CABINETS AND EQUIPMENT - Scanmodul · SCAN MODUL, TRANSPORT AND ISO STORAGE SYSTEMS BASED ON ISO STANDARD 3394 Equipment and logistics systems from Scan Modul are about much more

CABINETS AND

EQUIPMENT Storage

Designed with care for people who care

HEALTHCARE

2

SCAN MODUL, TRANSPORT AND ISO STORAGE SYSTEMS BASED ON ISO STANDARD 3394

Equipment and logistics systems from Scan Modul are about much more than just supplying products and medicines in the usual meaning of the words. The systems help to ensure that the right product, in the right quantity, is in the right place at the right time. In principle, this provides continuous circulation of stock, in other words: Quality assurance! Quality assurance of the products used provides: product safety and improved overall economic benefits.

Scan Modul has over 100 years of industrial experience and is, today, the global market leader in our field. In the last 30 years, Scan Modul has been a pioneer and leading manufacturer of the modular storage concept, based on the 40/60 storage system, for hospitals and clinics. More than 1.500 healthcare institutions are currently using solutions, expertise and services from Scan Modul, which is confirmed by our customers worldwide. Scan Modul has great experience in the healthcare sector's disciplines, and the work processes related to furniture and logistics.

Scan ModulTM

CleanLine

Page 3- 14 CleanLine cabinets

Page 15- 23 Special cabinets

Side 24- 30 Product overview

Page 31- 46 ScanCell®

Page 47- 52 Transport trolleys

Page 53- 56 ScanMo Shelving

Page 57- 75 Modules

Side 76- 77 Stainless steel furniture and OR equipment

Page 78- 79 Material specification

INTELLIGENT STORAGE WITH ENDLESS POSSIBILITIES

With our simple design, we emphasise minimalistic

and calm environment. The modern design creates

a visual calmness in the department.

Behind this calm appearance, hides a highly

functional interior with endless possibilities. Each

cabinet can be organised to match the specific

needs of the department.

Intelligent storage begins with intelligent

modules. All of our modules can be converted

easily into smaller, customised, interchangeable

storage systems. The compartments can be

adjusted to match the size of any item.

3

CleanLine

4

DESIGN AND FUNCTIONALITY WITH RAW STRENGTH

CleanLine is a series of cabinets with a minimalistic design that blends in perfectly anywhere and everywhere. The laminated doors on the CleanLine series can be recognised by their soft rounded edges and the unique visible vertical handle in anodised aluminium.

In the CleanLine series, quality and functionality are crucially important, and there are endless possibilities to customise the interior, so everything has its place.

We have an extensive range of cabinet types, including special cabinets, e.g. fire resistant cabinets, pass-through cabinets, scope cabinets and instrument cabinets. Many of these cabinet types are presented in the product overview later in in this chapter, but don't hesitate to contact us if you have any special needs.

TOP 5 FEATURES FOR CLEANLINE

• External edge strip with rounded corners

• Doors can be delivered with glass allowing quick overview of the contents

• Telescopic runners with 110% pull-out for easy access to the contents.

• The hinges allow the doors to open 270°

• Quiet magnetic lock

CleanLine

5

FRONT OPTIONS

OPEN FRONT

An open front allows easy access to the cabinet's contents.

DOOR

The doors are made from 16 mm chipboard faced with 0.7 mm high-pressure laminate.

GLASS DOOR

Hardened glass fitted in solid frame without joints

ROLLER FRONT

A roller front is the ideal

solution for rooms where there

is limited space for opening

doors.

DRAWER CABINETS

Drawer cabinets are practical for storing smaller items, and we have many different sizes to match your needs. All drawer cabinets are delivered with soft-close as standard.

DRAWERS

We offer two types of drawers:

1. Pull-out drawers for modules with full pull-out, soft-close. These are designed for our standard 40/60 trays and baskets.

2. Drawers with melamine bottom and steel side panels; also with full pull-out, soft-close

1. pull-out drawers

2. regular drawers

CleanLine

6

CABINET SPECIFICATIONS

STANDARD CABINET

MODULES

The sides, top and bottom of the cabinets are made from 19 mm chipboard faced on both sides with melamine (100 g/m2) and a 6 mm back panel. All edges are provided with 1 mm ABS plastic profiles. The front edges have an integrated dust seal, with beading for cabinets with doors, and without beading for open front cabinets.

INFILL PANELS

The infill panels ensure a perfect fit when the cabinets are installed. They are made from 19 mm chipboard faced on both sides with melamine. The infill panels can be provided with a front panel, high pressure laminated in the same colour as the cabinet doors.

HINGES

The unique hinge is made from anodised aluminium and is visible externally. The hinge is provided with plain bushings, which minimises wear and is optimal for many years of daily use. The opening angle is 270 degrees.

