AUTOMATION OF DUAL EXTRUDER HYDRAULIC POWER PACK (first review)

AUTOMATION OF DUAL EXTRUDER HYDRAULIC POWER PACK

AJAY P RAJ

PRINCE JOSE

HARI R

ATHULDEEP N

INTRODUCTION

• Every industries target to make their product with low cost.

• Lot of factors affect during production like labours, power, raw-materials etc.

• Tyre Extrusion is one of the process which consumes power very much.

• This project is a solution to reduce this excessive power consumption.

11/30/2014 2

3HP &5HP

11/30/2014 3

BLOCK DIAGRAM

11/30/2014 4

DUAL EXTRUDER

HYDRAULIC POWER

PACK

PLC (Programmable logic controller)

Natural Rubber Sheets

Thread

11/30/2014 5

CONTINUED…

• 2 motors are continuously working.(at present system with out PLC).

11/30/2014 6

• The clamp inside extruder is opened .(using motors).

• Threshold value of pressure is reached (manually checked).

• Die is taken out and remaining rubber is removed.

• Motors are manually switched off.

CONTINUED…

11/30/2014 7

• So with the aid of a PLC this can be done very easily.

• Manually this job is very time consuming .

• The threshold value is set on PLC and opening and closing

of clamp is also done by the control of PLC.

• Also adding an interactive display for the status of the system.

PLC (Programmable logic controller)

• Adding a PLC (Programmable logic controller) to DUAL EXTRUDER HYDRAULIC POWER PACK.

• Which will control the motors ON & OFF action.

• So the motors will only work for about 6 hrs.

• Reducing the energy consumtion.

• SIEMENS-S71200 PLC.

11/30/2014 8

SIEMENS-S71200 PLC

• The S7-1200 series is a line of programmable logic controllers (PLCs).

• Can control a variety of automation applications.

• Compact design.

• low cost, and a powerful instruction set.

• A perfect solution for controlling a wide variety of applications.

• Windows-based programming tool .

• Flexible to solve automation problems.

11/30/2014 9

CPU

Microprocessor

Integrated power supply

Input and output circuits

Built-in PROFINET (port for communication over a network)

High-speed motion control I/O

On-board analog inputs in a compact housing to create a powerful controller.

11/30/2014 10

11/30/2014 11

11/30/2014 12

SOFTWARE

11/30/2014 13

11/30/2014 14

11/30/2014 15

ADVANTAGES

• Wastage of power can be reduced to a great extent.

• PLCs are easily programmed and have an easily understood programming language.

• Less and simple wiring.

• Increased Reliability.

• More Flexibility.

• Lower Cost .

• Faster Response.

• Easier to troubleshoot.

• Remote control capability.

• Communication Capability.

• Handles much more complicated systems..

11/30/2014 16

THANK YOU…

11/30/2014 17