ixion catalogue Jan07 PRINTmedprotunisia.com/wp-content/uploads/2017/03/ixion...miscellaneous 35-37 washing, handling & sterilization instructions 38 index 39-40 international distributors

i ionInstruments

™

tel +44[0] 1535 656 999 fax +44[0] 1535 656 969 email [email protected] web www.ixion-instruments.com 2 3

All instruments are

made from German Surgical

Stainless Steel with a

beautiful satin finish which

reduces glare.

All cutting edges are made from

Tungsten Carbide inserts

providing superior strength and

sharpness.

i ionInstruments

™

Providing the Highest Qual ity Precis ion Instruments to the profession.

tel +44[0] 1535 656 999 fax +44[0] 1535 656 969 email [email protected] web www.ixion-instruments.com

All instruments have a Box

Joint which provides reliable

smooth action and ensures the

tips align perfectly every time.

All instruments have a

Unique Streamline Design

providing a perfectly balanced

instrument.

All instruments are

finished with Round Smooth

Edges providing maximum

comfor t & safety for you and

your patient.

i ionInstruments

™

i ionInstruments

™

contents

distal end cutters 6-7

hard wire cutters 8-9

pin & ligature cutters 10-11

utility pliers 12-18

wire bending pliers 19-25

hand instruments & hemostats 26-29

lingual pliers 30-34

miscellaneous 35-37

washing, handling & sterilization instructions 38

index 39-40

international distributors 41-42

i ionInstruments

™


i ionInstruments

™

ix900Distal End Safety Hold Cutter with T.C.This instrument cuts wires close to the buccal tube and safely holds the distal end. The T.C. inserts ensure precision cutting, long wear and unsurpassed cutting performance.Cutting Capacity:archwires up to .021 x .025” (.55 x .64mm)

6 7

cutters

distal ends


i ionInstruments

™

ix901Long Handled Distal End Safety Hold Cutter with T.C.This instrument features extra long handles and a compact head to ensure easy access in hard to reach areas. The T.C. inserts provide unsurpassed performance and long wear.Cutting Capacity: archwires up to .021 x .025” (.55 x .64mm)

ix902Flush Cut Distal End Safety Hold Cutter with T.C.The flush cut feature of this instrument allows the archwire to be cut flush with the end of the buccal tube eliminating the possibility of patient discomfort resulting from archwire protrusion.Minimum Cutting Capacity: .016” (.41mm)Maximum Cutting Capacity: archwires up to .021 x .025” (.55 x .64mm)

ix902sFlush Cut Distal End Safety Hold Cutter with T.C. smallSame features as IX902, designed for smaller wires.Minimum Cutting Capacity:.012” (.30mm)Maximum Cutting Capacity:archwires up to .016 x .025” (.41 x .64mm)


i ionInstruments

™

cutters

ix905Hard Wire Cutter with T.C.Easily cuts any size archwire or pin. The T.C. inserts ensure precision cutting and perfect tip alignment.Minimum Cutting Capacity: .012” (.30mm)Maximum Cutting Capacity: archwires up to .021 x .025” (.55 x .64mm)

hard wire

8 9


i ionInstruments

™

ix906Hard Wire Cutter 15o Angle with T.C.Same features as standard hard wire cutter ix905 with the advantage of 15o angle for easier access to the posterior area. Minimum Cutting Capacity: .012” (.30mm)Maximum Cutting Capacity: archwires up to .021 x .025” (.55 x .64mm)

ix907Large Hard Wire Cutter with T.C.Cuts all types of wire. TC inserted tips ensure precision cutting and perfect tip alignment.Minimum Cutting Capacity: .014” (.36mm)Maximum Cutting Capacity: wires up to .039” (1mm)

ix908Heavy Duty Cutter with T.C.This instrument cuts up to 1.5mm wire with ease due to its triple action design.TC inserted tips ensure precision cutting and perfect tip alignment.Minimum Cutting Capacity: .014” (.36mm)Maximum Cutting Capacity: wire up to .060” (1.5mm)

i ionInstruments

™

cutters

ix910Pin Ligature Cutter 7oAngle with T.C.Standard cutter with 7o angled tips to allow easy access and better visibility in difficult areas. TC inserts ensure precision cutting of ligature wire, pins and elastics. Maximum Cutting Capacity: soft wire up to .016” (.41mm)

pin & ligature


i ionInstruments

™

ix911Micro-Miniature Ligature Cutter with T.C.The small narrow and sharp pointed tips allow easy access to the most difficult areas. The TC inserts ensure precision cutting of ligature wire and elastics.Maximum Cutting Capacity: soft wire up to .012” (.30mm)

ix912Standard Ligature Cutter with T.C.This cutter has fine tips for easier access to difficult to reach areas. Cuts pins, wire ligatures and elastics.Maximum Cutting Capacity: soft wire up to .015” (.40mm)

ix913Standard Ligature CutterSame design as IX912 but without T.C. inserts.Maximum Cutting Capacity: soft wire up to .012” (.30mm)

