Embed Size (px)
DESCRIPTION
Geyser - Class-1, MFV placing at the time of packing. This is the Multi function valve Put Separate in the Thermocol as shown in picture. MFV in Plastic body at the time of Packing. This is The MFV. MFV in Metal body at the time of Packing. - PowerPoint PPT Presentation
Citation preview
ECOLOGY – CREATE A SUSTAINABLE LIFE
Geyser - Class-1, MFV placing at the time of packing
This is the Multi function valvePut Separate in the Thermocol as shown in picture.
At the time of product installation assemble the Multi Function Valve in Inlet Pipe without any Changes in Multi Function Valve.
MFV in Plastic body at the time of Packing
MFV in Metal body at the time of Packing
This isThe MFV
ECOLOGY – CREATE A SUSTAINABLE LIFE
Geyser - Class-1, Draining Procedure
Screw
Procedure to Drain the water from tank to prevent the Scaling in Element & Tank.
Before After
Before Draining the water remove the Screw from MFV by screw Driver thenopen the Lever as shown in Picture 2.
After finish the Draining it is must again tighten the screw in MFV properly as shown in Pic. 1.
Lever
Pic. 1 Pic. 2
