Category: This Monopoint is the smallest in scale and is designed primarily for displays, casework and exhibitions. It can be secured through surfaces up to almost 2” thick. (Note: Photo at left shows a Panel Mount Monopoint with a Claro Spotlight to demonstrate installation example. Claro is not included with the Monopoint; specify desired fixture separately.)

Monopoints: Monopoint Panel Mount to use with a Remote Power Supply (MPPM-RP).

Material: Extruded and machined aluminum.

Finish: Brushed Aluminum (AL), White (WH), Black (BLK). Refer to Trac and Monopoints Bronze specsheet or the Claro/Monopoints Brass specsheet for Oil-Rubbed Bronze or Brushed Brass finish information.

Source: 24VDC Dedicated LED, Halogen or LED 12VAC MR-16. Refer to linked Spotlight Specific- tion sheets below for details. Contact factory to order MR-16 LED lamps. Halogen Lamps by others.

Power Supply: Refer to 24VDC Driver Specsheet, 12VAC Electronic Transformer Specsheet or 12VAC Magnetic Transformer Specsheet for Power Supply options.for Power Supply options. NOTE: For dimming LED MR-16 lamps (Soraa) with electronic/magnetic transformers, please refer our MR-16 LED Specsheet for technical details. In-rush may be a factor with other manufacturers LED MR-16 lamps; refer to their spec sheets.

Spotlights: 12VAC: Claro, Argent, Arlo, Tiro, Arte-MR-16, Arte-AR-111 24VDC: Pico 1, Oculus, Mini-Kore Pendants

Installation: Monopoints are not designed with internal isolation for metal ceiling installation. Contact factory for isolation gaskets. Refer to Installation Instructions for details. For system layout, and specification assistance, refer to the Trac Design Guide under the Gallery link. Non-IC rated.

Accessories: Monopoint Plug (MP), 72” Spot Extension (SpotExt72), 72” Double Spot Extension (DSpotExt72), Universal Sloped Ceiling Adapter (USCA). When Mini-Kore Pendants are installed on a sloped ceiling with a Monopoint, the Universal Sloped Ceiling Adapter (USCA) must be used. Labels: ETL & CE Listed; Tested to UL 1574 - Issue: 2004/09/07 Ed: 3 Rev: 2012/01/25 UL Standard for Safety Track Lighting Systems. IP20. Interior use only. Non-IC rated. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifi- cations or materials. Technical specification sheets that appear on teganlighting.com are the most recent version and supersede all other versions that exist in any other printed or electronic form. 3 Year Warranty.

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG93 9/5/18 1

IP LED HALOGEN12VAC

24VDC MR-16 LED AR 111 LED

Panel Mount Monopoint IP20 Monopoint System

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG93 9/5/18 2

The Panel Mount Monopoint features the Twist & Click System for a wide variety of Spotlights and Mini-Kore Pendants. This Monopoint is the smallest in scale and is designed primarily for displays, casework and exhibitions. It can be fixed through panels up to 1 3/8” (35mm) thick. (Shown with Claro Spot-light, not included with Monopoint; specify desired fixture separately.) Electrical Rating: at 50W (max) at 12VAC. Cut out hole: ø25mm/.98”. Minimum Ceiling Height: 45mm/1.77”. Maximum Material Thickness: 30mm/1.2”. Monopoints are not designed with internal isolation for metal ceiling installation. Contact fac-tory for isolation gaskets. Accessories: Monopoint Plug (MP), Spot Extension (SpotExt-72), Double Spot Extension (DSpotExt-72), Universal Sloped Ceiling Adapter (USCA). Available in Brushed Aluminum (AL), White (WH) or Black (BLK) finish. Contact factory for special order Bronze and Brass finishes. Refer to Installation Instructions for details.

Panel Mount - Remote Power Supply (MPPM - RP)

ø33mm(1 -5/16”)

ø33

36

Ceiling

4.7mm(3/16”)

ø35mm(1 -3/8”)

CAP

Panel Mount Monopoint

ø36mm(1 -3/8”)

Panel Mount Monopoint IP20 Monopoint System

Recessed, Panel Mount Monopoint - Brushed Aluminum/Brushed Brass/Polished Brass/Bronze/Black/White Finish for use with Remote Power (RP)(MPPM--RP-AL/BBR/PBR/BRZ/BLK/WH).