Caution: This delicate instrument is designed for the removal of soft stainless steel ligatures to a maximum of .012” diameter.


i ionInstruments

™

utility pliers

ix800Small Weingart Utility PlierSpecial features incorporated in Weingart style pliers make this one of the most popular. Matching serrated tips hold wires firmly at a convenient working angle. Carefully tapered beaks fit easily between brackets and are rounded for safety and comfort. Holds round, square and rectangular wires up to:.022 x .028” (.56 x .71mm)

12 13


i ionInstruments

™

ix801Small Weingart Utility Plier with T.C.Same as IX800 but with T.C. inserted tips providing maximum wire control & prevent the wire from slipping. Holds round, square and rectangular wires up to: .022 x .028” (.56 x .71mm)

ix802Large WeingartPrecision serrated tips are designed for heavy wires and to prevent the wire from sllipping. For safe and easy insertion or removal.Holds wire up to .030” (.076mm).

ix803Large Weingart Utility Plier with T.C.Same as IX802 with T.C. tips providing maximum wire control & to prevent the wire from sllipping.Holds wire up to .030” (.076mm).

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix804Fine Tipped WeingartSturdy contstruction without T.C.This strong but fine tipped utility plier allows excellent access in difficult to reach areas.Holds wire up to .022 x .028” (.56 x .71mm)

ix805How Utility Plier (Straight)A versatile utility plier with a long tapered tips. The 3/32” diameter tips are serrated to prevent slippage. The tips are rounded for patient comfort and safety.

ix806How Utility Plier (Angled)Similar to IX805 but with 45o angled tips for convenient access to lingual and other difficult to reach areas. Matching serrated tips hold wires firmly at a convenient working angle.

14 15

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix825Posterior Band Remover (Short)The plastic pad rests on the occlusal surface of the molar which places the removing tip in the perfect position to catch the gingival edge of the band. Replacement pads are available in 3/16” and 1/8” diameters.Replacement Tips 3/16” (5mm) - IX895 Replacement Tips 1/8” (4mm) - IX896

ix826Posterior Band Remover (Long)Same features as IX825 but with a longer band removing arm.Replacement Tips 3/16” (5mm) - IX895 Replacement Tips 1/8” (4mm) - IX896

ix820Crimpable Archwire Hook PlierDesigned for surgical ball hooks and auxiliaries. The slotted tip holds auxiliaries secure to provide for positive crimping.

ix895Replacement Tips 3/16” (5mm)Pk 3

ix896Replacement Tips 1/8” (4mm)Pk 3

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix828Direct Bond Remover (Angled)Same design as IX827 except the 60o angle allows easier access in difficult to reach posterior brackets.

ix829Direct Bond Remover with T.C.Removes brackets easily by holding the side of the bracket in a horizontal position or under the tie wing and applying pressure by torquing or turning in a clockwise motion.

ix827Direct Bond Remover (Straight)Sharp tips wedge between the edges of the bracket base and tooth surface to remove direct bond brackets safely and comfortably.

16 17

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix840Small Adams with T.C.Square beak 1mm at tip and parallel at .045” opening. Effective for wires up to .030” (.76mm).

ix841Force Module SeparatorDesigned for easy placement of separating elastics.

ix835Adhesive Removing PlierVinyl tube rests on the occlusal surface of the tooth ensuring no discomfort to the patient while the sharp metal tip removes adhesive from the labial surface with ease.

ix836Replacement Metal PadSold in packs of 2.

ix837Replacement Vinyl Tube 15cm

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com


ix822Band Contouring PlierHigh quality for the contouring of bands.

ix824Coon Ligature Tying PlierSelf-locking ligature tying plier with fine beaks for the ease of applying and tying s/s ligatures.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com


wire bending pliers

ix809Light Wire Plier with Cutter

This popular loop forming and bending plier with precise round and square tips bends archwires from .012” to .020” (.30mm - .51mm). Cutter at base of beaks cuts archwires from

.014” to .020” (.36mm - .51mm).

