CABINETS AND
EQUIPMENT Storage
Designed with care for people who care
HEALTHCARE
2
SCAN MODUL, TRANSPORT AND ISO STORAGE SYSTEMS BASED ON ISO STANDARD 3394
Equipment and logistics systems from Scan Modul are about much more than just supplying products and medicines in the usual meaning of the words. The systems help to ensure that the right product, in the right quantity, is in the right place at the right time. In principle, this provides continuous circulation of stock, in other words: Quality assurance! Quality assurance of the products used provides: product safety and improved overall economic benefits.
Scan Modul has over 100 years of industrial experience and is, today, the global market leader in our field. In the last 30 years, Scan Modul has been a pioneer and leading manufacturer of the modular storage concept, based on the 40/60 storage system, for hospitals and clinics. More than 1.500 healthcare institutions are currently using solutions, expertise and services from Scan Modul, which is confirmed by our customers worldwide. Scan Modul has great experience in the healthcare sector's disciplines, and the work processes related to furniture and logistics.
Scan ModulTM
CleanLine
Page 3- 14 CleanLine cabinets
Page 15- 23 Special cabinets
Side 24- 30 Product overview
Page 31- 46 ScanCell®
Page 47- 52 Transport trolleys
Page 53- 56 ScanMo Shelving
Page 57- 75 Modules
Side 76- 77 Stainless steel furniture and OR equipment
Page 78- 79 Material specification
INTELLIGENT STORAGE WITH ENDLESS POSSIBILITIES
With our simple design, we emphasise minimalistic
and calm environment. The modern design creates
a visual calmness in the department.
Behind this calm appearance, hides a highly
functional interior with endless possibilities. Each
cabinet can be organised to match the specific
needs of the department.
Intelligent storage begins with intelligent
modules. All of our modules can be converted
easily into smaller, customised, interchangeable
storage systems. The compartments can be
adjusted to match the size of any item.
3
CleanLine
4
DESIGN AND FUNCTIONALITY WITH RAW STRENGTH
CleanLine is a series of cabinets with a minimalistic design that blends in perfectly anywhere and everywhere. The laminated doors on the CleanLine series can be recognised by their soft rounded edges and the unique visible vertical handle in anodised aluminium.
In the CleanLine series, quality and functionality are crucially important, and there are endless possibilities to customise the interior, so everything has its place.
We have an extensive range of cabinet types, including special cabinets, e.g. fire resistant cabinets, pass-through cabinets, scope cabinets and instrument cabinets. Many of these cabinet types are presented in the product overview later in in this chapter, but don't hesitate to contact us if you have any special needs.
TOP 5 FEATURES FOR CLEANLINE
• External edge strip with rounded corners
• Doors can be delivered with glass allowing quick overview of the contents
• Telescopic runners with 110% pull-out for easy access to the contents.
• The hinges allow the doors to open 270°
• Quiet magnetic lock
CleanLine
5
FRONT OPTIONS
OPEN FRONT
An open front allows easy access to the cabinet's contents.
DOOR
The doors are made from 16 mm chipboard faced with 0.7 mm high-pressure laminate.
GLASS DOOR
Hardened glass fitted in solid frame without joints
ROLLER FRONT
A roller front is the ideal
solution for rooms where there
is limited space for opening
doors.
DRAWER CABINETS
Drawer cabinets are practical for storing smaller items, and we have many different sizes to match your needs. All drawer cabinets are delivered with soft-close as standard.
DRAWERS
We offer two types of drawers:
1. Pull-out drawers for modules with full pull-out, soft-close. These are designed for our standard 40/60 trays and baskets.
2. Drawers with melamine bottom and steel side panels; also with full pull-out, soft-close
1. pull-out drawers
2. regular drawers
CleanLine
6
CABINET SPECIFICATIONS
STANDARD CABINET
MODULES
The sides, top and bottom of the cabinets are made from 19 mm chipboard faced on both sides with melamine (100 g/m2) and a 6 mm back panel. All edges are provided with 1 mm ABS plastic profiles. The front edges have an integrated dust seal, with beading for cabinets with doors, and without beading for open front cabinets.
INFILL PANELS
The infill panels ensure a perfect fit when the cabinets are installed. They are made from 19 mm chipboard faced on both sides with melamine. The infill panels can be provided with a front panel, high pressure laminated in the same colour as the cabinet doors.
HINGES
The unique hinge is made from anodised aluminium and is visible externally. The hinge is provided with plain bushings, which minimises wear and is optimal for many years of daily use. The opening angle is 270 degrees.
EDGE STRIP
The rounded grey plastic edge strip protects the laminate from blows.
MAGNETIC LOCK
The lock system is equipped with a nylon magnetic locks as standard.
LOCKS
All cabinets can be supplied with standard, system or electronic lock.
HANDLES
The 160 mm vertical anodised aluminium handle completes the exclusive CleanLine design.
