259 mm)
2.625 inches ± 0.125
(68 mm ± 4)
53.7 inches(1364 mm)
Vertical pattern±45°- polarization
6° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 116/36500
790–960 MHz Panel AntennaX- polarization
11364-A936.3908/a
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 14.5 dBi 14.7 dBi 15 dBi
Front-to-back ratio (180°±30°) >23 dB >24 dB >25 dB
+45° and -45° polarization 69° (half-power) 68° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 14.7° (half-power) 14.3° (half-power) 13.2° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above horizon >14 dB >15 dB >14 dB
Cross polar ratioMain direction 0° >20 dB >20 dB >20 dBSector ±60° >11 dB >11 dB >11 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
790–960 MHz
X - POL
0° Electrical Downtilt
800 10202V02
Profile PC2
General specifications:
Frequency range 790–960 MHz
Impedance 50 ohms
VSWR <1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking 0.5 dB
Squint ±2°
Weight 14.3 lb (6.5 kg)18.3 lb (8.3 kg) clamps included
Dimensions 50.9 x 10.2 x 3.9 inches(1294 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 97 lbf / 45 lbf / 135 lbf
(430 N) / (200 N) / (600 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.5 x 11.5 x 5.4 inches(1436 x 292 x 138 mm)
Shipping weight 19.8 lb (9 kg)
52.1 inches(1324 mm)
50.9 inches(1294 mm)
3.9 inches(99 mm)
10.2 inches
(259 mm)
2.625 inches ± 0.125
(68 mm ± 4)
53.7 inches(1364 mm)
Vertical pattern±45°- polarization
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 117/365
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
Front-to-back ratio >25 dB (180°±30°)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking, average 1 dB
Squint ±1.5°
Weight 20.9 lb (9.5 kg)24.9 lb (11.3 kg) clamps included
Dimensions 76.1 x 10.2 x 3.9 inches(1934 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 156 lbf / 70 lbf / 205 lbf
(690 N) / (310 N) / (910 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 81.3 x 10.7 x 5.8 inches(2066 x 272 x 147 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHzGain 16.2 dBi 16.5 dBi 16.9 dBi
VSWR <1.5:1 <1.4:1 <1.3:1
+45° and -45° polarization 69° (half-power) 68° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 9.4° (half-power) 9.3° (half-power) 8.8° (half-power)vertical beamwidth
Electrical downtilt 6° 6° 6°
Sidelobe suppression forfirst sidelobe above horizon >14 dB >15 dB >15 dB
Cross polar ratioMain direction 0° >20 dB >20 dB >20 dBSector ±60° >10 dB >10 dB >10 dB
11367-A936.3909/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
790–960 MHz
X - POL
6° Electrical Down
800 10294V0
Profile PC2
77.3 inches(1964 mm)
76.1 inches(1934 mm)
3.9 inches(99 mm)
78.9 inches(2004 mm)
2.625 inches ± 0.125
(68 mm ± 4)
10.2 inches(259 mm)
Vertical pattern±45°- polarization
6° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 118/36502
77.3 inches(1964 mm)
76.1 inches(1934 mm)
3.9 inches(100 mm)
78.9 inches(2004 mm)
2.625 inches ± 0.125
(68 mm ± 4)
10.2 inches(259 mm)
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
Front-to-back ratio >25 dB (180°±30°)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking 0.5 dB
Squint ±2°
Weight 20.9 lb (9.5 kg)24.9 lb (11.3 kg) clamps included
Dimensions 76.1 x 10.2 x 3.9 inches(1934 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 156 lbf / 70 lbf / 205 lbf
(690 N) / (310 N) / (910 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 81.3 x 11.5 x 7.6 inches(2066 x 292 x 192 mm)
Shipping weight 29.3 lb (13.3 kg)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 16.4 dBi 16.6 dBi 16.9 dBi
VSWR <1.5:1 <1.5:1 <1.4:1
+45° and -45° polarization 69° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 9.9° (half-power) 9.5° (half-power) 8.9° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above horizon >13 dB >15 dB >15 dB
Cross polar ratioMain direction 0° >22 dB >22 dB >22 dBSector ±30° >18 dB >18 dB >18 dBSector ±60° >14 dB >14 dB >14 dB
11365-A936.3804/c
65°
790–960 MHz
X - POL
0° Electrical Downtilt
800 10203V02
Profile PC2
Vertical pattern±45°- polarization
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790–960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 119/365
790–960 MHz Panel AntennaX- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 790–960 MHz
Front-to-back ratio >25 dB (180°±30°)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBTracking 0.5 dB
Squint ±2°
Weight 24.3 lb (11 kg)28.2 lb (12.8 kg) clamps included
Tracking 0.5 dB
Squint ±2°
Dimensions 88.7 x 10.2 x 3.9 inches(2254 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 84 lbf / 246 lbf
(790 N) / (370 N) / (1090 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 93.9 x 10.7 x 5.8 inches
(2386 x 272 x 147 mm)
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 17.2 dBi 17.5 dBi 17.8 dBi
VSWR <1.5:1 <1.4:1 <1.4:1
+45° and -45° polarization 69° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 8.5° (half-power) 8.3° (half-power) 7.8° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above horizon >13 dB >14 dB >15 dB
Cross polar ratioMain direction 0° >25 dB >25 dB >25 dBSector ±60° >14 dB >14 dB >14 dB
65°
790–960 MHz
X - POL
0° Electrical Down
800 10204V0
Profile PC2
11366-A936.3812/b
89.9 inches(2284 mm)
88.7 inches(2254 mm)
3.9 inches(99 mm)
10.2 inches(259 mm)
91.5 inches
(2324 mm)
2.625 inches ± 0.125(68 mm ± 4)
Vertical pattern±45°- polarization
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
790– 960–45
790–960+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 120/36504
790–960 MHz Panel AntennaX Polarization
11297-A936.3980/a
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Front-to-back ratio >25 dB (180° ±30°)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Null fill -25 dB typical
Tracking, average 0.5 dB
Squint ±2°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 106.5 x 10.7 x 5.8 inches
(2706 x 272 x 147 mm)
Specifications: 790–866 MHz 824–894 MHz 880–960 MHz
Gain 17.7 dBi 17.9 dBi 18 dBi
+45° and -45° polarization 69° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.4° (half-power) 7.2° (half-power) 6.8° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above main beam >14 dB >15 dB >15 dB
Cross polar ratioMain direction 0° >25 dB >25 dB >25 dBSector ±60° >12 dB >12 dB >12 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches(259 mm)
105.3 inches(2674 mm)
101.3 inches(2574 mm)
102.5 inches(2604 mm)
3.9 inches(99 mm)
65°
790–960 MHz
X - POL
0° Electrical Downtilt
800 10215V01
Profile PC2
Vertical pattern±45°- polarization
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
790–960–45
790–960+45
7-16 7-16
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 121/365
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
VSWR <1.4:1
Front-to-back ratio >25 dB(180°±30)
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Electrical downtilt 6 degrees
Null fill -25 dB (typical)
Tracking 0.5 dB
Squint ±2.5°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 106.5 x 10.7 x 5.8 inches(2706 x 272 x 147 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–866 MHz 824–894 MHz 880–960 MHz
Gain 17.7 dBi 17.9 dBi 18 dBi
+45° and -45° polarization 69° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.4° (half-power) 7.2° (half-power) 6.8° (half-power)vertical beamwidth
Sidelobe suppression forfirst sidelobe above main beam >16 dB >17 dB >17 dB
Cross polar ratioMain direction 0° >25 dB >25 dB >25 dBSector ±60° >10 dB >10 dB >10 dB
11295-A936.3978/a
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches
(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches
(259 mm)
65°
790–960 MHz
X-POL
6° Electrical Down
800 10208V0
Profile PC2
790–960–45
790–960+45
7-16 7-16
Vertical pattern±45°- polarization
6° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 122/36506
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
Impedance 50 ohms
VSWR <1.4:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Electrical downtilt 9 degrees
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Null-fill -25 dB (typical)
Tracking, average 1 dB
Squint ±2.5°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 106.5 x 10.7 x 5.8 inches
(2705 x 272 x 147 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 17.6 dBi 17.8 dBi 18 dBi
Front-to-back ratio >25 dB >25 dB >25 dB(180°±30°)
+45° and -45° polarization 69° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.4° (half-power) 7.2° (half-power) 6.8° (half-power)vertical beamwidth
Sidelobe suppression for >13 dB >15 dB >16 dBfirst sidelobe above main beam
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11296-A936.3979/a
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches
(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches(259 mm)
65°
790–960 MHz
X-POL
9° Electrical Downtilt
800 10214V01
Profile PC2
790–960–45
790–960+45
7-16 7-16
Vertical pattern±45°- polarization
9° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 123/365
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Tracking, average 1 dB
Squint ±4.5°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 106.5 x 10.7 x 5.8 inches(2706 x 272 x 147 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 16.6 dBi 16.7 dBi 16.8 dBi
+45° and -45° polarization 86° (half-power) 85° (half-power) 83° (half-power)horizontal beamwidth
+45° and -45° polarization 7.5° (half-power) 7.3° (half-power) 7° (half-power)vertical beamwidth
Front-to-back ratio (180° ±0°) >25 dB >25 dB >25 dB(180° ±30°) >23 dB >24 dB >24 dB
Sidelobe suppression forfirst sidelobe above main beam 16 dB 17 dB 16 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >15 dB >15 dB >13 dB
11322-A936.3999/a
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches
(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches
(259 mm)
790–960–45
790–960+45
7-16 7-16
85°
790–960 MHz
X-POL
0° Electrical Down
800 10217V0
Profile PC2
Vertical pattern±45°- polarization
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 124/36508
790–960 MHz Panel AntennaX- polarization
General specifications:
Frequency range 790–960 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 500 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBElectrical downtilt 6 degrees
Tracking, average 0.5 dB
Squint ±2.5°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 101.3 x 10.2 x 3.9 inches(2574 x 259 x 99 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 212 lbf / 95 lbf / 286 lbf
(940 N) / (420 N) / (1270 N)Mounting category H (Heavy)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 106.5 x 10.7 x 5.8 inches(2706 x 272 x 147 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10007 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 790–862 MHz 824–894 MHz 880–960 MHz
Gain 16.3 dBi 16.5 dBi 16.9 dBi
+45° and -45° polarization 86° (half-power) 85° (half-power) 83° (half-power)horizontal beamwidth
+45° and -45° polarization 7.6° (half-power) 7.3° (half-power) 7° (half-power)vertical beamwidth
Front-to-back ratio (180° ±0°) >24 dB >25 dB >27 dB(180° ±30°) >22 dB >23 dB >25 dB
Sidelobe suppression forfirst sidelobe above main beam 17 dB 16 dB 16 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >14 dB >14 dB >12 dB
11323-A936.4000/a
102.5 inches(2604 mm)
101.3 inches(2574 mm)
3.9 inches(99 mm)
104.1 inches
(2644 mm)
2.625 inches ± 0.125(68 mm ± 4)
10.2 inches(259 mm)
790–960–45
790–960+45
7-16 7-16
85°
790–960 MHz
X-POL
6° Electrical Downtilt
800 10218V01
Profile PC2
Vertical pattern±45°- polarization
9° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 125/365
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
35° 1710–2170 MHz 19.5 dBi 800 10251V01 0°– 12° ADT* +45° and -45° 40.6 inches 111
1710–2170 MHz 20.5 dBi 742 351V01 0°– 8° ADT* +45° and -45° 51.3 inches 112
45° 1710–2170 MHz 19.5 dBi 742 218V01 0°– 8° ADT* +45° and -45° 51.4 inches 113
1710–2180 MHz 21 dBi 742 219V01 0°– 6° ADT* +45° and -45° 76.6 inches 114
62° 1710–2200 MHz 18.7 dBi 800 10636 0°– 8° ADT* +45° and -45° 55.4 inches 117
65° 1710–2170 MHz 12 dBi 739 489V01 2° +45° and -45° 13.5 inches 146
1710–2200 MHz 15.4 dBi 800 10247V01 0°– 12° ADT* +45° and -45° 28.9 inches 122
1710–2170 MHz 15.6 dBi 742 196V01 0° +45° and -45° 28.9 inches 147 1710–2200 MHz 17.6 dBi 800 10504V01 0°– 15° ADT* +45° and -45° 54.6 inches 130
1710–2200 MHz 17.7 dBi 800 10614V01 2°– 10° ADT* +45° and -45° 51.7 inches 123
1710–2170 MHz 17.7 dBi 742 214V01 0°– 8° ADT* +45° and -45° 45 inches 126
1710–2200 MHz 17.9 dBi 742 215V01 0°– 10° ADT* +45° and -45° 51.7 inches 127
1710–2200 MHz 17.9 dBi 800 10314 0°– 10° ADT* +45° and -45° 51.3 inches 128
1710–2200 MHz 17.9 dBi 800 10618 0°– 10° ADT* +45° and -45° 51.3 inches 128
1710–2200 MHz 17.9 dBi 800 10428V01 6° +45° and -45° 51.3 inches 150
1710–2200 MHz 18.1 dBi 800 10425V01 0° +45° and -45° 51.3 inches 148
1710–2200 MHz 18.1 dBi 800 10426V01 2° +45° and -45° 51.3 inches 149
1710–2200 MHz 18.7 dBi 800 10505V01 0°– 10° ADT* +45° and -45° 78.1 inches 131
1710–2200 MHz 19.2 dBi 742 213V01 0°– 6° ADT* +45° and -45° 76.9 inches 132
1710–2170 MHz 20.2 dBi 742 186V01 0° +45° and -45° 85 inches 151
1710–2200 MHz 20.8 dBi 800 10439V01 0° +45° and -45° 85.5 inches 152
1710–2200 MHz 21.1 dBi 800 10378 0°– 6° ADT* +45° and -45° 100.3 inches 134
68° 1710–2170 MHz 8.6 dBi 742 210V01 0° +45° and -45° 6.1 inches 145
88° 1710–2170 MHz 11.5 dBi 741 984V01 0° +45° and -45° 13.5 inches 153
1710–2170 MHz 14 dBi 741 988V01 0°– 10° ADT* +45° and -45° 26.1 inches 137
1710–2200 MHz 16.8 dBi 741 989V01 0°– 8° ADT* +45° and -45° 51.3 inches 138
1710–2170 MHz 18 dBi 741 990V01 0°– 6° ADT* +45° and -45° 76.5 inches 139
1710 – 2200 MHz • XX Polarization • Adjustable Electrical Downtilt
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
45° 1710–2200 MHz 19.3 dBi 800 10606V01 0°– 10° ADT* 2 x +45° and -45° 51.7 inches 115
65° 1710–2170 MHz 15.2 dBi 742 233V01 0°– 10° ADT* 2 x +45° and -45° 26.8 inches 140
1710–2200 MHz 17.6 dBi 800 10510V01 0°– 15° ADT* 2 x +45° and -45° 54.7 inches 135
1710–2170 MHz 17.7 dBi 742 237 0°– 8° ADT* 2 x +45° and -45° 45.2 inches 141
1710–2200 MHz 17.8 dBi 742 236V01 0°– 10° ADT* 2 x +45° and -45° 51.9 inches 142
1710–2200 MHz 18.7 dBi 800 10511V01 0°– 10° ADT* 2 x +45° and -45° 78.7 inches 136
1710–2170 MHz 19.2 dBi 742 235V01 0°–6° ADT* 2 x +45° and -45° 77.1 inches 143
88° 1710–2180 MHz 16.2 dBi 742 352V01 0°–10° ADT* 2 x +45° and -45° 51.9 inches 144
*ADT - Adjustable Electrical Downtilt
1710 to 2690 MHz Antennas
109
1710 – 2200 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt
1710 – 2690 MHz • XX Polarization1710 – 2170 / 2490-2690 MHz • XX Polarization1710 – 2180 MHz • V Polarization2490 – 2690 MHz • X and XX PolarizationTrisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
See the following page for summary list.
1710 – 2690 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 1710–2690 MHz 15.5 dBi 800 10681 0°– 12° ADT* +45° and -45° 28.5 inches 118
1710–2690 MHz 18.2 dBi 800 10621V01 0°– 12° ADT* +45° and -45° 55.1 inches 124
1710–2690 MHz 18.5 dBi 800 10651 0°–6° ADT* +45° and -45° 65.7 inches 133
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 126/365
A N T E N N A S
Kathrein’s range of advanced antenna products for PCS and the AWS bands is unmatched, for
broadness of product line.
Most antennas within this category feature cross polarized (X-Pol) radiating systems and are ideal for
monopole diversity applications. Most include fully adjustable down-tilt (ADT), allowing site optimization
without replacing antennas, and may be equipped for optional remote downtilt control.
Within this group of antennas are several that are multiband; two independent X-pol antenna systems
provide for isolated operation within the 1710-2200 MHz band. Such antennas may be utilized for
segmented operation by protocol or spectrum usage – TDMA vs. GSM or PCS vs. AWS, or to resolvecapacity issues.
1710-2690 MHz Antennas
1710 to 2690 MHz Antennas
110
1710 – 2170 / 2490-2690 MHz • XX Polarization • Adjustable Electrical Downtilt
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 1710–2170 MHz 17.5 dBi 800 10644 0°– 10° ADT* 2 x +45° and -45° 55.5 inches 120
2490–2690 MHz 18 dBi 0°– 10° ADT*
1710 – 2690 MHz • XX Polarization • Adjustable / Fixed Electrical Downtilt
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
65° 1710–2690 MHz 15.5 dBi 800 10682 0°– 12° ADT* +45° and -45° 28.5 inches 119
1710–2690 MHz 17.8 dBi 800 10622 0°– 12° ADT* 2 x +45° and -45° 55.7 inches 125
1710 – 2180 MHz • V Polarization
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
13° 1710–2180 MHz 18.4 dBi 800 10368 0° V 11.8 inches 154
*ADT - Adjustable Electrical Downtilt
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
48° 2496–2690 MHz 18 dBi 840 10046 0°– 10° ADT* +45° and -45° 42 inches 155
2496 – 2690 MHz • X Polarization
Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page
87° 2496–2690 MHz 16 dBi 840 10054B 0°– 10° ADT* 2 x +45° and -45° 42 inches 156
2496 – 2690 MHz • XX Polarization
Horizontal ElectricalBeamwidth Gain Model Downtilt Polarization Height Page
65° 15.5 dBi 800 10375 0°–12° +45° and -45° 48.9 inches (1241 mm) 157
17.8 dBi 800 10360 0°–10° +45° and -45° 71.8 inches (1823 mm) 158
850 10010 Flexible Sealing Frame for Trisector Antenna 159
Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 127/365
1710–2170 MHz Panel AntennaX Polarization
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–12° electrical downtilt
0 0
3
0 6
90
0 2 1
0 5
1
180 0 1
2
0 4 2
270
0 0 3
0 3 3
3
10
20
30
0 0
3
0 6
90
0 2 1
0 5
1
180 0 1
2
0 4 2
270
0 0 3
0 3 3
3
10
20
30
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–19 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)(180° ± 30°)
Connector 2 x 7-16 DIN femaleIsolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Trascking, average 1 dB
Squint ±1°
Weight 26.5 lb (12 kg)30.9 lb (14 kg) clamps included
Dimensions 40.6 x 11.8 x 2.7 inches(1032 x 299 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 95 lbf / 25 lbf / 117 lbf
(420 N) / (110 N) / (520 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 52.6 x 13.3 x 4.4 inches(1336 x 337 x 112 mm)
Shipping weight 33.5 lb (15.2 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 19.2 dBi 19.5 dBi 19.8 dBi
Horizontal beamwidth 36° (half-power) 35° (half-power) 33° (half-power)
Vertical beamwidth 9.2° (half-power) 9° (half-power) 8.5° (half-power)
Electrical downtilt 0°–12° 0°–12° 0°–12°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 6° 12° T 0° 6° 12° T 0° 6° 12° Tfirst sidelobe above horizon 15 17 17 dB 15 17 17 dB 15 17 17 dBHorizontal pattern >18 dB >17 dB >15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±30° >10 dB >10 dB >10 dB
11299-A936.3929/A
1710-2170
-45°1710-2170
+45°
7-16 DIN 7-16 DIN
–45 +45
11.8 inches
(299 mm)
45.2 inches(1149 mm)
40.6 inches(1032 mm)
2.7 inches(69 mm)
43.7 inches(1109 mm)
2.625 inches ± 0.125(68 mm ± 4)
35°
1710–2170 MH
X - POL
Adjustable Electrical D
0°–12°
Remote Control Op
800 10251V0
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 128/36512
1710–2170 MHz Panel AntennaX Polarization
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–8° electrical downtilt
–45 +45
11.8 inches
(299 mm)
55.9 inches
(1421 mm)
51.3 inches(1304 mm)
2.7 inches
(69 mm)
54.4 inches(1381 mm)
2.625 inches ± 0.125(68 mm ± 4)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)
Connector 2 x 7-16 DIN female
Isolation >30 dBMaximum input power 300 watts (at 50°C) per input
Tracking 0.5 dB
Squint ±1°
Weight 29.8 lb (13.5 kg)34.2 lb (15.5.kg) clamps included
Dimensions 51.3 x 11.8 x 2.7 inches(1304 x 299 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 122 lbf / 31 lbf / 144 lbf
(540 N) / (135 N) / (640 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62.6 x 12.7 x 4.3 inches(1589 x 322 x 108 mm)
Shipping weight 36.4 lb (16.5 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 20.2 dBi 20.5 dBi 20.7 dBi
Horizontal beamwidth 36° (half-power) 35° (half-power) 33° (half-power)
Horizontal sidelobe suppression >14 dB >14 dB >14 dB
Vertical beamwidth 7.4° (half-power) 7° (half-power) 6.7° (half-power)
Electrical downtilt 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression for: 0° 4° 8° T 0° 4° 8° T 0° 4° 8° TFirst sidelobe above main beam 18 17 16 dB 18 18 17 dB 18 17 16 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±30° >10 dB >10 dB >10 dB
11280-A936.3977/a
1710-2170-45°
1710-2170+45°
7-16 DIN 7 -16 DIN
35°
1710–2170 MHz
X - POL
justable Electrical Downtilt
0°–8°
Remote Control Option
742 351V01
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 129/365
1710–2170 MHz Panel AntennaX Polarization
Vertical pattern±45°- polarization
0–8° electrical downtilt
Horizontal pattern±45°- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking 0.5 dB
Squint ±1.5°
Weight 23.1 lb (10.5 kg)27.6 lb (12.5.kg) clamps included
Dimensions 51.4 x 7.8 x 2.7 inches(1306 x 199 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 102 lbf / 33 lbf / 111 lbf
(450 N) / (145 N) / (490 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 63.1 x 8.7 x 4.2 inches(1604 x 221 x 107 mm)
Shipping weight 32 lb (14.5 kg)
56.8 inches(1442 mm)
51.4 inches(1306 mm)
2.7 inches(69 mm)
7.8 inches(199 mm)
2.5 inches
(64 mm)
55.6 inches(1412 mm)
1710-2170+45°
7-16 DIN
7-16 DIN1710-2170
-45°
11289-B936.3939/a
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 19 dBi 19.5 dBi 19.6 dBi
Front-to-back ratio >27 dB (co-polar) >30 dB (co-polar) >27 dB (co-polar)(180°±30) >25 dB (total power) >25 dB (total power) >25 dB (total power)
Horizontal beamwidth 47° (half-power) 45° (half-power) 44° (half-power)
Vertical beamwidth 7.3° (half-power) 7° (half-power) 6.7° (half-power)
Electrical downtilt 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)
Sidelobe suppression: 0° 2° 5° 8° T 0° 2° 5° 8° T 0° 2° 5° 8° Tfirst sidelobeabove main beam 17 17 15 15 dB 18 18 17 17 dB 18 18 15 15 dBHorizontal pattern >18 dB >18 dB >18 dB
Cross polar ratioMain direction 0° 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±30° >13 dB >13 dB >13 dB
45°
1710–2170 MH
X - POL
Adjustable Electrical D
0°–8°
Remote Control Op
742 218V0
Profile PF6
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 130/36514
1710–2180 MHz Panel AntennaX Polarization
General specifications:
Frequency range 1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking, average 1 dB
Squint ±2°
Weight 30.9 lb (14 kg)35.3 lb (16.kg) clamps included
Dimensions 76.6 x 7.8 x 2.7 inches(1946 x 199 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 158 lbf / 50 lbf / 167 lbf
(700 N) / (220 N) / (740 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 88.3 x 8.7 x 4.2 inches(2244 x 221 x 107 mm)
Shipping weight 39.7 lb (18 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain tilt 0° 3° 6° 0° 3° 6° 0° 3° 6°dBi 20.5 20.6 20.3 20.9 21.1 20.9 21 21.4 21
Front-to-back ratio >28 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar)(180°±30°) >25 dB (total power) >25 dB (total power) >25 dB (total power)
Horizontal beamwidth 48° (half-power) 45° (half-power) 44° (half-power)
Vertical beamwidth 4.7° (half-power) 4.5° (half-power) 4.4° (half-power)
Electrical downtilt 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Sidelobe suppression: 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tfirst sidelobe above main beam 18 18 16 16 dB 18 18 17 16 dB 18 18 17 16 dBHorizontal pattern >18 dB >18 dB >18 dB
Cross polar ratioMain direction 0° 19 dB (typical) 18 dB (typical) 17 dB (typical)Sector ±30° >13 dB >13 dB >13 dB
Vertical pattern±45°- polarization
0–6° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
11290-B936.3941/a
1710/2180
+45°7-16 DIN
7-16 DIN1710/2180
-45°
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
82 inches
(2082 mm)
76.6 inches
(1946 mm)
2.7 inches(69 mm)
7.8 inches
(199 mm)
80.8 inches
(2052 mm)
2.5 inches(64 mm)
45°
1710–2180 MHz
X - POL
justable Electrical Downtilt
0°–6°
Remote Control Option
742 219V01
Profile PF6
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 131/365
1710–2200 MHz Split Beam Panel AntennaXX Polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
742 034 Three-panel Sector Mounting Kit(120 deg. ea.) for 5.5 inch(139.7 mm) OD mast.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2200 MHz
Azimuth direction Beam A (-30°), Beam B (+30°)
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45°, -45°, +45°, -45°
Front-to-back ratio >30 dB (co-polar)>25 dB (total power)
Maximum input power 200 watts per input (at 50°C)
Connector 4 x 7-16 DIN female
Isolation >30 dB
Horizontal patternSidelobe suppression for >18 dBsidelobes beside main beam
Vertical patternSidelobe suppression for >18 dBfirst sidelobe above main beam
Electrical downtilt 0°–10° (continuously adjustable)
Weight 41.9 lb (19 kg)46.3 lb (21 kg) clamps included
Dimensions 51.7 x 15 x 5.9 inches (1314 x 380 x 150 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 160 lbf / 45 lbf / 185 lbf
(710 N) / (200 N) / (820 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 66.8 x 15.8 x 6.8 inches(1696 x 402 x 172 mm)
11308-A936.4001/a
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 4 x 19 dBi 4 x 19.3 dBi 4 x 19.5 dBi
Horizontal beamwidth 47° (half-power) 45° (half-power) 43° (half-power)(offset beams ±30°)
Vertical beamwidth 7.2° (half-power) 7.1° (half-power) 6.8° (half-power
Cross polar ratioMain direction -30°; +30° 18 dB (typical) 17 dB (typical) 16 dB (typical)Sector -60°; 0°; 0°; +60° >13 dB >13 dB >13 dB
45°
1710–2200 MH
XX - POL
Adjustable Electrical D
0°–10°
Remote Control Op
800 10606V0
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
Beam A (-30°), Beam B (+30°)
0–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2200+45
Beam B(+30)
1710–2200+45
Beam A(–30)
7-16 7-16
1710–2200–45
Beam B(+30)
7-16
1710–2200–45
Beam A(–30)
7-16
51.7 inches
(1314 mm)
5.9 inches(150 mm)
15 inches
(380 mm)
59.6 inches(1514 mm)
58.4 inches
(1484 mm)
2.625 inches ± 0.125
(68 mm ± 4)
R C UR C U
– 4 5 ° + 4 5 ° + 4 5 °
– 4 5 °
Layout of interface B e
a m B ( + 3
0 ° )B e
a m A ( – 3 0 ° )
Mounting Clamps Included
Beam A Beam B
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 132/36516
30°
210°
60°
240°
90°270°
120°
300°
150°
330°
180°
0°
Antenna IBeam A
Antenna IIBeam B
Antenna IIBeam A
Antenna IIIBeam B
Antenna IIIBeam A
Antenna IBeam B
0
3
6
10
20
D o u t
4 7 0 m m
Antenna I
Antenna IIAntenna III
Horizontal Patterns (top view)
Bottom view
A
Torque 5.9 ft-lb
(8 Nm)
B
C
D
60°
Mounting support clamp
E
F
3 sector clamp
(supports the antenna assemblyduring azimuth adjustment)
Specifications: 742 034 Sector Bracket
Angle between antennas 120°
Suitable for mast diameter* 5.5 inches (139.7 mm) OD.
Number of pieces 2 x 3 sector clamp2 x mounting support clamp
Materials3 sector clamp Hot-dip galvanized steelMounting support clamp AluminumFasteners Stainless steel
Outer diameter (Dout) of the 18.5 inches (470 mm)3 Dual-beam Panel Arrangement
* Customer assumes all responsibility to ensure that the mountingpipe is adequate to support the intended load. For use with steelpipe only (not aluminum) with a minimum 0.25 inch (6 mm) wall
thickness.
1710–2200 MHz Split Beam Panel AntennaXX Polarization
800 10606V01
Specifications: 3 Panel Arrangement
Weight 130.1 lb (59 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 214 lbf / 214 lbf / 214 lbf
(950 N) / (950 N) / (950 N)
Wind survival rating 120 mph (200 kph)
Dimensions: 742 034 sector bracket with 800 10606 antennasA B C D E F Dout
inches 5.5 3.9 9.3 9 1.9 1.8 18.5mm 139.7 100 236 228 49 45 470
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 133/365
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Electrical downtilt 0–8 degreescontinuously adjustable
Tracking 0.5 dB
Squint ±1.5°
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 55.4 x 6.1 x 2.8 inches(1407 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 81 lbf / 32 lbf / 81 lbf
(360 N) / (140 N) / (360 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 65.8 x 6.8 x 4.4 inches
(1672 x 172 x 112 mm)Shipping weight 22 lb (10 kg)
1710–2200 MHz Panel AntennaX Polarization
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 18.3 dBi 18.7 dBi 19 dBi
+45° and -45° polarization 65° (half-power) 62° (half-power) 59° (half-power)horizontal beamwidth
+45° and -45° polarization 6.6° (half-power) 6.2° (half-power) 5.9° (half-power)vertical beamwidth
Front-to-back ratio (180°±3°) >30 dB >30 dB >28 dB
Sidelobe suppression for 0° 4° 8° 0° 4° 8° 0° 4° 8°first sidelobe above main beam >18 14 14 dB >18 15 15 dB >18 15 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11235-A936.3588/a
62°
1710–2200 MH
X - POL
Adjustable Electrical D
0°–8°
Remote Control Op
800 10636
Vertical pattern±45°- polarization
0–8° electrical downtilt
Horizontal pattern
±45°- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200–45
1710–2200+45
7-16 7-16
6.1 inches
(155 mm)
55.4 inches
(1407 mm)
58.3 inches(1480 mm)
2.8 inches(70 mm)
57 inches
(1449 mm)
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PF10
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 134/36518
General specifications:
Frequency range 1710–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female (long neck)
Electrical downtilt 0°–12° (continously adjustable)
(manual or remote control)Isolation, between ports >30 dB
Maximum input power 250 watts (at 50°C) per input
Weight 11 lb (5 kg)
Dimensions 33.5 x 6.1 x 2.8 inches(851 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 48 lbf / 14 lbf / 50 lbf
(210 N) / (60 N) / (220 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 45.1 x 6.8 x 3.6 inches(1146 x 172 x 92 mm)
Shipping weight 14.3 lb (6.5 kg)
1710–2690 MHz Panel AntennaX Polarization
Specifications: 1710–1990 MHz 1920–2200 MHz 2200–2490 MHz 2490–2690 MHz
Gain 15.5 dBi 16.3 dBi 16.7 dBi 16.7 dBi
+45° and -45° polarization 67° (half-power) 64° (half-power) 60° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 10.8° (half-power) 9.9° (half-power) 8.8° (half-power) 8.4° (half-power)vertical beamwidth
Front-to-back ratio >25 dB >25 dB >23 dB >23 dB(180°±30°)
Sidelobe suppression for: 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >12 13 15 dB >13 14 15 dB >13 14 16 dB >15 15 17 dB
Cross polar ratio 0° 25 dB (typical) 28 dB (typical) 28 dB (typical) 28 dB (typical)Sector ±60° >9 dB >8 dB >8 dB >11 dB
11214-B936.4019/a
Mounting Equipment:
Model Description
734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–25 degrees downtilt angle for use with
2 x 738 546 mounting kit
Reference the Mechanical Accessories section.
6.1 inches
(155 mm)
–45 +45
33.5 inches(851 mm)
36.5 inches(926 mm)
2.8 inches(70 mm)
35.3 inches(896 mm)
2.625 inches ±
0.125
65°
1710–2690 MHz
X - POL
ustable Electrical Downtilt
0°–12°
Remote Control Option
800 10681
Profile PF5
1710–2690–45
1710–2690+45
7-16 7-16
Vertical pattern±45°- polarization
0–12° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 135/365
General specifications:
Frequency range 1710–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Electrical downtilt 0°–12° (continously adjustable)
(manual or remote control)Isolation, between ports >30 dB
Maximum input power 250 watts (at 50°C) per input
Weight 24.3 lb (11 kg)28.7 lb (13 kg) clamps included
Dimensions 33.7 x 12.7 x 2.8 inches(855 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 99 lbf / 23 lbf / 104 lbf
(440 N) / (100 N) / (460 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 45.1 x 13.3 x 4.1 inches(1146 x 337 x 104 mm)
Shipping weight 32 lb (14.5 kg)
1710–2690 MHz Panel AntennaXX Polarization
Specifications: 1710–1990 MHz 1920–2200 MHz 2200–2490 MHz 2490–2690 MHz
Gain 15.8 dBi 16.2 dBi 16.6 dBi 16.7 dBi
+45° and -45° polarization 65° (half-power) 64° (half-power) 60° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 11° (half-power) 10° (half-power) 9° (half-power) 8.7° (half-power)vertical beamwidth
Front-to-back ratio (co-polar) >30 dB >30 dB >30 dB >28 dB
Sidelobe suppression for 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >12 13 15 dB >13 14 16 dB >13 15 16 dB >15 15 17 dB
Cross polar ratio 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >8 dB >8 dB >8 dB >10 dB
11215-A936.3770/b
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–25 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2690 MH1710–2690 MH
XX - POL
Adjustable Electrical D
0°–12°Remote Control Op
800 10682
1710–2690–45
1710–2690+45
7-16 7-16
1710–2690+45
7-16
1710–2690–45
7-16
33.7 inches(855 mm)
41.7 inches(1066 mm)
2.8 inches
(71 mm)
36.2 inches(920 mm)
2.625 inches ± 0.125(68 mm ± 4)
12.7 inches
(323 mm)
Vertical pattern±45°- polarization
0–12° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 136/36520
General specifications:
Frequency range 1710–2170 MHz / 2490–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Isolation >30 dB (intrasystem)
>29 dB (intersystem)Weight 22 lb (10 kg)
26.5 lb (12 kg) clamps included
Dimensions 55.5 x 6.1 x 3.5 inches(1410 x 155 x 89 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 84 lbf / 33 lbf / 90 lbf
(370 N) / (145 N) / (400 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 69.5 x 7.2 x 4.8 inches(1765 x 182 x 122 mm)
Shipping weight 30.9 lb (14 kg)
1710–2170 MHz / 2490–2690 MHz Panel AntennaXX Polarization
Specifications: 1710–1990 MHz 1920–2170 MHz 2490–2690 MHz
Gain 17.5 dBi 17.7 dBi 18 dBi+45° and -45° polarization 68° (half-power) 65° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 6.7° (half-power) 6.3° (half-power) 5.4° (half-power)vertical beamwidth
Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB
Electrical downtilt 0–10 degrees 0–10 degrees 0–10 degreescontinuously adjustable
Sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam >17 17 16 dB >17 17 16 dB >17 17 16 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >8 dB >8 dB >10 dB
Maximum input power 200 watts per input 200 watts per input(at 50°C) 400 watts total 400 watts total
11311-B936.3803/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle
Reference the Mechanical Accessories section.
65°
1710–2170 MHz2490–2690 MHz
XX - POL
justable Electrical Downtilt
0°–10°
800 10644
2490–2690 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2170 MHz
Horizontal pattern
±45°- polarization
Vertical pattern
±45°- polarization0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
Profile PF11
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 137/365
55.5 inches(1410 mm)
59.4 inches(1509 mm)
3.5 inches(89 mm)
58.2 inches(1479 mm)
6.1 inches(155 mm)
2.625 inches ± 0.125(68 mm ± 4)
1710–2170+45
2490–2690–45
7-16 7-16
1710–2170–45
7-16
2490–2690+45
7-16
1710–2170 MHz / 2490–2690 MHz Panel AntennaXX Polarization
800 10644
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 138/36522
1710–2200 MHz Panel AntennaX Polarization
11298-A936.3924/b
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking, average 0.5 dB
Squint ±2°
Weight 9.9 lb (4.5 kg)
Dimensions 28.9 x 6.1 x 2.7 inches(735 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 44 lbf / 16 lbf / 50 lbf
(195 N) / (70 N) / (220 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 40 x 6.8 x 3.6 inches(1015 x 172 x 92 mm)
Shipping weight 12.1 lb (5.5 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHzGain tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°
dBi 15.5 15.4 15.3 15.1 15.6 15.5 15.4 15 15.8 15.7 15.5 14.9
+45° and -45° polarization 67° (half-power) 66° (half-power) 64° (half-power)horizontal beamwidth
+45° and -45° polarization 12.9° (half-power) 12.3° (half-power) 11.5° (half-power)vertical beamwidth
Electrical downtilt 0°–12° 0°–12° 0°–12°continously adjustable
Front-to-back ratio >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)
Sidelobe suppressionfor first sidelobe tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°above main beam dB > 14 14 14 14 14 14 14 14 14 14 14 14
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–12° electrical downtilt
7 -16 DIN 7-16 DIN
1710/2200-45°
1710/2200+45°
–45 +45
28.9 inches(735 mm)
32.2 inches(819 mm)
2.7 inches(69 mm)
31 inches
(789 mm)
6.1 inches(155 mm)
2.5 inches(64 mm)
65°
1710–2200 MHz
X - POL
ustable Electrical Downtilt0°–12°
Remote Control Option
800 10247V01
Profile PF5
Mounting Equipment:
Model Description
734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.
732 327 Tilt Kit for use with the abovemounting kits,0–40 degrees downtilt angle.
Reference the Mechanical Accessories section.
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 139/365
–45 +45
51.7 inches(1314 mm)
54.6 inches(1386 mm)
2.8 inches(70 mm)
53.4 inches(1356 mm)
6.1 inches(155 mm)
2.5 inches(64 mm)
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Electrical downtilt 2–10 degreescontinuously adjustable
Tracking 0.5 dB
Squint ±1.5°
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 51.7 x 6.1 x 2.8 inches(1314 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 21 lbf / 77 lbf
(330 N) / (90 N) / (340 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62.8 x 6.8 x 3.6 inches
(1595 x 172 x 92 mm)Shipping weight 22 lb (10 kg)
1710–2200 MHz Panel AntennaX Polarization
11236-A936.3531/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2200 MH
X - POL
Adjustable Electrical D
2°–10°
Remote Control Op
800 10614V0
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.3 dBi 17.7 dBi 18 dBi
+45° and -45° polarization 66° (half-power) 64° (half-power) 62° (half-power)horizontal beamwidth
+45° and -45° polarization 7.9° (half-power) 7.5° (half-power) 7.2° (half-power)vertical beamwidth
Front-to-back ratio (180°±3°) >25 dB >25 dB >25 dB
Sidelobe suppression forfirst sidelobe above main beam >15 dB >17 dB >18 dB
Sidelobe suppressionin the sector 40°–180° below >23 dB >24 dB >25 dBhorizon for Tx-Frequencies
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
1710–2200–45
1710–2200+45
7-16 7-16
Vertical pattern±45°- polarization
2°–10° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 140/36524
1710–2690 MHz Panel AntennaX Polarization
11261-A936.3887b
General specifications:
Frequency range 1710–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts per inputTracking 1.0 dB
Squint ±2.5°
Weight 17.6 lb (8 kg)22 lb (10 kg) clamps included
Dimensions 55.1 x 6.1 x 2.7 inches(1400 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 84 lbf / 31 lbf / 95 lbf
(370 N) / (135 N) / (420 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 66.3 x 6.8 x 3.6 inches(1685 x 172 x 92 mm)
Shipping weight 25.1 lb (11.4 kg)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Kit for use with above mounting kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 1710–1990 MHz 1920–2200 MHz 2200–2490 MHz 2490–2690 MHz
Gain 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T17.4 17.4 17.3 dBi 18.2 18 17.9 dBi 18.2 18.1 17.7 dBi 18.3 18 17.6 dBi
Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB
+45° and -45° polarization 68° (half-power) 64° (half-power) 61° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 7.1° (half-power) 6.5° (half-power) 5.9° (half-power) 5.7° (half-power)vertical beamwidth
Electrical downtilt 0°–12° 0°–12° 0°–12° 0°–12°continuously adjustable (manual or optional remote control)
Sidelobe suppression 0° 6° 12° T 0° 6° 12° T 0° 6° 12° 0° 6° 12° Tfirst sidelobe above main beam >18 18 18 dB >18 18 18 dB >18 17 17 dB >18 18 16 dBwithin 0°–20° sector above horizon >17 17 16 dB >17 17 16 dB >16 18 17 dB >15 15 14 dB
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB
65°
1710–2690 MHz
X - POL
ustable Electrical Downtilt0°–12°
Remote Control Option
800 10621V01
Profile PF8
55.1 inches(1400 mm)
58.4 inches(1484 mm)
57.2 inches(1454 mm)
2.5 inches(64 mm)
1710–2690–45
1710–2690+45
7-16 7-16
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–12° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
2.7 inches
(69 mm)
6.1 inches(155 mm)
–45 +45
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 141/365
1710–2690 MHz Panel AntennaXX Polarization
11237-B936.3621/b
General specifications:
Frequency range 1710–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Electrical downtilt 0°–12° (continously adjustable)(manual or remote control)
Isolation, between ports >30 dB
Maximum input power 300 watts (at 50°C) per input
Weight 39.7 lb (18 kg)44.1 lb (20 kg) clamps included
Dimensions 55.7 x 12.7 x 2.8 inches(1415 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 162 lbf / 38 lbf / 167 lbf
(720 N) / (165 N) / (740 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 67.2 x 13.3 x 4.4 inches(1706 x 337 x 112 mm)
Shipping weight 48.5 lb (22 kg)
Specifications: 1710–1990 MHz 1920–2200 MHz 2200–2490 MHz 2490–2690 MHz
Gain 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T17.4 17.4 17.3 dBi 17.8 17.6 17.5 dBi 18 17.9 17.5 dBi 18 17.7 17.3
dBi
+45° and -45° polarization 65° (half-power) 65° (half-power) 61° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 7.1° (half-power) 6.5° (half-power) 5.9° (half-power) 5.7° (half-power)vertical beamwidth
Front-to-back ratio (180°±30°) >25 dB, avg 28 dB >26 dB, avg 28 dB >25 dB, avg 27 dB >25 dB, avg 27 dB
Sidelobe suppression for: 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >18 18 18 dB >18 18 18 dB >18 17 17 dB >18 18 17 d
Cross polar ratio 0° 30 dB (typical) 30 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >8 dB >10 dB
65°
1710–2690 MH1710–2690 MH
XX - POL
Adjustable Electrical D
0°–12°Remote Control Op
800 10622
Profile PF8
55.7 inches(1415 mm)
59.8 inches(1520 mm)
58.3 inches(1480 mm)
2.625 inches ± 0.125(68 mm ± 4) 1710–2690
–45
1710–2690+45
7-16 7-16
1710–2690+45
7-16
1710–2690–45
7-16
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Kit for use with above mounting kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–12° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
2.8 inches
(71 mm)
12.7 inches(323 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 142/36526
1710–2170 MHz Panel AntennaX Polarization
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio 30 dB (co-polar)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–8 degreescontinuously adjustable (manual or optional remote control)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Tracking 1 dB
Squint ±2.5°
Weight 9.9 lb (4.5 kg)14.3 lb (6.5 kg) clamps included
Dimensions approx. 45 x 6.1 x 2.8 inches (1142 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 66 lbf / 18 lbf / 68 lbf
(290 N) / (80 N) / (300 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.1 x 6.8 x 3.7 inches (1425 x 172 x 95 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 17.5 dBi 17.7 dBi 18 dBi
+45° and -45° polarization 66° (half-power) 64° (half-power) 62° (half-power)horizontal beamwidth
+45° and -45° polarization 8.3° (half-power) 7.8° (half-power) 7.4° (half-power)vertical beamwidth
Sidelobe suppression for: 0° 4° 8° T 0° 4° 8° T 0° 4° 8° T
1st sidelobe above horizon, avg. 20 20 20 dB 20 20 20 dB 20 20 20 dB
Cross polar ratio 0° 25 dB (typical) 25 dB (typical) 28 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11266-A936.3886/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2170 MHz
X - POL
ustable Electrical Downtilt
0°–8°
Remote Control Option
742 214V01
46.7 inches(1186 mm)
6.1 inches
(155 mm)
45 inches(1142 mm)
2.8 inches(70 mm)
2.5 inches(64 mm)
47.9 inches(1216 mm)
1710–2170-45°
1710–2170+45°
7 -16 DIN 7-16 DIN
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–8° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 143/365
1710–2200 MHz Panel AntennaX Polarization
General specifications:
Frequency range 1710–2200 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)(180° ±30°) >25 dB (total power)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–10 degreescontinuously adjustable
Connector 2 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Tracking, average 0.5 dB
Squint ±1.5°
Weight 14.3 lb (6.5 kg)18.3 lb (8.3 kg) clamps included
Dimensions 51.7 x 6.1 x 2.8 inches(1314 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 21 lbf / 77 lbf
(330 N) / (90 N) / (340 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62.8 x 6.8 x 3.6 inches(1595 x 172 x 92 mm)
Shipping weight 22 lb (10 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.7 dBi 17.9 dBi 18 dBi
+45° and -45° polarization 68° (half-power) 66° (half-power) 64° (half-power)horizontal beamwidth
+45° and -45° polarization 7.1° (half-power) 6.8° (half-power) 6.4° (half-power)vertical beamwidth
Vertical Pattern–sidelobe 0° 4° 8° 10° 0° 4° 8° 10° 0° 4° 8° 10°suppression for first side- 18 18 17 17 dB 18 18 17 17 dB 18 18 17 17 dBlobe above main beam
11272-A936.3733/b
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–10° electrical downtilt
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–13 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200-45°
1710–2200+45°
7-16 DIN 7-16 DIN
53.4 inches(1356 mm)
51.7 inches(1314 mm)
54.6 inches(1386 mm)
2.5 inches(64 mm)
65°
1710–2200 MH
X - POL
Adjustable Electrical D
0°–10°
Remote Control Op
742 215V01
6.1 inches(155 mm)
2.8 inches(70 mm) Profile PF10
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 144/36528
1710–2200 MHz Panel AntennaX Polarization with Integrated Remote Downtilt
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2200 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)>25 dB (total power)
Maximum input power 120 watts per input (at 50°C)
Electrical downtilt 0–10 degreescontinuously adjustable
Connector 2 x 7- 16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Weight 16.5 lb (7.5 kg)
Dimensions 51.3 x 6.1 x 2.7 inches (1302 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 26 lbf / 88 lbf
(330 N) / (115 N) / (390 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 55.3 x 6.8 x 3.6 inches (1404 x 172 x 92 mm)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
10920-F936.2890/e
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.7 dBi 17.9 dBi 18 dBi
+45° and -45° polarization 67° (half-power) 66° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 7.1° (half-power) 6.8° (half-power) 6.6° (half-power)vertical beamwidth
Sidelobe suppression for 0° 4° 8° 10° 0° 4° 8° 10° 0° 4° 8° 10°first sidelobe above main beam 16 16 16 16 dB 17 17 17 17 dB 17 17 17 17 dB
IRT specifications:
Power supply 10–30 V
Power Consumption < 1 W (standby); < 8.5 W (motor activated)
Hardware interface1 2 x 8 pin connector according to IEC 60130-9;IRT in (male): Control / Daisy chain in, conforming with AISGIRT out (female): Daisy chain out, conforming with AISG
Logical interface2 AISG 1.1 800 10314ex factory 3GPP / AISG 2.0 800 10618
Protocols AISG 1.1 and 3GPP / AISG 2.0 compliant
Adjustment time (full range) 40 seconds
Adjustment cycles >50,000
Certification FCC 15.107 Class B Computing Devices
65°
1710–2200 MHz
X - POL
djustable Electrical Downtilt
0°–10°
with IntegratedRemote Downtilt
00 10314, 800 10618
Profile PF51 Tightening torque for fixing the connector must
lie between 0.5 – 1.0 Nm (0.36–0.73 lb/ft).