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix808Light Wire Plier with Cutter/2 GroovesThe most popular wire bending plier. These smooth tipped pliers bend archwires from .012” to .020” (.30mm - .51mm). Beaks are grooved for round wire at 1mm and 2mm from tip. Cutter at base of beaks cuts archwires from .014” to .020” (.36mm - .51mm).

ix811Light Wire Contouring & Cutting PlierWith longer, more gradually tapered beaks than model IX809, this plier is designed for round wires up to .020” (.51mm). The longer beaks make it easier to bend small diameter loops. Unique features are the contouring of loops and arches up to .021 x .025” (.55 x .64mm) and the built in cutter that allows wires to be cut from .014” to .020” (.36mm - .51mm).

ix807Light Wire Plier Same popular design as ix808, but without the cutter or the 2 grooves.

20 21

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix810Bird Beak PlierThe most popular and versatile plier for working with round wire up to .028” (.71mm). The round beak is precision ground to a perfect cone - .025” at the tip. The pyramid beak is exactly .025” wide at the tip.

ix872Bird Beak Plier with T.C.Same design as IX810 with the addition of T.C. tips providing maximum wire control and improved gripping.

ix821Long Beak Light Wire PlierLonger beaks than the ix810 for making precision loops in light wires. Can be used with round and square wire up to .020” (.51mm).

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix813Tweed Arch Forming PlierDesigned for torquing and bending square or rectangular wires. The blades are designed to be parallel at .020” opening. Can be used on wires up to .021” x .025” (.55 x .64mm).

ix871Tweed Arch Forming Plier with T.C.Same design as IX813 with the addition of T.C. inserted tips providing maximum wire control and improved gripping.

ix814O’Brien Loop Forming PlierThe perfect plier for making Bull, Omega and Closing loops. This plier has one precision cylindrical three-step beak and one concave, serrated surface to prevent wire slippage. Can be used with round & square wire up to .021 x .025” (.55 x .64mm).

ix812Tweed Loop Forming Plier with CutterIdeal for making consistent uniform loops. The tip has three sections of 1.2mm, 1.8mm and 2.0mm with matt finish to prevent wire slippage. Can be used with round and square wire up to .021 x .025” (.55 x .64mm). Built in cutter allows wire to be cut from .014” to .020” (.36mm - .51mm).

22 23

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix8163-Jaw PlierPrecision aligned tips are gently rounded for consistent contouring and bending without damaging the archwire. One-piece construction of the double tip ensures superior strength. Can be used on wire up to .030” (.76mm).

ix819Small 3-Jaw PlierSame design as IX816 but with slightly smaller tips for working with wire up to .020” (.51mm).

ix823Fine 3-Jaw PlierSmaller tips than the IX819.Can be used with wires from .012” Nickel Titanium up to .020” (.51mm)

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix818De La Rosa with GrooveSame design as IX817 but with additional grooves measuring .016” (.41mm), .018” (.46mm) and .022” (.56mm) respectively.

ix817De La RosaPrecision matched concave and convex tips for smooth contouring of light wire loops. Contours and forms arches without torquing.Can be used on wires up to .021 x .025” (.55mm x .64mm).

ix815Nance PlierPrecision loop forming with four step tips 3mm, 4mm, 5mm & 6mm. Excellent for round & square wires up to .022” (.56mm). All working edges have been bevelled to prevent wire scoring.

24 25

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix830Hollow ChopConvex/Concave tips enable adjustment of all types of loops.

ix873(set)Torquing Plier SetThe torquing plier set allows the accurate placement of torque to square/rectangular archwires. Both Male and Female parts have hard wearing Tungsten Carbide tips.


i ionInstruments

™

hand instruments and hemostats

ix850Direct Bond Bracket HolderSpring loaded reverse action holds brackets until release is desired. Blade at the end of the tip helps with final bracket slot position.

