9
PermaTimber® FENCE DESIGN GUIDE Create the perfect fence with the PermaTimber® Fence Design Guide. V.2019.1

FENCE DESIGN GUIDE…-CAD-2.jpg Footing Depth Footing Diameter ost Cas Top Rail Panel Middle Post Cap osts Middle Posts ost Caps Bottom Rail Middle Post Cap rma Composites®, WA, 6065

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

  • PermaTimber®

    FENCEDESIGNGUIDE

    Create the perfect fence with the PermaTimber® Fence Design Guide.

    V.2019.1

  • FENCE DESIGN GUIDE

    PERMA FENCE™ BY PERMATIMBER®

    Made from a hard wearing, durable composite timber, Perma Fence™ by PermaTimber® is the perfect way to add a touch of style to your home or commercial project. A wide range of colours, accessories and configurations have been engineered and are available to suit any type of installation.

    A Configuration to Suit Every OccasionWith Perma Fence™, you have the option of using a visible or hidden post configuration for strength and stability.

    Visible Post Configuration

    Post spacing and footing size will vary depending on the wind speed at the installation location.

    Components Required: 9 Perma Fence™ Panels 9 Bottom / Top Rail 9 Single Post 9 Single Post Caps 9 Intermediate Posts 9 Intermediate Post Caps 9 Corner Posts (Optional) 9 Corner Post Caps (Optional)

    Hidden Post Configuration

    Post spacing and footing size will vary depending on the wind speed at the installation location.

    Components Required: 9 Perma Fence™ Panels 9 Bottom / Top Rail 9 Single Post 9 Single Post Caps 9 Steel Inserts 9 Corner Posts (Optional) 9 Corner Post Caps (Optional)

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    Fence Panel

    Single Post Cap

    Single Post

    Steel InsertsSingle Post Cap

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    Top Rail

    Bottom Rail

    Footi

    ng D

    epth

    Footing Diameter

    End PostCas

    Top Rail

    WPC Fence Panel

    Middle Post Cap

    End Posts

    Middle Posts

    End PostCaps

    Bottom Rail

    Middle Post Cap

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Mansour Ahamed

    Fence Assembly (Middle Posts)

    07 / 12 / 2018

    DRAWING NUMBERDATE

    PD-014-04-00-0001-RB07/12/18

    FOR APPROVALXX/XX/XX -

    PAGE

    1 OF 2

    N:\Artwork\Logos - Do Not Move\Perma Composites\Logo-and-tagline-CAD-2.jpg

    PAGE 2PermaTimber®

  • FENCE DESIGN GUIDE

    DESIGNING YOUR FENCEWhen designing your fence, you must first be aware of the wind classification at the location where the fence will be installed. To determine the wind classification, you must consider the Region, Terrain Category, Shielding Factor and Topography.

    REGIONWind regions are derived from Australian Standard AS/NZS 1170.2.2011 and are determined by your location within Australia. The visible and hidden post configurations have both been classified and certified for Regions A1 to A5 and B, which are shown on the map below.

    Please Note: Fence configurations can be designed to suit other regions upon request.

    PAGE 3PermaTimber®

  • FENCE DESIGN GUIDE

    TERRAIN CATEGORYTerrain category refers to the influence of the terrain and potential structures on the wind speed at a given location. Perma Fence™ by PermaTimber® is able to withstand a fully exposed open terrain (Category 1) and has been designed for use in all terrain categories.

    PAGE 4PermaTimber®

    SHIELDING FACTORThe shielding factor takes into account the influence of any upwind obstructions against incoming wind speed. The Perma Fence™ by PermaTimber® design has neglected this influence and has been designed for locations with a ‘No Shielding’ factor.

    DESIGNING YOUR FENCE

    TOPOGRAPHIC EFFECTThe topographic effect is the effect of wind on a structure due to its location and height on a hill, ridge or escarpment. The Perma Fence™ by PermaTimber® design omits this effect.

    GUST WIND SPEEDThe Perma Fence™ by PermaTimber® has been designed to withstand gust wind speeds of up to 45ms-1. Please note that the fence configuration may vary in order to withstand this level of wind speed.

    WIND DIRECTIONPerma Fence™ by PermaTimber® has been designed to withstand incoming wind from all directions.

