Is b 2001004

8/12/2019 Is b 2001004

1/6

Bulletin No. : ISB-2001004

Date : July 25,2001

Component

catagory: 09 - Body and accessories

Bulletin Group : Technical

Distribution : World wide

Sub ect : Memor in ut to REKESModels : Musso and Korando with the REKES

Condition :

This service bulletin is issused to clarify the procedure of REKES memory input on workshop manual.

REKES memory is inputed when,

The REKES transmitter is lost or faulty The REKES receiver is faultyWork rocedure :

1. 1st method : input memory using the switch of the REKES receiver

1-1. Location of the REKES receiver

1-1-1. Musso (before 1998 ; V.I.N. ~ 140079)

: under the dashboard and heater unit (rear side of audio head unit)

This service bulletin is intended for internal use only. All information, illustrations and specifications contained in this bulletin are

based on the latest product information available at the time of issue.

International A/S & parts team

REKES receiveron the bracket: Musso (before 1998)

REKES receiver: Musso (after 1998)and Korando

Tel: 82-31-610-1400

Fax: 82-31-610-3373

E-mail:[email protected]

Printed in Korea

SSANGYONG MOTORS COMPANYISB-2001004

Page No: 1 of 6

8/12/2019 Is b 2001004

2/6

1-1-2. Musso (after 1998 ; V.I.N. 140080~)

: under the dashboard and upper the acceleration pedal with STICS unit

1-1-3. Korando : under the dashboard and upper the acceleration pedal




Air duct

Vacuum linesof the ignition

key switch(diesel only)

STICS unit

Crank assy-bell,

Acceleration

REKES

receiver

REKESreceiver

Crank assy

-bell,Acceleration

Accelerationcable

Heaterunit

Air duct

Tel: 82-31-610-1400

Fax: 82-31-610-3373


Printed in Korea


Page No: 2 of 6

8/12/2019 Is b 2001004

3/6

1-2. Location of the input memory switch (Musso and Korando all)

1-3. Formation of the input memory switch (Musso and Korando all)

1-3-1. Oldversion receiver (~ Apr.19,1997)

1-3-2. Newversion receiver (Apr.20,1997 ~)




REKES receiver

Input memory switch

1 2

1st transmitterinput

position

Operatingposition

2nd transmitterinput

position

Transmitter(only one)

inputposition

Operatingposition

Tel: 82-31-610-1400

Fax: 82-31-610-3373


Printed in Korea


Page No: 3 of 6

8/12/2019 Is b 2001004

4/6

1-4. Input memory procedure : in condition of taking the key out


Replace the REKES receiver with a new one and connect the wiring connector when

the REKES receiver is faulty only.

Set the input memory switch of the REKES receiver onto the no.1 or no.2 position and

push the lock or unlock button on the REKES transmitter.

Set the input memory switch of the REKES receiver onto the central position and

close all doors.

Check the operation of central door lock system by pushing the lock and unlock button

on the REKES transmitter.

This REKES version can use two transmitters simultaneously for a vehicle.



the REKES receiver is faulty only. Set the input memory switch of the REKES receiver onto the position and

push the lock or unlock button on the REKES transmitter.

Set the input memory switch of the REKES receiver onto the position and

close all doors.

Check the operation of door locking system by pushing the lock and unlock button


This REKES version can use only one transmitter for a vehicle.

2. 2nd method : diagnosis socket use

2-1. Location and terminal arrangement of the diagnosis socket

2-1-1. Vehicle was made before 1998 : engine room left inside (near the fuse box)

[Terminal arrangement]

1. Ground 8. Blank

2. Ignition switch ON 9. Full time T/C

3. Power supply B+ (12V) 10. Blank

4. REKES input memory 11. Cruse control

5. Engine RPM(Gasoline) 12. Blank

6. Part time T/C 13. ABS7. STICS 14. Engine ECU




3 2

567 4

1

91011

121314

8

Tel: 82-31-610-1400

Fax: 82-31-610-3373


Printed in Korea


Page No: 4 of 6

8/12/2019 Is b 2001004

5/6

2-1-2. Vehicle was made after 1998 : engine room left inside (near the fuse box)

[Terminal arrangement]

1. Ground 11. Blank

2. Ignition switch ON 12. Blank

3. Power supply B+ (12V) 13. ABS

4. REKES input memory 14. Engine ECU

5. Engine RPM (Gasoline) 15. Full time T/C

6. Part time T/C 16. Immobilizer

7. STICS 17. Blank

8. Blank 18. Auto T/M (BTRA-TCU)

9. Blank 19. Blank

10. Air bag 20. ECS

2-1-3. Musso 2001 model year (V.I.N. 247012~) : under the dashboard (driver side)

5. Ground

6. STICS

7. Immobilizer

8. ABS

9. Air bag

10. Blank

[Terminal arrangement] 11. Blank

12. Full time T/C

1. ECS 13. Full & Part time T/C ,TOD

2. Ignition switch ON 14. Auto T/M (BTRA-TCU)

3. REKES input memory 15. Blank4. Ground 16. Power supply B+ (12V)

2-2. Input memory procedure : in condition of taking the key out




DC 5V currentsupply between terminal no.1(ground) and no.4(REKES input memory)

on the diagnosis socket in engine room. Push the lock or unlock button on the REKES transmitter.

Input memory and close all doors.






1 2

13 14 15 16 17 18 19 20

5 6 7 8 9 10 11 12

3 4

8 7 6 5 4 3 2 1

16 15 14 13 12 11 10 9

Tel: 82-31-610-1400

Fax: 82-31-610-3373


Printed in Korea


Page No: 5 of 6

8/12/2019 Is b 2001004

6/6




Except the Musso 2001 model year

Connect the terminal no.3(power supply B+,12V) and terminal no.4(REKES input memory)

which are on the diagnosis socket in engine room with service lead wire.

Musso 2001 model year only

Connect the terminal no.3(REKES input memory) and terminal no.16(power supply B+,12V)

which are on the diagnosis socket in engine room with service lead wire.

Push the lock or unlock button on the REKES transmitter.

Input memory and close all doors.



3. Part no. index

3-1. Transmitter assy-REKES

8715005001X : Ssangyong logo (Jul.01,1993 ~ Jun.30,1994)

8715005000 : Ssangyong logo (Jul.01,1994 ~ Mar.29,1999)

8715005001 : Daewoo logo (Mar.30,1999 ~)

8715005010: Ssangyong logo (Mar.30,1999 ~)

8715005800 : Daewoo logo, with EU regulation (Nov.30,1998 ~ Mar.29,1999)

8715005810: Ssangyong logo, with EU regulation (Mar.30,1999 ~)

3-2. Receiver-REKES

8716105001X (Jul.01,1993 ~ Jun.30,1994)

8716105000(Jul.01,1994 ~ )

8716105800Z : with EU regulation (Nov.30,1998 ~ Mar.29,1999)

8716105800: with EU regulation (Mar.30,1999 ~)




Tel: 82-31-610-1400

Fax: 82-31-610-3373


Printed in Korea


Page No: 6 of 6

Documents

Is b 2001004