26 27


i ionInstruments

™

ix845Mershon Molar Band SeaterStainless steel serrated tip for a positive control.

ix846Mershon Band Pusher Small Round HandleSame tip as IX845, but with lower profile handle.

ix847Mershon Band Pusher Flat HandleSame tip as ix845, ix846 but with a slim line handle.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix862Mathieu Needle Holder (Standard)Sturdy, rounded tips designed for twisting ligature wire.

ix861Mathieu Needle Holder with T.C.Sturdy, rounded tips designed for twisting ligature wire. Tungsten Carbide tips.

ix855Mosquito ForcepsStainless steel with serrated tips and positive locking ensure consistent performance.

28 29

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix863Smaha (Straight)Fine tips but strong enough for inserting archwires. Excellent for placing elastomeric ligatures.

ix860Small Tip Mathieu Needle HolderFiner tips than the IX861.

ix864Curved Mathieu Needle Holder with T.C.Sturdy rounded tips designed for twisting ligature wire. Curved Tungsten Carbide tip facilitates easy access in difficult to reach areas.

ix859Delux Mathieu Needle Holder with T.C.Short tip Mathieu is ideal for twisting ligature wires. Tungsten carbide inserts ensure maximum wire control.

ix865Curved Mathieu Needle Holder Same features as ix864 with regular stainless steel tips.

i ionInstruments

™

l ingual series

This Range of Lingual Instruments

has been developed specifically

to facilitate the ‘ar t’ of Lingual

Or thodontics.

We consulted many Lingual

Or thodontists in order that we

were able to produce a range of

instruments which fully met their

needs.

The small inter bracket widths

and working in par ts of the mouth

which are hard to reach with

traditional or thodontic instruments

gives the lingual technique an added

difficulty.

With these factors in mind we have

developed a range of instruments

with longer handles for the

difficult to reach areas, the heads

of the instruments are smaller to

accommodate the lack of space

and all instruments have the unique

Ixion smooth contours for added

patient comfor t.

30 31

i ionInstruments

™

ix958Flush Cut Distal End Safety Hold Cutter with T.C.The flush cut feature of this instrument allows the archwire to be cut flush with the end of the buccal tube, eliminiating the possibility of patient discomfort resulting from archwire protrusion.Minimum Cutting Capacity:.016 (.41mm)Maximum Cutting Capacity: archwires up to .021 x .025” (.55 x .64mm)

ix958sFlush Cut Distal End Safety Hold Cutter with T.C. smallSame features as IX958, designed for smaller wires.Minimum Cutting Capacity:.012 (.30mm)Maximum Cutting Capacity: archwires up to .016 x .025” (.41 x .64mm)

ix911Micro-Miniature Ligature Cutter with T.C.The small, narrow & sharp pointed tips allow easy access to the most difficult areas. The T.C. inserts ensure precision cutting of ligature wire & elastics. Maximum Cutting Capacity: soft wire up to .012 (.30mm)

Caution: This delicate instrument is designed for the removal of soft stainless steel ligatures to a maximum of .012” diameter.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

32 33

ix956Mini Ligature Cutter 50º AngleThe narrow tip is angled at 50º for excellent access to the upper arch. The T.C. inserts ensuring precision cutting of ligature wires and elastics. Maximum Cutting Capacity: soft wire up to .012” (.30mm)

ix955Bracket RemoverThe narrow sharp tips, wedge between the edges of the bracket base & tooth surface to remove direct bond brackets safely & comfortably.

ix957Mini Ligature Cutter 60º AngleSame features as ix956, but angled at 60º for excellent access to the lower arch. The T.C. inserts ensuring precision cutting of ligature wires and elastics. Maximum Cutting Capacity: soft wire up to .012” (.30mm)

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix952Stepped Tweed Arch PlierDesigned for torquing & bending both square & rectangular wires.The fine tips allow excellent access even in lower anterior region.Maximum Cutting Capacity: wire up to .021” x .025” (.55mm x .64mm)

ix953Cinch BackThe serrated tips of this instrument hold the wire securely while bending the wire 90o distal to the buccal tube, avoiding patient discomfort.For use with Nickel Titanium wires .012 - .018” (.30 x .46mm).

ix950Weingart 60º AngleSmall serrated tips are angled at 60º for easy access in the posterior region.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

34 35

ix864Curved Mathieu Needle Holder with T.C. Sturdy rounded tips designed for twisting ligature wire. Hard wearing, Curved Tungsten Carbide tip facilitates easy access.

ix865Curved Mathieu Needle Holder Same features as ix864 with regular stainless steel tips.

ix951Weingart 60º Angle with T.C.Same features as ix950 with the addition of Tungsten Carbide tips.Maximum .018” (.64mm) wire.

ix940Curved SmahaFine curved tips but strong enough for inserting archwires & excellent for placing elastomerics to lingual brackets.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

miscellaneous

ix866Bracket Height Gauge 3.5mm-5mm .018For precise bracket positioning of .018 brackets.

ix867Bracket Height Gauge 3.5mm-5mm .022For precise bracket positioning of .022 brackets.

