Squat Rack Plan

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 1/25

Squat rack plan - Free fitness equipment

plan

The measurements within this text and 2D documentation are given both in millimeters

and inches (in brackets). I apologize to the people who use other measurement units; but

I believe that measurements given in millimeters and inches should be adequate for

everyone who would like to build this project.

Use various tools and clamps in process of welding, so you could weld the itemstogether with accuracy.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 2/25

Squat rack subassembly list 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 3/25

Squat rack assembly drawing 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 4/25

1. STANDA SUBASSEMBLY 

Standa subassembly parts list 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 5/25

Stand subassembly drawing 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 6/25

Stand frame components 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 7/25

1.05 Cover 60 x 40mm 1.06 Bottom sheet

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 8/25

1.07 Weigh holder 1.09 Cover D25,4

2. CROSSBAR SUBASSEMBLY 

Crossbar subassembly parts list 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 9/25

Crossbar subassembly drawing 

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 10/25

2.01 Rectangular tubing 60 x 40 x 4mm 2.02 Sheet 120 x 40mm

Standard parts

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 11/25

3. WEIGH SET SUBASSEMBLY 

Weigh set subassembly parts list 

Weigh set subassembly drawing

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 12/25

3.01 Round Tubing D31_8 x 6.3mm 3.02 Delimiter

3.03 Dumbbell 7kg 3.04 Dumbbell 5kg

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 13/25

3.05 Dumbbell nut 3.06 Dumbbell 9kg

3.07 Dumbbell 3kb 3.08 Dumbbell 1,5kg

Assemblage Instruction

Stand Subassembly 

1. Before you start welding, you should drill the holes with diameter 10,5mm on the

following items: Rectangular Tubing 60x40x4mm, Cut Lenght 1138,45mm (item 1.02)and Rectangular Tubing 60x40x4mm, Cut Lenght 1287,55mm (item 1.04).

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 14/25

2. Weld the Cover 60x40mm (Part 5) to the Rectangular Tubing 60x40x4mm, CutLenght 1138,45mm (Part 2).

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 15/25

3. Weld the Weight Holder (Part 7) to the assembly made in the previous step.

4. Weld the Bottom Sheet (Part 6) to the Rectangular Tubing 60x40x4mm, Cut Lenght

588,45mm (Part 1).

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 16/25

5. Weld the subassembly made in step 2 to the subassembly from the previous step.

6. Weld the Bottom Sheet (Part 6) to the Rectangular Tubing 60x40x4mm, Cut Lenght1287,55mm

(Part 4).

7. Weld the subassembly from step 4 to the subassembly made in the previous step.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 17/25

8. Weld the Cover 60x40mm (Part 5) on the Rectangular Tubing 60x40x4mm, Cut

Lenght 1186,14mm (Part 3).

9. Weld the subassembly made in the previous step to the the subassembly made in step6.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 18/25

10. Weld the Weight Holder (Part 7) to the subassembly made in the previous step.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 19/25

11. Weld the Weight Holder (Part 7) to the subassembly made in the previous step.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 20/25

11. Weld the Cover D25,4mm (Parts 9) to the Round Tubing D25,4x3,2mm Cut Lenght

340,00mm (Part 8).

Make the two of these subassemblies.

12. Weld these two subassemblies to the subassembly made in step 11.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 21/25

Make the two of these subassemblies.

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 22/25

Crossbar subassembly 

13. Weld the Sheet 120x40mm (Parts 2) to the Rectangular Tubing 60x40x4mm, CutLenght 1050,00 (Part 1).

Make the three of these subassemblies.

14. Fix these three subassemblies to the subassemblies made in step 13 using SpringLock Washer A-10 (Part 3), Hexagon Nut M10 (Part 4) and Hexagon Head Screw

M10x80mm (Part 5)

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 23/25

Weight Set Subassembly 

1. Weld the Delimiter (Part 2) to the Round Tubing D31,8x6,3mm (Part 1).

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 24/25

2. Line up the dumbbells at the both ends of subassembly made in the previous step.

3. Fix the dumbbells using Dumbbell Nut (Parts 5).

8/12/2019 Squat Rack Plan

http://slidepdf.com/reader/full/squat-rack-plan 25/25