EDGE STRIP

The rounded grey plastic edge strip protects the laminate from blows.

MAGNETIC LOCK

The lock system is equipped with a nylon magnetic locks as standard.

LOCKS

All cabinets can be supplied with standard, system or electronic lock.

HANDLES

The 160 mm vertical anodised aluminium handle completes the exclusive CleanLine design.

PLINTH

The plinths are made of 18 mm water resistant plywood with 0.7 mm laminate, in the colour F2297 Terril, dark grey. The plinths are delivered with levelling feet as standard. If a shared plinth is required, this is delivered without levelling feet.

DOORS AND DRAWER FRONTS

CleanLine doors and drawer fronts are characterised by their rounded corners. They are made from 16 mm chipboard faced on both sides with 0.7 mm high-pressure laminate.

CleanLine

7

DRAWERS

Drawers have powder painted steel side panels

and come with full pull-out. Drawer bottoms and

backpieces are made in 16 mm melamine, and

all visible edges are provided with bonded

polypropylene edge strip.

Drawer runners are fitted using Euro screws. The

drawers can be removed, have inbuilt stop and

bear loads up to 30 kg. The drawer sides match the

height of the fronts. Drawers for modules are also

available with full pull-out and soft-close.

LOCKS

The majority of the cabinet models can be delivered with different lock types in the doors and the top drawer.

UNDERCABINETS WITH CASTORS

Under cabinets with castors are called mobile units. The height of the mobile unit's castors is 88 mm. The front castors are fitted with brakes.

8

Overcabinet

CleanLine

DIMENSIONS

WIDTH/DEPTH

TYPE

B

Width: 657 mm Depth: 450 mm

HEIGHT External dimensions

STANDARD COLOUR CHART FOR CABINETS

ELECTRONIC LOCKS

Apart from the standard lock, the CleanLine series is available with electronic locks, which can be fitted on both drawers and doors. The locks are available with both code and RFID systems.

LS101

Pin code 4 digits

Can be set to fixed code

LS300 RFID (MIFARE) / NFC

Programmable via

programming set or

softwareLS200

Pin code 4 digits

Can be set to fixed code or multiple users.

RFID programming

LS400

Pin code / RFID (MIFARE) / NFC

Programmable via programming set

or software

A0673

BLU VIOLETTO

F7912

STORM

M104B

STEEL GREY

K1997

OCEANO

F7879

DUSTY JADE

F2255

POLAR WHITE

K1019

AZUR

F7884

CHINA BLUE

M142B

GREY SILVER

TYPE

A

Width: 457 mm Depth: 650 mm

P

RIC

E C

AT

. 1

BA

SIC

P

RIC

E C

AT

. 2

Tall cabinet incl. plinth 2100 mm

Tall cabinet for wall mount 1826 mm

Tall wall cabinet 1195 mm

Wall cabinet 650 mm

Top cabinet 581 mm

Under cabinet incl. plinth 905 mm

Under cabinet for hanging 581 mm 389 mm

Drawer cabinet for hanging 171 mm 140 mm

M138B

WHITE ALPINO

F7880

THISTLE X

F7927

FOLKSTONE

9

WORKTOP LAMINATE

Worktop with postformed front edge, straight rear edge

Wor ktop with straight edges on 4 sides model 604

Worktops are ordered in the desired length.

Worktops with intermediate length are calculated from the closest size.

ACCESSORIES WORKTOPS

CleanLine

LENGTH DEPTH DEPTH DEPTH

600 mm 450 mm 600 mm 650 mm

900 mm 450 mm 600 mm 650 mm

1200 mm 450 mm 600 mm 650 mm

1800 mm 450 mm 600 mm 650 mm

2100 mm 450 mm 600 mm 650 mm

2400 mm 450 mm 600 mm 650 mm

2700 mm 450 mm 600 mm 650 mm

3000 mm 450 mm 600 mm 650 mm

RESISTANCE CHART FOR WORKTOPS

Organic solvents Acid / alkali Heat resistant Deformation Impact resistance Discolouration Surface smoothness Absorption

Laminate

Compact laminate

Polypropylene

Stainless steel 316/304 /

Epoxy Resin

Composite

Ceramic

Excellent Good Acceptable

SHELVES

Shelving is also available as wall-mounted systems. Please contact your local sales office or a sales rep, who will be happy to help you find the perfect solution for your particular needs.

