Inside here is where it all happens.

Welcome to the show!I hope you enjoy looking at my

presentation as much as I enjoyed making it!

(This slide is under construction. There will be a picture of the outside of my shop here filling this slide)

Click your mouse to proceed to the next slide

Used 2x12 pressure treated woodThis thing weighs about 200 pounds! It is real solid and it feels like you're sitting on a

concrete block!

I make many of these bluebird houses at a time.

Tracing Board

Legs fold into frame

2x4's

I used this frame on a lot of the projects in this slide show.

There is a glass in here!

Gazebo bird feederto fit on a 4x4 post

4x4 “bracket”

I left these in the weather to see how the cardboard feed bins would hold up. Even thoughthey were primed and painted, they didn't last. I disassembled them and now they await a more durable core; possibly PVC pipe. They will look almost identical as they appear here when I get them finished. The vertical slots are plastic covered feed level windows.

Wire Spool Feeders

The blue letters I cut out with the table slanted on the scroll saw. The cut out letters were then used on the sign in the next slide.

(The idea for these two came from Patrick Spielman's “The New Scroll Saw Handbook”.)

More scroll work in 1/4” plywood

(This project will be finished in a yet-to-be-determined manner.)

This one I did on my pantograph.

(All of the nicks are from it getting shuffled from one place to another in my shop)

Another pantograph sign in a shadow font. The black is

routed out and painted after the silver was sprayed on.

I originally made this for my Mother-in-Law for her dog, but she gave US the dog!

This is a cut-through variation of the shadow font.8-1/2”

(It is cut out where the black is which is a black backer)

Name Plate Stand

This is called “The Bird Feeder

Guy”From “Birdhouses

YouCan Build in a Day”

from Popular Woodworking Books

that my two daughters got me for

Father's Day last year. I really love that

book; they made a GREAT choice!

I made three of these. One for my Mother-in-Law, one to sell if I canand one to keep because I think

he's really cool!

40-1/2”

The next few slides are of my chess set done on the scroll saw. The pieces and board still need to get the clear finish. The pieces are from the same “The Art of the Scroll Saw” by Patrick Spielman mentioned earlier.

Imported walnut and maple board with pine pieces

This and the next slide is a“Sun, Moon, Star” also from “The Art of the Scroll Saw” by Patrick Spielman. There are three levels made by tilting the table at different degrees. The next slide shows the levels a little better.

A spiral bowl to fold for transport.

8-3/4”

This pattern was Taken from anotherBook by Spielman,“The New Scroll Saw Handbook

Hearts Mug Tree

My own design; not from a book!

The EndThe End

Thank you for looking at my projects!Thank you for looking at my projects!

Created by Dean Rambler on “Open Office Presentations”

I hope you enjoyed the show and