2 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand. Start-up operation of the 800
10314 is only possible with a primary stationsupporting AISG 1.1 and start-up operationof the 800 10618 is only possible with aprimary station supporting 3GPP/AISG 2.0!Please note: The used Primary-SW has tobe able to handle also integrated remote tiltunits, like Kathrein CCU with firmware 1.29or higher and the Kathrein PCA with SW 2.0or higher. If the Primary of the system doesn’tsupport the standard of the ‘logical interfaceex factory’, the IRT must be switched to theappropriate standard of the Primary beforeinstallation. Please contact Kathrein for furtherinformation.
Order Information:
Model Description
800 10314 Antenna with AISG 1.1 linterface0°–10° adjustable electrical downtilt
800 10618 Antenna with 3GPP / AISG 2.0 interface
0°–10° adjustable electrical downtilt
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 145/365
6.1 inches
(155 mm)
54.6 inches
(1386 mm)
51.3 inches
(1302 mm)
2.7 inches
(69 mm)
53.4 inches(1356 mm)
2.5 inches(64 mm)
–45 +45
800 10314, 800 101710–2200 MHz Panel Antenna X Polarization with Integrated Remote Downtilt
Connecting the control cables:
1. Stand alone / Star configuration:Connect the control cable to the ‘IRT in’ input of the antenna. If daisy chain is notrequired, do not remove the protection cap of the ‘IRT out’ input.
2. Daisy chain configuration:For the daisy chain solution, remove the protection cap (IRT out) and create a bondingto the subsequent antenna (IRT in) via additional control cable. Do not removethe protection cap of the last ‘IRT out’.
Please note: The connector should be hand tightened only!
The tightening torque must be in the range of 0.37–0.74 lb/ft (0.5 – 1.0 Nm).
25
3
7 8 6
1
4
Pin 1 10 ... 30 VDC in 10 ... 30 VDC out
Pin 2 Not connected Not connected
Pin 3 RS485-B RS485-B
Pin 4 Not connected Not connected
Pin 5 RS485-A RS485-A
Pin 6 10 ... 30 VDC in 10 ... 30 VDC out
Pin 7 DC return DC return
(grounded) (grounded)
Pin 8 Not connected Not connected
2
8
4
1 3
5
6 7
Pin assignment for IRT interface:
8 - p i n c o n n e c t o r
( I E C
6 0 1 3 0 - 9 )
male female
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 800 10314, 800 10618
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 146/36530
1710–2200 MHz Panel Antenna with Extended Downtilt RangeX- polarization
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–15° electrical downtilt
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking, average 1.5 dB
Squint ±2°
Weight 14.3 lb (6.5 kg)18.7 lb (8.5 kg) clamps included
Dimensions 54.6 x 6.1 x 2.7 inches(1387 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 81 lbf / 23 lbf / 84 lbf
(360 N) / (100 N) / (370 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 65.2 x 6.8 x 3.6 inches(1655 x 172 x 92 mm)
11305-A936.3927/b
–45 +45
54.6 inches(1387 mm)
2.7 inches(69 mm)
57.4 inches(1459 mm)
6.1 inches(155 mm)
2.5 inches
(64 mm)
56.3 inches(1429 mm)
65°
1710–2200 MHz
X - POL
justable Electrical Downtilt0°–15°
800 10504V01
Profile PF5
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2000–2200 MHz
Gain 17.5 dBi 17.6 dBi 17.7 dBi 17.8 dBi
Front-to-back ratio (180° ±30°) > 25 dB (co-polar) > 25 dB (co-polar) > 25 dB (co-polar) > 25 dB (co-polar)
Horizontal beamwidth 68° (half-power) 66° (half-power) 64° (half-power) 62° (half-power)
Vertical beamwidth 7.9° (half-power) 7.5° (half-power) 7.2° (half-power) 7° (half-power)
Electrical downtilt 0°–15° 0°–15° 0°–15° 0°–15°continuously adjustable (manual or optional remote control)
Sidelobe suppression 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° Tfirst sidelobe above main beam >17 20 18 17 dB >16 20 18 17 dB >16 20 18 17 dB >15 20 18 15 dBwithin 0°–20° sector above horizon >16 18 18 16 dB >16 18 17 16 dB >15 18 17 16 dB >15 16 16 15 dB
Cross polar ratio
Main direction 0° 22 dB (typical) 22 dB (typical) 24 dB (typical) 26 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB
Null-fill at 0° tilt 21 dB 20 dB 19 dB 18 dB
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 147/365
1710–2200 MHz Panel Antenna with Extended Downtilt RangeX- polarization
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Trackin, average 0.5 dBSquint ±2.5°
Weight 24.3 lb (11 kg)28.7 lb (13kg) clamps included
Dimensions 78.1 x 6.1 x 2.7 inches(1984 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 117 lbf / 43 lbf / 142 lbf
(520 N) / (190 N) / (630 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 89.1 x 6.8 x 3.6 inches(2264 x 172 x 92 mm)
Shipping weight 33.1 lb (15 kg)
11306-B936.3928/a
–45 +45
78.1 inches
(1984 mm)
2.7 inches(69 mm)
81.4 inches
(2068 mm)
6.1 inches(155 mm)
2.5 inches(64 mm)
80.2 inches
(2038 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2000–2200 MHz
Gain 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T(dBi) 18.5 18.7 18.5 18.7 19 18.5 18.7 19 18.4 18.7 18.9 18.3
Front-to-back ratio (180° ±30°) > 30 dB (co-polar) > 30 dB (co-polar) > 27 dB (co-polar) > 26 dB (co-polar)
Horizontal beamwidth 67° (half-power) 65° (half-power) 64° (half-power) 63° (half-power)
Vertical beamwidth 5° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tfirst sidelobe above main beam >20 20 18 18 dB >20 20 18 18 dB >19 20 18 18 dB >18 20 18 18 dBwithin 0°–20° sector above horizon >18 18 17 17 dB >17 18 17 15 dB >17 17 17 15 dB >17 17 14 12 dB
Cross polar ratioMain direction 0° 25 dB (typical) 22 dB (typical) 22 dB (typical) 22 dB (typical)Sector ±60° >11 dB >11 dB >11 dB >10 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2200 MH
X - POL
Adjustable Electrical D0°–10°
800 10505V0
Profile PF5
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 148/36532
1710–2200 MHz Panel AntennaX Polarization
General specifications:
Frequency range 1710–2200 MHz
VSWR < 1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)(180°±30°) >25 dB (total power)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–6 degreescontinuously adjustable
Connector 2 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Tracking, average 0.5 dB
Squint ±2.0°
Weight 19.8 lb (9 kg)24.3 lb (11 kg) clamps included
Dimensions 76.9 x 6.1 x 2.8 inches(1954 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 115 lbf / 32 lbf / 115 lbf
(510 N) / (140 N) / (510 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 88 x 6.8 x 3.6 inches(2235 x 172 x 92 mm)
Shipping weight 28.7 lb (13 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 19 dBi 19.2 dBi 19.5 dBi
+45° and -45° polarization 67° (half-power) 65° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 4.7° (half-power) 4.5° (half-power) 4.3° (half-power)vertical beamwidth
Sidelobe suppression for first 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tsidelobe above main beam 18 18 16 15 dB 18 18 17 16 dB 18 18 18 18 dB
11271-B936.3740/b
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Kit for use with above mounting kits,(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200-45°
1710–2200+45°
7 -16 DIN 7 -16 D IN
78.6 inches(1996 mm)
6.1 inches
(155 mm)
76.9 inches(1954 mm)
2.8 inches(70 mm)
2.5 inches(64 mm)
79.8 inches(2026 mm)
65°
1710–2200 MHz
X - POL
ustable Electrical Downtilt
0°–6°
Remote Control Option
742 213V01
Profile PF5
Vertical pattern±45°- polarization
0–6° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 149/365
1710–2690 MHz Panel AntennaX- polarization
General specifications:
Frequency range 1710–2690 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Electrical downtilt 0°–6° (continously adjustable)(manual or remote control)
Isolation, between ports >30 dB
Maximum input power 300 watts (at 50°C) per input
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 65.7 x 6.1 x 2.8 inches(1670 x 155 x 70 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 97 lbf / 26 lbf / 99 lbf
(430 N) / (115 N) / (440 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 70.9 x 6.8 x 3.6 inches(1800 x 172 x 92 mm)
11377-A936.4200
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2690 MH
X - POL
Adjustable Electrical D
0°–6°
800 10651
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–6° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Specifications: 1710–1990 MHz 1920–2170 MHz 2170–2490 MHz 2490–2690 MHz
Gain 18.5 dBi 19 dBi 19.4 dBi 19.5 dBi
+45° and -45° polarization 67° (half-power) 63° (half-power) 60° (half-power) 58° (half-power)horizontal beamwidth
+45° and -45° polarization 5.4° (half-power) 4.9° (half-power) 4.3° (half-power) 4° (half-power)vertical beamwidth
Front-to-back ratio >28 dB >28 dB >25 dB >25 dB(180°±30°)
Sidelobe suppression for: 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° TFirst sidelobe above main beam >16 17 16 dB >17 17 16 dB >17 17 16 dB >17 17 17 dB
Cross polar ratio 0° 20 dB (typical) 30 dB (typical) 30 dB (typical) 30 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB
65.7 inches
(1670 mm)
68.6 inches(1742 mm)
67.4 inches(1712 mm)
2.5 inches(64 mm)
2.8 inches(70 mm)
6.1 inches(155 mm)
–45 +45
1710–2690
–45
1710–2690
+45
7-16 7-16
NE W
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 150/36534
1710–2200 MHz Panel AntennaX- polarization
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 20.6 dBi 21.1 dBi 21.2 dBi
+45° and -45° polarization 65° (half-power) 62° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 3.7° (half-power) 3.5° (half-power) 3.3° (half-power)vertical beamwidth
Front-to-back ratio (180°±3°) >30 dB >28 dB >28 dB
Sidelobe suppression for 0° 3° 6° 0° 3° 6° 0° 3° 6°first sidelobe above main beam >18 18 17 dB >18 17 17 dB >17 17 17 dB
First null-fill at 0° tilt 20 dB 20 dB 20 dB
Cross polar ratioMain direction 0° 25 dB (typical) 23 dB (typical) 23 dB (typical)
Sector ±60° >10 dB >10 dB >10 dB
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputElectrical downtilt 0–6 degreescontinuously adjustable
Tracking, average 1.0 dB
Squint ±2.5°
Weight 28.7 lb (13 kg)32.6 lb (14.8 kg) clamps included
Dimensions 100.3 x 6.1 x 3.5 inches(2548 x 155 x 89 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 149 lbf / 59 lbf / 165 lbf
(660 N) / (260 N) / (730 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 116.9 x 6.8 x 4.4 inches(2970 x 172 x 112 mm)
Shipping weight 34.2 lb (15.5 kg)
11026-A936.3921
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–8 degrees downtilt angle.
Reference the Mechanical Accessories section.
65°
1710–2200 MHz
X - POL
ustable Electrical Downtilt
0°–6°
800 10378
1710–2200–45
1710–2200+45
7-16 7-16
6.1 inches(155 mm)
100.3 inches(2548 mm)
103.7 inches(2635 mm)
3.5 inches(89 mm)
102.6 inches(2605 mm)
2.625 inches ± 0.125(68 mm ± 4)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–6° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Profile PF11
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 151/365
1710–2200 MHz Panel Antenna with Extended Downtilt RangeXX- polarization
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0–15° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputWeight 37.5 lb (17 kg)
41.9 lb (19 kg) clamps included
Dimensions 54.7 x 12.7 x 2.8 inches(1389 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 158 lbf / 36 lbf / 162 lbf
(700 N) / (160 N) / (720 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 66.4 x 13.3 x 4.4 inches(1686 x 337 x 112 mm)
Shipping weight 46.3 lb (21 kg)
11307-A936.3986/a
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2000–2200 MHz
Gain 17.5 dBi 17.6 dBi 17.7 dBi 17.8 dBi
Front-to-back ratio > 30 dB (co-polar) > 30 dB (co-polar) > 30 dB (co-polar) > 28 dB (co-polar)(180° ±30°)
Horizontal beamwidth 65° (half-power) 63° (half-power) 62° (half-power) 62° (half-power)
Vertical beamwidth 7.9° (half-power) 7.5° (half-power) 7.2° (half-power) 6.9° (half-power)
Electrical downtilt 0°–15° 0°–15° 0°–15° 0°–15°continuously adjustable (manual or optional remote control)
Sidelobe suppression 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° Tfirst sidelobe above main beam >17 20 18 17 dB >16 20 18 18 dB >15 19 18 17 dB >14 18 18 16 dBwithin 0°–20° sector above horizon >17 18 18 16 dB >16 17 17 16 dB >15 17 17 16 dB >14 16 16 15 dB
Cross polar ratioMain direction 0° 24 dB (typical) 24 dB (typical) 24 dB (typical) 26 dB (typical)Sector ±60° >9 dB >9 dB >10 dB >10 dB
Null-fill at 0° tilt 23 dB 22 dB 21 dB 20 dB
65°
1710–2200 MH
XX - POL
Adjustable Electrical D
0°–15°
Remote Control Op
800 10510V0
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
54.7 inches(1389 mm)
2.8 inches(71 mm)
58.8 inches(1494 mm)
12.7 inches
(323 mm) 3.9 inches(98 mm)
56.5 inches(1436 mm)
2.625 inches ± 0.125
(68 mm ± 4)
64.4 inches(1636 mm)
1710–2200 Left
–45 –45
+45
Right 1710–2200+45
RCURCU
Layout of interface
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 152/36536
1710–2200 MHz Panel Antenna with Extended Downtilt RangeXX- polarization
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-153 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputWeight 39.7 lb (18 kg)
44.1 lb (20 kg) clamps included
Dimensions 78.7 x 12.7 x 2.8 inches(1999 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 230 lbf / 52 lbf / 243 lbf
(1020 N) / (230 N) / (1080 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 90.4 x 13.3 x 4.4 inches(2296 x 337 x 112 mm)
Shipping weight 48.5 lb (22 kg)
11337-B936.4057/a
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2000–2200 MHz
Gain (dBi) 18.5 18.7 18.5 18.7 19 18.5 18.7 19 18.4 18.7 18.9 18.3Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°
Front-to-back ratio > 30 dB (co-polar) > 30 dB (co-polar) > 30 dB (co-polar) > 28 dB (co-polar)(180° ±30°)
Horizontal beamwidth 66° (half-power) 65° (half-power) 65° (half-power) 63° (half-power)
Vertical beamwidth 5° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tfirst sidelobe above main beam >20 20 18 18 dB >20 20 18 18 dB >19 20 18 18 dB >18 20 18 18 dBwithin 0°–20° sector above horizon >18 18 17 17 dB >17 18 17 15 dB >17 17 17 15 dB >17 17 14 12 dB
Cross polar ratioMain direction 0° 22 dB (typical) 22 dB (typical) 22 dB (typical) 22 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
78.7 inches(1999 mm)
2.8 inches(71 mm)
82.8 inches(2104 mm)
12.7 inches(323 mm)
3.9 inches(98 mm)
81.3 inches(2064 mm)
2.625 inches ± 0.125
(68 mm ± 4)
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
65°
1710–2200 MHz
XX - POL
ustable Electrical Downtilt
0°–10°
Remote Control Option
800 10511V01
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 153/365
1710–2170 MHz Panel Antenna
X Polarization
Vertical pattern±45°- polarization
0–10° electrical downtilt
Horizontal pattern±45°- polarization
Mounting Equipment:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
732 327 Tilt Kit for use with the above(optional) mounting kits,
0–20 degrees downtilt angle.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >25 dB (co-polar)>25 dB (total power)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per input
Tracking 0.5 dB
Squint ±3.5°
Weight 9.3 lb (4.2 kg)
Dimensions 26.1 x 6.1 x 2.7 inches(662 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 40 lbf / 15 lbf / 45 lbf
(175 N) / (65 N) / (200 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 36.8 x 6.8 x 3.6 inches(935 x 172 x 92 mm)
Shipping weight 12 lb (5.5 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 13.7 dBi 14 dBi 14.1 dBi
Horizontal beamwidth 88° (half-power) 88° (half-power) 88° (half-power)
Vertical beamwidth 14.7° (half-power) 14° (half-power) 13° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tfirst sidelobe above horizon 18 18 18 18 dB 18 18 18 18 dB 18 18 18 18 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11283-A936.3957/a
1710–2170
-45°
1710–2170
+45°
7- 16 DIN 7 -16 D IN
88°
1710–2170 MH
X - POL
Adjustable Electrical D
0°–10°
Remote Control Op
741 988V0
Profile PF5
26.1 inches(662 mm)
2.5 inches(68 mm)
29.3 inches(746 mm)
28.2 inches(716 mm)
6.1 inches
(155 mm)
2.7 inches(69 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 154/36538
1710–2200 MHz Panel AntennaX Polarization
1710–2200-45°
1710–2200+45°
7-16 DIN 7 -16 DIN
General specifications:
Frequency range 1710–2200 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–8 degreescontinuously adjustable
Connector 2 x 7-16 DIN female
Isolation >30 dB
Tracking 0.5 dB
Squint ±2.0°
Weight 16.5 lb (7.5 kg)20.9 lb (9.5 kg) clamps included
Dimensions 51.3 x 6.1 x 2.7 inches(1302 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 79 lbf / 29 lbf / 90 lbf
(350 N) / (125 N) / (400 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62 x 6.8 x 3.6 inches(1574 x 172 x 92 mm)
Shipping weight 25.4 lb (11.5 kg)
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–8° electrical downtilt
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
11268-A936.3843/a
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 16.5 dBi 16.8 dBi 16.7 dBi
±45° polarization 88° (half-power) 88° (half-power) 88° (half-power)horizontal beamwidth
±45° polarization 7° (half-power) 6.7° (half-power) 6.5° (half-power)vertical beamwidth
Sidelobe suppressionfor first sidelobe 0° 2° 5 8° T 0° 2° 5° 8° T 0° 2° 5° 8° Tabove main beam 18 18 16 14 dB 20 20 18 17 dB 18 18 18 17 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >24 dB (co-polar)
(180°±30°) >25 dB (total power) >25 dB (total power) >24 dB (total power)
53.4 inches(1356 mm)
51.3 inches(1302 mm)
2.5 inches(68 mm ± 4)
54.6 inches(1386 mm)
88°
1710–2200 MHz
X - POL
ustable Electrical Downtilt
0°–8°
Remote Control Option
741 989V01
Profile PF5
6.1 inches(155 mm)
2.7 inches(69 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 155/365
1710–2170 MHz Panel AntennaX Polarization
Vertical pattern±45°- polarization
0–6° electrical downtilt
Horizontal pattern
±45°- polarization
78.6 inches(1996 mm)
76.5 inches(1942 mm)
2.5 inches(68 mm ± 4)
79.8 inches(2026 mm)
1710–2170-45°
1710–2170+45°
7 -16 D IN 7-16 DIN
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 17.7 dBi 18 dBi 18.2 dBi
+45° and -45° polarization 88° (half-power) 88° (half-power) 88° (half-power)horizontal beamwidth
+45° and -45° polarization 4.9° (half-power) 4.7° (half-power) 4.5° (half-power)vertical beamwidth
Sidelobe suppression for first 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tsidelobe above main beam 17 17 17 17 dB 18 18 18 18 dB 18 18 18 18 dB
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >25 dB (co-polar)>25 dB (total power)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–6 degreescontinuously adjustable (manual or optional remote control)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 20 dB (typical)Sector ±60° >10 dB
Tracking 0.5 dB
Squint ±2.5°
Weight 24.3 lb (11 kg)28.7 lb (13.kg) clamps included
Dimensions 76.5 x 6.1 x 2.7 inches (1942 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 115 lbf / 42 lbf / 138 lbf
(510 N) / (185 N) / (610 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 87.2 x 6.8 x 3.6 inches (2214 x 172 x 92 mm)
Shipping weight 30.9 lb (14 kg)
11284-A936.3926/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
88°
1710–2170 MH
X - POL
Adjustable Electrical D0°–6°
Remote Control Op
741 990V01
Profile PF5
6.1 inches(155 mm)
2.7 inches(69 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 156/36540
1710–2170 MHz Panel AntennaXX- polarization
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Front-to-back ratio >25 dB (co-polar)>25 dB (total power)
Connector 4 x 7-16 DIN female
Isolation >30 dB
Maximum input power 250 watts (at 50°C) per input
Weight 24.3 lb (11 kg)28.7 lb (13 kg) clamps included
Dimensions 26.8 x 12.7 x 2.8 inches(679 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 79 lbf / 20 lbf / 84 lbf
(350 N) / (85 N) / (370 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 36.4 x 14.2 x 5.1 inches(924 x 360 x 130 mm)
Shipping weight 30.9 lb (14 kg)
11291-A936.3985/a
0 0
3
0 6
90
0 2 1
0 5
1
180 0 1
2
0 4 2
270
0 0 3
0 3 3
3
10
20
30
0 0
3
0 6
90
0 2 1
0 5 1
180 0
1 2
0 4 2
270
0 0 3
0 3
3
3
10
20
30
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0–10° electrical downtilt
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–54 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 15 dBi 15.2 dBi 15.3 dBi
Horizontal beamwidth 67° (half-power) 65° (half-power) 62° (half-power)
Vertical beamwidth 14° (half-power) 13.7° (half-power) 13° (half-power)
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for first 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tsidelobe above main beam 16 16 15 15 dB 16 16 16 16 dB 16 16 16 16 dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° 10 dB (typical) 10 dB (typical) 10 dB (typical)
1710–2170 Left
–45 –45
+45
Right 1710–2170+45
RCURCU
Layout of interface
26.8 inches(679 mm)
2.8 inches
(71 mm)
35 inches(889 mm)
3.9 inches
(98 mm)
12.7 inches(323 mm)
29.3 inches(744 mm)
2.625 inches ± 0.125
(68 mm ± 4)
742 233V01
65°
1710–2170 MHz1710–2170 MHz
XX-POL
ustable Electrical Downtilt0°–10°
Remote Control Option
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 157/365
1710–2170 MHz Panel AntennaXX- polarization
11293-C936.4021/d
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)
Maximum input power 250 watts per input (at 50°C)
Electrical downtilt 0–8 degrees
continuously adjustable (manual or optional remote control)Connector 4 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Weight 27.6 lb (12.5 kg)32 lb (14.5 kg) clamps included
Dimensions 45.2 x 12.7 x 2.8 inches (1147 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 133 lbf / 31 lbf / 138 lbf
(590 N) / (135 N) / (610 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.9 x 13.3 x 4.1 inches (1446 x 337 x 104 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 17.5 dBi 17.7 dBi 18 dBi
+45° and -45° polarization 65° (half-power) 63° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 8.3° (half-power) 8° (half-power) 7.5° (half-power)vertical beamwidth
Sidelobe suppression for first 0° 4° 8° T 0° 4° 8° T 0° 4° 8° Tsidelobe above main beam 20 20 18 dB 20 20 18 dB 20 20 18 dB
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–18 degrees downtilt angle.
Reference the Mechanical Accessories section.
2.8 inches(71 mm)
12.7 inches
(323 mm)
53.4 inches
(1357 mm)
45.2 inches
(1147 mm)
47.7 inches
(1212 mm)
2.625 inches ± 0.125
(68 mm ± 4)
3.9 inches
(98 mm)
742 237
65°
1710–2170 MH1710–2170 MH
XX-POL
Adjustable Electrical D
0°–8°
Remote Control Op
Profile PF8
1710–2170 Left
–45 –45
+45
Right 1710–2170
+45RCURCU
Layout of interface
Vertical pattern±45°- polarization
0–8° electrical downtilt
Horizontal pattern
±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps IncludedNE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 158/36542
1710–2200 MHz Panel AntennaXX- polarization
11273-B936.3781/a
General specifications:
Frequency range 1710–2200 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)>25 dB (total power)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–10 degreescontinuously adjustable (manual or optional remote control)
Connector 4 x 7-16 DIN female
Isolation >30 dB
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Weight 33.1 lb (15 kg)37.5 lb (17 kg) clamps included
Dimensions 51.9 x 12.7 x 2.8 inches (1319 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 149 lbf / 35 lbf / 156 lbf
(660 N) / (155 N) / (690 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62 x 14.2 x 5.1 inches (1574 x 360 x 130 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.6 dBi 17.8 dBi 18 dBi
+45° and -45° polarization 64° (half-power) 64° (half-power) 62° (half-power)horizontal beamwidth
+45° and -45° polarization 7° (half-power) 6.8° (half-power) 6.5° (half-power)vertical beamwidth
Sidelobe suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 20 18 16 dB 20 18 16 dB 16 18 16 dB
Vertical pattern±45°- polarization0–10° electrical
Horizontal pattern
±45°- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
2.8 inches(71 mm)
12.7 inches
(323 mm)
60.2 inches
(1529 mm)
51.9 inches
(1319 mm)
54.5 inches
(1384 mm)
2.625 inches ± 0.125
(68 mm ± 4)
3.9 inches
(98 mm)
742 236V01
65°
1710–2200 MHz1710–2200 MHz
XX-POL
ustable Electrical Downtilt
0°–10°
Remote Control Option
Profile PF81710–2200 Left
–45 –45
+45
Right 1710–2200+45 RCURCU
Layout of interface
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 159/365
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–11 degrees downtilt angle.
Reference the Mechanical Accessories section.
Vertical pattern±45°- polarization
0–6° electrical downtilt
Horizontal pattern
±45°- polarization
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 19 dBi 19.2 dBi 19.5 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)>25 dB (total power) >25 dB (total power) >24 dB (total power)
Horizontal beamwidth 65° (half-power) 64° (half-power) 63° (half-power)
Vertical beamwidth 4.6° (half-power) 4.4° (half-power) 4.2° (half-power)
Electrical downtilt 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)
Vertical Pattern – Sidelobe 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tsuppression for first 17 17 14 14 dB 17 17 15 15 dB 17 17 15 15 dBsidelobe above main beam
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 4 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking, average 0.5 dB
Squint ±2.5°
Weight 39.7 lb (18 kg)44.1 lb (20 kg) clamps included
Dimensions 77.1 x 12.7 x 2.8 inches(1959 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 228 lbf / 50 lbf / 234 lbf
(1010 N) / (220 N) / (1040 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 93.9 x 14.2 x 5.1 inches(2384 x 360 x 130 mm)
Shipping weight 48.5 lb (22 kg)
11292-B936.3993/a
1710–2170 MHz Panel AntennaXX- polarization
2.8 inches(71 mm)
3.9 inches(98 mm)
12.7 inches
(323 mm)
85.4 inches(2169 mm)
79.7 inches(2024 mm)
2.625 inches ± 0.125(68 mm ± 4)
77.1 inches(1959 mm)
742 235V01
65°
1710–2170 MH1710–2170 MH
XX-POL
Adjustable Electrical D0°–6°
Remote Control Op
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 160/36544
General specifications:
Frequency range 1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150dBc
Polarization +45° and -45°
Front-to-back ratio >24 dB (co-polar)>24 dB (total power)
Maximum input power 300 watts per input (at 50°C)
Electrical downtilt 0–10 degreescontinuously adjustable
Connector 4 x 7-16 DIN female
Isolation intrasystem >30 dBintersystem >30 dB
Tracking 0.5 dB
Squint ±2.5°
Weight 37.5 lb (17 kg)41.9 lb (19 kg) clamps included
Dimensions 51.9 x 12.7 x 2.8 inches(1319 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 149 lbf / 35 lbf / 156 lbf
(660 N) / (155 N) / (690 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 62 x 14.2 x 5.1 inches(1574 x 360 x 130 mm)
Shipping weight 43 lb (19.5 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain (dBi) 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T16.1 16.3 16 16.2 16.4 16.1 16.5 16.7 16.2
+45° and -45° polarization 88° (half-power) 90° (half-power) 88° (half-power)horizontal beamwidth
+45° and -45° polarization 7.4° (half-power) 7° (half-power) 6.5° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable(manual or optional remote control)
Vertical Pattern – Sidelobe 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tsuppression for first 18 17 16 15 dB 18 17 16 15 dB 17 17 16 15 dBsidelobe above main beam
Cross polar ratio (typical)Main direction 0° 15 dB 15 dB 15 dBSector ±60° >8 dB >7.5 dB >7 dB
11281-B936.3948/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0 0
3
0 6
90
0 2 1
0 5
1
180 0
1 2
0 4 2
270
0 0 3
0 3 3
3
10
20
30
0 0
3
0 6
90
0 2 1
0 5
1
180
0 1
2
0 4 2
0 0 3
0 3 3
3
10
20
30
1710–2180 MHz Panel AntennaXX- polarization
12.7 inches(323 mm)
60.2 inches(1529 mm)
51.9 inches(1319 mm)
54.5 inches(1384 mm)
2.8 inches(71 mm)
2.625 inches ± 0.125(68 mm ± 4)
3.9 inches(98 mm)
742 352V01
88°
1710–2180 MHz1710–2180 MHz
XX-POL
ustable Electrical Downtilt0°–10°
Remote Control Option
Profile PF8
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 161/365
1710–2170 MHz Panel AntennaX- polarization
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 8.5 dBi 8.6 dBi 8.7 dBi
Front-to-back ratio >25 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
+45° and -45° polarization 70° (half-power) 68° (half-power) 65° (half-power)horizontal beamwidth
+45° and -45° polarization 65° (half-power) 65° (half-power) 63° (half-power)vertical beamwidth
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
7 -16 D IN 7-16 DIN
1710-2170-45°
1710-2170+45°
Mounting Equipment:
Model Description
734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.
Reference the Mechanical Accessories section.
11288-B936.3969/a
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.4:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Maximum input power 150 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Isolation >30 dB
Tracking, average 1 dB
Squint ±3°
Weight 3.3 lb (1.5 kg)
Dimensions 6.1 x 6.1 x 2.7 inches (155 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 12 lbf / 3 lbf / 13 lbf
(50 N) / (13 N) / (55 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 10.1 x 6.8 x 3.6 inches (257 x 172 x 92 mm)
Shipping weight 4.4 lb (2 kg)
6.1 inches(155 mm)
9.4 inches(239 mm)
2.7 inches(69 mm)
6.1 inches(155 mm)
2.5 inches(64 mm)
8.2 inches(209 mm)
68°
1710–2170 MH
X - POL
0° Electrical Down
742 210V01
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 162/36546
1710–2170 MHz Panel AntennaX- polarization
11268-A936.3862/a
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 150 watts (at 50°C) per inputTracking 0.5 dB
Squint ±1.5°
Weight 4.9 lb (2.2 kg)
Dimensions 13.5 x 6.1 x 2.7 inches(342 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 21 lbf / 7 lbf / 24 lbf
(90 N) / (27 N) / (105 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 17.5 x 6.8 x 3.6 inches(444 x 172 x 92 mm)
Shipping weight 7.1 lb (3.2 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 11.5 dBi 12 dBi 12 dBi
+45° and -45° polarization 67° (half-power) 65° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 32° (half-power) 30° (half-power) 28° (half-power)vertical beamwidth
Electrical downtilt 3° 2° 0°
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >27 dB (co-polar)
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
7-16 DIN 7 -16 D IN
1710-2170-45°
1710-2170+45°
Mounting Equipment:
Model Description
734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.
732 327 Tilt Kit for use with the above(optional) mounting kits,
0–36 degrees downtilt angle.
Reference the Mechanical Accessories section.
13.5 inches(342 mm)
16.8 inches(426 mm)
15.6 inches(396 mm)
2.7 inches(69 mm)
6.1 inches(155 mm)
2.5 inches(64 mm)
65°
1710–2170 MHz
X - POL
2° Electrical Downtilt
739 489V01
Profile PF5
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
2° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 163/365
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.4:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Maximum input power 300 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Isolation >30 dBCross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB
Tracking, average 0.5 dB
Squint ±1.5°
Weight 9.9 lb (4.5 kg)
Dimensions 28.9 x 6.1 x 2.7 inches (735 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 42 lbf / 15 lbf / 50 lbf
(185 N) / (65 N) / (220 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 39.4 x 6.8 x 3.7 inches (1000 x 172 x 95 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 15.3 dBi 15.6 dBi 15.8 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >25 dB (total power) >25 dB (total power) >25 dB (total power)
+45° and -45° polarization 67° (half-power) 66° (half-power) 64° (half-power)horizontal beamwidth
+45° and -45° polarization 12.6° (half-power) 11.8° (half-power) 11° (half-power)vertical beamwidth
Sidelobe suppression for >14 dB >16 dB >14 dBfirst sidelobe above horizon
11287-A936.3968/a
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0 0
3
0 6
90
0 2 1
0 5
1
180 0
1 2
0 4 2
270
0 0 3
0 3
3
3
10
20
30
0 0
3
0 6
90
0 2 1
0 5
1
180 0
1 2
0 4 2
270
0 0 3
0 3 3
3
10
20
30
1710-2170-45°
7-16
1710-2170+45°
7-16
6.1 inches(155 mm)
32.2 inches(819 mm)
28.9 inches(735 mm)
2.7 inches(69 mm)
31.1 inches(789 mm)
2.5 inches(64 mm)
Mounting Equipment:
Model Description
734 365 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.
850 10013 Tilt Kit for use with above mounting kit(optional) 0–50 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2170 MHz Panel AntennaX- polarization
65°
1710–2170 MH
X - POL
0° Electrical Down
742 196V01
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 164/36548
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 300 watts (at 50°C) per inputTracking, average 0.5 dB
Squint ±1.5°
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 51.3 x 6.1 x 2.7 inches(1302 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 26 lbf / 88 lbf
(330 N) / (115 N) / (390 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.9 x 6.8 x 3.6 inches(1445 x 172 x 92 mm)
Shipping weight 22.5 lb (10.2 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.9 dBi 18.1 dBi 18.3 dBi
+45° and -45° polarization 67° (half-power) 66° (half-power) 64° (half-power)horizontal beamwidth
+45° and -45° polarization 6.6° (half-power) 6.2° (half-power) 5.8° (half-power)vertical beamwidth
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)
Sidelobe suppression for >14 dB >15 dB >16 dBfirst sidelobe above main beam
First null-fill 25 dB (typical) 25 dB (typical) 25 dB (typical)below main beam
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
11269-A936.3818/a
51.3 inches(1302 mm)
54.6 inches(1386 mm)
2.7 inches(69 mm)
53.4 inches(1356 mm)
2.5 inches(64 mm)
–45 +45
6.1 inches(155 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200 MHz Panel AntennaX- polarization
65°
1710–2200 MHz
X - POL
0° Electrical Downtilt
800 10425V01
Profile PF5
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2200–45
1710–2200+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 165/365
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Electrical downtilt 2 degrees
Isolation >30 dBMaximum input power 300 watts (at 50°C) per input
Tracking, average 0.5 dB
Squint ±1.5°
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 51.3 x 6.1 x 2.7 inches(1302 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 26 lbf / 88 lbf
(330 N) / (115 N) / (390 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.9 x 6.8 x 3.6 inches(1445 x 172 x 92 mm)
Shipping weight 22 lb (10 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.9 dBi 18.1 dBi 18.3 dBi
+45° and -45° polarization 66° (half-power) 65° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 6.6° (half-power) 6.2° (half-power) 5.8° (half-power)vertical beamwidth
Front-to-back ratio >28 dB (co-polar) >30 dB (co-polar) >33 dB (co-polar)
Sidelobe suppression for >14 dB >15 dB >15 dBfirst sidelobe above main beam
First null-fill 25 dB (typical) 25 dB (typical) 25 dB (typical)below main beam
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)
Sector ±60° >10 dB >10 dB >10 dB
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
2° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
7-16 DIN 7 -16 DIN
1710/2200-45°
1710/2200+45°
11303-A936.3983/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200 MHz Panel AntennaX- polarization
51.3 inches(1302 mm)
54.6 inches(1386 mm)
2.7 inches(69 mm)
53.4 inches(1356 mm)
2.5 inches(64 mm)
–45 +45
6.1 inches(155 mm)
65°
1710–2200 MH
X - POL
2° Electrical Down
800 10426V0
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 166/36550
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.3:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: < -150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Electrical downtilt 6 degrees
Isolation >30 dBMaximum input power 300 watts (at 50°C) per input
Tracking, average 0.5 dB
Squint ±1.5°
Weight 15.4 lb (7 kg)19.8 lb (9 kg) clamps included
Dimensions 51.3 x 6.1 x 2.7 inches(1302 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 75 lbf / 26 lbf / 88 lbf
(330 N) / (115 N) / (390 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 56.9 x 6.8 x 3.6 inches(1445 x 172 x 92 mm)
Shipping weight 22 lb (10 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHz
Gain 17.7 dBi 17.9 dBi 18.1 dBi
+45° and -45° polarization 67° (half-power) 65° (half-power) 63° (half-power)horizontal beamwidth
+45° and -45° polarization 6.7° (half-power) 6.3° (half-power) 5.8° (half-power)vertical beamwidth
Front-to-back ratio >27 dB (co-polar) >33 dB (co-polar) >33 dB (co-polar)
Sidelobe suppression for >14 dB >14 dB >15 dBfirst sidelobe above main beam
First null-fill 25 dB (typical) 25 dB (typical) 25 dB (typical)below main beam
Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB
Horizontal pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Vertical pattern±45°- polarization
6° electrical downtilt
11304-A936.4036/a
7 -16 DIN 7-16 DIN
1710/2200-45°
1710/2200+45°
51.3 inches(1302 mm)
54.6 inches(1386 mm)
2.7 inches(69 mm)
53.4 inches(1356 mm)
2.5 inches(64 mm)
–45 +45
6.1 inches(155 mm)
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–16 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710–2200 MHz Panel AntennaX- polarization
65°
1710–2200 MHz
X - POL
6° Electrical Downtilt
800 10428V01
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 167/365
1710–2170 MHz Panel AntennaX- polarization
11285-A936.3937/a
General specifications:
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Maximum input power 300 watts per input (at 50°C)
Connector 2 x 7-16 DIN female
Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >14 dB
Isolation >30 dB
Tracking 0.5 dB
Aquint ±1°
Weight 20.9 lb (9.5 kg)25.4 lb (11.5.kg) clamps included
Dimensions 85 x 6.1 x 2.7 inches (2160 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 131 lbf / 45 lbf / 151 lbf
(580 N) / (200 N) / (670 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 89.4 x 6.8 x 3.6 inches (2304 x 172 x 92 mm)
Shipping weight 29.5 lb (13.4 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 20 dBi 20.2 dBi 20.5 dBi
Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >28 dB (total power) >28 dB (total power) >27 dB (total power)
+45° and -45° polarization 67° (half-power) 65° (half-power) 61° (half-power)horizontal beamwidth
+45° and -45° polarization 4° (half-power) 3.8° (half-power) 3.5° (half-power)vertical beamwidth
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–10 degrees downtilt angle.
Reference the Mechanical Accessories section.
1710-2170-45°
1710-2170+45°
7-16 DIN 7 -16 D IN
85 inches(2160 mm)
2.7 inches(69 mm)
6.1 inches
(155 mm)
88.3 inches
(2244 mm)
87.2 inches(2214 mm)
2.5 inches
(64 mm)
65°
1710–2170 MH
X - POL
0° Electrical Down
742 186V01
Profile PF5
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 168/36552
1710–2200 MHz Panel AntennaX Polarization
General specifications:
Frequency range 1710–2200 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Connector 2 x 7-16 DIN female
Isolation, between ports >30 dB
Maximum input power 300 watts (at 50°C) per inputSidelobe suppression forfirst sidelobe above main beam >15 dB0° –30° sector above horizon >15 dB
First null-fill below main beam < 20 dB
Tracking, average 0.5 dB
Squint ±1.0°
Weight 25.4 lb (11.5 kg)29.8 lb (13.5 kg) clamps included
Dimensions 85.5 x 6.1 x 3.5 inches(2172 x 155 x 89 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 124 lbf / 48 lbf / 138 lbf
(550 N) / (210 N) / (610 N)Mounting category M (Medium)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 92.1 x 6.8 x 4.8 inches(2340 x 172 x 122 mm)
Shipping weight 34.2 lb (15.5 kg)
11270-A936.3815/a
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Mount Kit(optional) 0–9 degrees downtilt angle.
Reference the Mechanical Accessories section.6.1 inches
(155 mm)
89.6 inches(2276 mm)
3.5 inches
(89 mm)
88.4 inches
(2246 mm)
2.625 inches ± 0.125
(68 mm ± 4)
85.5 inches(2172 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2000–2200 MHz
Gain 20.5 dBi 20.8 dBi 21.1 dBi 21.2 dBi
+45° and -45° polarization 66° (half-power) 63° (half-power) 60° (half-power) 58° (half-power)horizontal beamwidth
+45° and -45° polarization 4.2° (half-power) 4° (half-power) 3.7° (half-power) 3.5° (half-power)vertical beamwidth
Front-to-back ratio >30 dB >30 dB >30 dB >30 dB(180°±30°)
Cross polar ratioMain direction 0° 25 dB 23 dB 23 dB 23 dBSector ±60° >12 dB >12 dB >10 dB >10 dB
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
65°
1710–2200 MHz
X - POL
0° Electrical Downtilt
800 10439V01
Profile PF9
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 169/365
1710–2170 MHz Panel AntennaX- polarization
Mounting Equipment:
Model Description
734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.
Reference the Mechanical Accessories section.
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.4:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° and -45°
Front-to-back ratio >23 dB (co-polar)(180° ±30°) >23 dB (total power)
Connector 2 x 7-16 DIN female
Isolation >30 dB
Maximum input power 150 watts (at 50°C) per input
Tracking 0.5 dB
Squint ±3°
Weight 4.4 lb (2 kg)
Dimensions 13.5 x 6.1 x 2.7 inches(342 x 155 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 21 lbf / 7 lbf / 24 lbf
(90 N) / (27 N) / (105 N)Mounting category L (Light)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 17.5 x 6.8 x 3.6 inches(444 x 172 x 92 mm)
Shipping weight 6.6 lb (3 kg)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain 11.3 dBi 11.5 dBi 11.6 dBi
+45° and -45° polarization 86° (half-power) 87° (half-power) 88° (half-power)horizontal beamwidth
+45° and -45° polarization 28° (half-power) 26° (half-power) 26° (half-power)vertical beamwidth
Sidelobe suppressionvertical sector ±45° >20 dB >20 dB >20 dB
Cross polar ratioMain direction 0° 20 dB (typical) 25 dB (typical) 20 dB (typical)Sector ±60° >18 dB >18 dB >15 dB
11282-A936.3938/a
13.5 inches(342 mm)
16.8 inches(426 mm)
2.7 inches(69 mm)
2.5 inches(64 mm)
6.1 inches(155 mm)
15.6 inches
(396 mm)
88°
1710–2170 MH
X - POL
0° Electrical Down
741 984V0
Profile PF5
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2170–45
1710–2170+45
7-16 7-16
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 170/36554
1710–2180 MHz Panel AntennaV- polarization
800 10368
13°
1710–2180 MHz
V - POL
Mounting Equipment:
Model Description
2 X 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
Reference the Mechanical Accessories section.