PLINTH
The plinths are made of 18 mm water resistant plywood with 0.7 mm laminate, in the colour F2297 Terril, dark grey. The plinths are delivered with levelling feet as standard. If a shared plinth is required, this is delivered without levelling feet.
DOORS AND DRAWER FRONTS
CleanLine doors and drawer fronts are characterised by their rounded corners. They are made from 16 mm chipboard faced on both sides with 0.7 mm high-pressure laminate.
CleanLine
7
DRAWERS
Drawers have powder painted steel side panels
and come with full pull-out. Drawer bottoms and
backpieces are made in 16 mm melamine, and
all visible edges are provided with bonded
polypropylene edge strip.
Drawer runners are fitted using Euro screws. The
drawers can be removed, have inbuilt stop and
bear loads up to 30 kg. The drawer sides match the
height of the fronts. Drawers for modules are also
available with full pull-out and soft-close.
LOCKS
The majority of the cabinet models can be delivered with different lock types in the doors and the top drawer.
UNDERCABINETS WITH CASTORS
Under cabinets with castors are called mobile units. The height of the mobile unit's castors is 88 mm. The front castors are fitted with brakes.
8
Overcabinet
CleanLine
DIMENSIONS
WIDTH/DEPTH
TYPE
B
Width: 657 mm Depth: 450 mm
HEIGHT External dimensions
STANDARD COLOUR CHART FOR CABINETS
ELECTRONIC LOCKS
Apart from the standard lock, the CleanLine series is available with electronic locks, which can be fitted on both drawers and doors. The locks are available with both code and RFID systems.
LS101
Pin code 4 digits
Can be set to fixed code
LS300 RFID (MIFARE) / NFC
Programmable via
programming set or
softwareLS200
Pin code 4 digits
Can be set to fixed code or multiple users.
RFID programming
LS400
Pin code / RFID (MIFARE) / NFC
Programmable via programming set
or software
A0673
BLU VIOLETTO
F7912
STORM
M104B
STEEL GREY
K1997
OCEANO
F7879
DUSTY JADE
F2255
POLAR WHITE
K1019
AZUR
F7884
CHINA BLUE
M142B
GREY SILVER
TYPE
A
Width: 457 mm Depth: 650 mm
P
RIC
E C
AT
. 1
BA
SIC
P
RIC
E C
AT
. 2
Tall cabinet incl. plinth 2100 mm
Tall cabinet for wall mount 1826 mm
Tall wall cabinet 1195 mm
Wall cabinet 650 mm
Top cabinet 581 mm
Under cabinet incl. plinth 905 mm
Under cabinet for hanging 581 mm 389 mm
Drawer cabinet for hanging 171 mm 140 mm
M138B
WHITE ALPINO
F7880
THISTLE X
F7927
FOLKSTONE
9
WORKTOP LAMINATE
Worktop with postformed front edge, straight rear edge
Wor ktop with straight edges on 4 sides model 604
Worktops are ordered in the desired length.
Worktops with intermediate length are calculated from the closest size.
ACCESSORIES WORKTOPS
CleanLine
LENGTH DEPTH DEPTH DEPTH
600 mm 450 mm 600 mm 650 mm
900 mm 450 mm 600 mm 650 mm
1200 mm 450 mm 600 mm 650 mm
1800 mm 450 mm 600 mm 650 mm
2100 mm 450 mm 600 mm 650 mm
2400 mm 450 mm 600 mm 650 mm
2700 mm 450 mm 600 mm 650 mm
3000 mm 450 mm 600 mm 650 mm
RESISTANCE CHART FOR WORKTOPS
Organic solvents Acid / alkali Heat resistant Deformation Impact resistance Discolouration Surface smoothness Absorption
Laminate
Compact laminate
Polypropylene
Stainless steel 316/304 /
Epoxy Resin
Composite
Ceramic
Excellent Good Acceptable
SHELVES
Shelving is also available as wall-mounted systems. Please contact your local sales office or a sales rep, who will be happy to help you find the perfect solution for your particular needs.
ITEM NUMBER DEPTH
Worktop bracket - height 300 mm 7313030 300 mm
Worktop bracket height 300, lacquered 7313040 400 mm
7313055 550 mm
Supports, epoxy lacquered - height 500 mm 7313056 560 mm
7313076 760 mm
Supports ready for shelves, epoxy lacquered H 500 mm
7313090 560 mm
Installation bracket, epoxy lacquered 3x30x560 mm SAB 50
SHELVES FOR CABINETS WITH MODULAR SIDE PANELS DEPTH
Compact laminate panel 300x400x6 mm 2234400
Compact laminate panel 400x600x6 mm 2264400
Melamine panel, white 300x400x12 mm 2234403
Melamine panel, white 400x600x12 mm 2264403
Wor ktop with postformed front edge and rear upstand
10
Wall-mounted with space for electrical duct
Wall-mounted electronic patient journal (EPJ) table
• Scan Modul exclusively uses LINAK motors on ourheight adjustable tables.
Contact our sales or our offices if you would like more information about our range of adjustable height worktops.
