Presentation on Manufacturing Process

PRESENTATION ON MANUFACTURING PROCESS

COMPANY INTRODUCTION

Shashwat International Limited was incorporated in December 2003 as a public limited company to carry out the business of refractories in India. The company is promoted by Dr. Ravin Jhunjhunwala, a scion with over 50 years of experience in the refractory industry.

Shashwat International Limited consists of two group companies:- Orind Bengal Orind West Coast

MANUFACTURING UNITS

India China Singapore Bulgaria

PROMOTERS

Dr.Ravin Jhunjhunwala(Chairman) Mr.Sengottuvel(M.D.) Mr.K.K.Panda(M.D.) Mr.Pravin Rheel(Director) Mr.Mahesh Agarwal(CFO) Dr.Jignesh(HR Manager)

Dr.Ravin Jhunjhunwala(Chairman)

MISSION

To constantly harness technology & resources in the Refractory Industry to optimal levels thereby offering continually superior services.

PRODUCT INFORMATION

Fire Clay Super Duty Silica Bricks (for glass) High Alumina High Alumina (Chemical Bonding) Magnesia Carbon Basic Fired Slide Gate Monolithics

MANUFACTURING PROCESS

RAW MATERIAL & CLOT

Raw material is brought from West Bengal, Orissa & other states.

It includes Mercer Clay,MP3 Clay, Betonies, Bauxite, Gypsum, Magnesium ,etc.

All these are mixed in proper proportion and is converted in to CLOT.

RAW MATERIAL CLOT

MILL HOUSE

Clot is transferred to mill house. Here it is heated at 1400-2500°C. As a result it becomes harder than before.As a result it becomes harder than before. There are eight mill houses for different There are eight mill houses for different

bricks.bricks.

ROASTING

From Mill House it is transferred to Roasting section where the temperature is maintained and its gets colored depending upon the material used.

In this section Petroleum Coke is used to absorb air and to emit it outside.

ROASTED MATERIALCOKE

GRINDING

Roasted Clot is grinded in the grinding department.

CONVEYOR BELT

Grinded Clot is taken to the storage vessel through Conveyor Belt.

Before entering the storage vessel the grinded material passes through various processes until it is converted into Finely Powdered Material.

CONVEYOR BELT PROCESSING MACHINERY

STORAGE VESSEL

The finely powdered material enters into the Storage Vessels for making different types of bricks.

TUNNEL - 1

When the powdered material enters storage vessels, modifications are made by an computerized machine.

Modifications are made to make different qualities of bricks.

CONVEYOR BELT AND CRANE

After the alterations are done, the resultant material is carried forward by the Conveyor belt and Crane and is carried forward to shaping machinery.

SHAPING MACHINE

Through the crane, the material enters Shaping machine where the material gets shape of a Brick.

Various machines are there for giving different shapes to bricks.

TROLLEY

After giving specific shapes to bricks, it is transferred to Tunnel 2 for further processing.

Trolley is to be carried manually to the tunnel.

TUNNEL - 2

To give the final touch to bricks, these are transferred from trolley to the Tunnel-2.

The best feature of the Tunnel – 2 is that, here temperature is maintained automatically according to the requirement of bricks.

To maintain the temperature, the walls of tunnel is stuffed with special cotton.

The temperature can be inferred from a hole provided on the front wall of the Tunnel.

TUNNEL - 2

Front Part Inner Part

After the whole process the final product is ready. It appears as below :

PACKING & DISPATCH

After the bricks are ready, it is sent for Quality Check and if it is approved, then it is packed and dispatched as per the order.

MAJOR CLIENTS Mittal Steel Ispat International Fundia Group Jindal Steel Lafarge SAIL Krosaki Harima Sumitomo Metals TYK Corporation Keystone Steel Arcelor Group

OVERVIEW