ITEM NUMBER DEPTH

Worktop bracket - height 300 mm 7313030 300 mm

Worktop bracket height 300, lacquered 7313040 400 mm

7313055 550 mm

Supports, epoxy lacquered - height 500 mm 7313056 560 mm

7313076 760 mm

Supports ready for shelves, epoxy lacquered H 500 mm

7313090 560 mm

Installation bracket, epoxy lacquered 3x30x560 mm SAB 50

SHELVES FOR CABINETS WITH MODULAR SIDE PANELS DEPTH

Compact laminate panel 300x400x6 mm 2234400

Compact laminate panel 400x600x6 mm 2264400

Melamine panel, white 300x400x12 mm 2234403

Melamine panel, white 400x600x12 mm 2264403

Wor ktop with postformed front edge and rear upstand

jan.spring

Udstregning

10

Wall-mounted with space for electrical duct

Wall-mounted electronic patient journal (EPJ) table

• Scan Modul exclusively uses LINAK motors on ourheight adjustable tables.

Contact our sales or our offices if you would like more information about our range of adjustable height worktops.

Scan Modul offers both tables that are fitted close to the wall or fitted with space for installations, e.g. electrical ducts (as shown below).

•

Scan Modul offers a wide range of standard or customised height adjustable tables:

• Height adjustable tables increase the flexibility of theworkplace and guarantee an ergonomic working posture

Height adjustable tables

CleanLine

12

VARIOTILT CABINET SIDE PANELS

VARIOFLEX CABINET SIDE PANELS

TELESCOPIC RUNNERS

Injection moulded cabinet side

panel for horizontal inserts.

This cabinet side panel allows

the trays to be pulled out and

tilted to provide better access

to the contents.

Fitted with inbuilt stop function.

It can be fitted with removable

load relief wheels at the front

edge of the panel for safe and

easy pull-out of trays holding

heavy products.

The quality of the injection

moulding is more durable than

the traditional vacuum

moulded version. Max load 20

kg per insert.

Injection moulded cabinet side

panel for angled and horizontal

inserts.

This patented cabinet side

panel allows angled inserts,

providing a better view of the

products in the top trays.

Fitted with inbuilt stop

function. It can be fitted with

removable load relief wheels

at the front edge of the panel

for safe and easy pull-out of

trays holding heavy products.

Max load 20 kg per insert.

Stainless steel telescopic

runners fitted on perforated

rails.

The perforated rails can be

adjusted with 25 mm spacing.

This solution is recommended

for storing heavy products, and

where 110 % pull-out is

required. Normally fitted in

cabinets from the working

height down to the floor.

Our trays and baskets

can be placed directly

on the telescopic

runners without any

need for tools.

Max load 50 kg per insert.

Many of the cabinets in the product overview already include cabinet side panels or telescopic runners, but, if you wish to buy these separately, they are listed at the end of the product overview in this chapter.

CABINET FITTINGS

CleanLine

The cabinets can be fitted in various ways:

• VarioTilt or VarioFlex cabinet side panels provide flexiblestorage based on the ISO storage systems with 40x60 cm traysand baskets

• Telescopic runners, when you need drawers with easy access

• Regular shelves for basic storage needs

We also offer solutions based on a combination of these options.

12

350

650

457

Storage cabinet with A insert 4060

650

2100

935

650

100

30

805

650

2100

13

Storage cabinets with B insert 4060

350

480

450

450

657

2100

935

650

100

30

805

650

2100

14

PASS-THROUGH CABINETS

Height 2100 mm

Width: 457 mm

Depth: 670 mm

Height 2100 mm Width: 657 mm Depth: 470 mm

Pass-through cabinet type A - viewed from the top.

Pass-through cabinet type B - viewed from the top.

Cabinets

470

670 457

657

2100

2100

Cabinets

WALL REINFORCEMENT FOR INSTALLATION

15

Special cabinets

16

Special cabinets

17

FIRE RETARDANT CABINETS (BD30)/LEAD PROTECTED CABINETS Model 762 pass-through Model 732 not pass-through

CABINET DIMENSIONS For cabinets: H1864xW694xD525mm – without plinth H1864xW494xD725mm – without plinth H2038xW694xD525mm – with plinth, total height 2119mm H2038xW494xD725mm – with plinth, total height 2119mm

For pass-through cabinets: H1864xW694xD545mm – without plinth H1864xW494xD745mm – without plinth H2038xW694xD545mm – with plinth, total height 2119 mm H2038xW494xD745mm – with plinth, total height 2119 mm Fire retardant cabinets/pass-through cabinets are used in corridors between the corridor and rooms, for example, cleaning rooms, wards, operating theatres, medicine rooms etc.

APPROVAL According to the Fire Resistance Assessment - from the Danish Institute of Fire and Security Technology - 17.06.2004, the cabinets comply with the requirements in DS 1051.2 for a BD pass-through cabinet 30 (test report B 17640 b). The doors have Danish Standard certification license number 671E. The relevant assessment is available. It should be noted that the responsible local fire authority should always be contacted for final approval before commissioning.

