GUEST LECTURE - G. H. Raisoni College of Engineering Nagpurghrce.raisoni.net/TEQIP/VATAYANI JULY 15(1).pdf · Guest Lecture on "Research &carrier opportunity in automotive industry”

VATAYANI

GUEST LECTURE

Guest Lecture on “Composite Materials” Under ASME Student Chapter for B.E. V

semester (Section-B) Mechanical Eng.

Invited talk on “Composite Materials” by Mr.

Swapnil Nandanwar, Assistant Manager, TAL

Manufacturing Solutions Limited, Buttibori MIDC,

Nagpur was organized by ASME Student Chapter,

Department of Mechanical Engineering, G. H

.Raisoni College of Engineering, Nagpur

on08/07/2015.

Mr. Swapnil Nandanwar, during the talk,

covered the basics of Manufacturing processes, in

that he has given various examples of industry on

forming processes. The main focus of lecture was

composite materials and its applications in Aviation

industries. His valuable experience in this area was

helpful to get insight of the effects of materials used

for different applications such as airplane and

turbines. Information provided to the students are

also useful for pursuing their further research in this

upcoming area of Composite materials and its uses.

With his vast experience in Aviation Industry, he

also explained manufacturing process of some of the

airplane models. He had interaction with the

students and has given valuable guidelines to them

about the welding technology and material selection

for different uses. Students of Fifth Semester

(Section-B) B.E. Mechanical Engineering were

present and highly benefitted to carry out the work

in this emerging area.

Guest Lecture on “Advance Materials” Under ASME Student Chapter for B.E.

Vth semester (Section-C) Mechanical

Engineering

Invited talk on “Composite Materials” by Mr. Swapnil Nandanwar Assistant Manager, TAL

Manufacturing Solutions Limited, Buttibori MIDC,

Nagpur) was organized by ASME Student Chapter,

Department of Mechanical Engineering, G. H.

Raisoni College of Engineering, Nagpur on

08/07/2015. Mr. Swapnil Nandanwar, during the

talk, covered the basics of Manufacturing processes,

in that he has given various examples of aerospace

industry on forming processes. The main focus of

lecture was composite materials and its applications

in Aviation industries. His valuable experience in

this area was helpful to get insight of the effects of

materials used for different applications such as

airplane and turbines . With his vast experience in

Aviation Industry, he also explained manufacturing

process of some of the airplane models.

Department of CSE has organized Guest

lecture on Data Structure using C

JULY 2015 Edition

A news letter for TEQIP-II

Name of Expert: Dr. U.A. Deshpande

Designation & Affiliation: Professor,VNIT, Nagpur

Topic: “Data Structure Using C”

Venue: D-20

Date & Time of conduction: 08/07/2015 at 3:30pm

Description of the Event:

Participants: UG 3 SEM CSE B

No. of Participants: 78 students


lecture on Operating System

Name of Expert: Prof. Ashish Tiwari

Designation & Affiliation: Assisstant Professor,

VNIT, Nagpur

Topic: “Operating System”

Venue: D-21

Date & Time of conduction: 24/7/2015 9.30 AM


Participants: UG 5 SEM CSE A&B



lecture on Micro-based Systems

Name of Expert: Dr. S.V. Ratkhantiwar

Designation & Affiliation: Associate Professor,

YCCE, Nagpur

Topic: “Micro Based System”

Venue: S-03

Date & Time of conduction: 24/7/2015 9.00 AM


Participants: UG 3 SEM CSE A &B



lecture on Wireless Communication

Name of Expert: Mr. Ajay Sawatkar

Designation & Affiliation: Assistant Manager,

BSNL, Nagpur

Topic: “Wireless Communication”

Venue: S-03

Date & Time of conduction: 25/7/2015 11.00AM


Participants: UG 7 SEM CSE A &B


Guest Lecture on “Degrees of Freedom” Under ASME Student Chapter for B.E.

IIIrd semester (Section-A) Mechanical

Engineering

Invited talk on “Degrees of Freedom” by Mr. D. P. Mukharjee Ex. A.G.M. Ordanance Factory

Ambajhari, Nagpur was organized by ASME

Student Chapter, Department of Mechanical

Engineering, G. H .Raisoni College of Engineering,

Nagpur on 27/07/2015. Mr. D. P. Mukharjee, during

the talk, covered the basics of Kinematics of

machines, in that he has given various examples of

industry on relative motions and its degree of

freedom of various machine elements. The main

focus of lecture was degree of freedom and its

importance in Artillery, Ammunition and Missiles

industries. His valuable experience in this area was

helpful to get insight of the effects of kinematics

used for different applications such as missile and

small arms. Information provided to the students is

also useful for pursuing their further research in this

upcoming area of kinematics and its uses. With his

vast experience in missile and weapon Industry, he

also explained manufacturing process of some of the

missile shells. He had interaction with the students

and has given valuable guidelines to them about the

Rockets and Rocket launchers.

