HazardGard EVLL LED Brochure

Hazard•Gard® EVLL SeriesExplosionproof LED LuminairesClass I, Division 1 factory-sealedLED luminaire for general illumination

EngineeringSafety &Productivity

Hazard•Gard® EVLL Series LED Luminaires

2

The world’s most demanding environments need smart new

lighting ideas and innovative approaches to enhancing safety.

You need lighting that cuts the overall cost of ownership.

Lighting that improves energy efficiency and lives up to ever-

escalating environmental standards.

You need all of this innovation from a single source. It could

only be: Cooper Crouse-Hinds.

Introducing ESP solutions.

For more than 100 years,

Cooper Crouse-Hinds has exceeded

customer expectations when it comes to

new ideas and technological

advancements.

Today, as the electrical industry’s global leader for hazardous

environments, we continue to reach beyond the expected –

especially with our commitment to

ESP (Engineering Safety & Productivity).

The problem that never happens. That’s the goal behind ESP

– smarter, more powerful solutions engineering safety and

productivity in your world.

High-performance,high-brightness Hazard•Gard® EVLL LED Luminaire – brilliantlycombiningsafety, reliabilityandenergyefficiency.

Time to look at LEDs in a whole new light.

Dramatic advances in LED technology have broadened the

applicability of this type of illumination, creating an exciting

new option for hazardous, industrial and other highly

demanding locations. Compared to traditional incandescent

and HID technologies, LED light sources can deliver longer

life, enhanced energy efficiency, greater eco-friendliness,

lowered maintenance demands and equal or better quality of

light.

Innovative applications for this exciting technology are a

natural fit for us, and LED lighting solutions have rapidly

become an integral part of our vision.

You’re faced with high maintenance and operating costs withinyour petrochemical facility. In addition, frequent lamp failurespose a safety concern where continuous lighting is required.You’re tasked with identifying a lighting solution that reducesownership costs while maintaining similar or improved lightlevels.

Old Way: 300 pieces of conventional 400W probe start metal halideluminaires are installed throughout the facility, requiringfrequent change out of burned-out lamps and ballasts,resulting in high maintenance costs and ongoing safetyconcerns.

New Way:Install 175W Hazard•Gard® EVLL LED Luminaires to realize up to56% reduction in energy consumption and slash maintenancecosts associated with lamp replacement. The EVLL LED isdesigned to easily adapt to existing mounting modules for quickreplacement and ease of installation.

Benefit: Realize a potential $215K in energy and maintenance costsavings per year making the change to Hazard•Gard® EVLL LEDLuminaires. Utilize an environmentally-friendly lightsource by implementing Cooper Crouse-HindsLED technology.



3

The Hazard•Gard® EVLL Series is a perfect example ofCooper Crouse-Hinds innovation.• Improve safety and productivity • Cut overall cost of ownership• Reduce energy consumption • Meet rising environmental standards

Installation and replacement made simple

Modular design - This contractor-friendly design isideal for both new construction applications and retrofit.These luminaires use the same mounting modules asexisting Hazard•Gard® Series luminaires. The quick-connect design facilitates installation - install and wire themounting module, then screw in your luminaire. Two start Acme threadsease and reduce installation time.

NEMA 4X Rated

LED Housing Assembly - The LED housing is constructed ofdurable die cast aluminum, providing an efficient thermal path tothe heat sink assembly. The impact-resistant lens is sealed from theoutside environment and provides ingress protection against waterand dust. Multi-die LED arrays are used to provide energy-efficient,long-life white light.

Safe, reliable heat transfer

Heat sink - Enhanced heat sink designprovides safe and effective heat transferfrom the LED assembly to the outsideenvironment, ensuring low LED junctiontemperature, reliability and sustainedlumen performance.

High efficiency and lumen output

Driver module assembly - High efficiency LED drivers are designed toprovide reliable operation in even the harshest environments. Various ACand DC input voltage options are available to suit virtually any driverequirement.

Optional Color Temperatures

Warm and cool white color temperaturesavailable.

Model Equivalent HID TypicalEnergy Savings

EVLL5L 100W-150W MH

EVLL7L 150W-175W HPS/MH

EVLL9L 175W-250W MH

EVLL11L 250W-400W HPS/MH

EVLL13L 400W HPS/MH PS

4

Hazard•Gard® EVLL LED offers new solutions for old challenges.

