Modules

Trays

and b

oxe

s

• Injection molded ABS trays and inserts.

• Stackable.

• Pre-perforated on edge for mounting safety stops.

• Beaded edge on trays for label holders.

• Inserts and partitions for compartmentilizing.

• Machine washable for short periods of time

at maximum of 90˚C (194°F).

• High-Density storage for large and small items.

• Modular Inserts for storage and transportation of

small items.

“

”

111

300 + 300

400

ABS

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

PC

ABS

ABS

ABS

20-34201Tray / Lid 300 x 400 x 15mm

11¾ x 15¾ x 5/8”

20-34204Tray / Lid

300 x 400 x 70mm

11¾ x 15¾ x 2¾”

20-34304Tray / Lid

300 x 400 x 70mm

11¾ x 15¾ x 2¾”

20-34206Tray for use with partitions

300 x 400 x 50mm

11¾ x 15¾ x 2”

Partitions 300mm (11¾”) max. 15 pcs. (20-64269)

Partitions 400mm (11¾”) max. 11 pcs. (20-64270)

20-34205Tray 300 x 400 x 50mm

11¾ x 15¾ x 2”

Tray lids and trays

2

1

5

4

3

2

1

5

4

3

11¾ + 11¾

15¾

11¾ + 11¾

11¾ + 11¾

15¾

11¾ + 11¾

11¾ + 11¾

15¾15¾

15¾

112

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

PMMA

PMMA

PA

ABS

ABS

Trays, boxes and partitions

20-34207Tray for use with partitions

300 x 400 x 50mm

11¾” x 15¾” x 2”

Partitions 300mm (11¾”) max. 15 pcs. (20-64269)

Partitions 400mm (15¾”) max. 11 pcs. (20-64270)

20-64269Partition 300 x 50mm 11¾ x 2”

20-64270Partition 400 x 50mm 15¾ x 2”

20-64266T-piece for partition

20-34220Box 300 x 400 x 200mm

11¾ x 15¾ x 20”

20-34210Tray 300 x 400 x 100mm

11¾ x 15¾ x 10”

2

1

5

4

3

2

1

5

4

3

2

11¾ + 11¾

15¾

11 ¾+ 11 ¾

15¾15¾

11¾ + 11¾

11¾ + 11¾

15¾15¾

11¾ + 11¾

113

600

400

600

400

600

400

600

400

600

400

ABS

ABS

ABS

ABS

ABS

Tray lids, trays and boxes

20-64201Lid tray 600 x 400 x 15mm

235/8 x 15¾ x 5/8”

20-64205Tray 600 x 400 x 50mm

235/8 x 15¾ x 2”

20-64210Tray 600 x 400 x 100mm

235/8 x 15¾ x 4”

20-64228Box 600 x 400 x 280mm

235/8 x 15¾ x 11”

20-64220Box 600 x 400 x 200mm

235/8 x 15¾ x 8”

3

4

5

1

2

3

4

5

1

2

235/8

15¾

235/8

15¾

235/8

15¾15¾

235/8

15¾

23 5/8

114

600

400

600

400

ABS

600

400

PMMA

300 + 300

400

PMMA/ABS

600

400

ABS

Trays and partitions

20-64206Trays for use with partitions

600 x 400 x 50mm

235/8 x 15¾ x 2”

Partitions 400mm (15¾”) max. 25 pcs. (20-64270)

Partitions 600mm (235/8”) max. 15 pcs. (20-64271)

20-64207Tray for use with partitions

600 x 400 x 50mm

23 5/8 x 15¾ x 2”

Partitions 400mm (15¾”) max. 25 pcs. (20-64270)

Partitions 600mm (235/8”) max. 15 pcs. (20-64271)

20-64272Partitions 200 x 50mm (77/8 x 2”)

20-64270Partitions 400 x 50mm (15¾ x 2”)

20-64271Partitions 600 x 50mm (235/8 x 2”)

20-64266T-pieces for partitions

20-34206

20-34207

INSERTS

Inserts can be used as an

alternative to partitions or

independently without trays.

Trays for partitions300 x 400mm (11¾ x 15¾”)

See page 111 and 112

3

4

5

1

2

4

3

5

1

3

3

3

2

235/8

15¾

235/8

15¾15¾

15¾

235/8

11 ¾+11 ¾

235/8

15¾

115

600

400

600

400

600

400

ABS

PMMA

PMMA

300 + 300

400

300 + 300

400

PA

ABS

Trays and partitions

20-64211Tray for use with partitions

600 x 400 x 100mm

(235/8 x 15¾ x 4”)

Partitions 400mm (15¾”) max. 17 pcs.

Partitions 600mm (235/8”) max. 11 pcs.

