Click here to load reader
Upload
sentry-air-systems-inc
View
169
Download
1
Embed Size (px)
DESCRIPTION
To mark the 2014 facility managers and technology conference in Las Vegas, we note 5 forces that complicate the role of facility manager: extremism, new regulations, outdated regulations, improved solutions, and the hazards presented by the new technology of 3D printing.
Citation preview
#NFMTVEGAS14
Not Exactly Acts of God, But Some Forces Complicate the Lives of
Facility Managers Big Time
1 – Extremism2 – New regulations3 – Outdated regulations4 – Improved solutions5 – Hazards of new technologies
THE FORCES
Bad actors live everywhere there’s a postal service to disrupt with biological, explosive threats
USPS: 23 million mail pieces each day
Somebody at your facility has to open the mail
Cost-effective ductless hood an engineering control that protects workers
More at our blogsite ISC states that “engineering controls provide the best means of preventing worker exposure to potential hazardous aerosolized particles.”
ISC states that “engineering controls provide the best means of preventing worker exposure to potential hazardous aerosolized particles.”
FREEBest practices for Safe
Mail HandlingInteragency Security
Committee
FREEBest practices for Safe
Mail HandlingInteragency Security
Committee
1EXTREMISM AND INCOMING MAIL SECURITY
NEW REGULATIONSExample: USP 800mayrequire pharmacies to add ductwork, purchase new lab hoodsMore…
2
OUTDATED REGULATIONS Meeting out-of-date OSHA exposure standards
doesn’t relieve you of responsibility Newer standards of other agencies may apply
General Duty Clause is the overarching requirement for all employers
More…
Toluene 20 ppm TWA
200 ppm TWA
100 ppm TWA
Symptoms: weakness, confusion, euphoria, dizziness, headache; dilated pupils, anxiety, muscle fatigue, insomnia; paresthesia; dermatitis; liver, kidney damage
ACGIH OSHA NIOSH
3
OUTDATED CONCEPTS: DILUTION VS SOURCE CAPTURE
Dilution Ventilation Source Capture [local exhaust]Advantages Disadvantages Advantages Disadvantages
Usually lower equipment, installation costs.
Does not completely remove contaminants.
Captures contaminant at source, removes it from
workplace.
Higher costs for design, installation, equipment.
Requires less maintenance.
Cannot be used for highly toxic chemicals
Only choice for highly toxic airborne chemicals.
Requires regular cleaning, inspection,
maintenance.Effective for small
amounts of low toxicity chemicals
Ineffective for dusts, metal fumes, large amts
of gases, vapors.
Can handle all sorts of contaminants, including
dusts, metal fumes.
American Conference of Governmental Industrial Hygienists says,“Air changes per hour” or “air changes per minute” is a poor basis for ventilation criteria where environmental control of hazards, heat, and/or odors is required. The required ventilation depends on the problem, not on the size of the room in which it occurs.
More….
4
3D printing produces nano-scale ultra fine particles (UFP), just like diesel engines
Inhaled nano particles can migrate from lungs to other tissues, including brain
Ultrafine particle emissions from desktop 3D printers, by Brent Stephens, Parham Azimi, Zeineb El Orcha,
Tiffanie Ramos Department of Civil, Architectural and Environmental Engineering, Illinois Institute of
Technology, Chicago, IL, USA, National Institute of Applied Sciences (INSA de Lyon), Lyon, Fran
http://bit.ly/11RTixO
Ultrafine particle emissions from desktop 3D printers, by Brent Stephens, Parham Azimi, Zeineb El Orcha,
Tiffanie Ramos Department of Civil, Architectural and Environmental Engineering, Illinois Institute of
Technology, Chicago, IL, USA, National Institute of Applied Sciences (INSA de Lyon), Lyon, Fran
http://bit.ly/11RTixO
5NEW TECHNOLOGIES, NEW HAZARDS
Sentry Air wishes you a great time and a productive conference in Las Vegas.
www.sentryair.com
Concerned about air quality in your facility? Our Application Specialists can help you solve your fume
problems. Call us at 800.799.4609, email [email protected], or visit our website