D’Cunha Industriemaschinen GmbHD’Cunha Industriemaschinen GmbH Neues Roland 1 • D-29223 Celle • Germany Tel. (++49) 0 51 41 - 93 77 - 0 • Fax (++49) 0 51 41 - 38 21 08 E-Mail:

D’Cunha Industriemaschinen GmbH

Neues Roland 1 • D-29223 Celle • Germany Tel. (++49) 0 51 41 - 93 77 - 0 • Fax (++49) 0 51 41 - 38 21 08

E-Mail: [email protected] • Internet: www.dcunha-cnc.com

MACHINERY SALES LIST We are pleased to present our latest sales list. The machines described are, either in our warehouse or ex-Site factory. Either way, you may view them under power in all functions. Important for you is the fact that we always check the machines thoroughly before we purchase them and can therefore give you an accurate description of their condition. Our machine inspections are among the most stringent in the business. We also include machines that our customers have asked us to market on their behalf knowing that we will carry out the marketing thoroughly, discreetly and professionally. Over the years, we have told you about our world-wide network of contacts who can help us to source the machines you require, especially that “NO ONE CAN FIND IT MACHINE” which we may not have at the time you require it. This statement we repeat - TRY US ! Whether you are buying or selling machines, we would appreciate a chance to try and work with you. Keep us in mind. We endeavour! See you soon at:


Neues Roland 1 D- 29223 Celle

Germany

Telephone No.: Country Code +49 (0) 5141 - 93770 Facsimile No.: Country Code +49 (0) 5141 – 937770

www.dcunha-cnc.com

[email protected]

1

http://www.dcunha-cnc.com/

mailto:[email protected]




Within the categories the machines are sorted alphabetically

CNC Sliding Head Automatic Lathes ........................................................................................ 3 Lathes CNC................................................................................................................................ 4 Lathes Conventional................................................................................................................. 13 Vertical Lathes CNC ................................................................................................................ 14 Vertical Boring Mills CNC ...................................................................................................... 16 Vertical Boring Mills ............................................................................................................... 18 Horizontal Machining Centres CNC........................................................................................ 18 Vertical Machining Centres CNC ............................................................................................ 31 Milling Machines CNC ............................................................................................................ 38 Portal & Gantry Milling Machines CNC ................................................................................. 40 Portal Milling Machines........................................................................................................... 42 Boring Mills CNC .................................................................................................................... 42 Boring Mills Conventional....................................................................................................... 47 Deep Hole Borers CNC............................................................................................................ 48 Grinding Machines CNC.......................................................................................................... 48 Roll Grinding Machines ........................................................................................................... 50 Plate Bending Machines CNC.................................................................................................. 50 Robots CNC ............................................................................................................................. 51 Rolling Mills ............................................................................................................................ 52

2




CNC Sliding Head Automatic Lathes

CNC Sliding Head Automatic Lathe

GILDEMEISTER GAC 25L

1993; EPL MPST control; Bar capacity 25 mm; Main spindle indexing 7.5°; Spindle drive 7.5/11.3 KW; 8 station tool turret with 4 driven positions; Pick off spindle in the turret for back working with gang type fixed tooling; Hexagon turning; IEMCA bar magazine; Parts catcher; Swarf conveyor.

Proposal Number: L-3129

CNC Sliding Head Automatic Lathe STAR SA16

2000; Fanuc 18i-TA control; Bar capacity 16 mm; Main spindle indexing 1°; Spindle drive 3.7 KW; 6 turning tools; 3 cross machining tools; Synchronised back working spindle; Bar magazine; Parts ejector; Simultaneous front and rear machining.


3




CNC Sliding Head Automatic Lathe STAR SH12

Fanuc 21 T control; Spindle bar capacity 13 mm; Spindle motor rating 1.5 kW; Spindle speeds 500 – 10000 rpm; Max. Turning length 140 mm; Max. boring capacity 7 mm; Max. tapping M6; 5-station tool turret with 3 station front drill.

Proposal Number: L-3143 + L-3144

Lathes CNC

CNC 2-Axis Lathe

GILDEMEISTER GDM30/2A

1992; EPL control; Spindle bar capacity 30 mm; Roehm 3-jaw chuck, diameter 130 mm; Spindle drive motor 12 KW; Spindle speeds to 7500 rpm; Spindle indexing 5°; 12-station tool turret with 6 driven positions; Pick off spindle in the turret, chuck diameter 95 mm; 3 linear tools for back machining (only turning); IEMCA Bar magazin; Parts catcher; Chip conveyor; Very good condition!

Proposal Number L-3130

4




CNC 4-Axis Slant Bed Lathe for Heavy Duty Cutting HEID S500 BL2

1990; Siemens 850T control; Swing over bed/slides 800/550 mm; Turning diameter max. 690 mm; Centre distance 2000 mm; Chuck diameter 400 mm; 2x 12 station VDI 50 turrets; Powerful 37/53 KW main drive; Spindle speeds to 2800 rpm; Tailstock; Steady rest; Chip conveyor; VERY HIGH STOCK REMOVAL RATE! 2 Machines available.


CNC Automatic Lathe with Live Tooling

INDEX ABC 42 1995; Siemens Sinumerik 840C control; Bar capacity 42 mm; Spindle drive 13/21 KW; Spindle speeds to 6300 rpm; Spindle indexing 2.5°; Turret 1: 8 station tool turret with 8 possible live tool positions; Live tool motor rating 4.3 KW; Live tool speeds to 6000 rpm. Pick-off chuck/Synchronised spindle, to 42 mm; Speeds to 4500 rpm; Turret 2: 6 station tool turret; Back working station with two boring station; Parts catcher; Chip conveyor; LMI bar magazine 4000 mm.


5




CNC Automatic Lathe with Live Tooling INDEX ABC SPEEDLINE 52

2006; Siemens 840D control; Spindle bar capacity 60 mm; Main spindle: Spindle motor rating 20/29 KW AC; Spindle speeds to 6000 rpm; Spindle indexing 2.5°; Synchronised spindle in turret 1: Spindle indexing 7.5°; Spindle motor rating 4.2 KW; Spindle speeds to 4500 rpm; Back working with 6 tool stations; Turret 1: 8 station tool turret with 8 possible live tool positions; Live tool motor rating 3.3 KW; Live tool speeds to 6000 rpm; Turret 2: 8 station tool turret with 2 possible live tool positions; Live tool motor rating 4.2 KW; Live tool speeds to 4500 rpm; Parts catcher; Chip conveyor; Parts conveyor; Index LM 3200 bar magazine. Proposal Number: L-3148 + L-3147

CNC Slant Bed Lathe MAX MÜLLER MD5S

1980; EPM control; Swing diameter over bed/cross slides 595/530 mm; Max. turning diameter 400 mm; Max. turning length 1050 mm; Spindle speeds 22 - 3550 rpm; Forkardt 3 KTNC250 chuck 250 mm diameter; 12 station tool turret; Tailstock; Chip conveyor.