23-64353Partition 400 x 100mm (15¾ x 4”)

23-64354Partition 600 x 100mm (235/8 x 4”)

20-64212Tray for use with partitions

600 x 400 x 100mm

(235/8 x 15¾ x 4”)

Partitions 400mm (15¾”) max. 17 pcs.

Partitions 600mm (235/8”) max. 11 pcs.

20-64266The T-piece secures the

smaller ”snapped off” sections

of the partitions.

All partitions have a “snap”

feature between the ribs, for defined

division of the modules.

3

4

5

1

2

3

5

4

2

1

3

235/8

15¾

235/8

15¾

235/8

15¾15¾

11 ¾ +11 ¾

11 ¾ +11 ¾

15¾

Bask

ets

• Injection molded ABS baskets.

• Stackable.

• Pre-perforated for safety stops.

• Beaded edges on baskets for label holders.

• Partitions for compartmentalization.

• Washable at max. 90˚C(194°F) for short periods

of time.

• Strong and durable construction.

“

”

117

300 + 300

400

300 + 300

400

600

400

600

400

300 + 300

400

ABS

ABS

ABS

ABS

PA

Baskets and partitions

23-34251Basket 300 x 400 x 100mm

(11¾ x 15¾ x 4”)

Partitions 300mm (11¾”) max. 11 pcs. (23-64257)

Partitions 400mm (15¾”) max. 7 pcs. (23-64253)

23-64251Basket 600 x 400 x 100mm

(235/8 x 15¾ x 4“)

Partitions 400mm (15¾”) max. 17 pcs. (23-64253)

Partitions 600mm (235/8 “) max. 11 pcs. (23-64254)

23-34252Basket 300 x 400 x 200mm

(11¾ x 15¾ x 77/8”)

Partitions 400mm (15¾”) max. 7 pcs. (23-64255)

The labeling system has been designed to ensure

accurate product identification.

The product labels can be

placed on all of the modules,

anywhere in the supply chain

process.

23-64252Basket 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)

Partitions 400mm (15¾”) max. 17 pcs. (23-64255)

Partitions 600mm (235/8”) max. 11 pcs. (23-64256)

3

4

5

1

2

3

5

4

2

1

11 ¾ +11 ¾

15¾15¾

11 ¾ +11 ¾

235/8

15¾15¾

15¾

11 ¾+11 ¾

235/8

118

600

400

600

400

300 + 300

400

300 + 300

400

300 + 300

400

ABS

ABS

PA

ABS

ABS

Partitions for baskets

23-64253Partitions 400 x 100mm (15¾ x 4”)

23-64254Partitions 600 x 100mm ( 235/8 x 4”)

23-64255Partitions 400 x 200mm (15¾ x 8”)

23-64256Partitions 600 x 200mm (235/8 x 8”)

20-64266T-piece for partitions

23-64259Partition lock

23-34260Basket Liner

300 x 400mm (11¾ x 15¾”)

23-64260Basket Liner for basket 600x400x100mm

600 x 400mm (235/8 x 15¾”)

23-64261Basket Liner for basket 600x400x200mm

600 x 400mm (235/8 x 15¾”)

2

1

2

1

5

4

3

2

1

5

4

3

5

235/8

15¾15¾

15¾15¾

235/8

11 ¾+ 11 ¾

11¾ + 11¾

11 ¾+ 11 ¾

15¾

5

Modula

r inse

rts

• Injection molded ABS trays and inserts.

• Stackable.

• Inserts for compartmentalization.

• Washable at max. 90°C (194°F)for short periods

of time.

• High density storage for large and small items.

• Inserts are ideal for storage and transport of

small items.

“

”

120

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

PA

RIL

ABS

ABS

ABS

EP

ABS

ABS

35/77

15/28

12

6

14

6

12

6

6

3

Modular inserts and partitions

Individual

modular inserts

arranged in a tray

21-62205Partition

70mm (2¾”) for 21-62206

21-62204Inserts

100x50x45mm

(4x2x1¾”) 21-62202Inserts

50x50x45mm

(2x2x1¾”)

21-62220Inserts

240x55x50mm

(9½x21/8 x2”)

28-62751550mm (215/8”)

gray

28-62753650mm (235/8”)

gray

21-62206Inserts

170x75x50mm

(6¾x3x2”)

21-62212Inserts

240x110x50mm

(9½x4¾x2”)

21-62210Inserts

120x110x50mm

(4¾x4¾x2”)