Invited talk on “Material Engineering”

for III semester (Section B & D)

Invited talk on “Material Engineering” By Dr. Dilip Ganguly, Ex-Additional General Manager,

Indian Ordnance Factories Service (IOFS), Nagpur

was organized by department of Mechanical

Engineering, G.H. Raisoni College of Engineering,

Nagpur on 28/07/2015. Dr. Dilip Ganguly during the

talk covered the important aspects of Material

Engineering. He has explained many important

topics related to material in his talk. He shared his

valuable experience in this area with the students.

Students of third semester B.E. Section B& Dwere

present and highly benefitted to carry out the work

in this area.

CSE department has organized

Guest Lecture on “Recent trends in Cyber Security”, by Mr. Ashish Handa.

Computer science engineering of G. H. Raisoni

College of Engineering has organized Guest Lecture

on “Recent trends in Cyber Security”, by alumni Mr. Ashish Handa for Seventh semester and ME and M

Tech First and Third Semester students on date 29

July 2015.Total sixty students are present at Guest

lecture.

Mr. Ashish Handa is Founder CTO, Managing

Director at GenXCoders, Nagpur. GenXcoders

established in 2008 providing Cyber Security

consultation to Nagpur Police, Cyber Crime

Department, ATA Mumbai, Special Cell Delhi and

Central Command of Indian Army Jabalpur. His

Company provides ERP solutions for education

sectors, has twenty seven products of his own, He

has an advertisement portal by the name

www.clickMeindia.com. His company provides

training and internship to engineering students. His

company is launching soon state wide and the

nationwide portal for medical services by the name

www.FindUrDoc.in. He has his head offices at

Nagpur, Corporate Branch offices at Amrawati,

Pune, Mumbai, Jabalpur, and Ranchi. Guest lecture

is scheduled for seventh semester and all M Tech I

& III semester Branch student. He has given deep

and detail information about recent trends in Cyber

security and its worldwide application.

Guest Lecture on "Research &carrier

opportunity in automotive industry” for M.Tech. Heat Power

The department of Mechanical Engineering of

G.H.Raisoni College of Engineering Nagpur has

organized guest lecture on "Research &carrier

opportunity. in automotive industry "on

29/07/2015.Guest Lecture was mainly aimed at

upgrading the knowledge on research area and

carrier opportunities, The guest lecture was

delivered by Mr. Niraj Tiwari, Sr. manager, Engine

section, Mahindra & Mahindra Nagpur. He explains

research in engine design and its importance in

present scenario.

Head of the department Dr. P. V. Walke , Prof

S.R.Karale ,Prof V,W,Khond were present along

with students of M.Tech of I and III semester.

Department of Civil Engineering of G. H.

R. C. E., Nagpur has organized a Guest

lecture on “Advances in Water Treatment” by Dr. A.R. Tembhurkar under the banner of Indian Concrete

Institute (ICI) for Fifth Semester Students

Department of Civil Engineering of G. H. R. C.

E., Nagpur has organized a Guest lecture on

“Advances in Water Treatment” under the banner of Indian Concrete Institute (ICI) on 31

th July, 2015.

The invited guest speaker was Dr. A.R. Tembhurkar

, HoD (Civil) Engg. Dept.,VNIT, Nagpur. It was

organized under the banner of Indian Concrete

Institute, student chapter.Students of Fifth semester

section A & B were present for the guest lecture for

subject Environmental Engineering-I .Students

were benefited greatly. Dr. P. Y. Pawade was

instrumental in arranging the program along with

Prof. Isha P. Khedikar, Prof. S.P. Abhyankar and

Prof. S.C.Ambatkar faculty members of Civil

Engineering Department.

Workshop/ STTP

Short Term Training Programme

on

'TOTAL QUALITY MANAGEMENT’ Organized by Mechanical department

Mr. A. B. Pandey addressing the gathering. Seated

on dais, from right to left, are Dr. V. M. Kriplani,,

Dr. P. V. Walke and Dr. D. J. Tidke.

A Short Term Training Programme on 'Total

Quality Management’ was organized by the Department of Mechanical Engineering of G. H.

Raisoni College of Engineering, Nagpur during 15th

– 19th June, 2015 under Technical Education

Quality Improvement Programme (TEQIP-II) of the

Govt of India. The STTP was inaugurated at the

hands of Mr. A. B. Pandey, President of NECO

Group of Industries, Nagpur on 15th June, 2015.

Dr. P. V. Walke, Head of Department of Mechanical

Engineering, GHRCE presided over the function.

Seated on the dais also were, Dr. D. J. Tidke, the

STTP Coordinator & Dr. V. M. Kriplni, Professor of

Mechanical Engineering.