TECHNICAL SPECIFICATION The cabinet/pass-through cabinet comprises a standard cabinet/pass-through cabinet, where one cabinet door is replaced by a single-leaf door - panel thickness 40 mm. On the outside of the door leaf, a 19 mm Cleanline cabinet door is affixed. The fire doors are fitted with a vertical door handle latch, which is activated by turning the handle.

If the cabinet is to be delivered without plinth, a moulding on the outer door and a steel moulding, which is milled in, and fastened to, the floor, are enclosed. The joints between pass-through cabinets and adjoining building elements are filled with stone wool, which is enclosed.

INSTALLATION Pay attention to the fact that the distance to the closest perpendicular wall, up to which the door will be opened, has to be at least 400 mm, allowing trays and baskets to be pulled out of the modular side panels. The 400 mm should be part of the building and not part of Scan Modul's delivery. There must be at least 2 layers of plasterboard or concrete, masonry or other fireproof material. If fitted by the customer, the enclosed regulations from Trehøjde Døre A/S must be followed, otherwise the installation requirements for fire protection will not be met.

Free height: 2139 mm (2119 =standard cabinet height + 10 mm)/1864 + 20 mm = 1884 mm

Free width: Cabinet dimensions + 10 mm on each side = +20 mm

Special cabinets

18


Technical sectional drawing

Special cabinets

19

FIRE RETARDANT CABINETS (BD30)/LEAD PROTECT CABINETS Model 762 pass-through Model 732 not pass-through

Introduction It is of great importance for the doors' fire and/or acoustic properties that it be fitted correctly. The person fitting the door is responsible for ensuring it is fitted as stipulated in this installation instruction. Before starting to fit the door, check that the frame dimensions and the size of the hole in the wall match, according to the requirements given below for the width of the joints between the frame and the adjoining building elements. If these size requirements are not met, the stipulated joint width must made, following agreement with the building management, in a way that does not degrade the door's fire and/or acoustic properties.

Securing the frame Place the assembled frame in the hole in the wall and wedge the frame into place horizontally and vertically at each corner (fig. 1). Fasten/wedge the frame to the adjoining building elements in at least 3 places on each side of the frame (fig. 1) and, for double-leaf doors, also at least one place (centre) of the frame's top section. Before final fixing, check that

• the frame is vertical and horizontal and

• that the frame is correctly placed in relation to the finished floor,

so the door leaf is free of the floor when opening to 90/180

degrees

Joint widths

After securing the frame in place and fitting the door leaf,

• the joints between the frame and the walls should have a width between 5 and 20 mm (fig. 2).

• the distance between the edge of the door leaf to the frame rebate on the side and top frame, as well as the centre joint for double-leaf doors, should not be greater than 3 mm (fig. 3).

• the distance from the bottom edge of the door leaf to the frame rebate in the bottom section (with stop) must not be greater than 6 mm (fig. 4).

If the frame is installed without a bottom section, the distance from the door leaf's bottom edge to non-flammable floor, or to a visible steel or brass rail in the flooring, must not exceed 6 mm (fig. 5). For an acoustic door, the seal against the stop has to be checked by seeing if there is any noticeable friction when a piece of paper is pulled through the stop (fig. 6).

Special cabinets

20


Filling The joints between frame and wall must be filled with mineral wool compressed to a density corresponding to 3 m of mineral wool strip, 60 mm x 20 mm, per running metre of 10 mm wide joint (fig. 7). Between the bottom section and the raw floor (the load bearing structure), the entire width and depth of the bottom section must be filled with mineral wool, as described for the joints between frame and wall. In addition, the joints enclosing an acoustic door 30 dB or above must be sealed effectively using an elastic sealant against the hottest/internal side of the door (fig. 8).

Door fittings The door has to be fitted with the stipulated fittings and fixings EI2 3-C, E 30-C, EI2 60-C with door closer (BD-30, F-30 and BD-60), and (for double-leaf doors) espagnolette and door selector, and any other fittings, after which it has to be checked.

• that the door leaf, and the lock's latch, can be moved freely.

• that the latch engages when the door closer closes the door

leaf from an opening greater than or equal to 300 mm.

• that the self-closing espagnolette (for double-leaf doors)

engages when the first closing door closes from an opening

as stated above, and that the door selector is working

correctly.

Locks that can prevent the doors from closing completely and the retaining fixings engaging (e.g. lock with bolt), may only be used for EI2, (BD doors) following prior agreement of the authorities. For a EI2, (BD-30M) door, the door is not required to be self-closing. Alternatively, fittings (except for escutcheons, keyhole plates, kick plates, sealing strips and door closers) shall have a melting point of at least 850 degrees C.

Other regulations

Milling, cutting or other machining of the door leaf and frame is not permitted. It is not permitted to fit letter boxes and spy holes. Flammable flooring, e.g. carpet, must not be inserted under the door leaf nor under the steel or brass rail, which possibly replace the bottom section. The DS markings must not be painted over. Fire sealant can be painted over, but not levelled out.