6




CNC Slant Bed Lathe for Medium-Large Work pieces MAZAK SLANT TURN 60

1989; Mazatrol CAM T-2 control; Swing diameter over bed/cross slides 915/685 mm; Max. turning diameter 710 mm; Max. turning length 4000 mm; Spindle drive 45 KW; Spindle speeds 2 – 1000 rpm; 3-jaw chuck 800 mm diameter; 15 station tool turret; Tailstock; Chip conveyor; Coolant unit; Various tool holders.


CNC Twin Spindle Lathe with Live Tooling MIYANO BND-51S

2001; Fanuc 21iTB control; Main Spindle: Bar capacity 51 mm; 11 KW; 150-4000 rpm; C-Axis 0.001°; Back spindle: Bar capacity 42 mm; 5.5 KW; 150-4000 rpm; C-Axis 0.001°; Spindle synchronisation; 12 station turret with live tooling; Parts catcher; Parts conveyor; Chip conveyor.


7




CNC Lathe with Live Tooling MONFORTS MNC 600-2

1986; Siemens 3T CNC control; Swing over bed/cross slides 320/160 mm; Turning length 600 mm; Spindle motor rating 30 KW; Spindle speeds to 4000 rpm; Bar capacity 65 mm; C-Axis 0.001°; 12 station turret with 12 live tool positions; Chip conveyor; Tailstock; Prepared for bar magazine; Collet chuck; Good condition.


CNC Multi Tasking Centre MORI SEIKI MT 1500 SZ

2003; MSG 501 control; Swing over bed 830 mm; Max. turning diameter 400 mm; Max. turning length 920 mm; Twin spindles; 2 x C-axes 0.001°; Spindle drives l/r 15/11 & 11/7.5 KW; Spindle speeds l/r to 6000 rpm; Bar capacity 45 mm; Top slide with single tool carrier, X,Y,Z & B Axes. Y-Axis +/- 70 mm, B Axis +/-120°. Tool drive 5.5 KW. Tool speeds to 12000 rpm; Tool magazine for 40 tools. Lower slide with 12 station turret with 12 live tool stations. Tool drive 5.5 KW. Tool speeds to 6000 rpm. Chip conveyor; Scale feedback X1, Y, B; As new!


8




CNC Multi Tasking Centre MORI SEIKI MT 2000 S

2002; Fanuc 16iTA MAPPS control; Swing over bed 850 mm; Max. turning diameter 550 mm; Max. turning length 1020 mm; Twin spindles; 2 x C axes 0.001°; Spindle drives l/r 22/15 & 15/11 KW; Spindle speeds l/r 4500/6000; 250 & 200 mm Kitagawa chucks; Single tool carrier, X,Y,Z & B Axes. Y-Axis +/- 80 mm, B Axis +/-120°. Tool drive 18.5 KW. Tool speeds to 12000 rpm; Tool magazine for 120 tools. CAPTO C6 tooling; Loads of extras!


CNC Lathe MORI SEIKI SL-3H

1984; Fanuc 3TF conversational control; Swing over bed/cross slides 570/350 mm; Max. turning diameter 240 mm; Max. turning length 550 mm; Spindle bore 77 mm; Chuck diameter 200 mm; Spindle drive 11/15 KW AC; Spindle speeds 30 – 4000 rpm; 12 –station tool turret; Tailstock; Very good condition.


9




CNC Lathe NAKAMURA TOME TMC-15

1990; Fanuc control; Swing diameter over bed/cross slides 300/170 mm; Max. turning diameter 180 mm; Max. turning length 250 mm; Spindle bore 47 mm; Spindle nose A2-5; Spindle chuck diameter 165 mm; Spindle drive motor 7.5 KW AC; Spindle speed range 112 – 4500 rpm; 6000 mm bar feeder.


CNC Chucking Lathe OKUMA LCC 15

1996/97; OSP 700L control; Swing diameter over cross slides 450 mm; Max. turning diameter 210 mm; Max. turning length 280 mm; Kitagawa B-208 chuck, diameter 200 mm; Spindle drive motor 7.5/5.5 KW AC; Spindle speeds 35 - 4200 rpm; V12 NC turret.


10




CNC Lathe with Live Tooling OKUMA LR25-M

1990/2006; OSP 5020 LG control; Swing diameter over bed 520 mm; Max. turning diameter 340 mm; Max. turning length 1700 mm; Spindle drive motor 22/30 KW AC; Spindle speeds up to 3500 rpm; C-Axis 0.001°; 12-station turret with live tooling. Tool drive 3.7 KW; Steady rest; Chip conveyor; Partly overhauled.


CNC Flat Bed Lathe OKUMA LS30-N

1987; OSP 5000L-G control; Swing diameter over bed/cross slides 580/300 mm; Max. turning length 1250 mm; 210 mm Kitagawa chuck; Spindle drive motor 15/11 KW; Spindle speeds 25 - 2500 rpm; 4 station horizontal and 6 station vertical turrets; Tailstock; Steady rest; Tool breakage detection. IGF.


11




CNC Multi Axis Turning Centre OKUMA MAC TURN 30 BIG BORE

2000; OSP 7000L control; Swing diameter over bed/cross slides 550/500 mm; Max. turning diameter 500 mm; Max. turning length 1000 mm; Spindle bore 80 mm; C-Axis 0.001°; Spindle drive 22/15 KW AC; Spindle speeds 38 - 3800 rpm; Turret tool positions: 2 with one driven position; Tool drive 6.8/5.5 KW; Y-Axis +/- 95 mm for off centre milling and drilling; Rotary tilting of the tool in B 360° in 1° steps for inclined drilling and tapping; 40-station tool magazine; Mayfran swarf conveyor; Pneumatic parts catcher for parts 70 mm diameter by 150 mm length; Finished parts conveyor; Direct tapping; Abso-Scale for X-Axis; Manual Touch Setter; Coolant through the tool and high pressure pump; IGF one touch conversational programming; IEMCA VIP 80 Bar magazine and many more options!


CNC Lathe TRAUB TND 300

1990; Traub TX8F control; Swing diameter over bed 400 mm; Max. turning diameter 170 mm; Max. turning length 550 mm; Spindle drive motor 18.5 KW AC; Spindle speeds 56 – 5600 rpm; Spindle bar capacity 65 mm (semi-draw tube); Chuck diameter 175 mm; 12-station turret; Tailstock; Good condition.


12




CNC Multi Axis Turn-/Mill Centre

VOEST ALPINE (WFL) WNC 500S 1989; Siemens 850T control; Swing over bed/turn diameter 540/380 mm; Turning length 1200 mm; Spindle indexing 1°; Y-Axis 160 mm for off centre milling; B-Axis tool tilting 180°; 250 mm chuck; Spindle motor rating 37.5 KW; Spindle speeds up to 4000 rpm; Top slide fitted with Single station tool carrier for turning & milling tools; Tool taper ISO 40; Milling spindle drive 7 KW; Milling speeds to 3000 rpm; 15 station tool magazine; Lower slide with 12 station tool turret VDI40; Programmable tailstock; Chip conveyor.