Initially Dr. D. J. Tidke welcomed the delegates

and the guests and highlighted the scope of the

STTP and its relevance in the modern competitive

world. Mr. Pandey, during inaugural speech,

highlighted the strategic importance of

manufacturing excellence in today's business

environment and expected that a common forum of

academia and industry practitioners would bring

about significant changes in the present

manufacturing scenario. He shared his experiences

from steel making and foundry sectors and stressed

that excellence is crucial to survival of

manufacturing units in today’s competitive business world. He dwelt on various aspects of manufacturing

excellence and managing quality keeping in view the

needs of customer. He pointed out that the quality is

not achieved by accident but is the end result of

collective efforts of all in every organization. He

also appreciated the initiative taken by G.H.R.C.E.

in bringing together the academia and the industries

to provide real experiences in Total Quality

Management and learn from each other’s experiences. He pointed out that the quality is not

achieved by accident but is the end result of

collective efforts of all in every organization.

Dr. Walke, in his presidential address, informed

the participants about various academic and student

centric developments which have taken place at the

Institute in the recent years. He also highlighted the

research and patenting activities in progress and the

sweeping changes in the academic accreditation

process under NBA. He urged the participants to

adapt to the rapidly changing demands of outcome

based education and choice based credit system

being the need of the time.

The STTP witnessed interesting presentations

of quality management techniques, success stories

and case studies by Mr Amol Joshi, Dy. General

Manager, Mahindra & Mahindra Limited, Nagpur,

Mr. Milind Joshi, Environmental Management &

Engineering Consultant, Dr. Ramesh Lakhe of

Shreyas Quality Management Systems, Nagpur, Dr.

V. S. Deshpande, Professor of Industrial

Engineering at Ramdeobaba College of Engineering

& Management, Nagpur, Dr. R. L. Shrivastava,

Professor, YCCE, Nagpur, Dr. A.P. Kedar, Professor

of Mechanical Engg at NYSS’s College of Engineering, Nagpur, Mr. A. Chakraborty, a very

senior quality and HR professional and presently

Advisor- Group Corporate Affairs & Chief HRM &

Business Excellence at Murli Cement Industries.

The participants had a very educative industry visit

to Mahindra & Mahindra Limited, Nagpur. This

enabled the participants to appreciate the quality

issues and shop floor problems related to quality

management in manufacturing and application of

modern quality management tools such as quality

circles, pokayoke, Kaizen, 5S and so on.

A total of 18 faculty members from of

engineering colleges, polytechnics and a few

research students from different parts of the

Maharashtra attended the STTP. Dr. Tidke proposed

a formal vote of thanks.

Department of Computer Science &

Engineering has organized two days

workshop on LATEX

Department of computer Science & engineering

of G.H.Raisoni College of Engineering ,Nagpur

conducted Two days workshop on “LATEX “ from 6th to 7th July 2015 .The workshop was conducted

by Prof.S.K.Pillai, Prof.S.U.Nimbhorkar and

Prof.A.R.Raut. This workshop was conducted for

final year students’ .The main objective of organizing this workshop was to make them aware

about the document preparation system for

producing professional-looking documents including

journal papers and thesis. Special thanks to HOD

CSE, Dr.L.G.Malik for her constant support and

motivation for organizing such an event.

GHRCE -Department of Computer

Science & Engineering organized one day

work shop for V semester student on

Virtualization and Networking by IT-

NetworkZ

Experts Mr. Saurabh Sadawarti & Sachin M .

Department of Computer Science and

Engineering organized one day work shop on

23/7/2015 for V semester student on Virtualization

and Networking by IT-NetworkZ.

Resource person for the workshop was Mr

Saurabh Sadawarti (Sr. Training Manager) & Sachin

M (Trainer), Ms Hemlata J & Divender Kaur.First

session of workshop conducted by Mr Saurabh

Sadawarti (Sr. Training Manager) & Sachin M

.Topics covered in first session are servers and its

types, Network Engg, Server Engg, Virtualization

Network Topology, WAN connectivity, Data Centre

overview, Cloud and its Types, Advantages of

Virtualization. Second Session was a Lab Session

conducted by Ms Hemlata J & Divender Kaur. They

demonstrated different .NET technologies and Built

in functionalities. Student learns different practical

ways to write coding as well as different Concept of

Virtualization and Networking and way to handle

Built in Functionalities in .NET Framework.

Experts Ms Hemlata J & Divender Kaur shares

Practical Knowledge to Students

TECHNICAL ACTIVITIES

Prof.P.H.Rangaree from Electronics

Department attended QEEE Training

program during 25th to 26th June 2015 at

IIT MADRAS

IIT MADRAS conducted a two day QEEE

training workshop on ''Digital Signal Processor and

Application (DSP) lab" for the coordinators all over

India. The training was scheduled from 25th to 26th

of June 2015.The main purpose of this training was

to explain the faculties how to work on Blackfin

processor with some examples. Along with this, they

explained about Eclipse software, its working and

installation. Prof. Anand and Prof. Mohan was the

resource person for the workshop. Course pack was

already given to the faculty members Faculties from

all over India participated in the workshop.