21

A

A ( 1 : 4 )

Fire resistant cabinet, pass-through Type A - Incl. plinth

457

494

19

745

2038

650

2100

2000

75

100

81

2119

22

A

A ( 1 : 4 )

Fire resistant cabinet, pass-through Type B - Incl. plinth

657

694

19

545

2038

450

75

2100

2000

100

81

2119

25

Tall cabinet with standard door Width Depth Pull-out Hinges

Instrument cabinets with standard door, 1 to 3 pull-outs with perforated panel for instrument hooks. Height 2100 mm, with plinth

457 650 1 Right / Left



Tall cabinet with glass door

Instrument cabinets with glass door, 1 to 3 pull-outs with perforated panel for instrument hooks. Height 2100 mm, with plinth

Tall over cabinet with standard door

Instrument cabinets with standard door, 1 to 3 pull-outs with perforated panel for instrument hook Height 1200 mm.

Tall over cabinet with glass door

Instrument cabinet with glass door, 1 to 3 pull-outs with perforated panel for instrument hooks.

Height 1200 mm.

PULL-OUT PANELS Melamine panel with mounted perforated panel in white lacquered steel, 110% telescopic pull-out.

INSTRUMENT HOOKS Stainless steel instrument hooks, alternatively, Rilsan coated steel. Metal colour / grey.

COLOURS For choice of laminate colours for fronts,

INSTRUMENT

CABINETS

Instrument cabinets










24

INSTALLATION OF MEDICINE CABINETS

The Scan Modul medicine cabinet is an excellent alternative, when an institution / clinic does not have a dedicated and locked medicine room. The medicine cabinet is available with and without a drug box. It can also be combined with the refrigerator Porkka MC70, as shown in the example in the picture.

25

Product Overview

TALL CABINETS - H 2100 MM, INCL. 100 MM PLINTH

WIDTH

DEPTH

Tall cabinet, 1 door, incl. VarioTilt™ and

100 mm plinth

(Also available with glass door)

357 mm

457 mm

657 mm

450 mm

650 mm

450 mm

Tall cabinet, double door, incl. VarioTilt™

and 100 mm plinth


657 mm

450 mm

Tall cabinet, no door, incl. VarioTilt™ and

100 mm plinth

357 mm

457 mm

657 mm

450 mm

650 mm

450 mm

Tall cabinet, 1 door, incl. 4 shelves

and 100 mm plinth


457 mm

657 mm

457 mm

657 mm

650 mm

450 mm

450 mm

650 mm

Tall cabinet, double door, incl. 4 shelves

and 100 mm plinth


914 mm

914 mm

450 mm

650 mm

Tall cabinet, no door, incl. 4 shelves

and 100 mm plinth

457 mm

657 mm

630 mm

430 mm

Parking cabinet, double door, incl. 3

shelves at the top and U plinth

914 mm

914 mm

450 mm

650 mm

Wardrobe, 1 door, incl.

hanging rail and 1 shelf

and 100 mm plinth

457 mm

657 mm

650 mm

450 mm

TALL CABINETS - H 2100 MM, INCL. 100 MM PLINTH

WIDTH

DEPTH

Wardrobe, 1 door

incl. hanging rail and 1 shelf and

100 mm plinth

657 mm

450 mm

Scope cabinet, 1 door

incl. 1 pull-out panel (B 457)

incl. 2 pull-out panels (B 657)

(exc. hangers for scopes) incl.

100 mm plinth

457 mm

657 mm

657 mm

650 mm

450 mm

650 mm

Tall cabinet with roller front

incl. VarioTilt™ and 100 mm plinth

457 mm

657 mm

680 mm

480 mm

Tall cabinet, no door, modular

sides for fitting other cabinet side

panels incl. 100 mm plinth

457 mm

657 mm

630 mm

430 mm

Tall cabinet, 1 door, modular sides

for fitting other cabinet side

panels incl. 100 mm plinth


457 mm

657 mm

650 mm

450 mm

Fire retardant cabinet, 1 door,

incl. VarioTilt™

BD30 on door, incl. frame

(H 2038 mm - item no. is excl. plinth)

494 mm

694 mm

725 mm

525 mm

Bedpan/storage cabinet, clean, 1

door incl. VarioTilt™

with Telco oven

657 mm

450 mm

Bedpan/storage cabinet, unclean, 1

door incl. VarioTilt™

with 100 mm studs for oven

with air gap in the bottom

657 mm

450 mm

26

Product Overview

TALL CABINETS - H 2100 MM

WIDTH

DEPTH

Medicine cabinet with pull-out

front 10 (W257) or 20 (W357)

medicine trays

(Exc. partitions for trays)

257 mm

357 mm

650 mm

650 mm

TALL CABINETS - H 1826 MM FOR WALL MOUNTING

WIDTH

DEPTH

Tall cabinet, 1 door, incl.

