ONLINE ONLYAUCTION

Visit Our Website For Full Terms & Conditions, Additional Information at www.kosterindustries.com

ONLINE BIDDING ENDS: Tuesday, September 1st, 2015 at 2:00 p.m.ONE DAY ONSITE INSPECTION: Monday, August 31st from 8:00 a.m. to 4:00 p.m.

Online Bidding Through

FEATURING: (20) OBI Punch Presses (up to 75-Ton capacity)

• Rafter 8-Stand Roll Former • Toolroom • Belt Sanders

• Late-Type Spot Welders (up to 100-kva)

• Large Quantity of Shop Support

COMPLETE STAMPING FACILITY

4116 First Avenue, 1st FloorBrooklyn, New York 11232

45-Ton Komatsu Mdl. OBS45-3 Non-Inclinable Gap Punch Press75-Ton V&O Super 75 OBI Air Clutch Flywheel Type Press

Rafter 8-Stand Roll Former, with AC speed motor control

40-KVA Lors Mdl. 140AP-DV Spot Welder

1987

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

www.kosterindustries.com e-mail: info@kosterindustries.com

Corporate Office:40 Daniel Street – Suite 2Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office:978-474-4442 • Fax:978-474-4673

ROLL FORMERRafter 8-Stand Roll Former, with Littell uncoiler, 2" stock feeder, Pneumatic Mdl. 4P-12 4-post down acting cut-off, exit stand, coolant pump, 2" diameter mandrel, Leeson Q Series adjustable AC motor speed control

PUNCH PRESS45-Ton Capacity Komatsu Mdl. OBS45-3 Non-Inclinable Open Back Punch Press, 50–100 SPM, 3.94" slide stroke, 9.84" die height, 2.36" slide adjustment, 31-1/2" x 17.72" x 4.3" bolster, 7-1/2" feeder/straightener, S/N: 12991 (1987)

OBI PRESSES75-Ton Capacity V&O Super OBI Press, air clutch, 1"–3" stroke, 4" slide, 2–300 recommended speed, 44" x 24-1/2" bed area, dual palm controls, S/N: 75ST-107

60-Ton Capacity V&O Super OBI Press, air clutch, 4" stroke, 3-1/2" slide adjustment, 39" x 22" bed area, Coilmatic Mdl. XHF 12" x 30" feed length, .156" capacity, mild steel, straightener/feeder, 30 SPM, S/N: 60ST155

60-Ton Capacity V&O Super OBI Press, air clutch, 2-1/2" stroke, 3-1/2" slide adjustment, 100–200 recommended speed, 39" x 22" bed area, SSC-1000 part revolution control, dual palm controls, S/N: 60ST93

(3) 60-Ton Capacity V&O Super OBI Presses, air clutch, 39" x 22" bed area, 7" stroke, 3-1/2" slide adjustment, dual palm controls, S/N’s: 6057-94; 60ST-86 (foot control); 60ST-74

60-Ton Capacity Bliss Mdl. C-60 OBI Press, air clutch, back geared, 3" slide adjustment, 8" stroke, 11-3/4" shut height, 31" x 22" bed area, 13" stock straightener/feeder, power uncoiler, S/N: H67579; HP51069 (Both 1976)

45-Ton Capacity Bliss Mdl. C-45 OBI Press, air clutch, 3" stroke, 30" x 20" bed area, (2) pneumatic punches, Dallan Industries Mdl. D200-6K24-RH/PTS-207 .125" x 6" and .023" x 1" x 6" feeder/straightener, dual palm controls, S/N: H59876HP45939 (1967)

45-Ton Capacity V&O Super OBI Press, air clutch, 34" x 19-1/2" bed area, dual palm controls, 3" stroke, 3" slide, Coilmatic 8" stock straightener/feeder, S/N: 45ST-100

(2) 35-Ton Capacity Bliss Mdl. C-35 OBI Presses, air clutch, 2-1/2" slide adjustment, 2" stroke, 11-3/4" shut height, 26" x 16" bed area, foot pedal controls, S/N: H61229; HP46916 (Both 1969)