Based on the training, a seminar was delivered

by Prof. P. H. Rangaree in PG lab of Electronics

Department to share the knowledge and experience

based on the training attended. It was scheduled on

3rd July 2015. Around 40 faculty members and

M.Tech. Students of Electronics engineering

department were present for the seminar.

PG counseling and orientation program

organized by electrical department for

M.Tech. (first sem) IPS and PED Students

The department of Electrical Engineering

conducted a PG counseling and orientation program

for M.Tech. first sem students on 2nd

July 2015.The

head of the department Dr. Prema Daigavane

welcomed the students and also gave a

presentation on teaching scheme and highlights of

the program. The concerned faculties gave a

presentation on their respective subjects. The

students were then taken on a tour around the

campus and department laboratories. The program

was coordinated by Prof R.Adware.

Project Topic Identification Seminar

conducted for 3rd Semester M. Tech.

Environmental Engineering Students in

Civil Engg. Dept. at GHRCE, Nagpur

Project Topic Identification Seminar was held on

3rd July 2015 for M. Tech. Environmental

Engineering 3rd

Semester students of Civil

Engineering Department in departmental library (F-

15). All students were present and presented the

seminar on the chosen topic. The committee experts

were Dr. P. B. Nagarnaik, Prof. M. P. Bhorkar, Prof.

I. P. Khedikar, & Prof. B. J. Godboley who

suggested the certain modifications & correction in

the title of project. Four students are going to

perform their project in the industries with good

industrial exposure were performed well in the

seminar

.

Project Topic Identification Seminar

conducted for 3rd Semester M. Tech.

Structural Engineering Students in Civil

Engg. Dept. at GHRCE, Nagpur

Project Topic Identification Seminar was held on

3rd July 2015 for M. Tech. Stuctural Engineering 3rd

Semester students of Civil Engineering Department

in departmental library (F-15). All students were

present and presented the seminar on their topic. The

committee experts were Dr. P.Y.Pawade, Prof.

K.R.Dabhekar, Prof. H.G.Sonkusare, Prof.

S.S.Sanghai, Prof. P.B.Patil, Prof. V.K.Gajghate &

Prof. D.S.Padole who suggested the certain

modifications & correction in the title of project.

Department of Electronics Engineering

Organized Ph.D Pre-Submission Seminar

of ETRX Ph.D Scholar Ms. Megha

Chakole


Organized Ph.D Pre-Submission Seminar on

Strategies for Performance Evaluation of Wavelet

Packet Modulation in Wireless Adhoc Networks on

03/07/2015, Under TEQIP-II.

Dr. Abhay Karandikar From IIT, Bombay Was

the Expert For Ph.D Pre-Submission Seminar. The

Research Area of Dr.Abhay Karandikar is Wireless

Communication. The Research topic is helpful in

understanding new concept of Wavelet Packet

Modulation in Wireless Adhoc Networks. After that

group discussion was took place in which all doubt,

and queries of Various Ph.D Research Scholars and

Post Graduate students was solved.


Organized Ph.D Pre-Submission Seminar

of ETRX Ph.D Scholar Mr. Rajesh

Agrawal & Mrs.Soni Chaturvedi


Organized Ph.D Pre-Submission Seminar on

“Advance Techniques For Classification of Remotely sensed Images” & “Reconfiguration of Spiking Neural Network For optimization With

Application to image Processing” for ETRX ph.D Scholar Mr.Rajesh Agrawal & Mrs.Soni Chaturvedi

on 13/07/2015, Under TEQIP-II.

Dr. Prabhir Kumar Biswas From IIT, Kharagpur

has the Expert For Ph.D Pre-Submission Seminar.

The Research Area of Dr. Prabhir Kumar Biswas is

Image Processing & Signal Processing. The

Research topic is helpful in understanding new

concept of Image processing. After that group

discussion was took place in which all doubt, and

queries of Various Ph.D Research Scholars and Post

Graduate students was solved.

Alumni from foundation batch of

Electronics Engineering of G.H. Raisoni

College of Engineering, Nagpur visited

department.