Scan Modul offers both tables that are fitted close to the wall or fitted with space for installations, e.g. electrical ducts (as shown below).
•
Scan Modul offers a wide range of standard or customised height adjustable tables:
• Height adjustable tables increase the flexibility of theworkplace and guarantee an ergonomic working posture
Height adjustable tables
CleanLine
12
VARIOTILT CABINET SIDE PANELS
VARIOFLEX CABINET SIDE PANELS
TELESCOPIC RUNNERS
Injection moulded cabinet side
panel for horizontal inserts.
This cabinet side panel allows
the trays to be pulled out and
tilted to provide better access
to the contents.
Fitted with inbuilt stop function.
It can be fitted with removable
load relief wheels at the front
edge of the panel for safe and
easy pull-out of trays holding
heavy products.
The quality of the injection
moulding is more durable than
the traditional vacuum
moulded version. Max load 20
kg per insert.
Injection moulded cabinet side
panel for angled and horizontal
inserts.
This patented cabinet side
panel allows angled inserts,
providing a better view of the
products in the top trays.
Fitted with inbuilt stop
function. It can be fitted with
removable load relief wheels
at the front edge of the panel
for safe and easy pull-out of
trays holding heavy products.
Max load 20 kg per insert.
Stainless steel telescopic
runners fitted on perforated
rails.
The perforated rails can be
adjusted with 25 mm spacing.
This solution is recommended
for storing heavy products, and
where 110 % pull-out is
required. Normally fitted in
cabinets from the working
height down to the floor.
Our trays and baskets
can be placed directly
on the telescopic
runners without any
need for tools.
Max load 50 kg per insert.
Many of the cabinets in the product overview already include cabinet side panels or telescopic runners, but, if you wish to buy these separately, they are listed at the end of the product overview in this chapter.
CABINET FITTINGS
CleanLine
The cabinets can be fitted in various ways:
• VarioTilt or VarioFlex cabinet side panels provide flexiblestorage based on the ISO storage systems with 40x60 cm traysand baskets
• Telescopic runners, when you need drawers with easy access
• Regular shelves for basic storage needs
We also offer solutions based on a combination of these options.
12
350
650
457
Storage cabinet with A insert 4060
650
2100
935
650
100
30
805
650
2100
13
Storage cabinets with B insert 4060
350
480
450
450
657
2100
935
650
100
30
805
650
2100
14
PASS-THROUGH CABINETS
Height 2100 mm
Width: 457 mm
Depth: 670 mm
Height 2100 mm Width: 657 mm Depth: 470 mm
Pass-through cabinet type A - viewed from the top.
Pass-through cabinet type B - viewed from the top.
Cabinets
470
670 457
657
2100
2100
Cabinets
WALL REINFORCEMENT FOR INSTALLATION
15
Special cabinets
16
Special cabinets
17
FIRE RETARDANT CABINETS (BD30)/LEAD PROTECTED CABINETS Model 762 pass-through Model 732 not pass-through
CABINET DIMENSIONS For cabinets: H1864xW694xD525mm – without plinth H1864xW494xD725mm – without plinth H2038xW694xD525mm – with plinth, total height 2119mm H2038xW494xD725mm – with plinth, total height 2119mm
For pass-through cabinets: H1864xW694xD545mm – without plinth H1864xW494xD745mm – without plinth H2038xW694xD545mm – with plinth, total height 2119 mm H2038xW494xD745mm – with plinth, total height 2119 mm Fire retardant cabinets/pass-through cabinets are used in corridors between the corridor and rooms, for example, cleaning rooms, wards, operating theatres, medicine rooms etc.
APPROVAL According to the Fire Resistance Assessment - from the Danish Institute of Fire and Security Technology - 17.06.2004, the cabinets comply with the requirements in DS 1051.2 for a BD pass-through cabinet 30 (test report B 17640 b). The doors have Danish Standard certification license number 671E. The relevant assessment is available. It should be noted that the responsible local fire authority should always be contacted for final approval before commissioning.
TECHNICAL SPECIFICATION The cabinet/pass-through cabinet comprises a standard cabinet/pass-through cabinet, where one cabinet door is replaced by a single-leaf door - panel thickness 40 mm. On the outside of the door leaf, a 19 mm Cleanline cabinet door is affixed. The fire doors are fitted with a vertical door handle latch, which is activated by turning the handle.
If the cabinet is to be delivered without plinth, a moulding on the outer door and a steel moulding, which is milled in, and fastened to, the floor, are enclosed. The joints between pass-through cabinets and adjoining building elements are filled with stone wool, which is enclosed.
INSTALLATION Pay attention to the fact that the distance to the closest perpendicular wall, up to which the door will be opened, has to be at least 400 mm, allowing trays and baskets to be pulled out of the modular side panels. The 400 mm should be part of the building and not part of Scan Modul's delivery. There must be at least 2 layers of plasterboard or concrete, masonry or other fireproof material. If fitted by the customer, the enclosed regulations from Trehøjde Døre A/S must be followed, otherwise the installation requirements for fire protection will not be met.