(2) Bliss Israel Mdl. C-35 OBI Presses, air clutch, 3" stroke, 6-1/4" min. shut height, 8-3/4" max. shut height, 26" x 17" bed area, foot pedal control

35-Ton Capacity V&O OBI Press, air clutch, 30" x 19" bed area

22-Ton Capacity Bliss Mdl. C-22 OBI Press, air clutch, 9-1/4" shut height, 2-1/2" stroke, 2-1/4" slide adjustment, 23" x 18" bed area, S/N: H69699/HP53040 (1982)

22-Ton Capacity Bliss Mdl. C-22 OBI Press, air clutch, 3-1/2" stroke, 10-1/2" shut height, 2-1/4" slide, 23-1/2" x 14" bed area, S/N: HP44719H57191 (1967)

(2) Bliss Mdl. 20C Mechanical Clutch OBI Presses, 26-1/2" x 18" bed area, S/N: H45528HP30839 (1956)

Famco Multiformer Mdl. 59-5 OBI Press, 17" x 10" bed area, foot pedal controls, S/N: P-B4R484

Toledo Bench Type OBI Press, S/N: 17154

22-Ton Bliss Mdl. C-22 OBI Flywheel Type Punch Press

60-Ton V&O “Super 60” Flywheel Type Punch Presses

60-Ton V&O “Super 60” Flywheel Type Punch Presses

60-Ton Bliss Mdl. C-60 OBI Back Geared Punch Press

45-Ton Bliss Mdl. C-45 OBI Flywheel Type Punch Press

<35-Ton Bliss Mdl. C-35 OBI Flywheel Type Punch Press

>35-Ton Bliss

Mdl. C-35 OBI Flywheel Type

Punch Press

35-Ton Bliss Mdl. C-35 OBI Flywheel Type Punch Press

60-Ton V&O “Super 60” OBI Flywheel Type Punch Press

PRESS FEED EQUIPMENTLittell Mdl. 20-12 2,000-Lb. Capacity Power Feed Uncoiler, 12" wide, 48" OD, S/N: S-9840-86

Littell Approximately 2,000-Lb. Capacity Power Uncoiler, S/N: 9706-68

Littell Mdl. 40-18 4,000-Lb. Capacity Power Uncoiler, 15"–20", 48" OD, 18" wide, S/N: 92093-75

1976

1 OF 5

1 OF 5

1 OF 4

1 OF 5

1 OF 4

1 OF 4

NEW AS

1982

Sharp Vari-Speed Vertical Knee-Type Mill, with Sony “Millman” digital readout

9" Timesaver “Mini-Belt 948” Belt Sander

23" Burlington Vertical Belt Sander

18" Whitney Jensen Power Brake

Chicago Mdl. 253 Press Brake

3/16" x 36" Pexto Mdl. S336B Power Shear

6" x 18" Reid Mdl. HYB Power Feed Surface Grinder, with Acu-Rite digital readout

6" x 18" Gallmeyer & Livingston Mdl. 25 Power Feed Surface Grinder

19" Powermatic Mdl. 87 Vertical Bandsaw

Insco Mdl. KT-300 Mitre Cold Saw

VERTICAL MILLSSharp Vertical Milling Machine, 9" x 42" power feed table, Align AC-250 servo power feed table control, Sony Millman 2-axis digital readout, 3HP motor, 60–4,500 RPM

Bridgeport Series J Vertical Milling Machine, 9" x 36" power feed table, servo controls, 1HP motor, 80–2,720 RPM spindle speeds, S/N: BR30400

LATHELeBlond “Regal” 15" x 24" Geared Head Engine Lathe, with threading, threading dial, 1-1/2" hole thru spindle, 30–1,200 RPM spindle speeds, 8" 3-jaw chuck, S/N: 2B2184

BELT SANDERS & POLISHERSTimesaver Mdl. “Minibelt 948” 9" Wide Belt Sander, single-head, S/N: 10597

