LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707

www.lvscontrols.com

Project:

Model No.:

Comments:

APPLICATION

FEATURESMOUNTING

In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC Panel Mount, to convert regular light fixtures into approved emergency lights. The EPC Panel Mount saves energy and money while ensuring compliance with both life safety and energy codes.

During normal operation, the same room switch, occupancy sensor, relay panel, or lighting control switches regular and emergency fixtures on and off simultaneously.

During a utility power interruption, the EPC Panel Mount automatically bypasses the regular lighting controls, turning the emergency lights ON, regard-less of switch position.

The EPC Panel Mount is panel mounted in a junction box or enclosure and is usually located in the electri-cal room.

Unique, Patented Automatic Diagnostic

Fire Alarm, Remote Test & 0-10V Dimming Option

When the room switch is turned off, the EPC Panel Mount will run a 2.5 self-test routine, veri-fying that the emergency power source was available and that the EPC Panel Mount, ballast, and lamp(s) are all functioning correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible loca-tions, because the unit does not rely on access to its manual test switch. LED COMPATIBILE

Utility & Emergency Power Indicator LED’s

Panel mounting with easy to wire terminal blocks

UL®UL924 LISTEDC US

5YEAR

WARRANTY

EPC Panel MountUL924 Emergency Power Control Switched Loads up to 20A

Switch Leg*

Regular Line Hot

Regular Load

Regular Line Neutral

Optional Occupancy Sensor Contact

*

Emergency Hot

Emergency Switch Leg

Emergency Load

Emergency Neutral

**

SPECIFICATIONS

SINGLE LINE DRAWING

WIRING DIAGRAM

ORDERING INFORMATION ADDITIONAL RESOURCES

LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707

www.lvscontrols.com20160422_E001_Spec

EPC Panel MountFor 0-10V dimming, see EPC-1-D For alternate mounting, see EPC-PM & EPC-A-1

Installation InstructionsTheory of Operation & FAQAlternative Wiring Diagrams

Terms & Conditions/Warranty Information

DESIGNATEDEMERGENCY

LIGHTS

REGULAR ROOM LIGHTS

UL 1008Transfer SwitchOr Equivalent

RegularUtility Power

Emergency Power Source

(Neutral Not Shown)

EPCPanel Mount

EPCPanel Mount

TO ADDITIONAL EPC CONTROLS

REGULARPANEL

RegularUtility Power

EMERGENCYPANEL OR INVERTER

$EPC

Panel Mount

EMERGENCY HOT

#3 WHITE

REGULAR PANEL

EMERGENCYPOWER

TEST SWITCH

UTILITYPOWER

20A

#2 RED

#1 BLACK/ORANGE

*

Relay Panel, Power Pack, Sensor, or other (optional)*

Regular Light (optional)

EMERGENCY PANEL OR INVERTER

20AREGULAR HOT

REGULAR NEUTRALEMERGENCY NEUTRAL

#4 WHITE/BLUE

#5 YELLOW

#6 BLUE

Emergency Light

Note: Emergency Light is also called N/E Light or Normal/Emergency Light by many specifiers

MODEL NO.

SENSING INPUT

LOAD RATING

BALLAST LOAD RATING

INCANDESCENT LOAD

WARRANTY

EPC Panel Mount

120V / 277V

120V - 277V (20A)

20A (120-277V)

1800W (120V) / 1500W (277V)

5 Year Replacement Warranty

ELECTRICAL

MOUNTING

RATING

SHIPPING WEIGHT / COLOR

TEMPERATURE

BODY SIZE

Screw mount in metal enclosure

UL94V-0 Flame Rating

7 oz. / Black

32ºF - 140ºF (0ºC - 60ºC)

3-1/2” x 3” x 3”

MECHANICAL