Free height: 2139 mm (2119 =standard cabinet height + 10 mm)/1864 + 20 mm = 1884 mm
Free width: Cabinet dimensions + 10 mm on each side = +20 mm
Special cabinets
18
FIRE RETARDANT CABINETS (BD30)/LEAD PROTECTED CABINETS Model 762 pass-through Model 732 not pass-through
Technical sectional drawing
Special cabinets
19
FIRE RETARDANT CABINETS (BD30)/LEAD PROTECT CABINETS Model 762 pass-through Model 732 not pass-through
Introduction It is of great importance for the doors' fire and/or acoustic properties that it be fitted correctly. The person fitting the door is responsible for ensuring it is fitted as stipulated in this installation instruction. Before starting to fit the door, check that the frame dimensions and the size of the hole in the wall match, according to the requirements given below for the width of the joints between the frame and the adjoining building elements. If these size requirements are not met, the stipulated joint width must made, following agreement with the building management, in a way that does not degrade the door's fire and/or acoustic properties.
Securing the frame Place the assembled frame in the hole in the wall and wedge the frame into place horizontally and vertically at each corner (fig. 1). Fasten/wedge the frame to the adjoining building elements in at least 3 places on each side of the frame (fig. 1) and, for double-leaf doors, also at least one place (centre) of the frame's top section. Before final fixing, check that
• the frame is vertical and horizontal and
• that the frame is correctly placed in relation to the finished floor,
so the door leaf is free of the floor when opening to 90/180
degrees
Joint widths
After securing the frame in place and fitting the door leaf,
• the joints between the frame and the walls should have a width between 5 and 20 mm (fig. 2).
• the distance between the edge of the door leaf to the frame rebate on the side and top frame, as well as the centre joint for double-leaf doors, should not be greater than 3 mm (fig. 3).
• the distance from the bottom edge of the door leaf to the frame rebate in the bottom section (with stop) must not be greater than 6 mm (fig. 4).
If the frame is installed without a bottom section, the distance from the door leaf's bottom edge to non-flammable floor, or to a visible steel or brass rail in the flooring, must not exceed 6 mm (fig. 5). For an acoustic door, the seal against the stop has to be checked by seeing if there is any noticeable friction when a piece of paper is pulled through the stop (fig. 6).
Special cabinets
20
FIRE RETARDANT CABINETS (BD30)/LEAD PROTECTED CABINETS Model 762 pass-through Model 732 not pass-through
Filling The joints between frame and wall must be filled with mineral wool compressed to a density corresponding to 3 m of mineral wool strip, 60 mm x 20 mm, per running metre of 10 mm wide joint (fig. 7). Between the bottom section and the raw floor (the load bearing structure), the entire width and depth of the bottom section must be filled with mineral wool, as described for the joints between frame and wall. In addition, the joints enclosing an acoustic door 30 dB or above must be sealed effectively using an elastic sealant against the hottest/internal side of the door (fig. 8).
Door fittings The door has to be fitted with the stipulated fittings and fixings EI2 3-C, E 30-C, EI2 60-C with door closer (BD-30, F-30 and BD-60), and (for double-leaf doors) espagnolette and door selector, and any other fittings, after which it has to be checked.
• that the door leaf, and the lock's latch, can be moved freely.
• that the latch engages when the door closer closes the door
leaf from an opening greater than or equal to 300 mm.
• that the self-closing espagnolette (for double-leaf doors)
engages when the first closing door closes from an opening
as stated above, and that the door selector is working
correctly.
Locks that can prevent the doors from closing completely and the retaining fixings engaging (e.g. lock with bolt), may only be used for EI2, (BD doors) following prior agreement of the authorities. For a EI2, (BD-30M) door, the door is not required to be self-closing. Alternatively, fittings (except for escutcheons, keyhole plates, kick plates, sealing strips and door closers) shall have a melting point of at least 850 degrees C.
Other regulations
Milling, cutting or other machining of the door leaf and frame is not permitted. It is not permitted to fit letter boxes and spy holes. Flammable flooring, e.g. carpet, must not be inserted under the door leaf nor under the steel or brass rail, which possibly replace the bottom section. The DS markings must not be painted over. Fire sealant can be painted over, but not levelled out.
21
A
A ( 1 : 4 )
Fire resistant cabinet, pass-through Type A - Incl. plinth
457
494
19
745
2038
650
2100
2000
75
100
81
2119
22
A
A ( 1 : 4 )
Fire resistant cabinet, pass-through Type B - Incl. plinth
657
694
19
545
2038
450
75
2100
2000
100
81
2119
25
Tall cabinet with standard door Width Depth Pull-out Hinges
Instrument cabinets with standard door, 1 to 3 pull-outs with perforated panel for instrument hooks. Height 2100 mm, with plinth
457 650 1 Right / Left
457 650 2 Right / Left
657 450 2 Right / Left
Tall cabinet with glass door
Instrument cabinets with glass door, 1 to 3 pull-outs with perforated panel for instrument hooks. Height 2100 mm, with plinth
Tall over cabinet with standard door
Instrument cabinets with standard door, 1 to 3 pull-outs with perforated panel for instrument hook Height 1200 mm.