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

ix870Serrated ScissorsStainless steel with serrated tips. Ideal for cutting stainless steel tape, bands and ligatures.

ix880Plaster Knife

ix881Small Wax Knife

ix882Large Wax Knife

36 37

tel +

44

[0] 15

35 6

56 9

99

f

ax +

44

[0] 15

35 6

56 9

69

e

mai

l sal

es@

ixio

n-in

stru

men

ts.com

web

ww

w.ix

ion-

inst

rum

ents

.com

i ionInstruments

™

Instrument Code RingsDesigned to fit orthodontic plier handles, scalers, band seaters, hemostats and other orthodontic instruments.Made out of high temperature silicone that can withstand repeated autoclaving and heat sterilizations up to 370 degrees.Available in packs of 100.

ix101Small RackAutoclavable Stainless Steel Racksize L 110mm x H 120mm

ix102Large RackAutoclavable Stainless Steel Racksize L 155mm x H 120mm

ix100Curved RackAutoclavable Stainless Steel Racksize L 95mm x H 125mm

Blue ix110

Green ix111

Purple ix112

Red ix113

Black ix114

Orange ix115

Pink ix116

White ix117

Tan ix118

Yellow ix119

Brown ix120

Dark Grey ix121

Mixed Colours ix122


i ionInstruments

™

Instruments are not sterile upon receipt and must be sterilized before use in accordance with the following instructions.

Remove all packaging prior to cleaning and sterilization.

Alkaline and acidic detergents can cause damage to the instruments.

Always use a pH neutral detergent or solution.

Do not exceed 160 oC.

Cleaning InstructionsRemove any excess oil with a disposable paper towel.

ManualBrush using a neutral cleaning agent and ensure that the instrument is cleaned thoroughly on all surfaces and joints. Rinse under clean running water for 3 minutes. Repeat full process if necessary. Dry using a paper towel.

AutomaticUse only validated washing machines (HTM 2030 - UK only) and validated cleaning agents suitable for the instruments and washing machine.

When removing the instruments from the washing machines please check for cleanliness and repeat the cycle if necessary. Check for any damage or corrosion. Cutting edges should be free of defects and ensure that detachable tips are secure.Always lubricate joints and hinges before sterilization.Please Note: Instruments left standing wet may corrode!Dry using a paper towel or dry heat not exceeding 160oC.

Warranty & RepairIxion Instruments are warranted to be free of defects in material and workmanship for 5 years. DBO will sharpen free of charge within 90 days of purchase any cutter which fails to cut the intended wire size.

Mis-use, abuse or failure to maintain or care for instruments properly will void warranty claims. DBO’s sole responsibility will be, at it’s own discression, to repair, replace or credit the instrument in the event of any claimed defects.

Adherence to recommended cleaning, sterilization and lubrication practices will help ensure optimum instrument performance. Cutting instruments that are used frequently should be reconditioned every six to nine months. Joints should be lubricated with a medical grade lubricant always after sterilization.

Warranty does not cover routine maintenance, sharpening or reconditioning.

Warranty claims or service request should be forwarded to your distributor.

Contact

DB Orthodontics LimitedRyefield Way, Silsden, West YorkshireBD20 0EF United Kingdom

Tel: +44 [0] 1535 656 999 Fax: +44 [0] 1535 656 969email: [email protected]: www.ixion-instruments.com

SterilizationInstruments should be loaded into perforated instrument trays or general purpose sterilization trays ensuring the cutting edges are not in contact with the trays to avoid damaging the cutting surfaces. When sterilizing more than one instrument care should be taken to prevent the instruments from touching as this may cause damage or corrosion.

The UK Department of Health recommends that validated, pre-vacuum autoclaves are used for sterilizing wrapped instruments. Autoclaves drawing only a post sterilization vacuum for drying purposes are not suitable for processing wrapped instruments.

Use only validated vacuum autoclaves (HTM 2010 - UK only). Do not exceed 160oC. Do not exceed the manufacturers stated maximum load.