Alumni from foundation batch of Electronics

Engineering of G.H. Raisoni College of

Engineering, Nagpur visited department on 6th

July

2015. Mr. Riyaz Mulla, Sub Divisional Engineer at

BSNL, Pune & Mr. Rahul Gudadhe, Founder and

CEO at BALLOONATION.COM, New Delhi

interacted with final year students. Very practical &

interactive talk was given by them about career &

stress handling in life. This was self service offered

by these alumni in memory of one of their classmate

Mr. Kishor Zode who recently died because of

cancer. The overall event was guided by head of the

department Dr. S. S. Dorle & Prof. A. D. Tete

Mechanical Engineering Department team

“Prime Racing’ Participated VIRTUAL BAJA- 2015 Competition at Chitkara

University Chandhigarh

The department of Mechanical Engineering

students have been participated in SAE organized

VIRTUAL BAJA COMPETETION (Car making

Competition of SAE INDIA ) at Chiitkara

University , Chandigarh on 10th

and 11th

Julyt2015 , Student of Mechanical Dept. have

represented SAE Collegiate Club GHRCE Nagpur

by the name of Team Prime Racing in this

competition. Team member Mr. Sanket Bante ,

Miss Riya Meghnani , Shubham Katait , Vaibhav

Lothe, Chetan Sharma .have been represented

GHRCE team in this event. In this event all over

India 340 reputed college was participated out of

them Finally 149team was qualify for the final

BAJA-2016 , which will held at NTRIP track SEZ

Prithampur, Dist Indor,( M.P) in feb-2016.

Unfortunately Team Prime Racing was not a part of

this event due to less mark, In the highly prestigious

car making competition in automobile sector.

The team members of Team Prime Racing was

developed Virtual design of car as per the

guideline provide by BAJA SAE INDIA under the

able guidance of Prof. Nilesh Awate, Faculty

advisor, SAE Collegiate club GHRCE Nagpur .and

Prof. A.D. Pitale Additional Faculty advisor, SAE

Collegiate club GHRCE Nagpur.

The student member of Team Prime Racing has

been given credit of represent of GHRCE team in

this mega event to Dr. P.V.Walke ,HOD ,

Department of Mechanical Engineering, Prof. K.D.

Joshi, Dean Industry Relation and Dr. P.R. Bajaj ,

Director GHRCE Nagpur.

Project title finalization seminar of

Electrical VII Semester students

The students of seventh semester Electrical

Engineering are doing a six months industrial

internship all over India as part of their curriculum.

The aim of this internship is to train our students on

working environments of corporate and industries.

The students are required to give a seminar on title

finalization regarding their final year project. Since

many students are out of Maharashtra the seminar

were conducted online on Skype on 13th july 2015

,others gave the seminar offline.The seminar was

reviewed by Dr V.K.Chandrakar and

Dr.S.G.Tarnekar

Seminar on industry internship (MTech

III Sem IPS) organized by Electrical

department

On 13th

july ,the M’tech IPS second year students gave a seminar on industry intern ship. The

students had done a 30 days internship in various

industries across vidharbha were they got hand on

experience in work culture of industries. The

students got trained in many technical and soft skills.

The seminar was coordinated by PG incharge Prof.

J.G. Chaudhari and Prof. R.H. Adware under the

guidance of head of the department Dr. Prema

Daigavane. The seminar was also reviewed by Dr

V.K.Chandrakar and Dr.S.G.Tarnekar

Research and Recognition Committee

Meeting for M. Tech. (Environmental

Engineering) conducted at Civil Engg.

Dept., GHRCE, Nagpur

A RRC Meeting is held for M. Tech.

Environemtnal Engineering at Civil Engg. Dept. at

GHRCE, Nagpur on 16-7-2015. 10 studetns

presented their presentation of the proposed reseach

work.

During the seminar Dr. A. G. Bhole was an

external expert, Dr. U. W. Wankhede, Dean R & D,

Dr. P. Y. Pawade, Head of Civil Engg. Dept. and

Prof. A. Thomas, Dean PG were present. Students

presented their presentation in front of committee.

Committee has given certain suggestions and

corrections in title as well as in methodology of the

proposed work to the students. Alongwith

suggestions Dr. A. G. Bhole gave the fruitfull

guidance to all students during seminar.

Students get benefited for their work due to the

committees suggestions. At the time of seminar prof.

M. P. Bhorkar, M. Tech. Coordiantor (Env. Engg.),

Prof. I. P. Khedikar, Prof. B. J. Godboley were also

present.

Research and Recognition Committee

Meeting for M. Tech. (Structural

Engineering) conducted at Civil Engg.

Dept., GHRCE, Nagpur

The RRC Meeting is held for M. Tech.

Structural Engineering at Civil Engg. Dept. at

GHRCE, Nagpur on 16-7-2015. 13 studetns

presented their presentation of the proposed reseach

work.

During the seminar Dr. R.K.Ingale Professor

VNIT,Nagpur was an external expert, Dr. U. W.

Wankhede, Dean R & D, Dr. P. Y. Pawade, Head of

Civil Engg. Dept. and Prof. A. Thomas, Dean PG

were present. Students presented their presentation

in front of committee. Committee has given certain

suggestions and corrections in title as well as in

methodology of the proposed work to the students.