28-62752550mm (215/8”)

blue

28-62754650mm (235/8”)

blue

Suspension rails for insert

21-62206

Suspension rails for inserts

21-62206

3

4

5

1

2

4

5

3

3

2

1

2

4

5

4

3

3

11 ¾+ 11 ¾

15¾

15¾

11 ¾+ 11 ¾

11 ¾+ 11 ¾

11¾ + 11¾

11¾ + 11¾

11 ¾+ 11 ¾

11 ¾+ 11 ¾

11 ¾+ 11 ¾

15¾

15¾

121

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

ABS

ABS

ABS

PA

ABS

ABS

ABS

12

6

9

4

9

4

6

3

4

2

4

2

ABS

PC

Modular inserts and partitions

21-62222Inserts

240x55x100mm

(9½x21/8x37/8”)

21-62230Inserts

340x55x100mm

(133/8 x21/8 x37/8”)

21-62207Partition

W110mm

H 50mm

(H 2” W 4¾”)

21-62218Inserts

240x110x100mm

(9½x43/8 x37/8”)

21-62226Inserts

340x110x100mm

(133/8 x4¾x37/8”)

21-62224Inserts

340x110x50mm

(133/8x4¾x2”)

21-62216Lid for insert,

gray

240x120mm

(9½x4¾”)

21-62228Inserts

340x55x50mm

(133/8 x21/8x2”)

21-62215Transparent insert lid

240x120mm

(9½x4¾”) 21-62215FTransparent insert lid

240x120mm

(9½x4¾”)

Cut out 150x40mm

(57/8 x 1 5/8”)

Lids for inserts

21-62212

21-62218

3

5

4

3

2

1

4

5

1

1

2

1

2

1

4

3

11¾ + 11¾

11¾ + 11¾

15¾

11¾ + 11¾

11¾ + 11¾

15¾

11¾ + 11¾

15¾

15¾15¾

15¾15¾

11¾ + 11¾

11 ¾+ 11 ¾

122

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

ABS

ABS

ABS

ABS

PC

PC

PC

PC

ABS

3

0

6

0

12

6

4

2

6

3

4

2

Modular inserts (autoclavable)

21-62240Inserts

550x55x70mm

(215/8 x21/8 x2 ¾”)

21-62209Inserts

120x110x50mm

(4¾x4¾x2 “)

21-62225Inserts

340x110x50mm

(133/8x4¾x2 “)

18-67372Catheter holder with hook for

accessary rail

550x110x50mm (215/8 x4¾x2”)

10x25mm (3/8”x1”) 41-30040for Scancell

21-62244Inserts

850x110x50mm

(33½x4¾x2”)

18-67373Catheter holder with hook for

accessory rail

850x110x50mm

(33½x4¾x2”)10x25mm(3/8”x1”)

41-30042for Scancell

21-62242Inserts

550x110x50mm

(215/8 x4¾x2”)

Autoclava

ble

Autoclava

ble

Autoclava

ble

Autoclava

ble

3

4

5

1

2

5

4

3

3

1

21-62227Inserts

340x110x100mm

133/8x4¾x4 “

5

21-62214Inserts

240x110x50mm

(9½x4¾x2“)

4

3

3

2

1

11¾ + 11¾

11 ¾+ 11 ¾

11¾ + 11¾

11¾ + 11¾ 11¾ + 11¾

11¾ + 11¾

15¾

15¾

15¾15¾

15¾15¾

Medic

ine d

istributio

n

• Module for storage and transportation of medicine.

• Medicine dispensers.

• Transport boxes.

• Different label systems.

• UNI-boxes.

• Modular inserts with compartments.

“

”

124

300 + 300

400

300 + 300

400

600

400

600

400

300 + 300

400

ABS

ABS

RIL/EP

ABS

ABS

Inserts for medicine

28-62760UNI-box with handle

340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 28-62762Partitions, crosswise 80mm (31/8”)

28-62758UNI-box with handle

340 x120 x 70mm (133/8 x 4¾ x 2¾”) 28-62759Partitions, crosswise120mm (2¾”)

28-62760LUni-box with lid

340 x 80 x 70mm (133/8 x 31/8 x 2¾”) 28-62758LUni-box with lid

340 x 120 x 70mm (133/8 x 4¾ x 2¾”)

28-62763Rail for suspension of UNI-boxes

600mm (235/8”) long, gray

28-62763B600mm (235/8”) long, blue

28-62724Tray 600 x 400 x 50mm

(235/8 x 15¾ x 2”)

6 pcs. UNI-box 340 x 80 x 70mm

(133/8 x 31/8 x 2¾)

Credit-card size label slots

Stands are available in different

versions. Can be inserted either in ´A´

400mm (15¾”) or ´B´ 600mm (235/8”)

position.