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
H-planeHorizontal pattern
V- polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
E-planeVertical patternV- polarization
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz
Average gain 18.1 dBi 18.4 dBi 18.7 dBi
H-plane beamwidth 13.3° (half-power) 12.8° (half-power) 12° (half-power)
Sidelobe suppression >18 dB >18 dB >17 dBhorizontal pattern
E-plane beamwidth 37° (half-power) 36° (half-power) 36° (half-power)Sidelobe suppression for >18 dB >18 dB >18 dBfirst sidelobe above main beamvertical pattern
General specifications:
Frequency range 1710–2180 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150dBc
Polarization Vertical
Front-to-back ratio >30 dB (co-polar)(180° ± 30°)
Maximum input power 300 watts per input (at 50°C)
Connector 7-16 DIN female
Weight 19.8 lb (9 kg)
Dimensions 29.3 x 11.8 x 3 inches(743 x 299 x 69 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 77 lbf / 6 lbf / 90 lbf
(340 N) 6 (25 N) / (400 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 33.5 x 17.4 x 4.9 inches(852 x 442 x 124 mm)
10908-B936.2945/b
11.8 inches(299 mm)
3 inches
(77 mm)
29.3 inches
(743 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 171/365
2496–2690 MHz Panel AntennaX Polarization
11097-A
42 inches(1067 mm)
45.3 inches(1151 mm)
44.1 inches(1120 mm)
2.7 inches(69 mm)
2.5 inches(64 mm )
6.1 inches(155 mm)
48°
2496–2690 MH
X - POL
Adjustable Electrical D
0°–10°
Remote Control Op
840 10046
Profile PF5
Mounting Equipment:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Kitfor use with the 2 x 738 546 mounting kit0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
Specifications:
Frequency range 2496–2690 MHz
Gain 18 dBi
Impedance 50 ohms
VSWR < 1.43:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >27 dB typical
Maximum input power 300 watts (at 50°C)+45° and -45° polarization 48 degrees at midband (half power)horizontal beamwidth
+45° and -45° polarization 7 degrees at midband (half power)vertical beamwidth
Electrical downtilt 0–10 degreescontinously adjustable
Connector 2 x 7-16 DIN female
Sidelobe suppression for 0° 4° 8° 10°first sidelobe above horizon 15 15 15 15 dB (typical)
Cross polar ratio 25 dB typical bore sight15 dB typical ±45° sector edges
Null fill > -1 dBi to 12° below horizon (typical)
Isolation >30 dB
Weight 10 lb (4.5 kg)
Dimensions 42 x 6.1 x 2.7 inches(1067 x 155 x 69 mm)
Equivalent flat plate area 2.5 ft2 (0.23 m2)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 48 x 6.8 x 3.6 inches(1220 x 172 x 92 mm)
Shipping weight 13.6 lb (6.2 kg)
Mounting Fixed and tilt-mount options areavailable for 2 to 5.7 inch(50 to 145 mm) OD masts.
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 172/36556
Designed for MIMO applications,
a single adjustment mechanism
controls the left and right antennassimultaneously through the
0°–10° downtilt range.
11210-C
Specifications:
Frequency range 2496–2690 MHz
Gain 2 x 16 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >23 dB typical
Maximum input power 300 watts (at 50°C)
+45° and -45° polarization 87 degrees at midband (half power)horizontal beamwidth
+45° and -45° polarization 7 degrees at midband (half power)vertical beamwidth
Electrical downtilt 0–10 degreescontinously adjustable
Connector 4 x 7-16 DIN female
Sidelobe suppression for 0° 4° 8° 10°first sidelobe above horizon 15 15 15 15 dB (typical)
Cross polar ratio 15 dB typical bore sight10 dB typical ±60° sector edges
Null fill > -1 dBi to 12° below horizon (typical)
Isolation >30 dB
Weight 30 lb (13.6 kg)
Dimensions 42 x 12.7 x 2.8 inches(1067 x 323 x 71 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 113 lbf / 21 lbf / 117 lbf
(500 N) / (90 N) / (520 N)
Wind survival rating 150 mph (240 kph)
Shipping dimensions 48 x 13.3 x 5.1 inches(1220 x 337 x 130 mm)
Shipping weight 34 lb (15.4 kg)
2496–2690 MHz Panel AntennaXX Polarization
87°
2496–2690 MHz
XX - POL
ustable Electrical Downtilt
0°–10°
Remote Control Option
840 10054B
Mounting Equipment:
Model Description
2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.
850 10013 Tilt Kit for use with the2 x 738 546 mounting kit0–15 degrees downtilt angle.
Reference the Mechanical Accessories section.
42 inches(1067 mm)
45.3 inches
(1151 mm)
2.8 inches(71 mm)
44.1 inches
(1120 mm)
2.625 inches ± 0.125
(68 mm ± 4)
12.7 inches(323 mm)
Horizontal pattern±45°- polarization
0° electrical downtilt
Vertical pattern±45°- polarization
0° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Horizontal pattern±45°- polarization
5° electrical downtilt
Vertical pattern±45°- polarization
5° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Horizontal pattern±45°- polarization
10° electrical downtilt
Vertical pattern±45°- polarization
10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Adjusts left and right
simultaneously.
2496–2690 Left
–45 –45
+45
Right 2496–2690
+45RCU
Layout of interface
Profile PF8
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 173/365
1710–2170 MHz Trisector AntennaX Polarization
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >27 dB (co-polar)
Connector 3 x 2 x 7/16 DIN female
Maximum input power 250 watts (at 50°C) per inputWeight 70.5 lb (32 kg)
Height 48.9 inches (1241 mm)
Radome diameter 9.1 inches (230 mm)
Wind load at 93 mph (150kph)Side 47 lbf (205 N)
Wind survival rating 120 mph (200 kph)
Natural frequency 45–47 Hz
Damping ratio 0.032
Shipping dimensions 54.9 x 12.4 x 13 inches(1395 x 315 x 330 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain (dBi) 15.4 15.2 15 14.8 15.5 15.4 15.3 14.9 15.7 15.6 15.4 14.9Tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°
+45° and -45° polarization 67° (half-power) 65° (half-power) 62° (half-power)horizontal beamwidth
+45° and -45° polarization 12.7° (half-power) 12° (half-power) 11.2° (half-power)vertical beamwidth
Electrical downtilt 0°–12° 0°–12° 0°–12°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°first sidelobe above horizon 16 16 15 15 dB 18 17 17 16 dB 18 18 16 16dB
Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)
Sector ±60° >10 dB (typical) >10 dB (typical) >10 dB (typical)Isolation intrasystem >30 dB >30 dB >30 dB
intersystem >40 dB >40 dB >40 dB
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Horizontal pattern
±45°- polarization
Vertical pattern±45°- polarization
0°–12° electrical downtilt
10945-C936.2830/a
65°
1710–2170 MH
X - POL
Adjustable Electrical D
0°–12°
Remote Control Op
800 10375
9.1 inches
(230 mm)
31.6 inches(803 mm)
17.2 inches(438 mm)
11 inches
(280 mm)
Service Area(cover removed)
Mounting Information
Description
Flange connection 12 x 12M at a graduated diameter of208 mm, 0°–360° continuously adjustable.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 174/36558
1710–2170 MHz Trisector AntennaX Polarization
General specifications:
Frequency range 1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3:< -150 dBc
Polarization +45° and -45°
Front-to-back ratio >30 dB (co-polar)(180° ± 30°) >25 dB (total power)
Connector 3 x 2 x 7-16 DIN female
Maximum input power 300 watts (at 50°C)per input
Weight 123.5 lb (56 kg)
Height 71.8 inches (1823 mm)
Radome diameter 9.1 inches (230 mm)
Wind load at 93 mph (150kph)Side 72 lbf (320 N)
Wind survival rating 120 mph (200 kph)
Natural frequency 19–21 Hz
Damping ratio 0.032
Shipping dimensions 79.9 x 15.7 x 15.7 inches(2030 x 400 x 400 mm)
Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Average gain (dBi) 17.2 17.5 17.2 17.6 17.8 17.6 17.8 17.9 17.4Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°
+45° and -45° polarization 66° (half-power) 63° (half-power) 60° (half-power)horizontal beamwidth
+45° and -45° polarization 7° (half-power) 6.7° (half-power) 6.4 ° (half-power)vertical beamwidth
Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)
Sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above horizon 17 15 15 dB 17 17 15 dB 17 17 15 dB
Cross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB (typical) >10 dB (typical) >10 dB (typical)
Isolation intrasystem >30 dB >30 dB >30 dBintersystem >45 dB >42 dB >42 dB
10895-C936.2761/a
800 10360
65°
1710–2170 MHz
X - POL
ustable Electrical Downtilt
0°–10°
Remote Control Option
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–1880 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1850–1990 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1920–2170 MHz
Horizontal pattern±45°- polarization
Vertical pattern±45°- polarization
0°–10° electrical downtilt
Service Area(cover removed)
9.1 inches(230 mm)
53.7 inches(1365 mm)
17.2 inches(438 mm)
11 inches(280 mm)
Mounting Information
Description
Flange connection 12 x 12M at a graduated diameter of 208 mm, 0°–360° continuously adjustable.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 175/365
Specifications:
Outer diameter 180 mm
Cable diameter (6x) 15–42 mm
Cable diameter (3x) 3.5–10.5 mm
Frame material Stainless steel
Sealing material Halogen-free cross linkable compound onethylene-propylene rubber (EPDM)
Fasteners Stainless steel
Accessories Mounting lubricant
Required assembly tools 6 mm socket wrenchWeight 4 lb (1.8 kg)
Shipping dimensions 8.2 x 8.2 x 2.7 inches(208 x 208 x 68 mm)
10826-C936.2670/a
110
51
255
25
30
38
9 1
Ø 1
7 0
Ø 1
8 0
Demanded dimensions of the installation interface: 183
172
1 2
+2+0
+1+0
Flexible Sealing Frame for Trisector Antenna 850 10010
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 176/36560
Flexible Sealing Frame for Trisector Antenna850 10010
Mounting instruction:
1) Tighten all screws alternating and evenly. A crosswise tightening of the outerscrews will cause a more homogeneous distribution of sealing pressure.After tightening, check extraction force of all cables.
Torque socket screw M8 1)
Max. 20 Nm (12x)
Insert the plugsat unused holes
Pole withinstallation interface
Gap 0.1 – max. 0.5 mmbetween cable and sealing
Feeder cable
.4.3.2.1
.8.7.6.5
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 177/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 178/365
A N T E N N A S
Important additions to Kathrein’s product line are these fixed tilt
antennas that provide operation in the 700 MHz wireless band.
All models will provide broadband coverage of the 800 MHz cellular
band; additional models will also offer broadband service for the
PCS/AWS band as well.
Rugged and reliable, these devices are being offered in a variety of
configurations that will permit integration of new services into legacy
sites with minimal impact. Both spatial and polarization diversity
schemes can be employed that will satisfy both existing CDMA or
GSM-based services, or soon to be deployed LTE systems that employ
2x or 4x diversity methods.
Kathrein offers models with fixed downtilts in two degree increments,
up to 14° in lowband and 8° highband in some models, and in
both vertically- and cross-polarized versions. Dual band models are
equipped with internal combiners to achieve feedline usage in both
high and low bands.
7 0 0 M H z F i x e d T i l t
700 MHz Fixed Tilt Panel Antennas
162
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 179/365
698–894 MHz Panel AntennaX Polarization
11167-FRO/d
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–14 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -23 dBenvelope at 100° azimuth -25 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
Weight 19.4 lb (8.8 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21600-00 Antenna with 0° electrical downtilt
840 21600-02 Antenna with 2° electrical downtilt
840 21600-04 Antenna with 4° electrical downtilt
840 21600-06 Antenna with 6° electrical downtilt
840 21600-08 Antenna with 8° electrical downtilt
840 21600-10 Antenna with 10° electrical downtilt
840 21600-12 Antenna with 12° electrical downtilt
840 21600-14 Antenna with 14° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
47°
698–894 MHz
4 ft X - POL
0° to 14° Electrical Do
2° increments
840 21600 ser
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 12.8 dBd 13.6 dBdtilt 8°–14° 12.3 dBd 13.1 dBd
Horizontal beamwidth 49° 45°@ 3 dB points
Vertical beamwidth 15.5° 14°@ 3 dB points
4.1 inches(103 mm)
39.4 inches
(1000 mm)
14.7 inches
(374 mm)
51.2 inches
(1301 mm)
3.9 inches(100 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 180/36564
698–894 MHz Panel AntennaX Polarization
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–14 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -20 dBenvelope at 100° azimuth -23 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
Weight 20.9 lb (9.5 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11138-B
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Order Information:
Model Description
840 21210-00 Antenna with 0° electrical downtilt
840 21210-02 Antenna with 2° electrical downtilt
840 21210-04 Antenna with 4° electrical downtilt
840 21210-06 Antenna with 6° electrical downtilt
840 21210-08 Antenna with 8° electrical downtilt
840 21210-10 Antenna with 10° electrical downtilt
840 21210-12 Antenna with 12° electrical downtilt
840 21210-14 Antenna with 14° electrical downtilt
60°
698–894 MHz
4 ft X - POL
to 14° Electrical Downtilt
2° increments
840 21210 series
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 12 dBd 12.8 dBdtilt 8°–14° 11.5 dBd 12.3 dBd
Horizontal beamwidth 63° 60°@ 3 dB points
Vertical beamwidth 15.5° 14°@ 3 dB points
4.1 inches(103 mm)
39.4 inches
(1000 mm)
14.7 inches
(374 mm)
51.2 inches
(1301 mm)
3.9 inches(100 mm)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 181/365
698–894 MHz Panel AntennaX Polarization
11139-FRO/g
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–14 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dBenvelope at 90° azimuth -14 dBenvelope at 100° azimuth -17 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 51.7 x 11.8 x 5.9 inches (1314 x 300 x 151 mm)
Weight 34 lb (15.4 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 130 lbf / 47 lbf / 138 lbf
(575 N) / (209 N) / (610 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21220-00 Antenna with 0° electrical downtilt
840 21220-02 Antenna with 2° electrical downtilt
840 21220-04 Antenna with 4° electrical downtilt
840 21220-06 Antenna with 6° electrical downtilt
840 21220-08 Antenna with 8° electrical downtilt
840 21220-10 Antenna with 10° electrical downtilt
840 21220-12 Antenna with 12° electrical downtilt
840 21220-14 Antenna with 14° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern
±45° - polarization
Horizontal pattern±45° - polarization
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 10.8 dBd 11.6 dBdtilt 8°–14° 10.3 dBd 11.1 dBd
Horizontal beamwidth 80° 75°@ 3 dB points
Vertical beamwidth 15.5° 14°@ 3 dB points
5.9 inches(151 mm)
55.8 inches(1418 mm)
54.3 inches
(1378 mm)
51.7 inches
(1314 mm)
11.8 inches
(300 mm)
80°
698–894 MHz
4 ft X - POL
0° to 14° Electrical Do
2° increments
840 21220 serMounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 182/36566
698–894 MHz Panel AntennaX Polarization
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–10 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -23 dBenvelope at 100° azimuth -25 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
Weight 29.3 lb (13.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 79 lbf / 350 lbf
(790 N) / (350 N) / (1038 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11168-FRO/e
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Order Information:
Model Description
840 21630-00 Antenna with 0° electrical downtilt
840 21630-02 Antenna with 2° electrical downtilt
840 21630-04 Antenna with 4° electrical downtilt
840 21630-06 Antenna with 6° electrical downtilt
840 21630-08 Antenna with 8° electrical downtilt
840 21630-10 Antenna with 10° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
0
10
20
30
40
50
60
70
80
90
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
47°
698–894 MHz
6 ft X - POL
to 10° Electrical Downtilt
2° increments
840 21630 series
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 14.6 dBd 15.4 dBdtilt 8°–10° 14.1 dBd 14.9 dBd
Horizontal beamwidth 49° 45°@ 3 dB points
Vertical beamwidth 10.7° 9.5°@ 3 dB points
4.1 inches(103 mm)
30.3 inches(770 mm)
14.7 inches
(374 mm)
78 inches(1980 mm)
3.9 inches(100 mm)
30.3 inches(770 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 183/365
698–894 MHz Panel AntennaX Polarization
11141-FRO/d
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–10 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -20 dBenvelope at 100° azimuth -23 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
Weight 29.8 lb (13.5 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 79 lbf / 350 lbf
(790 N) / (350 N) / (1038 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21240-00 Antenna with 0° electrical downtilt
840 21240-02 Antenna with 2° electrical downtilt
840 21240-04 Antenna with 4° electrical downtilt
840 21240-06 Antenna with 6° electrical downtilt
840 21240-08 Antenna with 8° electrical downtilt
840 21240-10 Antenna with 10° electrical downtilt
60°
698–894 MHz
6 ft X - POL
0° to 10° Electrical Do
2° increments
840 21240 ser
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 13.5 dBd 14.3 dBdtilt 8°–10° 13.5 dBd 13.8 dBd
Horizontal beamwidth 63° 60°@ 3 dB points
Vertical beamwidth 10.7° 9.5°
@ 3 dB points
4.1 inches(103 mm)
30.3 inches(770 mm)
14.7 inches
(374 mm)
78 inches(1980 mm)
3.9 inches(100 mm)
30.3 inches(770 mm)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 184/36568
698–894 MHz Panel AntennaX Polarization
11142-FRO/f
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–10 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dBenvelope at 90° azimuth -14 dBenvelope at 100° azimuth -17 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 73 x 11.8 x 5.9 inches (1854 x 300 x 151 mm)
Weight 44 lb (20 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 199 lbf / 71 lbf / 208 lbf
(883 N) / (315 N) / (923 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21250-00 Antenna with 0° electrical downtilt
840 21250-02 Antenna with 2° electrical downtilt
840 21250-04 Antenna with 4° electrical downtilt
840 21250-06 Antenna with 6° electrical downtilt
840 21250-08 Antenna with 8° electrical downtilt
840 21250-10 Antenna with 10° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
0
10
20
30
40
50
60
70
80
90
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 12.4 dBd 13.4 dBdtilt 8°–10° 11.9 dBd 12.9 dBd
Horizontal beamwidth 80° 75°@ 3 dB points
Vertical beamwidth 10.7° 9.5°@ 3 dB points
80°
698–894 MHz
6 ft X - POL
° to 10° Electrical Downtilt
2° increments
840 21250 series
5.9 inches(151 mm)
77.1 inches(1958 mm)
75.5 inches
(1918 mm)
73 inches
(1854 mm)
11.8 inches
(300 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 185/365
698–894 MHz Panel AntennaX Polarization
11169-FRO/e
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–8 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -23 dBenvelope at 100° azimuth -25 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)
Weight 38.1 lb (17.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21660-00 Antenna with 0° electrical downtilt
840 21660-02 Antenna with 2° electrical downtilt
840 21660-04 Antenna with 4° electrical downtilt
840 21660-06 Antenna with 6° electrical downtilt
840 21660-08 Antenna with 8° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
47°
698–894 MHz
8 ft X - POL
0° to 8° Electrical Do
2° increments
840 21660 ser
4.1 inches(103 mm)
40.1 inches(1018 mm)
14.7 inches
(374 mm)
103.8 inches(2637 mm)
3.9 inches(100 mm)
40.1 inches(1018 mm)
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 15.8 dBd 16.6 dBdtilt 8° 15.3 dBd 16.1 dBd
Horizontal beamwidth 49° 45°@ 3 dB points
Vertical beamwidth 7.8° 6.8°@ 3 dB points
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 186/36570
698–894 MHz Panel AntennaX Polarization
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR1 / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM1 (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 Degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–8 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -20 dBenvelope at 100° azimuth -23 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female (sealable long neck) (backmounted)
Dimensions L x W x D 103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)Weight 38.1 lb (17.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11144-B
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Order Information:
Model Description
840 21270-00 Antenna with 0° electrical downtilt
840 21270-02 Antenna with 2° electrical downtilt
840 21270-04 Antenna with 4° electrical downtilt
840 21270-06 Antenna with 6° electrical downtilt
840 21270-08 Antenna with 8° electrical downtilt
60°
698–894 MHz
8 ft X - POL
° to 8° Electrical Downtilt
2° increments
840 21270 series
Specifications: 698–806 MHz 806–894 MHz
Gain 15 dBd 15.8 dBd
Horizontal beamwidth 63° 60°@ 3 dB points
Vertical beamwidth 7.8° 6.8°@ 3 dB points
4.1 inches(103 mm)
40.1 inches(1018 mm)
14.7 inches
(374 mm)
103.8 inches(2637 mm)
3.9 inches(100 mm)
40.1 inches(1018 mm)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 187/365
698–894 MHz Panel AntennaX Polarization
11145-FRO/e
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)
(50 to 115 mm) OD mast.3-point tilt kit 13.3 lb (6 kg)
0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Specifications:
Frequency range 698–894 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C)Electrical downtilt range 0–8 degrees (2° increments)
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dBenvelope at 90° azimuth -14 dBenvelope at 100° azimuth -17 dB
Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB
Primary test frequencies 752 MHz, 782 MHz
Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 104.9 x 11.8 x 5.9 inches (2664 x 300 x 151 mm)
Weight 57 lb (25.9 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 289 lbf / 106 lbf / 303 lbf
(1285 N) / (470 N) / (1344 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Order Information:
Model Description
840 21280-00 Antenna with 0° electrical downtilt
840 21280-02 Antenna with 2° electrical downtilt
840 21280-04 Antenna with 4° electrical downtilt
840 21280-06 Antenna with 6° electrical downtilt
840 21280-08 Antenna with 8° electrical downtilt
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
Specifications: 698–806 MHz 806–894 MHz
Gain tilt 0°–6° 13.8 dBd 14.6 dBdtilt 8° 13.3 dBd 14.1 dBd
Horizontal beamwidth 80° 75°@ 3 dB points
Vertical beamwidth 7.8° 6.8°@ 3 dB points
5.9 inches(151 mm)
109 inches(2768 mm)
107.4 inches
(2728 mm)
104.9 inches
(2664 mm)
11.8 inches
(300 mm)
80°
698–894 MHz
8 ft X - POL
0° to 8° Electrical Do
2° increments
840 21280 serMounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 188/36572
698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization
47° // 40°
698–894 MHz1710–2170 MHz
4 ft XX - POL
0° to 14°, 0° to 8°
Electrical Downtilt2° increments
840 21800 series
11173-FRO/e
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB // >30 dB(worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -23 dB // -23 dBenvelope at 100° azimuth -25 dB // -25 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–14 degrees // 0–8 degrees(2° increments)
Lightning protection Chassis groundConnector 2 x 7-16 DIN female
(sealable long neck) (backmounted)
Dimensions L x W x D 51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
Weight 22.7 lb (10.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–8° 12.8 dBd 13.6 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8°–14° 12.3 dBd 13.1 dBd
Horizontal beamwidth 49° 45° 42° 40° 38°@ 3 dB points
Vertical beamwidth 15.5° 14° 8° 7.5° 7°@ 3 dB points
4.1 inches(103 mm)
39.4 inches
(1000 mm)
14.7 inches
(374 mm)
51.2 inches
(1301 mm)
3.9 inches(100 mm)
Order Information:
Model Description
840 21800-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
08°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
12°
14°
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 189/365
698–894 /1710–2170 MHz Panel AntennaXX Polarization with Integrated Combiner
60°
698–894 MHz1710–2170 MH
4 ft XX - POL
0° to 14°, 0° to 8
Electrical Downti2° increments
840 21410 se
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -20 dB // -20 dBenvelope at 100° azimuth -23 dB // -23 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–14 degrees // 0–8 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)
Weight 22.7 lb (10.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 117 lbf / 49 lbf / 142 lbf
(520 N) / (215 N) / (632 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11156-FRO/e
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–8° 12 dBd 12.8 dBd 15.2 dBd 15.5 dBd 15.8 dBdtilt 8°–14° 11.5 dBd 12.3 dBd
Horizontal beamwidth 63° 60° 63° 61° 59°@ 3 dB points
Vertical beamwidth 15.5° 14° 8° 7.5° 7°@ 3 dB points
4.1 inches(103 mm)
39.4 inches
(1000 mm)
14.7 inches
(374 mm)
51.2 inches
(1301 mm)
3.9 inches(100 mm)
Order Information:
Model Description
840 21410-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
08°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
12°
14°
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 190/36574
698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization
80°
698–894 MHz1710–2170 MHz
4 ft XX - POL
0° to 14°, 0° to 6°
Electrical Downtilt2° increments
840 21420 series
11157-FRO/g
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dB // -10 dBenvelope at 90° azimuth -14 dB // -14 dBenvelope at 100° azimuth -17 dB // -17 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–14 degrees // 0–8 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 51.7 x 11.8 x 5.9 inches (1314 x 300 x 151 mm)
Weight 34 lb (15.4 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 130 lbf / 47 lbf / 138 lbf
(575 N) / (209 N) / (610 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Mounting Equipment:
Description Weight
2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.
2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–8° 10.8 dBd 11.6 dBd 14.2 dBd 14.5 dBd 14.8 dBdtilt 8°–14° 10.3 dBd 11.1 dBd
Horizontal beamwidth 80° 75° 78° 82° 86°@ 3 dB points
Vertical beamwidth 15.5° 14° 8° 7.5° 7°@ 3 dB points
Order Information:
Model Description
840 21420-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
08°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
12°
14°
5.9 inches(151 mm)
55.8 inches(1418 mm)
54.3 inches
(1378 mm)
51.7 inches
(1314 mm)
11.8 inches
(300 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 191/365
698–894 /1710–2170 MHz Panel AntennaXX Polarization with Integrated Combiner
47° // 40°
698–894 MHz1710–2170 MH
6 ft XX - POL
0° to 10°, 0° to 6
Electrical Downti2° increments
840 21830 se
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB // >30 dB(worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -23 dB // -23 dBenvelope at 100° azimuth -25 dB // -25 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–10 degrees // 0–6 degrees(2° increments)
Lightning protection Chassis groundConnector 2 x 7-16 DIN female
(sealable long neck) (backmounted)
Dimensions L x W x D 78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
Weight 33.7 lb (15.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 79 lbf / 234 lbf
(790 N) / (350 N) / (1038 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11174-FRO/f
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–18210
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
0
10
20
30
40
50
60
70
80
90
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–6° 14.6 dBd 15.4 dBd 17.2 dBd 17.5 dBd 17.8 dBdtilt 8°–10° 14.1 dBd 14.9 dBd
Horizontal beamwidth 49° 45° 42° 40° 38°@ 3 dB points
Vertical beamwidth 10.7° 9.5° 5.5° 5.1° 4.7°@ 3 dB points
Order Information:
Model Description
840 21830-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
4.1 inches(103 mm)
30.3 inches(770 mm)
14.7 inches
(374 mm)
78 inches
(1980 mm)
3.9 inches(100 mm)
30.3 inches
(770 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 192/36576
698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization
60°
698–894 MHz1710–2170 MHz
6 ft XX - POL
0° to 10°, 0° to 8°
Electrical Downtilt2° increments
840 21440 series
11159-FRO/f
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.64 dB(< 1.4:1 / >15.56 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -20 dB // -20 dBenvelope at 100° azimuth -23 dB // -23 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–10 degrees // 0–6 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)
Weight 33.7 lb (15.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 178 lbf / 79 lbf / 234 lbf
(790 N) / (350 N) / (1038 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
0
10
20
30
40
50
60
70
80
90
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–6° 13.5 dBd 14.3 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8°–10° 13 dBd 13.8 dBd
Horizontal beamwidth 63° 60° 63° 61° 59°@ 3 dB points
Vertical beamwidth 10.7° 9.5° 5.5° 5.1° 4.7°@ 3 dB points
4.1 inches(103 mm)
30.3 inches(770 mm)
14.7 inches
(374 mm)
78 inches(1980 mm)
3.9 inches(100 mm)
30.3 inches(770 mm)
Order Information:
Model Description
840 21440-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 193/365
698–894 /1710–2170 MHz Panel AntennaXX Polarization with Integrated Combiner
80°
698–894 MHz1710–2170 MH
6 ft XX - POL
0° to 10°, 0° to 6
Electrical Downti2° increments
840 21450 se
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dB // -10 dBenvelope at 90° azimuth -14 dB // -14 dBenvelope at 100° azimuth -17 dB // -17 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–10 degrees // 0–6 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 73 x 11.8 x 5.9 inches (1854 x 300 x 151 mm)
Weight 44 lb (20 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 199 lbf / 71 lbf / 208 lbf
(883 N) / (315 N) / (923 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11160-FRO/g
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
0
10
20
30
40
50
60
70
80
90
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–6° 12.4 dBd 13.4 dBd 15.2 dBd 15.5 dBd 15.8 dBdtilt 8°–10° 11.9 dBd 12.9 dBd
Horizontal beamwidth 80° 75° 78° 82° 86°@ 3 dB points
Vertical beamwidth 10.7° 9.5° 5.5° 5.1° 4.7°@ 3 dB points
Order Information:
Model Description
840 21450-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
06°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10°
5.9 inches(151 mm)
77.1 inches(1958 mm)
75.5 inches
(1918 mm)
73 inches
(1854 mm)
11.8 inches
(300 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 194/36578
698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization
47° // 40°
698–894 MHz1710–2170 MHz
8 ft XX - POL
0° to 8°, 0° to 4°
Electrical Downtilt2° increments
840 21860 series
11175-FRO/e
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB // >30 dB(worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -23 dB // -23 dBenvelope at 100° azimuth -25 dB // -25 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–8 degrees // 0–4 degrees(2° increments)
Lightning protection Chassis groundConnector 2 x 7-16 DIN female
(sealable long neck) (backmounted)
Dimensions L x W x D 103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)
Weight 42.6 lb (19.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
4.1 inches(103 mm)
40.1 inches(1018 mm)
14.7 inches
(374 mm)
103.8 inches
(2637 mm)
3.9 inches(100 mm)
40.1 inches
(1018 mm)
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–4° 15.8 dBd 16.6 dBd 18.2 dBd 18.5 dBd 18.8 dBdtilt 8° 15.3 dBd 16.1 dBd
Horizontal beamwidth 49° 45° 42° 40° 38°@ 3 dB points
Vertical beamwidth 7.8° 6.8° 4° 3.7° 3.4°@ 3 dB points
Order Information:
Model Description
840 21860-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 195/365
698–894 /1710–2170 MHz Panel AntennaXX Polarization with Integrated Combiner
60°
698–894 MHz1710–2170 MH
8 ft XX - POL
0° to 8°, 0° to 4°
Electrical Downti2° increments
840 21470 se
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR1 / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM1 (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >30 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -20 dB // -20 dBenvelope at 100° azimuth -23 dB // -23 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–8 degrees // 0–4 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)
Weight 42.5 lb (19.3 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 237 lbf / 105 lbf / 291 lbf
(1053 N) / (467 N) / (1294 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
11162-FRO/f
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
Order Information:
Model Description
840 21470-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–4° 15 dBd 15.8 dBd 17.2 dBd 17.5 dBd 17.8 dBdtilt 8° 14.5 dBd 15.3 dBd
Horizontal beamwidth 63° 60° 63° 61° 59°@ 3 dB points
Vertical beamwidth 7.8° 6.8° 4° 3.7° 3.4°@ 3 dB points
4.1 inches(103 mm)
40.1 inches(1018 mm)
14.7 inches
(374 mm)
103.8 inches
(2637 mm)
3.9 inches(100 mm)
40.1 inches
(1018 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 196/36580
698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization
80°
698–894 MHz1710–2170 MHz
8 ft XX - POL
0° to 8°, 0° to 4°
Electrical Downtilt2° increments
840 21480 series
11163-FRO/f
Specifications:
Frequency range 698–894 MHz // 1710–2170 MHz
Impedance 50 ohms
VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)
PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc
Polarized +45° and -45°
Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)
Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector
Isolation >30 dB
Normalized radiation patternenvelope at 80° azimuth -10 dB // -10 dBenvelope at 90° azimuth -14 dB // -14 dBenvelope at 100° azimuth -17 dB // -17 dB
Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB
Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz
Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz
Electrical downtilt range 0–8 degrees // 0–4 degrees(2° increments)
Lightning protection Chassis ground
Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)
Dimensions L x W x D 104.9 x 11.8 x 5.9 inches (2664 x 300 x 151 mm)
Weight 57 lb (25.9 kg)
Wind load at 93 mph (150kph)Front/Side/Rear 289 lbf / 106 lbf / 303 lbf
(1285 N) / (470 N) / (1344 N)
Radome UV-resistant fiberglass
Wind survival 150 mph (240 kph)
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
1710–2170 MHz
Vertical pattern±45° - polarization
Horizontal pattern±45° - polarization
698–894 MHz
Mounting Equipment:
Description Weight
3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)(50 to 115 mm) OD mast.
3-point tilt kit 13.3 lb (6 kg)0–7 degrees downtilt angle.
See illustrations and instructions on pages 181–182
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
10
20
30
40
50
60
70
80
90
0
3 0
6 0
90
1 2 0
1 5 0 180 2
1 0
2 4 0
270
3 0 0
3 3 0
3020163 61020
3
6
10
20
BdBd
dB
%
Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170
Gain tilt 0°–6° // 0°–4° 13.8 dBd 14.6 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8° 13.3 dBd 14.1 dBd
Horizontal beamwidth 80° 75° 78° 82° 86°@ 3 dB points
Vertical beamwidth 7.8° 6.8° 4° 3.7° 3.4°@ 3 dB points
Order Information:
Model Description
840 21480-xx-yy Dualband antenna with electrical downtilt
HighbandTilt (-yy)
00°
02°
04°
LowbandTilt (-xx)
00°
02°
04°
06°
08°
5.9 inches(151 mm)
109 inches(2768 mm)
107.4 inches
(2728 mm)
104.9 inches
(2664 mm)
11.8 inches
(300 mm)
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 197/365
3-point Mounting Hardwarefor 6 ft and 8 ft Antennas
2-point Mounting Hardwarefor 4 ft Antennas
Mounting Bracketsfor use with 2-point mount 21000 series antennas
Mast dia. 2–4.5 inches (50–115 mm)
Weight: 4 lb (1.8 kg)
Mounting Bracketsfor use with 3-point mount 21000 series antennas
Mast dia. 2–4.5 inches (50–115 mm)
Weight: 6 lb (2.7 kg)
Mechanical Tilt Bracketsfor use with 2-point mount 21000 series antennas
Weight: 7.4 lb (3.7 kg)
64 mmM8
Mechanical Tilt Bracketsfor use with 3-point mount 21000 series antennas
Weight: 13.3 lb (6 kg)
64 mmM8
21000 series Mounting Hardwa
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 198/36582
21000 seriesMounting Information
Note: Antenna must be
mounted with the
drain holes at thebottom.
47° and 60° Panel Antennas 80° Panel Antennas
Dout
Dout Dout
742 033* 742 034*Mast dia. 4.5" (114.3 mm) 5.5" (139.7 mm)
22.5 inches 23.25 inches(572 mm) (591 mm)
2-Point3-Sector Mounting
Drain Location
* 3-sector mounting systems are 2-point mounting arrangements. For antennas with 3 mounting points, consultation with structuraldesigners/engineers is strongly recommended in accordance with local regulations. See page 358 for sector mount kit specifications
Dout Dout
742 033* 742 034*Mast dia. 4.5" (114.3 mm) 5.5" (139.7 mm)
25.5 inches 26.5 inches(648 mm) (673.1 mm)
2-Point3-Sector Mounting
Dout
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 199/365
Remote Electrical Downtilt
Model Description Page
860 10147 Remote control unit 192
860 10148 Remote control unit 192
860 10006 Central control unit 193
860 10026 Central control unit 193
860 10046 Portable control adapter 195
860 10002 RET remote control signal splitter 196
860 10030 Lightning protection device 197
782 10253 Smart bias tee 198
782 10254 Smart bias tee 198
782 10255 Smart bias tee 198
782 10256 Smart bias tee 198
782 10453 Smart bias tee 198
782 10454 Smart bias tee 198
782 10455 Smart bias tee 198
782 10456 Smart bias tee 198
782 11055 Smart bias tee 201
782 11056 Smart bias tee 201
782 10577 Bias Tee 203
782 10578 Bias Tee 203
782 10429 Bias Tee 205
793 304 Bias tee 206
793 301 DC stop 207
782 10850 DC stop 208
840 104nn Series Remote Control Cables -Black (150 m and 200 m) 209
GC-1 Grounding clamp 211
850 10005 Kathrein installation tool 212
183
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 200/365
C O M P O N E N T S
R e m o t e E l e c t r i c a l T i l t
In contrast to legacy wireless systems, using fixed cell sizes, advancednetworks will be dynamically re-configurable to accommodate the
demands of subscriber loading, time of day, seasonal adjustments
and system expansion. In any newly designed or upgraded wireless
system, coverage adjustments may be made by varying vertical
beam tilt to lengthen or shorten sector range. Kathrein’s advanced
antennas have continuously adjustable downtilt by optional tilt control
units under local or remote control. Tilt in each band covered by the
antenna is independently adjustable.
Site optimization can be accomplished when construction is complete
and adjusted easily and quickly in the future as operating conditions
evolve. Adjustment is possible by on-site personnel, with no need for
tower climbing. Via Ethernet link, control from the network control
center may be accomplished, by network operators or dynamically
by the network control system. Coverage adjustments may be
made anytime, without the need to power down a site. This may
be especially valuable where site access may be difficult, such as
installations on high voltage transmission towers.
Kathrein offers a complete solution for Remote Electrical Downtilt, with
all the components to accomplish this vital improvement to capacity
and reliability: antennas, motor controls, control cable splitters, control
units, and accessories. In addition, some Kathrein antennas haveintegrated remote control actuators.
Kathrein’s Remote Electrical Tilt (RET) system advantages:
✦ Limited site access and/or time restrictions become irrelevant
✦ No special platforms or other means of access to the antenna
are required
✦ Adjustments can be made and the appropriate measurements
performed quickly and economically
✦ Network alterations can be carried out despite adverse
weather conditions
✦ Cells remain fully operational while changes are being made
✦ Permits site optimization at stealth or difficult-to-access sites
184
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 201/365
Kathrein is a member of the Antenna Interface
Standards Group that has the objective of
introducing open control standards for base station
antennas with remotely adjustable tilt.
RET Components:
RCU (Remote Control Unit)
✦ CCU (Central Control Unit)
✦ DC Power and Signal Splitter
✦ Control Cable
✦ Lightning Protection Device
✦ Grounding Kit
Optional:
✦ Dual Band Combiners – See “TMA’s, Filters,
Electrical Accessories” section for more detail
✦ Smart Bias Tee
✦ DTMA (Double Tower Mounted Amplif ier)
See “TMA’s, Filters, Electrical Accessories”
section for more detail
Remote Control Un
Portable Control Unit
Signal Splitter
Lightning Protection
Device
Central Control Unit
Remote ControlCables
Smart Bias Tee
Grounding Kit
Remote Electric Tilt
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 202/36586
Typical RET Site Configurations
Three options are offered for communication between the CCU and RCU’s:
✦ Individual control cables (with splitters and/or daisy chain feature on RCU’s)
✦ Using Smart Bias Tee’s to multiplex control signals onto the feeder lines
✦ Using a combination of Bias Tee and TMA’s
Remote Electric Tilt
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 203/365
RET System Control:
Central Control Unit (CCU)
The major component for controlling the
RCU’s is the Central Control Unit (CCU),
installed at the BTS.
The CCU can be accessed from the network
control center via the Ethernet input and/or directly through a personal computer
via the RS 232 input or Ethernet input. No special software is required for standard
operation. AC/DC and DC-only models are available.
The CCU appears as an addressable IP device to the controlling computer or network
and is accessed via standard Web browser (e.g. Internet Explorer). IP addresses are user
programmable; access is password protected.
The display which appears contains all the required control functions for normal
service and installation. In addition to permitting the configuration and control of
the connected RCU’s and TMA’s, the CCU program also displays the device status,
command history list and various types of system errors. All AISG alarms can be read
via the alarm interface.
The software and firmware associated with both the CCU’s and RCU’s are continually
evolving and may be updated easily using the update pages available in the browser
application. Upgrade software may be obtained on request; registered users of
Kathrein-Scala’s on-line data library may download updates from the library.
The CCU also provides 8 user-programmable open-collector alarm outputs for interface
with the BTS.
For more detail, please see the RET Software Manual, or the RET Hardware Manual,
available on request.
Portable Control Adapter (PCA)
The PCA is a portable controller for Kathrein’s Remote Electrical Tilt system (RET). It is
a simple device for operating remote control unit’s (RCU’s) attached to Kathrein base
station antennas. This product is designed for use by installers or maintenance staff
with temporary site access. A standard Central Control Unit (CCU) is not required.
Control from the network operations center is not available using the PCA.
The PCA consists of a small control box and Windows- based software installed on a
laptop. The control box transforms the USB inter-face into an AISG-compatible interface
(RS 485 + DC voltage). Together with the supplied Windows-based software, all
functions of the RCU can be controlled via a laptop or PC.
Up to 27 RCU’s can be controlled using a single PCA. A site may be upgraded for
remote control via the network control center by replacing the PCA with a standard
CCU.
Remote Electric Tilt
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 204/36588 10922-D
850 10005
Installation Tool
Use of improper tools
may damage the
interfaces. Kathreinstrongly recommends
using the 850-10005Installation Tool with a
standard torque wrench
to tighten the nuts of thefeeder line connectors.
Sealing of cap nutson correctly installed
connectors for additional
weather protection isnot required. It is not
recommended by theconnector manufacturers.
Note
Remote Electric Tilt
Feeder Line Installation for Panel Antennas with
Four Connectors on Two Levels
eeder Line Installation
Kathrein’s 850 10005 installation tool is suitable for either 27mm or 32 mm 7-16 DIN connectors.
Tighten the nut within a torque range of 18.5–24.4 lb-ftdepending on the connector manufacturer’s specifications.
Two tools are included (27 mm and 32 mm).
Fits a standard inch drive torque wrench.
1/2" square drive
Step 2
Step 1
There are four interfaces forfeeding the antenna located atthe bottom.
To make the installation of thefeeder lines and the connectorseasier, the interfaces arearranged on two levels.
The feeder line installationsequence is: 1, 2, 3, 4.
Put the connector carefully inplace and hand-screw the nut on.
Use a torque wrench to finish theinstallation (see the 850-10005Installation Tool).
After the feeder lines have beeninstalled the remote control units(RCU) can be installed.
See the instructions "Attachingthe RCU" for details.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 205/365
Kathrein’s 850 10005 installation tool is suitable for either 27mm or 32 mm 7-16 DIN connectors.
Tighten the nut within a torque range of 18.5–24.4 lb-ftdepending on the connector manufacturer’s specifications.
Two tools are included (27 mm and 32 mm).
Fits a standard inch drive torque wrench.
1/2" square drive
Use of improper toolsmay damage the
interfaces. Kathrein
strongly recommendsusing the 850 10005
Installation Tool with astandard torque wrench
to tighten the nuts of the
feeder line connectors.
Connector Arrangement
There are six RF connections and three RETinterfaces located at the bottom of the antenna.
Do not remove the RCUconnection covers until the
feeder line installation iscomplete.
The downtilt must be set
to 0° before the RCU isinstalled (see the instructions
“Attaching the RCU” for
details).
Not following these
instructions may damage the
downtilt spindle.
Step 2
After the feeder lines have beeninstalled the remote control units
(RCU) can be installed.The RCU installation sequenceis: 1, 2, 3.
See the instructions "Attachingthe RCU" for details.
Sealing of cap nutson correctly installed
connectors for additional
weather protection isnot required. It is not
recommended by theconnector manufacturers.
Note
Remote Electric Tilt
850 10005Installation Too
Feeder Line Installation forTriple-band Antennas
Feeder Line Installation
Step 1
The feeder line installationsequence is: 4, 5, 6, 7, 8, 9.
Put the connector carefully inplace and hand-screw the nut on.
Use a torque wrench to finish theinstallation (see the 850-10005Installation Tool).
Repeat the operations shown in
figures A and B for each feederline.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 206/36590
➋
➌
➊
➎
➍
Threaded attachment fittingfor the downtilt adjustmentcap and the RCU.
Locking ring.
Downtilt adjustment spindlewith integrated downtiltdegree scale.
Antenna tilt control housing.
Gear wheel for the RCU.
➋
➌
➊
➎
➍
To set the downtilt angleexactly you must lookhorizontally at the scale.The lower edge of the gearwheel must be used foralignment purposes.
Step 2
Clean the thread surface.
Apply the mounting-paste evenlyonto the full circumference of thethread as illustrated in the figure.
Step 3Push the attachment nut of theRCU down towards the RCUhousing.
Place the RCU carefully overthe adjustment spindle➌. Besure the flat side of the spindleis aligned with the flat side of theantenna tilt control housing➍.
Carefully push the RCU onto theantenna until it is firmly seated.
Step 4
Hand tighten the RCUattachment nut (41 mm).
Torque setting: 11–13 ft-lbf
Connect the RCU controlcable immediately afterattachment of the RCU. Thetorque setting for the controlcable connector must be 0.4–0.7 ft-lbf (‘hand-tightened’).
Step 1
Remove the protective downtiltadjustment cap completely fromthe antenna.
Remove the black locking ring ➋
by pulling it downward.
Check the phase shifter for properfunction by turning the gear wheel
➎. The phase shifter will gosmoothly between minimum andmaximum tilt when functioningproperly.
Reset the downtilt to 0 degrees.
Avoid ingestion of mounting-paste
or contact with eyes. In case ofcontact with eyes rinse thoroughlywith plenty of water and seek medical advice. Avoid long-termcontact with skin. In case ofcontact with skin wash off withsoap and water.