Burlington Sander 23-1/2" Belt Sander, single-head

(2) Pedestal Mounted Double-End Buffing Jacks

BENCH TYPE PUNCH PRESSPerkins Bench Type Punch Press

SHEAR3/16" x 36" Pexto Mdl. S336B 36" Power Shear, manual back gauge, S/N: F7072-44

BENDERSLubow Mdl. L6 Pneumatic Bender, S/N: 10-1965

Pneumatic Horizontal Bender, foot pedal control

BRAKESWhitney Jensen 18" Press Brake, foot pedal control

Chicago Mdl. 253 50" Mechanical Press Brake, 37" between housings, manual back gauge, dual palm controls, S/N: L2824controls, S/N: L2824

DRILLSAB Arboga Maskiner Mdl. E380 20" Geared Head Drill Press, 80–890 RPM spindle speeds, 2.2HP 2-speed, 17" x 20" slotted table, S/N: 166073Clausing Mdl. 2276 20" Floor Type Drill Press, 18" x 16" slotted table, 1-1/2HP motor, S/N: 526298Walker Turner 20" Floor Type Drill Press, 14" x 18" table

SAWS – All TypesPowermatic Mdl. 87 19-1/2" Vertical Bandsaw, 24" x 24" tilting table, butt welder attachment, S/N: 203273

Insco Mdl. KT-300 10" Mitre Cold Saw

Craftsman Mdl. 137.218072 10" Bench Mounted Table Saw, 5,000 RPM, S/N: RQV5053

Walker Turner 12" Diameter Radial Arm Saw

SURFACE GRINDERSReid Mdl. HYB 6" x 18" Power Feed Surface Grinder, Walker Ceramax 6" x 18" permanent magnetic chuck, Acu-Rite 2-axis digital readout, Brown & Sharpe dust collector, S/N: 21578

Gallmeyer & Livingston Mdl. 25 6" x 18" Power Feed Surface Grinder, 6" x 18" electromagnetic chuck, dust collector, coolant pump, S/N: S251299

15" x 24" LeBlond “Regal” Lathe

WELDERSMiller Syncrowave 250 AC/DC Welding Power Source, tig leads, 250-AMP, Miller Coolmate with water chiller, S/N: 903056

Miller Dialarc 250 AC/DC Welding Power Source, 250-AMP, S/N: HK317928

Miller Syncrowave 250 AC/DC Welding Power Source, tig leads, 250-AMP, Miller Radiator 1A water chiller, S/N: KE617514

Miller Mdl. CP-302 300-AMP CV/DC Welding Power Source, Miller S-22A wire feed, S/N: KEG258920Miller “Syncrowave

250” AC/DC Welder

Miller Mdl. CP-302 CV/DC Welder, with S-22A wire feeder

HEAT TREATINGKH Huppert Co. Mdl. ST 6kw Electric Fired Furnace, 10" x 20" x 6-1/2" inside dimensions, digital temperature controls

Thermoline Electric Mdl. F-A1630-1 Electric Furnace, 14" x 6" x 5" inside dimensions, Eurotherm digital temperature controller, S/N: 14911

IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 15% Buyers Premium will apply on all purchases. Company or personal checks will be accepted only if accompanied by a letter from the payor’s bank guaranteeing unqualified payment to Koster Industries, Inc. All checks must be made payable to the order of Koster Industries, Inc. Direct bank wire transfers to the account of Koster Industries, Inc. on balances due will be accepted with prior arrangement. No lot may be removed until complete settlement is made.

IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. All equipment being sold as-is, where-is with no guarantees.

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

www.kosterindustries.com e-mail: info@kosterindustries.com

Corporate Office:40 Daniel Street – Suite 2Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office:978-474-4442 • Fax:978-474-4673

Visit Our Website For Full Terms & Conditions, Additional Information at www.kosterindustries.com

ONLINE BIDDING ENDS: Tuesday, September 1st, 2015 at 2:00 p.m.ONE DAY ONSITE INSPECTION: Monday, August 31st from 8:00 a.m. to 4:00 p.m.