Tall over cabinet with glass door
Instrument cabinet with glass door, 1 to 3 pull-outs with perforated panel for instrument hooks.
Height 1200 mm.
PULL-OUT PANELS Melamine panel with mounted perforated panel in white lacquered steel, 110% telescopic pull-out.
INSTRUMENT HOOKS Stainless steel instrument hooks, alternatively, Rilsan coated steel. Metal colour / grey.
COLOURS For choice of laminate colours for fronts,
INSTRUMENT
CABINETS
Instrument cabinets
457 650 1 Right / Left
457 650 2 Right / Left
657 450 2 Right / Left
457 650 1 Right / Left
457 650 2 Right / Left
657 450 2 Right / Left
457 650 1 Right / Left
457 650 2 Right / Left
657 450 2 Right / Left
24
INSTALLATION OF MEDICINE CABINETS
The Scan Modul medicine cabinet is an excellent alternative, when an institution / clinic does not have a dedicated and locked medicine room. The medicine cabinet is available with and without a drug box. It can also be combined with the refrigerator Porkka MC70, as shown in the example in the picture.
25
Product Overview
TALL CABINETS - H 2100 MM, INCL. 100 MM PLINTH
WIDTH
DEPTH
Tall cabinet, 1 door, incl. VarioTilt™ and
100 mm plinth
(Also available with glass door)
357 mm
457 mm
657 mm
450 mm
650 mm
450 mm
Tall cabinet, double door, incl. VarioTilt™
and 100 mm plinth
(Also available with glass door)
657 mm
450 mm
Tall cabinet, no door, incl. VarioTilt™ and
100 mm plinth
357 mm
457 mm
657 mm
450 mm
650 mm
450 mm
Tall cabinet, 1 door, incl. 4 shelves
and 100 mm plinth
(Also available with glass door)
457 mm
657 mm
457 mm
657 mm
650 mm
450 mm
450 mm
650 mm
Tall cabinet, double door, incl. 4 shelves
and 100 mm plinth
(Also available with glass door)
914 mm
914 mm
450 mm
650 mm
Tall cabinet, no door, incl. 4 shelves
and 100 mm plinth
457 mm
657 mm
630 mm
430 mm
Parking cabinet, double door, incl. 3
shelves at the top and U plinth
914 mm
914 mm
450 mm
650 mm
Wardrobe, 1 door, incl.
hanging rail and 1 shelf
and 100 mm plinth
457 mm
657 mm
650 mm
450 mm
TALL CABINETS - H 2100 MM, INCL. 100 MM PLINTH
WIDTH
DEPTH
Wardrobe, 1 door
incl. hanging rail and 1 shelf and
100 mm plinth
657 mm
450 mm
Scope cabinet, 1 door
incl. 1 pull-out panel (B 457)
incl. 2 pull-out panels (B 657)
(exc. hangers for scopes) incl.
100 mm plinth
457 mm
657 mm
657 mm
650 mm
450 mm
650 mm
Tall cabinet with roller front
incl. VarioTilt™ and 100 mm plinth
457 mm
657 mm
680 mm
480 mm
Tall cabinet, no door, modular
sides for fitting other cabinet side
panels incl. 100 mm plinth
457 mm
657 mm
630 mm
430 mm
Tall cabinet, 1 door, modular sides
for fitting other cabinet side
panels incl. 100 mm plinth
(Also available with glass door)
457 mm
657 mm
650 mm
450 mm
Fire retardant cabinet, 1 door,
incl. VarioTilt™
BD30 on door, incl. frame
(H 2038 mm - item no. is excl. plinth)
494 mm
694 mm
725 mm
525 mm
Bedpan/storage cabinet, clean, 1
door incl. VarioTilt™
with Telco oven
657 mm
450 mm
Bedpan/storage cabinet, unclean, 1
door incl. VarioTilt™
with 100 mm studs for oven
with air gap in the bottom
657 mm
450 mm
26
Product Overview
TALL CABINETS - H 2100 MM
WIDTH
DEPTH
Medicine cabinet with pull-out
front 10 (W257) or 20 (W357)
medicine trays
(Exc. partitions for trays)
257 mm
357 mm
650 mm
650 mm
TALL CABINETS - H 1826 MM FOR WALL MOUNTING
WIDTH
DEPTH
Tall cabinet, 1 door, incl.
VarioTilt™ (Also available with
glass door)
457 mm
657 mm
650 mm
450 mm
Tall cabinet, 1 door, incl. 4
shelves (Also available with
glass door)
457 mm
657 mm
650 mm
450 mm
Tall cabinet, no door, incl. VarioTilt™
457 mm
657 mm
630 mm
430 mm
Tall cabinet, 1 door, modular sides for
fitting other cabinet side panels (Also
available with glass door)
457 mm
657 mm
650 mm
450 mm
Fire retardant cabinet, 1 door,
incl. VarioTilt™
BD30 on door, incl. BD30
frame(H 1864 mm)
494 mm
694 mm
725 mm
525 mm
Bedpan/storage cabinet, clean, 1
door with Telco oven, incl.
