2015 Conc Mix Design Flyer
2015 Conc Mix Design Flyer
2015 Conc Mix Design Flyer
2015 Conc Mix Design Flyer
2015 Conc Mix Design Flyer

2015 Conc Mix Design Flyer

  • View
    217

  • Download
    0

Embed Size (px)

Text of 2015 Conc Mix Design Flyer

  • 8/9/2019 2015 Conc Mix Design Flyer

    1/5

    See attached listing of tests we perform in our AASHTO Accredited Laboratory .

    HAVE YOU COMPLETED YOUR 2015 CONCRETE MIX DESIGNS?

    15 5 % %

    ACT NOW...AND SAVE Contact

    by April 30, 2015 and receive $250 off your first Concrete Mix Design. Send 5 or more at one time

    and receive 15% off the total. 2 2 5 5 0 0

    $ $ 2 2 5 5 0 0 1 1 5 5 % %

  • 8/9/2019 2015 Conc Mix Design Flyer

    2/5

    Soil Tests Accredited Test Procedure

    Designations

    Atterberg Limits (LL, PL, and PI), Method A (multi-point) D4318/T89 and 90 Atterberg Limits (LL, PL, and PI), Method B (1-point) D4318/T89 and 90

    Chloride

    Density and Moisture by Nuclear Methods D6938/T310

    Direct Shear (CU Test) 3-Point Envelope - in situ T236

    Gradation with Minus #200 Wash C136 and D1140/T27

    Hydrometer

    Minus #200 Wash D1140

    Moisture Content D2216/T265

    Moisture/Density Relationship (Proctor) D698 and 1557/T99 and 180

    Natural Moisture and Density

    Organic Content (ASTM D2974)

    pH D4972

    Proctor Check Point

    Relative Density (maximum/minimum wet or dry method)

    Resistivit -Lab ASTM G571

    2015 LABORATORY TESTS

    SOIL TESTS

    R-Value D2844/T190

    Specific Gravity (AASHTO T100)

    Swell/Consolidation D4546

    Unconfined Compressive Strength D2166/T208

    USCS (Unified Soil Classification System) D2487

    Water Soluble Sulfates

    Soil Stabilization Tests

    Compressive Strength w/ M/D (ASTM D1633-cement or D5102 - lime)

    Freezing/Thawing

    Mix Design (cement or lime)

    pH for estimating lime proportions (ASTM D6276)

    Wetting/Drying

    2015 Laboratory Tests.xls

    7108 South Alton Way, Building B • Centennial, Colorado 80112 • www.cesareinc.com

    Phone 303-220-0300 • Fax 303-220-0442 Page 1 of 4

  • 8/9/2019 2015 Conc Mix Design Flyer

    3/5

    2015 LABORATORY TESTS

    Concrete Tests Accredited Test Procedure

    Designations

    Abrasion Resistance of Horizontal Concrete Surfaces, sample delivered C779, Procedure C Absorption and Density (unit weight)

    Accelerated Cure Specimens

    Compressive Strength (core) C42/T24

    Compressive Strength (cylinders) C31, 617, 1231 and 39/

    T23, 231 and 22

    Coring Operations C42

    Cracking Tendency Test (AASHTO T334)

    Flexural Strength (beam) C78/T97

    Making and Curing Test Specimens in Laboratory

    Mix Design (Compression)

    Mix Design (Flexural)

    Mix Design (High Early or Optimized)

    Mix Design Verification Compression (1-point)

    Mix Design Verification Flexural (1-point)

    Rapid Chloride Permeability, 2 Specimens C1202/T277

    CONCRETE AND MASONRY TESTS

    Restrained Shrinkage (ASTM C878)

    Scaling Resistance (ASTM C672) at 50 cycles, 2 specimens

    Shrinkage Measuring (03300 modified ASTM C157) C157/T160

    Slab on Ground Moisture and Humidity Testing (E 1907, Electrical Impedance; F 1869, CaCl and F 2170, RH)

    Slump, Unit Weight, Air Content, and Temperature C143, 138, 172, 231 and 1064/ T119, 121, 141, 152 and 309

    Specimen Saw Cutting/Trimming

    Static Modulus of Elasticity (ASTM C 469)

    Sulfate Durability (ASTM C 1012)

    Tensile Strength C496/T198

    Thickness (core)