VarioTilt™ (Also available with

glass door)

457 mm

657 mm

650 mm

450 mm

Tall cabinet, 1 door, incl. 4

shelves (Also available with

glass door)

457 mm

657 mm

650 mm

450 mm

Tall cabinet, no door, incl. VarioTilt™

457 mm

657 mm

630 mm

430 mm

Tall cabinet, 1 door, modular sides for

fitting other cabinet side panels (Also

available with glass door)

457 mm

657 mm

650 mm

450 mm

Fire retardant cabinet, 1 door,

incl. VarioTilt™

BD30 on door, incl. BD30

frame(H 1864 mm)

494 mm

694 mm

725 mm

525 mm

Bedpan/storage cabinet, clean, 1

door with Telco oven, incl.

VarioTilt™

657 mm

450 mm

Bedpan/storage cabinet, unclean, 1

door with 100 mm studs for oven

with air gap in the

bottom, incl. VarioTilt™

657 mm

450 mm

Wardrobe, 1 door, incl.

hanging rail and 1 shelf

657 mm

650 mm

TALL CABINETS - H 2100 MM PASS-THROUGH

WIDTH

DEPTH

Pass-through cabinet, incl. VarioTilt™ and

100 mm plinth

(Also available with glass doors)

457 mm

657 mm

670 mm

470 mm

Fire retardant pass-through cabinet

BD30 on 1 door

Incl. BD30 frame

Incl. VarioTilt™


494 mm

694 mm

745 mm

545 mm

Fire retardant pass-through cabinet with

2 mm lead lining

BD30 and lead lining on 1

door incl. BD30 frame

incl. VarioTilt™


494 mm

694 mm

745 mm

545 mm

27

Product Overview

TALL CABINETS - H 1826 MM, BUILT IN

WIDTH

DEPTH

Tall pass-through cabinet,

incl. VarioTilt™

(Also available with glass doors)

457 mm

657 mm

670 mm

470 mm

Fire retardant pass-through cabinet,

BD30 on door, incl. BD30 frame

incl. VarioTilt™

(H 1864 mm)

494 mm

694 mm

745 mm

545 mm

Fire retardant cabinet with 2 mm

lead lining, Bd30/lead lining on 1

door, incl. BD30 frame

incl. VarioTilt™

(H 1864 mm)

494 mm

694 mm

745 mm

545 mm

TALL OVER CABINETS - H 1195 MM

WIDTH

DEPTH

Medicine cabinet, 1 door

incl. 5 indented shelves, 1

straight shelf, 1 pull-out shelf,

medicine rack, light

657 mm

450 mm

Medicine cabinet, 1 door

incl. 3 indented shelves, poison

box with lock, 1 straight shelf, 1

pull-out shelf, medicine rack,

light

657 mm

450 mm

Bag cabinet/personal locker with 3

or 6 doors

(Also available with mailbox)

332 mm

657 mm

450 mm

450 mm

Instrument cabinet, 1 door

incl. 1 pull-out with perforated panel

(W457) incl. 2 pull-outs with

perforated panels (W657)

457 mm

657 mm

650 mm

450 mm

TALL OVER CABINETS - H 1195 MM

WIDTH

DEPTH

Tall over cabinet, no

door, incl. VarioTilt™

357 mm

657 mm

457 mm

430 mm

430 mm

630 mm

Tall over cabinet, 1

door, incl.

VarioTilt™


357 mm

457 mm

657 mm

450 mm

650 mm

450 mm

Tall over cabinet, 1

door, 3 shelves


457 mm

657 mm

650 mm

450 mm

Tall over cabinet with roller

front, incl. VarioTilt™

457 mm

657 mm

680 mm

480 mm

WALL CABINETS - H 650 MM

WIDTH

DEPTH

Wall cabinet, 1 door, incl.

VarioTilt™ (Also available with

glass door)

457 mm

357 mm

657 mm

457 mm

350 mm

450 mm

450 mm

650 mm

Wall cabinet, 1 door, incl. 1

shelf (Also available with

glass door)

457 mm

457 mm

657 mm

657 mm

350 mm

450 mm

350 mm

450 mm

Wall cabinet, double door, incl. 1

shelf (Also available with glass door)

914 mm

914 mm

350 mm

450 mm

28

Cabinets

Product Overview

WALL CABINETS - H 650 MM

WIDTH

DEPTH

Wall cabinet, no door, incl. VarioTilt™

457 mm

657 mm

330 mm

430 mm

Wall cabinet, no door, incl. 1 shelf

457 mm

657 mm

657 mm

330 mm

330 mm

430 mm

Wall cabinet with sliding

glass doors and 1 shelf

(Not available with lock)

1,200 mm

350 mm

Wall cabinet with roller

front incl. VarioTilt™

657 mm

480 mm

UNDER CABINETS - H 905 MM, INCL. 100 MM PLINTH

WIDTH

DEPTH

Undercabinet, 1

door, incl.