Lathes Conventional

Universal Flat Bed Lathe RYAZAN 16K40-3

2006; Swing over bed/support 840/490 mm; Turning diameter 800 mm. Turning length 3000 mm; Spindle bore 105 mm; 4-jaw independant chuck diameter 800 mm; 3-jaw self centering chuck diameter 400 mm; Spindle motor rating 15 KW; Spindle speed range 10 – 1250 rpm; Spindle torque 3000 Nm; 4 station tool post; 3 nos. steady rest; Taper turning attachment; DRO Elbo; New machine with guarantee! Proposal Number: L-3120

13




Universal Lathe RYAZAN 1H65 x 5000

1990; Swing over bed/support 1000/650 mm; Turning length 5000 mm; Chuck diameter 1000 mm; Spindle motor rating 22 KW; Spindle torque 9500 Nm. Top condition. Proposal Number: L-3160

Vertical Lathes CNC

CNC Vertical Pick-Up Spindle Lathes EMAG VSC 200

1995/1997; Indramat 200 CNC control; Hanging-Pick-Up-Spindle; Swing diameter 290 mm; 200 mm chuck; Spindle drive 34 KW; Spindle speeds to 6000 rpm; C-Axis 0.001°; 12 station turret with live tools; 2 x 2 machines with 11 station EWAB parts conveyor and KNOLL coolant and filtration system; Chip conveyor; Can be used separately; 4 machines available.

Proposal Number: L-3140 + L-3141 + L-3151 + L-3152

14




CNC Twin Spindle Vertical Lathe HESSAPP DV62-2

1981; Kongsberg CNC control; 2 spindles; 2 tool supports; Swing diameter 850 mm; Turn diameter 800 mm; Turning height 500 mm; Spindle speeds 1120 rpm; Spindle drive 54 KW; 2 x 800 mm faceplates; 2 x 4-station turrets VDI 60; Very powerful/rigid machine!!


CNC Twin Spindle Vertical Lathe PITTLER PV 315/2-2

1990; Siemens Sinumerik 850T CNC control; 2 Spindles; 2 tool supports; Swing diameter 500 mm; Turn diameter 400 mm; Vertical travel 450 mm; 2 x 315 mm chucks; 2 x 42 KW spindle drive motors; Spindle speeds 28 – 2500 rpm; 2 x 4-station turrets; Automatic loading; Turn-around station for complete part machining; Tool monitoring; Chip conveyor.


15




Vertical Boring Mills CNC

CNC Vertical Borer with Tool Changer BERTHIEZ

1986; GE 2000 CNC control; Table size 1250 mm; Swing diameter 1500 mm; Table load 11000 kg; Table drive motor 56 KW; Table speeds 0 - 315 rpm; 12 station tool changer; Elevating crossrail; Chip conveyor; Coolant unit.

Proposal Number: V(K)-3567

CNC Vertical Borer with Milling Spindle, Y-Axis and Pallet Changer DÖRRIES SCHARMANN VC 2000/1600 MC-V

1991; Siemens Sinumerik 850T control; Pallet changer with 3 pallets; Pallet diameter 1600 mm; Pallet load 12000 kg; Turning diameter 2000 mm; Turning height 1800 mm; Ram vertical travels Z 1500 mm; Table linear travel for off centre operations Y 2000 mm; Table drive motor 69 kW; Table speed range 2.5 - 280 rpm.; 60 position tool changer with 45 live tools; C-Axis 0.001°; Milling spindle motor 28.5 kW; Milling spindle speeds to 1500 rpm; Universal angular milling head; 90° angular milling head; Renishaw probe; Coolant through the spindle; Loads of extras! SUPERB CONDITION!


16




CNC Vertical Borer with Milling Spindle and Pallet Changer

PIETRO CARNAGHI ATF 8 TM 1995; NUM 1060-II control; Pallet changer with 2 pallets; Pallet diameter 800 mm; Pallet load 1500 Kg; Turning diameter max. 1.000 mm; Turning height max. 750 mm; Table drive motor 60 KW; Table speed range 15 – 1000 rpm.; Spindle taper BT 50; C-Axis positioning 0.001°; Milling spindle motor 23.5 KW; Milling spindle speeds 13-3000 rpm; 80 position tool magazine; Oil coolant unit; Paper band filter for coolant; Renishaw probe; Coolant through the spindle 6-12 bar; Chip conveyor.


CNC Vertical Borer with Pallet Changer & Milling Spindle

TOSHIBA TMF-10 2000; Fanuc 18i-TA control; Pallet changer with 2 pallets; Pallet diameter 1016 mm; Turning diameter max. 1060 mm; Turning height max. 730 mm; Table drive motor 26/22 KW; Table speed range 2 - 500 rpm; C-Axis 0.001°; Spindle drive motor 11/7.5 KW; Spindle speed range 25 – 2500 rpm; 24-station tool magazine; Chip conveyor; Coolant through tool.


17




Vertical Boring Mills

Twin Column Vertical Borer KOLOMNA KU 152

1977; Faceplate Ø 8750 mm; Max. turning Ø 12500 mm; Max. turning height 5000 mm; Max. workpiece weight 200000 kg; Table drive 160 KW; Table speeds to 11.2 rpm; Twin vertical rams for turning and milling; 1 Horizontal side ram; Ram vertical strokes 3200 mm; Ram swivel 40°; In extremely good condition.


Horizontal Machining Centres CNC

CNC Horizontal/Vertical Spindle 5-face Machining Centre BURKHARDT & WEBER MC 100 HV

1985; Siemens 840C control retrofit; 2 pallets 800 x 800 mm; Pallet load capacity 2400 kg; Table indexing 1°; Travels X 1600, Y 1250, Z 1250 mm; Spindle taper ISO 50; Spindle drive motor 45 KW; Spindle speeds 20 - 3800 rpm; 4 gear steps; Spindle torque 2190 Nm; 100-station tool magazine; Coolant through the spindle; Horizontal- /Vertical head enables full 5-face machining in one set-up; 3-D Renishaw probe; SUPERB CONDITION!

Proposal Number: MH-4323

18




CNC Horizontal/Vertical Spindle 5-face Machining Centre

BURKHARDT & WEBER MC 120 HV 1986; Siemens 850M control; 2 pallets 800 x 1000 mm; Pallet load capacity 2400 kg; Table indexing 1°; Travels X 1600, Y 1250, Z 1250 mm; Spindle taper ISO 50; Spindle drive motor 45 KW; Spindle speeds 20 - 3800 rpm; 4 gear steps; Spindle torque 2190 Nm; 98-station tool magazine; Coolant through the spindle; Horizontal- /Vertical head enables full 5-face machining in one set-up; 3-D Renishaw probe; Hydraulic clamping of parts on the pallet …and much more! SUPERB CONDITION!


5-Axis Machining Centre with Pallet Changer DECKEL DMC 60U

2000; 2 pallets 630 x 500 mm; 4th axis 0.001° NC-table; 5th axis NC Milling Head; Traverses X 600 mm, Y 700 mm, Z 600 mm; Spindle taper ISO 40; Spindle drive motor 28/19 KW AC; Spindle speeds 6300 rpm; 60-station tool magazine; Coolant through the spindle 40 bar.