APPLICATIONS

THE EVLL LED FAMILY LED SYSTEM

Hazard•Gard® EVLL Series LED Luminaires are designed to provide

full-spectrum, crisp, white light. Five versions of the EVLL LED are

available, providing ideal solutions for a wide range of applications.

• Five lumen outputs for replacement of existing HID luminaires

• Locations requiring continuous and consistent light levels in

extreme ambient temperatures

• Areas requiring frequent on-and-off of lights

• Where flammable vapors, gases, ignitable dusts, fibers or

flyings are present; indoors or outdoors

• Where extremely corrosive, wet, dusty, hot and/or cold

conditions exist

• NEMA 4X, marine, wet locations and hose-down

environments

• Manufacturing plants; heavy industrial, chemical,

petrochemical or pharmaceutical facilities; platforms; loading

docks; tunnels; outdoor wall and stanchion mounted general

area lighting

The Class I, Division 1 Hazard•Gard® EVLL LED product offering provides the same durability and reliability of a

traditional HID fixture, coupled with the low cost of ownership and energy efficiency of Cooper Crouse-Hinds LED

technology. High-performance LEDs and a solid-state electronic driver provide light where you need it, at a

fraction of the operating costs of HID lighting technologies.

• High brightness light emitting diode (LED) arrays

• Color temperature: 3000K (CRI 82) and 5600K (CRI 65) options

available

• Advanced heat sink design ensures LED does not exceed

manufacturer’s temperature ratings across all specified

ambient conditions

• LM-79 and LM-80 reports available


Up to 62%

Model VoltageInputAmps(Max.)

PowerFactor

InputPower

LumenOutput

EVLL5L 120-277VAC 50/60 Hz108-250VDC

0.46-1.820.38-1.89

0.99%1

80W 5625

EVLL7L 120-277VAC 50/60 Hz108-250VDC

0.51-1.110.42-1.15

0.99%1

100W 6750

EVLL9L 120-277VAC 50/60 Hz108-250VDC

0.61-1.190.56-1.30

0.99%1

130W 9000

EVLL11L 120-277VAC 50/60 Hz108-250VDC

0.76-1.560.73-1.71

0.99%1

151W 10500

EVLL13L 120-277VAC 50/60 Hz108-250VDC

0.78-1.580.75-1.73

0.99%1

175W 13500

NEC and CEC• Class I, Division 1, Groups B, C, D• Class I, Zone 1, Groups IIB + H2, IIB, IIA• Class II, Groups E, F, G (Pending)• Class III, Simultaneous Presence (Pending)

UL Standards• 844 Electric Fixture Hangers for Hazardous Locations• 1598 Luminaire• 1598A Luminaire for Installation on Marine Vessels

CSA Standard• C22.2 No. 137

Environmental Ratings• NEMA 4X• IP66• Marine and Wet Locations

IEC and ATEX Certifications and Protection (Pending)• Ex II 2G Ex d IIC (Zone 1, 2) (Pending)• Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)

5

EVLL LED BENEFITS CERTIFICATIONS & COMPLIANCES

STANDARD MATERIALS

ELECTRICAL RATINGS

Industry best for ease of installation• Quick-connect design – install and wire the mounting

module, then simply screw in the luminaire

• Factory-sealed – no external sealing fittings required in

Groups B, C, and D

• Adapter available for connection to existing Hazard•Gard®

EVI, EVLP, and EVM modules

Reduce operation and maintenance costs• Energy-efficient – up to 62% reduction in energy used

versus equivalent HID fixtures

• 60,000 hours rated life – eliminates need for frequent lamp

replacement

Reliable performance in any environment• Shock- and vibration-resistant solid-state luminaires have

no filaments or glass components that could break – greatly

reduces the risk of premature failure

• T5 temperature rating

• Operating ambient -25ºC to 65ºC

• Body and mounting modules – copper-free aluminum with

Corro-free™ epoxy powder coat

• Lens – shatter-resistant, explosionproof glass

• Gaskets – silicone

• Guard – stainless steel

• External hardware – stainless steel

• Factory-sealed*

*Refer to Installation and Maintenance Sheet for external seal requirements.



