Upload
khangminh22
View
3
Download
0
Embed Size (px)
Citation preview
VisionKV Controls vision - to be the preferred Control & Isolation valve supplier, Global leader in offering superior valve solutions
Mission• Adding value• Business with Integrity • Know-How• Quality Products• Superior After Sales Service• Total Cost of Ownership• World class prompt service
“Proud to Serve”
PB- Series Pump Recirculation
valves
INDEX
6 Butterfly Valves- Concentric
7 Triple Eccentric Butterfly Valves
8 Floating Ball valves
9 Trunnion Mounted ball valves
11
Ceramic Ball Valves
Lined Ball valves 10
Knife Gate Valves
12, 13 Gate, Globe, Check Valves 12
14, 15 Forged Steel Gate, Globe,
Check Valves
16 Valves for Cryogenic service
17 Plug Valves
18 Pinch Valves
19 Safety Valves
4
ARC Pump Protection Valve
• Product Range
Sizes DN: DN40 –DN300Pressure Rating PN: PN100 –PN250,ANSI 600, 900, 1500IConnection: Flanged RF,RTJTemperature °C: ‐29‐200Body Material: (1) A105 (2) F304 (3)F316SAF 2205
PBH-Series
PBL-Series• Product Range
Sizes DN: DN25 –DN500Pressure Rating PN: 10 –PN40 ,ANSI 150, 300,Connection: Flanged RF, Temperature °C: ‐29‐ 200Body Material: (1) WCB (2) CF8 (3) CF8M(4) CF3M (5) SAF 2205
• Design Features
• Automatic Multiple stage pressure
reduction back to suction pressure
• Prevents centrifugal pumps from
flashing/cavitation with integral check
valve in bypass.
• Prevents Water Hammer in the event
of sudden flow changes
• Check Valve -prevents reverse flow
and positions the bypass for open,
closed or modulating flow by
detecting the process flow demand
• Characterized orifices in the bypass
element provides accurate
modulated recirculation flow.
• Prevents centrifugal pumps from
flashing/cavitation.
• Prevents Water Hammer in the event
of sudden flow changes
• Check Valve -prevents reverse flow
and positions the bypass for open,
closed or modulating flow by detecting
the process flow demand
• Design Features
Principle of Operation of a PBL –ARC Valve
ARC Recirculation VALVE
4
9
Automatic RecirculationValve Technical Data
Customer:
Enquiryno.:
Prior reference:
Orderno.:
Project:
Datasheet:
Quantity:
Automatic Recirculation Valve type:
Valveinlet [in.]
Valveoutlet [in.]
Bypassoutlet
[in.] Start-up [in.]
class
Acc.
:
class Installation:vertical horizontal
class
Paint
:
class Start-upabove below checkvalve
Mat.-/test
certificate
Materials
Housing:
s:
Internals: Seals:
Medium
S.G.[kg/m³]:
Operating temp.[°C]
:
Design temp.[°C]:
H0
= m
QM
=
Q100
=
Qmax
=
QA
=
m3/h HM
=
m3/h H100
=
m3/h HQmax
=
m3/h HA
=
m Suction pr.pv
m Differential pr. (p1-p
n)
m BackpresspN
m BackpresspA
bar/g
bar
bar/
g
bar/
g
Notes
:Revision Date Description Name Signature
ARC VALVE Data Sheet
5
Resilient Seated Concentric Butterfly Valve
Resilient seated concentric butterfly valve is a device that allows,
obstructs and regulates a fluid to flow through, widely applied to
various industrial fluid controls. Compared to conventional globe and
ball valve, the butterfly valve has advantages of light weight and low
cost. With the rapid development of artificial rubber, the valve serves
not only traditional sector of water treatment, but also ship-building,
marine, food and modern chemical industry, etc. K V C resilient
seated concentric butterfly valve is designed with the concentricity in
conformity with API609.