Additional informationValidated ultrasonic baths may be used with validated cleaning agents. Follow instructions for use issued by the equipment and cleaning agent manufacturer.

It remains the responsibility of the reprocessor to ensure that the reprocessing has actually achieved the desired result. This normally requires validation and routine monitoring of the process. Any deviation by the reprocessor from these instructions should be properly evaluated for effectiveness.

Recommended washing, handling and sterilization instructions for IxionTM

Instruments

38 39


i ionInstruments

™

wire bending pliers

IX807 Light Wire Plier 20

IX808 Light Wire Plier with Cutter/2 Grooves 20

IX809 Light Wire Plier with Cutter 19

IX810 Bird Beak Plier 21

IX811 Light Wire Contouring & Cutting Plier 20

IX812 Tweed Loop Forming Plier with Cutter 22

IX813 Tweed Arch Forming Plier 22

IX814 O’Brien Loop Forming Plier 22

IX815 Nance Plier 24

IX816 3-Jaw Plier 23

IX817 De La Rosa 24

IX818 De La Rosa with Groove 24

IX819 Small 3-Jaw Plier 23

IX821 Long Beak Light Wire Plier 21

IX823 Fine 3-Jaw Plier 23

IX830 Hollow Chop 25

IX871 Tweed Arch Forming Plier with TC 22

IX872 Bird Beak Plier with TC 21

IX873 Torquing Plier Set 25

IX910 Pin Ligature Cutter 7o Angle with TC 10

IX911 Micro-Miniature Ligature Cutter with TC 11

IX912 Standard Ligature Cutter with TC 11

IX913 Standard Ligature Cutter 11

pin & ligature cutters

utility pliers

IX800 Small Weingart Utility Plier 12

IX801 Small Weingart with TC 13

IX802 Large Weingart 13

IX803 Large Weingart with TC 13

IX804 Weingart 14

IX805 How Utility Plier (Straight) 14

IX806 How Utility Plier (Angled) 14

IX820 Crimpable Archwire Hook Plier 15

IX822 Band Contouring Plier 18

IX824 Coon Ligature Tying Plier 18

IX825 Posterior Band Remover (Short) 15

IX826 Posterior Band Remover (Long) 15

IX827 Direct Bond Remover 16

IX828 Direct Bond Remover (Angled) 16

IX829 Direct Bond Remover with TC 16

X835 Adhesive Removing Plier 17

X836 Replacement Metal Pad 17

X837 Replacement Vinyl Tube 17

IX840 Small Adams with TC 17

IX841 Force Module Separator 17

IX895 Replacement Tips 3/16” (5mm) 15

IX896 Replacement Tips 1/8” (3mm) 15

IX905 Hard Wire Cutter with TC 8

IX906 Hard Wire Cutter 15o Angle with TC 9

IX907 Large Hard Wire Cutter with TC 9

IX908 Heavy Duty Cutter with TC 9

hard wire cutters

IX900 Distal End Cutter with TC 6

IX901 Long Handled Distal End Cutter with TC 7

IX902 Flush Cut Distal End Cutter with TC 7

IX902s Flush Cut Distal End Cutter with TC 7

distal end cutters

index[1 of 2]


i ionInstruments

™

hand instruments & hemostats

IX845 Mershon Molar Band Seater 27

IX846 Mershon Band Pusher Small Round Handle 27

IX847 Mershon Band Pusher Flat Handle 27

IX850 Direct Bond Bracket Holder 26

IX855 Mosquito Forceps 28

IX859 Delux Mathieu Needle Holder with TC 29

IX860 Small Tip Mathieu Needle Holder 29

IX861 Mathieu Needle Holder with TC 28

IX862 Mathieu Needle Holder (Standard) 28

IX863 Smaha (Straight) 29

IX864 Curved Mathieu Needle Holder 29

IX100 Curved Rack 37

IX101 Small Rack 37

IX102 Large Rack 37

IX110-IX122

Instrument Code Rings 37

IX866 Bracket Height Gauge 3.5mm-5mm .018 35

IX867 Bracket Height Gauge 3.5mm-5mm .022 35

IX870 Serrated Scissors 36

IX880 Plaster Knife 36

IX881 Small Wax Knife 36

IX882 Large Wax Knife 36

miscellaneouslingual pliers

IX864 Curved Mathieu Needle Holder with TC 34

IX865 Curved Mathieu Needle Holder 34

IX911 Micro-Miniature Ligature Cutter with TC 31

IX940 Curved Smaha 34

IX950 Weingart 60o Angle 33

IX951 Weingart 60o Angle with TC 34

IX952 Stepped Tweed Arch Plier 33

IX953 Cinch Back 33

IX955 Bracket Remover 32

IX956 Mini Ligature Cutter 50o Angle 32

IX957 Mini Ligature Cutter 60o Angle 32

IX958 Flush Cut Distal End Safety Hold Cutter with TC

31

IX958s Flush Cut Distal End Safety Hold Cutter with TC small

31

40 41

index[2 of 2]