SERIESEVLL Explosionproof Vaportight Low Profile LED Luminaire

LAMP OUTPUT5L 5,625 Lumen Output7L 6,750 Lumen Output9L 9,000 Lumen Output11L 10,500 Lumen Output13L 13,500 Lumen Output

LED COLORC Cool (5600K nominal)W Warm (3000K nominal)

MOUNTING MODULEA Pendant EVSP J Stanchion EVSJBX Wall Bracket EVSW M Mounting Module Adapter EVSA (See Note #1)CX Ceiling Mount EVSC Blank No Mounting Module Supplied

HUB SIZE 2 3⁄4” NPT (Pendant, Ceiling, and Wall Only)3 1” NPT (Pendant, Ceiling, and Wall Only)5 1 1⁄2” NPT (Stanchion Only)25 25 mm (Pendant, Ceiling, and Wall Only)32 32 mm (Pendant, Ceiling, and Wall Only)Blank Leave Blank For Mounting Module Adapter and No Mounting Module

GUARD0 No Guard1 Stainless Steel

VOLTAGE (See Note #2)/UNV 120VAC to 277VAC 50/60 Hz, 108VDC to 250VDC

SUFFIXESS812 Trunnion Mount

6


CATALOG NUMBERING SYSTEM

SERIES LAMPOUTPUT

LEDCOLOR

MOUNTINGMODULE HUB SIZE GUARD VOLTAGE SUFFIXES

EVLL 5L C A 2 0 /UNV

Notes:

1. EVSA Adapter for use with existing CooperCrouse-Hinds EVI, EVLP, and EVM mountingmodules.

2. Accessory kit EVLL347/480 K1 (step downtransformer in separate enclosure) isavailable for 347V and 480V 60 Hzapplications.

PHOTOMETRICS

ZONE (DEGREES) LUMENS % OF LUMINAIRE

0-30 4221 31.7%

0-40 6923 52.1%

0-60 11630 87.5%

0-90 13500 100.0%

90-180 0 0%

0-180 13500 100.0%

Mtg.Hgt. A B C D E F

12’ 34.72 13.89 6.94 3.47 1.39 0.69

16’ 19.53 7.81 3.91 1.95 0.78 0.39

20’ 12.50 5.00 2.50 1.25 0.50 0.25

25’ 8.00 3.20 1.60 0.80 0.32 0.16

7


ISOFOOTCANDLE CHART Footcandle Values for Isofootcandle Lines

DISTANCE TO MOUNTING HEIGHTIsofootcandle chart shows illuminance in

footcandles at ground level(EVLL13LCA20/UNV1)

LuminaireSeries

SystemWatts Lumens

EVLL5L 80W 5625EVLL7L 100W 6750EVLL9L 130W 9000

EVLL11L 151W 10500EVLL13L 175W 13500

LUMEN OUTPUT FOR OTHER EVLL LED LUMINAIRES


POLAR PLOT CANDELA(EVLL13LCA20/UNV1)

A B C D E F

3

2

1

0

-1

-2

-3-3 -2 -1 1 2 30

DIMENSIONS (INCHES)

Printed in USA

Cooper Industries, Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www.cooperindustries.com

5039-0412


[104]4.09

[91.3]3.59

[366.2]14.42

[391.6]15.42

[414.4]Ø 16.32

Pendant Mount )

[404.8]Ø 16

[80.2]3.16

[414.4]Ø 16.32

[342.4]13.48

[367.8]14.48

[334.5]13.17

Ceiling Mount )

[459.5]18.09

[407.7]16.05

[341.9]13.46

25°

[454.6]17.90

[241.5]9.51

[378.4]14.90

[353]13.90

[345.2]13.59

[407.6]Ø 16.05

Wall Mount )

4

Stanchion Mount )

EVJ2EV22EV33

EVMP2EVMP3EV22

EV33

EV87 EVMJ4

EVSP2EVSP3EVSP25EVSP32

EVSC2 EVSC25EVSC3 EVSC32

EVSA

EVSW2EVSW3

EVSW25EVSW32

EVSJ5

FAMILY TREE

Model Lbs.EVLL5L 51.76EVLL7L 51.81EVLL9L 52.38EVLL11L 53.00EVLL13L 53.00Add Mounting Modules:Pendant 2.0Ceiling 3.5Stanchion 3.0Wall 5.5Adapter 2.0

WEIGHTS

ModelMax.

AmbientTemp.

ºC

Cl. I,Div. 1

Cl. II, Div.1 & 2 /Simu.

Presence

Cl. I,Zone 1

EVLL5L40 T6 Pending Pending55 T6 Pending Pending65 T5 Pending Pending



EVLL11L40 T6 Pending Pending55 T6 Pending Pending

EVLL13L40 T6 Pending Pending55 T6 Pending Pending

AMBIENT TEMPERATURE


For more information, please contact us at www.crouse-hinds.com/contactus

Documents

HazardGard EVLL LED Brochure