For further information please read the‘Safety data-sheet (91/155 EEC), Anti-Seize‘High-Tech’ Assembly Paste differentpacking sizes’ by company WEICONGmbH & Co. KG, Königsberger Str. 225,D-48157 Münster,http://www.weicon.de
The RCU must be kept
in vertical alignment
with the antenna duringinstallation or the
downtilt adjustmentspindle➌ may be
damaged.
In cases where amechanical downtilt is
installed do not set the
mechanical tilt more than14 degrees or the unit
may be damaged.
Remote Electric TiltAttaching the RCU
➋
➎
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 207/365
Remote Electric Tilt Control Cable Installation
Lightning Protection Device Remote ControlSignal Spitter
Step 1
Connect a control cable to thedaisy chain input ➊ on the RCU.
If the daisy chain output is notused, do not remove the daisy
chain output protection plug.
➋➊Daisy chain in Daisy chain out
Bottom of RCU
Step 2
To use the daisy chain option.
Remove the daisy chain outputprotection plug.
Connect a control cable to thedaisy chain output➋ on theRCU.
Connect the other end of thecontrol cable to the daisy chaininput➊ on the next RCU.
Do not remove the daisy chaintermination plug from the lastRCU device.
Dress cables using blackUV-resistant cable ties ➍.
When installing or
removing cables, turnONLY the threaded collar
indicated, not the body of
the connector. Rotatingthe connector body can
result in permanentdamage to the connector
and the device beinginstalled. Note that the
connectors have keywayswhich must be carefully
aligned before insertion.
Insert the connector fullyuntil well seated before
tightening.
Turn this collar
Turn thiscollar
➍
Hand tighten connectors(4 to 6 in-lb).
Avoid tightening
connectors with
wrenches or pliers.
Over tighteningconnectors may
permanently damage the
RCU.
Termination Plug
Keyway
Key
Smart Bias Tee
Dual Tower Mount Amplifier
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 208/36592
Remote Electric Tilt
Remote Control Unit
860 10147, 860 10148
11324-A936.4061/a
Kathrein’s 860 10147 and 860 10148 Remote Control Units (RCU) allow operators to control theelectrical tilt of compatible antennas without direct access to the antenna.
• Allow control of the antenna either locally through a laptop computer, on site desktop computer,the optional central control unit; remotely via an ethernet network or over the internet.
• May be retrofitted to compatible antennas without dismantling or removing the antenna.
• Suitable for daisy chain and splitter solutions.
• Suitable for outdoor use.
Specifications:
Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant
Logical interface ex factory1) AISG 1.1 860 101473GPP/AISG 2.0 860 10148
Input voltage range 10–30 V (pin 1 and pin 6)
Power Consumption <1 W (standby); <8.5 W (motor activated)
Connectors 2) 2 x 8 pin connector according to IEC 60130-9conforming with AISGDaisy chain in: male; Daisy chain out: female
Hardware interfaces RS485A/B (pin 5, pin 3 )power supply (pin 1, pin 6); DC return (pin 7)conforming with AISG / 3GPP
Adjustment time (full range) 40 seconds (typical, depending on antennatype)
Adjustment cycles >50,000
Temperature range -40°C to +60°C
Protection class IP 24
Lightning protection AISG interface (each pin)2.5 kA (10/350 μs) 8 kA (8/20 μs)
Housing material Profile: Aluminum, coatedCover: Aluminum
Weight 1.16 lb (525 g)
Dimensions 7 x 2.4 x 2 inches (178 x 60 x 50 mm)
Shipping dimensions 9.6 x 4 x 3.7 inches (245 x 102 x 93 mm)
Standards EN 60950-1 (Safety)EN 55022 (Emission)EN 55024 (Immunity)ETS 300019-1-4 (Environmental)UL 60950-1; 1st edition
Certifications CE, FCC 15.107 Class B
Order Information:
Model Description
860 10147 Remote control unit (AISG 1.1 start-up)
860 10148 Remote control unit (3GPP/AISG 2.0 start-up)
2 inches(50 mm)
2.4 inches(60 mm)
7 inches(178 mm)
1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/ AISG 2.0 and vice versa with a vendor specific command. Start-up operationof the RCU 860 10147 is only possible in a RET system supporting AISG 1.1and start-up operation of the RCU 860 10148 is only possible in a RET systemsupporting 3GPP/AISG 2.0.
The protocol can also be changed as follows: AISG 1.1 to 3 GPP:Enter “3GPP”into the additional data filed “Installer’s ID” and perform a layer 7 reset or a powerreset. 3GPP to AISG 1.1:Enter “AISG1” into the additional data field “Installer’sID” and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the “Installer’s ID” field.
Please note: If the Primary of the RETsystem does not support the standard ofthe ‘logical interface ex factory’, the RCU must be switched to the appropriatestandard of the Primary before installation. Please contact Kathrein for furtherinformation.
2) The tightening torque for attaching the connector must be 0.4–0.7 ft-lbf (handtightened).
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10147, 860 10148
Tested To Comply
With FCC Standards
Daisy chain in(male)
Daisy chain(female
Bottom of RCU
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 209/365
Specifications:
Connectors 3 x 8 pin connectoraccording to IEC 60130-9, female,conforms to AISG
tightening torque for 0.5–1 Nm (0.36–0.73 lb/ft)attaching connectors hand tighten only
Power supply from BTS860 10006 DC: -48 V /max. 1.7 A
AC: 100 V–240 V / 50–60 Hzmax. 1.6 A
860 10026 DC: -48 V /max. 1.7 A
Power supply to RCU 3 x +29 V / max. 1.7 A (in total)3 x +13 V / max. 3.8 A (in total)
Total output power 50 W max.
Interface to RCU and TMA RS 485 / power supply
Protocol to RCU and TMA HDLC hex-coded command setconforms to AISG
Interface to BTS Ethernet (10 base T) and RS 232
Protocols to BTS TCP/IP, PPP, HTTP/HTML, UDP,DHCP, FTP, SNMP, ICMP/PING
Alarm interface to BTS 8 x open collector outputuser programmable
Max number of RCU's 27 (depending on cable configuration*)see charts on reverse for details
Max number of DTMA's 6 (depending on cable configuration*)Temperature range -25°C – +55°C
Dimensions 19 inches x 1 HU (height unit)19 x 9.8 x 1.7 inches(483 x 250 x 43.6 mm)
Shipping dimensions 23.5 x 14.4 x 5.8 inches(597 x 367 x 148 mm)
Standards EN 60950-1 (Safety)EN 55022 (Emission)EN 55024 (Immunity)UL 60950-1, 1st edition
Certifications CEFCC 15.107 Class BUL
* For specific configuration requirements call Kathrein Scala DivisionCommunication Sales Engineering.
Order Information:
Model Description
860 10006 Central control unit, AC/DC power supply
860 10026 Central control unit, DC power supply
Both units include the Central Control Unit, Manual, DC Cable,ethernet crossover cable. The 860-10006 also includes U.S. andEuropean syle AC Power Cords.
10729-J936.2310/f
Remote Electric Tilt
Central Control
860 10006, 860 100
Optional Accessories:
Description
Null modem RS-232 cable for connection to a local laptop computer
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 860 10006, 860 10026
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 210/36594
Remote Electric Tilt860 10006, 860 10026
Star Configuration
N_RCU/sector L1max in m1 220
2 1903 170
4 150
5 1306 110
7 100
8 909 90
Daisy-chain Configuration
N_RCU Lmax in m
1 280
2 2703 260
4 2505 240
6 230
7 220
8 2109 20010 190
11 18012 170
13 170
14 16015 150
16 14017 140
18 130
19 13020 120
21 12022 110
23 110
24 11025 100
26 10027 100
The maximum control cable length (Lmax)
depends on the type of RET configuration.
In star configuration with one control cable
for each sector, the max. length of the con-
trol cable depends on the number of RCUsper sector (N_RCU/sector). In daisy-chain
configuration, the max. length depends onthe total number of RCUs (n_RCU).
The length values are listed in the tables
below.
9 inches(228.8 mm)
19 inches(483 mm)
1.7 inches(43.6 mm)
9.8 inches(250 mm)
17 inches(432.4 mm)
Star Configuration Daisy-chain Configuration
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 211/365
Remote Electric Tilt
Portable Control Ad
860 100
Standards EN 60950-1EN 55022EN 55024
Certifications CEFCC part 15 Class BUL (for external power adapter)
10854-F936.2733/d
* Hand tighten only! Torque setting: 0.37–0.73 lb ft (0.5–1.0 Nm).
** If powered via AISG-interface no external power supply is needed.
*** Switchable with software.
Specifications:Connector* to RCU/TMA 1 x 8 pin connector according to IEC 60130-9,
female, conforms to AISG RF-connector (SMB male)
External power supply**Input 90–264 VAC, 47–63 HzOutput 24 VDC /3.0 A
Input voltage of PCA 24 VDC
Output voltage to AISG female pin 6 (24 VDC): 24 VDC ±10%RCU's/TMA's AISG female pin 1 (12 VDC): 14 VDC ±7%
RF male (at 24 VDC): 24 VDC ±10%***RF male (at 12 VDC): 14 VDC ±7%***
Output power AISG female pin 6 (24 VDC)(to RCU's/TMA's) without load on pin 1 (12 VDC) and on RF-plug: <60W
AISG female pin 1 (12 VDC)with max. 30W load on pin 6 (24 VDC) and/or on RF-plug: <30W
Current monitoring 10–2500 mA per branch (12V, 24V. RF)
measurement levelOver-current protection <2500 mA per branch (12V, 24V. RF)
Interface to RCU/TMA RS485 / power supply / RF connector (SMB male)
Protocol to RCU HDLC hex-coded command setconforms to AISG 1.1 and 3GPP / AISG 2.0
Interface to PC USB 1.1/2.0
System requirements Windows 2000, Windows XP (32 bit version)
Max. number 27 pcs (depending on system configurationof RCU's/TMA's and length of control cable)
Max. length of control cable 656 ft (200 m) / 9 RCUs (daisy chain configuration)492 ft (150 m) / 6 RCUs (splitter configuration)
Temperature range 0°C to +55°C
Weight 1.2 lb (0.535 kg) (including external power adapter)
Dimensions 6.3 x 3.7 x 1.6 inches (160 x 95 x 40 mm)
Kathrein’s 860 10046 Portable Control Adapter (PCA) allows operators to
interface with Kathrein remote control units.
• CE, FCC, and UL certification
• Meets EN 60950-1, EN 55022, and EN 55024 standards
• Includes: PCA, External power supply (24 VDC / 70 W), USB cable,
AC power cable, CD-ROM (with PCA software, drivers, and manual),installation guide, and carrying case
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference
received, including interference that may causeundesired operation.
KATHREIN 860 10046
Tested To Comply
With FCC Standards
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 212/36596
Remote Electric Tilt860 10002
Remote ControlSignal Splitter
Mounting Options:
Model Description
Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.
Wall mounting using customer supplied screws.
* Connectors must be located at the bottom.No inverted mounting.
Supplied Mounting Clamp131 1847
10730-F936.2226/g
Specifications:
Connectors 4 x 8 pin connectoraccording IEC 60130-9, 1 male, 3 female
tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only
Rated current 3 A (at 50°C)
Maximum voltage 60 V
Protection class IP 65
Weight 0.55 lb (250 g)
Dimensions 4.1 x 3.6 x 2.8 inches(103 x 91 x 72 mm)
Shipping weight 1.1 lb (500 g)
Shipping dimensions 4.6 x 4.6 x 4.5 inches(117 x 117 x 114 mm)
Mounting * Mounting for 2 to 5.7 inch (50 to 145 mm)OD masts is supplied.Wall mounting using customer suppliedscrews.
* Connectors must be located at the bottom. No inverted mounting.
Up to three RCU’s may be powered and controlled via onecontrol cable using the 860 10002.
Input
(male)
Output 1
(female)
Output 2
(female)
Output 3
(female)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 213/365
All specifi-
Remote Electric Tilt
Lightning ProtecDevice
860 10030
Mounting Options:
Model Description
Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.
Wall mounting using customer supplied M4 screws.
* Connectors must be located at the bottom.
No inverted mounting.
Supplied Mounting Clamp131 1847
The Lightning Protection Device (LPD) is designed for lightningprotection of control cables carrying partial lightning currents up
to 25 kA (shield) and 2.5 kA (inner conductor), according to IEC
61643-1, IEC 61312-3. Each pin is protected individually.
For outdoor and indoor use.
Specifications:
Connectors 2 x 8 pin connectoraccording to IEC 60130-9,input: male, output: female
tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only
SPD-Type 8 x bipolar gas tube
Max impulse current 25 kA (housing, shield)*, (10/350 μs)inner conductors: 2.5 kA/pin (10/350 μs)
Max dynamic overvoltage < 700 Vat spark gap (1 kV/ μs)
Static Overvoltage < 100 V(100 V/s)
Grounding Via mounting plate / clamps at metallicsurfaces or separate cable,min. cross-section 5 mm2 Cu (screw M6)
Max operation current 4 A (at 50°C)
Max operation voltage 60 VWeight 0.55 lb (250 g)
Dimensions 4.1 x 3.6 x x 2.8 inches(103 x 91 x 72 mm)
Shipping weight 1.1 lb (500 g)
Shipping dimensions 4.6 x 4.6 x 4.5 inches(117 x 117 x 114 mm)
Mounting* Mounting for 2 to 5.7 inch (50 to 145 mm)OD masts is supplied.Wall mounting using customer supplied M4screws.
* Connectors must be located at the bottom. No inverted mounting.
No decoupling elements are integrated. The coordination with
additional LPD's (device input) should be checked according toIEC 61312.
Grounding of the device via the mounting plate at metallic surfaces
or via additional grounding cable (not included).
Important: A control cable with a minimum length of 2 meters is
required between the Lightning Protection Device and the CentralControl Unit at the BTS to achieve the required decoupling.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 214/36598
General Specifications:
Frequency range 800–2170 MHz
Impedance 50 ohms
VSWR < 1.1:1 (800–2170 MHz)
Insertion lossPort 1↔Port 2 < 0.1 dB (800–2170 MHz)
Isolationfor DC and RCU signalsPort 1↔Port 2 >70 dBPort 1↔Port DC/RCU >70 dB
Port 2↔
Port DC/RCU 0 dBIntermodulation (2x20w) IM3: <-160 dBc
Power consumption Typically 0.6 watt
Lightning protection 3 kA, 10/350 μs pulse
Operating temperature -40° to +60° C
Modem carrier frequency 2.176 MHz
IP rating IP 66 (indoors or outdoors)
Certification FCC 15.107 Class B ComputingDevices
Dimensions 5.5 x 3.1 x 1.7 inches(140.7 x 79 x 43.5 mm)
Weight 3.3 lb (1.5 kg)
Shipping dimensions 6.6 x 4 x 3.4 inches(167 x 102 x 86 mm)
The Smart Bias Tee combines the performance of a
standard Bias Tee (e.g. type 793 304) with the function of
an additional modem (AISG standard) in order to provideDC voltage as well as remote control signals via an RF
feeder cable to a TMA or RCU.
The Smart Bias Tee provides low RF signal insertion loss
from port 1 to port 2 and vice versa. The measures taken
to protect against static discharge and lightning ensure ahigh level of reliability and operational safety.
• 782 10253, 782 10453: 12 V version for use near theBTS, in order to feed-in DC voltage and RCU control
signals into a feeder cable
• 782 10254, 782 10454: 12 V version for use near the
antenna, in order to control an RCU (only required if noTMA is in use)
• 782 10255, 782 10455: 24 V version for use near the
BTS, in order to feed-in DC voltage and RCU controlsignals into a feeder cable
• 782 10256, 782 10456: 24 V version for use near theantenna, in order to control an RCU (only required if no
TMA is in use)
Specifications:
Connectors 782 10253 782 10254 782 10255 782 1025612V/BTS 12V/Antenna 24V/BTS 24V/Antenna
Port 1: 7-16 DIN male BTS Antenna BTS AntennaPort 2: 7-16 DIN female Feeder Feeder Feeder Feeder
Connectors 782 10453 782 10454 782 10455 782 1045612V/BTS 12V/Antenna 24V/BTS 24V/Antenna
Port 1: 7-16 DIN female BTS Antenna BTS AntennaPort 2: 7-16 DIN male Feeder Feeder Feeder Feeder
Maximum input powerPort 1 or Port 2 ≤ 750 watts (800–2170 MHz)
Port DC/RCU <2.5 A / +8 – +14 VDC <2.5 A / +8 – +14 VDC <2.5 A / +8 – +30 VDC <2.5 A / +8 – +30 VDC
10802-O936.2484/m
Abbreviations:
RCU = Remote Control Unit for
remote electrical control of
antenna tilt
BTS = Base TransceiverStation
TMA = Tower Mounted
Amplifier
AISG = Antenna Interface
Standards Group
Port 1 = Port for BTS or forAntenna
Port 2 = Port for Feeder Cable
Port DC/RCU = Port for DC
voltage and remote controlunit signals
Remote Electric Tilt782 10253, 782 10254, 782 10255, 782 10256
782 10453, 782 10454, 782 10455, 782 10456
Smart Bias Tee
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 215/365
Remote Electric Tilt 782 10253, 782 10254, 782 10255, 782 102
782 10453, 782 10454, 782 10455, 782 104
Antenna system Antenna system(1 sector) (1 sector)
without TMA with Kathrein TMA
782 10254 (12V)or
782 10256 (24V)
Warning:
Don’t mix12 V and 24V
Bias Tees in any configu-
ration. Always choose
corresponding voltage to
suit the TMA.
Port 1(Antenna)
Port 2(Feeder)
Port 1(BTS)
Port 2(Feeder)
Port DC/RCU(RCU)
Block diagrams Application Examples
Port DC/RCU
(CCU)
782 10253 (12V)or
782 10255 (24V)
DC cable DC cable
Warning:
Don’ tm ix 12V and 24V
Bias Tees in any configu-
ration. Always choose
corresponding voltage to
suit the TMA.
Antenna s ystem Antenna s ystem(1 sector) (1 sector)
without TMA with Kathrein TMA
Port 1
(Antenna)
Port 2
(Feeder)
Port 2
(Feeder)
Port 1(BTS)
Port DC/RCU
(RCU)
Port DC/RCU(CCU)
782 10454 (12V)or
782 10456 (24V)
782 10453 (12V)or
782 10455 (24V)
DC cable
DC cable
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 216/36500
Remote Electric Tilt782 10253, 782 10254, 782 10255, 782 10256
782 10453, 782 10454, 782 10455, 782 10456
Order Information:
Model Description
782 10253 Smart Bias Tee 12V/BTS
782 10254 Smart Bias Tee 12V/Antenna
782 10255 Smart Bias Tee 24V/BTS
782 10256 Smart Bias Tee 24V/Antenna
782 10453 Smart Bias Tee 12V/BTS
782 10454 Smart Bias Tee 12V/Antenna
782 10455 Smart Bias Tee 24V/BTS
782 10456 Smart Bias Tee 24V/Antenna
Please note:
The Smart Bias Tees are designed to operate under the
environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as
recommendedin ETS 300 019-2-4.
The installation team must be properly qualified and alsobe familiar with the relevant national safety regulations.
The coupling torque at 7-16 connectors is 18.5–22 ft-lbf!
Hold the smart bias tee housing securely while tighteningthe 7-16 locking nut. The tightning torque for fixing the
3.1 inches(79 mm)
5.3 inches(140.7 mm)
1.7 inches(43.5 mm)
782 10253, 782 10255782 10453, 782 10455
782 10254, 782 10256782 10454, 782 10456
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause
undesired operation.
KATHREIN 782 10253, 782 10254
782 10255, 782 10256782 10453, 782 10454
782 10455, 782 10456
Tested To Comply
With FCC Standards
Pin connections
782 10253 782 10254 782 10255 782 10256
782 10453 782 10454 782 10455 782 10456
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 217/365
782 11055, 782 110
Smart Bias TeeThe Smart Bias Tee combines the performance of a standard Bias Tee
(e.g. type 793 304) with the function of an additional modem (AISGstandard) in order to provide either DC voltage as well as remote
control signals via an RF feeder cable to a TMA or RCU.
The Smart Bias Teeprovides low RF signal insertion loss from port
1 to port 2 and vice versa. The measures taken to protect againststatic discharge and lightning ensure a high level of reliability and
operational safety.
• 782 11055: +8–+30 V DC version (DC on pin 6) for use near the
BTS, in order to feed-in DC voltage and RCU controlsignals into a feeder cable
• 782 11056: +8–+30 V DC version (DC on pin 6) for use near the
antenna, in order to control an RCU (only required if noTMA is in use)
General Specifications:
Frequency range 690–2700 MHz
Impedance 50 ohms
VSWR < 1.1:1 (690–2700 MHz)
Insertion lossPort 1↔Port 2 < 0.1 dB (690–2700 MHz)
Isolationfor DC and RCU signalsPort 1↔Port 2 >70 dBPort 1↔Port DC/RCU >70 dBPort 2↔Port DC/RCU >0 dB
Intermodulation (2x20w) IM3: <-160 dBc
Input powerPort 1 or Port 2 < 750 watts (690–2700 MHz)Port DC/RCU < 2.5 A / +8–+30 VDC
Power consumption Typically 0.6 watt
Lightning protection 3 kA, 10/350 μs pulse
Operating temperature -40° to +60° C
Modem carrier frequency 2.176 MHz
IP rating IP 66 (indoors or outdoors)
Certification FCC 15.107 Class B Computing Devices
Dimensions 3.2 x 3.2 x 1.8 inches (without connectors)(81 x 81 x 46 mm)
Weight 1.8 lb (0.8 kg)
Shipping dimensions 6.6 x 4 x 3.4 inches(167 x 102 x 86 mm)
See reverse for order information.
Specifications:
Connectors 782 11055 782 1105624V / BTS 24V / Antenna
Port 1: 7-16 DIN male BTS AntennaPort 2: 7-16 DIN female Feeder Feeder
11254-A936.3819a
Abbreviations:
RCU = Remote Control Unit for
remote electrical control ofantenna tilt
BTS = Base Transceiver
Station
TMA = Tower MountedAmplifier
AISG = Antenna InterfaceStandards Group
Port 1 = Port for BTS or for
Antenna
Port 2 = Port for Feeder Cable
Port DC/RCU = Port for DCvoltage and remote controlunit signals
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.
KATHREIN 782 11055, 782 11056
Tested To Comply
With FCC Standards
Pin Connections
Remote Electric Tilt NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 218/36502
Remote Electric Tilt782 11055, 782 11056
Antenna system Antenna system(1 sector) (1 sector)
without TMA with Kathrein TMA
782 11056
Application Examples
782 11055
DC cable DC cable
Port 1(Antenna)
Port 2(Feeder)
Port 1(BTS)
Port 2(Feeder)
Port DC/RCU(RCU)
Block Diagrams
Port DC/RCU(CCU)
782 11056
782 11055
5.3 inches(140.7 mm)
3.1 inches
(79 mm)
3.1 inches
(79 mm)
5.3 inches(140.7 mm)
1.8 inches(46 mm)
1.8 inches(46 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 219/365
11376-A936.3769
936.3771
Remote Electric Tilt
Bias Tee
782 10577, 782 105
782 10577: The Bias Tee is suitable to feed DC voltage into the feeder
cable of a receiving and/or transmitting antenna system in order toprovide the operating voltage for a mast head amplifier.
• The Bias Tee provides low RF signal insertion loss from the BTS tothe antenna port and vice versa.
• The DC voltage is fed from the DC port to the antenna port while
providing a high level of DC isolation from the DC to the BTS portand from the antenna to the BTS port.
• The measures taken to protect against static discharge and lightning
ensure a high level of reliability and operational safety.
782 10578: The Bias Tee is suitable to feed DC voltage and AISG control
signals into the feeder cable in order to provide operating voltageand control signals via theRF feeder cable to the TMA or RCU.
• The Bias Tee provides low RF signal insertion loss from the BTS to
the antenna port and vice versa.
• The DC voltage and AISG control signal (2.176 MHz) is fed from
the DC port to the antenna port while providing a high level of DCisolation from the DC to the BTS port and from the antenna to the
BTS port.
• The measures taken in conjunction with the CCU-LOC to protect
against static discharge and lightning ensure a high level ofreliability and operational safety.
Specifications:
Frequency range 690–2700 MHz
Impedance 50 ohms
VSWR < 1.1:1 (690–2700 MHz)
Insertion lossPort 1↔Port 2 < 0.1 dB (690–2700 MHz)
IsolationPort 1↔Port 2 >70 dBPort 1↔DC >70 dB
Maximum input powerPort 1 < 250 watts (690–2700 MHz)DC <1 A / 0 to +30 VDC
Intermodulation (2x20w) IM3: <-160 dBc
Lightning protection 3 kA, 10/350 μs pulse
Operating temperature -40° to +70° C
ConnectorsPort 1 (BTS) 7-16 DIN malePort 2 (Antenna) 7-16 DIN femalePort DC SMA female
IP rating IP 66 (indoors or outdoors)
Dimensions 3.4 x 1.8 x 1.8 inches(85.4 x 46.2 x 45 mm)
Weight 1 lb (0.47 kg)
Shipping dimensions 5 x 3.5 x 3 inches(128 x 88 x 75 mm)
See reverse for order information.
782 10578782 10577
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 220/36504
Remote Electric Tilt
Bias Tee
782 10577, 782 10578
Application ExampleApplication Example
782 10577 782 10578
Order Information:
Model Description
782 10577 Bias Tee
782 10578 Bias Tee (AISG)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 221/365
The Bias Tee is suitable to feed DC voltage and AISG controlsignals into thefeeder cable in order to provide operating
voltage and control signals via theRF feeder cable to theTMA or RCU.
• The Bias Tee provides low RF signal insertion loss from
the BTS to the antenna port and vice versa.
• The DC voltage and AISG control signal (2.176 MHz) is
fed from the DC port to the antenna port while providing ahigh level of DC isolation from the DC tothe BTS port and
from the antenna to the BTS port.
• The measures taken in conjunction with the CCU-LOCto protect against staticdischarge and lightning ensure a
high level of reliability and operational safety.
Specifications:
Frequency range 800–2170 MHz
Impedance 50 ohms
VSWR < 1.1:1 (800–2170 MHz)
Insertion lossBTS↔Antenna < 0.1 dB (800–2170 MHz)
IsolationBTS↔Antenna >70 dB (DC)BTS↔DC/AISG >70 dB (DC)
Input powerBTS <250 watts (800–2170 MHz)DC/AISG <1.8 A / 13 VDC
<0.8 A / 29 VDC
Intermodulation (2x20w) IM3: <-160 dBc
Lightning protection 3 kA, 10/350 μs pulse
Operating temperature -40° to +70° C
ConnectorsPort 1 BTS 7/16 DIN malePort 2 Antenna 7/16 DIN femalePort DC/AISG SMB male
Application IndoorDimensions 3.5 x 1.9 x 1.3 inches
(88 x 47 x 35.4 mm)
Weight 1.3 lb (0.6 kg)
Shipping dimensions 5.7 x 5.7 x 2 inches(145 x 145 x 50 mm)
10995-B936.2831/a
Remote Electric Tilt
Bias Tee
782 10429
Application Example
Antenna BTS
DC
793 304BiasTee
800–2170 MHzBias Tee
800–2170 MHz
Antenna BTS
DC/AISG
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 222/36506
The Bias Tee is used to feed DC voltage into the feedercable of a receiving and/or transmitting antenna system
to provide the operating voltage for a tower mountedamplifier.
Design and construction:
● The Bias Tee provides low RF signal insertion loss from
the BTS to the antenna port and vice versa.
● The DC voltage is fed from the DC port to the antennaport while providing a high level of DC isolation from theDC to the BTS port and from the antenna to the BTS
port.
● The measures taken to protect against static discharge
and lightning ensure a high level of reliability andoperational safety.
● For indoor use.
Specifications:
Frequency range 800–2170 MHz
Impedance 50 ohms
VSWR < 1.1:1 (800–2170 MHz)
Insertion lossBTS↔Antenna < 0.1 dB (800–2170 MHz)
IsolationBTS↔Antenna >70 dB (DC)BTS↔DC >70 dB (DC)
Maximum input powerBTS <250 watts (800–2170 MHz)DC <1000 mA / 0–+30 VDC
Intermodulation (2x20w) IM3: <-160 dBc
Lightning protection 5 kA, 8/20 μs pulse
Operating temperature -40° to +70° C
ConnectorsBTS 7-16 DIN maleAntenna 7-16 DIN femaleDC SMB male
Dimensions 3.5 x 1.9 x 1.3 inches
(88 x 47 x 35.4 mm)Weight 1.3 lb (0.6 kg)
Shipping dimensions 5.7 x 5.7 x 2 inches(145 x 145 x 50 mm)
10727-C936.1953/b
Remote Electric Tilt
Bias Tee
793 304
Application Example
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 223/365
The DC Stop is used in dual or multi-band antenna systems
where one or more antenna systems require a DC supply foran installed mast head amplifier. The DC Stop prevents DC
voltage from being shorted within the nonbiased antenna
system(s) and isolates the corresponding base stationoutput(s) from DC voltage.
Design and construction:The DC Stop provides low RF signal insertion loss and high
DC signal isolation from port 1 to port 2 and vice versa.
For indoor or outdoor use (IP 67).
10703-E936.1954/d
Specifications:
Frequency range 800–2170 MHz
Impedance 50 ohms
VSWR < 1.1:1 (800–2000 MHz)< 1.2:1 (2000–2170 MHz)
Insertion loss Port 1↔Port 2 < 0.1 dB (800–2170 MHz)
Isolation Port 1↔Port 2 >70 dB (DC)
Maximum input power <750 watts (800–2170 MHz)
Intermodulation (2x20w) IM3: -160 dBcOperating temperature -40° to +70° C
ConnectorsPort 1 7-16 DIN malePort 2 7-16 DIN female
Dimensions 2.8 x 1.6 x 1.3 inches(70 x 40 x 32 mm)
Weight 0.7 lb (0.32 kg)
Remote Electric Tilt 793 301
DC Stop
Application Example
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 224/36508
The DC Stop is used in dual or multi-band antenna systems
where one or more antenna systems require a DC supply foran installed mast head amplifier. The DC Stop prevents DC
voltage from being shorted within the nonbiased antenna
system(s) and isolates the corresponding base stationoutput(s) from DC voltage.
• Low RF signal insertion loss
• High DC signal isolation from port 1 to port 2 and viceversa
• Suitable for indoor or outdoor applications
For indoor or outdoor use (IP 67).
11375-A936.3521
Specifications:
Frequency range 250–2700 MHz
Impedance 50 ohms
VSWR < 1.1:1 (280–2700 MHz)< 1.2:1 (250–380 MHz)
Insertion loss Port 1↔Port 2 < 0.1 dB (250–2700 MHz)
Isolation Port 1↔Port 2 >70 dB (DC)
Maximum input power <750 watts (250–2700 MHz)
Intermodulation (2x20w) IM3: <-160 dBc
Operating temperature -40° to +70° C
ConnectorsPort 1 7-16 DIN malePort 2 7-16 DIN female
Dimensions 2.8 x 1.6 x 1.3 inches(70 x 40 x 32 mm)
Weight 0.7 lb (0.32 kg)
Remote Electric Tilt782 10850
DC Stop
782105557821085078210850
0580128705801287
2 x 78210660 (single unit)or
2 x 78210661 (double unit)
2 x 78210660 (single unit)
or2 x 78210661 (double unit)
Application Example
70.4
M 2 9 x 1 . 5
32
3 9 . 5
78210850DC - Stop
250–2700MHz
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 225/365
Note: See chart on the following page showing maximum totalcontrol cable lengths allowed for various numbers of RCUs
Specifications:
Connectors 2 x 8 pinIEC 60130-9, female/male
Tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only
Construction Shielded1 x twisted pair 100 Ω /1 MHz2 x power supply, 1 x groundAWM style 20317 I/II A/B + 20549 + 20233
Rated current 4 A (power supply) (at 50°C)
Temperature range -40° to +80° C (fixed position)
Protection class IP 67 (connected)
Cable diameter 0.3 inch (8 mm)
Flammability VL 1581 VW-1CSA FT-1
Minimum bending radiusone time 2.4 inches (60 mm)several times 4.8 inches (120 mm)
The male and female connectors of all Kathrein RET products are compat-ible componets designed to operate under the environmental conditions asdescribed in ETS 300 019-1-4 class 4.1 E.
Order Information:
Model Length
840 10407 3.3 ft (1 m)
840 10408 6.6 ft (2 m)
840 10409 16.4 ft (5 m)
840 10410 32.8 ft (10 m)
840 10432 65.6 ft (20 m)
840 10411 82.7 ft (25 m)
840 10412 131.2 ft (40 m)
840 10433 164 ft (50 m)
840 10413 196.9 ft (60 m)
840 10414 262.5 ft (80 m)
840 10415 328.1 ft (100 m)
840 10453 344.5 ft (105 m)
840 10454 360.9 ft (110 m)
840 10455 377.3 ft (115 m)
840 10451 492.1 ft (150 m)
840 10452 656.2 ft (200 m)
The Kathrein remote control cables are made with connectors to matchthe Kathrein Remote Control Unit (RCU), Signal Splitter, and Central
Control Unit (CCU).
10728-I
Remote Electric Tilt 840 104nn Ser
Remote Control C
PIN assigment per AISG:
1 +13 V DC (+12 V DC nominal)
2 not used
3 RS485 B
4 not used
5 RS485 A
6 +29 V DC (+24 V DC nominal)
7 DC Return
8 not used
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 226/36510
840 104nn Series Remote Electric Tilt
emote Control Cable
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 227/365
Remote Electric Tilt
● Designed for lightning protection of control cables used with theKathrein RCU (Remote Control Unit)
● Includes grounding cable with attached lug, one roll of butyl rubbertape, one roll of PVC tape, and hardware.
Specifications:
Maximum lightning current >20 kA (pulse 10/350 μsec)
Protection class IP 68
Grounding Via stranded grounding wire6 gauge, length 24 inches,2-hole lug terminal (3 / 8 in. lug) attached
Nominal size 1 / 4 or 3 / 8 inch
Bonding conductor jacket PEmaterial type
Grounding strap material Copper
Waterproofing method Butyl rubber and PVC tape
Note The grounding kit is only suitable for use with Kathrein power supply andsignal cables:
860 10007 to 860 10015860 10029860 10032
860 10033860 10054 to 860 10060
10925-B
GC-1
Grounding Clam
2.2–2.3 inches
0.245–0.38 inches
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 228/36512
Remote Electric Tilt
threin Installation Tool
850 10005
Kathrein's 850 10005 installation tool is suitable for either 27
mm or 32 mm 7-16 DIN connectors.
Tighten the nut within a torque range of 18.5–24.4 lb-ft(25–33 Nm) depending on the connector manufacturer's
specifications.
Two tools are included (27mm and 32 mm).
Fits standard inch drive torque wrench.
10878-A936.2435/b
1/2” square actuationaccording to DIN 3120Form C
27 or 32 mm
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 229/365
Other Directional Antennas
MaximumFrequency Gain Model Polarization Input Power Connector Page
790–960 MHz 5 dBi 738 445 V 200 watts 7-16 DIN 215
1710–1880 MHz 5.5 dBi
1880–2170 MHz 6.5 dBi
790–960 MHz 5 dBi 738 446 V 200 watts N female 215
1710–1880 MHz 5.5 dBi
1880–2690 MHz 6.5 dBi
Frequency Gain Model Polarization Connector Length Page
790–1000 MHz 11 dBi 742 192V01 V 7-16 DIN 30.9 inches 216
1000–1700 MHz 11.3 dBi
1700–2170 MHz 11.5 d’Bi
806–960 MHz 10 dBi CL-900B H or V N female 29 inches 223
Log Periodic
Frequency Gain Model Polarization Connector Length Page
806–869 MHz 12 dBi TY-840 H or V N female 24.5 inches 217
824–894 MHz 12 dBi TY-860 H or V N female 24.25 inches 217
890–960 MHz 12 dBi TY-900 H or V N female 23 inches 217
806–869 MHz 12 dBi RY-840B H or V N female 29 inches 218
824–894 MHz 12 dBi RY-860B H or V N female 29 inches 218
890–960 MHz 12 dBi RY-900B H or V N female 29 inches 218
Yagi
Bi-Directional Multiband
Frequency Gain Model Polarization Connector Width Page
890–960 MHz 16 dBi MF-900B V N female 46.5 inches 221
928–953 MHz 16 dBi MF-940B V N female 46.5 inches 221
940–960 MHz 16 dBi MF-950B V N female 46.5 inches 221
806–869 MHz 18 dBi PR-850 H or V N female 68 inches 219
890–960 MHz 18 dBi PR-900 H or V N female 68 inches 219
940–960 MHz 18 dBi PR-950 H or V N female 68 inches 219
Half-Parabolic
213
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 230/365
A N T E N N A S
Kathrein offers the system designer a choice of many
directional antenna types for f ixed station applications:
Yagis, both open and radome protected, will provide long
term reliability and economy for control station, point to point
and point to multipoint applications.
Log periodic antennas offer broadband performance in
rugged, weather resistant fiberglass radomes.
Kathrein-Scala’s Paraflector® and Miniflector® Series
half-parabolic antennas offer higher gain and greater front-to-
back performance than Yagis; they excel in applications where
longevity and performance are demanded.
Kathrein’s logs, Yagis and the Miniflector and Paraflector series
offer flexibility in system design, usable for horizontal or vertical
polarization.
Our Bi-directional antennas are the perfect complement forfill-in applications for dual band carriers. Covering both the
806-960 and 1710 -2180 MHz bands, they are an excellent
choice for enclosed spaces such as arenas and stadiums, as
well as for temporary installations.
O T H E R
214
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 231/365
Bi-Directional Multiband AntennaV Polarization
10700-E936.1870/e
H-plane 790-960 MHz
Horizontal pattern – V-polarization
E-plane 790-960 MHzVertical pattern – V-polarization
H-plane 1710-2170 MHzHorizontal pattern – V-polarization
E-plane 1710-2170 MHzVertical pattern – V-polarization
738 445, 738 4
Order Information
Model Description
738 445 Antenna with 7-16 DIN connector
738 446 Antenna with N connector
Specifications:
Frequency range 790–960 MHz1710–2170 MHz
Gain 790–960 MHz 5 dBi1710–1880 MHz 5.5 dBi1880–2170 MHz 6.5 dBi
Impedance 50 ohms
VSWR 790–806 MHz < 2.2:1806–824 MHz < 1.7:1824–960 MHz < 1.5:1
1710–2170 MHz < 1.5:1Polarization Vertical
Maximum input power 200 watts (at 50°C)
Connector N or 7-16 DIN female
Weight 1.8 lb (.8 kg)
Dimensions 15.7 x 7.4 x 2.2 inches(400 x 188 x 55 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 6 lbf / 15 lbf / 8 lbf
(25 N) / (65 N) / (35 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 16.6 x 8.3 x 3.7 inches(422 x 212 x 95 mm)
Shipping weight 2.6 lb (1.2 kg)
790–960 MHz1710–2170 MH
5 dBi gain 806–960 M
5.5 dBi gain 1710–1880
6.5 dBd gain 1880–2170
V-POL
14.6 inches(371 mm)
2.2 inches(55 mm)
15.7 inches(400 mm)
7.4 inches(188 mm)
Mounting Equipment:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(optional) (50 to 145 mm) OD mast.
Wall mounting using customer supplied hardware.
Reference the Mechanical Accessories section.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 232/36516
790–2690 MHz Wideband Log–Periodic AntennaV Polarization
790–2690 MHz
11 dBi gain 790–1000 MHz
1.3 dBi gain 1000–1700 MHz
.5 dBd gain 1700–2690 MHz
V-POL
11286-A936.3956/b
Mounting30.9 inches
(785 mm)
11.8 inches
(300 mm)
6.1 inches(155 mm)
Specifications:
Frequency range 790–2690 MHz
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization Vertical
Connector 7-16 DIN female
Weight 12.1 lb (5.5 kg)
Dimensions 30.9 x11.8 x 6.1 inches(785 x 300 x 155 mm)
Wind load at 93 mph (150kph)Front/Side/Rear 5 lbf / 59 lbf / 7 lbf
(20 N) / (260 N) / (30 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 39.37 x 14.2 x 6.9 inches(1000 x 360 x 175 mm)
Shipping weight 13.7 lb (6.2 kg)
Mounting Hardware included for masts of1.25 to 2.75 inch (30 to 70 mm) OD.
742 192V01
Specifications: 790–960 MHz 960–1710 MHz 1710–2200 MHz 2200–2490 MHz 2490–2690 MHz
Gain 10.8 dBi 11 dBi 11.2 dBi 11 dBi 10.8 dBi
Horizontal beamwidth 65° (halfpower) 60° (halfpower) 55° (halfpower) 50° (halfpower) 50° (halfpower)
Vertical beamwidth 53° (halfpower) 50° (halfpower) 47° (halfpower) 45° (halfpower) 45° (halfpower)
Front-to-back ratio >25 dB >25 dB >25 dB >22 dB >25 dB
Input power maximum 300 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 170 watts (at 50°C) 150 watts (at 50°C)total 500 watts
E-Plane
Vertical patternVertical - polarization
H-PlaneHorizontal pattern
Vertical - polarization
790–1000 MHz
E-Plane
Vertical patternVertical - polarization
H-PlaneHorizontal pattern
Vertical - polarization
1700–2690 MHz
E-Plane
Vertical patternVertical - polarization
H-PlaneHorizontal pattern
Vertical - polarization
1000–1700 MHz0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 233/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 234/36518
Mounting Equipment:
Model Description
MKPS-1 Mounting Kit for 2.375 inch(optional) (60 mm) OD mast.
MKPS-2 Mounting Kit for 2.875 inch(optional) (73 mm) OD mast.
MKPS-3 Mounting Kit for 3.5 inch(optional) (89 mm) OD mast.
MKPS-4 Mounting Kit for 4 inch(optional) (102 mm) OD mast.
MKPS-5 Mounting Kit for 4.5 inch(optional) (114 mm) OD mast.
Mounting Hardware Kit Required.
806 to 960 MHz Radome Protected Yagi AntennaH or V Polarization
RY-840B, RY-860B, RY-900B
806–869 MHz824–894 MHz890–960 MHz
12 dBi gain
H-POL
orV-POL
(Shown vertically polarized)
12 inches(305 mm)
17 inches
(432 mm)
29 inches
(737 mm)
Specifications: RY-840B RY-860B RY-900B
Frequency range 806–869 MHz 824–894 MHz 890–960 MHz
Gain 12 dBi 12 dBi 12 dBi
Impedance 50 ohms 50 ohms 50 ohms
VSWR < 1.5:1 maximum < 1.5:1 maximum < 1.5:1 maximum(1.35:1 typical) (1.35:1 typical) (1.35:1 typical)
Polarization Horizontal or vertical Horizontal or vertical Horizontal or vertical
Front-to-back ratio >18 dB >18 dB >20 dB
Maximum input power 100 watts (at 50°C) 100 watts (at 50°C) 100 watts (at 50°C)
H-plane beamwidth 58 degrees (half-power) 58 degrees (half-power) 48 degrees (half-power)E-plane beamwidth 48 degrees (half-power) 44 degrees (half-power) 40 degrees (half-power)
Connector N female N female N female
Weight 16.0 lb (7.3 kg) 16.0 lb (7.3 kg) 16.0 lb (7.3 kg)
Dimensions 29 x 17 x 12 inches 29 x 17 x 12 inches 29 x 17 x 12 inches(737 x 432 x 305 mm) (737 x 432 x 305 mm) (737 x 432 x 305 mm)
Wind load at 93 mph (150kph)Side/Top/Rear 63 lbf / 16 lbf / 37 lbf 63 lbf / 16 lbf / 37 lbf 63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N) (279 N) / (69 N) / (164 N) (279 N) / (69 N) / (164 N)
Wind survival rating 120 mph (200 kph) 120 mph (200 kph) 120 mph (200 kph)
Shipping dimensions 31 x 20 x 14.5 inches 31 x 20 x 14.5 inches 31 x 20 x 14.5 inches(787 x 508 x 368 mm) (787 x 508 x 368 mm) (787 x 508 x 368 mm)
Shipping weight 28.0 lb (12.7 kg) 28.0 lb (12.7 kg) 28.0 lb (12.7 kg)
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
RY-840B RY-900BRY-860B
Order Information:
Model Description
RY-840B Yagi antenna 806–869 MHz
RY-860B Yagi antenna 824–894 MHz
RY-900B Yagi antenna 890–960 MHzTop
Side
10057-H10058-H
10064-H
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 235/365
806–896 MHz890–960 MHz940–960 MHz
18 dBi gain
H-POLor
V-POL
PARAFLECTO
806 to 960 MHz High-Gain Half-Parabolic AntennaH or V Polarization
PR-850, PR-900, PR-
PARAFLECTOR is a registered trademark of Kathrein Inc., Scala Division.
PR-850 consists of:
1 x PRF-850 Feed assembly1 x PRSA Screen assembly
Specifications: PR-850 PR-900 PR-950
Frequency range 806–896 MHz 890–960 MHz 940–960 MHz
Gain 18 dBi 18 dBi 18 dBi
Impedance 50 ohms 50 ohms 50 ohms
VSWR < 1.5:1 < 1.5:1 < 1.2:1
Polarization Horizontal or vertical Horizontal or vertical Horizontal or vertical
Front-to-back ratio >25 dB >23 dB >25 dB
Maximum input power 100 watts (at 50°C) 100 watts (at 50°C) 100 watts (at 50°C)
H-plane beamwidth 12 degrees (half-power) 12 degrees (half-power) 12 degrees (half-power)
E-plane beamwidth 24 degrees (half-power) 24 degrees (half-power) 24 degrees (half-power)
Connector N female N female N female
Weight 38 lb (17.2 kg) 38 lb (17.2 kg) 38 lb (17.2 kg)
Dimensions 68 x 36 x 18 inches 68 x 36 x 18 inches 68 x 36 x 18 inches(1727 x 914 x 457 mm) (1727 x 914 x 457 mm) (1727 x 914 x 457 mm)
Wind load at 93 mph (150kph)Front/Side 134 lbf / 72 lbf 134 lbf / 72 lbf 134 lbf / 72 lbf
(594 N) / (320 N) (594 N) / (320 N) (594 N) / (320 N)
Wind survival rating 100 mph (160 kph) 100 mph (160 kph) 100 mph (160 kph)
Shipping dimensions 40 x 36 x 7 inches 40 x 36 x 7 inches 40 x 36 x 7 inches(1016 x 914 x 178 mm) (1016 x 914 x 178 mm) (1016 x 914 x 178 mm)
Shipping weight 47 lb (21.3 kg) 47 lb (21.3 kg) 47 lb (21.3 kg)
See the next page for order information.
