1 Product & Technology Quality Excellence Support American Global Products Product & Technology TeSysPort Ethernet Interface for TeSys June 5, 2007

1

Product & Technology Quality • Excellence • Support

American Global Products

Product & Technology

TeSysPortTeSysPortEthernet Interface for TeSysEthernet Interface for TeSysJune 5, 2007June 5, 2007

2



TeSysPort Technical Presentation

Introduction

Product Description

Connectivity and Application

Q & A

E

B

C

A

D Features, Advantages, Benefits

Out of the box Installation

F

3



Product Description

TeSysPort is the Ethernet interface for the TeSys product line

It supports any TeSys U or TeSys T controller equipped with a Modbus communication module

The TeSysPort acts as an adaptor between a single TeSys Modbus/RTU (RS-485) device and an Ethernet Modbus/TCP device.

Introduction

Modbus/TCPClient

Switch

TeSysPort

Modbus Server

4



Product Positioning Low cost Ethernet interface for Modbus enabled motor starters and

controllers

Key customer Benefits Adds Ethernet functionality with minimal investment

Minimal disruption to the existing installation during commissioning

Provides remote monitoring of TeSys from multiple locations

Employs existing software programs and protocols

Introduction

5




Introduction

Product Description


Q & A

E

B

C

A



F

6



1 Model name TCSEQM113M13M

2 LED display Visual verification of TeSysPort’s operating status

3 RJ-45 modular jackCommunications connection to TeSysPort’s RS-

485 port

4 RJ-45 modular jack Connection to TCP/IP over Ethernet cable

5 Power terminalPower input using 3-position open style connector,

included in package

6 DIN rail connector Din rail mounting device

Product Description

7



Meaning Pattern Indication RS485 active

ON OFF

Serial activity No serial activity

Module Status

ON OFF Blink: 4 Blink: 5 Blink: 6 Blink: 7

Normal condition Abnormal condition Duplicate IP address Attempting to get IP address using BootP Default IP condition Kernel Mode

Ethernet Link

ON OFF

Link is active Link is not active

Speed

ON OFF

100Mbit/s 10 Mbit/s

Ethernet activity

ON OFF

Ethernet active Ethernet not active

Product Description

SER ACT

STATUS

LINK

100 MB

ETH ACT

LEDs

8



TeSysPort Dimensions

TeSysPort Power Connector

*Connector included

In TeSysPort

packaging


9




Introduction

Product Description


Q & A

E

B

C

A



F

10



TeSys Products Supported

TeSys U

Power base Modbus comm. port Ethernet client

LUB..

LU2B..

LUTM..

Multifunctional Control Unit

LUCM..

LUCMT..

Configuration & Diagnostics:

PC, PowerSuite 2.4

Modbus communication

modules

LULC032

LULC033

Control & Command:

PLC, PC

TeSys T

Controller ref. Modbus comm. port Ethernet client

LTMR..

(All networks)HMI Port

Configuration & Diagnostics:

PC, PowerSuite 2.5

LTMR..M..

(Modbus)Network Port

Control & Command:

PLC, PC

TeSysPort Connectivity

11



TeSysPort Application

24 VDC

Power Supply

Low pass filter

TeSysPort

TeSysPort

TeSysPort

Ethernet Switch

PLC

HMI

TeSys U

TeSys T

TeSys U

Modbus module

Multifunction module

Main

MODBUS SL ETHERNET

12



TeSysPort iMCC Installation

TeSysPort Application

13




Introduction

Product Description


Q & A

E

B

C

A



F

14




Product Installation Features

DIN rail mountable Uses standard industrial 24Vdc power Compact size ideal for enclosures

Advantages Fully compatible with existing TeSys applications

Customer Benefits Low cost of implementation and ownership

15




Feature Advantage Customer Benefit

Standard Schneider RS485 pin out

Consistent with all other Schneider products installed

No custom cabling required

Simple configuration Only Ethernet side needs to be configured. The default Modbus parameters match the default parameters on TeSys modules.

Quick start up, minimal down-time

Supports Auto-crossing (MDI/MDI-X) and auto-polarity on the Ethernet side

Ease of installation by detecting straight vs. crossover cables Safely accepts custom made cables

Tolerant to wiring mistakes, facilitates installationThe TeSysPort will communicate 10/100MB without prior configuration

Support 10/100Mbps and full/half duplex auto-negotiation

The TeSysPort will communicate 10/100MB without prior configuration

Ease of selecting devices and configuration

Product Installation

16




Functionality Features

Supports up to 6 connections (HMI, SCADA, PLCs, etc) through Ethernet

Advantages A single TeSysPort enables the use of multiple monitoring sites Real Time, remote monitoring of equipment status

Customer Benefits Flexibility on how to monitor and control TeSys Eliminates the need to conduct frequent on-site monitoring visits

17



Functionality


Open Modbus/TCP protocol Compatible with 3rd party devices

Flexibility in selection of component suppliers or platforms

PowerSuite compatibility Employs existing TeSys software for remote monitoring and configuring

No additional software investment required

Employs standard protocols such as Telnet, FTP, BootP

Avoids proprietary protocols existing in competing devices

No new software or programming required

Supports Ethernet-II and 802.3 Ethernet frame types

Compatible with most devices in the marketplace

Flexibility in implementation, allowing multiple platforms and suppliers.


18




Product Connectivity Features

I/O scanner compatibility Simple configuration

Advantages No PLC programming required Only Ethernet side needs to be configured.

The default Modbus parameters match the default Modbus parameter on TeSys modules.

Customer Benefits Quick integration into existing system Set configuration only once Quick start up, minimal down-time

19



Maintenance


Robust diagnostic indicators (LEDs)

Quick diagnostics, easy to debug

Quick detection of faults such as duplicate IP, BootP server not responding, etc

Field firmware upgradable On-site or remote servicing Minimizes down time

Access to diagnostic information through Telnet session

Remote monitoring of Ethernet and Serial port statistics

Easy access to diagnostics


20




Performance Features

Ethernet connectivity Advantages

Not dependent on number of stations on network

Customer Benefits Faster response times for larger

installations

Number of stations

Res

po

nse

tim

e (m

s)DeviceNet

Modbus SL

Profibus DP @ 500 Kbits/s

Modbus TCP with TeSysPort

Profibus DP @ 1.5Mbits/s

21




Value Features

Cost

Advantages Does not require purchasing of more complex, expensive

equipment

Customer Benefits Brings Ethernet functionality with minimal investment and disruption

to the existing installation

22




A

B

C

Introduction

Product Description


Features, Advantages, BenefitsD

E Out of the box Installation

F Q & A

23



Out of the Box Installation Using a 24vDC power supply power the TeSysPort

Configure your PC to be on the same subnet as the TeSysPort’s default IP address. Note - default IP address 85.16.MAC4.MAC5

Example MAC address 0080F401 2C71 Default IP address: 85.16.44.113

Connect the TeSysPort and the PC to a switch

Using your PC Telnet to the TeSysPort Using the default IP address 85.16.MAC4.MAC5 At that point you are able to change many of the default settings

– IP Address/Subnet Mask/Gateway– Serial Port Parameters

Connect TeSysPort to the Modbus device Start communication with the Modbus device

24



Out of the Box Installation IP address configuration

IP address has been changed from default IP and stored

25



Out of the Box Installation Serial Port Parameter

Ability to change serial port parameters through the serial configuration menu

26



Diagnostics Information

You can also connect via a Telnet session to the TeSysPort to View

Ethernet Statistics

Serial Statistics

27




A

B

C

Introduction

Product Description


Features, Advantages, BenefitsD

E Out of the box Installation

F Q & A

28



Questions?

Documents

1 Product & Technology Quality Excellence Support American Global Products Product & Technology TeSysPort Ethernet Interface for TeSys June 5, 2007