7/26/2019 91be01390f9b98ed2489f6eec88c1878.pdf

1/2

ZAC du Pont d'Issy, Issy les Moulineaux, France

ALIMAK TCL provides reliable crane cab access during

construction of major commercial tower in France

Case study:

7/26/2019 91be01390f9b98ed2489f6eec88c1878.pdf

2/2

Alimak Hek, in association with the global crane

manufacturer Manitowoc, installed an ALIMAK TCL on

a Potain tower crane located at the ZAC du Pont dIssy

commercial tower in Issy les Moulineaux, France.

Scheduled for completion in 2016, ZAC du Pont dIssy

is a 53 m high tower that will comprise 17 floors of mixed-

use commercial and residential space. The ALIMAK TCL

was installed on the base of the existing reinforced Potain

tower crane mast, and was equipped to service a height of

30 - 70 m.

The ALIMAK TCL is designed with operator safety,

comfort and usability in mind. Capable of transporting

a maximum of two passengers (200 kg) at a time, the lift

provides a fast, ergonomic and all-weather alternative to

a traditional crane ladder. With lifting speeds of 24 m/

minute, the ALIMAK TCL minimizes travel time for crane

operators and service personnel, thereby maximizing

crane working time.

The ALIMAK TCL offers unbeatably fast external

installation, and utilizes a compact mast and rack made of

durable galvanized steel. With no modifications to crane

masts required, the ALIMAK TCL is simple to retrofit to

existing tower crane systems and is fully compliant with

EN 81-43: Lifts for Cranes safety requirements.

An ALIMAK TCL was installed on a Manitowoc Potain tower crane during construction

of the ZAC du Pont d'Issy commercial tower in France. The Alimak TCL maximizes crane

utilization by providing reliable and smooth crane cab access with easy installation for

minimal crane downtime.

Case study:

DETAILS

Location: ZAC du Pont d'Issy, Issy les Moulineaux, France

Application: Tower crane lift

Type: ALIMAK TCL

Capacity: 200 kg or 2 persons

Car size: 0.63 m x 1.2 m x 2.0 m (W x L x H)Speed: 24 m/min (79 ft/m)

Lifting height: 30 - 70 m (98 - 230 ft)

1581

EN/Feb.

2016

www.alimakhek.com

Pictures are illustrative only and do not necessarily show the configuration of products on the market at a given point in time. Products must be used in conformity with safe practice and applicable statutes, regulations,

codes and ordinances. Specifications of products and equipment shown he rein are subject to change without notice. Copyright 2016 Alimak Hek Group AB. All rights reserved. Alimak Hek, Champion, Alimak, Heis-

Tek, Hek and Scando are registered trademarks of Alimak Hek Group AB.