    Underwater Abrasion Resistance Testing, 3 Specimens per set ASTM C1138

    Water Soluble Chloride Ion in Concrete (ASTM C1218), drilled sample

    Masonry Tests

    Absorption and Density (unit weight) - full size specimen

    Absorption and Density (unit weight) - coupon specimen

    CMU Coupon Compressive Strength (ASTM C140)

    CMU Freeze/Thaw (ASTM C1262) @ 100 cycles

    CMU Freeze/Thaw (ASTM C1262) @ 150 cycles

    CMU Prism Compressive Strength

    Grout and Mortar Cubes (3 Cubes/Set) C780 (Annex 6)

    Prism Grout C1019 (sampling and testing)

    Specimen Saw Cutting/Trimming

    2015 Laboratory Tests.xls

    7108 South Alton Way, Building B • Centennial, Colorado 80112 • www.cesareinc.com

    Phone 303-220-0300 • Fax 303-220-0442 Page 2 of 4

  • 8/9/2019 2015 Conc Mix Design Flyer

    4/5

    2015 LABORATORY TESTS

    HMA Tests Accredited Test Procedure

    Designations

    Binder Ignition Oven (BIO) AC Content D6307/T308 BIO AC Correction Factor D6307/T308

    Chemical Extraction AC Content D2172/T164 (plant control)

    Coring Operations C42

    Density by Nuclear Methods D2950

    Gradation D5444/T30

    Hveem Stability D1560 (stability)/T246/CP-L 5106

    Lottman (tensile strength ratio) D4867/T283

    Marshall Tests (3 pucks Sp.G., Stab/Flow and AV) D6926 and 6927/T245 and 269

    Maximum Theoretical Specific Gravity (Rice Value) D2041/T209

    Specific Gravity (bulk), Air Voids and Thickness D2726 and 3203/T166 and 269

    Thickness

    SMA Asphalt Drain Down (AASHTO T305)

    Volumetric Properties D6925/T312/CP-L 5115

    Marshall Mix Design - MS 2

    Marshall Mix Desi n Verification 1- oint

    HOT MIXED ASPHALT (HMA) TESTS

    SuperPave Mix Design

    SuperPave Mix Design Verifications (1-point)

    2015 Laboratory Tests.xls

    7108 South Alton Way, Building B • Centennial, Colorado 80112 • www.cesareinc.com

    Phone 303-220-0300 • Fax 303-220-0442 Page 3 of 4

  • 8/9/2019 2015 Conc Mix Design Flyer

    5/5

    2015 LABORATORY TESTS

    Aggregate Tests Accredited Test Procedure

    Designations

    Aggregate Durability Index (ASTM D3744) Atterberg Limits (LL, PL, and PI), Method B (1-point) D4318/T89 and 90

    Clay Lumps and Friable Particles (per procedure grading) C142/T112

    Density (unit weight) and Voids C29/T19

    Direct Shear (CU Test) 3-Point Envelope T236

    Fine Aggregate Angularity (uncompacted void content) C1252/T304

    Flat and Elongated Particles (per procedure grading)

    Fractured Faces (per procedure grading)

    Freezing/Thawing of Aggregate (AASHTO T103), 50 cycles

    Gradation with Minus #200 Wash C136 and 117/T27 and 11

    Hydrometer

    Lightweight Particles

    Los Angeles Abrasion C131/T96

    Micro-Deval Abrasion

    Minus #200 Wash C117/T11

    Moisture Content C566 T255

    AGGREGATE AND ROCK TESTS

    Organic Impurities C40/T21

    Potential Alkali Reactivity (Mortar Bar Method) C1260

    Potential Alkali Reactivity (Mortar Bar Method)-Combinations of cementitious materials and aggregate C1567

    FAA Modified ASTM C1260 FAA Modified ASTM C1567

    Relative Density (maximum/minimum; wet or dry method)

    Riprap Wetting/Drying (ASTM D5313)

    Riprap Freezing/Thawing (ASTM D5312), 35 cycles

    R-Value D2844/T190

    Sand Equivalency D2419/T176

    Sodium/Magnesium Sulfate Soundness (per procedure grading) C88

    Specific Gravity and Absorption C127 and 128/T85 and 84

    Compressive Strength of Rock Cores (ASTM D7012)

    Moisture Content (Wood, laboratory) - Direct

    Fireproofing/Density (ASTM E605)

    MISCELLANEOUS TESTS

    2015 Laboratory Tests.xls

    7108 South Alton Way, Building B • Centennial, Colorado 80112 • www.cesareinc.com

    Phone 303-220-0300 • Fax 303-220-0442 Page 4 of 4