Embed Size (px)
Citation preview
An ISO 9001:2000 Certified Company
© NVR Forgings 2010. All rights reserved.
Address: 10 Warayana Industrial Complex, Leather Complex Road, Jalandhar City, State - Punjab, India. Phone: +91.181.2650958, Fax: +91.181.2650873, Cell: +91.98761.57400
Web: http://www.nvrforgings.com | E-mail: [email protected] | [email protected]
Page 1
WOODWORKING TOOLS
NVR bring decades of experience with a combination of traditional and modern manufacturing techniques. The traditional element is found in fine grained grey iron body casting for strength and resilience. Modern manufacturing techniques include for example the use of CNC ( Computer Numeric Control ) machining centres which impart a precise and consistent finish bases and sites, frog seating and cutting iron, fully hardened cutting blade. Chrome plated mirror polished cast iron lever, adjusting nut, polished handle, epoxy powder coated and lacquered base, makes NVR plane looks as well as it works, and works as well as it looks.
PLANES SELECTION GUIDE
TYPES APPLICATIONS
Jack Plane - Smooth Base Used for stock removal and fine finishes Jack Plane - Corrugated Base Grooved base helps in stock removal in confined areas Jack Plane - Record Type Used for lighter jobs Block Plane Used for end grain or where single handed job is needed Block Plane - Sheet Metal Used where single handed job is required Rabbet Plane Used to foram groove joints in wood working Craftsman Plane Used for stock removal and fine finishes Block Plane Special Pattern The block plane has cutter seated at 21 °, adjustment for depth of cut & cutter Alignment Spoke Shaves Fully adjustable for depth of cut with twin thumb screw
An ISO 9001:2000 Certified Company
© NVR Forgings 2010. All rights reserved.
Address: 10 Warayana Industrial Complex, Leather Complex Road, Jalandhar City, State - Punjab, India. Phone: +91.181.2650958, Fax: +91.181.2650873, Cell: +91.98761.57400
Web: http://www.nvrforgings.com | E-mail: [email protected] | [email protected]
Page 2
NVR-701 Jack Plane - Smooth Base
Made from fine grey iron castings. Fully hardened cutting blade.
Fitted with chemically tested and seasoned wood handle and knob.
SIZE
INCH MM NO. BLADE SIZE IN
QTY./CTN.Pcs.
VOLUMECu. M.
8 200 3 1 3/4 15 .033
9 225 4 2 15 .047
14 350 5 2 10 .043
18 450 6 2 1/4 8 .051
22 550 7 2 1/4 8 .077
NVR-702 Jack Plane - Corrugated Base Plastic Handle
Made from fine grey iron castings. Fully hardened cutting blade.
Fitted with chemically tested and seasoned wood handle and knob.
SIZE
INCH MM NO. BLADE SIZE IN
QTY./CTN.Pcs.
VOLUMECu. M.
8 200 3 1 3/4 15 .033
9 225 4 2 15 .047
14 350 5 2 10 .043
18 450 6 2 1/4 8 .051
22 550 7 2 1/4 8 .077
NVR-703 Jack Plane - Record Type
Made from fine grey iron castings. Fully hardened cutting blade.
Fitted with chemically tested and seasoned wood handle and knob.
SIZE
INCH MM NO. BLADE SIZE IN
QTY./CTN.Pcs.
VOLUMECu. M.
8 200 3 1 3/4 15 .033
9 225 4 2 15 .047
14 350 5 2 10 .043
18 450 6 2 1/4 8 .051
22 550 7 2 1/4 8 .077
An ISO 9001:2000 Certified Company
© NVR Forgings 2010. All rights reserved.
Address: 10 Warayana Industrial Complex, Leather Complex Road, Jalandhar City, State - Punjab, India. Phone: +91.181.2650958, Fax: +91.181.2650873, Cell: +91.98761.57400
Web: http://www.nvrforgings.com | E-mail: [email protected] | [email protected]
Page 3
NVR-704 Rabbet Plane
Seasoned cast iron body, blade of EN 44 steel induction hardened. Body powder coated, stoving clear lacquered with
steel nickel. Chrome plated accessories.