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
PR-850 PR-950PR-900
PR-900 consists of:
1 x PRF-900 Feed assembly1 x PRSA Screen assembly
PR-950 consists of:
1 x PRF-950 Feed assembly1 x PRSA Screen assembly
10054-I10055-H
10056-I
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 236/36520
806 to 960 MHz High-Gain Half-Parabolic AntennaH or V Polarization
PR-850, PR-900, PR-950
Mounting Equipment:Model Description
2 x MKPX-2 Mounting Kit for 2.375 inch(optional) (60 mm) OD mast.
MKPX-9 Mounting Kit for 2.875 inch(optional) (73 mm) OD mast.
MKPX-10 Mounting Kit for 3.5 inch(optional) (89 mm) OD mast.
MKPX-11 Mounting Kit for 4 inch(optional) (102 mm) OD mast.
MKPX-12 Mounting Kit for 4.5 inch(optional) (114 mm) OD mast.
MKTB-1 Tilt Mount Kit, 8-39 degrees tilt angle.(optional) Used with any MKPX kit listed above.
Mounting Hardware Kit Required.
18 inches
(457 mm)
68 inches(1727 mm)
(Shown vertically polarized)
36 inches
(914 mm)
Order Information:
Model Description
PR-850 Half-parabolic antenna 806–896 MHz
PR-900 Half-parabolic antenna 890–960 MHz
PR-950 Half-parabolic antenna 940–960 MHz
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 237/365
890–960 MHz928–953 MHz940–960 MHz
16 dBi gain
V-POL
MINIFLECTO
890 to 960 MHz Medium-Gain Half-Parabolic AntennaV Polarization
MF-900B, MF-940B, MF-9
MINIFLECTOR is a registered trademark of Kathrein Inc., Scala Division.
MF-900B consists of:1 x MFF-900B Feed assembly1 x MFSA Screen assembly
Specifications: MF-900B MF-940B MF-950B
Frequency range 890–960 MHz 928–953 MHz 940–960 MHz
Gain 16 dBi 16 dBi 16 dBi
Impedance 50 ohms 50 ohms 50 ohms
VSWR < 1.5:1 < 1.4:1 < 1.3:1
Polarization Vertical Vertical Vertical
Front-to-back ratio >23 dB >23 dB >23 dB
Maximum input power 100 watts (at 50°C) 100 watts (at 50°C) 100 watts (at 50°C)
H-plane beamwidth 16 degrees (half-power) 16 degrees (half-power) 16 degrees (half-power)
E-plane beamwidth 30 degrees (half-power) 34 degrees (half-power) 34 degrees (half-power)
Connector N female N female N female
Weight 13 lb (5.9 kg) 13 lb (5.9 kg) 13 lb (5.9 kg)
Dimensions 46.5 x 18 x 16 inches 46.5 x 18 x 16 inches 46.5 x 18 x 16 inches(1181 x 457 x 406 mm) (1181 x 457 x 406 mm) (1181 x 457 x 406 mm)
Wind load at 93 mph (150kph)Front/Side 50 lbf / 28 lbf 50 lbf / 28 lbf 50 lbf / 28 lbf
(222 N) / (121 N) (222 N) / (121 N) (222 N) / (121 N)
Wind survival rating 120 mph (200 kph) 120 mph (200 kph) 120 mph (200 kph)
Shipping dimensions 47 x 18.5 x 16.5 inches 47 x 18.5 x 16.5 inches 47 x 18.5 x 16.5 inches(1194 x 470 x 419 mm) (1194 x 470 x 419 mm) (1194 x 470 x 419 mm)
Shipping weight 20 lb (9.1 kg) 20 lb (9.1 kg) 20 lb (9.1 kg)
See the next page for order information.
MF-900B MF-950BMF-940B
MF-940B consists of:1 x MFF-940B Feed assembly1 x MFSA Screen assembly
MF-950B consists of:1 x MFF-950B Feed assembly1 x MFSA Screen assembly
10043-I10044-H
10045-J
H-planeHorizontal pattern – V-polarization
E-planeVertical pattern – V-polarization
H-planeHorizontal pattern – V-polarization
E-planeVertical pattern – V-polarization
H-planeHorizontal pattern – V-polarization
E-planeVertical pattern – V-polarization
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 238/36522
MF-900B, MF-940B, MF-950B
Note: Contact Kathrein Scala Division Sales Engineeringfor instructions regarding installation with horizontalpolarization using optional special hardware.
Mounting Equipment:
Model DescriptionMKPX-2 Mounting Kit for 2.375 inch
(optional) (60 mm) OD mast.
MKPX-3 Mounting Kit for 2.875 inch(optional) (73 mm) OD mast.
MKPX-4 Mounting Kit for 3.5 inch(optional) (89 mm) OD mast.
MKPX-5 Mounting Kit for 4 inch(optional) (102 mm) OD mast.
MKPX-6 Mounting Kit for 4.5 inch(optional) (114 mm) OD mast.
Mounting Hardware Kit Required.
890 to 960 MHz Medium-Gain Half-Parabolic AntennaV Polarization
(vertically polarized)
16 inches(406 mm)
18 inches(457 mm)
46.5 inches
(1181 mm)
Order Information:
Model Description
MF-900B Half-parabolic antenna 890–960 MHz
MF-940B Half-parabolic antenna 928–953 MHz
MF-950B Half-parabolic antenna 940–960 MHz
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 239/365
806–960 MHz Radome Protected Log-Periodic AntennaH or V Polarization
10042-H
CL-900B
806–960 MHz
10 dBi gain
H-POLor
V-POL
(Shown vertically pol
Mounting Equipment:
Model Description
MKPS-1 Mounting Kit for 2.375 inch(optional) (60 mm) OD mast.
MKPS-2 Mounting Kit for 2.875 inch(optional) (73 mm) OD mast.
MKPS-3 Mounting Kit for 3.5 inch(optional) (89 mm) OD mast.
MKPS-4 Mounting Kit for 4 inch(optional) (102 mm) OD mast.
MKPS-5 Mounting Kit for 4.5 inch(optional) (114 mm) OD mast.
Mounting Hardware Kit Required.
Specifications:
Frequency range 806–960 MHz (broadband)
Gain 10 dBi
Impedance 50 ohms
VSWR < 1.5:1
Polarization Horizontal or vertical
Front-to-back ratio >35 dB
Maximum input power 500 watts (at 50°C)
H-plane beamwidth 64 degrees (half-power)E-plane beamwidth 49 degrees (half-power)
Connector N female
Weight 22 lb (10 kg)
Dimensions 29 x 17 x 12 inches(737 x 432 x 305 mm)
Wind load at 93 mph (150kph)Side/Top/Rear 63 lbf / 16 lbf / 37 lbf
(279 N) / (69 N) / (164 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 31 x 20 x 14.5 inches(787 x 508 x 368 mm)
Shipping weight 28.0 lb (12.7 kg)
H-plane
Horizontal pattern – V-polarizationVertical pattern – H-polarization
E-planeHorizontal pattern – H-polarization
Vertical pattern – V-polarization
12 inches(305 mm)
17 inches(432 mm)
29 inches(737 mm)
Top
Side
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 240/3654
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 241/365
Omnidirectional Antennas
225
Frequency Electrical
Range Gain Model Downtilt Polarization Connector Height Page
698-894 MHz 6 dBi 840 10510 0° X 7-16 DIN 24 inches 2271710–2170 9 dBi
6 dBi 840 10511 0° X 7-16 DIN 24 inches 227
9 dBi
6 dBi 840 10512 0° X 7-16 DIN 24 inches 227
9 dBi integrated combiner
6 dBi 840 10513 0° X 7-16 DIN 24 inches 227
9 dBi integrated combiner
806-960 MHz 2 dBi K751161 0° V N 13.7 inches 228
824-894 MHz 11 dBi 738 192 0° V 7-16 DIN 127.4 inches 229
870-960 MHz 8 dBi OGB6-915N 0° V N 60.6 inches 230
8 dBi 736 350 0° V 7-16 DIN 60.6 inches 230
11 dBi OGB9-915N 0° V N 119.5 inches 231
11 dBi 736 347 0° V 7-16 DIN 119.5 inches 231
890-960 MHz 5 dBi K7515641 0° V N 28.1 inches 232
902-928 MHz 10 dBi 840 10250 0° H N 83.9 inches 233
902-928 MHz 13.4 dBi SL11-915N/DT2 2° H N 180.25 inches 234
928-953 MHz 13.4 dBi SL11-940N/DT2 2° H N 156.25 inches 235
1710-2700 MHz 2 dBi 800 10431 0° V N 4.55 inches 236
2500-2700 MHz 11 dBi 800 10442 0° V 7-16 DIN 44.6 inches 237
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 242/365
A N T E N N A S
Kathrein’s omni-directional antennas are extremely
robust, using the finest fiberglass, brass and aluminum.
Applicable mounting hardware is fabricated from stainless
steel. Many models may be inverted. Higher gain antennas
can be provided with downtilt as well.
Kathrein’s Omni-directional antennas are well suited for:
✦ Wireless
✦ Paging
✦ SMR
✦ Land Mobile
✦ SCADA
✦ WISP
Of special note are Kathrein’s Paraslot® horizontally
polarized omni-directional antennas. These outstanding
performers offer the system designer addition polarization
protection from the many vertically polarized and unlicensed
systems in the 902-928 MHz band. The Paraslot design has
earned itself a reputation for reliability among the many
UHF-TV broadcasters who’ve employed it for day-in, day-out
operations for nearly 30 years.
226
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 243/365
Dualband 700 MHz Omni AntennaX Polarization
Gain 6 dBi, 9 dB
698–894 MHz1710–2170 MH
X - POL
0° Electrical Down
840 10510, 840 1051
840 10512, 840 1051
Mounting Equipment:
Description
Designed to be mounted on top of a utilitypole using a custom mounting bracketsupplied by the customer.
Order Information:
Model Description
840 10510 Brown Omni Antenna
840 10511 Grey Omni Antenna
840 10512 Brown Omni Antenna with Combiner
840 10513 Grey Omni Antenna with Combiner
Specifications : 698–806 MHz 806–894 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz
Gain (typical) 4.5 dBi 6.5 dBi 9 dBi 9 dBi 8.5 dBi
Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)
+45° and -45° polarization 37° (half-power) 30° (half-power) 19° (half-power) 17° (half-power) 17.5° (half-power)vertical beamwidth
11202-D
24 inches(609 mm)
26.8 inches(682 mm)
13.9 inches(353 mm)
16 inches(407 mm)
Arrows indicate the direction
of maximum signal strength
698–894 MHz
Horizontal pattern±45°-polarization
880 MHz
Vertical pattern±45°-polarization
880 MHz
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
1710–2170 MHz
Horizontal pattern±45°-polarization
1945 MHz
Vertical pattern±45°-polarization
1945 MHz
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
NE W
General specifications:
Frequency range 698–894 MHz1710–2170 MHz
VSWR <1.5:1
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Polarization +45° upper and lower band-45° upper and lower band
Connector 2 or 4 x 7-16 DIN female (long neck)
Isolation intrasystem >30 dBintersystem >40 dB (698–894 // 1710–2170 MHz)
Combiner With or without integrated combiner
Radome color Brown or grey
Weight 45 lb (20.4 kg)
Height 24 inches (609 mm)
Radome diameter 16 inches (407 mm)
Wind load at 93 mph (150kph)Side 32 lbf (138 N)
Wind survival rating 100 mph (160 kph)
Shipping dimensions 32 x 20 x 19 inches(813 x 508 x 483 mm)
Shipping weight 52 lb (23.6 kg)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 244/36528
806–960 MHz Omnidirectional AntennaV Polarization
Gain 2 dBi
806–960 MHz
V - POL
0° Electrical Downtilt
K751161
13.7 inches(348 mm)
16.7 inches(424 mm)
Specifications:
Frequency range 806–960 MHz
Gain 2 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x5w) IM3: -150dBc
Polarization Vertical
Maximum input power 100 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 78 degrees (half-power)
Connector N female
Weight 1.6 lb (.74 kg)
Height 13.7 inches (348 mm)
Radome diameter 0.83 inches (21 mm)
Wind load at 93 mph (150kph)Side 4 lbf (17 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 17.9 x 4.4 x 3.8 inches(455 x 112 x 97 mm)
Shipping weight 3 lb (1.4 kg)
Order Information:
Model Description
K751161 Antenna with N connector0° electrical downtilt
Mounting Equipment:
Description
Mounting hardware supplied.A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.
B
MOUNTING
A
H-plane
Horizontal patternV-polarization
E-planeVertical patternV-polarization
10062-I936.450/j
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 245/365
806–894 MHz Omnidirectional AntennaV Polarization
Gain 11 dBi
806–894 MHz
V - POL
738 192
H-plane
Horizontal patternV-polarization
E-planeVertical patternV-polarization
127.4 inches(3237 mm)
136.5 inches(3467 mm)
Mounting Equipment:
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
Specifications:
Frequency range 806–894 MHz
Gain 11 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150dBc
Polarization Vertical
Maximum input power 500 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 7 degrees (half-power)
Connector 7-16 DIN female
Weight 18.7 lb (8.5 kg)
Height 127.4 inches (3237 mm)
Radome diameter 2 inches (51 mm)
Wind survival rating 110 mph (180 kph)
Wind load at 93 mph (150kph)Side 52 lbf (230 N)
Shipping dimensions 138.4 x 5.8 x 4.4 inches(3516 x 148 x 112 mm)
Shipping weight 26.6 lb (12 kg)
11242-A936.1375/h
MOUNTING
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 246/36530 11031-B936.1275/h
Specifications:
Frequency range 870–960 MHz
Gain 8 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: -150dBc
Polarization Vertical
Maximum input power 500 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 13 degrees (half-power)
Connector N or 7-16 DIN female
Weight 12 lb (5.4 kg)
Height 60.6 inches (1540 mm)
Radome diameter 2 inches (51 mm)
Wind survival rating 120 mph (200 kph)
Wind load at 93 mph (150kph)Side 30 lbf (130 N)
Shipping dimensions 70 x 6 x 5 inches(1778 x 153 x 127 mm)
Shipping weight 14 lb (6.4 kg)
H-plane
Horizontal patternV-polarization
E-planeVertical patternV-polarization
Order Information:
Model Description
OGB6-915N Antenna with N connector0° electrical downtilt
736 350 Antenna with 7-16 DIN connector0° electrical downtilt
Mounting Equipment:
Description
Mounting hardware supplied.
For masts of 2 to 3.75 inch (50 to 94 mm) OD.
60.6 inches(1540 mm)
69.6 inches(1768 mm)
870–960 MHz Omnidirectional AntennaV Polarization
Gain 8 dBi
870–960 MHz
V - POL
0° Electrical Downtilt
OGB6-915N, 736 350
MOUNTING
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 247/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 248/36532
H-plane
Horizontal patternV-polarization
E-planeVertical patternV-polarization
10046-K936.376/ij
Specifications:
Frequency range 890–960 MHz
Gain 5 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x5w) IM3: <-150dBc
Polarization Vertical
Maximum input power 250 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 30 degrees (half power)
Connector N female
Weight 2.0 lb (0.9 kg)
Height 28.1 inches (715 mm)
Radome diameter 0.83 inches (21 mm)
Wind load at 93 mph (150kph)Side 5 lbf (20 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 32.5 x 4.4 x 3.8 inches(825 x 112 x 97 mm)
Shipping weight 5.0 lb (2.3 kg)
Order Information:
Model Description
K7515641 Antenna with N connectorOGB3-900N 0° electrical downtilt
B
MOUNTING
A
28.1 inches(715 mm)
30.9 inches(786 mm)
890–960 MHz Omnidirectional AntennaV Polarization
Gain 5 dBi
890–960 MHz
V - POL
0° Electrical Downtilt
K7515641
Mounting Equipment:
Description
Mounting hardware supplied.A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 249/365
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
H-planeVertical patternH-polarization
E-planeHorizontal pattern
H-polarization
Specifications:
Frequency range 902–928 MHz
Gain 10 dBi (maximum)
Impedance 50 ohms
VSWR < 1.5:1
Polarization Horizontal
Maximum input power 100 watts (at 50°c)
H-plane beamwidth 12 degrees (half-power)
Connector N
Weight 13.5 lb (6.1 kg)
Height 83.9 inches (2131 mm)
Radome diameter 2.6 inches (65 mm)
Wind load at 93 mph (150kph)Side 24 lbf (105 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions 92 x 6 x 6 inches (2337 x 152 x 152 mm)
Shipping weight 25 lb (11.3 kg)
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
Mounting Equipment:
Model Description
Mounting kits are available for attachment to a flat verticalsurface or to masts with 2.375 to 3.5 inch (60 to 89 mm) OD.
MKPS-13 Mounting Kit for mounting to a(optional) flat plate
MKPP-23 Mounting Kit for 2.375 to 3.5 inch(optional) (60 to 89 mm) OD mast.
See Mechanical Accessories Section for more information.
10964-D
902–928 MHz Omnidirectional PARASLOT ® AntennaH Polarization
PARASLOT ®
Gain 10 dBi
902–928 MHz
H - POL
0° Electrical Down
840 10250
The Kathrein-Scala 840 10250 Paraslot ® antenna is specificallydesigned for spread spectrum systems and other applications
in the 902–928 MHz ISM band, featuring high gain and an offset
omnidirectional pattern.
The H-polar ized 840 10250 provides isolat ion f romco-channel and adjacent-channel V-polarized signals. The
Kathrein-Scala Paraslot design used in these antennas has earned
a reputation for high performance and reliability in thousands oflow-power UHF-TV broadcast transmission systems during the
past 25 years.
83.9 inches(2131 mm)
2.6 in (65 mm)
23.7 inches(602 mm)
The top mounting bracket should belocated approximately 2 in. (51 mm)below the radome collar. The bottommounting bracket should be locatedapproximately 4 in. (102 mm) abovethe bottom of the antenna.
Radome collar
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 250/36534
H-plane
Vertical patternH-polarization2° electrical downtilt
E-planeHorizontal pattern
H-polarization
Specifications:
Frequency range 902–928 MHz
Gain 13.4 dBi (maximum)
Impedance 50 ohms
VSWR < 1.35:1
Polarization Horizontal
Maximum input power 300 watts (at 50°c)
H-plane beamwidth 5.8 degrees (half-power)
Electrical downtilt 2 degrees (other values optional)
Connector N female
Weight 26 lb (11.8 kg)
Height 180.25 inches (4578 mm)
Diameter 2.375 inches (60 mm)
Wind load at 93 mph (150kph)Side 64 lbf (283 N)
Wind survival rating 100 mph (161 kph)
Shipping dimensions 190 x 6 x 6 inches(4826 x 152 x 152 mm)
Shipping weight 48.0 lb (21.8 kg)
10059-J
Mounting Equipment:
Model Description
MKPS-13 Mounting Kit for mounting to a flat plate(optional)
MKPP-23 Mounting Kit for 2.375 to 3.5 inch(optional) (60 to 89 mm) OD mast.
MKGK-1 Guy Kit(optional)
MKSK-1 Spreader Kit(optional)
See Mechanical Accessories Section for more mounting information.
Kathrein Scala Division recommends that this antenna be secured from the top in addition to the standard bottom mounting. Contact Kathrein Scala Division Engineering for assistance.
180.25 inches(4578 mm)
2.375 in (60 mm)
SL11-915/DT2
PARASLOT ®
Gain 13.4 dBi
902–928 MHz
H-POL
2° Electrical Downtilt
902–928 MHz Omnidirectional PARASLOT ® AntennaH Polarization
The Kathrein-Scala SL11-915/DT2 Paraslot antenna isspecifically designed for spread spectrum systems and
other applications in the 902–928 MHz ISM band, featuring
high gain and an offset omnidirectional pattern.
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 251/365
10072-J
Specifications:
Frequency range 928–953 MHz
Gain 13.4 dBi (maximum)
Impedance 50 ohms
VSWR < 1.35:1
Polarization Horizontal
Maximum input power 300 watts (at 50°c)
H-plane beamwidth 5.8 degrees (half-power)
Electrical downtilt 2 degrees (other values optional)
Connector N female
Weight 25.0 lb (11.3 kg)
Height 156.25 inches (3969 mm)
Diameter 2.375 inches (60 mm)
Wind load at 93 mph (150kph)Side 54 lbf (240 N)
Wind survival rating 100 mph (161 kph)
Shipping dimensions 167 x 7 x 6 inches
(4242 x 178 x 152 mm)Shipping weight 35 lb (15.9 kg)
H-plane
Vertical patternH-polarization2° electrical downtilt
E-planeHorizontal pattern
H-polarization
156.25 inches(3969 mm)
2.375 in (60 mm)
928–953 MHz Omnidirectional PARASLOT ® AntennaH Polarization
The Kathrein-Scala SL11-940/DT2 Paraslot antenna is specificallydesigned as a central-station antenna for MAS systems operating
in the 928–953 MHz band, featuring high gain and an offset
omnidirectional pattern.
PARASLOT is a registered trademark of Kathrein Inc., Scala Division.
Mounting Equipment:
Model Description
MKPS-13 Mounting Kit for mounting to a flat plate(optional)
MKPP-23 Mounting Kit for 2.375 to 3.5 inch(optional) (60 to 89 mm) OD mast.
MKGK-1 Guy Kit(optional)
MKSK-1 Spreader Kit(optional)
See Mechanical Accessories Section for more mounting information.
Kathrein Scala Division recommends that this antenna be secured from the top in addition to the standard bottom mounting.Contact Kathrein Scala Division Engineering for assistance.
SL11-940/DT
PARASLOT ®
Gain 13.4 dBi
928–953 MHz
H-POL
2° Electrical Down
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 252/36536
Omnidirectional AntennaV Polarization
Specifications:
Frequency range 1710–2700 MHz
Gain 2 dBi
Impedance 50 ohms
VSWR < 1.8:1
Intermodulation (2x20w) IM3:< -150 dBc
Polarization Vertical
Maximum input power 50 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 78°
Connector N female
Weight 0.33 lb (150 g)
Height 4.55 inches (115 mm)
Radome diameter 0.78 inches (20 mm)
Mounting Equipment:
Description
Mounts through a 0.63 inch (16 mm) hole to surfaces of0.39 inch (10 mm) thick.
Antenna may be inverted.
800 10431
2 dBi gain
1710–2700 MHz
V-POL
E-planeVertical patternV-polarization
H-plane
Horizontal patternV-polarization
10975-A936.2913
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 253/365
2500–2700 MHz Omni AntennaV Polarization
Gain 11 dBi
2500–2700 MH
V - POL
0° Electrical Down
800 10442
H-planeHorizontal pattern
V-polarization
E-planeVertical patternV-polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
49.7 inches(1262 mm)
MOUNTING
44.6 inches(1132 mm)
Order information:
Model Description
800 10442 2500–2700 MHz Omni antenna
Specifications:
Frequency range 2500–2700 MHz
Gain 11 dBi
Impedance 50 ohms
VSWR < 1.5:1
Intermodulation (2x20w) IM3: <-150 dBc
Polarization Vertical
Maximum input power 200 watts (at 50°C)
H-plane beamwidth OmniE-plane beamwidth 7 degrees (half-power)
Connector 7-16 DIN female
Weight 9.9 lb (4.5 kg)
Height approx. 44.6 inches (1132 mm)
Radome diameter 2 inches (51 mm)
Wind load at 93 mph (150kph)Side 25 lbf (110 N)
Wind survival rating 120 mph (200 kph)
Shipping dimensions approx. 48.5 x 5.8 x 4.4 inches(1232 x 148 x 112 mm)
10979-D936.3117/c
Mounting Clamps Included
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 254/3658
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 255/365
Indoor and Special Application Antennas
Frequency Horizontal
Range Model Beamwidth Polarization Page
790–960 MHz 800 10249 Omni V 241
1425–3800 MHz
5150–6000 MHz
790–960 MHz 800 10709 Omni V 242
1710–2700 MHz
790–960 MHz 800 10465 90° V 243
1710–2700 MHz
790–960 MHz 800 10677 90° V 244
1710–2700 MHz +45° and -45°
1710–2700 MHz 741 573 Omni V 245
1710–6000 MHz 800 10430 Omni V 246
239
Horizontal
Model Connector Beamwidth Polarization Page
GPS-C N Omni RHCP 247
800 10147 N Omni V 248
OG-860/1920/GPS-A N Omni V, RHCP 249
E-911
Indoor
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 256/365
A P P L I C A T I O N A N T E N N A S
E xtending wireless coverage to the interior of buildings
is the goal of distributed antenna systems, and Kathrein
has many indoor antenna models to meet the requirements
of any system. Our broad band devices cover the standard
wireless bands, with several models that encompass spectrum
employed by WiFi, WiMAX, and UNII protocols.
In conjunction with our power dividers and power taps the
system designer may accommodate virtually any distributed
antenna configuration.
240
Kathrein-Scala offers f ixed mount GPS antennas for
timing, oscillator synchronization and 911 applications.
A new offering for the wireless carrier is our low profile,
dualband omni. Designed especially for utility pole
installation, this antenna is ideal for microcell applications in
urban and suburban environments.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 257/365
Indoor Omnidirectional AntennaV Polarization
790–960 MHz1425–3800 MH5150–6000 MH
800 10249
3.7 inches(94 mm)
10.2 inches(258 mm)
Specifications:
Frequency range 790–960 MHz1425–3800 MHz5150–6000 MHz
Gain ≈ 2 dBi
Impedance 50 ohms
VSWR 790–806 MHz < 1.7:1806–960 MHz < 1.5:11425–1710 MHz < 2.0:11710–2200 MHz < 1.4:1
2200–3800 MHz < 1.6:15150–6000 MHz < 2.2:1
Polarization Vertical
Maximum input power 50 watts (at 50°C)
H-plane beamwidth Omni
Connector N female
Protection class IP 30
Weight 1 lb (0.47 kg)
Dimensions 10.2 x 10.2 x 3.7 inches(258 x 258 x 94 mm)
Shipping dimensions 10.9 x 10.9 x 6.7 inches(277 x 277 x 169 mm)
10848-C936.2506/c
Mounting Options:
Description
Mounts to ceiling using three screws (two types supplied).A 1.4 in. (35 mm) hole is required for the N connector.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 258/36542
Omnidirectional Indoor AntennaHorizontal and Vertical Polarization
800 10709
790–960 MHz1710–2700 MHz
11315-A936.3783
Specifications: 790–960 MHz / 1710–2700 MHz
Frequency range 790–960 MHz1710–2700 MHz
VSWR 790–960 MHz < 2:11710–2700 MHz < 2:1
Polarization Vertical
Specifications: 2500–2700 MHz
Frequency range 2500–2700 MHzVSWR < 2:1
Polarization Horizontal
General specifications:
Gain ≈ 2 dBi
Impedance 50 ohms
Maximum input power 50 watts (at 50°C)
H-plane beamwidth Omni
Connector 2 x N female
Protection class IP 30
Weight 1.1 lb (0.5 kg)
Dimensions 10.2 x 10.2 x 3.7 inches
(258 x 258 x 94 mm)Shipping dimensions 10.9 x 10.9 x 6.7 inches
(277 x 277 x 169 mm)
Mounting Mounts to ceiling using three screws(two types supplied).
790–9601710–2700
VPol2500–2700
HPol
N N
3.7 inches(94 mm)
10.2 inches(258 mm)
Clip the protective housing into position after
the antenna has been mounted with the help
of the three supplied screws.
min. ∅ 2.6 inches
(min. ∅ 65 mm)
Mounting Options:
Description
Mounts to ceiling using three screws (two types supplied).A 1.4 in. (35 mm) hole is required for the N connector.
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 259/365
Indoor Directional Antenna with Integrated CombinerVertical Polarization
800 10465
90°
790–960 MHz1710–2700 MH
Indoor Antennawith
Integrated Combi
Specifications:
Frequency range 790–960 MHz and 1710–2700 MHz
Gain 7 dBi approx.
Impedance 50 ohms
VSWR 790–806 MHz < 2.2:1806–960 MHz < 2.0:11710–2700 MHz < 2.0:1
Polarization Vertical
Maximum input power 50 watts (at 50° C)
H-plane beamwidth 90 degrees approx. (half-power)
Connector N female connector with 39 inch (1 m)RG-223/CU coax pigtail
Protection class IP 30
Weight 1.1 lb (0.5 kg)
Dimensions 9 x 5.5 x 1.7 inches(231 x 140 x 50 mm)
Shipping dimensions 14.3 x 6 x 2.4 inches(363 x 152 x 62 mm)
Shipping weight 2 lb (0.9 kg)
11006-B936.3036/b
Mounting:
Mount the attachment plate to the wallusing two screws of 4 mm diameter(not supplied) in the position as indicated.
Align the antenna over theattachment plate.
Pull the antenna to the stop.
C
806–960VPol
1710–2700VPol
N
Mounting Options:
Description
Mounting clip supplied
H-planeHorizontal pattern – V-polarization
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
0
3 0
6 0
90
1 2 0
1 5 0
180 2 1 0
2 4 0
270
3 0 0
3 3 0
3
10
20
30
E-planeVertical pattern – V-polarization
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 260/36544 11229-A936.3616
Dualband Indoor Directional Antennawith Integrated CombinerVertical and X Polarization
800 10677
90°
790–960 MHz1710–2700 MHz
Indoor Antennawith
Integrated Combiner
Specifications:
Frequency range 790–960 MHz and 1710–2700 MHz
Gain 7 dBi approx.
Impedance 50 ohms
VSWR < 2.0:1
Polarization790–960 MHz Vertical1710–2700 MHz +45° and -45°
Maximum input power 50 watts (at 50° C)
H-plane beamwidth 90 degrees approx. (half-power)
Connector N female connectors with 39 inch (1 m)RG-223/CU coax pigtails
Isolation >25 dB
Protection class IP 30
Weight 1.3 lb (0.6 kg)
Dimensions 9.1 x 5.5 x 1.7 inches(232 x 140 x 50 mm)
Shipping dimensions 14.3 x 6 x 2.4 inches(363 x 152 x 62 mm)
Shipping weight 2 lb (0.9 kg)
Mounting Mounting clip supplied
H-planeHorizontal pattern – V-polarization
Mounting Options:
Description
Mounting clip supplied
Mounting:
Mount the attachment plate to the wallusing two screws of 4 mm diameterin the position as indicated.
Align the antenna over theattachment plate.
Pull the antenna to the stop.
C
N
790–960VPol
1710–2700XPol –45
1710–2700XPol +45
N
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 261/365
Mounting Options:
Description
Mounts to ceiling using screws. A 1.4 in. (35 mm) hole is requiredfor the N connector.
741 573
1710–2700 MH
WidebandIndoor Antenna
3.9 inches
(100 mm)
Clip the protective housing into position after the antennahas been mounted using the supplied screws
10717-D936.2010/e
Specifications:
Frequency range 1710–2700 MHz
Gain 2 dBi
Impedance 50 ohms
VSWR 1710–1880 MHz <1.6:11850–1990 MHz <1.6:11920–2170 MHz <1.6:12170–2500 MHz <2:12500–2700 MHz <2.2:1
Polarization Vertical
Maximum input power 50 watts (at 50°C)
H-plane beamwidth Omni
Connector N female
Weight 0.33 lb (0.15 kg)
Dimensions 3.9 x 3.9 x 2 inches(100 x 100 x 50 mm)
Mounting Mounts to ceiling using screws.A 1.4 in. (35 mm) hole is required for the Nconnector.
Indoor Omnidirectional AntennaVertical Polarization
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 262/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 263/365
E-911 AntennaRighthand Circular Polarization
● Receives both GPS precision timing signals .
● Assists in compliance with FCC GPS location requirements.
● All the metal parts are DC grounded.
GPS specifications:
Frequency range 1575.42 ± 10 MHz
Gain 4 dBic
Pre-amp filtering (typical) -30 dB at ± 100 MHz
Polarization Righthand circular
H-plane beamwidth Omni
E-plane beamwidth 105 degrees (half-power)
LNA gain >26 dB
Noise figure <1.6 dB(including pre-filtering)
VSWR Antenna <1.5:1LNA <2:1
Connector N female
DC power +5 Vdc, 20 mA through N output connector
Temperature range -35° C to +70° C
Mechanical specifications:
Weight 1.25 lb (0.57 kg)
Height 5.5 inches (140 mm)
Radome diameter 2 inches (51 mm)
Wind load at 93 mph (150kph)Side 2 lbf (6 N)
Wind survial rating 120 mph (200 kph)
Gain 4 dBic
1575 MHz
RHCP
GPS-C
2 inches
(51 mm)
5.5 inches
(140 mm)
2.6 inches
(65 mm)
3.2 inches
(80 mm)
Mounting
Mounting Information:
Description
Mounting hardware supplied.
For masts of 2.125 to 3 inch (55 to 75 mm) OD.10833-C
Horizontal pattern
Vertical pattern
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 264/36548
Dualband Omnidirectional AntennaVertical Polarization
Gain 2 dBi
824–960 MHz1805–2170 MHz
V-POL
Indoor & Outdoor
800 10147
H-plane
Horizontal patternV-polarization
E-planeVertical patternV-polarization
● Unity-gain dualband fixed-station antennas.
● Compact in size and rugged in construction.
● Superior electrical and mechanical design and performance.
● Long service life.
● All metal parts are DC grounded.
Specifications:Frequency range 824–960 MHz
1805–2170 MHz
Gain 2 dBi
Impedance 50 ohms
VSWR < 2.0:1
Intermodulation (2x20w) IM3: -150dBc
Polarization Vertical
Maximum input power 50 watts (at 50°C)
H-plane beamwidth Omni
E-plane beamwidth 78 degrees (half-power)
Connector N female
Weight 0.6 lb (0.25 kg)
Height 8.5 inches (216 mm)
Radome diameter 0.79 inches (20 mm)
Mounting Information:
Description
Mounts in a 0.63 inch (16 mm) diameter hole in surfaces of 0.39inch (10 mm) maximum thickness.
10740-A936.2339
Order Information:
Model Description
800 10147 Dualband Omnidirectional Antenna
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 265/365
Dualband E-911 AntennaVertical or Righthand Circular Polarization
Wireless specifications: (Receive only)
Frequency range 824–894 MHz1850–1990 MHz
Gain 824–894 MHz 1.5 dBi1850–1990 MHz 2 dBi
VSWR 824–894 MHz < 2.0:11850–1990 MHz < 2.0:1
Impedance 50 ohms
Polarization Vertical
H-plane beamwidth Omni
E-plane beamwidth824–894 MHz 75 degrees (half-power)1850–1990 MHz 65 degrees (half-power)
Connector N female
● Receives both GPS precision timing signals andwireless phone bands.
● TDOA (time-difference of arrival) systemsready.
● Assists in compliance with FCC GPS location
requirements.
● All metal parts are DC grounded.
GPS specifications:
Frequency range 1575.42 ± 10 MHz
Gain 4 dBic
Pre-amp filtering (typical) -30 dB at ± 100 MHz
Polarization Righthand circular
H-plane beamwidth Omni
E-plane beamwidth 105 degrees (half-power)
LNA gain >26 dB
Noise figure <1.6 dB(including pre-filtering)
VSWR Antenna <1.5:1LNA <2:1
Connector N female
DC power +5 Vdc, 20 mA through Noutput connector
Temperature range -35° C to +70° C
Mechanical specifications:
Weight 1.65 lb (0.75 kg)
Height 13 inches (330 mm)
Radome diameter 2 inches (51 mm)
Wind load at 93 mph (150kph)Side 4 lbf (15 N)
Wind survial rating 120 mph (200 kph)
Gain 1.5, 2 dB
4 dBic
824–8941850–19901575 MHz
V-POL
RHCP
OG-860/1920/GPS
Mounting 10816-C
Mounting Information:
Description
Hardware is included for mounting to a 2.125 to 3 inch(55 to 75 mm) OD mast.
2 inches(51 mm)
2.6 inches
(65 mm)
3.2 inches
(80 mm)
13 inches(330 mm)
Horizontal pattern Vertical pattern
1850–1990 MHz
Horizontal pattern Vertical pattern
1575 MHz
Vertical patternHorizontal pattern
824–894 MHz
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 266/3650
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 267/365
Frequency Range (MHz) Maximum Input Power Model Page
824–835 / 869–880 MHz < 400 W (high band) 782 10168, 782 10169, 782 10170 287835–851 / 880–896 MHz < 400 W (high band) 782 10171, 782 10172 287
835–851 / 880–896 MHz < 400 W (high band) 782 10215, 782 10216 285824–846.5 / 869–891.5 MHz < 400 W (high band) 782 10257 285
824–846.5 / 869–891.5 MHz < 800 W (high band) 782 10265 285
1850-1930 / 1930-1990 MHz < 150 W (low or high band) 792 544 289
Duplexers
TMA’s, Filters, & Electrical Accessories
Power Dividers & Power Taps Frequency Range Model Page
694–2700 MHz 860 10017 2-way power divider for indoor use only 268
860 10018 3-way power divider for indoor use only 268
860 10019 4-way power divider for indoor use only 268
694–3800 MHz 860 10100 2-way RF power divider for outdoor & indoor use 263
860 10102 3-way RF power divider for outdoor & indoor use 263
860 10104 4-way RF power divider for outdoor & indoor use 263
694–3800 MHz 860 10101 2-way RF power divider for outdoor & indoor use 263
860 10103 3-way RF power divider for outdoor & indoor use 263
860 10105 4-way RF power divider for outdoor & indoor use 263
790–960 MHz PDL2-55, PDL3-333, PDL4-2222 RF power divider for outdoor & indoor use 264
790–960 MHz / 1710–2500 MHz 860 10023, K63236001 Adjustable indoor power tap 265
694–2700 MHz 860 10136, 860 10137, 860 10138 Indoor power tap 267
CombinersFrequency Range Maximum Input Power Model Page
380–960 / 1710–2700 MHz < 700 W 782 10680, 782 10681, 782 10682, 782 10683 269Dualband Combiner
470–960 / 1710–2700 MHz < 650 W / < 350 W 782 10660, 782 10661, 782 10662, 782 10663 271782 10664, 782 10665 - Dualband Combiner
1850–1910 / 1930–1990 MHz < 250 W 782 10809, 782 10810 2731710–1755 / 2110–2155 MHz Dualband Combiner
1850–1910 / 1930–1990 MHz < 275 W 782 10469, 782 10808 275
1710–1755 / 2110–2155 MHz Dualband Combiner
1710–2180 / 2400–2700 MHz < 300 W 782 10800 782 11091, 782 11092, 782 11093 277782 11094, 782 11095 - Dualband Combiner
698–2690 MHz < 60 W 782 10504 - Hybrid Combiner 279
806–960 MHz < 300 W 792 699 - Hybrid Combiner 281
806–960 MHz or 1710–2170 < 60 W 782 10500, 782 10502 - Hybrid Combiner 283
Model Description Page
782 10401 Dual tower mount amplifier PCS/PCS/24 dB 259
782 10404 Dual tower mount amplifier PCS/PCS/24 dB 261
782 10601 Dual tower mount amplifier PCS/AWS/12dB 255
782 10606 Dual tower mount amplifier AWS/AWS/12dB 257
782 10811 Dual tower mount amplifier PCS/PCS/12dB 253
Tower Mount Amplifiers
251
Filters, Couplers, Circulators, Hybrid Ring Junctions, 50 Ohm Loads, GPS AmplifierSee the following page for summary list.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 268/365
E L E C T R I C A L
Kathrein offers an extensive line of filter products for wireless
applications, including hybrids, milled filters, duplexers, ferrites, power
dividers and taps, diplexers/combiners, and high performance tower
mounted amplifiers, virtually every electrical accessory needed to satisfy
both everyday design problems and “special circumstance” issues is
available.
From difficult to routine, Kathrein has the right filter to give maximum
performance.
252
CouplersFrequency Range Maximum Input Power Model Page
800–2200 MHz < 100 W 793 555 - 3 dB Coupler with Cable Absorber 300
800–1900 MHz < 350 W 792 964, 792 965 - 6 dB Couplers 297792 966, 792 967 - 10 dB Couplers
806–960 MHz < 500 W 793 506 - 3 dB Coupler (90° Hybrid) 295
800–2200 MHz < 300 W 793 554 - 3 dB Coupler (90° Hybrid) 298
806–960 MHz < 500 W K637061, K637067 - 3 dB Couplers (90° Hybrid) 294
806–960 MHz < 350 W 792 937, 792 170 - 4.7 dB Couplers 296793 105, 792 180 - 6 dB Couplers793 106, 793 107 - 7 dB Couplers793 108, 790 213 - 10 dB Couplers
1700-2200 MHz < 300 W 793 006 - 3 dB Coupler 299
1700-2200 MHz < 150 W 792 702 - 3 dB Coupler with Cable Absorber 301
Frequency Range Model Page
806-960 MHz 728 044, 729 812 - Decoupled Power Splitters 302
806–960 MHz K6373621 - Hybrid Ring Junction 303
890–960 MHz 790 881 - Hybrid Ring Junction 303
1710-1880 MHz 791 498 - Hybrid Ring Junction 303
0 to 4000 MHz 50 Ohm RF Loads (various power ratings and frequency ranges) 305
1575.42 MHz, L1-signal 860 10142 - Low Noise GPS Amplifier 284
Power Splitters, Hybrid Ring Junctions, 50 Ohm Loads, GPS Amplifier
FiltersFrequency Range Maximum Input Power Model Page
1550–1700 / 1700–1900 MHz < 15 W 791 594, 791 397 - Band-Stop Filter 290
1800–2000 MHz < 15 W 791 398 - Bandpass Filter 292
1800–2000 MHz < 25 W 792 219 - Band-Stop Filter 293
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 269/365
Dual Tower Mount AmplifierPCS/PCS/12 dB
Rx Characteristics:
Frequency range 1850–1910 MHz
Bandwidth 60 MHz
Loss in bypass mode 2.8 dB (typical)
Return loss > 18 dB (DC ON)> 15 dB (DC OFF)
Gain -40 – +65° C 12 ± 1.3 dB+22 – +28° C 12 ± 0.7 dB
Noise figure -40 – +65° C <2.2 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
+22 – +28° C <1.7 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
Output 1-dB compression point >15 dBm
3rd order intercept point (OIP3) >25 dBm
DualTower Mount Amp
782 10811
Ant 0
Ant 1
BTS 0
BT
• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability• By-pass mode to ensure cell operation in case of DC power down• Built-in lightning protection• Compact size• DTMA AISG feed via BTS 0 port or BTS 1 port for both TMAs• AISG DC supply either through one of the ports BTS 0 or BTS 1,
or simultaneously through both ports BTS 0 and BTS 1• Current Window Alarm DC supply feed via BTS 0 (TMA 0) and BTS 1 (TMA 1)
Environmental Characteristics:
Operating temperature range -40 – +65°C
IP rating IP 67*MTBF >1,000,000 hours (per TMA)
EMC ETS 300 342-3
Lightning protection 5 kA, 8/20 μs RF connections and AISG port
Tx Characteristics:
Frequency range 1930–1990 MHz
Bandwidth 60 MHz
Insertion loss < 0.5 dB over the middle 80% of BWa further 0.25 dB over the remaining BW
Input power < 160 W (+52 dBm) CW<1.6 kW (+62 dBm) Peak
Intermodulation products in Rx band < -160 dBc (3rd order; with 2 x 20 W)
Return loss >18 dB
DC and Alarm Characteristics: CWA-Mode AISG-Mode
DC supply 9–15 V 9–30 V
Operating current per TMA 80-–130 mA 95 mA 9 V (nominal)without RET 35 mA at 30 V (nominal)
Alarm management 170–200 mA AISG 1.1/2.0
Modem characteristics AISG 1.1/2.0(data rate 9.6 kb)
Mechanical Characteristics:
Material Aluminum housing
ConnectorsRF 7-16 DIN female, long neckAISG connector 8 pin female, IEC 60130-9*(compliance AISG 1.1/2.0) (Pin 6: 9 – 30 V DC, pin 3: RS485B,
pin 5: RS485A, pin 7: DC return;other pins: Not connected)
Mounting Wall mounting with 4 screws (8mm max.)Mast mounting with optional clamp set.
Weight approx. 11 lb (5 kg)
Dimensions (without connectors 10.9 x 6.5 x 3.1 inchesor mounting brackets) (278 x 166 x 77.5 mm)
Shipping dimensions 19.8 x 10.3 x 8.4 inches(502 x 262 x 214 mm)
* The DTMA is not designed for permanent operation under water.
Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours 11089-FROa936.A2553
RET Remote Electrical TiltAISG Antenna Interface Standards GroupCWA Current Window Alarm
TMA TMA
PCS BTS 0 PCS BTS 1
PCS Ant 0 PCS Ant 1
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 270/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 271/365
Fullband DupleTower Mount Amp
782 10601
* The DTMA is not designed for permanent operation under water.Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours
• Kathrein redundancy amplifier design for improved system reliability• Built-in lightning protection
• Compact size• Suitable for antenna RET control according to AISG standard
10957-A936.A2404/b
Fullband Duplex Tower Mount AmplifierPCS/AWS/12 dB
Tx Characteristics: PCS AWS
Frequency range 1930–1990 MHz 2110–2155 MHz
Bandwidth 60 MHz 45 MHz
Insertion loss < 0.5 dB over the middle 80% of BW < 0.3 dBa further 0.25 dB over the remaining BW
Ripple ±0.2 ±0.1
Input power < 200 W (+53 dBm) < 200 W (+53 dBm)
Intermodulation products in Rx band < –160 dBc (3rd order; with 2 x 20 W) < –160 dBc (3rd order; with 2 x 20 W)
Return loss 18 dB 18 dB
Rx Characteristics: PCS AWS
Frequency range 1850–1910 MHz 1710–1755 MHz
Bandwidth 60 MHz 45 MHz
Return loss 18 dB 18 dB
Gain -40 – +65° C 12 ± 1.3 dB 12 ± 1 dB+22 – +28° C 12 ± 0.7 dB 12 ± 0.35 dB
Noise figure -40 – +65° C < 2.1 dB over the middle 80% of BW < 1.3 dBa further 0.3 dB over the remaining BW
+22 – +28° C < 1.6 dB over the middle 80% of BW < 1 dBa further 0.3 dB over the remaining BW
Output 1-dB compression point >15 dBm >15 dBm
3rd order intercept point (OIP3) >25 dBm >25 dBm
Mechanical Characteristics:
Material Aluminum housing
Connectors RF 7-16 DIN female long neckAISG connector 8-pin female, IEC 60130-9 (AISG)(Compliance AISG) (Pin 3: RS485B, pin 5: RS485A, pin 6: +24 VDC nominal,
pin 7: DC return; other pins: NC)
Mounting Wall mount with 4 screws (max. 8mm dia.)Mast mount with optional clamp set
Weight 11 lb (5 kg)
Dimensions 10.9 x 6.5 x 3.1 in (278 x 166 x 77.5 mm)
Shipping dimensions 19.8 x 10.3 x 8.4 in (502 x 262 x 214 mm)
Environmental Characteristics:
Operating temperature range -40 – +65°C
IP rating IP 67*
MTBF >1,000,000 hours (per TMA)
EMC ETS 300 342-3
DC and Alarm Characteristics:
DC supply without RET +10 – +30 VDC (negative ground)
Operating current PCS 100 ±20 mA (+10 – +15 VDC)AWS < 200 mA
Alarm management PCS CWA, > 180 mAAWS AISG
Modem characteristics According to AISG standard 1.1(data rate: 9.6 kB)
PCS BTS
PCS Ant
AWS A
AWS B
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 272/36556
782 10601
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
Must be mounted with the AISG connector at the bottom.
See Mechanical Accessories section for more information.
Fullband Duplex Tower Mount AmplifierPCS/AWS/12 dB
Node B
M8 x 10Grounding screw
BTS ANT
AISGConnector
3.9 in(98.7 mm)
6.8 in(172 mm)
15.9 in(404.5 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 273/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 274/36558
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
See Mechanical Accessories section for more information.
782 10606Fullband Duplex Tower Mount Amplifier
AWS/AWS/12 dB
M8 x 10Grounding screw
BTS ANT
15.9 inches(405 mm)
6.8 inches(172 mm)
Must be mounted with the AISGconnector at the bottom.
3.9 inches(99 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 275/365
Dual Tower Mount AmplifierPCS/PCS/24 dB
Rx Characteristics:
Frequency range 1850–1910 MHz
Bandwidth 60 MHz
Loss in bypass mode 2.8 dB (typical)
Return loss > 18 dB (DC ON)> 15 dB (DC OFF)
Gain -40 – +65° C 24 ± 1.2 dB+22 – +28° C 24 ± 0.6 dB
Noise figure -40 – +65° C <2.1 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
+22 – +28° C <1.6 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
Output 1-dB compression point >19 dBm
3rd order intercept point (OIP3) >28 dBm
DualTower Mount Amp
782 10401
Ant 0
Ant 1
BTS 0
BT
• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability• By-pass mode to ensure cell operation in case of TMA (Alarm 2) or DC power down• Alarm management: Supports 2 alarm levels
Alarm 1: One LNA of the balanced circuit failedAlarm 2: Both LNAs of the balanced circuit failed
Automatically switched to bypass mode• Built-in lightning protection• Compact size• DTMA DC supply and alarming separately via BTS 0 repectively BTS 1 port
Environmental Characteristics:Operating temperature range -40 – +65°C
IP rating IP 67*
MTBF >1,000,000 hours (per TMA)
EMC ETS 300 342-3
Lightning protection 5 kA, 8/20 μs pulse
Tx Characteristics:
Frequency range 1930–1990 MHz
Bandwidth 60 MHz
Insertion loss < 0.5 dB over the middle 80% of BWa further 0.25 dB over the remaining BW
Input power < 160 W (+52 dBm) CW<1.6 kW (+62 dBm) Peak
Intermodulation products in Rx band < -117 dBm (2 Tx carriers at +43 dBm)
Return loss >18 dB
DC and Alarm Characteristics:
DC supply +12V nominal (7.5–15V, minus grounded)Typically 230 mA per TMA
Alarm management Current window alarm handlingAlarm current Ia Alarm 1: Ia > 310 mA
Alarm 2: Ia > 500 mA
Mechanical Characteristics:
Material Aluminum housing
RF connectors 7-16 DIN female
Mounting Wall mounting with 4 screws (8mm max.)Mast mounting with optional clamp set.
Weight 11 lb (5 kg)
Dimensions 10.9 x 6.5 x 3.1 inches(278 x 166 x 77.5 mm)
Shipping dimensions 19.8 x 10.3 x 8.4 inches(502 x 262 x 214 mm)
* The DTMA is not designed for permanent operation under water.
Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours
BTS 0 BTS 1
Ant 1Ant 0
DTMA
10934-A936.2937/b
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 276/36560
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mast mounting with optional clamp set above.
Wall mounting with 4 screws (8mm max.)
See Mechanical Accessories section for more information.
782 10401Dual Tower Mount Amplifier
PCS/PCS/24 dB
M8 x 10Grounding screw
BTS ANT
15.9 inches(405 mm)
6.8 inches(172 mm)
3.9 inches(99 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 277/365
DualTower Mount Amp
782 10404
10753-D936.2939/c
Environmental Characteristics:
Operating temperature range -40 – +65°CIP rating IP 67*
MTBF >1,000,000 hours (per TMA)
EMC ETS 300 342-3
Lightning protection 5 kA, 8/20μs RF connections and AISG port
Tx Characteristics:Frequency range 1930–1990 MHz
Bandwidth 60 MHz
Insertion loss < 0.5 dB over the middle 80% of BWa further 0.25 dB over the remaining BW
Input power < 160 W (+52 dBm) CW<1.6 kW (+62 dBm) Peak
Intermodulation products in Rx band < -117 dBm (2 Tx carriers at +43 dBm)
Return loss >18 dB
Rx Characteristics:
Frequency range 1850–1910 MHz
Bandwidth 60 MHz
Loss in bypass mode <2.8 dB (typical)Return loss > 18 dB (DC ON)
> 15 dB (DC OFF)
Gain -40 – +65° C 24 ± 1.2 dB+22 – +28° C 24 ± 0.6 dB
Noise figure -40 – +65° C <2.1 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
+22 – +28° C <1.6 dB over the middle 80% of BWa further 0.3 dB over the remaining BW
Output 1-dB compression point >19 dBm
3rd order intercept point (OIP3) >28 dBm
• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability
• By-pass mode to ensure cell operation in case of DC power down
• Built-in lightning protection• Compact size
• Suitable for antenna RET control according to AISG standard• DTMA DC supply and AISG feed via BTS 0 port for both TMAs
DC and Alarm Characteristics: Through Node BO Port only
DC supply +12V nominal (9–15V, minus grounded)without RET Typically 250 mA per TMA
Alarm management According to AISG standard 1.1
Modem characteristics According to AISG standard 1.1Data rate: 9.6 kB
Mechanical Characteristics:
Connectors RF 7-16 DIN femaleAISG connector 8-pin female, IEC 60130-9(compliance AISG 1.1) (Pin 1: +12 V DC nominal, pin 3: RS485B, pin 5: RS485A,
pin 7: DC return; other pins: Not connected)
Weight 11 lb (5 kg)
Dimensions 10.9 x 6.5 x 3.1 inches(278 x 166 x 77.5 mm)
Shipping dimensions 19.8 x 10.3 x 8.4 inches(502 x 262 x 214 mm)
Ant 0
Ant 1
Node B0AISG andDC-Port
Nod
* The DTMA is not designed for permanent operation under water.
Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours
Dual Tower Mount AmplifierPCS/PCS/24 dB
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 278/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 279/365
694–3800 MHz RF Power dividers 860 1010n Serie
694–3800 MH
For outdoor an
indoor applicatio
11051-C936.2956/b
Kathrein Scala Division RF power dividers are designed for use in a number ofprofessional applications including multi-element antenna arrays and radiating cable
systems and other cases where efficient broadband power splitting is required.
These dividers feature low insertion loss and excellent impedance match. Carefuland conservative mechanical designs assure a long service life with high reliability
and stability in even the most difficult environmental conditions.
Mounting Options:
Model Description
131 1847 Mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast.
860 10104
860 10105
860 10105
11.3 inches(286 mm)
2.4 inches(61 mm)
11.4 inches(289 mm)
2.6 inches(65 mm)
2.1 inches(54 mm)
2.5 inches(63 mm)
860 10104
Order Information:
Model Description
860 10100 2-way RF power divider, 200 watts, N female
860 10102 3-way RF power divider, 200 watts, N female
860 10104 4-way RF power divider, 200 watts, N female
860 10101 2-way RF power divider, 700 watts, 7-16 DIN female
860 10103 3-way RF power divider, 700 watts, 7-16 DIN female
860 10105 4-way RF power divider, 700 watts, 7-16 DIN female
Specifications:
Frequency range 694–3800 MHz 694–3800 MHz
Impedance 50 ohms 50 ohms
Insertion loss <0.05 dB <0.05 dB
Split 860 10100 2-way 860 10101 2-way860 10102 3-way 860 10103 3-way
860 10104 4-way 860 10105 4-wayVSWR <1.3:1 (694–894 MHz) <1.3:1 (694–894 MHz)
<1.15:1 (790–3800 MHz) <1.15:1 (790–3800 MHz)
Maximum input power 200 watts (at 50°C) 700 watts (at 50°C) )
Connector N female 7-16 DIN female
Intermodulation (2x20w) IM3: <-150 dBc IM3: <-150 dBc
Temperature range -55°C to +60°C -55°C to +60°C
Weight (max.) 1.7 lb (0.78 kg) 2.1 lb (0.96 kg)
Dimensions (maximum) 11.4 x 2.5 x 2.1 inches 11.3 x 2.6 x 2.4 inches(289 x 63 x 54 mm) (286 x 65 x 61 mm)
Shipping dimensions 11.8 x 3 x 3 inches 11.8 x 3 x 3 inches(300 x 75 x 75 mm) (300 x 75 x 75 mm)
Shipping weight 2.7 lb (1.2 kg) 2.9 lb (1.3 kg)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 280/36564
790–960 MHz RF Power dividers
• Equal power splits. Available with 6, 8, 10, or 12-way splits.
• Special mounting arrangements for alternate mast sizes, etc.
Please contact Kathrein-Scala sales engineering for information andpricing on RF power dividers designed for your specific requirements.
PDL Series
* Note: Dimensions shown do notinclude connectors.
790–960 MHz
Specifications: PDL2-55 PDL3-333 PDL4-2222
Frequency range 790-960 MHz 790-960 MHz 790-960 MHz
Impedance 50 ohms 50 ohms 50 ohms
Insertion loss <0.5 dB <0.5 dB <0.5 dBSplit 50%/50% 33.3%/33.3%/33.3% 25%/25%/25%/25%
VSWR <1.2:1 <1.2:1 <1.2:1
Maximum input power 100 watts 100 watts 100 watts
Connector N female N female N female
Weight 2 lb (0.9 kg) 2 lb (0.9 kg) 2.25 lb (1 kg)
Dimensions* 5.6 x 4.6 x 3.25 inches 5.6 x 4.6 x 3.25 inches 5.6 x 4.6 x 3.25 inches(142 x 117 x 83 mm) (142 x 135 x 83 mm) (142 x 150 x 83 mm)
Special orders withuneven power splits.
PDL3-333
Order Information:
Model Description
PDL2-55 RF power divider for outdoor & indoor
PDL3-333 RF power divider for outdoor & indoor
PDL4-2222 RF power divider for outdoor & indoor
Mounting Options:
Description
Included for masts of 1.25 to 2.375 inch (32 to 60 mm) OD.
3.25 inches(83 mm)
5.6 inches(142 mm)
4. 6 i n c h
e s
( 1 1 7 m
m )
For outdoor andindoor applications.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 281/365
Continuously Adjustable RF Indoor Power Tap
790–960 MHz1710–2500 MH
Indoor Power TaContinuously Adjus
K63236001, 860 10
10827-C
936.3914936.2261/b
Order Information:
Model Description
K63236001 Adjustable indoor power tap
860 10023 Adjustable indoor power tap
Specifications: K63236001 860 10023
Frequency range 790–960 MHz 870–960 MHz1710–2170 MHz 1710–2500 MHz
Power split ratio -5 dB to -15 dB -5 dB to -15 dBcontinuously adjustable (75%/25% to 97%/3%) (75%/25% to 97%/3%)
Impedance 50 ohms 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc IM3: <-150 dBc
Insertion loss <0.1 dB <0.1 dB
VSWR <2.1:1 (790–824 MHz)
<1.7:1 (824–960 MHz) <1.7:1 (870–960 MHz)<1.7:1 (1710–2170 MHz) <1.7:1 (1710–2500 MHz)
Maximum input power 100 watts (at 50°C) 100 watts (at 50°C)
Connector N female N female
Environmental conditions IP 52 IP 52
Weight 1.1 lb (0.5 kg) 1.1 lb (0.5 kg)
Dimensions* 9.3 x 3.9 x 1 inches 10.4 x 3.9 x 1 inches(235 x 100 x 25 mm) (263 x 100 x 25 mm)
Shipping dimensions 9.8 x 4.4 x 4 inches 10.9 x 4.4 x 1.6 inches(249 x 111 x 40 mm) (277 x 111 x 40 mm)
Shipping weight 1.5 lb (0.68 kg) 1.5 lb (0.68 kg)
* Excludes connectors.
● DC transmission only between input and port P1.
P2 is coupled capacitively.
P1Output
P2Output
P input
Adjust tap todesired split ratio ↔
Splitting table:
P2:P
1[dB] P
1:P
input[dB] P
2:P
input[dB]
-5 -1.2 (75%) -6.2 (25%)
-10 -0.4 (91%) -10.4 (9%)
-15 -0.1 (97%) -15.1 (3%)
↔ ↔ ↔ ↔ ↔ ↔
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 282/36566
Scale Power Split
(dB) Ratio (x:1) P1 (%) P2 (%) P1 (dB) P2 (dB)
-5.00 . . . . . . . . .3.2 . . . . . . . . 76.0% . . . . . . . .24.0% . . . . . . . . -1.2 . . . . . . . . . -6.2
-5.25 . . . . . . . . .3.3 . . . . . . . . 77.0% . . . . . . . .23.0% . . . . . . . . -1.1 . . . . . . . . . -6.4
-5.50 . . . . . . . . .3.5 . . . . . . . . 78.0% . . . . . . . .22.0% . . . . . . . . -1.1 . . . . . . . . . -6.6
-5.75 . . . . . . . . .3.8 . . . . . . . . 79.0% . . . . . . . .21.0% . . . . . . . . -1.0 . . . . . . . . . -6.8
-6.00 . . . . . . . . .4.0 . . . . . . . . 79.9% . . . . . . . .20.1% . . . . . . . . -1.0 . . . . . . . . . -7.0
-6.25 . . . . . . . . .4.2 . . . . . . . . 80.8% . . . . . . . .19.2% . . . . . . . . -0.9 . . . . . . . . . -7.2
-6.50 . . . . . . . . .4.5 . . . . . . . . 81.7% . . . . . . . .18.3% . . . . . . . . -0.9 . . . . . . . . . -7.4
-6.75 . . . . . . . . .4.7 . . . . . . . . 82.6% . . . . . . . .17.4% . . . . . . . . -0.8 . . . . . . . . . -7.6
-7.00 . . . . . . . . .5.0 . . . . . . . . 83.4% . . . . . . . .16.6% . . . . . . . . -0.8 . . . . . . . . . -7.8
-7.2 5 . . . . . . . . .5.3 . . . . . . . . 84.1% . . . . . . . .15.9% . . . . . . . . -0.7 . . . . . . . . . -8.0
-7.50 . . . . . . . . .5.6 . . . . . . . . 84.9% . . . . . . . .15.1% . . . . . . . . -0.7 . . . . . . . . . -8.2
-7.75 . . . . . . . . .6.0 . . . . . . . . 85.6% . . . . . . . .14.4% . . . . . . . . -0.7 . . . . . . . . . -8.4
-8.00 . . . . . . . . .6.3 . . . . . . . . 86.3% . . . . . . . .13.7% . . . . . . . . -0.6 . . . . . . . . . -8.6-8.25 . . . . . . . . .6.7 . . . . . . . . 87.0% . . . . . . . .13.0% . . . . . . . . -0.6 . . . . . . . . . -8.9
-8.50 . . . . . . . . .7.1 . . . . . . . . 87.6% . . . . . . . .12.4% . . . . . . . . -0.6 . . . . . . . . . -9.1
-8.7 5 . . . . . . . . .7.5 . . . . . . . . 88.2% . . . . . . . . 11.8% . . . . . . . . -0.5 . . . . . . . . . -9.3
-9.00 . . . . . . . . .7.9 . . . . . . . . 88.8% . . . . . . . . 11.2% . . . . . . . . -0.5 . . . . . . . . . -9.5
-9.25 . . . . . . . . .8.4 . . . . . . . . 89.4% . . . . . . . .10.6% . . . . . . . . -0.5 . . . . . . . . . -9.7
-9.50 . . . . . . . . .8.9 . . . . . . . . 89.9% . . . . . . . .10.1% . . . . . . . . -0.5 . . . . . . . . -10.0
-9.75 . . . . . . . . .9.4 . . . . . . . . 90.4% . . . . . . . . .9.6% . . . . . . . . -0.4 . . . . . . . . -10.2
-10.00 . . . . . . . .10.0 . . . . . . . . 90.9% . . . . . . . . .9.1% . . . . . . . . -0.4 . . . . . . . . -10.4
-10.25 . . . . . . . .10.6 . . . . . . . . 91.4% . . . . . . . . .8.6% . . . . . . . . -0.4 . . . . . . . . -10.6
-10.50 . . . . . . . . 11.2 . . . . . . . . 91.8% . . . . . . . . .8.2% . . . . . . . . -0.4 . . . . . . . . -10.9
-10.75 . . . . . . . . 11.9 . . . . . . . . 92.2% . . . . . . . . .7.8% . . . . . . . . -0.4 . . . . . . . . -11.1-11.00 . . . . . . . .12.6 . . . . . . . . 92.6% . . . . . . . . .7.4% . . . . . . . . -0.3 . . . . . . . . -11.3
-11.25 . . . . . . . .13.3 . . . . . . . . 93.0% . . . . . . . . .7.0% . . . . . . . . -0.3 . . . . . . . . -11.6
-11.50 . . . . . . . .14.1 . . . . . . . . 93.4% . . . . . . . . .6.6% . . . . . . . . -0.3 . . . . . . . . -11.8
-11.75 . . . . . . . .15.0 . . . . . . . . 93.7% . . . . . . . . .6.3% . . . . . . . . -0.3 . . . . . . . . -12.0
-12.00 . . . . . . . .15.8 . . . . . . . . 94.1% . . . . . . . . .5.9% . . . . . . . . -0.3 . . . . . . . . -12.3
-12.25 . . . . . . . .16.8 . . . . . . . . 94.4% . . . . . . . . .5.6% . . . . . . . . -0.3 . . . . . . . . -12.5
-12.50 . . . . . . . .17.8 . . . . . . . . 94.7% . . . . . . . . .5.3% . . . . . . . . -0.2 . . . . . . . . -12.7
-12.75 . . . . . . . .18.8 . . . . . . . . 95.0% . . . . . . . . .5.0% . . . . . . . . -0.2 . . . . . . . . -13.0
-13.00 . . . . . . . .20.0 . . . . . . . . 95.2% . . . . . . . . .4.8% . . . . . . . . -0.2 . . . . . . . . -13.2
-13.25 . . . . . . . .21.1 . . . . . . . . 95.5% . . . . . . . . .4.5% . . . . . . . . -0.2 . . . . . . . . -13.5
-13.50 . . . . . . . .22.4 . . . . . . . . 95.7% . . . . . . . . .4.3% . . . . . . . . -0.2 . . . . . . . . -13.7
-13.75 . . . . . . . .23.7 . . . . . . . . 96.0% . . . . . . . . .4.0% . . . . . . . . -0.2 . . . . . . . . -13.9
-14.00 . . . . . . . .25.1 . . . . . . . . 96.2% . . . . . . . . .3.8% . . . . . . . . -0.2 . . . . . . . . -14.2
-14.25 . . . . . . . .26.6 . . . . . . . . 96.4% . . . . . . . . .3.6% . . . . . . . . -0.2 . . . . . . . . -14.4
-14.50 . . . . . . . .28.2 . . . . . . . . 96.6% . . . . . . . . .3.4% . . . . . . . . -0.2 . . . . . . . . -14.7
-14.75 . . . . . . . .29.9 . . . . . . . . 96.8% . . . . . . . . .3.2% . . . . . . . . -0.1 . . . . . . . . -14.9
-15.00 . . . . . . . .31.6 . . . . . . . . 96.9% . . . . . . . . .3.1% . . . . . . . . -0.1 . . . . . . . . -15.1
Continuously Adjustable RF Indoor Power Tap63236001, 860 10023
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 283/365
11246-A936.3575/a
694–2700 MHz RF Indoor Power Tap
694–2700 MH
RF Power Tap
For Indoor Applicat
860 10136, 860 10137, 860 10
Mounting Options:
Description
None needed
For indoor use only.
General specifications:
Frequency range 694–2700 MHz
Impedance 50 ohms
Intermodulation (2x20w) IM3: <-150 dBc
Insertion loss <0.05 dB
VSWR 694–790 MHz <2.0:1790–2500 MHz <1.5:12500–2700 MHz <2.0:1
Maximum input power 100 watts (at 50°C)
Connector N female
Weight 1.1 lb (0.5 kg)
Dimensions 9.6 x 2.5 x 1 inches(244 x 64 x 25 mm)
Shipping dimensions 10.5 x 4.4 x 3.7 inches(267 x 111 x 95 mm
Shipping weight 1.5 lb (0.68 kg)
Mounting None needed
Environmental conditions IP 52
● DC transmission only between input and port P1.
P2
is coupled capacitively.
9.6 inches(244 mm)
2.5 inch(64 mm)
1 inch(25 mm)
P1
P2=P1-(6dB)Capacitive coupled to input
Order Information:
Model Description
860 10136 Indoor power tap
860 10137 Indoor power tap
860 10138 Indoor power tap
Specifications: 860 10136 860 10137 860 10138
Tap lossInput↔ P
1-1.0 dB
-0.4 dB
-0.1 dB
Input↔ P2
-7.0 dB
-10.4 dB
-15.1 dB
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 284/36568
10819-B936.2248/b
Specifications:
Frequency range 694–2700 MHz
Impedance 50 ohms
Insertion loss <0.05 dB
Power split ratio860-10017 50%/50%860-10018 33.3%/33.3%/33.3%860-10019 25%/25%/25%/25%
VSWR 694–864 MHz 790–2500 MHz 2500–2700MHz860-10017 <1.5:1 <1.25:1 <2.0:1860-10018 <1.5:1 <1.25:1 <2.0:1860-10019 <1.5:1 <1.3:1 <2.0:1
Intermodulation (2x20w) IM3: <-150dBc
Maximum input power 100 watts
Connector N female
DC capability DC transmission between all terminations(suitable for remote power supply systems)
Environmental conditions IP 52
Weight 1.3 lb (0.6 kg)
Dimensions 8 x 2.5 x 1.6 inches (maximum)(204 x 63 x 41 mm)
Shipping dimensions 9.5 x 4.3 x 3.7 inches (maximum)(242 x 110 x 95 mm)
Mounting For indoor use only. Mounting hardware is notincluded.Kathrein-Scala recommends the use of nylon tiestraps for mounting.
Order Information:
Model Description
860 10017 2-way power divider for indoor use only
860 10018 3-way power divider for indoor use only
860 10019 4-way power divider for indoor use only
860-10019
8 inches(204 mm)
1 inch(25 mm)
1 inch(25 mm)
Mounting Options:
Description
For indoor use only.
Mounting hardware is not included.
Kathrein-Scala recommends the use of nylon tie straps for mounting.
694–2700 MHz RF Indoor Power Divider
694–2700 MHz
RF Power Divider
or Indoor Applications
60 10017, 860 10018, 860 10019
860 10019
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 285/365
• Designed for co-siting purposes.
• Enables feeder sharing.
• Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
• Suitable for indoor or outdoor applications.
• Wall or mast mounting.
• Available as a single unit or a double unit for X-Pol antennas.
• Built-in lightning protection.
• DC stop available as an accessory.
• Extremely low insertion loss.
• High input power.
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit (optional) for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.
See Mechanical Accessories section for more information.
380–960 MHz
1710–2700 MH
Dualband Combiner
11245-A936.3749
782 10680, 782 1068
782 10681, 782 1068
782 10680, 782 10682
Single Unit
782 10681, 782 10683
Double Unit
Specifications: 782 10680 Single Unit 782 10682 Single Unit
782 10681 Double Unit 782 10683 Double Unit
Pass bandBand 1 380–960 MHz 380–960 MHzBand 2 1710–2700 MHz 1710–2700 MHz
Impedance 50 ohms 50 ohms
VSWR < 1.2:1 (380–960 / 1710–2700) < 1.2:1 (380–960 / 1710–2700)
Insertion lossPort 1↔Port 3 <0.1 dB (380–960 MHz) <0.1 dB (380–960 MHz)Port 2↔Port 3 <0.1 dB (1710–2700 MHz) <0.1 dB (1710–2700 MHz)
Isolation
Port 1↔Port 2 > 55 dB (380–550 MHz) > 55 dB (380–550 MHz)> 65 dB (550–960 MHz) > 65 dB (550–960 MHz)> 65 dB (1710–2700 MHz) > 65 dB (1710–2700 MHz)
Input powerBand 1 / Band 2 < 700 watts / <700 watts < 700 watts / < 700 watts
Intermodulation < 160 dBc (3rd order; with 2 x 20 W) < 160 dBc (3rd order; with 2 x 20 W)
Operating temperature -55° to +60° C -55° to +60° C
Connector 7-16 DIN female (long neck) 7-16 DIN female (long neck)
Application Indoor or outdoor (IP 66) Indoor or outdoor (IP 66)
DCAISG transparencyPort 1↔Port 3 By-pass (2500 mA maximum) StopPort 2↔Port 3 By-pass (2500 mA maximum) By-pass (2500 mA maximum)
Lightning protection 3 kA, 10/350 μs pulse 3 kA, 10/350 μs pulse
WeightSingle unit 4.9 lb (2.2 kg) 4.9 lb (2.2 kg)
Double unit 9.5 lb (4.3 kg) 9.5 lb (4.3 kg)Dimensions
Single unit 9.6 x 5 x 2.1 inches (318 x 122 x 67 mm) 9.6 x 5 x 2.1 inches (318 x 122 x 67 mm)Double unit 9.6 x 5 x 4.3 inches (318 x 122 x 118 mm) 9.6 x 5 x 4.3 inches (318 x 122 x 118 mm)
Shipping dimensionsSingle unit 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm) 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm)Double unit 14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm) 14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm)
380 – 960 1710 – 2700 3800 – 960 1710 – 1700
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 286/36570
782 10680, 782 10662 Dualband Combiner
782 10681, 782 10683
4 screws M5 x 12
4.6 inches(118 mm)
2.6 inches(67 mm)
4.8 inches(122 mm)
10.7 inches(271 mm)
1.6 inches(41 mm)
1.9 inches(49 mm)
3.6 inches(91 mm)
1.6 inches(41 mm)
1.4 inches(35 mm)
4 inches(102 mm)
11.3 inches
(288 mm)12.5 inches(318 mm)
1.9 inches(49 mm)
8.3 inches(210 mm)
6.9 inches(176 mm)
2.5 inches(64 mm)
Typical Attenuation Curves
Diagram II
Port 1 Port 3 Port 2 Port 3
Diagram I
Port 1 Port 3 Port 2 Port 3
Order Information:
Model Description
782 10680 Single Dualband combiner - By-pass / By-pass
782 10681 Double Dualband combiner - By-pass / By-pass
782 10682 Single Dualband combiner - Stop / By-pass
782 10683 Double Dualband combiner - Stop / By-pass
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 287/365
• Designed for cable sharing/reduction in PCS and WiMAX®
systems.
• Can be used as a combiner near the BTS or in a reciprocal function
near the antenna.
• Suitable for indoor or outdoor applications.
• Wall or mast mounting.
• Built-in lightning protection.
• External DC stop available as an accessory.
• Available as a single unit, or for XPol anten-nas as a double unit
• Very low insertion loss.
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit (optional) for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.
See Mechanical Accessories section for more information.
470–960 MHz
1710–2700 MH
Dualband Combiner
11244-A936.3891
782 10660, 782 10662, 782 106
782 10661, 782 10663, 782 106
782 10660, 782 10662, 782 106
Single Unit
782 10661, 782 10663, 782 106
Double Unit
Specifications:
Pass bandBand 1 470–960 MHzBand 2 1710–2700 MHz
Impedance 50 ohms
VSWR < 1.2:1 (470–960 / 1710–2700)
Insertion lossPort 1↔Port 3 <0.15 dB (470–960 MHz) (0.1 dB typical)Port 2↔Port 3 <0.2 dB (1710–2700 MHz) (0.1 dB typical)
IsolationPort 1↔Port 2 > 55 dB (470–960 MHz)
> 65 dB (1710–2700 MHz)Input power
Band 1 / Band 2 < 650 watts / < 350 watts
Intermodulation < 160 dBc (3rd order; with 2 x 20 W)
Operating temperature -55° to +60° C
Connector 7-16 DIN female (long neck)
Application Indoor or outdoor (IP 66)
DCAISG transparency 782 10660 Single Unit 782 10662 Single Unit 782 10664 Single Unit
782 10661 Double Unit 782 10663 Double Unit 782 10665 Double Unit
Port 1↔Port 3 By-pass (2500 mA maximum) Stop By-pass (2500 mA maximum)Port 2↔Port 3 By-pass (2500 mA maximum) By-pass (2500 mA maximum) Stop
Lightning protection 3 kA, 10/350 μs pulse
WeightSingle unit 2.6 lb (1.2 kgDouble unit 5.3 lb (2.4 kg)
Dimensions without connectors or mounting bracketsSingle unit 5.7 x 5 x 1.5 inches (145 x 126 x 38 mm)Double unit 5.7 x 5 x 3.7 inches (145 x 126 x 93 mm)
Shipping dimensionsSingle unit 11.2 x 6.2 x 3.7 inches (285 x 157 x 93 mm)Double unit 11,2 x 6.2 x 5.8 inches (285 x 157 x 148 mm)
470 – 960 1710 – 2700470 – 960 1710 – 2700 470 – 960 1710 – 2700
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 288/36572
782 10660, 782 10662, 782 10664 Dualband Combiner
782 10661, 782 10663, 782 10665
Order Information:
Model Description
782 10660 Single Dualband combiner - By-pass / By-pass
782 10661 Double Dualband combiner - By-pass / By-pass
782 10662 Single Dualband combiner - Stop / By-pass
782 10663 Double Dualband combiner - Stop / By-pass
782 10664 Single Dualband combiner - By-pass / Stop
782 10665 Double Dualband combiner - By-pass / Stop
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
A t t e n u a t i o n / d B
Frequency/MHz
1710 – 2700
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
470 – 960
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.00 300 600 900 1200 1500 1800 2100 2400 2700 3000
A t t e n u a t i o n / d B
Frequency/MHz
1710 – 2700470 – 960
Typical Attenuation Curves
Diagram II
Port 1 Port 3 Port 2 Port 3
Diagram I
Port 1 Port 3 Port 2 Port 3
Side viewSingle Unit
Top viewSingle Unit,Double Unit
Side viewDouble Unit
3.7 inches(93 mm)
2.1 inches(53 mm)
5 inches(126 mm)
8.1 inches(206 mm)
5.7 inches(145 mm)
1.4 inches(35 mm)
1.5 inches(38 mm)
2.2 inches(55 mm)
0.8 inches(21 mm)
1.4 inches(35 mm)
4.6 inches(40 mm)
2.4 inches(60 mm)
8.8 inches(224 mm)
9.6 inches(244 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 289/365
• Designed for co-siting purposes.
• Enables feeder sharing.
• Suitable for indoor or outdoor applications (IP 66).
• DC pass through between all ports.
• External DC Stop available as an accessory.
782 10809
Single unit
782 10809, 782 108
Order Information:
Model Description
782 10809 Dualband combiner, single unit
782 10810 Dualband combiner, double unit
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit (optional) for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
See Mechanical Accessories section for more information.
1850–1910/1930–19901710–1755/2110–2155
Dualband Combiner
11069-A936.3344
Specifications:
Pass band
PCS 1850–1910 (Rx) / 1930–1990 (Tx) MHzAWS 1710–1755 (Rx) / 2110–2155 (Tx) MHz
Impedance 50 ohms
VSWR < 1.25:1 (1850–1910 / 1930–1990 MHz)< 1.25:1 (1710–1755 / 2110–2155 MHz)
Insertion lossPort PCS↔Port ANT <0.3 dB (1850–1910 / 1930–1990 MHz)Port AWS↔Port ANT <0.2 dB (1710–1755 / 2110–2155 MHz)
InsolationPort PCS↔Port AWS > 50 dB (1850–1910 / 1930–1990 MHz)
> 50 dB (1710–1755 / 2110–2155 MHz)
Input powerPort PCS < 250 watts (1850–1910 / 1930–1990 MHz)Port AWS < 250 watts (1710–1755 / 2110–2155 MHz)
Intermodulation < -160 dBc (3rd order; with 2 x 20 W)
Operating temperature -40° to +65° C
Connectors 7-16 DIN female (long neck)Application Indoor or outdoor (IP 66)
Lightning protection 3 kA, 10/350 μs
DC/AISG transparency By-pass between all ports (max. 2500 mA)
Weight single unit 5.5 lb (2.5 kg)double unit 11 lb (5 kg)
Dimensions single unit 11.7 x 4.8 x 2.5 inches (296 x 122 x 64 mm)double unit 11.7 x 4.8 x 4.7 inches (296 x 122 x 120 mm)
(includes mounting bracket)
Port PCS Port ANT
0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
A t t e n u a t i o n / d B
Frequency/MHz1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
2110 – 2155
1850 – 1910
1930 – 1990
1710 – 1755
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
A t t e n u a t i o n / d B
Frequency/MHz
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
2110 – 2155
1850 – 1910
1930 – 19901710 – 1755
Typical Attenuation Curves
Port AWS Port ANT
Diagram IDiagram II
Port PortPCS ANT
Port PortAWS ANT
Port PortAWS ANT
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 290/36574
782 10809, 782 10810 Dualband Combiner
The mounting plates can be removed andreplaced with other means of mounting byremoving the screws through (M5 x 10).
Caution: Exceeding the maximum drilleddepth of 8.5 mm with replacementhardware and fasteners may permanentlydamage the unit.
4 screws M5 x 104 spring washers 5.5 DIN 6095
4 screws M5 x 104 spring washers 5.5 DIN 6095
4.7 inches(120 mm)
2.5 inches(64 mm)
4.8 inches(122 mm)
11.7 inches(296 mm)
Accessories:
Model Description
793 301 DC Stop
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 291/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 292/36576
782 10469, 782 10808 Dualband Combiner
The mounting plates can be removed and
replaced with other means of mounting byremoving the screws through (M5 x 10).
Caution: Exceeding the maximum drilleddepth of 8.5 mm with replacementhardware and fasteners may permanentlydamage the unit.
4 screws M5 x 104 spring washers 5.5 DIN 6095
4 screws M5x 104 spring washers 5.5 DIN 6095
4.7 inches(120 mm)
2.5 inches(64 mm)
4.8 inches(122 mm)
11.7 inches(296 mm)
Port PCS Port ANT0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
A t t e n u a t i o n / d
B
Frequency/MHz1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
2110 – 2155
1850 – 1910
1930 – 1990
1710 – 1755
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
A t t e n u a t i o n / d B
Frequency/MHz
1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200
2110 – 2155
1850 – 1910
1930 – 19901710 – 1755
Typical Attenuation Curves
Port AWS Port ANT
Diagram IDiagram II
Port PortPCS ANT
Port PortAWS ANT
Port PortAWS ANT
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 293/365
• Designed for cable sharing/reduction in PCS and WiMAX®
systems.
• Can be used as a combiner near the BTS or in a reciprocal function
near the antenna.
• Suitable for indoor or outdoor applications.
• Wall or mast mounting.
• Built-in lightning protection.
• External DC stop available as an accessory.
• Available as a single unit, or for XPol anten-nas as a double unit
• Very low insertion loss.
Mounting Options:
Model Description
2 x 131 1847 Mounting Kit (optional) for 2 to 5.7 inch(50 to 145 mm) OD mast.
Mounts to a flat surface with four screws (max. 8 mm dia).
Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.
See Mechanical Accessories section for more information.
1710–2180 MH
2400–2700 MH
Dualband Combiner
11344-B936.3367/b
782 10800, 782 11092, 782 11
782 11091, 782 11093, 782 11
General specifications:
Pass bandBand 1 1710–2180 MHzBand 2 2400–2700 MHz
Impedance 50 ohms
VSWR < 1.25:1 (1710–2180 / 2400–2700 MHz)
Insertion lossPort 1↔Port 3 <0.15 dBPort 2↔Port 3 <0.15 dB
InsolationPort 1↔Port 2 > 60 dB
Input power, bands 1 & 2 < 300 watts
Intermodulation < -160 dBc (3rd order; with 2 x 20 W)
Operating temperature -40° to +60° C
Connectors 7-16 DIN female (long neck)
Application Indoor or outdoor (IP 66)
Lightning protection 3 kA 10/350 μs pulse
Weight single unit 6.4 lb (2.9 kg)double unit 12.6 lb (5.7 kg)
Dimensions single unit 12 x 7.8 x 2.5 inches (305 x 199 x 63 mm)double unit 12 x 7.8 x 4.4 inches (305 x 199 x 113 mm)
Shipping dimensionssingle unit 15.4 x 10.7 x 5.5 inches (392 x 272 x 139 mm)double unit 15.4 x 10.7 x 7.4 inches (392 x 272 x 189 mm)
1710 – 2180 2400 – 2700
Specifications: 782 10800 Single Unit 782 11092 Single Unit 782 11094 Single Unit782 11091 Double Unit 782 11093 Double Unit 782 11095 Double Unitt
DC/AISG transparencyPort 1↔Port 3 By-pass (max. 2500mA) Stop By-pass (max. 2500mA)Port 2↔Port 3 By-pass (max. 2500mA) By-pass (max. 2500mA) Stop
1710 – 2180 2400 – 2700 1710 – 2180 2400 – 2700
782 10800, 782 11092, 782 11
Single Unit
782 11091, 782 11093, 782 11
Double Unit
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 294/36578
782 10800, 782 11092, 782 11094 Dualband Combiner
782 11091, 782 11093, 782 11095
2.4 inches
(62 mm)
12 inches(305 mm)
4.4 inches
(113 mm)
7.8 inches
(199 mm)
Typical Attenuation Curves
Diagram I
port 1 port 3 port 2 port 3
Diagram II
port 1 port 3 port 2 port 3
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 295/365
Hybrid Combiner 782 10504
698–2690 MH● Designed for the decoupled combining of two transmitter or receiversignals onto one common antenna.
● The frequency spacing between transmitter signals can be as small asrequired.
● Excellent intermodulation performance.
● Suitable for indoor or outdoor applications.
● Wall or mast mounting.
●
DC by-pass between port 1 and port 3.
11358-A
936.3737
Mounting Options:
Description
Mounts to a flat surface with 4 screws (max. 8 mm diameter)
Optional mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast
is available.
Specifications:
Frequency range 698–2690 MHz
Impedance 50 ohms
VSWR (all ports) < 1.2:1 (698–2170 MHz)< 1.25:1 (2170–2690 MHz)
AttenuationPort 1↔ Port 3 3.1±0.5 dBPort 2↔ Port 3 3.1±0.5 dBPort 1↔ Port 2 >23 dB*
Intermodulation (2x20w) IM3: <-160 dBc
Input powerPort 1 < 60 wattsPort 2 < 60 watts
Temperature range -40° to +55° C
Connectors 7-16 DIN female (long neck)
DC/AISG transparencyPort 1↔ Port 3 By-pass (max. 2500 mA)Port 2↔ Port 3 Stop
Application Indoor or outdoor (IP 66)
Weight 9.5 lb (4.3 kg)
Dimensions 10.9 x 10.4 x 3.3 inches(276 x 264 x 84 mm)
Shipping dimensions 15.2 x 13.6 x 6.6 inches(385 x 345 x 168 mm)
* Valid if all ports are terminated with 50 ohm loads
Max. input power per port
+55 °C 55 W 60 W
+40 °C 70 W 75 W
+25 °C 80 W 85 W
Max. ambienttemperature
Mounted horizontally Mounted vertically
Note: The input power rating of 60 W per port is specified at anambient temperature of +55 °C with the combiner mountedvertically, without additional cooling, and while respecting thesafety standard EN IEC 60950 (max. surface temperature+90 °C). If used at a lower ambient temperature, then ahigher input power in accordance with the following table ispossible:
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 296/36580
782 10504 Hybrid Combiner
10.9 inches
(276 mm)
10.4 inches
(264 mm)
3.3 inches(84 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 297/365
Hybrid Combiner
Specifications:
Frequency range 806–960 MHz
Impedance 50 ohms
VSWR < 1.11:1
AttenuationInput 1↔Antenna port 3±0.4 dBInput 2↔Antenna port 3±0.4 dB
AttenuationInput 1↔Input 2 See Diagram
Intermodulation (2x20w) IM3: -160dBc
Input power < 150 watts total per input max. (300 watts total)16 transmitter signals at each input
Operating temperature 0° to +50° C
Connector 7-16 DIN female (silver-plated)
Dimensions 17.5 x 13.2 x 3.2 inches(444 x 336 x 58.5 mm)
Weight 22.7 lb (10.3 kg)
Special features Tx1 → Antenna PortTx2 → Short (ground)
Note: VSWR and attenuation aremeasured when the remaining ports areterminated with 50 ohm loads.
792 699
806–960 MHzThe hybrid combiner with cable absorber is suitable for combining 2 transmitters or 2 transmittergroups (transmitter combiners) to one common antenna while achieving very low intermodulation.
The frequency spacing between the transmitting frequencies can be as narrow as required. For
technical reasons half the signal power (3 dB) is dissipated by the cable absorber.
Design and Construction: The hybrid combiner with cable absorber consists of a 3 dB couplerand a 10 watt load with an inserted 20 dB attenuation cable.
Function: The 20 dB attenuation cable causes the transmission signals to be highly attenuated
before they reach the load. Thus only intermodulation products of a very low level can be
generated at the load, which are further reduced by 20 dB in the attenuation cable on the returnpath to the antenna output.
10654-A
Mounting Options:
Description
Mounts to a flat surface using four screws and spacers, or 19inch rack mounting (2 height units necessary)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 298/36582
Dimension Inches mm
A 17.5 444
B 16.6 421
C 0.5 11.5
D 3.7 94
E 5.6 143
F 1.2 30
G 1.9 47
H 5.2 132
I 6.5 164
J 12.4 316
K 13.2 336
L ∅ 0.3 ∅ 7
M 0.2 5
N 0.4 10
O 2.3 58.5
P 0.2 4
Q 11.8 300
R 1 24.5
S 0.7 18
T 2 max 51 max
ABC
D
E
F
J
K
G
H
I
L
M N
O
P
Q
R
S
T
792 699 Hybrid Combiner
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 299/365
Hybrid Combiner
Specifications: 782 10500
Frequency range 806–960 MHzImpedance 50 ohms
VSWR (all ports) < 1.15:1
AttenuationPort 1↔ Port 3 3.1±0.5 dBPort 2↔ Port 3 3.1±0.5 dBPort 1↔ Port 2 >22 dB*
Intermodulation (2x20w) IM3: <-160 dBc
Input powerPort 1 < 60 wattsPort 2 < 60 watts
Operating temperature -40° to +55° C
Connector 7-16 DIN female
Application Indoor or outdoor (IP 66)
Dimensions 10.2 x 5.3 x 3.5 inches
(260 x 135 x 90 mm)Mounting Mounts to a flat surface using four screws
(max. 6 mm diameter)
Optional mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast is available.
782 10500, 782 105
806–960 MHzor
1710–2170 MH
11067-FRO936.A2472
Mounting Options:
Description
2 x 131 1487 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.
See Mechanical Accessories section for more information.
● Designed for the decoupled combining of two transmitter or receiver
signals onto one common antenna.
● The frequency spacing between transmitter signals can be as small
as required.
● Excellent intermodulation performance.
● Suitable for indoor or outdoor applications.
Port 3Antenna
Tx1/Tx2/Rx1/Rx2
Port 1Tx1/Rx1
Port 2Tx2/Rx2
Hybrid Combiner
Port 1
Port 2
P
Specifications: 782 10502
Frequency range 1710–2170 MHz
Impedance 50 ohms
VSWR (all ports) < 1.25:1
AttenuationPort 1↔ Port 3 3.1±0.5 dBPort 2↔ Port 3 3.1±0.5 dBPort 1↔ Port 2 >22 dB*
Intermodulation (2x20w) IM3: <-160 dBcInput power
Port 1 < 60 wattsPort 2 < 60 watts
Operating temperature -40° to +55° C
Connector 7-16 DIN female
Application Indoor or outdoor (IP 66)
Dimensions 10.2 x 5.3 x 3.5 inches(260 x 135 x 90 mm)
Mounting Mounts to a flat surface using four screws(max. 6 mm diameter)
Optional mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast is available.