Design Features:
Concentric design for the disc, shaft and body
Low torque
Optional bi-directional installation
Self-cleaning seat
Blow-out proof shaft
ISO 5211 top flange
Two-piece shaft
Optional extended shaft
Product Range:
Size:
Pressure Rating:
Body Material:
Sealing Material:
End Connection:
Operation:
2"~72" (DN50~DN1800)
232 PSI (PN6~PN16)
EPDM, NBR, PTFE, VITON
Wafer, Lug, Double Flange
Lever, Gear, Electric, Pneumatic
Gray Cast Iron, Ductile Cast Iron,
Cast Steel, Stainless Steel
PTFE/PFA Lined Butterfly Valve
KVC The lined butterfly valves bi-directional flow is possible
at maximum operating pressure. Since the valve port
corresponds to the piping diameter, a high flow capacity is
guaranteed.
Lining material: PTFE, PFA, FEP, GXPO etc.
Connection type: wafer, flange, lug etc.
Operation methods: manual, worm gear, electric,
Design Features: Product Range:
Body Material:
Soft-seat Material:
Trim Material:
Size: 2″~64″ (DN50~DN1600)
Pressure Rating: Class150 (PN16~PN100)
Carbon Steel, Stainless Steel,
PTFE, RPTFE, EPDM, NBR, VITON
End Connection: Wafer, Lug, Double Flange
PTFE/ PFA/ RPTFE,
BUTTERFLY VALVE
• Design. API 608
• SO 5211 mounting pad
• Bi-directional seal
• Eelastomer backings
• Disc fully lined by PTFE
6
Metal-seated Triple Offset Butterfly Valve
Triple offset butterfly valves or triple eccentric butterfly
valves, have three offsets. Two of these apply to the location of
the shaft in relation to the centre line of the bore and the centre
line of the seat sealing surfaces. The third offset is the design in
the axis of the seat cone angle
KVC/Linuo triple eccentric designed as per API609 and
features optional bi-directional shut-off, light weight and low
operating torque.
The working temperature
ranges from -196°C to 500°C, with different body materials
available. In multiple service conditions.
Design Features:
Triple offset and bi-directional seal design
Zero Seat leakage
Frictionless close
Blow-out proof shaft
ISO 5211 top flange
Optional extended stem
Optional hard-alloy seat
Optional -Integrated metal
seatProduct Range:
Size:
Pressure Rating:
Body Material:
End Connection: Wafer, Lug, Double Flange, Butt-welding
Operation: Gear, Electric, Pneumatic
Disc Sealing Material:
2″~48″ (DN50~DN1200)
Class150~900 (PN16~PN160)
Carbon Steel, Stainless Steel, AlloySteel, Duplex Steel
Multilayer Metal + Graphite,Metal + PTFE, Metal Seal Ring,
BUTTERTLY VALVE
Integrated Seat With Stellite Overlay
7
BUTTERFLY VALVE
●
Floating Ball ValveKVC/Linuo floating ball valves a r e designed according to
ISO 17292, API 608 and API 6D,
working at temperatures: -196~425°C
API 607 or API 6FA fire-safe certified..
Design Feature:
● Full bore or reduced bore
● Fire safe certification
● SIL 3
● Anti-blowout stem
● Anti-static device
● Bi-directional soft seal
● Bi-directional seal is alternative for metal-seated valves
● Cavity pressure self-relief
● ISO 5211 Top flange
● On-off positon indicator
● Locking device
● Optional fugitive emission design
Product Range:
Body Material: Carbon Steel, Stainless Steel, Nickel-based Alloy
Trim Material: Carbon Steel, Stainless Steel, Nickel-based Alloy
Operation: Handle, Gearbox, Pneumatic / Electric Actuator.