Alongwith suggestions Dr. R.K.Ingale gave the

fruitfull guidance to all students during seminar.

Students get benefited for their work due to the

committees suggestions. At the time of seminar Prof.

K.R.Dabhekar, M. Tech. Coordiantor (Structural

Engg.), Prof. H.G.Sonkusare, Prof. S.S.Sanghai,

Prof. V.K.Gajghate, Prof. P.B.Patil, Prof.

D.S.Padole. Prof. N.H.Pitale were also present.

Ph.d progress seminar organized by

Elecrical department

On 20th july 2015 Ph.d progress seminar was

conducted for the Ph.D registered students. The Ph.d

students were accompanied by their guides during

presentation .The Presentation was reviewed by the

head of department Dr. Prema Daigavane. The

seminar was also reviewed by Dr.H.M.Suryawanshi,

Dr.Kale and Dr.Aware .Dr V.K.Chandrakar ,

Dr.S.G.Tarnekar were present.

FORUM and Professional Society Activity

Committee installation in Civil

Engineering Department GHRCE,

Nagpur

FORUM installation in Civil Engineering

Department is done on 22-7-2015 (Wednesday) by

the hands of Dr. P. Y. Pawade, Head of Department,

Dr. B. V. Khode, Professor, Prof. M. P. Bhorkar,

Forum In charge and Prof. V. K. Gajghate Forum

Co-incharge at HoD Cabin, Civil Engg. Dept.

Dr. P. Y. Pawade & M. P. Bhorkar congratulate

the committee members and given a technical

guidance regarding all activities to be conducted in

this academic year 15-16. All committee members

are informed to carry out all the activities in very

smooth and successive manner. Dr. B. V. Khode has

done appeal to committee members to perform well

in the forthcoming mega event, STTP on Disaster

Management from 27th to 31st July 2015. Prof. V.

K. Gajghate Gajghate guided them to prepare the

documentation of each & every activity.

Installation programme of Solar Energy

Society of India (SESI)

Department of Mechanical Engineering has

organized an installation programme of office

bearers of Solar Energy Society of India (SESI) on

24-07-2015(Friday). Mr.Bhushan Behade was

elected as a President, Mr.Rahul Pandey as a Vice

president, Mr.Mayur Dhandge as a secretary,

Mr.Raunak Suryawanshi as joint secretary and

Mr.Amit Mane as a treasurer.

Guest for the programme were Dr. D. J. Tidke

and Dr. V. M. Kriplani, Professor in Mechanical

Engineering Department. HoD Dr. P. V Walke

guided the students about the importance of SESI

and activities to be conducted in the department

under the banner of SESI. All students members of

SESI and faculty members of Mechanical Engg

Department were present in the programme.

Mr.Abhishek Raj anchors the program me and

proposed a vote of thanks.

Installation of Mechanical Engineering

Forum

On 25th

, July the Installation programme of new

Forum was organized by the department. Various

delegates were present at the time of installation. Dr.

P. V. Walke, HOD Mechanical Department, Dr. D.J.

Tidke, Dr. Kriplani, Prof. V.N. Bhaiswar , Prof. A.

S. Raut,rof. K.S.Chaudhari, Prof. Kshirsagar, Prof.

Harshlata and other faculties of Department were

also present there. Dr. Walke had guided students

and gave the new ideas about the activities which

would be going to conduct throughout the session.

RRC Meeting organized by Mechanical

Engineering Department for M.Tech

(Heat Power Engineering)

The department of Mechanical Engineering of G.

H. Raisoni College of Engineering, Nagpur has

organized a RRC Meeting for M.Tech (Heat Power

Engineering) on 29/07/2015. Students from M.Tech

III Heat Power Engineering called for present their

work in front of External expert for finalization of

project topic. Dr.D.B.Zodpe, Associate Professor,

VNIT, Nagpur was expert and gives valuable

suggestion and made minor correction in titles.

INDUSTRY VISISTS

Mechanical department has organized

industry visit to “Shivam Parle-G Biscuit

Factory, Umrer Road, Nagpur”

The Department of Mechanical Engineering of

G. H. Raisoni College of Engineering Nagpur has

organized Industrial Visit at Shivam Parle-G Biscuit

Factory, Umrer Road, Nagpur for B.E. Fifth

semester Section –A students on 04/07/2015. Mr.

Petkar, Plant visit in-charge helped us for organizing

this industrial visit & has given brief information

about the company. Shivam Parle-G Biscuit Factory

is a part of Parle-G industries. Basically Shivam

Parle-G Biscuit Factory produces only parle-G

biscuits out of many products of parle like poppins,

kismi, mango bite etc.

The student of V semester Section –A along with

Prof. K. S. Rambhad, Prof. R. A. Jibhakate, Prof. A.