  • FENCE DESIGN GUIDE

    PANEL CONFIGURATIONPerma Fence™ by PermaTimber® has been independently certified to suit various wind speeds, and the following information can be used to help you design the perfect fence for your location. Posts are 1800mm height and are configured as per the wind speed requirements in AS/NZS1170.2:2011.

    FENCE CONFIGURATION FOR WIND SPEEDSThe table below outlines the post configuration and spacing for varying wind speeds.

    Please Note: Posts spacings are valid for all winds up to 33ms-1 and 38ms-1

    Wind Classification Configuration Post Spacing (m)

    N1S to D 2.5D to D 3.6

    2 x ST to 2 x ST 1.8

    N2S to D 1.8D to D 3.0

    3 x ST to 3 x ST 1.8

    S = Single One-Way Post D = Double (Intermediate) Two-Way Post ST = Steel Inserts

    PAGE 5PermaTimber®

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Perma Fence Posts

    08 / 02 / 2019

    DRAWING NUMBERDATE

    08/02/19

    FOR APPROVALXX/XX/XX -

    PAGE

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Perma Fence Posts

    08 / 02 / 2019

    DRAWING NUMBERDATE

    08/02/19

    FOR APPROVALXX/XX/XX -

    PAGE

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Perma Fence Posts

    08 / 02 / 2019

    DRAWING NUMBERDATE

    08/02/19

    FOR APPROVALXX/XX/XX -

    PAGE

    PLAN VIEW: VISIBLE POST CONFIGURATION (S to D & D to S)The figure below outlines the configuration and post spacing for single to double posts.

    CERTIFICATION wyche consulting

    FENCING CERTIFICATION

    Page 2of 2

    Configurations: Wind Design - Annual Recurrence Interval /Wind Speed

    Configuration Post Spacing (m)

    50 years / 33 ms-1 S-D 2.5 D-D 3.6

    2 x ST-2 x ST 1.8 500 years/ 38 ms-1 S-D 1.8

    D-D 3 3 x ST- 3 x ST 1.8

    S=Single One-Way Aluminium Post; D= Double Two – Way Aluminium Posts; ST= Steel RHS Posts

    S D D D

    Plan View: Aluminium Post - Installation Configuration S-D, D-D

    S ST ST S

    Plan View: Aluminium Post with Steel Internals - Installation Configuration ST-ST Assumptions:

    - Fence Posts 1.8 m in height, - Designed as free standing wall. - Designed for Terrain Category 3 – areas of suburban housing. - Designed with no shielding.

    Outcome: Wyche Consulting herein advise that the fence posts and castellated fencing in the above configurations have been checked and are sufficient to take the wind loadings calculated for the corresponding design wind speeds in accordance with AS/NZS 1170.2:2011. Caroline Morrell Director / Senior Structural Engineer Wyche Consulting Pty Ltd 4/24 Cardigan Tce, Jolimont 6913 Ph: 9287 2626, 0409 208 442 [email protected] 14/11/18

    PLAN VIEW: HIDDEN POST CONFIGURATION (ST to ST)The figure below outlines the configuration and post spacing for single to double posts.

    CERTIFICATION wyche consulting

    FENCING CERTIFICATION

    Page 2of 2

    Configurations: Wind Design - Annual Recurrence Interval /Wind Speed

    Configuration Post Spacing (m)

    50 years / 33 ms-1 S-D 2.5 D-D 3.6

    2 x ST-2 x ST 1.8 500 years/ 38 ms-1 S-D 1.8

    D-D 3 3 x ST- 3 x ST 1.8

    S=Single One-Way Aluminium Post; D= Double Two – Way Aluminium Posts; ST= Steel RHS Posts

    S D D D

    Plan View: Aluminium Post - Installation Configuration S-D, D-D

    S ST ST S

    Plan View: Aluminium Post with Steel Internals - Installation Configuration ST-ST Assumptions:

    - Fence Posts 1.8 m in height, - Designed as free standing wall. - Designed for Terrain Category 3 – areas of suburban housing. - Designed with no shielding.

    Outcome: Wyche Consulting herein advise that the fence posts and castellated fencing in the above configurations have been checked and are sufficient to take the wind loadings calculated for the corresponding design wind speeds in accordance with AS/NZS 1170.2:2011. Caroline Morrell Director / Senior Structural Engineer Wyche Consulting Pty Ltd 4/24 Cardigan Tce, Jolimont 6913 Ph: 9287 2626, 0409 208 442 [email protected] 14/11/18

  • FENCE DESIGN GUIDE

    FOOTINGSPost footings will vary depending on the wind speed, soil type and height of the fence. Footings can be founded in sand, clay or limestone, and concrete shall have a minimum 28-day characteristic strength of 20MPa (Grade 20).

