Presented byPatel Kaushal A.D12CL067A Training Report PresentationInternal Guide: Prof. Neha ChauhanExternal Guide:Hiren G. DesaiSAI CONSULTANT,Surat1SAI CONSULANTS was founded in 1990 by Mr. Hiren G. Desai, a Civil Engineer M.E. (structure) by qualification.He is consulting structure engineer and Government approved Valuer.

Ongoing projects of SAI CONSULTANTS: OmoroseCorona heightsFortune mallPalash paladiyaAvadh RegaliaCopper stone

Introduction About SAI CONSULTANTSHow presentation will benefit audience: Adult learners are more interested in a subject if they know how or why it is important to them.Presenters level of expertise in the subject: Briefly state your credentials in this area, or explain why participants should listen to you.2To gain practical knowledge and understanding the practices done on site by a structural consultancy firm.To know the methods used by structural consultancy for estimation of respective projects.To learn about detailed study of Architectural drawings and gain of analytical skills as a structural engineer.To learn modeling, analysis and design of G + 3(with basement) low rise Building using STURDS.

ObjectivesExample objectivesAt the end of this lesson, you will be able to:Save files to the team Web server.Move files to different locations on the team Web server.Share files on the team Web server.

3Chapter 1: EstimationChapter 2: Site workChapter 3: Modeling, analysis and design of G + 3(with basement) low rise Building using STURDSTraining OutlineLesson descriptions should be brief.

4Quantity of raft foundation:Layout of foundation:R.C.C raft Foundation.pdfR.C.C raft Foundation Reinforcement.pdf

Total quantity of R.C.C = 479.891 Cu.mTotal quantity of steel reinforcement = 25944.4811 Kg

Chapter 1: Estimation

Chapter 2: Site WorkName of buildingOmoroseDesigned useResidential BuildingNo. of FloorsBasement + G + 12Floor to floor height10Type of structureRCC Framed structureRoofingRCC Slab

Excavation:-Excavation was carried out both manually as well as mechanically.Depth of excavation was 54 from Ground Level.

Chapter 2: Site Work

R.C.C. Raft Footing:-The reinforced concrete raft is designed to transmit the whole load of the building from the raft to the ground.Raft foundations may be used for buildings on compressible ground such as very soft clay, alluvial deposits and compressible fill material.Raft foundations are used to spread the load from a structure over a large area.Normally raft foundation is used when large load is to be distributed.Thickness of pad 30 and 36.Apart from raft foundation, individual footings were used.

STRUDS is an ideal software solution for the usage of structural engineers for the analysis of design.It is very easy and useful software for structure engineer.Analysis can be done by importing beam grit file from the autocad.Stiffness matrix and finite element method are use for analysis in STRUDS.Limit state method is use for design of RC member.

Chapter 3:Modelling, Analysis and Design of a Low Rise Building using Struds

Project Detail Type of StructureRCC Frame StructureDesignated UseResidential and CommercialNo. of FloorsBasement + G + 3Design of a Low Rise Building Using STRUDSTypical Section:

Imported DXF of beam grit from AUTOCAD

Columns can be marked at the required nodes by following the below steps: select MARK COLUMN SEQUNTLIALLY ON DEFINED NODES

To change the orientation of column, size and shape of column select MODIFY Menu > COLUMN > ORIEN or select

Column Marking, Column Size, Shape and Section in STRUDS

.

Material:For defining material first select CREATE Menu > BUILDING > PROPERTIES > DEFINE > MATERIAL or select

Section:For defining Section first select CREATE Menu > BUILDING > PROPERTIES > DEFINE > SECTION or select

Attaching section:For attach section CREATE > BUILDING > ATTACH > SECTION or select

Defining and Attaching Materials and Section

Attaching Walls:Follow the steps CREATE>BUILDING>WALL>DEFINE or select

Slab Attachment:The slab can be attached to the building by following the steps: CREATE> BUILDING > SLAB > RECTANGULAR or select

This top level file menu has several sub menu options, related to saving the analysis files, and performing analysis, which have been listed belowPre-Analysis EnquiryAnalysis OptionsPerform Analysis Pre-Analysis Enquiry:

Analysis

Analysis Option:

Perform Analysis:Using this option, you can directly perform the analysis of the structure, for any structure type.

R.C.C. member is design by R.C.C. design mode of STRUDSSlab designBeam designColumn designFooting design

R.C.C. Design Member Design from STRUDS

3D Model of a Low Rise Building Acquired From STRUDS

Beam Schedule.pdfColumn schedule report.pdfslab schedule.pdfSample Schedule Report from STRUDSIn my two month training, I gain practical knowledge which is use in civil engineering field.I also learnt about construction techniques, labor management, time and cost management and techniques best suitable for site activities.Also I learnt the way to work in an organization, the importance of maximum commitment and the most importance of team spirit.And I also learnt analysis and design of structure using STRUDS.Conclusion THANK YOU