A. Raut and Prof. H. S. Rewaskar visited the

company at 11.00 AM. Mr. Petkar has shown video

of different process in the auditorium at start and

given the brief information about the various

operations carried out at company.


R. C. E., Nagpur has organized a site visit

to Water Treatment Plant under the

banner of Association of Consulting Civil

Engineers (India)

Department of Civil Engineering. of G. H. R. C.

E., Nagpur has organized a site visit to Water

Treatment Plant, MIDC, Hingna , Nagpur under the

banner of Association of Consulting for Civil

Engineers (India) for fifth semester (Section B) on

11th July ,2015.The students were able to

understand the water treatment process and it’s working in the real life. All the water treatment

process like initial pumping of water from Ambazari

lake, aeration , coagulation , flocculation ,

sedimentation , filtration , disinfection and pumping

to the ESR were explained to the students a plant

Engineer Mr. Pusatkar .

It was very beneficial visit for students and

enhanced their knowledge regarding water treatment

processes in the subject Environmental Engineering-

I . 67 students were present in this visit. Head of

Department Dr.P.Y.Pawade was provided the

necessary guidance. The site visit is executed by

Prof. Isha P.Khedikar, Prof. H.G. Sonkusare and

Prof. S.C. Ambatkar Asst Prof. from Civil

Engineering. Department.

Students of B.E. Third semester /Section B

(Electronics) visited Sonali Power

Equipment Pvt. Ltd.

Graduate Students of B.E. Third semester

electronics had visited to Sonali Power Equipment

Pvt.Ltd, 38, Surendra Nagar, Hingna MIDC at

Nagpur, on date 11th

July 2015. The main aim is to

provide students a glimpse of the actual work

situation and to understand the industry

environment, to study the production of product

manufactured, to get a first hand information about

the operative system , machines and procedure

adopted by industries in practice and to gain some

work experience. Mr. Vijay Sontakke, Manager, has

provided necessary information to student about the

procedure of manufacture of different types of step-

down transformers ranging from 25 kW to 200 kW

and the visit has successfully done. Visit is

organized by Department of Electronics

Engineering, GHRCE, Nagpur. Prof. P.M.Ghutke &

Prof. Akshita Baisware accompany to the students

in the visit.

Industrial Visit at “MM Boring Works”

organized by mechanical department

On July 11, 2015 G.H. Raisoni College of

Engineering, Nagpur organized an industrial visit at

MM Boring Works Near Gandhi Sagar Lake,

Gandhibagh Nagpur for students of Third semester

section-D. Mr. Sushil Sharma, Officials of “MM Boring Works” given brief information about the overall functioning of various departments and

machines such aslathe, crank shaft grinding, boring,

drilling, crank metalizing and honing etc

The main functioning is boring the cylinder head

and piston linings. Reconditioning & maintenance

shop & safety practices performed in company.

Company manufacture and repair the automobile

parts. The students entered into shop floor with Mr.

Patil. Total 30 students from III-D semester

Mechanical Engineering along with three faculty

members Prof. P. P. Kudale (Class Incharge III-D

semester), Prof. H. S. Rewaskar and Prof. A. Dhere

visited the industry.


Industrial Visit to HEAT TREAT WELL,

MIDC, NAGPUR

The department of Mechanical Engineering of G.

H. Raisoni College of Engineering Nagpur has

organized Industrial Visit to “HEAT TREAT WELL, MIDC, NAGPUR”, for students of third

semester B.E. Mechanical sec.-A , on 21th July’15.

Mr. A. Umathe, Sr. Engineer of HEAT TREAT

WELL, MIDC, NAGPUR given brief information

about the overall plant and various departments. He

has explained various heat treatment processes like

Annealing, normalizing, quenching, hardening,

tempering. Mr. Umathe explained the heat treatment

process for tractor trolley attachment in detail in

which he explains the importance of nitride solution

and quenching processes. The company performs

heat treatment to the various components like

tractor- trolley attachment mechanism, gear blanks,

truck bumpers etc, according to the order given by

various companies.

Overall 66 students along with four faculty

members Prof.S. S. Kumbhalkar and Prof. A.

Getme, Prof. A. Wanker, Prof. N Ambule visited the

industry for studying the practical application of the

subject.


Industrial Visit to KINETIC GEARS,

MIDC, NAGPUR

The department of Mechanical Engineering of

G.H.Raisoni College of Engineering Nagpur has

organized Industrial Visit to “KINETIC GEARS, MIDC, NAGPUR.”,for students of third semester B.E. Mechanical sec.-A , on 21

th July’15. Mr. VishramJamdar ,Officer of KINETIC

GEARS, MIDC, NAGPUR. given brief

information about the overall functioning of various

department, like Production, Quality control,

Purchase etc. In production, he explained how the

gear is manufacture in which he explains the

procedure of hobbing tool fixing in CNC machine

and program generation for gear teeth cutting.