QS-0028000

Online Bidding Through

COMPLETE STAMPING FACILITY4116 First Avenue,

1st Floor, Brooklyn, NY 11232

100-KVA Taylor Winfield Press Type Spot Welder

100-KVA Lors Mdl. 721 4-Head Spot Welder, with microprocessor

40-KVA Lors Mdl. 140AP-DV Spot Welder

American Industrial Mdl. AP40-14 Spot Welder

SPOT WELDERSTaylor Winfield 100-KVA Press Type Spot Welder, 44" throat, water cooled, foot pedal controls, S/N: 87414

Lors Mdl. 721 100-KVA 4-Head Automatic Spot Welder, auto feeder, Interlock Mdl. 108 microprocessor controls

Lors Mdl. 140AP-DV 40-KVA Press Type Spot Welder, 24" throat, Interlock single phase No. 105 microprocessor controls, S/N: 994-5783

Ames Weld Mdl. 340SDA 40-KVA Rocker Arm Type Spot Welder, 24" throat, foot pedal controls, Sterling Utilities weld timer, S/N: 4696

Sterling Mdl. SP18ASB 40-KVA Press Type Spot Welder, 18" throat, weld timer, S/N: 3399

American 30-KVA Butt Welder, S/N: 1966

American Industrial Mdl. AP40-14 40-KVA Press Type Spot Welder, 14" throat, weld timer, foot pedal controls, S/N: S-1180

Taylor Winfield Mdl. FWB-18-50A1 50-KVA 4-Head Press Type Spot Welder, 24" throat, updated weld timer, S/N: 511143

MISCELLANEOUSThompson Mdl. 161 Pedestal Riveter, S/N: 5282

Detecto 2,000-Lb. Capacity Inground Floor Scale

20-Ton Capacity H-Frame Shop Press, 24" between uprights

Rockwell Mdl. 438-02-314-0186 6" Double-End Pedestal Grinder

Bench Mounted Hand Tapper

14-1/2" x 8" Demagnetizer

American Rectifier Demagnetizer

Butterfly Mdl. 16 Special Die Filer, S/N: 1063

Powermatic Mdl. 30 6" x 12" Belt/Disc Sander, S/N: 68-6533-8

Approximately 15HP Single-Stage Tank-Mounted Horizontal Air Compressor

Quincy Mdl. QSB25ANA12SQ 25HP Skid Packaged Screw Type Air Compressor, 21,574 hours, S/N: 00518J

Arrow Pneumatic Mdl. F70/100 70/100 SCFM Refrigerated Compressed Air Dryer, S/N: XI283

Clark Mdl. EC500-45F 4,000-Lb. Capacity Electric Forklift Truck, solid tires, 3-stage mast, 188" reach, 42" forks, S/N: E3555-054504731FA

TCM Mdl. FCR 15HP Electric Forklift Truck (no battery)

Crown Mdl. WA 4,000-Lb. Capacity Walk Along Electric Forklift Truck

Hydraulic Pallet Jacks, Shop Carts, Flat Bed Carts, Banding Carts, Tape Shooters, Box Stapler, Steel Adjustable Pallet Racking, Barrel Trucks, Hand Trucks, Assorted Shipping Scales, Hydraulic Die Lift Carts, Steel Shelving, Assorted Hand Tools, Plug Gauges, Grinding Fixtures, 2-Door Steel Cabinets, Drill Index Boxes, Dumore Grinders, Parts Cabinets, Shop Benches, Bridgeport Mill Vises, Quick Release Drill Vises, Bench Type Arbor Presses, Etc.

FEATURING: (20) OBI Punch Presses (up to 75-Ton capacity) • Rafter 8-Stand Roll Former • Toolroom • Belt Sanders • Late-Type Spot Welders (up to 100-kva) • Large Quantity of Shop Support