The stand shown at the right

(prod. no. 41-80033) is in a “B” (235/8”)

(600mm) insertion. 18 cassettes are

inserted in the stand

3

4

5

1

2

3

5

4

1

3

2

1

1

1

2

15¾

11¾ + 11¾

11¾ + 11¾

15¾15¾

235/8

235/8

15¾15¾

11¾ + 11¾

125

300 + 300

400

600

400

600

400

600

400

600

400

ABS

ABS

ABS/PMMA

ABS/PMMA

ABS/PMMA

Inserts for medicine

28-62704Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)

with slots for cards + transparent insert

with 8 compartments.

Each compartment has 4 recessed holes

for medicine cups

28-62700Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)

with slots for cards + transparent insert

with 15 compartments

28-62730

28-62722Tray 600 x 400 x 50mm

(235/8 x 15¾ x 2”)

with sections for modular inserts:

170 x 75 x 50mm (6¾ x 3 x 2”)

(21-62206)

(2 X 7 pcs. = 14 inserts per tray)

28-62720Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)

with sections for 4 modular inserts:

340 x 120 x 50mm (133/8 x 4¾ x 2” )

(21-62224)

340 x 120 x 100mm (133/8 x 4¾ x 4”) (21-62226)

Slot for Insertion of credit-card size labels

28-62734Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)

with inserts for cards + transparent insert

with 20 compartments.

Each compartment has 4

recessed holes for medicine cups

Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)

with slots for cards + transparent insert

with 35 compartments

2

1

1

5

4

3

2

1

5

4

3

11¾ + 11¾

15¾15¾

15¾15¾

15¾

235/8

23 5/8

235/8

235/8

126

300 + 300

400

600

400

300 + 300

400

300 + 300

400

300 + 300

400

ABS

ABS

PC

ABS/PC/PPO

PS

6

3

Inserts for medicine etc.

28-62739Tray 300 x 400 x 50mm (11¾ x 15¾ x 2”)

with inserts for 12 medicine dispensers

28-62737Tray 600 x 400 x 50mm (235/8 x 15¾ x 2”)

with insert for 2 x 12 = 24 medicine

dispensers

28-62741EMedicine dispensers,

4 compartments with

transparent sliding lid

21-64102Test Tube Holder for 50 pcs.

13mm (1/2”) holes

21-64104Test Tube Holder for 32 pcs.

18mm (3/4” ) holes

21-64106Test Tube Holder for 18 pcs.

25mm (1”) holes

21-62215F Lid, transparent -PC

240 x 120mm (9½ x 14¾”)

Opening 150 x 40mm (57/8 x 15/8”)

21-62213 Inserts, yellow -ABS

240 x 120 x 50mm (9½ x 14¾ x 2”)

20-34303 Lid tray, yellow -PPO

300 x 400 x 15mm (11¾ x 15¾ x 5/8”)

2 Openings 155 x 45mm (61/8 x 1¾”) 20-34311 Tray, yellow -PPO

300 x 400 x 100mm (11¾ x 15¾ x 37/8”)

3

4

5

1

2

3

5

4

5

5

5

4

4

2

1

11¾ + 11¾

15¾15¾

15¾

11¾ + 11¾

235/8

11¾ + 11¾

15¾

11¾ + 11¾

15¾

127

300 + 300

400

300 + 300

400

300 + 300

400

600

400

300 + 300

400

ABS

SS

ABS

ABS

ABS/

PC

AB

C

Modular tray and box accessories

28-62710Injection tray 400 x 300mm (15¾ x 11¾”)

divided up with space for syringes,

swabs, hypodermic needles, vials and

prepared syringes

19-64806Stainless steel plate with a hole

for locking the box and lid together

19-64808Lock with space for label

Can also be secured with clips19-64680 - 19-64675 - 19-64676

Labels can be put on the plate or text can

be printed directly on the steel plate

Boxes with lids for medicine transportation A) Box (20-34210)

300 x 400 x 100mm (11¾ x 15¾ x 4”)

and lid (20-34201)

300 x 400 x 15mm (11¾ x 15¾ x 5/8”)

B) Box (20-34220)

300 x 400 x 200mm (11¾ x 15¾ x 77/8”)

and lid (20-34204)

300 x 400 x 70mm (11¾ x 15¾ x 2¾”)

Assorted labeling options available

C) Box (20-64220)

600 x 400 x 200mm (235/8 x 15¾ x 77/8”)

and lid (20-64201)

600 x 400 x 15mm (235/8 x 15¾ x 5/8”)

Trays baskets and lids can be

silk-screened with custom printing.

3

4

5

1

2

3

4

5

3

4

2

2

1

315¾

15¾15¾

15¾15¾

11¾ + 11¾

11¾ + 11¾

11¾ + 11¾

11¾ + 11¾

235/8

Labelin

g a

nd a

ccess

orie

s

• Injection molded label holders in Polyamid.

• Stainless steel label holders.

• Labels for bar codes.

• Handles for trays and baskets.

• Alu-clip-holders.