VarioTilt™
657 mm
450 mm
Bedpan/storage cabinet, unclean, 1
door with 100 mm studs for oven
with air gap in the
bottom, incl. VarioTilt™
657 mm
450 mm
Wardrobe, 1 door, incl.
hanging rail and 1 shelf
657 mm
650 mm
TALL CABINETS - H 2100 MM PASS-THROUGH
WIDTH
DEPTH
Pass-through cabinet, incl. VarioTilt™ and
100 mm plinth
(Also available with glass doors)
457 mm
657 mm
670 mm
470 mm
Fire retardant pass-through cabinet
BD30 on 1 door
Incl. BD30 frame
Incl. VarioTilt™
(H 2038 mm - item no. is excl. plinth)
494 mm
694 mm
745 mm
545 mm
Fire retardant pass-through cabinet with
2 mm lead lining
BD30 and lead lining on 1
door incl. BD30 frame
incl. VarioTilt™
(H 2038 mm - item no. is excl. plinth)
494 mm
694 mm
745 mm
545 mm
27
Product Overview
TALL CABINETS - H 1826 MM, BUILT IN
WIDTH
DEPTH
Tall pass-through cabinet,
incl. VarioTilt™
(Also available with glass doors)
457 mm
657 mm
670 mm
470 mm
Fire retardant pass-through cabinet,
BD30 on door, incl. BD30 frame
incl. VarioTilt™
(H 1864 mm)
494 mm
694 mm
745 mm
545 mm
Fire retardant cabinet with 2 mm
lead lining, Bd30/lead lining on 1
door, incl. BD30 frame
incl. VarioTilt™
(H 1864 mm)
494 mm
694 mm
745 mm
545 mm
TALL OVER CABINETS - H 1195 MM
WIDTH
DEPTH
Medicine cabinet, 1 door
incl. 5 indented shelves, 1
straight shelf, 1 pull-out shelf,
medicine rack, light
657 mm
450 mm
Medicine cabinet, 1 door
incl. 3 indented shelves, poison
box with lock, 1 straight shelf, 1
pull-out shelf, medicine rack,
light
657 mm
450 mm
Bag cabinet/personal locker with 3
or 6 doors
(Also available with mailbox)
332 mm
657 mm
450 mm
450 mm
Instrument cabinet, 1 door
incl. 1 pull-out with perforated panel
(W457) incl. 2 pull-outs with
perforated panels (W657)
457 mm
657 mm
650 mm
450 mm
TALL OVER CABINETS - H 1195 MM
WIDTH
DEPTH
Tall over cabinet, no
door, incl. VarioTilt™
357 mm
657 mm
457 mm
430 mm
430 mm
630 mm
Tall over cabinet, 1
door, incl.
VarioTilt™
(Also available with glass door)
357 mm
457 mm
657 mm
450 mm
650 mm
450 mm
Tall over cabinet, 1
door, 3 shelves
(Also available with glass door)
457 mm
657 mm
650 mm
450 mm
Tall over cabinet with roller
front, incl. VarioTilt™
457 mm
657 mm
680 mm
480 mm
WALL CABINETS - H 650 MM
WIDTH
DEPTH
Wall cabinet, 1 door, incl.
VarioTilt™ (Also available with
glass door)
457 mm
357 mm
657 mm
457 mm
350 mm
450 mm
450 mm
650 mm
Wall cabinet, 1 door, incl. 1
shelf (Also available with
glass door)
457 mm
457 mm
657 mm
657 mm
350 mm
450 mm
350 mm
450 mm
Wall cabinet, double door, incl. 1
shelf (Also available with glass door)
914 mm
914 mm
350 mm
450 mm
28
Cabinets
Product Overview
WALL CABINETS - H 650 MM
WIDTH
DEPTH
Wall cabinet, no door, incl. VarioTilt™
457 mm
657 mm
330 mm
430 mm
Wall cabinet, no door, incl. 1 shelf
457 mm
657 mm
657 mm
330 mm
330 mm
430 mm
Wall cabinet with sliding
glass doors and 1 shelf
(Not available with lock)
1,200 mm
350 mm
Wall cabinet with roller
front incl. VarioTilt™
657 mm
480 mm
UNDER CABINETS - H 905 MM, INCL. 100 MM PLINTH
WIDTH
DEPTH
Undercabinet, 1
door, incl.