Students have seen different manufacturing

processes like turning, threading, broaching,

hobbing process. The company’s main products aregears and supplementary parts of gearbox of

different vehicles, like cars, trucks etc,.

Overall 66 students along with four faculty members

Prof.S. S. Kumbhalkar and Prof. A. Getme, Prof. A.

Wanker, Prof. N Ambule visited the industry for

studying the practical application of the subject.



to Girls/Boys Hostel at Lata Mangeshkar

Hospital the banner of Association of

Consulting Civil Engineers (India)

Department of Civil Engineering. of G. H. R. C.

E., Nagpur has organized a site visit to Girls/Boys

Hostel at Lata Mangeshkar Hospital, Hingna ,

Nagpur under the banner of Association of

Consulting for Civil Engineers (India) for fifth

semester (Section B) on 24th July ,2015.The

students were able to understand the basic concept

of planning and designing of RCC structures. All

components of building such as beam, column, plan

area, recreational area, kitchen, Dining, lavatory area

were explained to the students Engineer Mr.

Ganorkar. Permission given for this site visit by

Sachin Dhote Executive Engineer (NKP Nagpur).It

was very beneficial for students and enhanced their

knowledge regarding building planning and RCC

structures in the subject of Building design and

drawing and Structural design –I 53 students were

present in this visit. Head of Department

Dr.P.Y.Pawade was provided the necessary

guidance. The site visit is executed by Prof. H.G.

Sonkusare from Civil Engineering Department.



to Nagpur Metro Rail Corporation,

Nagpur under the banner of Association

of Consulting Civil Engineers (India)

Department of Civil Engineering of G. H. R. C.

E., Nagpur has organized a site visit to Nagpur

Metro Rail Corporation, MIDC, Hingna, Nagpur

under the banner of Association of Consulting for

Civil Engineers (India) for Third semester (Section

A & B) on 25th

July, 2015.The students were able to

understand the process of soil treatment and soil

sample collecting for test on soil by using hydraulic

machine for standard Procter test. The cylindrical

cores of standard volume, 13cms long and 10cms

diameter, they have a sharpened edge at one end to

improve penetration of the soil surface. These cores

are driven fully into the surface to be tested; they are

removed from the ground without disturbing the

core contents. In the laboratory they are cut flush top

and bottom and weighed were explained to the

students by Er. Vinod Chahal site Engineer. It was

very beneficial visit for students and enhanced their

knowledge regarding the processes in the subject

Geotechnical Engineering-I . 27 students were

present in this visit. Head of Department

Dr.P.Y.Pawade was provided the necessary

guidance. The site visit is executed by Prof.

S.D.Ghodmare, Prof. V.K.Gajghate Asst Prof. from

Civil Engineering Department.

Site visit at Metro Rail Soil Testing

Project at Hingana by M. Tech.

Environmental Engineering Students on

25-07-2015

M. Tech. Environmental Engineering students

had visited the Nagpur Metro Rail Corporation Soil

Testing Project at Hingana Road, Hingna on 25-07-

2015 under the banner of Association of Consulting

for Civil Engineers (India). Prof. M. P. Bhorkar,

Prof. V. K. Gajghate and Prof. S. D. Ghodmare had

taken initiation to conduct the site visit successfully.

10 students of 3rd

Semester Env. Engg. had visited

and studied the various aspects of Geo

Environmental engineering. The students were very

keen to know the degradation of environment due to

the development of the city. The impact of

construction on the surrounding soil was analyzed

during the visit. The soil testing project was

collecting the samples of the soil to analyze for safe

construction of metro rail project. Various

equipments were available at the site for the sample

collection and analysis. The impacts of construction

on the ground water were also explained by Er.

Vinod Chahal site Engineer. Head of Department

Dr. P. Y. Pawade had provided the necessary

guidance.

Industrial Visit to SM Wireless Solution

on 27/7/2015 Monday


Participants: PG 1st & 3

rd SEM M-TECH CSE


Computer Science Engineering Department of G. H.

Raisoni College of Engineering has organized

Industrial Visit for 1st & 3

rd Semester M-Tech CSE

students on 27th

JULY 2015 at SM Wireless

Solution. Total 45 students with two faculty

members Archana Raut and Shrawan Purve from

CSE department have attended the Industrial Visit.

SM Wireless Solution is hardware and software

designing industry and work on various platforms.

They mainly work on designing IC’s. The main aim of this visit is to provide students a glimpse of the

actual work situation and to understand the industry

environment and to gain some work experience.

Compiled and Edited By Dr. L. G. Malik Prof. P. N. Borkar

Documents

GUEST LECTURE - G. H. Raisoni College of Engineering Nagpurghrce.raisoni.net/TEQIP/VATAYANI JULY 15(1).pdf · Guest Lecture on "Research &carrier opportunity in automotive industry”