Upload
jessica-meyer
View
5.957
Download
8
Tags:
Embed Size (px)
DESCRIPTION
Citation preview
Adding Waypoints to ArcMap
What do I do after I collect the waypoints with the GPS units?
Download the waypoints to the
computer
1. Download the waypoints from the GPS units into
Garmin MapSource software.
• Start Menu > All Programs >Garmin >MapSource
MapSource
• Click on Transfer>Receive From Device
MapSource• Click the Find
Device Button and select the boxes you wish to receive
• Usually you just want Waypoints and Tracks
• Press the Receive button when ready
MapSource
• Waypoints can be seen to the left hand side of the screen
MapSource
• Right Click on a waypoint
• At the bottom of the menu click on Waypoint(s) Properties…
MapSource
• Here you can change the name and symbol
MapSource
• You can also edit the Tracks
• Right click on a track and click on Track Properties
MapSource
• Here you can change the name and color
MapSource• Once you finish editing your
waypoints and tracks you need to send them back to the GPS unit but this time click
Send to Device (make sure to turn GPS on)
MapSource
• Click the Find Device Button and select the boxes you wish to receive
• Usually you just want Waypoints and Tracks
• Press the Send button when ready
MapSourceWhen data is sent press ok and close
MapSource
2. Download waypoints into DNR Garmin Software
• Start Menu > All Programs >DNRGarmin >DNRGarmin
Make sure the GPS is turned ON BEFORE opening the program
• Start Menu > All Programs >DNRGarmin >DNRGarmin
MN DNR - Garmin• Click on Waypoint>Download
MN DNR - Garmin• Delete waypoints you do not want by
selecting the whole row and pressing the red x button
• Always delete the Garmin Taiwan, Garmin Europe, and Garmin waypoints
MN DNR - Garmin
Click on File >Save To >File…
MN DNR - GarminThen save the waypoints as a Text file (*.txt)
3. Import the Waypoints into ArcMap
• Close MN DNR – Garmin• Turn of the GPS unit• Open ArcMap
• Start Menu > All Programs >ArcGIS >ArcMap 10
ArcMap
ArcMap
ArcMap Select the text file you saved and click Add
ArcMap
• Make sure there is a Geographic Coordinate System in the Description Box
• Click OK
ArcMap
• Right Click on the Event layer you just created
• Click on Data >Export Data
ArcMap
• Rename the Export Output to a logical name• Click OK
ArcMap
• Click Yes
ArcMap
• Right click on the Event layer and click Remove
ArcMap
• You the waypoints are now a real layer on the Map
• Click to zoom in and see them better
ArcMap
You can repeat this for as many layers as you want