19




CNC Horizontal Machining Centre with Pallet Pool

HECKERT CWK 1250H 1998; Siemens Sinumerik 840D control; 3 pallets 1000 x 1250 mm; Pallet load 5000 kg; Table indexing 1°; Travels X 1850, Y 1250, Z 1525 mm; Spindle drive motor 37/22 KW; Spindle speed range 20 - 6000 rpm.; 180 position tool magazine; Chip conveyor; Laser tool breakage detection; Tool storage: 3 tower magazines with 165 positions, 15 tools with length up to 600 mm; Coolant unit 30/40/50 bar; Coolant filter; 900 l Coolant tank Prepared for probe; Collision free circle in working area 1.800 mm; Remote diagnosis; Pallets continuous operation; Spindle construction extended by 100 mm; Cube with AMF-clamping system on 3rd pallet. Proposal Number: MH-4401

CNC Horizontal Machining Centre with Pallet Changer

HELLER BEA 1 1990; Uni Pro NC 80-C control; 2 pallets 500 x 500 mm; Table indexing 1°; Travels X 630, Y 500, Z 630 mm; Spindle drive motor 36 KW; Spindle speeds 45 - 4000 rpm; Tool taper SK 50; 40-station tool magazine; Swarf conveyor. 2 machines available.

Proposal Number: MH-4388 + MH-4389

20




CNC Horizontal Machining Centre with Pallet Changer HELLER BEA 07

1985; uni Pro NC 80-C control; 2 pallets 400 x 500 mm; Pallet load capacity 300 kg; Table indexing 1°; Travels X 630, Y 500, Z 560 mm; Spindle drive motor 15 KW; Spindle speeds 45 - 6000 rpm; Tool taper ISO 40; 40-station tool magazine.


CNC Horizontal Machining Centre with Pallet Changer HITACHI SEIKI HG400 III

1998; Fanuc Sigma 16M control; 2 pallets 400 x 400 mm; Pallet load capacity 400 kg; Table indexing 1°; Travels X 560, Y 580, Z 510 mm; Spindle drive 11/22 KW; Spindle speeds 60 - 12000 rpm; Spindle torque 196 Nm; Tool taper ISO 40; 60-station tool magazine.


21




CNC 4-Axis Horizontal Machining Centre with Linear Pallet Pool HITACHI SEIKI HS630

2000; Fanuc Sigma 16M control; 9 station linear pallet system; Pallet size 630 x 630 mm; Pallet load capacity 1200 kg; 4th axis 0.001° NC-table; Travels X 820, Y 800, Z 800 mm; Rapids 45 m/min; Spindle drive motor 30/25 KW AC; Spindle speeds 100 - 10000 rpm; Spindle torque 500 Nm; Tool taper ISO 50; 127-station MATRIX tool magazine; Well equipped; Good condition.


FMS with 2 CNC Horizontal Machining Centres HÜLLER HILLE STAR 500 STARLINE

2005; Siemens Sinumerik 840D control; Pallet diameter 500 mm; 4th axis 0.001° NC-table; Travels X 620 mm, Y 630 mm, Z 900 mm; Spindle drive motor 30/25 KW; Spindle speeds to 10000 rpm; Tool taper HSK-A63; 2 Machines with a portal loading system for parts/fixture loading; Demonstration machines with partial guarantee. Superb condition! Proposal Number: MH-4399

22




CNC LARGE Horizontal Machining Centre for Flexible Machining

INNSE ZENITH 1-10 1995; Siemens 880M control; 3 pallets 1.400 x 1.600 mm; Pallet load 10 000 kg; NC-Table B-Axis 0.001°; Traverses X 4000 mm, Y 2000 mm, Z 2500 mm; HEAD MAGAZINE/AUTO HEAD CHANGER FOR 6 MACHINING HEADS : Facing head D’Andrea UTS-400S, 400 mm diameter, U-Axis 125 mm, 400 rpm; Boring spindle head, 110 mm diameter, 37 KW, 6000 rpm, Z-Axis 500 mm; Boring spindle head, 130 mm diameter, 37 KW, 3200 rpm, Z-Axis 500 mm; Twist angular head, 360 x 1° / +/- 180°, 10 KW, 2000 rpm; 300-station tool magazine; Coolant through the spindle; Chip conveyor.


CNC Horizontal Machining Centre for Tool & Die

MAKINO HDNC –2216-A30 1988; Makino/Fanuc Command III control; Table size 2200 x 1000 mm; Table load capacity 10000 kg; Travels X 2200, Y 1600, Z 1000 mm; Spindle drive motor 22 KW; Spindle speeds 10 - 4000 rpm; Tool taper BT 50; 40-station tool magazine; Moreless scale feedback for high accuracies; Special for tool & die!


23




CNC Horizontal Machining Centre with Pallet Changer MAKINO MC65-A40

1990; Fanuc 15M control; 2 pallets 500 x 500 mm; Pallet load capacity 1000 kg; B-Axis NC-table 0.001°; Travels X 635, Y 560, Z 510 mm; Spindle drive motor 11/15 KW AC; Spindle speeds 10 - 4000 rpm; 40-station tool magazine; Renishaw probe; Knoll coolant unit with paper band filter; Oil skimmer; Swarf conveyor; Superb condition.


CNC 4-Axis Horizontal Machining Centre with Pallet Changer MITSUBISHI M-HB5N

1994; Fanuc 18iMA control; 2 pallets 500 x 500 mm; Traverses X 650 mm, Y 650 mm, Z 650 mm; 4th axis 0.001° NC-table; Spindle speeds 120 - 12000 rpm; Spindle motor rating 22 KW AC; Tool taper BT40; 120-station tool magazine; Swarf conveyor; Linear scales; Coolant through the spindle 10 bar; Rotoclear clear-sight window; Overhead wash; Fanuc data server; High speed contouring control; Data protection key; Thermal compensation.


24




CNC Horizontal Machining Centre with Pallet Changer MITSUI SEIKI HS3A

1989; Fanuc 11MA control; 2 pallets 400 x 400 mm; Traverses X 550 mm, Y 400 mm, Z 500 mm; 4th axis 0.001° NC-table; Spindle speeds 60 - 6000 rpm; Spindle motor rating 7.5/5.5 KW; Tool taper MAS BT40; 60-station tool magazine; Linear scales for high accuracies; Chip Conveyor; Partly overhauled.


2 CNC 5-Axis Horizontal Machining Centres connected with Robot Loader

NIIGATA SPN 40 1998; Fanuc 160i-MA; Table size 500 x 500 mm; Table load 400 kg; NC-Table B-Axis 0.001°; 5th axis rotary table C-Axis +/- 110° swivel; Travels X 600 mm, Y 580 mm, Z 560 mm; Spindle taper BT 40; Spindle drive motor 15/22 KW; Spindle speeds 40 - 12000 rpm; 60-station tool magazine per machine; IRB robot loader to load parts from a conveyor to the table; Loaded with options!