* Valid if all ports are terminated with 50 ohm loads
Order Information:
Model Description
782 10500 Hybrid combiner (806–960 MHz)
782 10502 Hybrid combiner (1710–2170 MHz)
11066-FRO936.A2471
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 300/36584
860 10142
1575.42 MHzL1-signal
11205-A936.3545
Specifications:
Frequency range 1575.42 MHz, L1-signal
Gain 25 ± 2 dB
Noise figure <2.0 dB
VSWR <1.8:1
Operation voltage 3.0–5.5 V, ripple <50 mVsupplied at inner conductorRF-output
Operation current <25 mA
Connectors TNC female (input)N female (output)
Dimensions 2.8 x 1.2 x 0.9 inches(70 x 50 x 22 mm)
The Kathrein 860 10142 low noise amplifier is designed for use with train antennaswith GPS. It includes a preselection filter to prevent interference in case of
simultaneous operation in the 380–960 MHz / 1710–3800 MHz and GPS frequencyranges. The amplifier fulfills the requirements according to EN 50155.
Additional features:
● The maximum input power at the input of the amplifier at the frequency range
380–960 MHz and 1710–3800 MHz is limited to +25 dBm.
● The noise level at the GPS frequency generated by the operation at the
frequency range 380–960 MHz and 1710–3800 MHz should not exceed thethermal noise level at the input of the GPS amplifier, otherwise the noise figure
will be increased.
Environmental conditions:
● Temperature range: –25 °C – +55 °C (data as specified)
–40 °C – +85 °C (extended range)*
● Protection class: IP54 (DIN 40050 / IEC 144)(hanging installation position)
*Extended range of operation: Within an extended temperature range of –40 °C
– +85 °C and an extended supplied voltage range of 3.2 V– 6.0 V operation ispossible with the following restrictions:
Noise figure: < 2.5 dB
Gain: > 20 dB
Mounting Options:
Description
Mount using 4 holes, 4.5 mm diameter
Low Noise GPS Amplifier
InputTNC female
OutputN female
bias-Tbandpassfilter GPS
bandpassfilter GPS
bandpassfilter GPS
amplifier amplifierlowpass
Block Diagram
Input (Antenna)
TNC
Output
(DC +3.0 ... 5.5 V)
N
2.1 inches(53 mm)
3.7 inches(93 mm)
1.2 inches(50 mm)
2.8 inches(70 mm)
0.9 inches(22 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 301/365
824–896 MHz
Indoor Use
782 10215782 10257782 10265
782 10216
The duplexer is designed to combine/split AMPS Tx and Rxsignals to/from one common Tx/Rx antenna in order to save
feeder cable and antenna costs
● Suitable for indoor use.
● Built-in DC stop.
9 inches(229 mm)
3.1 inches(80 mm)
6.9 inches
(175 mm)
6.7 inches(80 mm)
3.1 inches(80 mm)
4.4 inches(112 mm)
or
Specifications: 782 10215 782 10216 782 10257 782 10265
Frequency rangeLow band 824–851 MHz 824–851 MHz 824–846.5 MHz 824–846.5 MHzHigh band 869–896 MHz 869–896 MHz 869–891.5 MHz 869–891.5 MHz
Impedance 50 ohms 50 ohms 50 ohms 50 ohmsVSWR <1.25:1 <1.25:1 <1.25:1 <1.25:1
Insertion lossAntenna→ Low band <0.5 dB <0.5 dB <0.5 dB <0.5 dBHigh band→Antenna <0.5 dB <0.5 dB <0.5 dB <0.5 dB
IsolationLow band↔High band >65 dB >65 dB >70 dB >70 dB
Maximum input power <400 watts (high band) <400 watts (high band) <400 watts (high band) <800 watts (high band)max. 16 carriers max. 16 carriers max. 16 carriers max. 32 carriers
Intermodulation (2x20w) IM3: <-160 dBc IM3: <-160 dBc IM3: <-160 dBc IM3: <-160 dBc
Temperature range -20° to +55° C -20° to +55° C -20° to +55° C -20° to +55° C
Connectors 7-16 DIN female N female 7-16 DIN female 7-16 DIN female
Application Indoor Indoor Indoor Indoor
Dimensions* 9 x 6.7 x 3.1 inches 9 x 6.9 x 3.1 inches 9 x 6.7 x 3.1 inches 9 x 6.7 x 4.4 inches(229 x 170 x 80 mm) (229 x 175 x 80 mm) (229 x 170 x 80 mm) (229 x 170 x 112 mm)
Weight 5.7 lb (2.6 kg) 5.7 lb (2.6 kg) 5.7 lb (2.6 kg) 6.6 lb (3 kg)
Shipping dimensions 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches(309 x 252 x 162 mm) (309 x 252 x 162 mm) (309 x 252 x 162 mm) (309 x 252 x 162 mm)
Mounting Mount using four screws Mount using four screws Mount using four screws Mount using four screws(max. 4 mm diameter) (max. 4 mm diameter). (max. 4 mm diameter) (max. 4 mm diameter)
*Includes connectors and mounting feet
782 10215, 782 10
10865-A936.2384/b
782 10257, 782 10
Mounting Options:
Description
See specifications above.
Duplexer with Built-in DC Stop
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 302/36586
82 10215, 782 10216
82 10257, 782 10265
Duplexer with Built-in DC Stop
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 303/365
10849-B936.2284/c
General specifications: 782 10168, 782 10169, 782 10170 782 10171, 782 10172
Frequency rangeLow band 824–835 MHz 835–851 MHzHigh band 869–880 MHz 880–896 MHz
Impedance 50 ohms 50 ohms
VSWR <1.25:1 <1.25:1
Insertion lossAntenna→ Low band <0.5 dB <0.5 dB
High band→Antenna <0.5 dB <0.5 dBIsolation
Low band↔High band >85 dB >85 dB
Maximum input power <400 watts (high band) <400 watts (high band)max. 8 carriers max. 12 carriers
Intermodulation (2x20w) IM3: <-160 dBc IM3: <-160 dBc
Connectors 7-16 DIN female 7-16 DIN female
782 10168
782 10171
782 10169782 10172
Indoor & Outdo
Versions
Specifications: 782 10170
Temperature range -20° to +55° C
Application Indoor
Dimensions 19” rack mount, 2 height units6.7 inch (170 mm) plug-in depth
Weight 8.2 lb (3.7 kg)
Shipping dimensions 24.1 x 12.3 x 8.8 inches(612 x 312 x 224 mm)
Mounting Mount using four screws(max. 6 mm diameter)
782 10171, 782 10
782 10168, 782 10169, 782 10Duplexer with Built-in DC Stop
Order Information:
Model Description
782 10168 Indoor duplexer
782 10169 Outdoor duplexer
782 10170 Indoor duplexer (19” rack mount)
782 10171 Indoor duplexer
782 10172 Outdoor duplexer
782 10170
(19” drawer)
The duplexer is designed to combine/split AMPS Tx and Rx
signals to/from one common Tx/Rx antenna in order to savefeeder cable and antenna costs
It can be used:
● Indoor and outdoor versions.
● Built-in DC stop.
● 78210168: AMPS A-Band, indoor version
● 78210169: AMPS A-Band, outdoor version
● 78210170: AMPS A-Band,indoor version mounted onto a 19˝drawer
● 78210171: AMPS B-Band, indoor version
● 78210172: AMPS B-Band, outdoor version
Specifications: 782 10168 782 10169 782 10171 782 10172
Temperature range -20° to +55° C -40° to +60° C -20° to +55° C -40° to +60° C
Application Indoor Outdoor (IP 66) Indoor Outdoor (IP 66)
Dimensions 9 x 6.7 x 3.1 inches 12 x 9.4 x 3.7 inches 9 x 6.7 x 3.1 inches 12 x 9.4 x 3.7 inches(229 x 170 x 80 mm) (305 x 238 x 94 mm) (229 x 170 x 80 mm) (305 x 238 x 94 mm)
Weight 6.2 lb (2.8 kg) 12.1 lb (5.5 kg) 6.2 lb (2.8 kg) 12.1 lb (5.5 kg)
Shipping dimensions 12.2 x 9.9 x 6.4 inches 13.7 x 11.7 x 6.8 inches 12.2 x 9.9 x 6.4 inches 13.7 x 11.7 x 6.8 inches(309 x 252 x 162 mm) (347 x 297 x 174 mm) (309 x 252 x 162 mm) (347 x 297 x 174 mm)
Mounting Mount using four screws Wall mount using four screws Mount using four screws Wall mount using four screw(max. 4 mm diameter) (max. 8 mm diameter). (max. 4 mm diameter) (max. 8 mm diameter)
Mount options for 2 to 4.6 inch Mount options for 2 to 4.6 i(50 to 115 mm) OD masts. (50 to 115 mm) OD masts.
NE W
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 304/36588
82 10168, 782 10169, 782 10170
82 10171, 782 10172
Duplexer with Built-in DC Stop
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
802 812 822 832 842 852 862 872 882 892 902
B d / n o i t a u n e t t A
Frequency/MHz
869 – 880824 – 835
0
10
20
30
40
50
60
70
80
90
100
802 812 822 832 842 852 862 872 882 892 902
B d / n o i t a u n e t t A
Frequency/MHz
869 – 880824 – 835
Typical Attenuation Curves (782 10168, 782 10169, 782 10170)
Antenna Low band High band Antenna Antenna Low band High band Antenna
Diagram I Diagram II
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
815 825 835 845 855 865 875 885 895 905 915
B d / n o i t a u n e t t A
Frequency/MHz
880 – 896835 – 851
0
10
20
30
40
50
60
70
80
90
100
815 825 835 845 855 865 875 885 895 905 915
B d / n o i t a u n e t t A
Frequency/MHz
835 – 851 880 – 896
Antenna Low band High band Antenna Antenna Low band High band Antenna
Diagram I Diagram II
Typical Attenuation Curves (782 10171, 782 10172)
Low band Antenna High band
Low band Antenna High band
HighbandAntenna
Low band Antenna High band
Lowband
12 inches
(305 mm)
9.4 inches(238 mm)
12 inches(305 mm)
9.4 inches(238 mm)
12 inches
(305 mm)
12 inches
(305 mm)
9.4 inches(238 mm)
12 inches(305 mm)
782 10168
782 10171
782 10169
782 10172
782 10170
(19” drawer)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 305/365
1850–1910 MH1930–1990 MH
Indoor Use
10867-A936.2464/a
The duplexer is designed to combine/split Tx and Rx signalsto/from one common Tx/Rx antenna in order to save feeder
cable and antenna costs
It features:
● Built-in DC stop.
Specifications:
Frequency rangeLow band 1850–1910 MHzHigh band 1930–1990 MHz
Impedance 50 ohms
VSWR <1.25:1
Insertion lossAntenna→ Low band <0.7 dBHigh band→Antenna <0.7 dB
IsolationLow band↔High band >65 dB
Maximum input power <150 watts (low or high band)
Intermodulation (2x20w) IM3: <-160 dBc
Temperature range -20° to +55° C
Connectors 7-16 DIN female
Application Indoor
Dimensions* 7.9 x 7.6 x 1.7 inches(200 x 192 x 43 mm)
Weight 3.7 lb (1.7 kg)
*Includes connectors and mounting feet
1.7 inches(43 mm)
Low Band
7.6 inches(192 mm)
7.9 inches(200 mm)
Antenna High Band
792 544
Mounting Options:
Description
Mount using four screws (max. 4 mm diameter).
Duplexer with Built-in DC Stop
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 306/36590 10857-A936.958/a
Order Information:
Model Description
791 594 Band-stop filter 1550–1700 MHz(indicate stop band frequency and bandwidth when ordering)
791 397 Band-stop filter 1700–1900 MHz(indicate stop band frequency and bandwidth when ordering)
Specifications:
Frequency range791 594 1550–1700 MHz791 397 1700–1900 MHz
Impedance 50 ohms
Maximum input power <15 watts (at inserion loss of <0.5 dB)
Connectors N female
Temperature range 0° to +50° C
Weight 1.8 lb (0.8 kg)
Dimensions 6.7 x 5.1 x 2.8 inchesincluding connectors (170 x 130 x 72 mm)
Shipping dimensions 8.3 x 6.3 x 3.5 inches(210 x 160 x 90 mm)
The 791 594 and 791 397 Band-stop filters are used whenindividual frequencies are to be attenuated. Due to their
easy tuning they are particularly suitable for laboratory test
purposes.
They can be used for:
● attenuating interfering signals.
● increasing the isolation between a transmitter and areceiver.
● suppressing intermodulation products.
Design and construction: The band-stop filters are built up
of two coaxial resonators mounted on a stable mounting
plate.
Filter characteristics: Narrow stop band with high stop bandattenuation, low insertion loss outside of the stop band.
Tuning: The band-stop filters are factory tuned to the indicated
stop band. Tuning can also be done on site by following the
included instructions. Since both resonators can be tunedindependently, two separate interfering signals can be
attenuated or one interfering signal can be suppressed withvery high attenuation.
For indoor use only.
Tuning examples: 791 594 791 397f0=1550 MHz f
0=1625 MHz f
0=1700 MHz f
0=1700 MHz f
0=1800 MHz f
0=1900 MHz
Stop band attenuationat a stop band bandwidth of:at f
0±0.5 MHz >24 dB >28 dB >30 dB >22 dB >25 dB >33 dB
at f0±0.2 MHz >33 dB >37 dB >39 dB >31 dB >36 dB >45 dB
at f0±0.1 MHz >37 dB >40 dB >45 dB >34 dB >40 dB >50 dB
791 594, 791 397
1550–1700 MHz1700–1900 MHz
Indoor Use Only
Mounting Options:
Description
Mount using four screws (max. 4mm diameter)
Band-Stop Filters
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 307/365
791 594, 791 3Band-Stop Filters
Typical Attenuation Curves
(Tuning examples)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 308/36592
791 398
1800–2000 MHz
Indoor Use Only
10843-A936.968/a
Specifications:
Frequency range 1800–2000 MHz
Impedance 50 ohms
Maximum input power <15 watts
Connector N female
Temperature range 0° to +50° C
Weight 1.3 lb (0.6 kg)
Dimensions 6.8 x 5.1 x 2.3 inches(includes mounting plate) (170 x 130 x 58 mm)
Shipping dimensions 8.3 x 6.3 x 3.5 inches(210 x 160 x 90 mm)
The 791 398 Band-pass filter can be used if several frequencies outsideof a narrow pass band are to be attenuated. Due to its easy tuning it
is particularly suitable for laboratory test purposes.
It can be used:
● To improve the input selectivity of receivers or amplifiers.
● To increase the isolation of transmitters whose respective antennas
are mounted close together.
● To suppress noise sidebands and intermodulation products.
● As a combiner component.
Design and construction: The band-pass filter consists of two
capacitively coupled coaxial resonators mounted on a stablemounting plate.
Filter characteristics: Narrow pass band with low insertion loss, high
stop band attenuation outside the pass band.
Tuning: The band pass filter is factory tuned to the indicated pass band
center frequency f0
with a bandwidth of f0±1.75 MHz. Tuning can also
be done by the customer by following the instructions provided.
For indoor use only.
Tuning examples: f0=1800 MHz f
0=1900 MHz f
0=2000 MHz
Insertion loss <1.2 dB <0.9 dB <0.8 dBat f
0–f
0±1.75 MHz
Stop band attenuationat f
0±10 MHz >16 dB >13 dB >9 dB
at f0±15 MHz >24 dB >20 dB >15 dB
at f0±120 MHz >29 dB >25 dB >20 dB
at f0±125 MHz >33 dB >29 dB >24 dB
VSWR (input)at f
0–f
0±1.75 MHz <1.6:1 <1.35:1 <1.3:1
Typical Attenuation Curves
(Tuning examples)
Mounting Options:
Description
Mount using four screws (max. 4mm diameter)
Band-Pass Filter
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 309/365
10844-A936.1320/a
Specifications:
Frequency range 1800–2000 MHz
Impedance 50 ohms
Maximum input power <25 watts
Connector N female
Temperature range +10° to +40° C
Weight 2.2 lb (1 kg)
Dimensions 7.5 x 5.9 x 2.1 inchesincluding connectors (191 x 149 x 54 mm)
Shipping dimensions 7.9 x 5.9 x 3 inches(200 x 150 x 75 mm)
The 792 219 Band-stop filter is used when individual frequenciesare to be attenuated. Due to its easy tuning it is particularly
suitable for laboratory test purposes.
It can be used for:
● attenuating interfering signals.
● increasing the isolation between a transmitter and a receiver.
● suppressing intermodulation products.
Design and construction: The band-stop filter is built up ofthree coaxial resonators.
Filter characteristics: Narrow stop band with high stop band
attenuation, low insertion loss outside of the stop band.
Tuning: The band-stop filter is factory tuned to the indicatedstop band. Tuning can also be done on site: For frequency
increase/decrease only three self-locking tuning screws needto be adjusted (using a 1.5 mm hex key). Since all three
resonators can be tuned independently, two or three separate
interfering signals can be attenuated or one interfering signalcan be suppressed with very high attenuation by superposing
the stop poles.
For indoor use only.
Tuning examples: f0=1800 MHz f
0=1900 MHz f
0=2000 M
Stop band attenuationat a stop band bandwidth of:at f
0±0.5 MHz >45 dB >50 dB >55 dB
at f0±0.2 MHz >50 dB >55 dB >60 dB
at f0±0.1 MHz >55 dB >60 dB >65 dB
7.5 inches(191 mm)
5.9 inches(149 mm)
2.1 inches(54 mm)
TuningScrews
792 219
Typical Attenuation Curves
(Tuning examples)
Mounting Options:
Description
Mount using four screws (max. 4mm diameter)
Band-Stop Filter
1800–2000 MH
Indoor Use On
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 310/36594
3 dB Coupler
(90° Hybrid)
806–960 MHz
Indoor Use
806–960 MHz 3 dB Couplers
10864-A936.1483/c
Order Information:
Model Description
K637061 3 dB coupler with N female connectors
K637067 3 dB coupler with DIN female connectors
Specifications:
Frequency range 806–960 MHz
VSWR* <1.1:1
Impedance 50 ohms
Attenuation* 1↔2 / 1↔3 3 ±0.4 dB (see diagram I)
Attenuation* 2↔3 See diagram II
Directivity >30 dB
Maximum input power <500 watts total power two inoutswith max. 350 watts at one input
Connector N or 7-16 DIN female
Weight 1.3 lb (0.6 kg)
Dimensions 6.2 x 3.7 x 2.2 inches max.including connectors (157 x 95 x 55 mm)
Shipping dimensions 6.7 x 4.1 x 3.1 inches(170 x 105 x 80 mm)
*VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads.
The 3-dB coupler can be used:
• As a decoupled power spliter with a ratio of 1:1
• For the decoupled combining of two transmitters with a
frequency spacing as narrow as desired (at 3 dB loss)
• For the decouped combining of two receivers with frequencyspacing as narrow as desired
• For the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequencyrange
• As a frequency-independent 90° phase shifter
• As a component to form combiners
Function:
The 3-dB coupler has four ports, two of which are decoupledfrom each other. For example, effective power entering into
port 1 is distributed into ports 2 and 3. Port 4 is decoupled and
without power if ports 2 and 3 are ideally matched. In practicean absorber of suitable power at port 4 is to be planned in
accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonallyopposite ports 2 and 3 or 1 and 4.
For indoor use.
K637061, K637067
Mounting Options:
Description
Mount using two screws (max. 5 mm diameter).
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 311/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 312/36596
Coupler
806–960 MHz
Indoor Use Only
10845-A936.1439/g
4.7, 6, 7, and 10 dB Couplers
Order Information:
Model Description
792 937 4.7 dB coupler with N female connector
792 170 4.7 dB coupler with 7-16 DIN female connector
793 105 6 dB coupler with N female connector
792 180 6 dB coupler with 7-16 DIN female connector
793 106 7 dB coupler with N female connector
793 107 7 dB coupler with 7-16 DIN female connector
793 108 10 dB coupler with N female connector
790 213 10 dB coupler with 7-16 DIN female connector
Specifications:
Frequency range 806–960 MHz
Directivity >27 dB
VSWR* <1.1:1
Impedance 50 ohms
Maximum input power <350 watts total powerConnector N or 7-16 DIN female
Weight 1.3 lb (0.6 kg)
Dimensions 6.2 x 3.7 x 2.2 inches (max.)including connectors (157 x 95 x 55 mm)
Shipping dimensions 11.8 x 4.5 x 2.6 inches(300 x 115 x 65 mm)
The 4.7-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:2 ratio.
For example an effective power entering into port 1 is divided betweenthe ports 2 and 3 at a ratio of 1:2.
Thus 1/3 of the input power (attenuation: 4.7 dB) is available at port 2 and2/3 of the input power is available at port 3.
The 6-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:3 ratio.
For example an effective power entering into port 1 is divided betweenthe ports 2 and 3 at a ratio of 1:3.
Thus 1/4 of the input power (attenuation: 6 dB) is available at port 2 and3/4 of the input power is available at port 3.
The 7-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:4 ratio.
For example an effective power entering into port 1 is divided betweenthe ports 2 and 3 at a ratio of 1:4.
Thus 1/5 of the input power (attenuation: 7 dB) is available at port 2 and4/5 of the input power is available at port 3.
The 10-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:9 ratio.
For example an effective power entering at port 1 is divided between theports 2 and 3 at a ratio of 1:9.
Thus 1/10 of the input power (attenuation: 10 dB) is available at port 2 and9/10 of the input power is available at port 3.
Port 4 is decoupled and remains free of power if the ports 2 and 3 areideally matched. In practice an absorber of suitable power at port 4 is tobe planned in accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonally opposite ports 2and 3 respectively 1 and 4.
4.7 dB Coupler 6 dB Coupler 7 dB Coupler 10 dB Coupler
Attenuation* 1↔3 (4↔2) 1.8 ±0.3 dB 1.25 ±0.2 dB 1.0 ±0.2 dB 0.5 ±0.2 dB
Attenuation* 1↔2 (4↔3) 4.7 ±0.5 dB 6 ±0.5 dB 7 ±0.5 dB 10 ±0.5 dB
*VSWR and attenuation values are measured when the remaining ports are terminated with 50 ohm loads.
Mounting Options:
Description
Mounts using two screws (max. 5.5 mm diameter).
806–960 MHz Couplers
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 313/365
6 and 10 dB Couple
10859-A936.1600/e
Order Information:
Model Description
792 964 6 dB coupler with N female connector
792 965 6 dB coupler with 7-16 DIN female connector
792 966 10 dB coupler with N female connector
792 967 10 dB coupler with 7-16 DIN female connector
Specifications:
Frequency range 800–1900 MHz
VSWR* <1.15:1
Impedance 50 ohms
Maximum input power <350 watts total power two inoutswith max. 250 watts at one input
Connector N or 7-16 DIN female
Weight 1.1 lb (0.5 kg)
Dimensions 5.3 x 3.7 x 1.6 inches (max.)including connectors (135 x 95 x 40 mm)
Shipping dimensions 10.8 x 4.5 x 1.9 inches(275 x 115 x 47 mm)
The 6-dB coupler is used as a decoupled splitter for powersplitting purposes at a 1:3 ratio.
For example an effective power entering into port 1 is dividedbetween the ports 2 and 3 at a ratio of 1:3.
Thus 1/4 of the input power (attenuation: 6 dB) is available at
port 2 and 3/4 of the input power is available at port 3.
The 10-dB coupler is used as a decoupled splitter for powersplitting purposes at a 1:9 ratio.
For example an effective power entering at port 1 is divided
between the ports 2 and 3 at a ratio of 1:9.
Thus 1/10 of the input power (attenuation: 10 dB) is available
at port 2 and 9/10 of the input power is available at port 3.
Port 4 is decoupled and remains free of power if the ports 2 and3 are ideally matched. In practice an absorber of suitable power
at port 4 is to be planned in accordance with the mismatch of
ports 2 and 3.
Decoupled combining can be achieved via the diagonally oppositeports 2 and 3 respectively 1 and 4.
For indoor use only.
6 dB Coupler 10 dB Coupler
Attenuation* 1↔3 (4↔2) 1.5 ±0.5 dB (800–1900 MHz) 0.5 ±0.5 dB (800–1900 MHz)
Attenuation* 1↔2 (4↔3) 6 ±1 dB (800–960 / 1700–1900 MHz) 10 ±1 dB (800–960 / 1700–1900MHz)
6 ±1.5 dB (960–1700 MHz) 10 ±2 dB (960–1700 MHz)
Mounting Options:
Description
Mount using two screws (max. 5.5 mm diameter).
800–1900 MHz Couplers
3 dB Coupler
800–1900 MH
Indoor Use Onl
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 314/36598
3 dB Coupler
(90° Hybrid)
800–2200 MHz
ndoor or Outdoor Use
10862-A936.2235/c
Specifications:
Frequency range 800–2200 MHz
VSWR* <1.2:1
Impedance 50 ohms
Attenuation* 1↔2 / 1↔3 3 ±1.2 dB (see diagram I)
Attenuation* 2↔3 See diagram II
Directivity >20 dB
Maximum input power <300 watts total power two inoutswith max. 200 watts at one input
Intermodulation (2x20w) IM3: -160 dBc
Temperature range -30 to +70° CConnector 7-16 DIN female
Weight 2.9 lb (1.3 kg)
Dimensions 4.1 x 3.7 x 2.1 inchesincluding connectors (105 x 94 x 53 mm)
Shipping dimensions 6.3 x 3.7 x 2.6 inches(160 x 95 x 65 mm)
*VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads.
The 3-dB coupler can be used:
• As a decoupled power spliter with a ratio of 1:1
• For the decoupled combining of two transmitters with a
frequency spacing as narrow as desired (at 3 dB loss)
• For the decouped combining of two receivers with frequencyspacing as narrow as desired
• For the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequencyrange
• As a frequency-independent 90° phase shifter
• As a component to form combiners
Function:
The 3-dB coupler has four ports, two of which are decoupledfrom each other. For example, effective power entering into
port 1 is distributed into ports 2 and 3. Port 4 is decoupled and
without power if ports 2 and 3 are ideally matched. In practicean absorber of suitable power at port 4 is to be planned in
accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonallyopposite ports 2 and 3 or 1 and 4.
For indoor or outdoor use (IP66).
793 554
Mounting Options:
Description
Mount using two screws (max. 5.5 mm diameter).
800–2200 MHz Coupler
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 315/365
10860-A936.2072/b
Specifications:
Frequency range 1700–2200 MHz
VSWR* <1.15:1
Impedance 50 ohms
Attenuation* 1↔2 / 1↔3 3 ±0.4 dB (see diagram I)
Attenuation* 2↔3 See diagram II
Directivity >25 dB
Maximum input power <300 watts total power two inoutswith max. 200 watts at one input
Intermodulation (2x20w) IM3: -160 dBc
Connector 7-16 DIN female
Weight 2.9 lb (1.3 kg)
Dimensions 3.7 x 3.5 x 2.4 inchesincluding connectors (94 x 88 x 60 mm)
Shipping dimensions 6.3 x 3.7 x 2.6 inches(160 x 95 x 65 mm)
*VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads.
The 3-dB coupler can be used:
• As a decoupled power spliter with a ratio of 1:1
• For the decoupled combining of two transmitters with a
frequency spacing as narrow as desired (at 3 dB loss)
• For the decoupled combining of two receivers with frequencyspacing as narrow as desired
• For the decoupled combining of two transmitter/receiver units,
whose integrated duplexers are within the same frequencyrange
• As a frequency-independent 90° phase shifter
• As a component to form combiners
Function:
The 3-dB coupler has four ports, two of which are decoupledfrom each other. For example, effective power entering into
port 1 is distributed into ports 2 and 3. Port 4 is decoupled and
without power if ports 2 and 3 are ideally matched. In practicean absorber of suitable power at port 4 is to be planned in
accordance with the mismatch of ports 2 and 3.
Decoupled combining can be achieved via the diagonallyopposite ports 2 and 3 or 1 and 4.
For indoor or outdoor use (IP66).
Mounting Options:
Description
Mount using two screws (max. 5.5 mm diameter).
3 dB Coupler
1700–2200 MH
Indoor or Outdoor
793 0061700–2200 MHz Coupler
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 316/36500 10863-B936.2425/d
Specifications:
Frequency range 800–2200 MHz
Attenuation*Tx1→Antenna 3 ±1.2 dBTx2→Antenna 3 ±1.2 dBTx1↔Tx2 See diagram
Impedance 50 ohms
VSWR* <1.2:1
Intermodulation (2x20w) IM3: -160 dBc
Maximum input power <150 wattsper Tx port with max. 16 signalsat each port
Connectors 7-16 DIN female
Temperature range -20° to +50° C
Weight 21.6 lb (9.8 kg)
Dimensions 17.5 x 13.2 x 2.5 inches(444 x 336 x 64 mm)
Shipping dimensions 20.1 x 16.1 x 3.9 inches(510 x 410 x 100 mm)
* VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads
The 793 555 3 dB Coupler with Cable Absorber is designedto combine two BTS (Base Tranceiver Stations) onto one
antenna to save feeder cable and antenna costs.
● As opposed to standard absorbers, the 793-555 Cable
Absorber provides excellent intermodulation performance.
● The frequency spacing between transmitter signals can beas small as required.
● DC signals at the Tx1 port are passed to the antenna port.
● DC signals at the Tx2 port are short-circuited.
For indoor use only.
Note:
The 3-dB Coupler with Cable Absorber is designed for a max. inputpower of 150 W per input (in total 300 W). Wall-mounting of thedevice is recommended with the cooling ribs running in a verticaldirection (see photo) in order to dissipate the max. heat power of150 W and not to over-heat the unit.
When installed in a 19˝ rack, it must be ensured that the max. heatpower of 150 W is sufficiently dissipated, so that the ambienttemperature does not rise above +50° C. This can be achievedfor example by the additional installation of a correspondinglydimensioned ventilator in the 19˝ rack or by reducing the maximum
input power.
The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to beexceeded.
Mounting Options:
Description
Wall mount using four screws (max. 7mm dia.).
19 inch rack mount on pre-installed 19 inch sliding bars (2 heightunits required).
793 555
3 dB Couplerwith
Cable Absorber
800–2200 MHz
Indoor Use Only
800–2200 MHz Coupler with Cable Absorber
13.2 inches(336 mm)
2.5 inches(64 mm)
17.5 inches(444 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 317/365
792 702
10858-B936.1941/c
Specifications:
Frequency range 1700–2200 MHz
Attenuation*Tx1→Antenna 3 ±0.4 dBTx2→Antenna 3 ±0.4 dBTx1↔Tx2 See diagram
Impedance 50 ohms
VSWR* <1.15:1
Intermodulation (2x20w) IM3: -160 dBcMaximum input power <150 watts
per Tx port with max. 16 signalsat each port
Connectors 7-16 DIN female
Temperature range -20° to +50° C
Weight 21.6 lb (9.8 kg)
Dimensions 17.5 x 13.2 x 2.5 inches(444 x 336 x 64 mm)
Shipping dimensions 20.1 x 16.1 x 3.9 inches(510 x 410 x 100 mm)
* VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads
The 792 702 3 dB Coupler with Cable Absorber is designedto combine two BTS (Base Tranceiver Stations) onto one
antenna to save feeder cable and antenna costs.
● As opposed to standard absorbers, the 792-702 Cable
Absorber provides excellent intermodulation performance.
● The frequency spacing between transmitter signals can be assmall as required.
● DC signals at the Tx1 port are passed to the antenna port.
● DC signals at the Tx2 port are short-circuited.
For indoor use only.
Note:
The 3-dB Coupler with Cable Absorber is designed for a max. inputpower of 100 W per input (in total 200 W). Wall-mounting of the deviceis recommended with the cooling ribs running in a vertical direction(see photo) in order to dissipate the max. heat power of 100 W andnot to over-heat the unit.
When installed in a 19˝ rack, it must be ensured that the max. heat powerof 100 W is sufficiently dissipated, so that the ambient temperaturedoes not rise above +50° C. This can be achieved for example by theadditional installation of a correspondingly dimensioned ventilator inthe 19˝ rack or by reducing the maximum input power.
The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to beexceeded.
Mounting Options:
Description
Wall mount using four screws (max. 7mm dia.).
19 inch rack mount on pre-installed 19 inch sliding bars(2 height units required).
3 dB Coupler
with Cable Abso
1700–2200 MH
Indoor Use Onl
1700–2200 MHz Coupler with Cable Absorber
13.2 inches(336 mm)
2.5 inches
(64 mm)
13.2 inches(336 mm)
2.5 inches(64 mm)
17.5 inches(444 mm)
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 318/36502 10548-A936.1419/b
Specifications:
Frequency range 806–960 MHz
Power slitting ratio 728-044 1:3729-812 1:4
Power dividing loss 728-044 <5.5 dB (including insertion loss)729-812 <6.5 dB (including insertion loss)
Impedance 50 ohms
VSWR* < 1.2:1
Maximum input power <100 watts (each input)
Connector N female
Isolation >25 dB
Weight 728-044 1.1 lb (0.5 kg)729-812 1.54 lb (0.7 kg)
Dimensions 728-044 5.5 x 2.9 x 2.7 inches(140 x 74 x 68 mm)
729-812 5.5 x 4.5 x 2.7 inches(140 x 114 x 68 mm)
* VSWR is measured when the remaining ports are terminated with 50 Ω loads.
The 728 044 and 729 812 decoupled power spitters can be used:
● For power distribution, e.g. from one common antenna to several
receivers with frequency spacing as narrow as desired.
● For power distribution, for example: from one transmitter to severaloutputs.
● For the decoupled combining of several transmitters with frequency
spacing as narrow as desired (at 4.7 dB or 6 dB loss).
● For the decoupled combining of two transmitting/receiving units,whose integrated duplexers are within the same frequency range.
Function: The decoupled 3:1 power splitter has 3 inputs, oneoutput, and 3 absorber ports. The decoupled 4:1 power splitter
has 4 inputs, one output, and 4 absorber ports. The inputs are onlydecoupled if the absorber ports are terminated with 50Ω loads of
suitable power.
Di m ens i on i ng the absorber : The abso rbe rs o f
the 3:1 power splitter must be dimensioned so that atleast 2 ⁄ 3 of the power fed into the inputs can be absorbed.
Example: If a power of 50 watts is fed into every input, thenthe absorbers must be able to absorb 33 watts each.
The absorbers of the 4:1 power splitter must be dimensioned so
that at least 3 ⁄ 4 of the power fed into the inputs can be absorbed.
Example: If a power of 50 watts is fed into every input, thenthe absorbers must be able to absorb 37 watts each.
Order Information:
Model Description
728-044 Decoupled power spitter 1:3
729-812 Decoupled power spitter 1:4
Mounting Options:
Description
Mount using two screws (4 mm maximum).
28 044, 729 812
Decoupled
Power Splitter
806–960 MHz
806–960 MHz Decoupled Power Splitters
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 319/365
10548-B936.1435/a
Specifications: K6373621 790 881 791 498
Frequency range 806–960 MHz 890–960 MHz 1710–1880 MHz
Attenuation* 1↔2 or 1↔4 3±0.4 dB 3±0.3 dB 3±0.4 dBSee diagram 1 See diagram 1 See diagram 1
Attenuation* 1↔3 or 2↔4 See diagram 2 See diagram 2 See diagram 2
Impedance 50 ohms 50 ohms 50 ohms
VSWR* < 1.2:1 < 1.2:1 < 1.3:1
Maximum input power 100 watts (each input) 100 watts (each input) 50 watts (each input)
Connector N female N female N female
Weight 0.71 lb (0.32 kg) 0.71 lb (0.32 kg) 0.55 lb (0.25 kg)
Dimensions 5.9 x 3.4 x 1.2 inches 5.9 x 3.4 x 1.2 inches 4.2 x 3.1 x 1 inch(150 x 87 x 30 mm) (150 x 87 x 30 mm) (106 x 80 x 26 mm)
* Attenuation and VSWR are measured when the remaining ports are terminated with 50 Ω loads.
The hybrid ring junction can be used:
● As a power splitter with a 1:1 ratio.
● For the decoupled combining of two transmitters withfrequency spacing as narrow as desired (at 3 dB loss).
● For the decoupled combining of two receivers with frequency
spacing as narrow as desired.
● For the decoupled combining of two transmitter/receiverunits whose integrated duplexers are within the samefrequency range.
● As a component to form combiners.
Function: The hybrid ring junction has four ports, two of which
are decoupled from each other. For example, effective powerentering port 1 is distributed into ports 2 and 4. Port 3 is
decoupled and without power if ports 2 and 4 are ideally
matched. In practice an absorber of suitable power at port 3is to be planned in accordance with the mismatch of ports
2 and 4. Decoupled combining can be achieved via ports 1and 3, or ports 2 and 4.
Order Information:
Model Description
K6373621 Hybrid ring junction (806–960 MHz)
790 881 Hybrid ring junction (890–960 MHz)
791 498 Hybrid ring junction (1710–1880 MHz)
K6373621790 881
791 498
Mounting Options:
Description K6373621 790 881 791 498
Mounting Mounts with two screws. Mounts with two screws. Mounts with four screws.
K6373621, 790 881, 791 4
Hybrid Ring Junc
806–960 MHz1710 MHz–1880
Hybrid Ring Junction
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 320/36504
K6373621
790 881
790-498
Typical Attenuation Curves
K6373621, 790 881, 791 498 Hybrid Ring Junction
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 321/365
10471-C936.131/i
50 Ohm RF Loads
Kathrein RF loads are manufactured to the most exactingstandards and are highlighted by the following features:
● excellent impedance match over a wide frequency range
● loads 10 watts and larger provide a high degree of RF shielding
and stability due to the aluminum enclosure
● convection cooling permits installation in any attitude
●
50 and 100 watt units can be panel mounted to further aidequipment cooling
● 1.5 watt model IP rated IP65 for outdoor use, all other modelsfor indoor use only K6226111
T50MN/2
50 OHM RF LOARF Loads
K6226301T50FN/50
K6226501T50FN/100
K6226201
T50FN/25
K6226401
T50FN/10
784 10367T50M7/1.5
Specifications:
Power FrequencyRating* Range VSWR Connector Dimensions Weight Model
0.5 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 1.3 in. long, 0.8 in. diameter 0.09 lb K6226611<1.15:1 (1000–2000 MHz) 33 mm long, 21 mm diameter 0.04 kg T50MN/0.5<1.2:1 (2000–2700 MHz)
1.5 watt 0–4000 MHz <1.1:1 (0–2000 MHz) 7-16 male 1.6 in. long, 1.3 in. diameter 0.27 lb 784 10367<1.3:1 (2000–4000 MHz) 40 mm long, 32 mm diameter 0.12 kg T50M7/1.5
7-16 female 1.6 in. long, 1.1 in. diameter 0.27 lb 784 1047040 mm long, 29 mm diameter 0.12 kg
2 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 1.3 in. long, 0.8 in. diameter 0.09 lb K6226111<1.15:1 (1000–2000 MHz) 33 mm long, 21 mm diameter 0.04 kg T50MN/2<1.2:1 (2000–2700 MHz)
10 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 3.3 x 3.2 x 1.6 inches** 0.55 lb K6226411<1.15:1 (1000–2000 MHz) 85 x 82 x 40 mm** 0.25 kg T50MN/10
<1.2:1 (2000–2700 MHz) N female 3.2 x 3 x 1.6 inches** 0.55 lb K622640182 x 77 x 40 mm** 0.25 kg T50FN/10
25 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 4.8 x 3.7 x 1.4 inches** 1.1 lb K6226211<1.15:1 (1000–2000 MHz) 121 x 94 x 35 mm** 0.5 kg T50MN/25
<1.2:1 (2000–2700 MHz) N female 4.4 x 3.7 x 1.4 inches** 1.1 lb K6226201113 x 94 x 35 mm** 0.5 kg T50FN/25
7-16 male 4.9 x 1.4 x 3.7 inches** 1.1 lb K6226217124 x 94 x 35 mm** 0.5 kg T50M7/25
7-16 female 4.9 x 3.7 x 1.4 inches** 1.1 lb K6226207125 x 94 x 35 mm** 0.5 kg T50F7/25
50 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 5.4 x 3.5 x 2.6 inches** 1.8 lb K6226311<1.15:1 (1000–2000 MHz) 138 x 90 x 67 mm** 0.8 kg T50MN/50
<1.2:1 (2000–2700 MHz) N female 5.1 x 3.5 x 2.6 inches** 1.8 lb K6226301130 x 90 x 67 mm** 0.8 kg T50FN/50
7-16 male 5.2 x 3.5 x 2.6 inches** 1.8 lb K6226317133 x 90 x 67 mm** 0.8 kg T50M7/50
7-16 female 5.3 x 3.5 x 2.6 inches** 1.8 lb K6226307134 x 90 x 67 mm** 0.8 kg T50F7/50
100 watt 0–1000 MHz <1.08:1 N male 6.3 x 6.1 x 4.5 inches** 5.3 lb K6226511161 x 156 x 114 mm** 2.4 kg T50MN/100
N female 6.1 x 6 x 4.5 inches** 5.3 lb K6226501156 x 153 x 114 mm** 2.4 kg T50FN/100
7-16 female 6.7 x 6.1 x 4.5 inches** 5.3 lb K6226507170 x 156 x 114 mm** 2.4 kg T50F7/100
* Power rating at 40°C ambient temperature. ** Includes connector lengthThe maximum power rating increases or decreases
with falling or rising ambient temperature.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 322/36506
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 323/365
Mechanical Accessories
M ounting Configurations 806 - 960 MHz Panels ................................................................................................................................................................309 1425 - 2700 MHz Panels.......................................................................................................................................................310
M ounting Kit Options for Panel Antennas 1 x 738 546 ..........................................................................................................................................................................................................311 2 x 738 546 ..........................................................................................................................................................................................................311 3 x 738 546 ..........................................................................................................................................................................................................311 1 x 131 1847 .....................................................................................................................................................................................................311
2 x 131 1847 .....................................................................................................................................................................................................311 850 10002...............................................................................................................................................................................................................311 850 10003...............................................................................................................................................................................................................311
Tilt Kit Options for Panel Antennas 840 90013...............................................................................................................................................................................................................312 850 10007...............................................................................................................................................................................................................312 850 10013...............................................................................................................................................................................................................312
3-Sector Panel Mounting Brackets 742 033.........................................................................................................................................................................................................................314 742 034.........................................................................................................................................................................................................................314 742 263.........................................................................................................................................................................................................................315
Dimensions of Panel Profiles .......................................................................................................................................................316
3-Sector DTMA Mounting Brackets 782 10347, 782 10348, 782 10349 ................................................................................................................319
D ual Panel Mounting Kit 742 113.........................................................................................................................................................................................................................320 850 10006...............................................................................................................................................................................................................321 2 x 850 10002 ................................................................................................................................................................................................321 2 x 850 10003 ................................................................................................................................................................................................321
M ounting Kit Options for Omni & Directional Antennas Mounting Matrix .........................................................................................................................................................................................322 MKPP-23...................................................................................................................................................................................................................323 MKPS-1........................................................................................................................................................................................................................323 MKPS-2........................................................................................................................................................................................................................323 MKPS-3........................................................................................................................................................................................................................323
MKPS-4........................................................................................................................................................................................................................323MKPS-5........................................................................................................................................................................................................................323MKPS-13...................................................................................................................................................................................................................323
MKPX-2........................................................................................................................................................................................................................323 MKPX-3........................................................................................................................................................................................................................324
MKPX-4........................................................................................................................................................................................................................324MKPX-5........................................................................................................................................................................................................................324MKPX-6........................................................................................................................................................................................................................324
MKPX-9........................................................................................................................................................................................................................323MKPX-10...................................................................................................................................................................................................................324MKPX-11...................................................................................................................................................................................................................324MKPX-12...................................................................................................................................................................................................................324
Tilt Kit Options for Omni & Directional Antennas MKTB-1 .......................................................................................................................................................................................................................324
MKTB-3 .......................................................................................................................................................................................................................324Azimuth Adjustment Kit for Panel Antennas
850 10014 ..............................................................................................................................................................................................................325 850 10015 ..............................................................................................................................................................................................................325 850 10016 ..............................................................................................................................................................................................................325 850 10017 ..............................................................................................................................................................................................................325
307
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 324/365
Selecting the right mounting hardware is painless with the
broad selection of clamps, bands, tilt kits, and specialty items
needed to securely and correctly install Kathrein antennas.
308
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 325/365
Mounting Configurations for Panel Antennas 806–960 MH
Mechanical TiltStandard Mount
Mounting for 2 to 4.6 inch(50 to 115 mm) OD mast
Sector Mount
Mounting for 2.375 to 6 inch(60 to 152 mm) OD mast
Using 1 x 738 546, 2 x 738 546, 3 x 738 546mounting kits.
Using 742 033, 742 263, 742 034 mounting kits.
Using 850 10013 and 737 976 tilt mount kits.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 326/36510
Mounting Configurations for Panel Antennas1425–2700 MHz
Standard Panel Large Panel
(optional mounting
for any PCS panel)
Standard Tilt
Using 2 x 131 1847 mounting kit. Using 2 x 738 546 mounting kit.
Using 850 10013 tilt mount kit.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 327/365
Mounting Kit Options for Panel Antennas
1 x 738 546 2 x 738 546 3 x 738 546
850 10002850 10003
1 x 131 1847 2 x 131 1847
2 x 738 546*
3 x 738 546*
for use with most 3-point mount panel antennas
ships in sets of 3 bracketsMast dia. 2–4.5 inches (50–115 mm)
Weight 6 lb (2.7 kg)
for use with 2-point mount panel antennas> 48 inches (1219 mm) long
ships in sets of 2 brackets
Mast dia. 2–4.5 inches (50–115 mm)Weight 4 lb (1.8 kg)
1 x 738 546*
for use with most 1-point mount Cellular
panel antennas
Mast dia. 2–4.5 inches (50–115 mm)Weight 2 lb (0.9 kg)
2 x 131 1847for use with 2-point mount PCS panel antennas<48 inches (1219 mm) long
and accessories
Mast dia. 2–5.7 inches (50–145 mm)
1 x 131 1847for use with 1-point mount PCS panel antennas
<48 inches (1219 mm) longand accessories
Mast dia. 2–5.7 inches (50–145 mm)
Mounting Ki
* 850 10002 Mounting clamp for 4.3–8.7 inch(110–220 mm) OD steel mast
11.9 lb (5.4 kg).