Valve Type Body Material Size Pressure Rating Advantage
One piece Cast Steel 1/2"~10" (DN15~DN250)Class 150~300
(PN16~PN40)
Reduced bore as standard design
of compact dimension and low cost
Two-piece
Cast Steel 1/2"~10" (DN15~DN250)Class 150~300
(PN16~PN40)
Standard design is full bore which
is economical
Forged Steel 1/2"~6" (DN15~DN150)Class 150~2500
(PN16~PN420)
Available for ≥Class 600 valvesOptional for high-pressure service Design for cryogenic applications
Three-piece Forged Steel 1/2"~2" (DN15~DN50)Class 150~2500
(PN16~PN420)Socket welded or threaded
Top entry Cast Steel 1/2"~4" (DN15~DN100)Class 150~1500
(PN16~PN250)On-line service available
Metal-seated
Cast Steel 1/2"~4" (DN15~DN100)Class 150~300
(PN16~PN40)
Excellent resistance againstabrasion and high temperature & low cost
Forged Steel 1/2"~8" (DN15~DN200)Class 150~2500
(PN16~PN420)
available for ≥Class 600 valves and
higher pressure service
DBB Ball Valve Forged Steel 1/2"~10" (DN15~DN250)Class 150~2500
(PN16~PN420)
Compact dimension and DBB
functionality
BALL VALVE
8
Operation:Handle, Gearbox, Pneumatic, Electric,
Pneumatic-hydraulic Actuator,
Electric-hydraulic Actuator.
Trunnion Mounted Ball ValveKVC/Linuo trunnion mounted ball valve is designed according to
ISO 17292, API 608 and API 6D, which operates at working
temperature: -196~425 °C. It is applicable for large-sized and
high- pressure piping and fluid flow control. API 607 or API 6FA
fire-safe certificates have been obtained for all the valves.
Design Feature:
●
● Full bore or reduced bore
● Fire safe certification
● Anti-blowout stem
● Anti-static device
DPE and cavity relief
●
●
●
Optional injection system for stem and seat
Cavity pressure self-relief
Standard ISO 5211 top flange design
Valve on-off position indicator
● Lock device
● Optional fugitive emission design
● Optional double piston seat
● Optional stem extension design for underground application
BALL VALVE
Valve Type Body Material Size Pressure Rating Advantage
Side Entry Cast steel 2"~24"(DN50~DN600)Class 150~1500
(PN16~PN250)Economic
Side Entry Forged steel 2"~60"(DN50~DN1500)Class 150~2500
(PN16~PN420)
Wide application
range and fast delivery
Top Entry Cast steel 2"~36"(DN50~DN900)Class 150~1500
(PN16~PN250)On-line maintenance available
Metal-seated
Forged steel 2"~36"(DN50~DN900)Class 150~2500
(PN16~PN420)
Suit for ambient temperature
and abrasion service
Forged steel 2"~30"(DN50~DN750)Class 150~1500
(PN16~PN250)
Impervious to abrasion
and high temperature
Fully Welded Forged steel 2"~60"(DN50~DN1500)Class 150~1500
(PN16~PN250)
No fugitive emission and
freedom from maintenance
DBB Ball Valve Forged steel 2"~24"(DN50~DN600)Class 150~2500
(PN16~PN420)
Compact dimension
and DBB functionality
9
Ceramic Ball Valve
This type of ceramic ball valve is KVC's first developed high-tech product
ceramic control ball valve, it has good abrasion character. We have
different ceramic materials pending the processes.
The process is not in contact with any metal parts, only the ceramics
selected. The ball assembly has also Zero cavity. The benefit is no
product gets trapped inside the valve while switching from open to close.
The ceramic material hardness (HRC88), which only inferior is a
diamond. The ceramic lined valve has a very high abrasion resistance,
corrosion resistance, erosion resistance, good insulation and small
thermal expansion
Design Features:
Zero Cavity Ball
Low torque
Optional bi-directional installation
Optimum Slurry valve
ISO 5211 top flange
Three Piece body
Full Bore
V-Ball Option for Control
Product Range:
Size:
Pressure Rating:
Body Material:
Trim Material:
End Connection:
Operation:
1/2"~12" (DN15~DN300)
232 PSI (PN6~PN16)
Ceramic , Aluminum Oxide, Zirconia,
Silicon Carbide
Double Flange
Lever, Gear, Electric, Pneumatic
Cast Steel, Stainless Steel
PTFE/PFA Lined Ball Valve
Two pieces full port standard lined ball valves offer high
stability, rigidity and eliminating potential leak path.
Full port design minimizes pressure losses and increases flow
capacities thus reducing energy and pumping costs.
It features zero leakage, maintenance-free, one-piece stem and
ball design, high sealing performance and can be used under
full vacuum service, molten alkali metals and fluorine
elements". It is ideal products used in chlor-alkali, industrial in
organic chemicals, metal and mining, nitrogen and phosphatic
fertilizers, petroleum refining, pharmaceutical etc.
Design Features:
Product Range:
Body Material:
Soft-seat Material:
Trim Material:
Size: 1/2″~10″ (DN15~DN250)
Pressure Rating: Class150 (PN16)
Carbon Steel, Stainless Steel,
PTFE, RPTFE, EPDM, NBR, VITON
End Connection: Double Flange
PTFE/ PFA/ RPTFE,
BALL VALVE
• Design: Bi-Directional tightness
• Full Bore design
• Dove Tail connection with body
• Ball fully lined by PTFE
10
DQ/DC/DT Knife Gate Valve
Linuo knife gate valves are linear shut off valves that are light weight with
compact construction. Valves are available as manual with handwheel
or can be automated with pneumatic cylinder actuator for remote
operation. The arc shape of the gate of our knife gate valve is designed
to be particularly suitable for cutting off fluid containing fiber or
suspended particles,.
DK Slurry Knife Gate Valve
Linuo DK series knife gate valves are soft sealing linear shut off
valves that are light weight with compact construction and
convenient to install and these Valves are full port in design .
Resilient and abrasion resistant rubber seat are die cast in a
unique rubber mould and have a metal support ring to extend the
life of the valves. Seat material options are NBA, EPDM and
Natural Rubber.
Design Features:
Seats in the Linuo knife gate valves are backed with by an O-ring
to give the seat a self-compensating wear function.
Change the seats is easy and fast
Packing can be adjusted or replaced without removing the valve
from the pipeline..
●
●
●
Design Features:
● No Pipe restrictions when fully open
● Replaceable seats
● Packing can be replaced in line
● Cavity pressure self-relief
Type: Knife Gate Valve/ Through Knife Gate
Size: 2"~48" (DN50~1200)
Pressure Rating: Class 150 (PN10~PN16)
Carbon Steel,Body Material:
Stainless Steel Alloy Steel
Trim Material: Stainless steel,
Special Alloy
Operation: Hand Wheel, Gear Box,
Electric and Pneumatic Actuator
End Connection: Wafer /Lugged
Size: 2~32 inch (DN50~800)
Pressure Rating: Class 150~300 (PN10~PN..25)
Body Material: Carbon Steel, Stainless Steel
Trim Material: EPDM, NBR
Operation: Hand Wheel, Gear Box,
Electric and Pneumatic Actuator
End Connection: Wafer Lugged
Product Range:
Product Range:
KNIFE GATE VALVE
11
Pressure Seal Valve
KVC pressure-seal valve is design and manufactured in accordance
with API 600,working in high temperature and high pressure cond-
itions. It serves a wide range of demanding applications, such as
nuclear power plant. Characterized by simple structure and better
rigidity, it is competitive in maintenance costs, providing reliable
body-bonnet seal.
Full-bore Pipeline Valve
K V C full-bore pipeline Through conduit gate valve is
designed to serve long transportation of crude oil and natural
gas.
Satisfying API 6D requirements, it functions as double-block-
and-bleed (DBB) valves, used for bi-directional shut-off. Single
slab gate and expanding through conduit slab gate valve are
avallbale for option as per service condition.
Design Features:
Hard alloy for seating surface
Flexible wedge
Guide design for full stroke
Leakage prevention at the valve body in contact with bonnet
Optional by●-pass valve design
●
●
●
●
Design Features:
● Fire-safe design
● Optional single or double slab wedge
● DBB
● Cavity pressure self-relief
● Emergency sealant injection for leakage avoiding
Type: Gate, Globe, Check
Size: 2"~40" (DN50~1000)
Pressure Rating: Class 600~2500 (PN100~PN420)
Carbon Steel,Body Material:
Stainless Steel Alloy Steel
Trim Material: Based on API 600
Operation:Hand Wheel, Gear Box,
Electric and Pneumatic Actuator
End Connection: Butted-welding
For more technical details, please refer to catalogue: E-GGC
Size: 2~60 inch (DN50~1500)
Pressure Rating: Class 150~2500 (PN16~PN420)
Body Material: Carbon Steel, Stainless Steel
Trim Material: Soft Seat, Metal Seat
Operation: Hand Wheel, Gear Box,
Electric and Pneumatic Actuator
End Connection: Flange, BW, RTJ
For more technical details, please refer to catalogue: E-GGC
Product Range:
Product Range:
GATE,GLOBE,CHECK VALVE
12
KVC full opening check valve is designed according to API 6D,
applied in crude oil and natural gas pipeline to prevent service medium
backflow. Full opening allows pigging ball to flow though, convenient to
maintain the pipeline. For large-sized valve, buffer damper can be acce-
ssible to delay disc closing time for seating surface protection. Both
soft-seat and metal-seat types are available.
Full Opening Check Valve
Design Features:
● Swing disc design
● Applicable for pigging ball
● Optional soft-seat and metal-seat structure
● Welded or threaded seat
● Alternative hammer damping device
Product Range:
Size: 2"~50" (DN50~DN1250)
Pressure Rating: Class 150~2500 (PN16~PN420)
Body Material: Carbon Steel, Stainless Steel
End Connection: Flange, BW, RTJ
Size: 2-64"(DN50~DN1600)
Pressure Rating: Class 150~2500 (PN16~PN420)
Body Material: Carbon Steel, Stainless Steel, Alloy Steel
End Connection:
Design Features:
● Dual-slab
● Compact and low-weight design
● Disc with dynamically loaded spring
● Optional soft-seat or metal-seat structure
Flange, Wafer, Lug, BW
Product Range:
Compared with those of traditional flange-connection,
it is simple in configuration, shorter in face-to-face
dimension and convenient in installation and maintenance.
The valve in butterfly pattern is designed in accordance
with API 594, with single and dual slab available and
various materials selectable.
Dual-plate Check Valve
GATE,GLOBE,CHECK VALVE
13
Type: Gate, Globe and Check Valves
Size: 1/2"~2" (DN15~DN50)
Pressure Rating: Class 150~2500
Body MaterialCarbon Steel, Stainless Steel,
Duplex Steel and Alloy Steel
End Connection: Flanged, SW, Threaded, BW
API 602 Forged Steel Valve
Forged valves, including gate, globe and check valves, comply with
API 602. KVC provides forged gate and globe valves, with standard
bolted bonnet, special welded bonnet valves or bellows seal. Besides,
weld-overlay hard alloy on seating surface is standard design.
Forged Steel Pressure-seal Valve
Design Features:
● Hard alloy overlaid on seating surface
● Solid wedge
● Solid wedge design
● Bolted or welded bonnet
● Full bore and reduced bore
● Optional bellows sealed gate and globe valves
● Cone or needle disc globe valves
● Lifting or swing check valves
Type: Gate, Globe and Check Valves
Size: 1/2"~2" (DN15~DN50)
Pressure Rating: CLASS 900~2500 (PN150~PN420)
Body Material:Carbon Steel, Cr-Mo Alloy Steel and
Austenitic Steel
Trim Material: According to API 600
Operation: Hand Wheel, Electric Actuator, Gearbox
End Connection: Flanged End, BW, RTJ
● Full-stroke guide
● No leakage for body-bonnet connection
● Optional bypass valves: Y-type globe and check valves
Product Range:
Design Features:
Forged steel pressure-seal valves, broadly used in nuclear and
petro-chemical power plants, can serve harsh conditions such as
high pressure and high temperature, designed according to ASTM
B16.34. Compared with bolted-bonnet valves, it features succinct
appearance, superior rigidity and low cost of maintenance, more
reliable in body-bonnet sealing.
