2
NEW revolutionary frame design maximizes glazing thermal performance and minimizes curb heat loss to provide unmatched NFRC Rated thermal properties without the need for expensive nanogel fill substrate. Featuring clear LEXAN 25mm multiwall sheet on interior is ideal for maintaining conditioned spaces, while the Optix white outer dome maximizes light capture and diffusion while reducing solar heat gain. Ideal for all climate zones. The Series 5000 is also constructed without any of the ‘red listed’ materi- als often restricted by some green standards. Specifically, it is PVC-free. Aluminum Frame and Cap complies with the following: • Aluminum extruded components shall be alloy 6063-T5 or 6063-T6, of sufficient thickness for this application, and as required per structural calculations; ASTM B 221. • Mill finish per AMS-OQ-A-200/9 and MIL-DTL-25995. • Welded corner construction; interior frame and external cap. Outer Dome complies with the following: • ICC-ES listings as CC2 approved plastic complying with Section 2606.4 of the IBC • ANSI Z97.1 Safety Glazing Requirements • Underwriters Laboratories (UL) listings as UL 94HB & UL746 Compliant • Miami-Dade County Product Notice of Acceptance-Plastics • ASTM D-4802 B-1 Plastics Inner Polycarbonate MWS complies with the following: • Fire rating: Class A per ASTM E-84. Class CCI per ASTM D-635. • Maximum Flame Spread/Smoke Development: 5/35 • Sound Transmission: STC 21 • Impact resistance, when tested in accordance with ASTM D 5420 (Drop Dart): >72 foot-pounds (271.16 N m) for 1/4-inch (6 mm) thick material. • Weather resistance, when tested for 1500 hours in accordance with ASTM G 53 and QUV 313B: • Coating integrity: Intact after testing period. NFRC RATED VALUES U-FACTOR SHGC 0.44 0.31 NFRC CPD: CRY-M-19-00001 51 ¾” Max. Standard Size Outside Curb Dimension Custom Sizes Available SLOPE 101 ½” Max. Outside Curb Dimension Optix® White Acrylic Sheet UV Stabilized, Impact Modified Light Diffusion, High Haze NEW Revolutionary Frame Design Maximizing Glazing Insulation Minimizes Heat Loss Thru Curb All Aluminum, PVC Free LEXAN® Clear 25mm MWS UV Stabilized, High Thermal Rentention PVC FREE DESIGNED SPECIFICALLY TO EXCEED THE STRICTEST ENERGY CODE REQUIREMENTS AND GREEN STANDARDS Welded Corners Internal Frame External Cap CrystaLite, Inc. : www.CrystaLiteInc.com : 1-800-666-6065 Page 1 CrystaLite, Inc. : Skylights : Series 5000

CrystaLite, Inc. : Skylights : Series 5000crystaliteinc.com/_files/skylights/FLYER_5000.pdfCrystaLite, Inc. : Skylights : Series 5000. NFRC RATED VALUES U-FACTOR SHGC 0.44 0.31 NFRC

  • Upload
    halien

  • View
    228

  • Download
    4

Embed Size (px)

Citation preview

Page 1: CrystaLite, Inc. : Skylights : Series 5000crystaliteinc.com/_files/skylights/FLYER_5000.pdfCrystaLite, Inc. : Skylights : Series 5000. NFRC RATED VALUES U-FACTOR SHGC 0.44 0.31 NFRC

NEW revolutionary frame design maximizes glazing

thermal performance and minimizes curb heat loss to

provide unmatched NFRC Rated thermal properties

without the need for expensive nanogel fill substrate.

Featuring clear LEXAN 25mm multiwall sheet on interior is ideal for maintaining conditioned spaces, while the Optix white outer dome maximizes light capture and diffusion while reducing solar heat gain. Ideal for all climate zones.

The Series 5000 is also constructed without any of the ‘red listed’ materi-als often restricted by some green standards. Specifically, it is PVC-free.

Aluminum Frame and Cap complies with the following:

• Aluminum extruded components shall be alloy 6063-T5 or 6063-T6, of sufficient thickness for this application, and as required per structural calculations; ASTM B 221.

• Mill finish per AMS-OQ-A-200/9 and MIL-DTL-25995.• Welded corner construction; interior frame and external cap.

Outer Dome complies with the following:

• ICC-ES listings as CC2 approved plastic complying with Section 2606.4 of the IBC

• ANSI Z97.1 Safety Glazing Requirements• Underwriters Laboratories (UL) listings as UL 94HB & UL746 Compliant• Miami-Dade County Product Notice of Acceptance-Plastics• ASTM D-4802 B-1 Plastics

Inner Polycarbonate MWS complies with the following:

• Fire rating: Class A per ASTM E-84. Class CCI per ASTM D-635. • Maximum Flame Spread/Smoke Development: 5/35• Sound Transmission: STC 21• Impact resistance, when tested in accordance with ASTM D 5420 (Drop

Dart): >72 foot-pounds (271.16 N m) for 1/4-inch (6 mm) thick material.• Weather resistance, when tested for 1500 hours in accordance with

ASTM G 53 and QUV 313B:• Coating integrity: Intact after testing period.

NFRC RATED VALUESU-FACTOR SHGC

0.44 0.31NFRC CPD: CRY-M-19-00001

51 ¾” Max. Standard SizeOutside Curb Dimension

Custom Sizes Available

SLO

PE

101 ½” M

ax.

Outside Curb Dim

ension

Optix® White Acrylic SheetUV Stabilized, Impact ModifiedLight Diffusion, High Haze

NEW Revolutionary Frame DesignMaximizing Glazing InsulationMinimizes Heat Loss Thru Curb

All Aluminum, PVC Free

LEXAN® Clear 25mm MWSUV Stabilized, High Thermal Rentention

PVC FREE

DESIGNED SPECIFICALLY TO EXCEED THE STRICTEST ENERGY CODE REQUIREMENTS AND GREEN STANDARDS

Welded CornersInternal Frame

External Cap

CrystaLite, Inc. : www.CrystaLiteInc.com : 1-800-666-6065 Page 1

CrystaLite, Inc. : Skylights : Series 5000

Page 2: CrystaLite, Inc. : Skylights : Series 5000crystaliteinc.com/_files/skylights/FLYER_5000.pdfCrystaLite, Inc. : Skylights : Series 5000. NFRC RATED VALUES U-FACTOR SHGC 0.44 0.31 NFRC

NFRC RATED VALUESU-FACTOR SHGC

0.44 0.31NFRC CPD: CRY-M-19-00001

Maximum standard sizes are limited by the availability of the polycarbonate multiwall sheets. Custom sizes available upon request.

Also note that the flutes of the polycarbonate multiwall sheet must run in the slope direction.

51 ¾” Max. Standard SizeOutside Curb Dimension

Custom Sizes Available

SLO

PE

101 ½” M

ax.

Outside Curb Dim

ension