CLCS FleFt Lite - FlexFast Lite Ver 2.pdf The CenterLine CLCS FlexFast¢â€‍¢ Lite con«“gured stationary

  • View
    1

  • Download
    0

Embed Size (px)

Text of CLCS FleFt Lite - FlexFast Lite Ver 2.pdf The CenterLine CLCS FlexFast¢â€‍¢...

  • CENTERED ON SOLUTIONS

    www.cntrline.com

    Contact us today to request a quote on the CLCS FlexFast™ Lite.

    The CenterLine CLCS FlexFast™ Lite configured stationary welder is a compact, versatile, welding machine designed for production fastener welding applications.

    This design includes many standard features that ensure the FlexFast Lite produces consistent weld quality, is easily operated, and has minimal maintenance requirements.

    CLCS FlexFast™ Lite

    The smart fastener welding solution.

    The CLCS FlexFast™ Lite offers: ►► Robust construction – up to 13.3kN (3000 lbs) weld force capacity ►► Ability to weld up to M10 sized fasteners - Application/ fastener dependent ►► Low impact, “soft-touch” operation to minimize electrode wear, deflection and part deformation. This promotes higher quality welding and lower maintenance needs. ►► One (1) or two (2) OHMA® air/oil weld actuators with configurable spacing • Able to perform two welds with one set-up; with one weld

    per cycle

    • Accurate control over weld forces over a wide range of air pressure settings

    • Interchangeable lower tooling enables rapid changeover for multi-application needs

    ►►Provides high part quality at a competitive cost

    CLCS HMI Features ►y Reduced cost compared to a PLC and standard HMI

    while maintaining high quality and safety ►y No software license fees ►y Wi-Fi “over-the-air” updates for firmware, if required ►y No programming required ►y Programmable scheduled maintenance notifications ►y Discrete weld control communication ►y Ready to use controller and HMI ►y Dynamic high resolution touch screen ►y Weld and feeder communications ►y Active in-process weld monitoring Simple Standardized Operator Interface

  • HEAD OFFICE: CenterLine (Windsor) Ltd. 415 Morton Drive Windsor, Ontario, Canada N9J 3T8 Visit our website to obtain detailed contact information for each of CenterLine’s operations.

    Head Office Sales Service

    519-734-8464 519-734-6560 519-734-0080

    TELEPHONE 800-820-6977 800-771-6172 800-268-8184

    TOLL-FREE info@cntrline.com sales@cntrline.com service@cntrline.com

    EMAIL

    CENTERED ON SOLUTIONS

    www.cntrline.com © 2019 CenterLine Holdings Inc. FFW-FFL-FCS-FL-PR-2.0-0419

    CLCS FlexFast™ Lite

    Standard & Optional Features

    VeriFast™ LVDT Fastener Detection

    Quick Change Electrode

    Convenience Package - Consists of light, fan, power receptacle & air receptacle

    Light Curtain & Cycle Start

    OHMA Weld Cylinder Additional OHMA Cylinder

    Manual Regulator or Programmable Regulator / Oil Pressure Monitoring

    Up to Two LPT Sensors for Upper Electrode Detection

    Nut or Stud Feeder

    CLCS HMI - Ready to use, no programming necessary

    Standard Electrode

    Notes: Standard Components are listed in black. Optional Components are listed in blue.

    Standard Model One (1) OHMA Cylinder with LPT & VeriFast LVDT Light Curtain Cycle Start Manual Intensification Pressure Regulator Water Saver Valve with water flow switches 480 VAC or 600 VAC input voltage

    Available Options Second OHMA Cylinder with LPT & VeriFast LVDT Programmable Intensification Pressure Regulator with Oil

    Pressure Monitoring 120 V Service Package for Feeder Power

    Convenience Package - requires 120 V Service (Lights, Fan, Electric Receptacle, Air Receptacle)

    Quick Change Electrode, includes additional water flow sensor

    The smart fastener welding solution.

    1.8m

    1.7 5m