25




CNC Horizontal Machining Centre with Pallet Changer NIIGATA SPN 63

1998; Fanuc 160i; 2 pallets 630 x 630 mm; Pallet load 1200 kg; Table indexing 1°; Travels X 1000 mm, Y 880 mm, Z 800 mm; Spindle taper BT 50; Spindle drive motor 30/22 KW AC; Spindle speeds 20 – 12000 rpm; 178-station tool magazine; Loaded with options!


FMS with 2 CNC Horizontal Machining Centres and Pallet Stocker

NIIGATA SPN 63-FMS-2 1998; Fanuc 160i control; 2 pallets 630 x 630 mm; Pallet load 1200 kg; Table indexing 1°; Travels X 1000 mm, Y 880 mm, Z 800 mm; Spindle taper BT 50; Spindle drive motor 30/22 KW AC; Spindle speeds 20 – 12000 rpm; Each machine with a 178-station tool magazine; FASTEMS Pallet system for 58 machine pallets and 176 Euro pallets with control; Loaded with options!


26




CNC Horizontal Machining Centre

OKUMA MC-50 H 1985; OSP 5000 M-G; Twin pallet 500 x 500 mm; Pallet load 700 kg; Table indexing 1°; Travels X 700 mm, Y 650, Z 550 mm; Spindle taper BT 50; Spindle drive motor 15/11 KW AC; Spindle speed range 30 - 4000 rpm; 70-station automatic tool changer; Complete set of spare boards for control.


CNC Horizontal Machining Centre with Pallet Pool OKUMA MC-500H

1990; OSP 5020M control; 6 pallets 500 x 500 mm; Pallet load 800 kg; Travels X 720 mm, Y 630 mm; Z 630 mm; Table indexing 1°; Spindle taper BT50; Spindle drive motor 15/22 KW AC; Spindle speed range 10 - 5000 rpm; 100-station automatic tool changer; Tool breakage detection; Direct tapping; Tool monitoring; Helical Interpolation.


27




CNC 4-Axis Horizontal Machining Centre with Linear Pallet System

SCHARMANN SOLON 3 1990; Siemens Sinumerik 850M control; 8 station linear pallet pool; Pallet size 1000 x 800 mm; Pallet load 2500 kg; Travels X 1600 mm, Y 1000 mm, Z 1000 mm; 4th axis 0.001° NC-table; Spindle drive motor 30 KW; Spindle speed range 20 - 4500 rpm; Spindle torque 1870 Nm; 130-station automatic tool changer; Many options.


CNC Horizontal Machining Centre with Pallet Pool STEINEL BZ24

Siemens Sinumerik 850M control; 4 pallets 400 x 400 mm; Pallet load 300 kg; Travels X 630 mm, Y 500 mm, Z 500 mm; 4th axis 0.001° NC-table; Spindle drive motor 15 KW DC; Spindle speed range 32 - 7100 rpm; Spindle torque 220 Nm; Tool taper ISO 40; 114-station automatic tool changer; Swarf conveyor.


28




CNC Horizontal Machining Centre with Pallet Pool

STEINEL BZ26-FFZ 1990; Siemens Sinumerik 850M control; 9 pallets 500 x 500 mm; Pallet load 200 kg; Travels X 630 mm, Y 500 mm, Z 500 mm; Table indexing 1°; Spindle drive motor 18 KW DC; Spindle speed range 32 - 6200 rpm; Spindle torque 350 Nm; Tool taper ISO 40; 114-station automatic tool changer; Swarf conveyor; Coolant through the spindle.


CNC 4-Axis Horizontal Machining Centre with Pallet Pool STEINEL BZ26-FFZ

1991; Siemens Sinumerik 850M control; 4 pallets 500 x 500 mm; Pallet load 250 kg; Travels X 630 mm, Y 500 mm; Z 500 mm; 4th axis 0.001° NC-table; Spindle drive motor 18 KW DC; Spindle speed range 32 - 6200 rpm; Spindle torque 350 Nm; Tool taper ISO 40; 114-station automatic tool changer; Swarf conveyor; Coolant through the spindle.


29




CNC Horizontal Machining Centre with Pallet Changer TOYODA FH-80II

2000/2001; Fanuc 16i control; 2 pallets 800 x 800 mm; Table indexing 1°; Travels X 1350 mm, Y 1150 mm, Z 1150 mm; Spindle taper BT 50; Spindle drive motor 30 KW; Spindle speeds 35 - 6000 rpm; 120-station tool changer; Chip conveyor; Direct tapping; Coolant through spindle.


CNC Horizontal Machining Centre with Pallet Changer

TOYODA FHN-80T 1981; Fanuc 6M control; 2 pallets 800 x 800 mm; Travels X 1000 mm, Y 900 mm, Z 800 mm; Spindle taper BT 50; 60-station tool changer.


30




Vertical Machining Centres CNC

CNC Drilling & Tapping Centre BROTHER TC 225

1989; CNC 400 control; Table size 600 x 300 mm; Table load 150 kg; Traverses X 420 mm, Y 300 mm, Z 250 mm; Spindle taper BT 30; Spindle motor 4.1 KW; Spindle speeds 6 – 6000 rpm; 10 station tool magazine; Good Condition.

Proposal Number: MV-4217

CNC Drilling & Tapping Centre with Pallet Changer CHIRON FZ08W

1999; Fanuc 21M CNC control; Twin pallet 2 x 450 x 455 mm; Traverses X 300 mm, Y 250 mm, Z 250 mm; Rapids 40/40/60 m/min; Spindle motor 3.7/7.4 KW; Spindle speeds to 15000 rpm; Tool taper HSK-A32; 12 station tool magazine; Good Condition.


31




CNC Drilling & Tapping Centre with Pallet Changer CHIRON FZ08W

2000; Fanuc 21-iM CNC control; Twin pallet 2 x 450 x 455 mm; Traverses X 300 mm, Y 250 mm, Z 250 mm; Rapids 40/40/60 m/min; Spindle motor 3.7/7.4 KW; Spindle speeds to 15.000 rpm; Tool taper HSK-A32; 12 station tool magazine; Good Condition.


Double Column 5-face Machining Centre with Pallet Changer

KOLB CUBIMAT C 1500 1989; Siemens 850ME control; 2 pallets 1500 x 2000 mm; Pallet load 8000 kg; Traverses X 3000 mm, Y 2500 mm, Z 750 mm, W 1500 mm (cross rail positioning); Spindle taper ISO 50; Spindle drive motor 30 KW; Spindle speeds 4000 rpm; Distance between columns 2000 mm; Spindle ~ Table max. 1500 mm; 72 station tool changer; Head magazine with auto head changer; Angle head with auto indexing 2.5°; 5-face machining; HIGH TECHNOLOGY MACHINING SYSTEM!!


32




CNC Vertical Graphite Machining Centre with Pallet Changer MAKINO SNC86-A5

1986; Fanuc 11M; 2 Pallets 1000 x 600 mm; Travels X 800 mm, Y 600 mm, Z 400 mm; Spindle speeds 20000 rpm; 5 station tool changer; Dust collector; AC motors.