VarioTilt™
incl. 100 mm plinth
357 mm
457 mm
657 mm
450 mm
650 mm
450 mm
Undercabinet, 1 door
incl. 1 shelf
incl. 100 mm plinth
457 mm
657 mm
657 mm
650 mm
450 mm
650 mm
Undercabinet, double
door, incl. 1 shelf
incl. 100 mm plinth
914 mm
914 mm
1,314 mm
450 mm
650 mm
650 mm
Under cabinet with roller
front incl. VarioTilt™
incl. 100 mm plinth
457 mm
657 mm
680 mm
480 mm
Undercabinet, no
door, incl. VarioTilt™
incl. 100 mm plinth
357 mm
457 mm
657 mm
430 mm
630 mm
430 mm
Undercabinet, no
door, incl. 1 shelf
incl. 100 mm plinth
457 mm
657 mm
630 mm
430 mm
Bag cabinet/personal locker with 2
or 4 doors
incl. 100 mm plinth
(Also available with mailbox)
332 mm
657 mm
450 mm
450 mm
Housing unit for
fridge incl. 100 mm
plinth
657 mm
657 mm
450 mm
650 mm
OVER CABINETS - H 581 MM
WIDTH
DEPTH
Wall cabinet, 1 door
(For fitting above tall cabinet)
457 mm
657 mm
650 mm
450 mm
Wall cabinet, double door
(For fitting above tall cabinet)
914 mm
450 mm
29
Product Overview
UNDER CABINETS - H 905 MM, INCL. 100 MM PLINTH
WIDTH
DEPTH
Drawer cabinet, 2 + 1 std.
drawers incl. 100 mm plinth
(Full pull-out)
457 mm
657 mm
657 mm
650 mm
450 mm
650 mm
Drawer cabinet, 3 + 1 std.
drawers incl. 100 mm plinth
(Full pull-out)
457 mm
457 mm
657 mm
657 mm
450 mm
650 mm
450 mm
650 mm
Drawer cabinet, 5 std.
drawers incl. 100 mm
plinth
(Full pull-out)
457 mm
657 mm
650 mm
650 mm
Drawer cabinet, 5 drawers For
catheters incl. fixed top panel H
126 mm incl. 5 partitions per
drawer
incl. 100 mm plinth
1,314 mm
1,314 mm
1,371 mm
1,571 mm
450 mm
650 mm
650 mm
650 mm
Drawer cabinet, 3 pull-out
frames for modules (3 x 200
mm) incl. 100 mm plinth
457 mm
657 mm
650 mm
450 mm
Drawer cabinet, 3 + 1 pull-out frames
for modules (3 x 200 mm and 1 x 200)
incl. 100 mm plinth
457 mm
657 mm
650 mm
450 mm
Drawer cabinet, 5 pull-out
frames for modules (5 x 100
mm) incl. 100 mm plinth
457 mm
657 mm
650 mm
450 mm
UNDERCABINETS - H 905 MM, INCL. 100 MM PLINTH
WIDTH
DEPTH
Sink cabinet, 1
door, incl. 100 mm
plinth
457 mm
657 mm
657 mm
650 mm
450 mm
650 mm
Sink cabinet, double door,
incl. 100 mm plinth
914 mm
914 mm
450 mm
650 mm
UNDERCABINETS FOR HANGING H 581 MM
WIDTH
DEPTH
Undercabinet, 1 door, incl. VarioTilt™
457 mm
650 mm
Drawer cabinet, 4 pull-out frames
for modules (4 x 100 mm)
657 mm
457 mm
450 mm
650 mm
30
Cabinets
Product Overview
UNDERCABINETS FOR HANGING H 389 MM
WIDTH
DEPTH
Drawer cabinet, 1 + 2 pull-out frames for
modules (2 x 50 and 1 x 100 mm)
657 mm
457 mm
450 mm
650 mm
CABINET SIDE PANELS WITH BRACKETS - TALL CABINET PARTS
WIDTH
DEPTH
VarioFlex (angled/straight
insert) Number of inserts:
23
Distance between inserts: 75 mm
(3") Type A
400 mm
600 mm
VarioFlex (angled/straight
insert) Number of inserts:
23
Distance between inserts: 75 mm
(3") Type B
600 mm
400 mm
VarioTilt (straight
insert) Number of
inserts: 50
Distance between inserts: 37.5 mm
(1½") Type A
400 mm
600 mm
VarioTilt (straight
insert) Number of
inserts: 50
Distance between inserts: 37.5 mm
(1½") Type B
600 mm
400 mm
VarioFlex (angled/straight insert) - Perforated rail
1. Number of inserts: 11
Distance between inserts: 75 mm (3")
2. Hole separation: 25
mm (1") Type A
400 mm
600 mm
VarioFlex (angled/straight insert) - Perforated rail
1. Number of inserts: 11
Distance between inserts: 75 mm (3")
2. Hole separation: 25
mm (1") Type B
600 mm
400 mm
VarioTilt (straight insert) - Perforated rail
1. Number of inserts: 27
Distance between inserts: 37.5 mm (1½")
2. Hole separation: 25
mm (1") Type A
400 mm
600 mm
Cabinet side panel (straight insert) - Perforated rail
1. Number of inserts: 27
Distance between inserts: 37.5 mm (1½")
2. Hole separation: 25
mm (1") Type B
600 mm
400 mm
VarioTilt (straight insert)
for pass-through cabinets
Number of inserts: 50
Distance between inserts: 37.5mm
(1½") Type A
400 mm
600 mm
VarioTilt (straight insert)
for pass-through cabinets
Number of inserts: 50
Distance between inserts: 37.5mm
(1½") Type B
600 mm
400 mm
Cabinet side panels with brackets
(straight insert) Number of inserts: 44
Distance between inserts: 40 mm Type A
400 mm
600 mm
Cabinet side panels with brackets
(straight insert) Number of inserts: 44
Distance between inserts: 40 mm Type B
600 mm
400 mm
DRAWER - FOR HANGING H 171 MM
WIDTH
DEPTH
Drawer unit, 1 pull-out frame for
1 x 100 mm modules
657 mm
457 mm
450 mm
650 mm
DRAWER - FOR HANGING H 140 MM
WIDTH
DEPTH
Drawer unit, 1 pull-out frame for
1 x 50 mm modules
657 mm
457 mm
450 mm
650 mm
Product Overview
SHELVES
WIDTH
DEPTH
Melamine shelves (12 mm)
for use together with
VarioTilt cabinet side panels
400 mm
300 mm
600 mm
400 mm
Cabinets without cabinet side panels with brackets are available with a
number of shelves included – these are 19 mm or 22 mm thick,
depending on the width of the cabinet. Contact your local sales rep, if
you have use for additional shelves for these types of cabinets.