i ionInstruments

™

international distributors [1 of 2]

BELGIUM / LUXEMBURG

B-dental

Kerkstraat 164

B-3290 Schaffen (Diest)

Belgium

tel: +32 [0] 13 290781

fax: +32 [0] 13 290780

email: [email protected]

FINLAND

Ortomat Herpola Oy

PL34

Kayntiosoite: Nosturinkatu 1

20101 Turku

Finland

tel: +358 22764700

fax: +358 22764710


web: www.ortomat-herpola.fi

FRANCE

Societe Des Cendres

39 Rue des Francs-Bourgeois

75004 Paris

France

tel: +33 [0] 144 592424

fax: +33 [0] 144 592449

GERMANY

ODS GmbH

Dorfstrasse 5f

D24629 Kisdorf

Germany

tel: +49 [0] 4193 965840

fax: +49 [0] 4193 965841


web: www.odsshop.de

HOLLAND

Dental Depot Lomberg

Vredehofstraat 3-5

3761 Soest

Holland

tel: +313 56018578

fax: +313 56025480


ITALY

OrtoLinea s.r.l.

Via Arese no. 11

20159, Milano

Italy

tel: +39 [0] 2 6684949

fax: +39 [0] 2 6686065


web: www.ortolinea.it

UNITED KINGDOM

DB Orthodontics Limited

Ryefield Way, Silsden

West Yorkshire

BD20 0EF

United Kingdom

telephone:

+44 [0] 1535 656 999

fax:

+44 [0] 1535 656 969

email:

[email protected]

web:

www.ixion-instruments.com

head office


is a Trademark of DB Orthodontics Limited.

POLAND

Orto Trading

ul. Husarii 11B

02-951 Warsaw

Poland

tel: +48 226518409

fax: +48 228425368


web: www.ortotrading.com.pl

SOUTH KOREA

Corea Dental

8F Namdaemun Jeomang Tower B/D

1-2 Namdaemunno 5-ga

Jung-gu-Seoul

Korea (100-800)

tel: +82 2 7771770

fax: +82 2 7771790

SPAIN

DistriClinic S.L.L.

C/Santander, 1-1º D

28230 Las Rozas (Madrid)

Spain

tel: +34 [0] 91 7104462

fax: +34 [0] 91 7104469


web: www.districlinic.com

TAIWAN

Anderson Rubbermate Co. Ltd.

No. 15-1, Lane 249, Sec. 1

Yaofeng Rd., Pusin

Changhua County 513

Taiwan

tel: +886 4 8291581

fax: +886 4 8290525


USA

ClassOne Orthodontics Inc.

5064 - 50th Street

Lubbock, Texas 79414

USA

tel: +1 806 7990608

fax: +1 806 7974604


web: www.classoneortho.com

NORWAY

Unitrade SA

P.O.BOX 216

3251 Larvik

Norway

tel: +47 33181750

fax: +47 33182082


MEXICO

Bresal Ortho

Juan Cordero 8, Cto. Pintores

Ciudad Satelite, Naucalpan

C. P. 53100

Edo. de Mexico

tel/fax: +52 55 58080769


international distributors [2 of 2]

42

SOUTH AFRICA

FTO Dental Pty Ltd.

138 10th Avenue

Edenvale 1610

South Africa

tel: +27 11 60987222


i ionInstruments

™

DB Orthodontics Limited Ryefield Way, Silsden West Yorkshire BD20 0EF United Kingdom

telephone +44 [0] 1535 656 999 fax +44 [0] 1535 656 969 email [email protected] web www.dbortho.com

Documents

ixion catalogue Jan07 PRINTmedprotunisia.com/wp-content/uploads/2017/03/ixion...miscellaneous 35-37 washing, handling & sterilization instructions 38 index 39-40 international distributors