* 850 10003 Mounting clamp for 8.3–15 inch(210–380 mm) OD steel mast.
21.2 lb (9.6 kg).
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 328/36512 10884-A
850 10013for use with 2-point mount panel antennas> 48 inches (1219 mm) long
Note: 3-point point panel antennas require an
additional 840 90013 bracket
64 mmM8
64 mmM8
850 10007for use with 2-point mount
Cellular and Dualband panel antennas
from 55–110 lb (25–50 kg)
Tilt Kit Options for Panel Antennas
850 10013
840 90013
850 10007
Tilt Mount Kits
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 329/365
Model Description
850 10013 Locking Tilt Mount Kit for use with 2-point mount50.9–51 inch (1294–1296 mm) panel antennas, 0–15 degrees downtilt angle76–76.3 inch (1930–1936 mm) panel antennas, 0–11 degrees downtilt angle101.6 inch (2580 mm) panel antennas, 0–8 degrees downtilt angle
Weight 7.4 lb (3.7 kg)
Material Hot-dip galvanized steel
Fasteners Stainless steel
840 90013 Locking Tilt Mount Bracket for use with 850 10013 to change from 2-point to 3-point mount
Weight 5.1 lb (2.3 kg)
Material Hot-dip galvanized steel
Fasteners Stainless steel
850 10007 Heavy-duty Tilt Mount Kit for use with 2-point mount panel antennas 55–110 lb (25–50 kg)downtilt angle dependent on antenna length.
Weight 13 lb (5.9 kg)
Material Hot-dip galvanized steel
Fasteners Stainless steel
Tilt Kit Options for Panel Antennas
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 330/36514
3 Sector Panel Mounting Brackets742 033, 742 034
Dimensions:742 033 A B C D E F Dout
inches 4.5 3.5 8.5 8.2 1.9 1.8 18.1mm 114.3 88 217 207 49 45 460
742 034 A B C D E F Dout
inches 5.5 3.9 9.3 9 1.9 1.8 19mm 139.7 100 236 228 49 45 482
Specifications:
Angle between antennas 120°
Suitable for mast diameter*742 033 4.5 inches (114.3 mm) OD.742 034 5.5 inches (139.7 mm) OD.
Number of pieces 2 x 3 sector clamp2 x mounting support clamp
Materials3 sector clamp Hot-dip galvanized steelMounting support clamp AluminumFasteners Stainless steel
Outer diameter (Dout) of the 3 A-Panel Arrangement742 033 18.1 inches (460 mm)742 034 19 inches (482 mm)
* Customer assumes all responsibility to ensure that the mounting pipe isadequate to support the intended load. For use with steel pipe only (notaluminum) with a minimum 0.25 inch (6 mm) wall thickness.
Dout
A
Torque: 5.9 ft-lb (8 Nm)
B
C
D
60°
Mounting support clamp
E
F
3 sector clamp
(supports the antenna assembly
during azimuth adjustment)
• Slim and unobtrusive design.
• Nearly cylindrical optical appearance with a small outer diameter.
• All components can be ordered separately (antennas or clamps).
• Mounting support clamp that holds the antenna assembly in vertical position for safe
and easy azimuth adjustment.
• Suitable for all A-Panels with a width of 10–10.4 inches (254–262 mm).
Order Information:
Model Description
742 033 Three-panel Sector Mounting Kit(120 deg. ea.) for 4.5 inch(114.3 mm) OD steel mast.
742 034 Three-panel Sector Mounting Kit(120 deg. ea.) for 5.5 inch(139.7 mm) OD steel mast.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 331/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 332/36516
Dimensions of Panel Profiles
5.39 inches(137 mm)
10.63 inches(270 mm)
PA1
6.34 inches(161 mm)
10.63 inches(270 mm)
PA2
10.63 inches(270 mm)
6.73 inches(171 mm)PA3
5.04 inches(128 mm)
10.51 inches(267 mm)
PC1
4.33 inches(110 mm)
10.2 inches(259 mm)
PC2
Note: The dimensions listed here show themaximum outside dimensions includingmounting brackets, end caps, etc. andtherefore may not match dimensionsshown on individual data sheets.
12.13 inches(308 mm)
6.93 inches(176 mm)PA4
10.59 inches
(269 mm)
6.65 inches(169 mm)PA5
4.49 inches(114 mm)
11.93 inches(303 mm)
PC3
4.49 inches(114 mm)
10.2 inches(259 mm)
PC4
10926-E
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 333/365
6.42 inches(163 mm)
1.97 inches(50 mm)
PF1
2.52 inches(64 mm)
6.42 inches(163 mm)
PF2
3.11 inches(79 mm)
10.63 inches(270 mm)
PF3
2.52 inches(64 mm)
6.42 inches(163 mm)
PF4
3.27 inches(83 mm)
6.38 inches(162 mm)
PF5
8.11 inches(206 mm)
3.47 inches(88 mm)PF6
3.54 inches(90 mm)
12.05 inches(306 mm)
PF7
3.82 inches(97 mm)
12.99 inches
(330 mm)
PF8
3.82 inches(97 mm)
6.1 inches(155 mm)
PF9
Dimensions of Panel Profi
3.43 inches(87 mm)
6.1 inches(155 mm)
PF10
4.25 inches(108 mm)
6.1 inches(155 mm)
PF11
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 334/365
Dimensions of Panel Profiles
742 033 and 742 034Dout
5 4 +
5 4
Ð
5 4 +
5 4
Ð
+ 4 5 Ð 4 5
742 263 Dout
Note: The dimensions listed here show the maximum outside dimensions including mounting brackets, end caps, etc.and therefore may not match dimensions shown on individual data sheets.
Dout Dout Dout742 263 742 033 742 034
Profile Width Depth Mast dia. 3.5" (88.9 mm) 4.5" (114.3 mm) 5.5" (139.7 mm)
PA1 10.63 inches 5.39 inches Not 18.1 inches 19 inches(270 mm) (137 mm) Recommended (460 mm) (483 mm)
PA2 10.63 inches 6.34 inches Not 20 inches 21 inches(270 mm) (161 mm) Recommended (508 mm) (533 mm)
PA3 10.63 inches 6.73 inches Not 21 inches 21.9 inches
(270 mm) (171 mm) Recommended (533 mm) (556 mm)PA4 12.13 inches 6.93 inches Not 22 inches 23 inches
(308 mm) (176 mm) Recommended (559 mm) (584 mm)
PA5 10.59 inches 6.65 inches Not 21 inches 22 inches(269 mm) (169 mm) Recommended (533 mm) (559 mm)
PC1 10.51 inches 5.04 inches Not 18.5 inches 19.4 inches(267 mm) (121 mm) Recommended (470 mm) (493 mm)
PC2 10.2 inches 4.33 inches Not 17.7 inches 18.3 inches(259 mm) (110 mm) Recommended (450 mm) (465 mm)
PC3 11.93 inches 4.49 inches Not 19 inches 19.8 inches(303 mm) (114 mm) Recommended (483 mm) (502 mm)
PC4 10.4 inches 4.49 inches Not 18.5 inches 19 inches(255 mm) (114 mm) Recommended (470 mm) (483 mm)
PF1 6.42 inches 1.97 inches 10.2 inches 12 inches 13 inches(163 mm) (50 mm) (259 mm) (305 mm) (330 mm)
PF2 6.42 inches 2.52 inches 10.2 inches 12.25 inches 13.25 inches(163 mm) (64 mm) (259 mm) (311 mm) (337 mm)
PF3 10.63 inches 3.11 inches 13.7 inches 15.5 inches 16 inches(270 mm) (79 mm) (348 mm) (394 mm) (406 mm)
PF4 6.42 inches 2.52 inches 12 inches 13.75 inches 14.5 inches(163 mm) (64 mm) (305 mm) (349 mm) (368 mm)
PF5 6.38 inches 3.27 inches 12.5 inches 14.5 inches 15.5 inches(162 mm) (83 mm) (318 mm) (368 mm) (394 mm)
PF6 8.11 inches 3.47 inches 13.7 inches 15.5 inches 16.3 inches(206 mm) (88 mm) (348 mm) (393 mm) (414 mm)
PF7 12.05 inches 3.54 inches NA 17.1 inches 18 inches(306 mm) (90 mm) (434 mm) (457 mm)
PF8 12.99 inches 3.82 inches NA 17.7 inches 18.4 inches(330 mm) (97 mm) (450 mm) (467 mm)
PF9 6.1 inches 3.82 inches 14.2 inches 15.7 inches 16.7 inches(155 mm) (97 mm) (360 mm) (399 mm) (424 mm)
PF10 6.1 inches 3.43 inches 12.75 inches 14.8 inches 15.7 inches(155 mm) (87 mm) (324 mm) (375 mm) (400 mm)
PF11 6.1 inches 4.25 inches 14.5 inches 16.3 inches 17.3 inches(155 mm) (108 mm) (368 mm) (413 mm) (439 mm)
For antennas with rear facing connectors contact Kathrein Scala Division Sales Engineering to verifycompatibility with sector mount brackets.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 335/365
Bottom view
Lower Clamp
Upper Clamp
3 Sector DTMA Mounting Brackets 782 10347, 782 10348, 782 1034
Dimensions:782 10347 A B C D Dout
inches 3.5 2.8 6.7 7.7 14.2
mm 88.9 70 170 196 360
782 10348 A B C D Dout
inches 4.5 3.3 7.5 8.6 15.4mm 114.3 83 190 219 390
782 10349 A B C D Dout
inches 5.5 3.7 8.7 8.9 16.3mm 139.7 95 221 225 415
Specifications:
Angle between DTMAs 120°
Suitable for mast diameter*782 10347 3.5 inches (88.9 mm) OD.782 10348 4.5 inches (114.3 mm) OD.782 10349 5.5 inches (139.7 mm) OD.
Number of pieces 2 x 3 sector clamp
Materials3 sector clamp Stainless steelFasteners Stainless steel
Outer diameter (Dout) of the 3 DTMA Arrangement782 10347 14.2 inches (360 mm)782 10348 15.4 inches (390 mm)782 10349 16.3 inches (415 mm)
Weight (includes both upper and lower clamp)782 10347 4.2 lbs (1.9 kg)782 10348 4.4 lbs (2 kg)782 10349 5.3 lbs (2.4 kg)
Dout
A
Torque: 12.5–14.8 ft-lb(17–20 Nm)
60°
• Slim and unobtrusive design.
• Nearly cylindrical optical appearance with a small outer diameter.
Order Information:
Model Description
782 10347 Three DTMA Sector Mounting Kit(120 deg. ea.) for 3.5 inch(88.9 mm) OD steel mast.
782 10348 Three DTMA Sector Mounting Kit(120 deg. ea.) for 4.5 inch(139.7 mm) OD steel mast.
782 10349 Three DTMA Sector Mounting Kit(120 deg. ea.) for 5.5 inch
(139.7 mm) OD steel mast.
Torque: 8.9–11.1 ft-lb
(12–15 Nm)
D
C
B
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 336/36520
Configuration
without mechanical downtilt
Configuration
with mechanical downtilt
Dual Panel Mounting Kit742 113
The 742 113 Dual Panel Mounting Kit consists of two hot-dipgalvanized mounting plates and necessary fasteners. It is used to
mount two 65° or 90° panel antennas side by side.
Specifications:
Number of mounting plates 2Antenna length 79 inches (2000 mm) maximum
width 6.1 inches (155 mm) maximum
Material hot-dip galvanized steel
Weight 3.5 lb (1.6 kg)
Dimensions 10.6 x 6.1 x 0.4 inches (270 x 116 x 10 mm)
Mounting Mounts using the supplied fasteners
6.1 inches
(116 mm)
10.6 inches(270 mm)
Order Information:
Model Description
742 113 Dual Panel Mounting Kit
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 337/36511201-A
936.2432/a
Dual Panel Mounting Kit
The 850 10006 Dual Panel Mounting Kit consists of two hot-dip
galvanized mounting plates and necessary fasteners. It is used to mount
panels with a maximum width of 10.3 inches (262 mm) and less than 55lb (25 kg) each.
Specifications:
Number of mounting plates 2
Antenna length 102.4 inches (2600 mm) maximumwidth 10.3 inches (262 mm) maximum
Material clamp Hot-dip galvanized steelfasteners Stainless steel
Weight 7.3 lb (3.3 kg)
Dimensions 15.4 x 2.9 x 1.3 inches (390 x 73 x 34 mm)
Mounting Mounts using the supplied fasteners.Requires 2 x 850 10002 or 2 x 850 10003mounting clamp listed below.
Recommended torque for M8 bolted connections: 8.8 Lb-Ft (12 Nm)
850 10006, 850 10002, 850 1000
390±1
72±0.3
64±0.3 64±0.264±0.2
280±0.5
34
7 3
R 1 0
9
0 – 0 . 5
Ø 9
+ 1
0
Order Information:
Model Description
850 10006 Dual panel mounting kit
2 x 850 10002 Mounting clamp for 4.3–8.7 inch(110–220 mm) OD steel mast11.9 lb (5.4 kg).
2 x 850 10003 Mounting clamp for 8.3–15 inch(210–380 mm) OD steel mast.21.2 lb (9.6 kg).
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 338/36522
Mounting Kit Options for Omni & Directional Antennas
* Requires 2 each MKPX-2
*
*
*
*
*
*
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 339/365
Mounting KiMounting Kit Options for Omni & Directional Antennas
MKPX-9
MKPX-2
MKPP-23MKPS-1, MKPS-2, MKPS-3,MKPS-4, MKPS-5
MKPS-13
MKPP-23
MKPS-1, MKPS-2
MKPS-3, MKPS-4MKPS-5, MKPS-1
MKPX-2, MKPX-9
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 340/36524
Tilt Mount Kits Tilt Kit Options for Omni & Directional Antennas
MKTB-3*
MKTB-1
MKTB-1
MKTB-3
* Phantom mast attachmentbracket shown is par t of theassociated yagi antenna
MKPX-3, MKPX-4,MKPX-5, MKPX-6
MKPX-10MKPX-11, MKPX-12
KPX-3, MKPX-4,KPX-5, MKPX-6,KPX-10, MKPX-11,
KPX-12
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 341/365
Panel Antenna Azimuth Adjustment Kit 850 10014, 850 100
Specifications: 850 10014 850 10015 850 10016 850 10017
Mounting surface Mast Mast Wall Wall
Number of brackets 2 2 2 2
Distance between bolts (A) 2.5 inches 2.8 inches 2.5 inches 2.8 inches(64 mm) (72 mm) (64 mm) (72 mm)
Angular range ±30° ±30° ±30° ±30°
Weight 1.2 lbs 1.5 lbs 2.3 lbs 2.6 lbs(0.55 kg) (0.7 kg) (1.05 kg) (1.2 kg)
Max. permissable static load per kitX direction 2150 N 5100 N 2150 N 5100 NY direction 760 N 1350 N 760 N 1350 N
Supplied mounting hardware Antenna mounting hardware included Antenna mounting hardware includedWall mounting hardware not included
850 10016, 850 100
Y
X
gnitnuomllaWgnitnuomeloP
• Hot-dip galvanized with stainless steel nuts.
A
Recommended torque for all fasteners: 14.75 ft-lb (20 Nm)
11106-A936.3037
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 342/36526
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 343/365
Technical Information
Advanced X-POL Antenna Standards .................................... 332
Calculating Downtilt ................................................................ 331
Calculating HPBW Touchdown Point ...................................... 333
Comparison of Mechanical and Electrical Downtilt ............................................................. 334
Directional Antennas In Front of Reflecting Surfaces .......................................................... 337
Dual Polarized Base Station Antennas For Polarization Diversity System ........................................... 329
Engineering Reference - Equations ....................................... 340
Formula For Estimating Gain For A Standard Directional Dipole Array Using The E & H Plane Patterns ....................................................... 331
Glossary ................................................................................. 344
Isolation Between Dipoles ...................................................... 339
Model Number Cross Reference ............................................ iii
Panel Antenna Test Specifications ......................................... xiv
Radiation Patterns for Side-mounted Omni Antennas ........... 336
Signal Distribution of Power Splitters ..................................... 335
Signal Distribution of Power Taps ........................................... 335
Wind Survival Rating .............................................................. 333
327
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 344/365
I N F O R M A T I O N
328
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 345/365
2 λ
6–9 λ 6–9 λ
Technical Information
The space diversity antenna configuration certainly provides
good electrical results, but the number of antennas required is a
negative factor with regard to the resulting optical appearance, the
increased space requirements and the greater amount of mechani-
cal hardware and feeder cables needed.
In view of the difficulties getting construction permits from the
authorities concerned and approval from property owners for
the installation of antenna systems, an advanced system with a
low-level optical impact had to be found.
Dual Polarized Base Station Antennas ForPolarization Diversity Systems
It is well known that in a cellular network, mobile phones have
considerably lower transmittal power than the transmitters of the
base stations. This means that the transmission from the mobile
phone to the base station (uplink) is much more unfavorable in
relation to the transmission from the base station to the mobile
phone (downlink). To compensate this, a way of improving thequality of reception at base stations had to be found.
Due to the multi-path signal propagation of radio signals, which
occurs in urban areas, so called Space Diversity Reception has
been introduced which provides the best results in the field.
Space Diversity Reception is based on the following
idea:
The signal transmitted by a mobile phone is reflected in the propa-
gation field and reaches the base station via different paths and
phase angles. As a result, the signal at the base station receiving
antenna is the sum or various vectors with different amplitudes,
phases and polarizations. If two receiving antennas are separated
horizontally from each other, (preferable to vertical separation),
then it is highly likely that one of them will provide the required
signal strength (principle of uncorrelated signals). A logic unit
ensures that the higher signal level of the two receiving antennas
is fed into the receiving systems.
Depending on the characteristics in the propagation area, the use
of a Space Diversity Receiving System will produce a diversity
gain of 3 to 5 dB, as compared to using only one single receiving
antenna.
Dual Polarized Base Station Antennas ForPolarization Diversity Systems (cont)
Extensive investigations and trials have shown that so-called
larization diversity Reception is equivalent to or almost equiv
to Space Diversity Reception. Polarization Diversity Rece
means that the reception levels of two orthogonally pola
antennas are compared and then the stronger signal is led t
receiver.
The clear development objective was to design dual-pola
antennas that have the same outer dimensions as single pola
antennas and with equivalent gain figures and radiation patt
The number of individual antennas can thereby be consider
reduced, resulting in improved optical appearance, reduced s
requirements and with less mechanical hardware.
It can generally be said, that the isolation between neighbo
transmitting antennas, as well as between a transmit and a re
antenna must amount to at least 30 dB in order to avoid:
● interfering intermodulation products
● blocking of the receivers
Fig. 1: Sector antenna system using Space Diversity
Reception - 3 antennas, 3 feeders
Rx1
Tx Rx2
Fig. 2: Sector antenna system with Polarization Divers
Reception - 2 antennas, 3 feeders
Tx Rx1
+ Rx2
Tx1
Fig. 3: Sector antenna system with Polarization Diversi
Reception using a duplex filter
1 antenna, 3 feeders, 1 duplexer
Duplexer
Rx1
Rx2
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 346/36530
Technical Information
solation figures for various antenna arrangements are available
rom Kathrein Scala Division.
Radiation patterns and half power beam widths ofX-pol antennas:
Vertically or horizontally polarized antennas show constant po-
arization regardless of the azimuth angle from which the antenna
s observed.
However the polarization of a 45° polarized antenna is not always
45°, it varies with the azimuth angle.
Dual Polarized Base Station Antennas ForPolarization Diversity Systems (cont)
Fig. 4: X-polarized antenna for 2 transmitting and
2 receiving channels
1 antenna, 2 feeders, 2 duplexers
● the activation of the transmitter’s VSWR monitoring system
by an adjacent transmitter
This requirement for 30 dB isolation also applies to dual-polar-
zed antennas. Initially dual-polarized antennas with horizontal
and vertical polarization were preferred since this antenna con-cept easily provides the required 30 dB isolation figure between
the horizontally polarized system and the vertically polarized
system.
Practical results with horizontal / vertical dual-polarized antennas
are fairly positive. However, there is also a weakness.
Since the mobile antennas (i.e. on cars or mobile phones) mainly
operate in a vertically polarized mode, the propagation efficiency
s more favorable to the vertical system of a horizontal/vertical
dual-polarized base station antenna than to the horizontal system.
Thus horizontal polarization is not really suitable for transmit-
ting purposes.
However, with +45°/-45° dual-polarization antennas, both sys-
tems are equivalent with respect to their propagation efficiency.
The two systems can therefore be used with good results for
transmit and receive applications. Furthermore, this antenna
concept allows simultaneous transmission from two transmitters
without the use of a transmitter combiner.
Dual Polarized Base Station Antennas ForPolarization Diversity Systems (cont)
Fig. 5: Varying polarization of a dipole set at a slant of
45°
The vector of the radiated electrical field strength
is fully described by a pair of orthogonal vector
components; in other words, the vector is described
by a rectangular coordinate system.
According to Fig. 6, any field strength vector can be describedeither by a coordinate system, defined by the E
v- vector and the
EH
- vector, or with the same preciseness by a coordinate system
defined by the E+45°
- vector and the E-45°
- vector.
This concept is easy to understand if one considers the angles
of orientation when a slanted dipole is viewed from different
perspectives.
A dipole, which is set at a slant of +45° when viewed from the
front, will appear to be vertically polarized when viewed from
the side and will then appear at a slant of -45° when viewed from
the rear.
Tx1
Duplexer
Rx1a
+Rx2a
Tx2
Duplexer
Rx1b
+Rx2b
+45° polarizedvertically polarized
-45° polarized
Dipole
Fig. 6: Separation of a vector E into orthogonal
components
vertical+45°
45°
horizontal
E
E+45
EV
E-45
EH
-45°
45°-polarization: EH
= EV
= E+45
-3dB, E-45
=0
α
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 347/365
Technical Information
This means that the exactness of the 45° polarization of an x-polar-
ized antenna can be tested by measuring the radiation pattern in
vertical polarization and in horizontal polarization or, alternatively
by measuring the radiation pattern in +45° polarization and in
-45° polarization (Fig. 7 and Fig. 8).
If the field strength vector is exactly +45°, the co-polar value is
100% and the cross-polar value is 0%.
In other words, if the polarization is almost 45°, the radiation
patterns measured in vertical polarization Ev
and in horizontal
polarization EH
will also be quite close to each other, or referring
to the second coordinate system, the cross-polar value E-45°
of the
field strength will be much smaller than the co-polar one E+45°
.
If the polarization is exactly 45°, the half power beam widths
of the radiation patterns measured in vertical polarization and
in horizontal polarization are all of the same value.
Dual Polarized Base Station Antennas ForPolarization Diversity Systems (cont)
Fig. 7: Radiation pattern of a Kathrein Scala Division X-
polarized 65° Antenna, measured with vertical and
horizontal polarization.
Fig. 8: Radiation pattern of a Kathrein Scala Division
X-polarized 65° Antenna, measured with +45° and
-45° polarization.
Formula For Estimating Gain For A StandDirectional Dipole Array Using The E & HPlane Patterns
*Gain (dBi) @ 10 log (32400/EH)
E = E plane 3 dB beamwidth in degrees
H = H plane 3 dB beamwidth in degrees
Formula does not take into account losses for internal harnes
and input connector losses.
Estimated harness loss 0.2 dB/meter of antenna length
Estimated connector loss 0.1 dB
Printed circuit antennas have higher losses causing less
ciency.
*R. S. Elliot, “Beamwidth and Directivity of Large Scanning Arra
The Microwave Journal, January 1964
Calculating Downtilt
Example
1 mile = 5,280 ft
6.2 miles x 5,280 = 32,736 ft
2400 ÷ 32, 736 = 0.0733138
tan-1(0.0733138) = 4.2 degrees
Formula
angle = tan-1 (h
1-h
2)(
d)
Where: h1= Elevation of the base antenna (ft)
h2= Elevation of the mobile antenna (ft)
d = Distance (ft)
11,000 feet
8,600 feet
2,400 feet
6.2 miles
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 348/36532
Technical Information
Kathrein X-Pol Panels 1800 MHzTypical Cross Polar Ratio (CPR)
CPR CPR CPR
Half-power Main ±30° ±60°
Beam Width direction sector sector
65° 20 dB 16 dB 14 dB
90° 17 dB 13 dB 10 dB
Many of the X-Pol antennas on the market are of patch technology
on printed circuit boards for power-splitting purposes. Kathrein,
or many years, has used the proven dipole-type technology to-
gether with low-loss cable harnesses, which clearly offers more
opportunities for perfecting certain antenna characteristics.
We present the new, Kathrein Panels as our concept for the
800/900 MHz X-Pol antenna line. We adapted the excellent and
well proven mechanical design used in our line of 1800/1900
MHz antennas. Instead of a fiberglass cover screwed and sealed
o an aluminum back-plate, the radome now consists of a closed,
elf-supporting fiberglass profile into which the metal parts of
Advanced X-POL Antenna Standards
Kathrein Scala Division X-Pol antennas for polarization diversity
epresent the latest development stage in antenna technology. An
ncreasing number of network operators realize the advantage
f installing three dual +/-45 degree polarized antennas for a
omplete three sector site, where previously six or nine vertically
olarized antennas had to be installed.
For polarization diversity to function properly it is very important
hat the different polarized signals are as independent as possible
rom each other (principle of uncorrelated signals). The most
mportant point is the “Cross-polar ratio (CPR)”, i.e. the ratio of
he signal levels of similar polarizations compared to dissimilar
olarizations. The CPR should be quoted for the whole sector
width (+/-60 degree), not just for the main radiating direction.
The antenna gain is already considerably reduced at the sector
dges due to the horizontal pattern, therefore a CPR as high as
ossible is desired. The system suppliers demand at least 10 dB
or +/-60 degree from the main direction. Kathrein Scala Division
X-Pol antennas more than fulfil these requirements.
Kathrein X-Pol Panels 800/900 MHzTypical Cross Polar Ratio (CPR)
CPR CPR CPR
Half-power Main ±30° ±60°
eam Width direction sector sector
65° 22 dB 20 dB 15 dB
90° 20 dB 15 dB 12 dB
Advanced X-POL Antenna Standards (cont)
the antenna are inserted. There are no drill-holes at all in the
profile which is closed by two sealed end caps. This completely
closed design offers ideal permanent protection against environ-
mental influences and also increases the mechanical stability of
the antennas.
Apart from the existing comprehensive range of X-Pol antennas
which can be found in our catalogues, we now also have low
gain versions for 800/900 MHz band with a length of 26 inches
(656 mm).
Advantages of Kathrein’s dipole X-Pol type antennas com-
pared to typical patch printed or circuit board solutions:
1. Excellent cross polar ratio over azimuth.
The dipole design delivers remarkable cross polar ratio not
only in the main direction but also across the complete sec-
tor.
2. Low intermodulation products.
Unlike printed circuit antennas, the intermodulation products
are typically -150 dBc (2X25 watts).
3. Low internal losses.
The cable harness provides a low loss power distribution,
which enables shorter antenna lengths.
4. High isolation.
Patent pending decoupling elements ensure an isolation
between the two inputs of a min. >30 dB (typically 35 dB).
5. Constant electrical performance under bad weather condi-
tions.
Due to the dipole design, rain, ice and snow have little ef-
fect on the electrical parameters such as VSWR, isolation
and cross polar ratio.
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 349/365
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 350/36534
Comparison of Mechanical and Electrical Downtilt
Mechanical Electrical
The downtilt angle varies over the horizontal beamwidth. Patterns
measured ±90° from the center of the beam have decreasing tiltangle until there is no tilt 90° from the main beam.
The horizontal half-power beam width increases with greater
downtilt angle.
The resulting gain reduction depends on azimuth direction.
● There is uniform downtilt over the whole azimuth range.● The horizontal half-power beamwidth is independent of the
downtilt angle.● There is identical gain reduction in all azimuth directions.
Mechanical Downtilt Electrical Downtilt
65°
90°
65°
90°
Colors indicate
mechanical and
electrical downtilt
angles
6°
8°
0°
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 351/365
Signal Distribution of Power Splitters Signal Distribution of Power Taps
Tx direction: The RF power fed into port 1 is equally split
between ports 2 and 3.
Rx direction: Ports 2 and 3 are not matched to 50 ohms. The
result is a miss match loss, 25% of the signal is
reflected at port 2 as well as port 3.
Port 2 and 3 are not decoupled; therefore 25% of
the signal is delivered from port 2 to port 3 and
vice versa.
The remaining 50% of the Rx power from ports 2
and 3 is passed on to port 1 (attenuation 3 dB).
Conclusion: Power splitters are reciprocal devices, the power
distribution applies to both directions
Normal insertion losses, input ↔ outputs
2-way splitter : -3 dB
3-way splitter : -4.7 dB
4-way splitter : -6 dB
antennaantenna
50%Tx3
Rx2
25%Rx3 25%Rx2 25%Rx3 25%Rx22 3
50%Rx2
50%Rx3
Rx3
Tx
1
to/from antenna
50%Tx2
Tx direction:The main part of the power from port 1 is directly delivered
port 2, only a small part is coupled out capacitively at port 3
the power relation port 3/port 2 is 1/10;
insertion loss: port 1 → port 2 : 0.4 dB
port 1→ port 3 : 10.4 dB
Rx direction:Ports 2 and 3 are not matched to 50 ohms and the different i
pedances create different miss match losses. Furthermore, po
2 and 3 are not decoupled;
signal flow: port 2 : 0.8 % reflected signal
8.2 %→ port 3
91.0 % → port 1 (attenuation 0.4)
port 3 : 83.0 % reflected signal
8.0 %→ port 2
9.0 %→ port 1 (attenuation 10.4 dB)
Conclusion:Power taps are reciprocal devices, the selected power distribu
applies to both directions.
antenna
91%Tx2
to/from antenna
antenna
9%Tx3
Rx28%Rx3
0.8%Rx
83%Rx3 8.2%Rx2
2
3
91%Rx2
9%Rx3
Rx3
Tx
1
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 352/36536
λ
λ
λ
Examples of Horizontal radiation patterns for different mast
diameters where A=0.25λ, 0.5λ, 0.75λ.
Examples also apply for antenna HDB-450.
Radiation Patterns for Side-mountedOmnidirectional Antennas
Radiation Patterns for Side-mountedOmnidirectional Antennas (cont)
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 353/365
Directional Antennas In Front of ReflectingSurfaces
Antennas mounted in front of a reflecting surface, like a building
ace or other large conductive surface, will cause the horizontal
adiation pattern to change. Part of the radiated energy is reflected
and coupled with the reflecting surfaces. Little to no change is
noticed in a reflective environment to the horizontal pattern, when
he center of the main lobe is perpendicular to the reflecting wall.
Deviation from this angle results in more power being radiated
owards the wall, causing greater reflections and coupling with
more distortion of the horizontal radiation pattern.
The reflecting surface depicted in the attached diagrams consists
of a concrete block wall. The panel antennas have 18 dBi of gain
and a 65° horizontal half-power beamwidth. The resulting pat-
erns shown in the following diagrams are for various distances
d) in front of the wall and angles (α) at a frequency of 1850 MHz.
Gain variances reflect changes to the horizontal pattern.
Conclusion: When using an antenna with 60–65 degree half-power beamwidth, the skew angle can be up to ≈30°. Antennas
with 90° should be at a skew angle of no more than ≈15°. In
all instances, the distance from the building should be kept to a
minimum.
S = 0.5 inch
0°
Concrete Block Wall
S = 6 inch
Directional Antennas In Front of ReflectingSurfaces (cont)
0°
0°
S
22.5°
22.5°
S = 6 inch
S = 12 inch
22.5°
Concrete Block Wall
S
S = 12 inch
S = 24 inch
0°
0°
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 354/36538
Concrete Block Wall
Directional Antennas In Front of ReflectingSurfaces (cont)
S
45°
45°
45°
45°
S = 6 inch
S = 12 inch
S = 24 inch
22.5°
S =24 inch
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 355/365
Isolation Between Dipo
Isolation between two half-wave dipoles, vertically polarized and positioned vertically in line above eachother on one common mast.
Isolation between two vertically polarized half-wave dipoles mounted laterally.
44
42
40
38
36
34
32
30
28
K o p p e l d ä m p f u n g
dB
3 4 5 6 7 8 9 10 15 20
60
58
56
54
52
50
48
46
44
K o p p e l d ä m p f u n g
dB
20 30 40 50 60 80 100 120
s
I s o l a t i o n
I s o l a t i o n
d
Ratio: Distance (d) / wave-length ( ) Ratio: Distance (d) / wave-length ( )
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 356/36540
Engineering Reference - Equations
where: Γ = reflection coefficient
Zr= impedance at reflection
Zo
= characteristic impedance (typically 50Ω)
Voltage Reflection Coefficient
Γ =Z
r- Z
o
Zr+ Z
o
RSLdB
to VSWR
VSWR =( )(RSLdB
20+1)10
( )(RSLdB
20-1
)10
VSWR to RSLdB
RSLdB
= 20Log( )VSWR-1VSWR+1
where: r = VSWR
Γ = reflection coefficient
Pr= reflected power
Pi= incident power
Pt= transmitted power
Voltage Standing Wave Ratio (VSWR)
εr, at frequency ε′,
Material μr
60 106 1010 60 106 1010 (V/inch)
Nylon 1 3.60 3.14 2.80 0.018 0.022 0.0110 400
Plexiglas 1 3.45 2.76 2.50 0.064 0.104 0.0050 990
Polyethylene 1 2.26 2.26 2.26 (<0.0002) 0.005 1200
Teflon (22°C) 1 2.10 2.10 2.10 (<0.005) 0.004 1500
Material μr ε
r σ( /m) Depth of penetration δ for plane waves (m)
Silver 1 1 6.17 x 107 0.064/ √ f
Copper 1 1 5.8 x 107 0.066/ √ f
Aluminum 1 1 3.72 x 107 0.083/ √ f
Brass 1 1 1.6 x 107 0.013/ √ f
ε″ at frequency
Metals
Nonmetals
Material Parameters at 20°C Table 1.1
where: εris relative dielectric from Table 1.1
Characteristic Impedance of Free Space (cont)
c = √μoε
o= propagation velocity = 2.997925 x 108 m/s
(≅ 3 x 108 m/s)
In free space the wavelength is:
For a nonmagnetic dielectric:
1
c
f λ =
c
f √εr
λd = =
λo
√εr
r =1 + ⏐Γ⏐
1 - ⏐Γ⏐VSWR =
Pr
Pi
=⏐Γ⏐2
= r - 1r + 1( )
2
Pt
Pi
=1-⏐Γ⏐2
= 4r
(r + 1)2
Admittance Y = G± jX =1 - Γ1 + Γ( )1
Z= Y
0
Impedance Z = R± jX =1 + Γ1 - Γ( )1
Y= Z
0
where: μo
= free space permeability
= 4.0π x 10-7(H/m)
εo
= free space permitivity
= (F/m)
Characteristic Impedance of Free Space
(10−9
36π)
ηo =
μo
εo
= 120πΩ = 377Ω√
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 357/365
Engineering Reference - Equations (cont)
dBw to Watts
Watts = 10
Milliwatts = 10
(dBw10 )
( dBw+3010 )
dBm to Watts
Watts = 10
Milliwatts = 10
(dBm-3010 )
(dBm10 )
where: Pr= received power
Pt= transmitted power
R = separation distance
Friis Transmission Equation
= free space loss
Using effective areas
( )P
r
Pt
=λ
4πR
2
Gt Gr
Pr
Pt
=A
etA
er
λ2R
( )λ4πR
2
Quarter Wave Matching
Z = √ZoZ
L
where: Z = line impedance
Zo
= desired input impedance
ZL
= given load impedance
Effective Aperature Related to Gain of Antenna
G
=
4πAem
λ2
A
em=
λ2
4π G
Watts to dBm
dBw = 10 log10
(Power Watts)
dBm = (10 log10(Power Watts))+30
Noise Factor
F = ( )Pno
GAP
ni
= SNRIN
SNROUT
= Te
To
-1
NF = 10LogF
Noise Figure
F = F1
+
Cascade Noise Factor
F2-1
GA1
F3-1
GA1GA1
+ +…
Voltage Gain/Loss to dB
dB(gain/loss)
= 20Log10
(Gain or Loss)
dBm to Volts/ μVolts
Volts = Log10
-1( )dBm-1320
μVolts = Log10
-1( )dBm-10720
dBw to Volts/ μVolts
Volts = Log10
-1( )dBw-1720
μVolts = Log10
-1( )dBw-13720
Engineering Reference - Equations (cont)
Characteristic Impedance of Coaxial Line
where: a = inner diameter
b = outer diameter
μr
= relative permeability (usually = 1)
εr
= permitivity (dielectric constant)
as given in Table 1.1
a
Zo
= 138 log10
(
b
a)
μr
εr
√b
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 358/36542
Freespace Path Loss
L = 96.6 + 20 log(d) + 20 log(f)
where: L = freespace path loss
d = distance in miles
f = frequency in GHz
Directive Antenna Gain
where: G = directive antenna gain
θ = horizontal beamwidth
φ = vertical beamwidth
41253θ . φ
theoretical
G =32400θ . φ
corrected for efficiencies
G =
(
Gain of Parabolic Antenna
where: G = parabolic antenna gain
K = eff L 55%
D = diameter in feet
λ = wavelength in feet
πD
λG = 10 logK )2
Beamwidth of Parabolic Antenna
where: Ψ = beamwidth D = diameter in feet
λ = feet
70λD
Ψ =
Radio Horizon (in miles)
H = √2Tx Rx
where: H = horizon
Tx = transmit height in feet
Rx = receive height in feet
0 10 20 30 40 50 60 70 80 90-10
-8
-6
-4
-2
0
Scan Angle From Broadside, θ
N o r m a l i z e
d D i r e c t i v i t y ,
d B
2πL
λ = 10
2πL
λ = 100
Cos θ
Reprinted from “Microwave Scanning Antennas”, edited by R. C. Hansen, Vol. 1, p. 20, published by Peninsula Publishing, Los Altos, California.
Courtesy of R. C. Hansen
Engineering Reference - Equations (cont)Engineering Reference - Equations (cont)
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 359/365
Engineering Reference - Equations (cont)
10 20 30 40 50
Sidelobe Ratio, dB
B e a m B
r o a d e n i n g
Taylor one-parameter distribution
Courtesy of Dr. R. C. Hansen
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.0
Beam Broadening Versus Sidelobe Ratio
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 360/36544
XRTT – a wireless telephone digital protocol.
G – Third Generation Wireless – wireless telephone service
encompassing high speed data communications in addition
to voice communications.
AISG – Antenna Standards Interface Group – a global standards
organization whose objective is the establishment of open
control standards among manufacturers of base stations,
switches and base station antennas with remotely adjustable
downtilt.
AMPS – Advanced Mobile Phone System – an analog wireless
telephone protocol; also refers to the 824–894 MHz wireless
phone allocation in the US.
Antenna – The part of transmitting or receiving system that is
designed to radiate or to receive electromagnetic waves.
Array Antenna – An antenna comprised of a number of identical
radiating elements in a regular arrangement and excited to
obtain a prescribed radiation pattern.
AWS – A specific band of radio frequencies (spectrum) intended
to be used for next-generation wireless broadband services.
Most of the spectrum will be used for 3G mobile phone
service, using technologies such as WCDMA+HSDPA or
CDMA EV-DO.
Back Lobe – A radiation lobe whose axis makes an angle of
approximately 180 degrees with respect to the beam axis
of an antenna.
Bandwidth (of an antenna) – The range of frequencies within
which the performance of the antenna, with respect to some
characteristic, typically SWR or return loss, conforms to a
specified standard.
Beam (of an antenna) – The major lobe of the radiation pattern
of an antenna.
CDMA – Code Division Multiple Access – a wireless telephone
digital protocol.
Circularly polarized plane wave – A plane wave whose electricfield vector is circularly polarized.
CPR – Cross polar ratio – a measure on a cross polarized antenna’s
ability to maintain polarization coherence over a 120°
sector.
Dipole Antenna – Any one of a class of antennas producing
a radiation pattern approximating that of an elementary
electric dipole.
Directional Antenna – An antenna having the property of radiating
or receiving electromagnetic waves more effectively in some
directions than other.
Effective Radiated Power (ERP) – In a given direction, the relative
gain of a transmitting antenna with respect to the maximum
directivity of half–wave dipole multiplied by the net power
accepted by the antenna from the connected transmitter.
E-plane, principal – For a linearly polarized antenna, the plane
containing the electric field vector and the direction of
maximum radiation.
Far-field Pattern – Any radiation pattern obtained in the far–field
of an antenna.
Far-field Region – That region of the field of an antenna where
the angular field distribution is essentially independent of the
distance from a specified point in the antenna region.
Free–space Loss – The loss between two isotropic radiators in free
space, expressed as a power ratio.
Front-to-back Ratio – The ratio of the maximum directivity of an
antenna to its directivity in a specified rearward direction.
Gain – The ratio of the radiation intensity, in a given direction, to
the radiation intensity that would be obtained if the power
accepted by the antenna were radiated isotropically.
Gain Flatness – Maximum deviation from the specified antenna
gain, over the entire specified bandwidth.
Ground Plane – A conducting or reflecting plane functioning to
image a radiating structure.
GSM – Global System for Mobile Communications – a wireless
telephone digital protocol.
HAAT – Height above average terrain.
Half–Power Beamwidth – In a radiation pattern cut containing the
direction of the maximum of a lobe, the angle between the
two directions in which the radiation intensity is one–half
the maximum value
Horizontally Polarized Plane Wave– A plane wave whose electric
field vector is horizontally polarized.
H-plane – For a linearly polarized antenna, the plane containing
the magnetic field vector and the direction of maximum
radiation.
ISM band – Industrial, Scientific, and Medical band; several
bands allocated in the US for unlicensed low power
communications devices, at 900 and 2400 MHz; uses include
wireless LAN’s, Bluetooth applications, wireless internet,
and spread spectrum point–to–point services.
Isolation Between Antennas – A measure of power transfer from
one antenna to another.
GLOSSARY
Technical Information
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 361/365
Loading – The modification of a basic antenna such as a dipole
or monopole caused by the addition of conductors or
circuit elements that change the input impedance or current
distribution or both.
Log Periodic Antenna – Any one of a class of antennas having
a structural geometry such that its impedance and radiation
characteristics repeat periodically as the logarithm of
frequency.
Major Lobe – The radiation lobe containing the direction of
maximum radiation.
Minor Lobe – Any radiation lobe except a major lobe.
Monopole – An antenna, constructed above an imaging plane,
which produces a radiation pattern approximating that of an
electric dipole in the half space above the imaging plane.
Near-field Region – That portion of the near–field region of an
antenna between the far–field and the reactive portion of the
near–field region, wherein the angular field distribution is
dependent upon distance from the antenna.
Null Fill – Redirecting a portion of the signal from the Major Lobe
to fill the Nulls present between the Major Lobe and the
Lower Minor Lobes of the vertical radiation pattern. Used
to improve the coverage of area close in to the transmit site.
(Null Fill is typically represented as a percentage.)
Omnidirectional Antenna – An antenna having an essentially
non–directional pattern in a given plane of the antenna anda directional pattern in any orthogonal plane.
PCS – Personal Communication Services – Digital wireless
services that include voice and data employing either the
TDMA, CDMA or GSM protocols; also refers to the 1850–
1990 MHz wireless phone allocation in the US.
Polarization– In a given direction from the antenna, the polarization
of the wave transmitted by the antenna.
Radiation Pattern – The spatial distribution of a quantity that
characterizes the electromagnetic field generated by an
antenna.
Radome – A cover, usually intended for protecting an antenna from
the effects of its physical environment without degrading its
electrical performance.
Reactive Field – Electric and magnetic fields surrounding an
antenna and resulting in the storage of electromagnetic
energy rather than in the radiation of electromagnetic
energy.
Reflector Antenna – An antenna consisting of one or more
reflecting surfaces and a radiating (receiving) feed system.
Relative Gain - The ratio of the gain of an antenna in a
direction to the gain of a reference antenna.
RET – Remote Electrical Tilt – antenna systems having the a
to adjust the tilt of the main beam from the horizontal to
angle below the horizon by remote means.
Side Lobe Level – The maximum relative directivity of a
lobe with respect to the maximum directivity of an ant
usually expressed in decibels.
Side Lobe Suppression – Any process, action, or adjustme
reduce the level of the side lobes or to reduce the degrad
of the intended antenna system performance resulting
the presence of side lobes.
TDMA – Time Division Multiple Access – a wireless telep
digital protocol.
TMA – Tower Mount Amplifier – a receive–only preamplifier
to overcome cable losses in high frequency communica
systems.
USLS – Upper sidelobe suppression – techniques empl
to reduce the first major upper sidelobe of an anten
prevent interference at distant cell sites employing com
channels.
UMTS – Universal Mobile Telephone Service – the ability fo
services to be provided on a worldwide basis using a com
protocol and overlapping radio spectrum.
VSWR – Voltage Standing Wave Ratio.
Vertically polarized plane wave – A plane wave whose el
field vector is vertically polarized.
V-pol – Vertically polarized antennas.
WiFi – Short for “Wireless Fidelity”, is a set of product compati
standards for wireless local area networks (WLAN) bas
the IEEE 802.11 specifications.
WiMAX – An acronym that stands for Worldwide Interopera
for Microwave Access, is a certification mark for prothat pass conformity and interoperability tests for the
802.16 standards.
WLAN – Wireless Local Area Network – Ethernet or
computer networking protocol deployed using RF in
of cable connections from node to node.
X-pol – Cross–polarized antennas; having independent radi
elements at ± 45°; used in diversity systems.
Yagi-Uda Antenna – A linear end-fire array consisting of a d
element, a reflector element, and one or more dir
elements.
Technical Information
GLOSSA
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 362/36546
Notes
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 363/365
Notes
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 364/36548
Notes
7/31/2019 kahrein katalogas
http://slidepdf.com/reader/full/kahrein-katalogas 365/365