CNC Vertical High Speed High Accuracy Machining Centre MAKINO V-33

2002; Fanuc 16M Professional-3 control; Table size 750 x 400 mm; Travels X 600 mm, Y 450 mm, Z 350 mm; Spindle taper HSK-A63; Spindle speeds 20000 rpm; Scale feed back 0.1 mµ; Chip conveyor; Blum tool measuring system; Auto measuring system. Proposal Number: MV-4302

CNC Vertical High Speed High Accuracy Machining Centre MAKINO V-55

2001; Fanuc Professional-3 control; Table size 1000 x 500 mm; Travels X 900 mm, Y 500 mm, Z 450 mm; Spindle taper BT40; Spindle speeds 20000 rpm; Tool magazine positions 25; Through spindle coolant; High Speed R.B.U.; Linear scale feedback 1 mµ; Super GI control.


33




CNC Double Column 5-Face Machining Centre with Pallet Changer MAZAK VERSATECH V-60

2001; Mazatrol Fusion 640M control; Two pallets 3000 x 1250 mm; Travels X 3200 mm, Y 1900 mm, Z 650 mm; Distance between columns 1500; Spindle taper CAT 50; Spindle drive motor 18.5 AC; Spindle speeds 22 - 4000 rpm; 60 station tool changer; Head magazine with auto head changer; Horizontal head indexing 72 x 5°; Renishaw probe; AS NEW!


CNC 5-Axis / 5-Face Milling Centre MIKRON UCP1000

2001; Heidenhain TNC 426M control; CNC Rotary Tilting table diameter 800 mm; Table load 1000 kg; Table rotation B Axis 360°/0.001°; Table tilting/swivelling A-Axis –25/+45° / 0.001°; Spindle motor rating 24 KW; Spindle speed range to 15000 rpm; Tool taper HSK 63; 60 station automatic tool changer; Auto swivelling horizontal/vertical milling head enabling full 5-face machining; CNC controlled rotary table tilting 2-Axis table enabling full 5 Axis machining capability; Renishaw probe MP10; High pressure coolant through the spindle 30 bar; Oil mist suction unit and many more options! ONLY 2000 spindle run hours (new spindle)! ONLY 8500 programme run hours! Beautiful Machine.

Proposal Number: V(F)-3531

34




CNC Vertical U-Axis Machining Centre

MORI SEIKI MV-65-50B/U 1997; Fanuc 16M control; Table size 1700 x 650 mm; Travels X 1524 mm, Y 650 mm, Z 650 mm; Spindle taper BT50; Spindle speeds to 4000 rpm; 30 station tool changer; U-Axis facing tool; U-axis diameter 60 mm; Kitagawa NC Rotary Table TR-400.


CNC Vertical Machining Centre with Pallet Changer MORI SEIKI MV-65/B50 APC

1992; Fanuc 15MF control; 2 Pallets 1700 x 620 mm; Travels X 1524 mm, Y 660 mm, Z 650 mm; Spindle taper ISO 50; Spindle motor rating 18.5/22 KW; Spindle speeds to 6000 rpm; 40 station tool changer; Heidenhain Linear scale; Chip conveyor; Knoll Coolant through the spindle 50 bar; Tool breakage detection.


35




CNC Vertical Machining Centre with Pallet Changer MORI SEIKI SV 500B/50

1999; MSC-501 control; Twin pallets 1320 x 600 mm; Travels X 1020 x Y 510 x Z 510 mm; Rapids 32 m/min; Spindle taper BT 50; Spindle drive motor rating 22 KW; Spindle speeds to 10000 rpm; Tool magazine positions 40.


CNC Vertical Pendulum/Long Bed Machining Centre NORTE VS600

1994; Siemens Sinumerik 820ME GA3 control; Table size 1620 x 550 mm; Table load 1000 kg; Travels X 1500 mm, Y 500 mm, Z 500 mm; Spindle taper ISO 40; Spindle drive motor rating 18.5/23 KW AC; Spindle speed range 60 - 6000 rpm; Spindle torque 120 Nm; 40 station tool changer; Coolant through the spindle; Paper band filter; Electric hand wheel; Swarf conveyor.


36




CNC Vertical Machining Centre with Pallet Pool

OKK OSAKA KIKO PCV 50 1991; Fanuc OM control; 6 Pallets size 630 x 400 mm; Pallet load 200 kg; Travels X 720 mm, Y 520 mm, Z 520 mm; Spindle speed range 100 - 6000 rpm; Spindle drive motor rating 7.5/9 KW; Tool taper DIN 69871; 30 station tool changer; Electric hand wheel. Proposal Number: MV-4065

CNC Double Column 5-Face Machining Centre with Pallet Changer

TOSHIBA MPC 3000 1994/2000; Tosnuc 600MB control; Pallet changer for two pallets 5000 x 2500 mm; Pallet load 20000 kg; Travels X 6400 mm, Y 3500 mm, Z 800 mm, W 1500 mm; Distance between the columns 3000 mm; Spindle to table max. 2200 mm; Spindle taper JIS BT 50; Spindle drive motor rating 30 KW AC; Spindle speeds 5 - 3000 rpm; Tool magazine positions 120; Chip conveyor; Combined horizontal/vertical head for 5-face machining; Coolant through the spindle 25 bar.


37




CNC Vertical JIG-ACCURACY Machining Centre with Pallet Changer YASDA YBM 8120DV-PC

1992; Fanuc 15M control; Pallet changer, pallet size 800 x 1000 mm; Travels X 800 mm, Y 1200 mm, Z 450 mm; Spindle taper BT40; Spindle speeds to 6000 rpm; Tool magazine positions 60; Chip conveyor; Jig borer accuracies!!


Milling Machines CNC

5-Axis Milling Centre CNC FERRARI, C.B. A16

1993; E160 CNC control; Dividing head as work piece holder, fully controlled in 2 axes; C Axis 360° rotation & A Axis tilting; Work piece holder with ISO 50 taper; Column longitudinal travel X 1050 mm; Spindle vertical travel Y 420 mm; Ram cross travel Z 420 mm; Spindle taper ISO 40; Spindle power 10 KW; Spindle speeds 10 - 4000 rpm; 16 station pick-up tool / + Workpiece magazine; ALMOST UNUSED!!!


38




CNC 5-Axis / 5-Face Milling Centre MIKRON UCP1000

2001; Heidenhain TNC 426M control; CNC Rotary Tilting table diameter 800 mm; Table load 1000 kg; Table rotation B Axis 360°/0.001°; Table tilting/swivelling A-Axis –25/+45° / 0.001°; Spindle motor rating 24 KW; Spindle speed range to 15000 rpm; Tool taper HSK 63; 60 station automatic tool changer; Auto swivelling horizontal/vertical milling head enabling full 5-face machining; CNC controlled rotary table tilting 2-Axis table enabling full 5 Axis machining capability; Renishaw probe MP10; High pressure coolant through the spindle 30 bar; Oil mist suction unit and many more options! ONLY 2000 spindle run hours (new spindle)! ONLY 8500 programme run hours! Beautiful Machine.


39




Portal & Gantry Milling Machines CNC

CNC Gantry Milling Machine FOREST-LINE MAJORMILL 240G

2006; Siemens 840D control; Table size 2115 x 8000 mm; Travels: X 8000 mm, Y 2800 mm, Z 1250 mm; Distance between the columns 2400 mm; Spindle drive motor rating 37 KW; Spindle speed range 10 – 4000 rpm; Spindle taper ISO 50; 30-position tool magazine; Renishaw probe; Universal indexing head.


Double Column 5-face Machining Centre with Pallet Changer KOLB CUBIMAT C 1500

1989; Siemens 850ME control; 2 pallets 1500 x 2000 mm; Pallet load 8000 kg; Traverses X 3000 mm, Y 2500 mm, Z 750 mm, W 1500 mm (cross rail positioning); Spindle taper ISO 50; Spindle drive motor 30 KW; Spindle speeds 4000 rpm; Distance between columns 2000 mm; Spindle ~ Table 1500 mm; 72 station tool changer; Head magazine with auto head changer; Angle head with auto indexing 2.5°; 5-face machining; HIGH TECHNOLOGY MACHINING SYSTEM!!


40




CNC Gantry Milling Machine TOSHIBA MG 40200

1990; Tosnuc 600MB control; Table size 20000 x 3000 mm; Travels: Gantry travel X 20000 mm, Y 4500 mm, Z 800 mm, W 1300 mm (cross rail vertical travel); Distance between the columns 4000 mm; Spindle drive motor rating 22/18.5 KW; Spindle speed range 5 - 2000 rpm; Spindle taper MAS BT50; 5-face machining head with horizontal and vertical spindles, Planing head, Automatic head indexing, 3-station head stocker and automatic head changer; 120-station automatic tool changer.


41




Portal Milling Machines

Portal Milling Machine RUSSIAN 6650

1971; Table travel X 17300 mm. Max work piece width 5000 mm; Max. work piece height 4000 mm; 4 spindles, 2 x vertical and 2 x horizontal; Spindle speed ranges 10 - 500 rpm.


Boring Mills CNC

CNC Table Type Boring & Milling Machine with Tool Changer CERUTI AL-T 125

1989/2007; ECS control/or Siemens/Heidenhain; Boring spindle diameter 125 mm; Table size 1100 x 1300 mm; Table load 4000 kg; Travels X 1600 mm, Y 1500 mm, Z 1500 mm, W 750 mm; Spindle drive 22 KW; Spindle speed range 6 - 2000 rpm; Tool magazine positions 40; D’Andrea facing head; Completely overhauled with guarantee. Control of choice.

Proposal Number: V(B)-3196

42




CNC Hydrostatic Table Type Boring & Milling Machine with Tool Changer INNSE ZENITH 2/25

1991/2006; Siemens 840C control; Boring spindle diameter 150 mm; Table size 2000 x 2500 mm; Table load 25000 kg; Travels X 4000 mm, Y 2500 mm, Z 2500 mm, W 800 mm; Spindle drive 53 KW; Spindle speed range 5 - 2300 rpm; Tool magazine positions 60; Head magazine; Facing head; All axes and table are hydrostatically sustained; COMPLETELY OVERHAULED WITH GUARANTEE! (Optionally with Pallet changer).


CNC Table Type Boring & Milling Machine KEARNS RICHARDS SE 150

Retrofitted 1999 with Heidenhain TNC 410 CNC control; Boring spindle diameter 150 mm; Table size 1800 x 1800 mm; Table load kg; Travels X 2350 mm, Y 2200 mm, Z 1490 mm; Spindle axial stroke powered but not CNC 750 mm ; Facing slide travel 340 mm (+/- 170 mm); Spindle drive 37.5 KW; Spindle speeds to 1050 rpm; Facing head; Excellent working condition.


43




CNC Floor Type Boring & Milling Machine SCHARMANN WF 132

1962; Heidenhain TNC 135 control; Boring spindle diameter 130 mm; Travels X 7500 mm, Y 2000 mm, Z 1000 mm, Facing slide U 200 mm; Spindle drive motor 22 KW; Spindle speed range 3.5 – 700 rpm; Spindle taper ISO 50; Retrofitted with a Heidenhain TNC 135 point-to-point control; Facing head.


CNC Ram Type Boring & Milling Machine SKODA W 200 HB-T/NC

1989; Siemens 880ME control; Boring spindle diameter 200 mm; Table size 4500 x 4000 mm; Table load 100 tonnes; Table infeed travel V 5000 mm; Travels X 18000 mm, Y 6550 mm, Z 1600 mm, W 2000 mm; Spindle drive motor 77 KW; Spindle speeds to 900 rpm in 4 gear steps; Boring spindle torque 8800 Nm; Milling spindle torque 35000 Nm; Spindle taper ISO 60 / ISO 50; Ram size 520 x 520 mm; Angle head; Universal head; Facing head.


44




CNC Table Type Borer with pallet Changer and Tool Changer TOSHIBA SHIBAURA BTD-13F.R22

2000; Tosnuc 888 control; Pallet changer with 2 Pallets 1800 x 2200 mm; Pallet load 6500 mm; Boring spindle diameter 130 mm; Travels X 3000 mm, Y 2000 mm, Z 1600 mm, W 700 mm; Table indexing B 0.001°; Spindle drive motor 30/22 KW AC; Spindle speed range 5 – 2500 rpm.; Number of gear steps 3; Spindle torque 3184 Nm; Spindle taper ISO 50; 60 position tool magazine; Full guarding; Coolant through the spindle; Chip conveyor.


CNC Table Type Boring & Milling Machine WOTAN Rapid 1K

1982; Kongsberg CNC control; Boring spindle diameter 120 mm; Table size 900 x 900 mm, load 3000 kg; Table indexing B-Axis 0.001°; Extra Peiseler NC-Table AWU 650/800 B-2 Axis 0.001°; Travels X 1600 mm, Y 1200 mm, Z 1000 mm, W 600 mm; Spindle drive motor 20/56 KW; Speed range 3 – 2000 rpm; ISO 50; 60-station tool magazine; Excellent mechanical condition; Can be used as is OR lends itself very well for a Heidenhain/Siemens retrofit!


45




CNC Table Type Boring & Milling Machine WOTAN Rapid 2R/12

1981; Wotan Control; Boring spindle diameter 130 mm; Table size 1600 x 2000 mm, load 12000 kg; Table indexing 0.001°; Travels X 2000 mm, Y 1600 mm, Z 800 mm, W 1000 mm; Spindle drive motor 45 KW; Speed range 4 – 1600 rpm; Spindle taper ISO 50.


CNC Table Type Boring & Milling Machine with Pallet Changer

WOTAN Rapid 2R/25 1993; Siemens 880M control; Boring spindle diameter 140 mm; 2 pallets 2000 x 2500 mm, load 25000 kg; Table indexing 0.001°; Travels X 4000 mm, Y 2000 mm, Z 800 mm, W 3000 mm, U 170 mm; Spindle drive motor 56 KW; Speed range 4 – 3000 rpm; Faceplate 680 mm; 60-station tool magazine; Angular milling head 360°; Vertical milling head 4 x 90°; In-process measuring system; X,Y,W linear scales; External & internal coolant supply.


