How to turn on the built-in wireless LAN (wifi) in XS35?

Problem: When a Microsoft-based or non-Microsoft-based operating system is installed, the

built-in wireless LAN module (wifi) is not being detected or unable to scan for wireless network

(SSID).

Reason:

1) Wireless Power Control in CMOS setup is not set to ON, Switch by AP, or Always On.

2) For Windows operating system, application Control AP is not installed and launched to turn

on/off the built-in wifi.

3) For non-Windows operating system user, such as Linux or Ubuntu, Control AP is not

compatible thus it won’t install.

Solution:

1) Please make sure Wireless Power Control in CMOS setup is set to On or Switch by AP, or

Always On.

2) For Windows operating system, please make sure Control AP is installed properly and

launched to turn on/off the built-in wifi.

3) For other operating systems such as Linux or Ubuntu, BIOS is needed to be updated to version

XS35SCG.109. Please contact Shuttle technical support @ 626-820-9000 option 2 to ask for this

BIOS update emailed to you.

***BIOS update XS35SCG.109 is designed specifically for user who desires to leave the built-in

wifi powered on at all time, regardless of the type of operating system and the use of Control AP.

After updating the BIOS, an added feature “Always On” will become available in CMOS setup

and the wifi module will be ready to function at any time. ***

As seen in the illustrations below: