Taylor · copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY T-8600 4” Extended Angle Grinder (uses 4” depressed center grinding wheels) The T-8814EX is a heavy duty grinder designed

TaylorPneumatic Tool Company

IndustrialAir Tools

New Tools 2013

VOL. 18

WELCOME to our NEW TOOLS catalog for 2013

In our 20th year, TAYLOR PNEUMATIC TOOL COMPANY continues to keepa full inventory of tools, accessories and parts in-stock and will continue to renderthe customer service you have grown accustomed to - from prompt shipping tofollow-up. We stand behind our products.

It is a privilege to work with our Distributors and Sales representatives, many thathave worked with us for the past 40 years. We maintain that relationship by con-tinuing to provide superior service and quality products at competitive prices.

Thank you for your continued support.

Sincerely,Dave Taylor

Table of ContentsRivetersNeedle ScalersDrum Sanders4” Circular SawCone Grinder7” Vertical PolisherGrinders

Die GrindersAircraft Drill MotorPolisher3” Angle WaterPolisher3/8” Butterfly ImpactHammer/ScalerDie GrindersWarranty

10111112

13131415

Copyright 2013 All rights reservedTaylor Pneumatic Tool Company

The Taylors - Dave Jr., Brad, Jackie and Dave

2

3456789

Shipping: 505 N. Railroad Ave. Boynton Beach, FL 33435Mail: P.O. Box 1117 Boynton Beach, FL 33425

PH: 561-732-1111 Toll Free: 800-805-8665Fax: 561-731-4412 e-mail: [email protected]

www.taylorpneumatic.comemail orders to: [email protected]

T-3000C51C - 2-1/2”

Longeron

T-3000C51A - 1.5”

T-3000C51B - 3”

T-3000C51D - 4”

Used to squeeze a wide range of

sizes and types of rivets. The

T-3000C, T-3000A, T-6000C and

T-6000A’s are commonly used for

pressing, stamping and staking in

manufacturing industries ranging

from electronic components, boats,

aircraft, automotive assemblies,

trucks and buses.

Compression force is multiplied by

the unique cam and wedge design.

Throttle control allows ease of use.

Operation of the tool is quiet yet

gives great accuracy and productiv-

ity. T-6000 series tools give twice

the force of the T-3000 tools.

C-Type Single Cylinder

Rivet Squeezer

Squeezer w/2 Yokes

Longeron & 3”

C-Type Double Cylinder

Rivet Squeezer

1.5” Yoke

C-Type Double Cylinder

Rivet Squeezer

3” Yoke

A-Type Double Cylinder

Rivet Squeezer

1.5” Yoke

A-Type Single Cylinder

Rivet Squeezer

3” Yoke


Rivet Squeezer

1.5” Yoke


Rivet Squeezer

Longeron Yoke


Rivet Squeezer

3” Yoke


Rivet Squeezer

1-1/2” Yoke


Rivet Squeezer

3” Yokes

Rivet Squeezers

T-3000C

T-3000C15

T-3000CL

T-3000C3

T-3000A

T-3000A3

T-6000A3

T-6000A15

T-6000C3

T-6000C15

“C”

SQUEEZERS

“C”

SQUEEZERS

“A”

SQUEEZERS

“A”

SQUEEZERS

T-3000C T-6000C15 T-3000A3 T-6000A3T-3000A T-6000A15 T-3000C3 T-6000C3T-3000C15T-3000CL

RivetCapacity: ALUM: 1/8” 3/16” 3/32” 1/16”

STEEL: 3/32” 5/32” 1/16” 5/32”CompressionForce: 3000lbs. 6000lbs. 1800lbs. 4100lbs.Overall Length: 10-1/4” 14” 10-3/4” 13-1/2” Weight (lbs.): 4-1/2 5.5 4.5 6

BUILT-IN SWIVEL, QUALITY ALUMINUM CASTING AND ALLOY

STEEL YOKES

USES INDUSTRY STANDARD .187 (3/16”) SHANKSQUEEZE SETS AND DIMPLE DIES

www.taylorpneumatic.com copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY 3

NEWNEWT-7356V & T-7601V

Vacuum Ready Needle Scalers

www.taylorpneumatic.com copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY

Blows per min. 3,000 *Heat treated piston and barrel

# of Needles 19

Needle Diameter 3mm *Rubber grip

Length 10”

Weight 5.7 lbs. *Needles adjust to contours

Air Pressure 90 PSI Max.

Hose Size 3/8” ID *Heavy Duty

T-7356V

T-7601V

Needle Scaler Vacuum Ready

Pistol Grip Needle Scaler Vacuum Ready

Needle Diameter 3mm

# of needles 19 *Lever throttle

Bore & Stroke 1”X 1-1/8”

Blows per min. 4500 *Precision machined

Length 15” and hardened parts

Weight 6 lbs.

Air Pressure 90 PSI Max. *All steel construction

The T-7356 has many applications. *Needles adjust to

Chipping concrete and brick, contours

cleaning castings and paint, and

rust removal. Remove the needle

scaler attachment T-7356AT and add

the T-7356A8 chisel to use this tool

for scaling. (order chisels separately)

Both tools have the adjustable vacuum

shroud brush attachment. The shroud is

effective at trapping and removing coat-

ings, corrosion and other debris dis-

lodged by the needle scaler. These

scalers work on almost any surface

including irregular shapes such as tubing,

rivet heads, steel window sills, weld

seams, corner, edges, bearing mounts,

concrete and many others.

4

T-7716DP

T-7716DS

2500 RPM Drum Polisher


Drum Sanders and Polishers

4” X 4” Drum

4500 RPM Drum Sander

*All ball bearing

construction

*Side handle for

right or left hand

operation

*Built-in regulator

*Hardened and ground

spiral bevel gears

*1 HP motor

RPM 2500/4500

Spindle Size 1” keyed

Length 14”

Weight 6.35 lbs.

Air Inlet 1/4” NPT


This lightweight, rugged

1.0 horsepower sander/polisher is

excellent for producing a uniform surface

finish without leaving shadows or transi-

tion lines. The perfect tool for cleaning

welds, roughing, deburring, glazing,

brushing, blending, graining, polishing

and finishing.

NEWNEW

5

4” Circular Saw

*Adjustable depth and angle guide.

*Blade guard

*Safety throttle

*Uses blades rated above 8500 RPM

T-7722

RPM 8000

Blade Size 4”

Size 4” x 20mm X 0.80”

Weight 2.65 lbs.


Air inlet 1/4” NPT

Length 9-1/16”

(BLADE NOT INCLUDED)

NEWNEW

4” Circular Saw


The T-7722 provides the opportunity to use a circular saw in anenvironment too dangerous for electric tools. Use outdoors in wetconditions and on job sites near water. Cut fiberglass, wood, steel,aluminum, tile and concrete.

T-7722DB 4” Diamond

Blade - 8 teeth

T-7722CT 4”Carbide

Tipped Blade - 40 teeth

6

The T-8600 and T-8600CG are designed for maximum durability.

Governor prevents overspeed and maintains optimum RPM.

Heavy Duty ball bearing construction. Ergonomic design for

operator comfort. Safety Lock off lever prevents accidental

starts. High power to weight ratio.

Heavy Duty 6” Straight Grinder

T-8801REX

6” Straight Wheel Grinder - Cone & Plug Grinder - 4” Cutoff Tools and 4” Grinder

T-8814EX

T-8801R T-8801REX T-8814EX

RPM 15,000 15,000 11,000

Length 9.2” 14.8” 13.6”

Weight 2.4 lbs. 3.2 lbs. 2.7 lbs.

Air Pressure 90 PSI Max. 90 PSI 90 PSI

Air Inlet 1/4” NPT 1/4” NPT 1/4” NPT

Spindle Size 3/8-24 3/8-24 3/8-24

HP .9 .9 .5

T-8600 T-8600CG

RPM 6,900 6,900

Length 22.5” 21”

Weight 9.1 lbs. 8 lbs.

Air Pressure 90 PSI Max. 90 PSI

Air Inlet 1/4” NPT 1/4” NPT

Spindle Size 5/8-11 5/8-11

HP 1.4 1.4

4” Reversible Angle Cutoff Tool

(uses our T-9801341 4”Cutoff Wheel)

same great tool as the T-8801REX, but with short reach

T-8801R

OPTIONAL SIDE HANDLE-8801REX85 fits T-8801REX andT-8814RE Gives added stabilityto both tools.

8801REX85

The T-8801REX is a heavy duty 4” Cutoff tool designed with extra reach and

the special feature of being able to reverse the tool and change the direction

of the stream of sparks when cutting. Helps to minimize contamination.


T-8600

4” Extended Angle Grinder

(uses 4” depressed center

grinding wheels)

The T-8814EX is a heavy duty grinder designed for production

grinding in foundries, shipyards, fabrication shops and any

application that requires a powerful lightweight grinder.

T-8600CG Heavy Duty Cone & Plug Grinder NEWNEW

4” Reversible Extended Angle Cutoff Tool

(uses our T-9801341 4”Cutoff Wheel)

7

T-8818P7” Vertical Polisher

2,500 RPM

OPTIONALT-74727 1/2” WoolPolishing Padfor the T-8816P,T-7716P and T-7718P.(sold separately)

OPTIONALT-7470A7” Rubber Back Up Padfor the T-8818/T-8818P,T-8816/T-8816P, T-7716/T-7716P & T-7718 type tools.

5/8-11 Female thread

6600 RPM Max.(sold separately)

RPM 2500 Pad Size 7” Length 5-1/2” Weight 2.6 lbs.Air Pressure 90 PSI Max.Spindle Thrd 3/8 - 24

COMES WITH ADAPTER TO CONVERTTO 5/8 - 11 MALE THREAD. ADAPTERALSO HAS 5/16 - 24 FEMALE THREAD.

RPM is 2500, the perfect polish-ing speed. Comes complete witha plastic backup pad, pad nutand wrench. A great tool for buff-ing and polishing paint, plastic,metal and wood. Can be usedwith brushes to clean automo-tive carpets.


*Auxilliary handle fits right andleft side

*All Ball bearing construction

*Lightweight aluminum housing

*Exhaust muffler through handle

*Plenty of power - double reduc-tion gear system

7” Vertical Polisher

NEWNEW

8

Grinders 7” & 9”1.9 HP , 2HP & 2.5 HP

7” Angle Grinder

T-9707

T-97099” Angle Grinder

The T-9709 & T-9707 are Super Duty

grinders designed for production grinding

in foundries, shipyards, fabrication shops

and any application that requires a

powerful lightweight grinder.

Built in governor to prevent overspeed.

*2HP & 1.9HP motors provide

fast efficient grinding in tight

spots

*Hardened spiral bevel gear

in angle head for long life

and low vibration

*Lockoff lever standard

*Uses type 27 grinding wheels

(not included)

*Built in governor prevents

overspeed

The T-8707 has a push button safety lock

off lever, variable direction exhaust, built-

in governor to maintain constant speed

and a quiet and powerful 2 HP motor.

T-9709 T-9707 T-8707

Free Speed RPM 5,900 7,700 8,500

Wheel Size 9” 7” 7”

Spindle Size 1/2-16 5/8-11 5/8-11

Weight 9.7 lbs. 7 lbs. 6.6 lbs.

Air Pressure 90 PSI Max. 90 90

HP 2.5 1.9 2

2.5HP

1.9HP

NEW

T-87077” Angle Grinder

2HP

www.taylorpneumatic.com copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY 9

Front Exhaust ? - Rear Exhaust ?Now you can choose. If your workneeds to be blown off for bettervisibility use the front exhaust. Ifyou are working in a confined areaand the exhaust and grindings mayblow back at you, use the rearexhaust tools. R = REAR EXHAUST


NEW

NEW

1/4” Super Duty Die Grinders

T-9758R

T-9758

T-9757

T-9757R

T-9755R

T-9755

T-9759

T-9759R

.33 HP

.33 H

P

.6 HP

.9 HPCOLLETS

1/4” 1/8”

T-7504 T-7508

(OPTIONAL)

Fits all die grinders shown.

T-9758/ R T-9759/ R T-9757/ R T-9755/ R

RPM 25,000 25,000 20,000 18,000 Collet Size 1/4” 1/4” 1/4” 1/4” Length 5-1/4”, 6” 5-1/2” , 6-1/4” 6-1/4”, 7” 6-3/4”, 7-1/4” Weight .8 lb. .9 lb. 1.32 lb. 1.5 lb. Air Pressure 90 PSI Max. 90 90 90 Air Inlet 1/4” NPT 1/4” 1/4” 1/4”

NEW

NEW

These exceptional DieGrinders have hardened endplates and rotors and are builtto exacting standards and tol-erances. All ball bearing con-stuction, built-in regultors,and safety levers standard.

10

T-9750-C 1/8” Drill Chuck, Key and Adapter- Fits any 1/4-28 threaded spindle with theuse of our adapter from tapered shaft(inside chuck) to 1/4-28 thread.

1/4-28 Aircraft Drill Motors & Polisher


T-9850

T-9890

T-9870

1/4-28 Aircraft DrillMotor

1/4-28 Aircraft DrillMotor & 1/4” Collet

5/16-24 Threaded Collet AircraftDrill Motor & 1/4” Collet

Use as a Buffer, Grinder or DrillOptional755338 3” Pad PSA755338V 3” Pad Velcro755344 3-1/2” Polishing Pad

The TAYLOR 1/4-28 &

5/16-24 Drill Motors shown

here give a wide range of use

for tight spots encountered

in aircraft manufacturing and

any type of production

drilling or buffing situation.

Quarter shown forsize comparison

Quality Air Tools -Affordable Prices

Model RPM Thread size HP Length Weight Air Inlet Air PressureT-9850 3,000 1/4-28 .6 9.75” 2.10 lbs 1/4”NPT 90 PSI max.T-9870 3,000 1/4-28 .6 9.75” 2.10 lbs 1/4”NPT 90 PSI max.T-9890 3,000 5/16-24 .6 9.75” 2.10 lbs 1/4”NPT 90 PSI max.

11

3” Angle WaterPolisher

T-9913WS

The T-9913WS is top of the line Air Polisher for Fabricators.Designed for continuous production use with maximumperformance in Stone Shops. A very durable tool whenused in adverse conditions just remember to oil the toolthrough the air inlet and run for a secound or two to coat allinternal parts after use. Centrally fed water distribution pro-vides quality finishes.

Comes complete with 3” velcro pad, air hose, water feedhose with valve, splash guard side handle and wrench.

T-9913WS 3” Angle

Water Polisher

T-9913WS

RPM 4500 Spindle Size 5/8”-11 Length 9.06” Weight 4 lbs. Air Inlet 1/4” NPT Air Pressure 90 PSI Max.

www.taylorpneumatic.com copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY12

3/8” ButterflyImpact Wrench

Our T-7720N features a 360 degree swivelregulator. Its lightweight and compact sizelets you reach the tightest areas.

T-7720N T-9920

3/8” Butterfly Impact Wrenches

Super Duty 3/8”Butterfly Impact Wrench

*Paddle style forward and reverse levers

*Built-in regulators

*Ring type socket retainers

*Swinging weight clutches

The T-9920 is great for all types ofassembly operations. 175 ft.lbs. oftorque provides plenty of power forthe toughest jobs.

T-7605

Hammer/Scaler


NEW

NEWNEW

NEW

The T-7605 Single Piston Hammer/Scaler is used to pro-duce a hard hitting vibratory action to remove concrete,old paint, rust and scale in fabrication shops, construc-tion applications, shipyards and for maintenance.Use 1/2” hose.

Single Head Hammer/Scaler

T-7720N T-9920Bolt Capacity 3/8” 3/8”Square Drive 3/8” 3/8”Max. Torque 125 ft.lbs. 175 ft.lbs.Length 6-1/4” 6-3/4”Weight 2 lbs. 2-1/2 lbs.Air Inlet 1/4” NPT 1/4” NPTAir Pressure 90 PSI Max. 90 PSI Max.

T-7605Piston Bore - 30 x 24 x 75 MMPiston - 30 x 24 x 80 MMLength - 480 MMWeight - 4.18 lbs.Air Inlet - 3/8” NPT

13

Heavy Duty 1/4” Extended 20” Die GrinderHeavy Duty All Steel 1/4” Die GrinderHeavy Duty Low Speed 1/4” Die GrinderHeavy Duty 1/4” Reversible Die Grinder

T-9958

T-9901RN

T-8857RE

T-8857RE T-9958 T-9901RN T-8957RRPM 22,000 24,000 3,800 18,000Collet Size 1/4” 1/4” 1/4” 1/4”Weight 3.8 lbs. 1.8 lbs. 2.lbs. 1.6 lbs.Overall Length 25.25” 7-1/4” 8’ 7-1/2”Air Inlet 1/4”NPT 1/4”NPT 1/4”NPT 1/4”NPTAir Pressure 90 PSI Max. 90 PSI Max 90 PSI Max 90 PSI MaxHP .9 .4 .9 .9

The T-9958 is an all steel bodied1/4” Precision Die Grinder. It has aside exhaust and easy to use safetylever. Built for the roughest use.Collet is one piece.

ALLNEWALLNEW

www.taylorpneumatic.com copyright 20123 TAYLOR PNEUMATIC TOOL COMPANY14

The T-9901RN features a low 3,800 RPM,easy to use safety lock off lever, sure griprubber handle cover and plenty of power.

T-8957R 1/4” Reversible Die Grinder

The T-8857RE is a Heavy DutyExtended Die Grinder. 20’ lengthgets into the really tight spotsand the .9 horsepower motorprovides all the power you need.Collet provides maximun grip-ping strength due to both endsof the collet being slotted.

LIMITED LIFETIME WARRANTYMost products of Taylor Pneumatic are warranted to be free from defects in material and workmanship for the life of the tool.

This warranty applies to the original purchaser only. This warranty does not cover tools that have been abused, misused, modi-fied, not properly lubricated or to normal wear and tear. Taylor Pneumatic will at its option repair or replace the defective product

free of charge except for shipping. Taylor Pneumatics sole liability and your exclusive remedy under this warranty is limited tothe repair or replacement of the defective product. There are no other warranties expressed or implied and Taylor Pneumatic

shall not be liable for incidental, consequential, or special damages, expenses or costs except as described above. WARRANTYVOID IF TOOL IS DISASSEMBLED. Warranty limited to 90 days on - T-2010, T-3010, T-7007N,

T-7015N, T-7618, T-7737R, T-7756, T-DA90, T-SP90.

WHEN OPERATING PNEUMATIC TOOLS IT IS OF THE UTMOST IMPORTANCE TO THINK SAFTEYFIRST. DISCONNECT TOOLS FROM THE AIR SUPPLY WHEN CHANGING ACCESSORIES, OILINGOR WHEN THE TOOL IS NOT IN USE. DIRECT EXHAUST AWAY FROM YOURSELF AND OTHERS.USE EYE PROTECTION. USE HEARING PROTECTION WHEN TOOLS ARE BEING USED FOR EX-TENDED PERIODS. USE 90 PSI MAX AT THE TOOL. PUTTING A FEW DROPS OF AIR TOOL OIL INTHE TOOL AND RUNNING FOR A FEW SECONDS AT THE END OF A DAY WILL HELP PROTECTINTERNAL PARTS. FOLLOW ALL OPERATING INSTRUCTIONS AND OPERATE TOOL IN ACCOR-DANCE WITH THE ANSI B186.1 SAFE OPERATING CODE.ALWAYS USE IMPACT SOCKETS. USEACCESSORIES RATED FOR THE PROPER RPM. KEEP YOUR TOOLS CLEAN - GRINDING DUST

AND DIRT WILL DAMAGE BEARINGS AND INTERNAL PARTS. WHEN A TOOL IS EQUIPPED WITHA GUARD, THAT GUARD SHOULD REMAIN ON THE TOOL. IT IS PROVIDED FOR USER SAFETYAND REMOVING IT MAY BE DANGEROUS. SYNTHETIC LUBRICANTS MAY CAUSE DETERIORA-TION OF SEALS AND O-RINGS AND SHOULD NOT BE USED. ALL AIR SHOULD BE CLEAN AND

DRY.

copyright 2013 Taylor Pneumatic Tool Company www.taylorpneumatic.com [email protected] 800-805-8665 Boynton Beach, FL 33435all rights reserved

15

Copyright 2013

Taylor Pneumatic Tool Company

IndustrialAir Tools

New Tools 2013

VOL. 18

Documents

Taylor · copyright 2013 TAYLOR PNEUMATIC TOOL COMPANY T-8600 4” Extended Angle Grinder (uses 4” depressed center grinding wheels) The T-8814EX is a heavy duty grinder designed