46




CNC Floor Type Boring & Milling Machine WOTAN Rapid 4

1982/2002; Fanuc 18M control; Boring spindle diameter 150 mm; Table size 2000 x 2000 mm; Floor plate size 2745 x 9000 mm; Travels X 6000 mm, Y 3650 mm, Z 710 mm, W 710 mm; Speed range to 1200 rpm; ISO 50; 90° Angle head; 3 angle plates 780 x 3500 mm; Direct tapping; Spindle is hydrostatically sustained; Aerostatic slide ways.


Boring Mills Conventional

Table Type Boring & Milling Machine KEARNS RICHARDS SE 180

Boring spindle diameter 180 mm; Table size 1800 x 1800 mm; Table load kg; Travels: Table cross 2230 mm, Spindle vertical 2300 mm, Table longitudinal 1950 mm, Spindle axial 900 mm ; Spindle drive 37.5 KW; Spindle speeds to 1050 rpm; Facing head; Excellent working condition; Heavy duty machine!


47




Deep Hole Borers CNC

CNC Twin Spindle Deep Hole Boring Machine KOLB HTB II-S

1995/Unused; Siemens 840C control; Two spindles mounted on the vertical column; Boring capacity steel/grey casting 100/120 mm; Tapping steel/cast iron 80/100 mm; Column longitudinal travel 6000 mm; Spindle vertical travel 4000 mm; Spindle horizontal travel (boring depth) 1100 + 600 mm; Machine bed ~ lower (main) spindle min./max. 2100/4100 mm; Main spindle drive motor 70 KW; 2nd spindle drive motor 35 KW; SUITABLE FOR HEAT EXCHANGER PLATES ETC…

Proposal Number: V-1444

Grinding Machines CNC

Internal Grinding Machine OVERBECK 600DC

1983; Nahr Controls CNC 462 control; Swing diameter 300 mm; Work piece diameter up to 300 mm; Grinding diameter max. 250 mm; Centre height 150 mm; Table travel max. 300 mm; Grinding length max. 250 mm; Infeed 100 mm; Spindle drive motor 8 KW; Grinding spindle speeds up to 42000 rpm; VERY GOOD CONDITION!


48




CNC Cylindrical Grinding Machine OKUMA GP-36F

1996; OSP 5020G control; Centre distance 1000 mm; Swing over table 330 mm; Max. grinding diameter 300 mm; Max. workpiece weight 300 kg; Grinding wheel: diameter 610 mm, width 135 mm, taper bore 254 mm; Grinding spindle speeds 1409 – 1868 rpm; Grinding spindle drive motor 15/11 KW; C-axis motor 3.6 KW; Tailstock.


CNC 6-Axis Surface & Slideway Grinding Machine SUMITOMO-SHIBAURA KPL 2450

1994/2000; Tosnuc 600MB control; Table size 5100 x 2400 mm; Travels X 6100, Y 3500, Z 1500 mm; Distance between column 2600 mm; Vertical grinding head: Wheel diameter 710 mm; Wheel width 100 mm; Wheel bore 304.8 mm; Max speed 1200 rpm; Profile/Slideway grinding head: Wheel diameter 510 mm; Wheel width 50 mm; Wheel bore 177.8 mm; Max speed 2000 rpm; Paper band filter unit; Hydraulic counter balance; Diamond dressing unit.


49




Roll Grinding Machines

Heavy Duty Roll Grinding Machine

TOSHIBA KWA 2000 B 1977/2004; Capacity 2000 mm x 10000 mm; Swing diameter over bed 2040 mm; Max. workpiece weight 150 tonnes! Grinding wheel diameter 915 mm, grinding wheel width 100 mm; Camber max. 5 mm.


Plate Bending Machines CNC

3-Rolls Vertical Panel Bending Machine HAEUSLER HVMB 2500

1997; Meier CNC controls; Used for bending of boiler tube panels; Max. bending width 2500 mm; Number of bending tools with forming rolls: 3; Tube diameter minimum 25.4 x 3.2 mm; Tube diameter maximum 82.6 x 9 mm; Max. bending force 600 Tonnes; Ask for more data.


50




Plate Bending Machine KRAMATORSK 8000 x 156

1965; Machine weight 426 Tonnes; Hot bending capacity: Plate width 1000 mm, diameter 5000 mm, 156 mm thickness; Plate width 8000 mm, diameter 5000 mm, 76 mm thickness. Cold bending capacity: Plate width 1000 mm, diameter 5000 mm, 87.5 mm thickness; Plate width 8000 mm, diameter 5000 mm, 42 mm thickness. Minimum bending diameter 1000 mm.


Robots CNC

CNC Robot with 6 Controlled Axes GMF-FANUC S360R

1985; Demo machine delivered to customer in 1991; Fanuc teach in control; Max. work piece weight 60 kg; 6-Axis.


51




Rolling Mills

Reversible 4 Stand In Line Rolling Mill GFMWF4-25 Flatblock

1980’s. Computer controlled. For flat bars and square bars production. High precision and high flexibility for small to medium batches of up to 20t per 8 hour shift. Input material 80 mm square/80 mm round x 1000-5000 mm; Output: square bars 12-60 mm, flat bars 19 x 4 to 80 x 50 mm. Run out max. 18 m; Complete with re-heating furnace, conveyors, cutting line, etc.. Excellent condition with a lot of spares.


52

53




Have we whetted your appetite? Would you like to know more? VIEW OUR THOROUGHLY CHECKED MACHINES UNDER POWER ! ASK OUR STAFF TO PROVE OUR MEASUREMENTS ! ASK OUR STAFF TO EVALUATE YOUR WORK PIECES ! HAVE YOUR MACHINES LASER MEASURED BY US ! YOUR TRIP TO VIEW OUR MACHINES ANYWHERE IN THE WORLD WILL BE PAID BY US IF YOU PURCHASE !!! AND MUCH MORE......................... We want to do business with YOU, so... Call us, fax. us, or visit us in our GARDEN showroom in Germany!

WELCOME TO D’CUNHA INDUSTRIEMASCHINEN GMBH

NEUES ROLAND 1 29223 CELLE, GERMANY

Tel.: (++49) - 5141 – 93770 / Fax.: (++49) - 5141 - 9377-70

E-Mail: [email protected]

Website: http://www.dcunha-cnc.com

OUR AIM IS TO ATTAIN.....

LIKE OUR KINGFISHER

‘NATURAL PRECISION’

mailto:[email protected]

http://www.dcunha-cnc.com/

Documents

D’Cunha Industriemaschinen GmbHD’Cunha Industriemaschinen GmbH Neues Roland 1 • D-29223 Celle • Germany Tel. (++49) 0 51 41 - 93 77 - 0 • Fax (++49) 0 51 41 - 38 21 08 E-Mail: