D’Cunha Industriemaschinen GmbH

1

D’Cunha Industriemaschinen GmbH

Neues Roland 1 • D-29223 Celle • Germany Tel. (++49) 0 51 41 - 93 77 - 0 • Fax (++49) 0 51 41 - 38 21 08

E-Mail: [email protected] • Internet: www.dcunha-cnc.com

MACHINERY SALES LIST

We are pleased to present our latest sales list. The machines described are, either in our warehouse or ex-Site factory. Either way, you may view them under power in all functions. Important for you is the fact that we always check the machines thoroughly before we purchase them and can therefore give you an accurate description of their condition. Our machine inspections are among the most stringent in the business. We also include machines that our customers have asked us to market on their behalf knowing that we will carry out the marketing thoroughly, discreetly and professionally. Over the years, we have told you about our world-wide network of contacts who can help us to source the machines you require, especially that “NO ONE CAN FIND IT MACHINE” which we may not have at the time you require it. This statement we repeat - TRY US ! Whether you are buying or selling machines, we would appreciate a chance to try and work with you. Keep us in mind. We endeavour! See you soon at:


Neues Roland 1 D- 29223 Celle

Germany

Telephone No.: Country Code +49 (0) 5141 - 93770 Facsimile No.: Country Code +49 (0) 5141 – 937770

www.dcunha-cnc.com

[email protected]

2




Conventional Lathes................................................................................................................... 3 CNC Sliding Head Automatic Lathes ........................................................................................ 3 Lathes CNC................................................................................................................................ 3 Vertical Lathes CNC ................................................................................................................ 10 Vertical Boring Mills CNC ...................................................................................................... 11 Vertical Boring Mills ............................................................................................................... 12 Horizontal Machining Centres CNC........................................................................................ 13 Vertical Machining Centres CNC ............................................................................................ 17 Milling Machines CNC ............................................................................................................ 19 Portal & Gantry Milling Machines CNC ................................................................................. 20 Boring Mills CNC .................................................................................................................... 20 Deep Hole Borers CNC............................................................................................................ 21 Grinding Machines CNC.......................................................................................................... 22 Roll Grinding Machines ........................................................................................................... 22 Robots CNC ............................................................................................................................. 23 Rolling Mills & Associated Equipment ................................................................................... 23 Steel Production Equipment..................................................................................................... 23 Thread & Worm Milling Machines.......................................................................................... 24 Accessories............................................................................................................................... 24 Enquiries................................................................................................................................... 25

3




Conventional Lathes

Facing and Centre Lathe TUDA TFL-1600 – 1600 x 1750

1990; Swing over bed 1200 mm; Swing over slides 850 mm; Distance between the centres 1750 mm; Swing in the gap 1600 mm; Faceplate diameter 1000 mm; Main drive 11 KW; Spindle speeds 5 – 350 rpm; SUPERB CONDITION;

Proposal Number: L-3261

CNC Sliding Head Automatic Lathes

CNC Sliding Head Automatic Lathe GILDEMEISTER GAC 25L

1993; EPL MPST CNC control; Bar capacity 25 mm; Main spindle indexing 7.5°; Spindle drive 7.5/11.3 KW; 8 station tool turret with 4 driven tool positions; Pick off spindle in the turret for back working with gang type fixed tooling; Hexagon turning; IEMCA bar magazine; Parts catcher; Swarf conveyor; Very nice machine.


Lathes CNC

CNC Lathe with Live Tooling HITACHI SEIKI HT20SII

1990; Seicos L-III CNC control; Swing diameter over bed 380 mm; Max. turning diameter 210 mm; Max. turning length 600 mm; Chuck diameter 200 mm; Spindle drive motor 11 KW AC; Spindle speeds 30 - 5000 rpm; C-Axis 0.001°; 16-station turret with live tooling. Tool drive motor 4.3 KW; Programmable tailstock; Chip conveyor;


4




CNC 4-Axis Lathe with Live Tooling

HITACHI SEIKI HT25-D M 1987; Fanuc 11TT-F CNC control; Swing diameter over bed 510 mm; Max. turning diameter 250 mm; Max. turning length 600 mm; Chuck diameter 255 mm; Spindle drive motor 22/30 KW AC; Spindle speeds 20 - 3600 rpm; C-Axis 0.001°; Top turret: 10-station with 5 live tool positions. Tool drive motor 3.7 KW; Lower Turret with 8 tool positions; Chip conveyor; Short magazine bar feeder unit;


CNC Multi Slide Bar Automatic Lathe with Back Working and Live Tooling

INDEX GB65 Index C200 Multiprocessor CNC control; Main spindle: Bar capacity 65 mm; Spindle drive 19 kW; Spindle speeds to 5000 rpm; C-Axis 0.001°; 2 part-off slides with X-Axes; 2 Forming and part off slides with X & Z Axes; 8 station turret with live tooling and X & Z Axes. Back spindle: Synchronised pick-off spindle in turret; 90 mm Roehm 3-jaw chuck; Back working with 4 stationary tools; Bar magazine and lots of tooling and accessories. In perfect working condition !


CNC Bar Automatic Lathe with Back Working and Live Tooling

INDEX GS42 1991; Index C200 CNC control; Spindle: Bar capacity 42 mm; 20 kW; 60-6300 rpm; C-Axis 0.001°; 2 off 14 station turrets with live tooling. Back spindle: Synchronised pick-off spindle in turret I; Back working station; Bar feed and lots of tooling and accessories. In perfect working condition !


5




CNC Bar Automatic Lathe with Back Working and Live Tooling

INDEX GSC42 1991; Index C200 CNC control; Spindle: Bar capacity 42 mm; 20 kW; 60-6300 rpm; C-Axis 0.001°; 2 off 12 station turrets with live tooling. Back spindle: Synchronised pick-off spindle in turret I; Back working station; Bar feed and lots of tooling and accessories. In perfect working condition !


CNC Heavy Duty Lathe / Roll Lathe

INNSE TC 75/125 x 3500

1986; Siemens 820T CNC control; Swing over bed 950 mm; Swing over the slides 770 mm; Turning length 3500 mm; Chuck diameter 420 mm; Faceplate diameter 840 mm; Spindle motor rating 145 KW; Spindle speeds 2 – 500 rpm in 2 gear steps; Max torque 42700 Nm ! 2 off 8 station turrets; Max. workpiece weight 20 tonnes; Tailstock; Workpiece rest;


Twin Spindle CNC Multi Axis Turning Centre

MAZAK INTEGREX 200-II SY 2002; Mazatrol PC Fusion 640 T CNC control; Swing over bed/cross slides 540/390 mm; Max. turning diameter 540 mm; Max. turning length 1005 mm; Main Spindle: C-axis 0.001°; Spindle drive 22 KW; Spindle speeds to 5000 rpm; 210 mm chuck; Secondary Spindle: C-axis 0.001°; Spindle drive 7.5 KW; Spindle speeds to 5000 rpm; 210 mm chuck; Single tool carrier with X,Y,Z & B Axes. Y-Axis +/- 80 mm for off centre work, B Axis tool tilting 225°/0.001°; Milling spindle drive 15 KW; Milling spindle speeds to 10000 rpm; Tool magazine for 40 tools; KM63 tooling; Loads of extras! 6000 hours run only !


6




CNC Twin Spindle Lathe with Live Tooling

MIYANO BND-34S 1993; Fanuc 0-T CNC control; Main Spindle: Bar capacity 34 mm; 5.5 KW; 170-5000 rpm; Indexing 5°; Back spindle: Bar capacity 26 mm; 2.2 KW; 170-5000 rpm; 8 station turret with 4 live tool stations; Tool drive 1.1 KW; Parts catcher; Parts conveyor; Chip conveyor; Bar feeder unit;


CNC Twin Spindle Lathe for long shafts MIYANO BND-34S

1993; Fanuc 0-T CNC control; Main Spindle: Bar capacity 34 mm; 5.5 KW; 170-5000 rpm Back spindle: Bar capacity 26 mm; 2.2 KW; 170-5000 rpm; 8 station turret Long shaft working attachment; Parts catcher; Parts conveyor; Chip conveyor; Bar feeder unit;


CNC Twin Spindle Lathe with Live Tooling MIYANO BND-34S

1998; Fanuc 18T CNC control; Main Spindle: Bar capacity 34 mm; 5.5 / 7.5 KW; 150-5000 rpm; Indexing 5°; Back spindle: Bar capacity 34 mm; 2.2 / 3.7 KW; 150-5000 rpm; Indexing 5°; 8 station turret with 4 live tool stations; Tool drive 1.1 KW; Parts catcher; Parts conveyor; Chip conveyor; Bar feeder;


CNC Twin Spindle Lathe with Live Tooling MIYANO BND-51S

2001; Fanuc 21iTB CNC control; Main Spindle: Bar capacity 51 mm; 11 KW; 150-4000 rpm; C-Axis 0.001°; Back spindle: Bar capacity 42 mm; 5.5 KW; 150-4000 rpm; C-Axis 0.001°; Spindle synchronisation; 12 station turret with 6 live tool positions; Parts catcher; Parts conveyor; Chip conveyor;


7




CNC Lathe with Linear (Gang) Tooling

MIYANO GN-4 1987; Fanuc 0-T CNC control; 100 mm precision pneumatic chuck; Spindle drive motor rating 3.7 KW; Spindle speeds to 8000 rpm; Linear (gang) type tool support; Chip conveyor; High pressure coolant system; Hardinge 5C collet adapter;


CNC Lathe with Linear (Gang) Tooling MIYANO GN-4

1987; Fanuc 0-T CNC control; 100 mm precision pneumatic chuck; Spindle drive motor rating 3.7 KW; Spindle speeds to 8000 rpm; Linear (gang) type tool support; Chip conveyor; High pressure coolant system; Hardinge 5C collet adapter;








8




CNC Twin Spindle Twin Turret Lathe with Live Tooling

MIYANO LD-41 1990; Fanuc 0-TT CNC control; Main Spindle: Bar capacity 45 mm; 7.5 KW; 133 - 4000 rpm; Spindle indexing 5°; Back spindle: Clamping capacity 45 mm; 3.7 KW; 100-4000 rpm; Top turret 8 station with 4 live tool positions; Lower turret with 6 tool positions; LNS Hydrobar bar feed; Parts catcher; Chip conveyor;


CNC Lathe with Live Tooling MONFORTS MNC 600-2

1986; Siemens 3T CNC control; Swing over bed/cross slides 320/160 mm; Turning length 600 mm; Spindle motor rating 30 KW; Spindle speeds to 4000 rpm; Bar capacity 65 mm; C-Axis 0.001°; 12 station turret with 12 live tool positions; Chip conveyor; Tailstock; Prepared for bar magazine; Collet chuck; Good condition, good buy !


CNC Lathe with Live Tooling

OKUMA LR25-M 1990/2006; OSP 5020 LG control; Swing diameter over bed 520 mm; Max. turning diameter 340 mm; Max. turning length 1380 mm; Spindle drive motor 22/30 KW AC; Spindle speeds 40 - 3500 rpm; C-Axis 0.001°; 12-station turret with live tooling. Tool drive motor 3.7 KW; Steady rest; Chip conveyor; Partly overhauled. SUPERB !


9




CNC Twin Spindle High Precision Lathes with Live Tooling

SPINNER PD/C-SMC 2 Machines : 1999 & 2002; Fanuc 18 iT control; Swing over the bed 300 mm; Swing over cross slides 150 mm; Main Spindle: Bar capacity 32 mm; 7.5 kW; 8000 rpm; C-Axis 0.001°; Back Spindle: Bar capacity 32 mm; 5.5 kW; 8000 rpm; C-Axis 0.001°; Spindle synchronisation; 16 station turret with 8 live tool positions; Live tool drive motor 1.1 KW, Live tool speeds to 6000 rpm; Tool taper VDI 16; FMB magazine bar feeder 5-42/3200; Parts catcher; Chip conveyor; Large tooling package; Excellent quality, only run in oil on small precision medical parts;

Proposal Numbers: L-3251 & L-3252

CNC High Precision Lathes with Live Tooling

SPINNER PD/B-MC 2 Machines; 2002; Fanuc 18 iT control; Swing over the bed 300 mm; Swing over cross slides 150 mm; Spindle: Bar capacity 32 mm; 7.5 kW; 8000 rpm; C-Axis 0.001°; 12 station turret with live tooling; Live tool drive motor 1.1 KW, Live tool speeds to 6000 rpm; Tool taper VDI 20; FMB magazine bar feeder 5-42/3200; Parts catcher; Chip conveyor; Tooling package; Excellent quality, only run in oil;

Proposal Numbers: L-3253 & L-3254

CNC Lathe

TRAUB TND 300 1990; Traub TX8F control; Swing diameter over bed 400 mm; Max. turning diameter 170 mm; Max. turning length 550 mm; Spindle drive motor 18.5 KW AC; Spindle speeds 56 – 5600 rpm; Spindle bar capacity 65 mm (semi-draw tube); Chuck diameter 175 mm; 12-station turret; Tailstock;


10




CNC Multi Slide Bar Automatic Lathe with Back Working

TRAUB TNM42 1993; Traub TX8-F CNC control; Main spindle: Bar capacity 42 mm; Spindle drive 6.9 / 11 kW; Spindle speeds to 4000 rpm; 4 forming & part-off slides with X-Axes; 8 station turret Back spindle: Synchronised pick-off spindle in turret; Back working with 3 stationary tools; Bar magazine and lots of tooling and accessories.


Large capacity 4-Axis CNC Lathe

WARNER & SWASEY SC32 2 Machines available. Retrofitted with Fanuc 18iTB control; Swing diameter over bed 930 mm; Max. swing over cross slides 825 mm; Bed length 4000 mm; Spindle drive motor 50 KW AC; Spindle speeds to 400 rpm; Spindle bore 300 mm; Chuck diameter 630 mm; Top turret V-6; Lower/rear turret Pentagon flat turret; Chip conveyor;

Proposal Number: L-3274 & L-3275

Vertical Lathes CNC

CNC Twin Spindle Vertical Lathe HESSAPP DV62-2

1981; Kongsberg CNC control; 2 spindles; 2 tool supports; Swing diameter 850 mm; Turn diameter 800 mm; Turning height 500 mm; Spindle speeds 1120 rpm; Spindle drive 54 KW; 2 x 800 mm faceplates; 2 x 4-station turrets VDI 60; Linear scale; Very powerful/rigid machine!!


11




CNC Twin Spindle Vertical Lathe

PITTLER PV 315/2-2 1990; Siemens Sinumerik 850T CNC control; 2 Spindles; 2 tool supports; Swing diameter 500 mm; Turn diameter 400 mm; Vertical travel 450 mm; 2 x 315 mm chucks; 2 x 42 KW spindle drive motors; Spindle speeds 28 – 2500 rpm; 2 x 4-station turrets; Automatic loading; Turn-around station for complete part machining; Tool monitoring; Chip conveyor.


CNC Vertical Lathe with Live Tooling TAKISAWA TVM-35

1993; Fanuc 18T CNC control; Swing diameter 900 mm; Turn diameter max. 460 mm; Turning height max. 660 mm; 450 mm chuck; 15/18.5 KW spindle drive; Spindle speeds 3 – 2500 rpm; C-Axis 0.001°; 12 station turret; Milling spindle drive motor 5.5 KW; Milling spindle speeds to 3000 rpm; Tapping to M24; Chip conveyor.


Vertical Boring Mills CNC

ALWAYS LOOKING FOR MORE - PLEASE OFFER US YOUR MACHINES

CNC Vertical Borer with Pallet Changer & Milling Spindle GIDDINGS & LEWIS 511

2 Machines; G&L controls; Pallet changer with 2 pallets; Pallet diameter 900 mm; Turning diameter max. 1200 mm; Max. height under cross rail 900 mm; Table drive motor 50 kW; Table speed range 4.5 - 480 rpm; C-Axis 0.001°; Milling Spindle drive motor 22 kW; Milling spindle speeds to 4000 rpm; 9 station tool magazine with turning & milling tools; Chip conveyor;

Proposal Number: V(K)-3831 & V(K)-3832

12




CNC Vertical Borer with MULTI PALLETS & Milling Spindle

HOMMA TAC-12M Completely overhauled in 1998 by manufacturer; Fanuc 18-T control; 6 Station Pallet Pool; Pallet diameter 1250 mm; Pallet load capacity 2000 kg; Turning diameter max. 1600 mm; Turning height max. 1000 mm; Table drive motor 37/45 kW; Table speed range 1 - 312 rpm; C-Axis 0.001°; Milling Spindle drive motor 15/18.5 kW; Milling spindle speed range 10 – 1800 rpm; 36-station tool magazine with 24 milling tool positions; Machine is in excellent condition and can be inspected under power;

Proposal Number: V(K)-3623

CNC Vertical Borer with Pallet Changer & Milling Spindle TOSHIBA TXN-13(3)

1993; Fanuc 15-TA control; Pallet changer with 2 pallets; Pallet diameter 1250 mm; Turning diameter max. 1600 mm; Turning height max. 1000 mm; Table drive motor 30/37 kW; Table speed range 3.2 - 315 rpm; C-Axis 0.001°; Milling Spindle drive motor 11/15 kW; Milling spindle speed range 12.5 – 1500 rpm; 48 station tool magazine with 32 possible milling tool positions; Chip conveyor; Machine has less than 2000 cutting hours – Machine status close to new !!


Vertical Boring Mills

ALWAYS LOOKING FOR MORE - PLEASE OFFER US YOUR MACHINES

Single Column Vertical Borer

OM TMS2-20/55 1981; Faceplate Ø 2000 & 4000 mm; Max. turning Ø 5500 mm; Max. turning height 1600 mm; Max. workpiece weight 20000 kg; Table drive 37 KW; Moving column enabling a max. turning diameter of 5500 mm; In very good condition.


13




Horizontal Machining Centres CNC

CNC Horizontal/Vertical Machining Centre for 5-Face Machining DMG DMC-60U

2000; MillPlus control; Automatic horizontal/vertical milling head enables 5-face machining in one setup; 2 pallets 500 x 630 mm; B-Axis NC-table 0.001°; Travels X 600, Y 700, Z 550 mm; Spindle drive motor 28/19 KW AC; Spindle speeds to 8000 rpm (geared head); 60-station tool magazine; Heidenhain infrared probe; Rotating clear window; Production package with 40 bar coolant through the spindle; Oil skimmer; Swarf conveyor; Superb condition.

Proposal Number: MH-4394

CNC Horizontal Machining Centre with Pallet Changer HELLER BEA 07

1985; uni Pro NC 80-C control; 2 pallets 400 x 500 mm; Pallet load capacity 300 kg; Table indexing 1°; Travels X 630, Y 500, Z 560 mm; Spindle drive motor 15 KW; Spindle speeds 45 - 6000 rpm; Tool taper ISO 40; 40-station tool magazine.


FMS with 2 CNC Horizontal Machining Centres

HÜLLER HILLE STAR 500 STARLINE 2005; Siemens Sinumerik 840D control; Pallet diameter 500 mm; 4th axis 0.001° NC-table; Travels X 620 mm, Y 630 mm, Z 900 mm; Spindle drive motor 30/25 KW; Spindle speeds to 10000 rpm; Tool taper HSK-A63; 2 Machines with a portal loading system for parts/fixture loading; Demonstration machines with partial guarantee. Superb condition! Proposal Number: MH-4399

14




FMS with 4 CNC Horizontal Machining Centres

MAKINO A55 1996; Fanuc 15MB control; 4 Machines in the system; 10 pallets with pallet vehicle, pallet size 400 x 400 mm; Table indexing 360 x 1°; Travels X 560 mm, Y 560 mm, Z 560 mm; Spindle drive motor 22 KW; Spindle speeds to 14000 rpm; Tool taper HSK-A63; Each machine with a 40 station tool changer; Coolant through the spindles. Loaded with extras. Very good condition ! Proposal Number: MH-4434

CNC Horizontal Machining Centre with Pallet Changer MAKINO A 55 – A 260

1995; Fanuc 16M control; 2 pallets 400 x 400 mm; Pallet load capacity 400 kg; B-Axis NC-table 0.001°; Travels X 560 Y 560, Z 560 mm; Spindle drive motor 22 KW AC; Spindle speeds 50 – 12000 rpm; 260-station tool magazine; Renishaw probe; Programmable coolant through the spindle 10-70 bar with 50 µm filtration system; High speed cutting and lots of options; Swarf conveyor; Very good condition with a new spindle.


CNC Horizontal Machining Centre with Pallet Changer

MAKINO MC65-A40 1990; Fanuc 15M control; 2 pallets 500 x 500 mm; Pallet load capacity 1000 kg; B-Axis NC-table 0.001°; Travels X 635, Y 560, Z 510 mm; Spindle drive motor 11/15 KW AC; Spindle speeds 10 - 4000 rpm; 40-station tool magazine; Renishaw probe; Knoll coolant unit with paper band filter; Oil skimmer; Swarf conveyor; Superb condition.


CNC Horizontal Machining Centre with Pallet Changer MATSUURA ES450H

1997; Fanuc 18iM control; 2 pallets 300 x 300 mm; Traverses X 450 mm, Y 400 mm, Z 400 mm; 1° table indexing; Spindle speeds 50 - 10000 rpm; Spindle motor rating 7.5/5.5 KW; Tool taper MAS BT 40; 30 station tool magazine; Swarf Conveyor; Coolant through the spindle;


15





MAZAK H400N 1995; Mazatrol M32 control; 2 pallets 400 x 400 mm; Pallet load capacity 400 kg; Table indexing 1°; Travels X 560, Y 510, Z 510 mm; Spindle taper CAT 40; Spindle drive motor 7.5/11 KW AC; Spindle speeds 25 - 10000 rpm; 30-station tool magazine; Swarf conveyor; Nice condition.


CNC Horizontal Machining Centre with Boring Spindle MAZAK H1000Q

1990; Mazatrol M32 control; 2 pallets 1000 x 1000 mm; Pallet load capacity 3000 kg; 4th axis 0.001° NC-table; Travels X 1640, Y 1560, Z 1000 mm, W 405 mm; Spindle taper CAT 50; Spindle drive motor 30/22 KW AC; Spindle speeds 14 - 2500 rpm; 80-station tool magazine; Coolant through the spindle; Boring spindle 130 mm diameter; Swarf conveyor; Nice condition.


CNC Horizontal Machining Centre with Pallet Changer MITSUI SEIKI HS3A

1989; Fanuc 11MA control; 2 pallets 400 x 400 mm; Traverses X 550 mm, Y 400 mm, Z 500 mm; 4th axis 0.001° NC-table; Spindle speeds 60 - 6000 rpm; Spindle motor rating 7.5/5.5 KW; Tool taper MAS BT40; 60-station tool magazine; Linear scales for high accuracies; Swarf Conveyor; Partly overhauled.



MITSUI SEIKI HS6A 1995; Fanuc 15MB control; 2 pallets 1250 x 1250 mm; Traverses X 2000 mm, Y 1500 mm, Z 1000 mm; 4th axis 0.001° NC-table; Spindle speeds 10 - 4500 rpm; Spindle motor rating 15/18.5 KW; Tool taper MAS BT50; 60-station tool magazine; Linear scales for high accuracies; Swarf Conveyor; Low hours. Excellent condition.


16




CNC Horizontal Machining Centre with Pallet Pool

OKK OSAKA KIKO HM 50 1999; Fanuc 16iM control; 8 Pallets 500 x 500 mm; Pallet load 800 kg; Travels X 760 mm, Y 730 mm, Z 800 mm; Spindle taper BT 50; Spindle drive motor rating 25/30 KW AC; Spindle speed range 350 - 13000 rpm; Tool taper BT50; 120 station tool changer; Chip conveyor; Renishaw probe for workpieces; Coolant through the spindle 7 bar; Many options. Proposal Number: MH-4432


TOSHIBA BMC-1000 2000; Tosnuc 888 CNC control; 6-station pallet pool 1.000 x 1.000 mm; Pallet load 2500 kg ; Traverses X 2000 mm, Y 1500 mm, Z 1200 mm; Table indexing 360 x 1°; Spindle taper BT 50; Spindle drive motor rating 22 KW; Spindle speeds 15 - 5000 rpm; 120-station tool magazine; Coolant through the spindle 70 bar with magnetic filtration system; Renishaw probing; Swarf Conveyor; Excellent condition;



TOSHIBA BMC-1000 2001; Tosnuc 888 CNC control; 6-station pallet pool 1.000 x 1.000 mm; Pallet load 2500 kg ; Traverses X 2000 mm, Y 1500 mm, Z 1200 mm; Table indexing 360 x 1°; Spindle taper BT 50; Spindle drive motor rating 22 KW; Spindle speeds 15 - 5000 rpm; 120-station tool magazine; Coolant through the spindle 70 bar with magnetic filtration system; Renishaw probing; Swarf Conveyor; Excellent condition;



TOYODA FH80II 2000; Fanuc 16iMA control; 2 pallets 800 x 800 mm; Pallet load 2500 kg ; Traverses X 1350 mm, Y 1150 mm, Z 1150 mm; Table indexing 360 x 1°; Spindle taper BT 50; Spindle drive motor rating 22/30 KW; Spindle speeds 35 - 6000 rpm; 120-station tool magazine; Coolant through the spindle 70 bar with 20 µm filtration system; Swarf Conveyor; Excellent condition;


17




Vertical Machining Centres CNC

CNC Vertical Pendulum/Long Bed Machining Centre

NORTE VS600 1994; Siemens Sinumerik 820ME GA3 control; Table size 1620 x 550 mm; Table load 1000 kg; Travels X 1500 mm, Y 500 mm, Z 500 mm; Spindle taper ISO 40; Spindle drive motor rating 18.5/23 KW AC; Spindle speed range 60 - 6000 rpm; Spindle torque 120 Nm; 40 station tool changer; Coolant through the spindle; Paper band filter; Electric hand wheel; Swarf conveyor.

Proposal Number: MV-4346

CNC Vertical Machining Centre with Pallet Pool OKK OSAKA KIKO PCV 50

1991; Fanuc OM control; 6 Pallets 630 x 400 mm; Pallet load 200 kg; Travels X 720 mm, Y 520 mm, Z 520 mm; Spindle speed range 100 - 6000 rpm; Spindle drive motor rating 7.5/9 KW; Tool taper DIN 69871; 30 station tool changer; Electric hand wheel. Beautiful machine ready for high productivity ! Proposal Number: MV-4065

CNC Vertical Long Bed Machining Centre with Large NC-Table

STAMA MC550S 1998; Siemens Sinumerik 840C control; Fixed table size 1580 x 1000 mm; Table load 2000 kg; NC-Rotary table Fibro 2000 mm diameter, 1500 kg load capacity; Travels X 3000 mm, Y 1000 mm, Z 700 mm; Spindle taper ISO 50; Spindle drive motor rating 26 KW; Spindle speeds 36 – 4500 rpm; Tool magazine positions 45; Chip conveyor; Paper filter for the coolant;


18




CNC Vertical Pendulum/Long Bed Machining Centre

STAMA MC550/S 1991; Fanuc 15MF conversational/graphics CNC control; Table size 3000 x 630 mm; Travels X 2500 mm, Y 630 mm, Z 700 mm; Spindle taper ISO 50; Spindle drive motor rating 18.5/22 KW AC; Spindle speed range 36 – 4500 rpm; Spindle torque 560 Nm; 34 station tool changer; Coolant through the spindle; Paper band filter; Direct tapping; Prepared for 4th axis NC rotary table; Swarf conveyor.


CNC Vertical Machining Centre with 4th Axis NC-Table

VICTOR Vcenter 145 2006; Fanuc 21iM control; Table size 1650 x 650 mm; Travels X 1450 mm, Y 700 mm, Z 700 mm; Spindle taper BT 50; Spindle speeds to 6000 rpm; Spindle drive motor rating 15/11 KW; 30 station tool changer; 350 mm 4th axis table Tsudakoma;. Excellent condition ! Proposal Number: MV-4489

CNC Vertical Machining Centre with extra Angle Head

ZPS MCFV 1680 1999; Heidenhain TNC 426 CB control; Table size 1800 x 780 mm; Table load 1750 kg; Travels X 1650 mm, Y 810 mm, Z 810 mm; Spindle taper ISO 50; Spindle speed range 30 - 6000 rpm; Spindle drive motor rating 22/18.5 KW; 16 station tool changer; Adaptable TDM-HF Spindle 12 KW, 16000 rpm; Angle head manually set; 2 extra NC-Axes in control; Coolant through the spindle; Chip conveyor;


19




Milling Machines CNC

CNC Lateral Milling Machine BUTLER LE 12000

1986; Heidenhain TNC 155P CNC control; Column longitudinal travel X 12000 mm, Spindle vertical travel Y 2800 mm, Ram cross travel 1050 mm; Automatic indexing head; Spindle taper ISO 50; Spindle power 20 KW; Spindle speeds 20 - 1600 rpm; Excellent for machining of large pieces;

Proposal Number: V(F)-3823

5-Axis Milling Centre CNC FERRARI, C.B. A16

1993; E160 CNC control; Dividing head as work piece holder, fully controlled in 2 axes; C Axis 360° rotation & A Axis tilting; Work piece holder with ISO 50 taper; Column longitudinal travel X 1050 mm; Spindle vertical travel Y 420 mm; Ram cross travel Z 420 mm; Spindle taper ISO 40; Spindle power 10 KW; Spindle speeds 10 - 4000 rpm; 15 station pick-up tool / + workpiece magazine; ALMOST UNUSED!!!


5-Axis Milling Centre CNC

HURON EX-C 1996; Siemens Sinumerik 840D CNC control; NC rotary table 800 x 700 mm; Table load 1200 kg; B-Axis 0,001°, 4th axis ; NC Tilting milling head A-Axis 0,001°, -/-100°; 5th axis; Column longitudinal travel X 1600 mm; Ram cross travel Y 700 mm; Spindle vertical travel Z 800 mm; Spindle taper ISO 40; Spindle power 25 KW; Spindle speeds 100 - 14000 rpm; 32 station tool magazine;


20




Portal & Gantry Milling Machines CNC

CNC 5-Axis Gantry Milling Machine

CERUTI 25-5 2004; Siemens 840D control; Table size 2500 x 10000 mm; Travels X 10000 mm, Y 2500 mm, Z 1000 mm; Distance between the columns 3200 mm; Spindle to table min/max 270 / 1270 mm; 2-Axis NC contouring milling head; C-Axis +/- 200°; A-Axis +/- 95°; Spindle taper HSK 63; Spindle drive motor rating 30 KW; Spindle speeds to 12000 rpm; Max torque 280 Nm; 74-position tool magazine; Parts probe; Tool probe; Chip conveyor; Coolant through the spindle.


Boring Mills CNC

CNC Table Type Boring & Milling Machine with Tool Changer CERUTI AL-T 125

1989/2007; ECS control; Boring spindle diameter 125 mm; Table size 1100 x 1300 mm; Table load 4000 kg; Travels X 1600 mm, Y 1500 mm, Z 1500 mm, W 750 mm; Spindle drive 22 KW; Spindle speed range 6 - 2000 rpm; Tool magazine positions 40; Completely overhauled.

Proposal Number: V(B)-3196

CNC Table Type Borer with pallet Changer and Tool Changer

TOSHIBA SHIBAURA BTD-13F.R22 2000; Tosnuc 888 control; Pallet changer with 2 pallets 1800 x 2200 mm; Pallet load 6500 kg; Table load 10000 kg; Boring spindle diameter 130 mm; Travels X 3000 mm, Y 2000 mm, Z 1600 mm, W 700 mm; Table indexing B 0.001°; Spindle drive motor 18,5/22 KW AC; Spindle speed range 5 – 2500 rpm; Number of gear steps 3; Spindle torque 3184 Nm; Spindle taper ISO 50; 60-position tool magazine; Full guarding; Chip conveyor.


21




CNC Table Type Borer with Tool Changer

TOSHIBA SHIBAURA BTD-13F.R22 1997; Tosnuc 888 control; Table size 1800 x 2200 mm; Table load 10000 kg; Boring spindle diameter 130 mm; Travels X 3000 mm, Y 2300 mm, Z 1600 mm, W 700 mm; Table indexing B 0.001°; Spindle drive motor 18.5/22 kW AC; Spindle speed range 5 – 2500 rpm; Number of gear steps 3; Spindle torque 3184 Nm; Spindle taper BT50; 90 position tool magazine; Coolant through the spindle; Chip conveyor.


Deep Hole Borers CNC

CNC Deep Hole Boring Machine DAEYANG DBMC-1000 CNC

2007; Fanuc 0iMC control; Spindle mounted on the vertical column; BTA drilling capacity 16-80 mm; Drilling depth to 1000 mm; Column longitudinal stroke 5000 mm; Headstock vertical stroke 2700 mm; Drilling spindle stroke 1000 mm; Load on the table 50 tonnes; BTA coolant pump 50 bar; Drilling spindle drive 37 KW; Chip conveyor; Lots of tooling and accessories. Excellent condition. SUITABLE FOR HEAT EXCHANGER PLATES ETC…

Proposal Number: V-3682

CNC Twin Spindle Deep Hole Boring Machine

DAEYANG DBMC-1000 CNC 2007; Fanuc 0iMC control; Twin spindle headstock Spindle mounted on the vertical column; BTA drilling capacity 16-80 mm; Drilling depth to 1000 mm; Column longitudinal stroke 4000 mm; Headstock vertical stroke 2200 mm; Drilling spindle stroke 1000 mm; Load on the table 50 tonnes; BTA coolant pump 50 bar; Drilling spindle drive 37 KW; Chip conveyor; Lots of tooling and accessories. Excellent condition. SUITABLE FOR HEAT EXCHANGER PLATES ETC…


22




Grinding Machines CNC

CNC Cylindrical Grinding Machine OKUMA GP-36F

1996; OSP 5020G control; Centre distance 1000 mm; Swing over table 330 mm; Max. grinding diameter 300 mm; Max. workpiece weight 300 kg; Grinding wheel: diameter 610 mm, width 135 mm, taper bore 254 mm; Grinding spindle speeds 1409 – 1868 rpm; Grinding spindle drive motor 15/11 KW; C-axis motor 3.6 KW; Tailstock.


Internal Grinding Machine

OVERBECK 600DC 1983; Nahr Controls CNC 462 control; Swing diameter 300 mm; Work piece diameter up to 300 mm; Grinding diameter max. 250 mm; Centre height 150 mm; Table travel max. 300 mm; Grinding length max. 250 mm; Infeed 100 mm; Spindle drive motor 8 KW; Grinding spindle speeds up to 42000 rpm; VERY GOOD CONDITION!


Roll Grinding Machines

Heavy Duty Roll Grinding Machine NAXOS UNION

1961; Fully overhauled and updated by Naxos in 1992; Capacity 1800 mm x 8000 mm; Max. work piece weight 50 tonnes; Grinding wheel drive 22 KW (new frequency controlled motor 1999); 4 adjustable part supports with bearings for axles 100-500 mm diameters; Boring bar for cylindrical turning tooling and cutters Cermet/PCBN; Superfinishing unit installed in 1997; 3M grinding belts e.g. diamond lapping, microfinishing etc..; Column jib crane 250 kgs.; Grinding wheels. Air compressor. Measuring tools; Loaded with accessories. A full setup for roll processing; ;


23




Robots CNC

CNC Robot with 6 Controlled Axes GMF-FANUC S360R

1985; Demo machine delivered to customer in 1991; Fanuc teach in control; Max. work piece weight 60 kg; 6-Axis.


Rolling Mills & Associated Equipment

Reversible 4 Stand In Line Rolling Mill GFMWF4-25 Flatblock

1980’s. Computer controlled. For flat bars and square bars production. High precision and high flexibility for small to medium batches of up to 20t per 8 hour shift. Input material 80 mm square/80 mm round x 1000-5000 mm; Output: square bars 12-60 mm, flat bars 19 x 4 to 80 x 50 mm. Run out max. 18 m; Complete with re-heating furnace, conveyors, cutting line, etc… Excellent condition with a lot of spares.


Steel Production Equipment

Reversible Reduction Mill SACK

1961/1984; Slab reduction from 220 to 25 mm.


24




Thread & Worm Milling Machines

CNC Thread & Worm Milling Machine WANDERER GF 326 CNC

1980/1993; Fanuc 15M CNC Control retrofitted 1993; Swing over bed 600 mm; Max working diameter 320 mm; Max working length 6000 mm; 3-jaw chuck diameter 350 mm; Milling spindle drive 11 KW; Milling spindle speeds 18 – 2240 rpm; Milling spindle taper ISO 50; Milling spindle tilting range over/under centre line 88/40 mm and horizontally +/- 35°; Tailstock; Chip conveyor; Steady rest; New servo motors and ball screws;


Accessories FMB Turbo 5-42 magazine barfeed LNS Quickload magazine barfeed Vacuum clamping unit Huge amounts of tool holders BT & ISO Various 2/3 & 4 jaw chucks and faceplates Precision clamping plates various sizes Fanuc and Fujitsu servo and spindle boards Electrical switches and other electrical spares Pneumatic and hydraulic hose (new) Etc…etc…etc…

25




Enquiries We are always looking for the following used CNC machines: - CNC Bed Type Milling Machines - CNC Portal Milling Machines - CNC Gantry Milling Machines - CNC Table Type Boring & Milling Machines - CNC Floor Type Boring & Milling Machines - CNC Lathes and Turning Centres - CNC Vertical Borers - CNC Vertical machining centres, post 1997 - CNC Horizontal machining centres, post 1997 - All large CNC machine tools Thank you in advance for your offers. If you have any questions please do not hesitate to contact us.

26




Have we whetted your appetite? Would you like to know more? VIEW OUR THOROUGHLY CHECKED MACHINES UNDER POWER ! ASK OUR STAFF TO PROVE OUR MEASUREMENTS ! ASK OUR STAFF TO EVALUATE YOUR WORK PIECES ! HAVE YOUR MACHINES LASER MEASURED BY US ! YOUR TRIP TO VIEW OUR MACHINES ANYWHERE IN THE WORLD WILL BE PAID BY US IF YOU PURCHASE !!! AND MUCH MORE......................... We want to do business with YOU, so... Call us, fax. us, or visit us in our GARDEN showroom in Germany!

WELCOME TO D’CUNHA INDUSTRIEMASCHINEN GMBH

NEUES ROLAND 1 29223 CELLE, GERMANY

Tel.: (++49) - 5141 – 93770 / Fax.: (++49) - 5141 - 9377-70

E-Mail: [email protected]

Website: http://www.dcunha-cnc.com

OUR AIM IS TO ATTAIN.....

LIKE OUR KINGFISHER

‘NATURAL PRECISION’

Documents

D’Cunha Industriemaschinen GmbH