Accessories for MPRFP - Add to the end of the Catalog #’s above as detailed below. Monopoint Plug, Brushed Aluminum, Black, White Finish (MP-AL/BLK/WH)

72” Spot Extension, Brushed Aluminum, Black, White Finish (SpotExt72-AL/BLK/WH) 72” Double Spot Extension, Brushed Aluminum, Black, White Finish (DSpotExt72-AL/BLK/WH)

Universal Sloped Ceiling Adapter for Monopoints, Brushed Aluminum, Black, White Finish (USCA-AL/BLK/WH).Contact factory for alternative finishes.

Complete Panel Mount* Monopoint Description/Catalog #

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG93 9/5/18 3

The Universal Sloped Ceiling Adapter allows for angle adjustment of any Spotlight when connected to a Monopoint installed on a sloped ceiling. Tilts 90º and rotates 350º. Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order.

Universal Sloped Ceiling Adapter (USCA-AL)

ø16mm(5/8”)

57mm(2 -1/4”)

Field cuttable Connector Spot Extension will attach to any system to extend the Spot 72” from the Monopoint. Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order. Can be cut to shorter lengths at the factory.

72” Spot Extension (SpotExt72-AL)

1.8m(72”)

72” Double Spot Extension for mounting and extending two Spotlights from the Monopoint. Available in Brushed Aluminum (AL) finish. Black (BLK) and White (WH) finishes by special order. Can be cut to shorter lengths at the factory.

72” Double Spot Extension (DSpotExt72)

81mm(3 -3/16’)

ø24mm(15/16”)

1.8m(72”)

ø62

5

ø19

6

ø62

5

ø19mm(3/4”)

Monopoint Plug (MP)

6mm(1/4”)

Panel Mount Monopoint - Accessories

The Monopoint Plug can be used with a Monopoint when not in use, to cover the Twist & Click System. Keeps the connection clean during rough construction phase. Aluminum (AL), White (WH) or Black (BLK) finish. Refer to Bronze Spec Sheet or Claro/Monopoints Brass Spec Sheet for Oil Rubbed Bronze (BRZ) or Brass finishes.

Panel Mount Monopoint IP20 Monopoint System

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG93 9/5/18 4

ARGENT

ArgentClaro

CLARO ARTE - MR-16

Arte - MR-16

OCULUS - SGS

Panel Mount Monopoint - SpotlightsPICO - 1

Pico - 1

24VDCLED

24VDCLED

ARTE - AR-11112VAC AR-111

LED

TIRO - SGS TIRO - FGS

Arte - AR-111Tiro - Short Glare Shield Tiro - Frit Glass Shield

ARLO - LGS

Arlo - Long Glare Shield

ARLO - SGS

Arlo - Short Glare Shield

ARLO - AGS

Arlo - Angled Glare Shield

Panel Mount Monopoint IP20 Monopoint System

12VAC MR-16 12VAC MR-16 12VAC MR-16

12VAC MR-16 12VAC MR-16 12VAC MR-16

12VAC MR-16 12VAC MR-16

Oculus - Short Glare Shield

teganlighting.com • info@teganlighting.com • (415) 504-3536 • TG93 9/5/18 5

Panel Mount Monopoint - Pendants

Panel Mount Monopoint IP20 Monopoint System

Note: When Mini-Kore Pendants are installed on a sloped ceiling with a Monopoint, the Universal Sloped Ceiling Adapter (USCA) must be used.

Mini-Kore Pendant/Benton Shade

MINI-KORE PENDANT

Mini-Kore Pendant/Labyrinth ShadeMini-Kore Pendant/Vidro ShadeMini-Kore Pendant/Karton Shade

MINI-KORE PENDANT

Mini-Kore Pendant/Knitted ShadeMini-Kore Pendant/Cylinder Gem/No ShadeMini-Kore Pendant/Candelabra Gem/No Shade

MINI-KORE PENDANT MINI-KORE PENDANT MINI-KORE PENDANT

MINI-KORE PENDANT

24VDCLED

24VDCLED

24VDCLED

24VDCLED

24VDCLED

24VDCLED

24VDCLED

MINI-KORE PENDANT