Product Range:
●
FORGED STEEL GATE,GLOBE AND CHECK VALVE
14
Forged Steel Bellows Seal Valve
Leakage around t h e stuffing box of valve bonnets remains
a long-standing trouble for environmental protection. It is
also rather dangerous in case of highly hazardous service
fluids leakage. KVC bellows seal valve is of the construction
that bellows is welded o n t o bonnet and stem. The up-and-
down movement of stem drives expansion and contraction
of the bellows,sliminating the leaking possiblities during
slidling and rotation.
Formed bellows
Two secondary stem seals: bellows and packing
Zero leakage at stem
Design Features:
Product Range:
Pressure Rating:
Body Material:
End Connection
Type:
Size:
Bellows Material:
Gate, Globe
1/2"~2" (DN15~DN50)
CLASS 150~1500 (PN16~PN260)
Carbon Steel, Stainless Steel,Alloy Steel,Duplex Steel
Stainless Steel,Inconel Steel,Hastelloy Steel
Flanged SW, BW, RTJ
Forged Steel Valve for Cryogenic
Applications
The valves working below -110°C are normally defined as
cryogenic valves, which are extensively found in LNG and
other low-temperature industries. KVC can manufacture
gate,globe and check valves serving the temperature up to
-196°C.
Design Features:
Extended bonnet and stem for safety
Relief hole to the upstream side for avoiding cavity pressure rise
Keep sealing performance at low temperature by using
low-leakage packing
Product Range:
Pressure Rating:
Body Material:
End Connection
Type:
Size:
Gate, Globe And Check Valves
1/2"~2" (DN15~DN50)
CLASS 150~1500 (PN16~PN260)
Austenitic Steel
Flanged SW, BW and RTJ
FORGED STEEL GATE,GLOBE AND CHECK VALVE
15
Product Range:
Size: 1/2"~24" (DN15~DN600)
Pressure Rating: ASME CLASS 150~2500 (PN20~PN420)
Body Material:CF3M / CF3 / CF8M / CF8 / Dual Certified
(F316L / F304L / F316 / F304)
End Connection: BW. RF. SW.
Temperature Range: -196°C ~ 400°C
Operation: Manual / Pneumatic / Hydraulic
Structure: Rising Stem
Cryogenic Globe Valve
Design Features:
● PCTFE shaft sleeve at the middle of stem to keep stem stable
● Extended backseat to secure cavity
● To improve the service life, the seal surface is made of hard alloy by weld overlay
● Extended stuffing box to protect packing effectively
● Drip plate prevents condensate from flowing into insulation
VALVES FOR CRYOGENIC SERVICE
Cryogenic Check Valve
(Swing Check Valve)
Design Features:
● Ball-like pin could achieve self-alignment, which makes it easier toseal at low temperature
Size: 1/2"~36" (DN15~DN1050)
Pressure Rating: ASME CLASS 150~2500 (PN20~PN420)
Body Material:CF3M / CF3 / CF8M / CF8 / Dual Certified
(F316L / F304L / F316 / F304)
End Connection: BW. RF. SW.
Temperature Range: -196°C ~ 400°C
Structure: Swing
● Ensure the optimal flow design & the maximum flow capacity by fluid analysis software calculation
● Metal-seat structure, with sealing surface subject to hard-alloy weld overlay, which performs well in scouring & particle resistance andimproves service life
● Dedicated accurate and match grinding to guarantee the sealing performance in low temperature
Product Range:
16
Plug Valves
Product Range:
Size: 1/2"~24" (DN15~DN600)
Pressure Rating: ASME CLASS 150~600 (PN20~PN100)
Body Material:CF3M / CF3 / CF8M / CF8 / Dual Certified
(F316L / F304L / F316 / F304)/ Titanium/ Monel
End Connection: BW. RF. SW.
Temperature Range: -196°C ~ 200°C
Operation: Manual / Pneumatic / Hydraulic
Structure: Rising Stem
Sleeved Plug Valve
Design Features:
● Full bore/reduce bore
● Soft sealing/metal sealing
● Packing box structure
● Anti erosion adjustable structure
● 2-Way/ 3-Way
● Double gland
● Trunnion design
Lined Plug Valve Design Features:
KVC fully lined plug valves are cavity-free due to the special body design,
the liner is firmly locked.
