HHO)Catalogue.pdf · HHO Kankyo-Enertektechnology The water travels from the reservoir through the cell and then back into the reservoir.So, no water pumps are needed. The key to

We Design For The Future

www.kankyo.global

WATER & WASTEWATER TREATMENT | WASTE TO ENERGY BIOREMEDIATION | SOLID WASTE MANAGEMENT

AIR POLLUTION

- HYDROXYGENERATOR TECHNOLOGY -

HHOSustainable Innovative Technology


A century old process of electrolysis is the foundation for this technology.

Utilizing electrolysis, which is the separation of water [H20] into its components of Hydrogen and

Oxygen, is the initial step in the process.

By combining distilled water with a catalyst and introducing an electrical voltage to this solution, begins

the electrochemical process of separating water into its parts.

The separation of the molecules from H2O into HHO is the entire process.Electrolysis Process

HYDROXY GASGENERATORKankyo-Enertek technology

HHO

HHOKankyo-Enertek technology

The water travels from the reservoir through the cell and then back into the reservoir. So, no water pumps are

needed.

The key to this circulating system is the way our HHO dry cells are designed. The EnerTek HHO Dry Cell reduces the

fuel consumption over all by creating a more efficient combustion cycle.

This more efficient combustion cycle allows you to use less fuel at the same throttle setting.

Increase in efficiency lowers throttle setting for the given power production and therefore reduces fuel consumption

for traveling a given distance.

The water fuelization system converts the water into Hydroxy gas and makes thermal energy.

From the Hydroxy gas the heat generation device will convert into water energy. This flow is called Hydroxy system

energy cycle.

HHO system is composed of HHO Gas plant and Hydroxy system combustion system (boiler, furnace etc.)

*The high efficiency Hydroxy is compact and easy to operate, and specifically safe because there is not explosive

hazard like LPG gas containers.

* The Hydroxy gas is used as necessary and useful flame for every thermal process.

A CIRCULATING SYSTEM DESIGN

KANKYO GROUP OF COMPANIES | www.kankyo.global | [email protected] & Wastewater Treatment | Bioremediation | Waste To Energy | Air Pollution | Solid WasteManagement

http://www.kankyo.global/mailto:[email protected]

PURPOSE OF THE EACH COMPONENTS IN HHO



Gas outletSupplies pure form

of gas for requirement

Main water tankDistilled water for

electrolysis process is stored here.

Water should be maintained less

than 500 TDS

Water tank

Contains water to purify gas passing from diesel tank. Final stage of gas purification takes

place here.

Water level

indicatorIt indicates the level of main

water in the tank

Flow meter

Determines volume flow rate of gas

HHO Dry cell

Electrolysis process happens here by providing direct

current from rectifier

DC Rectifier

Converts AC to DC required by HHP

dry cell


HYDROXY GAS GENERATORKankyo-Enertek technology

APPLICATIONS


Hydroxy Gas mixed combustion system is the solution for environment issue and energyproblem.

If a company owns existing facility (industrial boiler, heating furnace, melting incineratoretc) the company can have Hydroxy mixed combustion system (Min 5% of total Energy) tomix and burn Hydroxy Gas with conventional fuel to solve it environment issue and energysystem. We can save 20% combustion fuel.

This plant supplies Hydroxy Gas 24 hours into the combustion chamber of existing facility.

The Hydroxy Gas is mixed with conventional fuel and burned together.

At this time, if people supply more Hydroxy Gas, fuel savings and antipollution effectbecome larger.

This new combustion technology has a merit that doesn’t have to replace or modify their existing facility.

Heat Treatment, Heavy Industry Process, Soldering, Glass Working, School, Laboratory, Brazing, Gas Welding, Gas Cutting, Slab Cutting For Steel Mill, Jewellery Working


INDUSTRIAL BOILER FURNACE



WASTE INCINERATOR


This melting incineration technology is a new technology.

Hydroxy Water Energy Incinerator system is working in high temperature pyrolysis melting

incinerator by water energy system.

It is composed and linked of Hydroxy Plant and Hydroxy Gas melting incinerator by the

unique heat generation technology of Hydroxy gas.

Its special feature is to use water energy instead of LPG or LNG in order to supply energy

for perfect combustion.

Working Principle

A combustion chamber is prepared in the incinerator and it has the most complete combustion condition of Hydroxy gas.

Combustion heat of syngas and combustion heat of Hydroxy gas make synergy each other to create high temperature of 1400-1800°C. It can melt everything and it doesn’t produce

any ash.



OTHER APPLICATIONS


Industrial Boiler

Industrial Heating furnace

Industrial Melting furnace

Waste melting incinerator

Mixed Combustion System

Jewelry working

Soldering

Glass working

Brazing

Gas cutting

Gas welding

Heavy Industry Process



•Energy from water: The thermal energy is from heat generation of water not from electricity

•Oxygen effect of water energy: Hydroxy gas is the mixture of hydrogen and oxygen in the ratio of 2:1 as water it is. Because of oxygen in nature burns the gas perfectly, it is an ideal fuel. Such an oxygen effect

makes better combustion condition to make a high temperature and heat.

•Value of oxygen: Because Hydroxy gas from water (2H+O) contains oxygen for perfect combustion. Hydroxy gas combustion apparatus does not need a blower and chimney.

•High temperature property: Water energy shows an excellent heat generation in comparison with other kind of energies because of its unique properties like implosion and thermal reaction. It can weld a brick

and an iron themselves, and the flame can drill a thick brick.

•Safety of water energy: Hydroxy energy system is composed and linked of Hydroxy Gas plant and Hydroxy gas heat generator as a system. It does not compress or store Hydroxy gas, but it burns the gas as soon

as it is generated. It makes free from the danger to explode like high pressure gases.

•Convenient of water energy: Everyone can be fully equipped Hydroxy gas plant by Water energy system. When switch on system, Hydroxy gas plant makes tap water into Hydroxy gas to supply a fuel

immediately. It is more convenient than any other fuels.

•Economical efficiency of water energy: Consumption material for Hydroxy water energy system to make water energy is only from water and electricity. The total cost of water and electricity is only 30-35% of

the cost of oil. The economical efficiency of water energy is, it saves more than 65% approximately.

•Water energy that satisfies the condition of alternative energy: In conclusion because water energy from Hydroxy water energy system is to use water as a fuel by the principle of nature itself, it is very natural

to save more than 65% when we burns water instead of oil.

•Mixture of Hydroxy Gas with Oil or Natural Gas: If we mixed minimum of 5% Hydroxy Energy (10.5 KJ/Liter) with fuel like Oil or Natural Gas Energy will save 20% total fuel saving and also reduce 30% of CO2

and NOX Emission.

ADVANTAGES OF HAVING HHO SYSTEM





OUR HHO MODELS


SMALL HHO MODELS MEDIUM HHO MODELS

HHO- 300 LPH HHO- 500 LPH

HHO- 1000 LPH HHO- 1500 LPH HHO- 2000 LPH HHO- 5000 LPH

LARGE HHO MODELS

HHO-10000 LPH HHO-20000 LPH



GLOBAL PRESENCE


HEAD OFFICENo. 11, Ayyavu Street, Ayyavu Colony, Amminjikarai, Chennai-29 Tamil Nadu, India.Tel: +91-‐44-‐2363-‐5600 Mob: +91-9150001111Web: www.kankyo.global

JAPAN OFFICEYMP Tanimachi Building 1-‐1-‐14 Izumi-‐machi,Chuou-‐ku, Osaka 540-‐0019 Japan

REGIONAL PRESENCE

Thank you

Documents

HHO)Catalogue.pdf · HHO Kankyo-Enertektechnology The water travels from the reservoir through the cell and then back into the reservoir.So, no water pumps are needed. The key to