2
色安定性の向上 〈ビキュイティ〉DBEF-D2-400は、DBEF-D400のDBEFと拡散フィルムを貼合している接着 剤を改良することで紫外線や熱に対する色安定性を向上させました。 熱的安定性の向上 DBEF-D2-400は輝度上昇用の反射型偏光性フィルムとして広く普及しているDBEFの両 面に拡散フィルムを貼合することで物理的な厚みや強度が増し、熱的安定性を向上させまし た。 拡散機能の付加 DBEF-D2-400はDBEFの両面に拡散フィルムを貼合することで、拡散機能を付加しており ます。また、保護フィルムが不要となりますので工程コストを削減できます。 BEFフィルムとの併用 DBEF-D2-400はBEFと組み合わせることで、より一層の輝度上昇効果が発揮できます。 BEFIIとDBEF-D2-400を組み合わせることで、 100%以上の輝度上昇効果が得られます。 液晶テレビに最適 DBEF-D2-400は、ほとんどすべてのバックライトを対象に設計されたフィルムです。大型液晶 ディスプレイや、高い環境信頼性が求められるカーナビゲーションモニターに最適です。 Improved thermal stability DBEF-D2-400 is designed to improve thermal stability by enhancing its physical thickness and stiffness through laminating diffusing film on both sides of DBEF, which is widely used as a reflective polarizer for brightness enhancement. DBEF-D2-400 輝度上昇フィルム Brightness Enhancement Film Diffusing function Vikuiti DBEF-D2-400 is made of DBEF film with diffused layer on both sides. DBEF-D400 has no protective films and it allows to reduce assembly cost. Combination with BEF films DBEF-D2-400 enhances brightness more in combination with BEF series. It increases 100% or more in brightness when DBEF-D2-400 is used with BEF II. Excellent for use in LCD TV DBEF-D2-400 is designed for use with almost every backlight. It is suitable for use in large LCD, as well as monitors for car navigation systems requiring high environmental reliability. DBEF-D2-400なし Without DBEF-D2-400 DBEF-D2-400あり With DBEF-D2-400 Dual Brightness Enhancement Film-Diffuse2-400 Improvement in color stability <Vikuiti>DBEF-D2-400 improves color stability against UV rays and heat through improvements in the adhesive used to laminate the diffusing film on the DBEF of DBEF-D400.

DBEF-D2-400multimedia.3m.com/mws/media/466109O/dbef-d2-400.pdf色安定性の向上 〈ビキュイティ〉DBEF-D2-400は、DBEF-D400のDBEFと拡散フィルムを貼合している接着

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: DBEF-D2-400multimedia.3m.com/mws/media/466109O/dbef-d2-400.pdf色安定性の向上 〈ビキュイティ〉DBEF-D2-400は、DBEF-D400のDBEFと拡散フィルムを貼合している接着

色安定性の向上〈ビキュイティ〉DBEF-D2-400は、DBEF-D400のDBEFと拡散フィルムを貼合している接着剤を改良することで紫外線や熱に対する色安定性を向上させました。

熱的安定性の向上DBEF-D2-400は輝度上昇用の反射型偏光性フィルムとして広く普及しているDBEFの両面に拡散フィルムを貼合することで物理的な厚みや強度が増し、熱的安定性を向上させました。

拡散機能の付加DBEF-D2-400はDBEFの両面に拡散フィルムを貼合することで、拡散機能を付加しております。また、保護フィルムが不要となりますので工程コストを削減できます。

BEFフィルムとの併用DBEF-D2-400はBEFと組み合わせることで、より一層の輝度上昇効果が発揮できます。BEFIIとDBEF-D2-400を組み合わせることで、100%以上の輝度上昇効果が得られます。

液晶テレビに最適DBEF-D2-400は、ほとんどすべてのバックライトを対象に設計されたフィルムです。大型液晶ディスプレイや、高い環境信頼性が求められるカーナビゲーションモニターに最適です。

Improved thermal stabilityDBEF-D2-400 is designed to improve thermal stability by enhancing itsphysical thickness and stiffness through laminating diffusing film on bothsides of DBEF, which is widely used as a reflective polarizer for brightnessenhancement.

DBEF-D2-400輝度上昇フィルムBrightness Enhancement Film

Diffusing functionVikuiti DBEF-D2-400 is made of DBEF film with diffused layer on both sides.DBEF-D400 has no protective films and it allows to reduce assembly cost.

Combination with BEF filmsDBEF-D2-400 enhances brightness more in combination with BEF series. Itincreases 100% or more in brightness when DBEF-D2-400 is used with BEF II.

Excellent for use in LCD TVDBEF-D2-400 is designed for use with almost every backlight. It is suitable foruse in large LCD, as well as monitors for car navigation systems requiring highenvironmental reliability.

DBEF-D2-400なし Without DBEF-D2-400

DBEF-D2-400あり With DBEF-D2-400

Dual Brightness Enhancement Film-Diffuse2-400

Improvement in color stability<Vikuiti>DBEF-D2-400 improves color stability against UV rays and heatthrough improvements in the adhesive used to laminate the diffusing film onthe DBEF of DBEF-D400.

Page 2: DBEF-D2-400multimedia.3m.com/mws/media/466109O/dbef-d2-400.pdf色安定性の向上 〈ビキュイティ〉DBEF-D2-400は、DBEF-D400のDBEFと拡散フィルムを貼合している接着

拡散フィルム Diffused layer

拡散フィルム Diffused layer

DBEF層 約400μmApprox. 400µm

〈3M〉〈Vikuiti〉〈ビキュイティ〉は、3M社の商標です。

このカタログは、古紙含有率100%の再生紙を使用しています。

輝度上昇のメカニズム図はバックライトにおけるP波とS波の動きです。従来のディスプレイでは、下側偏光フィルムがS波を吸収しますが、DBEF-D2-400を使用したディスプレイでは、S波をバックライト側に反射し、再生しています。結果として、LCDを透過するP波が多くなり、積算光量の増加で、56%の輝度上昇が得られます。

Brightness-enhancing mechanismThe diagram below shows the light pass of P-wave and S-wave in backlight. While bottom polarizerabsorbs the S-wave in conventional displays, S-wave is reflected to the backlight side and recycled indisplay systems using DBEF-D2-400. Thus, the amount of P-wave that passes through the LCD isincreased, and it is enhanced brightness by 56% due to increments in the accumulated amount oflight.

S S

導光板 Light guide plate

反射シート Reflective sheet

反射フィルム Reflective film

上側偏光フィルム Top polarizer

下側偏光フィルム Bottom polarizer

LCD

従来のディスプレイ Conventional displays

DBEF-D2-400を使用したディスプレイ Displays with DBEF-D2-400

光量増加分 Increment in amount of light

DBEF-D2-400

P

PP

P

S

P

P

S

OPP-186-A(100603)TY 6102311

省電力、輝度、可視角度の最適化下のグラフはDBEF-D2-400による輝度の上昇と可視角度範囲の関係を示しています。カーブの下側の面積が水平方向の積算光量です。BEFとの組み合わせによる省電力、輝度、可視角度の最適化を検討する場合に参考としてください。

Optimization in energy-savings, brightness and viewing angleThe graph shows the relationship between brightness enhancement ratio and the observation angleof LCD panel using DBEF-D2-400. The area below the curve on the graph indicates the horizontallyaccumulated amount of light. These are the reference for optimizing the energy-savings, brightnessand viewing angle when used together with BEF film.

製品の構造DBEFの両面に拡散フィルムを貼合しています。

Product configurationDiffused layer is coated on both sides of DBEF.

DBEF-D2-400 <輝度分布水平スキャン Luminance Distribution Horizontal Scan>

0

50

100

150

200

250

300

0

50

100

150

200

250

300

角 度 Angle[degree]

輝 度 

Lum

inan

ce[c

d/s

qm

]

BL DBEF-D2-400DBEF-D400

-80 -30 20 70

ヘイズ値 Haze

※1輝度上昇率は、バックライトシステムの構成材料、設計および総合照明効率によります。※2法線方向の輝度 50%が得られる全可視角度。

主な仕様と特性(数値は参考値であり規格値ではありません。)

輝度上昇率(法線方向)※1 Brightness enhancement ratio (on axis)

視野角(半値幅)※2

Viewing angle (half-bandwidth)

水  平 Horizontal

垂  直 Vertical

厚さ(公称値) Thickness (nominal value)

DBEF-D2-4001.5910693

79.1%400μm

DBEF-D2-400+BEF II2.118663ーー

ーー

DBEF-D2-400+BEF II 2枚直交 BEFII cross used

2.315753

Physical properties and optical performance (the data are reference only and not specified.)

1 The brightness enhancement ratio depends on the component materials, design, and total illumination efficiency of the backlight system.2 Total viewing angle that enables 50% brightness on axis.

本  社 158-8583 東京都世田谷区玉川台2-33-1

オプティカルシステム事業部

ホームページアドレス http://www.mmm.co.jp/display/