• Plug coating is extended over the shaft sealing
• The lining is molded into dovetail recesses in the body to lock them in
place to prevents liner collapse in vacuum conditions and blow out in
high pressure conditions.
• Top sealing components form the second sealing. When the sealing
surface failures to work, it prevents medium leaking through the valve
stem.
• Lined three-way plug valve is the best choice for corrosive diverter
valve application.
Size: 1/2"~10" (DN15~DN250)
Pressure Rating: ASME CLASS 150~300 (PN10~PN16)
Body Material:CF8M / CF8
(WCB
End Connection: . RF.
Temperature Range: -196°C ~ 200°C
Operation: Manual / Pneumatic / Hydraulic
Standards API 6D, Face to Face –Ansi B16.10
Product Range:
17
Pinch Valves
Product Range:
Size: 1"~12" (DN25~DN300)
Pressure Rating: PN10~PN25)
Body Material: Cast Iron/ WCB /CF8M
End Connection: RF
Temperature Range: 10°C ~ 90°C
Operation: Manual / Pneumatic / Hydraulic
Structure: Double Stem
Sleeved Pinch Valve
Design Features:
Diaphragm ValveDesign Features:
Rubber lined diaphragm valve is a kind of special form of isolation valve.
The diaphragm is made of EPDM rubber material, to separate the body and
driving parts and make the stem and disc above the diaphragm to avoid
contact with corrosion medium, hence, the packing sealing structure can be
omitted without causing medium leakage. The diaphragm is easy to
replace. The body is fully rubber lined to avoid the body from corrosion,
prolonging the life span.
Size: 1/2"~10" (DN15~DN250)
Pressure Rating: PN10~PN16
Body Material: Cast Iron
End Connection: . RF.
Temperature Range: 0°C ~ 90°C
Operation: Manual / Pneumatic / Hydraulic
Standards API Face to Face –Ansi B16.10
Product Range:
•Low & easy maintenance.
•Low weight.
•No clogging or dead spots.
•Compact, simple, robust & straight through design.
•Very fast opening/closing times.
•Less air consumption.
•Self cleaning.
•Permanent seal with tight shutoff.
The self- cleaning flexing action of the sleeve eliminates inline scaling and
blockages. All mechanical parts are completely isolated from the medium. The
valve has only five major components, making it easy to use, easy to maintain
and it is extremely fitter friendly. The valve is bi-directional and offers drop
tight shut off across the full pressure range.
18
Product Range:
Size: 1/2"~12" (DN15~DN300)
Pressure Rating: ASME CLASS 150~2600 (PN20~PN100)
Body Material:CF3M / CF3 / CF8M / CF8 / Dual Certified
(F316L / F304L / F316 / F304)
End Connection: RF,BW, Threaded. .
Temperature Range: -196°C ~ 400°C
Operation: Manual /
ASME & ISO standard Safety Valve
Design Features:
● American Standard
● API 526 Series
● Balanced Bellow
● Open Bonnet Spring Loaded Full Lift with Lever
● Full lift and Low lift
Safety Relief Valves
Pressure / Vacuum Relief
Valves
Design Features:
Size: 2"~12" (DN50~DN300)
Pressure Rating: ASME CLASS 150 (PN16)
Body Material:Aluminum, Carbon Steel, Stainless Steel, Fiberglass,
special materials upon request
End Connection: RF..
Temperature Range: -0°C ~ 180°C
Pressure Settings: 0.5 oz/in2 to 15psig (2.15mbarg to 1.03barg)
Vacuum Settings: 0.5 oz/in2 to 12psig (2.15mbarg to 506 mbarg)
Product Range:
The KVC Models 1200A, 1201B, 1202B and 1203A Pressure/Vacuum Relief Valves are designed to
protect your tank from damage created by overpressure or excessive vacuum. Costly product
evaporation losses due to normal tank “breathing” are greatly reduced. Because the 1200
Series products retain toxic vapors, atmospheric contamination is minimized which helps to
provide increased fire protection and safety.
19
www.kvcontrols.co.za
Tel: +27 16 100 4592
E-mail: [email protected]
■ South Africa ~KV Controls Group co.