31
CABINET SIDE PANELS WITH BRACKETS - UNDERCABINET PARTS
WIDTH
DEPTH
VarioFlex (angled/straight insert)
Number of inserts: 8
Distance between inserts: 75
mm Type A
400 mm
600 mm
VarioFlex (angled/straight insert)
Number of inserts: 8
Distance between inserts: 75
mm Type B
600 mm
400 mm
VarioTilt (straight
insert) Number of
inserts: 20
Distance between inserts: 37.5 mm
(1½") Type A
400 mm
600 mm
VarioTilt (straight
insert) Number of
inserts: 20
Distance between inserts: 37.5 mm
(1½") Type B
600 mm
400 mm
Perforated rail for telescopic
runner Hole separation: 25
mm (1") Type A
400 mm
600 mm
Perforated rail for telescopic
runner Hole separation: 25
mm (1") Type B
600 mm
400 mm
TELESCOPIC RUNNERS AND PERFORATED RAILS
WIDTH
DEPTH
Perforated rail for telescopic
runner Hole separation: 25
mm (1") Type A
400 mm
600 mm
Perforated rail for telescopic
runner Hole separation: 25
mm (1") Type B
600 mm
400 mm
Perforated rail for tall cabinet
Height 1900 mm
Perforated rail for tall cabinet
Height 1,550 mm
Perforated rail for tall cabinet
Height 900 mm
Perforated rail for tall cabinet
Height 650 mm
Telescopic runners, 1
set in stainless steel
for fitting on perforated
rail Type A
600 mm
Telescopic runners, 1
set in stainless steel
for fitting on perforated
rail Type B
400 mm
Telescopic runners
for pass-through cabinets, 1
set in stainless steel,
for fitting on perforated
rail Type A
600 mm
CABINET SIDE PANELS WITH BRACKETS - TALL CABINET PARTS
WIDTH
DEPTH
VarioFlex (angled/straight insert)
Number of inserts: 11
Distance between inserts: 75 mm
(3") Type A
400 mm
600 mm
VarioFlex (angled/straight insert)
Number of inserts: 11
Distance between inserts: 75 mm
(3") Type B
600 mm
400 mm
VarioTilt (straight insert)
Number of inserts: 30
Distance between inserts: 37.5 mm
(1½") Type A
400 mm
600 mm
VarioTilt (straight insert)
Number of inserts: 30
Distance between inserts: 37.5 mm
(1½") Type B
600 mm
400 mm
VarioTilt (straight insert)
Number of inserts: 15
Distance between inserts: 37.5 mm
(1½") Type D
300 mm
400 mm
VarioFlex (angled/straight
insert) Number of inserts: 5
Distance between inserts: 75mm
(3") Type B
600 mm
400 mm
VarioTilt (straight insert)
Number of inserts: 15
Distance between inserts: 37.5 mm
(1½") Type B
600 mm
400 mm
DENMARK:
[email protected] +45 48 22 88 66 +45 97 52 35 33
NORWAY: [email protected] +47 22 20 78 00 +47 22 20 78 01
SWEDEN: [email protected] +46 8 702 99 10
SWITZERLAND: [email protected] +41 61 3 016 301
NETHERLANDS: [email protected] +31 30 6 345 345 +31 30 6 345 300
GERMANY: [email protected] +49 74 6 196 740
SPAIN: [email protected] +34 934 797 465
FRANCE: [email protected] +33 4 74 99 03 30 +33 4 74 99 03 33
OTHER COUNTRIES: [email protected]
Designed with care for people who care