• Attachments for A4 hanging files.

• Frame for catheter holders.

• Module boxes for storing catheters.

“

”

129

PA

PA

Accessories for modules

19-64680Security clips for boxes and lids

19-64675Sealing arrow, red

19-64676Sealing arrow, blue

19-61870Safety Stops for baskets

2 parts, blue

Are used to prevent modules from fall-

ing when they are fully extended out of

cabinets, racks or carts. To be used with

Scan Modul side-panels and runners.

3

4

5

1

2

5

4

5

5

2

600

400

PA

19-61881Handle 400mm (15¾”) blue (incl. locks)

19-61891Handle 600mm (235/8”) blue (incl. locks)

1

1

19-61880Handle 400mm (15¾”) gray (incl. locks)

19-61890Handle 600mm (235/8”) gray (incl. locks)

Handles can be mounted on all plastic containers and baskets from

Scan Modul System with pre-perforated holes on the edge

1

1

EP

20-64290Wall rails 600mm (235/8 ”) for suspending

100mm (4”) deep modules at an angle,

blue, Ral 5013

SMS label systemLabels are available with all types

of clips, and for printing bar codes

by laserprinters and thermoprinters.

3

4

3

4

20-64292Wall rails 600mm (235/8”)for suspending

100mm (4”) deep modules

horizontally, blue, Ral 5013

235/8

15¾

130

PA

PA

PA

PA/PC

PA

Accessories for identification

19-61800Label holders without cover,

Blue,

19-61700White

For labels maximum size of

57 x 38mm (2¼ x 1½”)

19-61818Large label holder without cover

Blue

19-61705White

For labels maximum size of,

38 x 57mm (1½ x 2¼”)

19-61805Large label holder without cover

Can be placed in straight or angled

position. Blue

For labels maximum size of,

38 x 57mm (1½ x 2¼”)

19-61804Transparent cover for label holders

19-61802Transparent cover for large label holders

For labels maximum size of,

57 x 38mm (1½ x 2¼”)

19-61810Credit card size label holders blue

Maximum size 85 x 54mm (33/8 x 2 1/8 )

19-61811 - Plastic card, red

19-61812 - Plastic card, blue

19-61813 - Plastic card, green

19-61814 - Plastic card, white

19-61817 - Plastic card, yellow

19-61816 - Cover, clear

3

4

5

1

2

3

4

5

1

2

2

4

5

1

131

300 + 300

400

SS

PA

PA

Accessories for identification

19-64830Holder for A-5 sheets.

Made in stainless steel.

Can withstand washing

and the autoclave

19-64543Stainless steel plate

for labels or

“Dymo”/”P-Touch” tape

19-64879Label holder vertical large, white

For label max. 100 x 70mm

(37/8 x 2¾”)

19-64805 DPLabel holder, horizontal, white

For label max. 25 x 75mm (1 x 3”)

19-64805 DLabel holder, horizontal, white

For label max. 20 x 70mm (¾ x 2¾”)

3

1

2

3

3

2

1

1

ALU

ALU

19-64857Alu-clip-holder for labels 350mm (13¾”)

for type A cabinets

19-64858Alu-clip-holder for labels

550mm (215/8”)

for type B cabinets

19-64855Alu-profile is available in any length

19-64851End stop for clip-holder

19-64852Center support recommended for

clips-holder when length is more than

1000mm (39½”)

4

5

4

5

5

5

4

11¾ + 11¾

15¾

132

300 + 300

400

600

400

600

400

600

400

ABS

ABS/ALU

ABS/ALU

ABS/PC

Accessories modular trays and -boxes

41-80006Tray 300 x 400 x 200mm (11¾ x 15¾ x 77/8”)

with attachment for A 4

suspension files.

Can be inserted in type A + D

41-80004Tray 600 x 400 x 200mm (235/8 x15¾ x 77/8”)

with attachment for A 4

suspension files.

Can be inserted in type A

18-67331Frame with 4 rails

for suspending catheter holders

400 x 600mm (15¾ x 235/8”)

18-67330Frame with 6 rails for suspending

catheter holders

600 x 400mm (235/8 x 15¾”)

Catheter box holder 18-67652 - Height 475mm (18¾”)

18-67653 - Height 490mm (19½”)

18-67654 - Height 675mm (265/8”)

18-67655 - Height 760mm (30”)

18-67656 - Height 900mm (35½”)

*Partitions shown in picture are optional accessories.