VarioTilt™

incl. 100 mm plinth

357 mm

457 mm

657 mm

450 mm

650 mm

450 mm

Undercabinet, 1 door

incl. 1 shelf

incl. 100 mm plinth

457 mm

657 mm

657 mm

650 mm

450 mm

650 mm

Undercabinet, double

door, incl. 1 shelf

incl. 100 mm plinth

914 mm

914 mm

1,314 mm

450 mm

650 mm

650 mm

Under cabinet with roller

front incl. VarioTilt™

incl. 100 mm plinth

457 mm

657 mm

680 mm

480 mm

Undercabinet, no

door, incl. VarioTilt™

incl. 100 mm plinth

357 mm

457 mm

657 mm

430 mm

630 mm

430 mm

Undercabinet, no

door, incl. 1 shelf

incl. 100 mm plinth

457 mm

657 mm

630 mm

430 mm

Bag cabinet/personal locker with 2

or 4 doors

incl. 100 mm plinth

(Also available with mailbox)

332 mm

657 mm

450 mm

450 mm

Housing unit for

fridge incl. 100 mm

plinth

657 mm

657 mm

450 mm

650 mm

OVER CABINETS - H 581 MM

WIDTH

DEPTH

Wall cabinet, 1 door

(For fitting above tall cabinet)

457 mm

657 mm

650 mm

450 mm

Wall cabinet, double door

(For fitting above tall cabinet)

914 mm

450 mm

29

Product Overview

UNDER CABINETS - H 905 MM, INCL. 100 MM PLINTH

WIDTH

DEPTH

Drawer cabinet, 2 + 1 std.

drawers incl. 100 mm plinth

(Full pull-out)

457 mm

657 mm

657 mm

650 mm

450 mm

650 mm

Drawer cabinet, 3 + 1 std.

drawers incl. 100 mm plinth

(Full pull-out)

457 mm

457 mm

657 mm

657 mm

450 mm

650 mm

450 mm

650 mm

Drawer cabinet, 5 std.

drawers incl. 100 mm

plinth

(Full pull-out)

457 mm

657 mm

650 mm

650 mm

Drawer cabinet, 5 drawers For

catheters incl. fixed top panel H

126 mm incl. 5 partitions per

drawer

incl. 100 mm plinth

1,314 mm

1,314 mm

1,371 mm

1,571 mm

450 mm

650 mm

650 mm

650 mm

Drawer cabinet, 3 pull-out

frames for modules (3 x 200

mm) incl. 100 mm plinth

457 mm

657 mm

650 mm

450 mm

Drawer cabinet, 3 + 1 pull-out frames

for modules (3 x 200 mm and 1 x 200)

incl. 100 mm plinth

457 mm

657 mm

650 mm

450 mm

Drawer cabinet, 5 pull-out

frames for modules (5 x 100

mm) incl. 100 mm plinth

457 mm

657 mm

650 mm

450 mm

UNDERCABINETS - H 905 MM, INCL. 100 MM PLINTH

WIDTH

DEPTH

Sink cabinet, 1

door, incl. 100 mm

plinth

457 mm

657 mm

657 mm

650 mm

450 mm

650 mm

Sink cabinet, double door,

incl. 100 mm plinth

914 mm

914 mm

450 mm

650 mm

UNDERCABINETS FOR HANGING H 581 MM

WIDTH

DEPTH

Undercabinet, 1 door, incl. VarioTilt™

457 mm

650 mm

Drawer cabinet, 4 pull-out frames

for modules (4 x 100 mm)

657 mm

457 mm

450 mm

650 mm

30

Cabinets

Product Overview

UNDERCABINETS FOR HANGING H 389 MM

WIDTH

DEPTH

Drawer cabinet, 1 + 2 pull-out frames for

modules (2 x 50 and 1 x 100 mm)

657 mm

457 mm

450 mm

650 mm

CABINET SIDE PANELS WITH BRACKETS - TALL CABINET PARTS

WIDTH

DEPTH

VarioFlex (angled/straight

insert) Number of inserts:

23

Distance between inserts: 75 mm

(3") Type A

400 mm

600 mm


insert) Number of inserts:

23


(3") Type B

600 mm

400 mm

VarioTilt (straight

insert) Number of

inserts: 50

Distance between inserts: 37.5 mm

(1½") Type A

400 mm

600 mm

VarioTilt (straight

insert) Number of

inserts: 50


(1½") Type B

600 mm

400 mm

VarioFlex (angled/straight insert) - Perforated rail

1. Number of inserts: 11

Distance between inserts: 75 mm (3")

2. Hole separation: 25

mm (1") Type A

400 mm

600 mm

VarioFlex (angled/straight insert) - Perforated rail


Distance between inserts: 75 mm (3")


mm (1") Type B

600 mm

400 mm

VarioTilt (straight insert) - Perforated rail


Distance between inserts: 37.5 mm (1½")


mm (1") Type A

400 mm

600 mm

Cabinet side panel (straight insert) - Perforated rail


Distance between inserts: 37.5 mm (1½")


mm (1") Type B

600 mm

400 mm

VarioTilt (straight insert)

for pass-through cabinets

Number of inserts: 50

Distance between inserts: 37.5mm

(1½") Type A

400 mm

600 mm


for pass-through cabinets


Distance between inserts: 37.5mm

(1½") Type B

600 mm

400 mm

Cabinet side panels with brackets

(straight insert) Number of inserts: 44

Distance between inserts: 40 mm Type A

400 mm

600 mm

Cabinet side panels with brackets

(straight insert) Number of inserts: 44

Distance between inserts: 40 mm Type B

600 mm

400 mm

DRAWER - FOR HANGING H 171 MM

WIDTH

DEPTH

Drawer unit, 1 pull-out frame for

1 x 100 mm modules

657 mm

457 mm

450 mm

650 mm

DRAWER - FOR HANGING H 140 MM

WIDTH

DEPTH

Drawer unit, 1 pull-out frame for

1 x 50 mm modules

657 mm

457 mm

450 mm

650 mm

Product Overview

SHELVES

WIDTH

DEPTH

Melamine shelves (12 mm)

for use together with

VarioTilt cabinet side panels

400 mm

300 mm

600 mm

400 mm

Cabinets without cabinet side panels with brackets are available with a

number of shelves included – these are 19 mm or 22 mm thick,

depending on the width of the cabinet. Contact your local sales rep, if

you have use for additional shelves for these types of cabinets.

31

CABINET SIDE PANELS WITH BRACKETS - UNDERCABINET PARTS

WIDTH

DEPTH

VarioFlex (angled/straight insert)


Distance between inserts: 75

mm Type A

400 mm

600 mm



Distance between inserts: 75

mm Type B

600 mm

400 mm

VarioTilt (straight

insert) Number of

inserts: 20


(1½") Type A

400 mm

600 mm

VarioTilt (straight

insert) Number of

inserts: 20


(1½") Type B

600 mm

400 mm

Perforated rail for telescopic

runner Hole separation: 25

mm (1") Type A

400 mm

600 mm



mm (1") Type B

600 mm

400 mm

TELESCOPIC RUNNERS AND PERFORATED RAILS

WIDTH

DEPTH



mm (1") Type A

400 mm

600 mm



mm (1") Type B

600 mm

400 mm

Perforated rail for tall cabinet

Height 1900 mm


Height 1,550 mm


Height 900 mm


Height 650 mm

Telescopic runners, 1

set in stainless steel

for fitting on perforated

rail Type A

600 mm

Telescopic runners, 1

set in stainless steel


rail Type B

400 mm

Telescopic runners

for pass-through cabinets, 1

set in stainless steel,


rail Type A

600 mm

CABINET SIDE PANELS WITH BRACKETS - TALL CABINET PARTS

WIDTH

DEPTH




(3") Type A

400 mm

600 mm




(3") Type B

600 mm

400 mm




(1½") Type A

400 mm

600 mm




(1½") Type B

600 mm

400 mm




(1½") Type D

300 mm

400 mm


insert) Number of inserts: 5

Distance between inserts: 75mm

(3") Type B

600 mm

400 mm




(1½") Type B

600 mm

400 mm

DENMARK:

[email protected] +45 48 22 88 66 +45 97 52 35 33

NORWAY: [email protected] +47 22 20 78 00 +47 22 20 78 01

SWEDEN: [email protected] +46 8 702 99 10

SWITZERLAND: [email protected] +41 61 3 016 301

NETHERLANDS: [email protected] +31 30 6 345 345 +31 30 6 345 300

GERMANY: [email protected] +49 74 6 196 740

SPAIN: [email protected] +34 934 797 465

FRANCE: [email protected] +33 4 74 99 03 30 +33 4 74 99 03 33

OTHER COUNTRIES: [email protected]

Designed with care for people who care

mailto:[email protected]









Documents

CABINETS AND EQUIPMENT - Scanmodul · SCAN MODUL, TRANSPORT AND ISO STORAGE SYSTEMS BASED ON ISO STANDARD 3394 Equipment and logistics systems from Scan Modul are about much more