    The following table can be used to select the correct footing size for your application.

    Please Note: Footings near the gates and/or end posts will need the depth increased by 100mm.

    Wind Classification

    Middle Post Spacing (mm)

    Sand Dia x Depth (mm)

    Clay Dia x Depth (mm)

    Lime Stone Dia x Depth (mm)

    N1

    1800 200 x 800 200 x 500 200 x 3002500 200 x 900 200 x 600 200 x 3003000 200 x 950 200 x 600 200 x 3003600 200 x 1000 200 x 650 200 x 300

    N2

    1800 200 x 900 200 x 600 200 x 3002500 200 x 1000 200 x 700 200 x 3003000 200 x 1100 200 x 700 200 x 3203600 200 x 1100 200 x 800 300 x 350

    PAGE 6PermaTimber®

    DESIGN NOTESDesign wind speeds have been determined in accordance with AS1170.2-2002 and AS4055-1992.

    Footings have been based on the soil properties in the following table.

    Soil Type Cohesion Properties Shear Strength PerimeterSand 5kPa 35 DegreesClay 25kPa 15 Degrees

    Lime Stone 8 MPa 37 Degrees

  • FENCE DESIGN GUIDE

    SOUND PROOFING PROPERTIESPerma Fence™ by PermaTimber® can also be used as an acoustic fencing solution for both residential and commercial projects. Tested in compliance with AS1191, it achieved a Weighted Sound Reduction Index of 22 Rw.

    PAGE 7PermaTimber®

    SOUND REDUCTION PERFORMANCEPerma Fence™ by PermaTimber® will typically reduce sound by 22dB, which will make a substantial difference when looking to block out noisy traffic or neighbors.

    The human perception of sound emittance is shown in the table below.

    Sound Reduction (dB) Loudness Sensation130 Jet Aircraft at 100’

    Physical Pain120 Bass Drum at 3’110 Thunder

    Deafening100 Elevated Train90 Loud Street Noise

    Very Loud80 Police Whistle70 Noisy Office

    Loud60 Average Factory50 Noisy Home

    Moderate40 Conversation30 Quiet Home

    Faint20 Quiet Conversation10 Rustle of Leaves

    Whisper0 Soundproof Room

    Perma Fence™ has the ability to reduce sound by up to 22dB, turning a noisy home into a quiet one.

  • FENCE DESIGN GUIDE

    ALTERNATIVE CONFIGURATIONDue to its modular design, Perma Fence™ by PermaTimber® can be used in a variety of different configurations.

    PAGE 8PermaTimber®

    FRAMED CONFIGURATIONSteel framework can be used for ease of installation and extra support. Please speak to your local PermaTimber® representative for more information.

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Perma Fence SHS Frame Set Up

    08 / 02 / 2019

    DRAWING NUMBERDATE

    08/02/19

    FOR APPROVALXX/XX/XX -

    PAGE

    Perma Composites®14 Garino Rise,Wangara, WA, 6065

    P: 08 6222 6681E: [email protected]: www.permacomposites.com

    Copyright: This drawing is the property of Perma Composites Pty Ltd &Must not be reproduced or copied without prior, written authorization

    from Perma Composites Pty Ltd.

    General Notes

    Project

    Date

    Scale

    Drawn ByDo Not Scale

    Perma Fence SHS Frame Set Up

    08 / 02 / 2019

    DRAWING NUMBERDATE

    08/02/19

    FOR APPROVALXX/XX/XX -

    PAGE

  • FENCE DESIGN GUIDE

    MAINTENANCE REQUIREMENTSPerma Fence™ by PermaTimber® is suitable for use in marine environments, as the composite timber material will not rot or corrode. General cleaning will be required when it becomes dirty, please refer to the PermaTimber® Care Guide for further instructions.

    Perma Composites® does not accept liability for any loss or damage suffered as a result of any errors in the interpretation or application of this design guide. Any person wishing to check any calculations made by them pursuant to this method may wish to seek independent engineering advice.

    PAGE 9PermaTimber®