3

5

4

2

41-80002 A4 Suspension files41-80002/01 White

41-80002/02 Yellow

41-80002/03 Green

41-80002/04 Blue

41-80002/05 Red

1

3

4

5

2

1

400

153/

4

153/

4

11¾ + 11¾

153/

415

3/4

153/

4

235/8

235/8

235/8

Handle with STOP 400mm (15¾”)

Partitions for SMS modules20-64206 and 20-64211

20-64270Partition 400x50mm (15¾x2”)

20-64271Partition 600x50mm (235/8 x2”)

20-64253Partition 400x100mm (15¾x4”)

20-64254Partition 600x100mm (235/8 x4”)

20-64266T-piece for partition

Handles type A can be used

on modules to be inserted in either

SCANCELL carts, open steel carts,

transport carts or cabinets

Accessories modular trays, boxes and baskets

Handles type B can be used

on modules to be inserted in either

SCANCELL carts, open steel

carts, transport carts or cabinets

Containers, trays, baskets, inserts and accessories

Please see modular section

133

6

00

400 600

400

4

Handle with STOP 600mm (235/8”)

4

3

6

5

3

6

00

400

600

400

5 6

1 2

2

1

600

400

600

400

19-61890 gray

19-61891 dark blue

19-61892 yellow

19-61893 red

19-61894 green

19-61895 light blue

19-61880 gray

19-61881 dark blue

19-61882 yellow

19-61883 red

19-61884 green

19-61885 light blue

Wire

bask

ets

• Rilsan-coated wire baskets.

• Stackable.

• Partitions for compartmentilization.

“”

23-34504Wire basket

300 x 400 x 50mm (11¾ x 15¾ x 2”)with opening on the front edge.Mesh size approx. 36 x 39mm(13/8 x 1½”)

23-34514Wire basket

300 x 400 x 100mm (11¾ x15¾ x 4”)with opening on the front edge.Mesh size approx. 36 x 39mm(13/8 x 1½”)

135

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

RIL

RIL

RIL

RIL

RIL

Wire baskets with partitions

23-34510Wire basket

300 x 400 x 100mm (11¾ x 15¾ x 4”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (7/8 x 7/8”)

23-64557Partition 300 x 100mm (11¾ x 4”)

23-64551Partition 400 x 100mm (15¾ x 4”)

23-34520Wire basket

300 x 400 x 200mm (11¾ x 15¾ x 77/8”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (7/8 x 7/8”)

23-64558Partition 300 x 200mm (11¾ x 77/8”)

23-64552Partition 400 x 200mm (15¾ x 77/8”)

23-64510Wire basket

600 x 400 x 100mm (235/8 x 15¾ x 4”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm (1 x 1”)

23-64551Partition 400 x 100mm (15¾ x 4”)

23-64555Partition 600 x 100mm (235/8 x 4”)

23-64520Wire basket

600 x 400 x 200mm (235/8 x 15¾ x 77/8”)The basket has double frame wire and stackable corners.Mesh size approx. 23 x 23mm 1 x 1”)

23-64552Partition 400 x 200mm (15¾ x 77/8”)

23-64556Partition 600 x 200mm (235/8 x 77/8”)

All mesh sizes are taken from the bottom of the wire baskets

11¾ + 11¾

11¾ + 11¾

15¾15¾

15¾15¾

15¾

11¾ + 11¾

11¾ + 11¾

11¾ + 11¾

3

4

5

2

1

3

5

4

3

3

2

2

2

5

5

4

4

1

1

Auto

cla

ve b

ask

ets

I and II

• Stainless steel baskets.

• Stackable.

• Partitions for compartmentalization.

• Autoclavable.

“”

137

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

SS

SS

SS

SS

SS

Autoclave baskets, type I

Type I is a traditional basket, which can be stacked on top of another, taking up the same space filled, as well as empty

24-34540Wire basket 300 x 400 x 100mm

(11¾ x 15¾ x 4”)StackableMesh size approx. 45 x 47mm (1¾ x 17/8”)

24-34541Wire basket 300 x 400 x 200mm

(11¾ x 15¾ x 77/8”)StackableMesh size appox. 45 x 47mm (1¾ x 17/8”)

24-64540Wire basket 600 x 400 x 100mm

(235/8 x 15¾ x 4”)StackableMesh size approx. 45 x 47mm (1¾ x 17/8”)

24-64551Partition 400 x 100mm (15¾ x 4”)

24-64555Partition 600 x 100mm (235/8 x 4”)

24-64542Wire basket 600 x 400 x 150mm

(235/8 x 15¾ x 57/8”)StackableMesh size approx. 45 x 47mm (1¾ x 1 7/8”)

24-64553Partition 400 x 150mm

(15¾ x 57/8”)

24-64541Wire basket 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)StackableMesh size approx. 45 x 47mm (1¾” x 17/8”)

24-64552Partition 400 x 200mm (15¾ x 77/8”)

24-64556Partition 600 x 200mm (235/8 x 77/8”)