SIZE MM
QTY./CTN. Pcs.
VOLUME Cu. M.
38 10 .026
NVR-705 Block Plane
Made from fine grey iron castings. Fully hardened Carbon steel cutting blade.
SIZE
MM NO. QTY./CTN.
Pcs. VOLUME
Cu. M. 140 102 60 .039
175 110 30 .032
NVR-706 Jack Plane Blade
Fully hardened Alloy Steel cutting blade.
SIZE Inch MM
QTY./CTN. Pcs.
VOLUME Cu. M.
1 3/4 45 240 .009
2 50 200 .010
2 1/4 57 160 .009
NVR-707 Block Plane Blade
Fully hardened Carbon Steel cutting blade.
SIZE INCH NO.
QTY./CTN. Pcs.
VOLUME Cu. M.
34 102 400 .039
42 110 300 .032
An ISO 9001:2000 Certified Company
© NVR Forgings 2010. All rights reserved.
Address: 10 Warayana Industrial Complex, Leather Complex Road, Jalandhar City, State - Punjab, India. Phone: +91.181.2650958, Fax: +91.181.2650873, Cell: +91.98761.57400
Web: http://www.nvrforgings.com | E-mail: [email protected] | [email protected]
Page 4
NVR-708 Rabbet Plane Blade
Blade made of EN 44 Steel Induction Hardened.
SIZE MM INCH
QTY./CTN. Pcs.
VOLUME Cu. M.
38 1.1/2 500 .012
NVR-709 Hand Drill Machine
Fully hardened Carbon Steel Cutting Blade.
SIZE INCH MM
QTY./CTN. Pcs.
VOLUME Cu. M.
1/4 6 30 .051
3/8 10 30 .051
NVR-710 Breast Drill Machine
Two speed drill. Three jaw precision chuck.
Detachable driving and side handles.
SIZE INCH MM
QTY./CTN. Pcs.
VOLUME Cu. M.
3/8 10 20 .057
1/2 12 10 .047
NVR-711 G-Cramp Standard
Frame made from malleable Iron. High quality steel screw with drop handle. Stove enameled finish frame prevent rust.
SIZE INCH MM
QTY./CTN. Pcs.
VOLUME Cu. M.
2 50 80 .045
3 75 50 .035
4 100 30 .035
5 125 30 .045
6 150 20 .036
8 200 15 .044
10 250 10 .036
12 300 8 .031
14 350 6 .030
An ISO 9001:2000 Certified Company
© NVR Forgings 2010. All rights reserved.
Address: 10 Warayana Industrial Complex, Leather Complex Road, Jalandhar City, State - Punjab, India. Phone: +91.181.2650958, Fax: +91.181.2650873, Cell: +91.98761.57400
Web: http://www.nvrforgings.com | E-mail: [email protected] | [email protected]
Page 5
NVR-712 T-Bar Cramps
Bar manufactured from special 'T' bar section steel. Head & Slide made of cast iron.
Suitable for heavy duty work. SIZE
FT MM QTY./CTN.
Pcs. VOLUME
Cu. M. 2 600 10 .037
2.1/2 750 10 .046
3 900 10 .054
3.1/2 1050 8 .048
4 1200 8 .054
4.1/2 1350 6 .046
5 1500 6 .050
5.1/2 1650 6 .068
6 1800 6 .074
6.1/2 1950 4 .062
7 2100 4 .067
8 2400 4 .076
NVR-713 Wood Working Vice
Body made from cast iron. High quality steel screw with drop handle.
SIZE
INCH MM QTY./CTN.
Pcs. VOLUME
Cu. M. 6 150 12 .026
8 200 8 .022
9 225 4 .025
10 250 4 .031
12 300 2 .042
