REMOTE

Airmax Remote Technical Datasheet

airmaxremote.com

GPS RECEIVER

PLUG AND PLAY INSTALLATION

SUPPORTS GARAGE DIAGNOSTICS

EOBD CONNECTED

3 AXIS ACCELEROMETER

MULTIPLE POWER MODES

Remote Telematics Unit (RTU)The Airmax RTU is a high performance, in-vehicle unit that is connected to the Onboard Diagnostics Connector (EOBD). Capable of providing advanced Tier 1 CAN Bus data, such as vehicle diagnostics information. This supports a wide variety of telematics data services for a range ofcustomer needs, which includes; Maintenance information, driver behaviour and profiling, fuel events including MPG, and also the GPS Tracking for added vehicle security.

REMOTE

airmaxremote.com

Designed for the passenger car and light commercial vehicle market

Direct connection to host vehicles diagnostics

“Over the-air” software updates

Simple, plug and play installation with around 98% of typical fleet vehicles

Powerful, ARM based processor

Internal GSM/GPRS modem

High sensitivity GPS receiver

Additional CAN interface for external and auxiliary devices (e.g. camera)

Integral 3-axis accelerometer and gyroscope

Factory programmed with a powerful suite of vehicle and driver monitoring features

Sophisticated data management and event detection modes

Multiple Power Modes to minimise power consumption

“Heartbeat” function during power-down

GPRS plus SMS, SMS fall-back for “overair” diagnostics

Simple, modular, construction and rugged enclosure

Supports the simultaneous connection of a garage diagnostics tool

Enhancements and extra functionality provided via external modules

Key Features:

Compact unit can be mounted in any convenient location

Installation times range from 10 to 20 minutes

EOBD Connected

Plug and Play installation allows quick installation without specialised training

Automatic configuration and commissioning

Fusing and current limiting protect the vehicle from unit failures

Install and Configuration:

SIMPLE UNOBTRUSIVE INSTALLATION

CALIBRATION & CONFIGURATION

SAFE

Remote Telematics Unit (RTU)REMOTE

airmaxremote.com

Performance

Size 20 x 50 x 110 mm

Weight 150g

Voltage Range+12 volt nominal, automotive supply – 10 to 16 volts operating (+24 volt nominal operation as a build option)

PowerConsumption

Operating < 180mA (2.5A peak), “Sleep” <5mA

Data Storage Capable of storing at least 1 month of normal data

M.T.B.F. 10 years

Environmental BS EN 60721-3-5:1997 Class 5M3

IP Rating 433 (IK06)

EMC EMC Type Approved to 72/245/EC (as last amended by 2009/19/EC)

AutomotiveApproval

E and e marked (VCA Approval: 10R-048396)

TemperatureRange

-40C to +85C, storage, -25C to +70C, operating

EOBD vehicle diagnostics (J1962) compatible; in-line connection for power, and data

Electrical and logical connection to all ISO 15031bus types

Separate ignition sense line for non-standard vehicle types

All interfaces fully automotive compatible and safe for direct

Four status LEDs (RED, AMBER, YELLOW, GREEN) indicating current state of operation

LIN (CAN vehicles only), low speed automotive bus for connection to peripheral devices, includes the Airmax Smart Card Reader

Memory Card - support an internal MMC memory card

Interfaces:

VEHICLE

USERGENERAL

Connection to the vehicle

Suitable for direct connection to vehicle supply

Current consumption in the Sleep mode consistent with automotive standards

FMS Truck Interface – cable options supporting 48v supplies Internal GSM and / or GPS antennas

Serial RS232 Interface

Non-GPS and/or accelerometer option for cost reduced applications

Memory Card

WIFI - via daughter board

Bluetooth – via daughter board

Build Options:

DAUGHTER BOARD OPTIONS

Auxiliary Modules

The display unit is a high performance, vehicle connected, in-vehicle unit, capable of displaying a wide variety of telematics events for a range of customer needs, which include; driver monitoring and training, economy performance and benchmarking .

Automotive compliance for Auto dimming for night usage

Additional Auto backlighting for night usage

LED Bar indicating current engine load conditions

LED Bar providing long term driving economy

Audible alert and indication on Driving Events (KPI’s) or poor fuel economy

Direct connection to CAN 2.0b Interface

Designed for the passenger car market and operating from a nominal +12V vehicle supply (+24V Operation supported)

“Over the-air” software updates via the Telematics unit

Simple, plug and play installation compatible using a using a ‘T-Harness’‘

Multiple Power Modes to minimise power consumption

Simple, modular, construction with a single main printed circuit board mounted inside a compact, rugged enclosure

Private or Business trip selection during the trip

Driving Behavior Notifications and real time feedback for excessive Speed, Acceleration, Braking, Idling and Revving Events

Customizable Membrane

Configurable display options

Simple Unobtrusive Installation - The unit is small and can be mounted in any convenient location with the vehicles dashboard.

Calibration & Configuration - Simple “Plug and Play” installation allows the unit to be installed without any specialised training and automatic configuration and commissioning

Ability to reduced functionality to Privacy Switch only

Auxiliary Modules:

Key Features:

DRIVER DISPLAY UNIT (DFU)

OPTIONS

INSTALLATION AND CONFIGURATION

BUILD OPTIONS

Performance

Size 68 x 28 x 12 mm

Weight 25g

Voltage Range +12-volt nominal, automotive supply – 10 to 30 volts operating

PowerConsumption

Operating < 26mA (100mA Peak), “Sleep” < 12mA

TemperatureRange

-40C to +85C, storage, -25C to +70C, operating

REMOTE

airmaxremote.com

For driver ID and supporting all current smart card and tag formats

Connecting via CAN to the RTU and providing additional analogue and digital interfaces

Emergency Services Auxiliary Modules:

AIRMAX SMART CARD READER AIRMAX VEHICLE INTERFACE MODULE (VIM)

Auxiliary Modules

Reads Mifare Cards

LIN Interface

Siren Interface

Configurable inputs for Bluelights, ‘At Scene’ etc.

LIN Interface

REMOTE

airmaxremote.com

Performance

Size90 x 46 x 18mm (Card Reader)

65 x 65 x 20mm (VIM)

Weight15g (Card Reader)

25g (VIM)

Voltage Range +12-volt nominal, automotive supply

PowerConsumption

Operating < 35mA

TemperatureRange

40C to +85C, storage,

25C to +70C, operating

AutomotiveApproval

VIM E and E Marked (VCA Approval: E11 – 035653)

Card Reader E and E Marked (VCA Approval: E11 – 035654)

The Airmax Emergency Services Smart Card Read and Vehicle Interface Modules connect with the Airmax RTU via the CAN to provide our key additional Emergency Services offerings. This includes Driver ID, Sirens, Bluelights and ‘At Scene’ reporting.