24-64530Wire basket 600 x 400 x 300mm

(235/8 x 15¾ x 11¾”)StackableMesh size approx. 45 x 47mm (1¾” x 17/8”)

24-64557Partition 400 x 300mm

(15¾ x 11¾”)

11¾ + 11¾

11¾ + 11¾

11¾ + 11¾

15¾15¾

15¾15¾

11¾ + 11¾

11¾ + 11¾

15¾

3

4

5

2

1

3

5

4

1

3

2

5

4

4

2

2

1

138

600

400

600

400

600

400

600

600

400

SS

SS

SS

SS

SS

400

Autoclave baskets, type lI

24-64581Wire basket

600 x 400 x 100mm (235/8 x 15¾ x 4”)Stackable

Mesh size approx. 46 x 48mm (1¾ x 17/8”)

24-64586Partition 400 x 100mm (15¾ x 4”)

24-64585Wire basket

600 x 400 x 150mm (235/8 x 15¾ x 57/8”)Stackable

Mesh size approx. 46 x 48mm (1¾ x 17/8”)

24-64587Partition 400 x 150mm (15¾ x 57/8”)

24-64582Wire basket

600x400x 200mm (235/8 x15 ¾ x 77/8”) Stackable

Mesh size approx. 46 x 48mm(1¾ x17/8”)

24-64588Partition 400x200mm (15¾ x 77/8“)

24-64583Wire basket

600 x 400 x 300mm (235/8 x 15¾ x 11¾”)

Mesh size approx. 46 x 48mm (1¾ x 17/8”)

24-64589Partition 400 x 300mm

15¾ x 11¾ “

Type II. When the baskets are filled they

can be stacked on top of each other.

When empty, by turning the baskets180 degrees,

they can then nest inside each other, taking up less

space.

5

4

3

2

2

1

5

4

3

2

1

5

4

3

235/8

235/8

235/8

15¾15¾

15¾15¾

235/8

235/8

15¾

Instru

ment tra

ys

• Injection molded PPO trays resistant

to liquid disinfectants.

• Vacuum formed PVC trays resistant

to liquid disinfectants.

• Trays for the collection of instruments.

• Containers with drain plugs.

• Containers for insertion of stainless steel baskets.

“

”

140

SS

SS

SS

SS

SS

25-64645Tray 250 x 160 x 70mm

(97/8 x 6¼ x 2¾”)

25-64646Tray 250 x 320 x 70mm

(97/8 x 125/8 x 2¾”)

25-62661Handle for trays (each)

For trays

(25-64645 - 25-64646 - 25-64247)

3

4

5

1

2 25-64647Tray 450 x 320 x 70mm

(17¾ x 125/8 x 2¾”)

3

25-64651Tray with handle

250 x 160 x 70mm (17¾ x 125/8 x 2¾”)

25-64652Tray with handle

250 x 320 x 70mm (97/8 x 125/8 x 2¾”)

25-64653Tray with handle

450 x 320 x 70mm (17¾ x 125/8 x 2¾”)

5

4

4

4

2

1

Instrument trays

Produced in stainless plate according to the AISI standard with 5mm diameter holes, in a triangular pattern with 7.5mm between the centres

141

600

400

600

400

PVC

SS

SS

650

450

PVC

650

450

PVC

31-64202 Lid 600 x 400 x 15mm

(235/8 x 15¾ x 5/8 “)

31-64221Box 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)

31-64222Box 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)with drain plug

Disinfection containers

31-65221Box 650 x 450 x 220mm

(255/8 x 17¾ x 85/8”)

31-65202Lid 650 x 450 x 10mm

(255/8 x 17¾ x 3/8”)

31-65222Box 650 x 450 x 220mm

(255/8 x 17¾ x 85/8”) with drain plug

31-65202Lid 650 x 450 x 10mm

(255/8 x 17¾ x 3/8”)

31-65223Drain plug for PVC-box 31-65221

containing liquid disinfectant

3

4

5

1

2

24-64545 Stainless steel basket 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)

for insertion in box (31-65221)

for the collection of soiled instruments

3

3

2

1

1

1

5

4

4

15¾

235/8

255/8

17 3/4

255/8

235/8

17 3/415¾

20-34302Lid/Tray 300 x 400 x 15mm

(11¾ x 15¾ x 5/8”)

For tray/box (20-34311 and 20-34321)

31-34219 Perforated stainless steel, instrument tray

300 x 400 x 170mm (11¾ x 15¾ x 6¾”)

31-34220Partition for stainless steel instrument tray

31-34221 PVC

Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”)

with 2 openings

31-34211 PVC

Tray 300 x 400 x 100mm (11¾ x 15¾ x 37/8”)

31-34218 PVC

Tray 300 x 400 x 170mm (11¾ x 15¾ x 6¾”) 31-34202 PVC

Lid 300 x 400 x 15mm (11¾ x 15¾ x 5/8”)

142

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

300 + 300

400

SS/

PVC

PPO

PPO

PPO

PPO

Instrument Trays and boxes

and disinfectant

20-34311Tray 300 x 400 x 100mm

(11¾ x 15¾ x 37/8”)

for liquid disinfectants,

collection of instruments and utensils

20-34303Lid/Tray 300 x 400 x10mm

(11¾ x 15¾ x 3/8”)

For tray/box (20-34311 and 20-34321)

20-34321Box 300 x 400 x 200mm

(11¾ x 15¾ x 77/8”)

for liquid disinfectants

collection of instruments and utensils

3

4

5

1

2

3

1

4

1

1

5

1

1

1

2

11 ¾ +11 ¾

15¾15¾

15¾

11 ¾ +11 ¾

11 ¾ +11 ¾

11 ¾+11 ¾

11 ¾+11 ¾

15¾15¾

20-64311Tray 600 x 400 x 100mm

(235/8 x 15¾ x 4”)

Designed for transport of soiled

instruments in liquid disinfectant

143

300 + 300

400

600

400

600

400

600

400

600

400

PPO/

PC

PPO

PPO

PPO

PPO

Trays and boxes for instrument collection

and disinfection

20-34303Lid tray 300 x 400 x 10mm (11¾ x 15¾ x 3/8”)

with 2 openings

21-62215Sliding lid 240 x 120mm (9½ x 4¾”) - PC

Controls noxious oders and fumes.

Can be used together with

tray 20-34311and box 20-34321

20-64302Lid tray 600 x 400 x 15mm

(235/8 x 15¾ x 5/8”)

For boxes (20-64322 and 20-64328)

20-64328Box 600 x 400 x 280mm

(235/8 x 15¾ x 11”)

Designed for transport of soiled

instruments in liquid disinfectant

20-64322Box 600 x 400 x 200mm

(235/8 x 15¾ x 77/8”)

Designed for transport of soiled

instruments in liquid disinfectant

3

4

5

1

2

3

1

4

5

1

2

15¾

11¾ + 11¾

11¾ + 11¾

15¾

15¾

11¾ + 11¾

11¾ + 11¾

15¾

15¾

11¾ + 11¾

Shelv

es

• Stainless steel or Rilsan coated wire shelves.

• Shelves with raised edges.

• Wire shelves for container transportation/storage.

• Shelves in melamine or high-pressure laminate.

“”

145

300 + 300

400

600

400

300 + 300

400

600

400

300 + 300

400

LAM

LAM

MEL

MEL

SS

Shelves

22-34400Shelf-Laminate

300 x 400 x 6mm(11¾ x 15¾ x 6”)

22-64400Shelf-Laminate

600 x 400 x 6mm

(235/8 x 15¾ x 1/4”)

22-34403Shelf-Melamine

300 x 400 x 12mm

(11¾ x 15¾ x ½”)

22-64403Shelf- Melamine

600 x 400 x 12mm

(235/8 x 15¾ x ½”)

22-34401Shelf with beaded edge

300 x 400 x 15mm

(11¾ x 15¾ x 5/8”)

22-64401Shelf with beaded edge

600 x 400 x 15mm

(235/8 x 15¾ x 5/8”)

3

4

5

1

2

3

5

4

5

2

115¾15¾

11 ¾ + 11 ¾

11 ¾ + 11 ¾

15¾15¾

15¾

11¾ + 11¾

235/8

235/8

146

300 + 300

400

600

400

300 + 300

400

600

400

600

400

SS

SS

SS

RIL

RIL

Wire shelves

22-34501Wire shelf 300 x 400mm

(11¾ x 15¾”)

Mesh size

approx. 22,5 x 22,5mm

(7/8 x 7/8”)

22-64501Wire shelf 600 x 400mm

(235/8 x 15¾”)

Mesh size

approx. 22,5 x 22,5mm

(7/8 x 7/8”)

22-34502Wire shelf 300 x 400mm

(11¾ x 15¾”)

Mesh size

approx. 22,5 x 23,0mm

(7/8 x 7/8”)

22-64502Wire shelf 600 x 400mm

(235/8 x 15¾”)

Mesh size

approx. 22,5 x 23,0mm

(7/8 x 7/8”)

22-64504Wire shelf 600 x 400mm

(235/8 x 15¾”)

for container in DIN size

600 x 300mm

(235/8 x 11¾”)

Mesh size

approx. 22,5 x 23,0mm

(7/8 x 7/8”)

3

4

5

1

2

3

5

4

2

1

11¾ + 11¾

235/8

15¾15¾

15¾15¾

11¾ + 11¾

235/8

235/8