www.sommer-informatik.de
1
WinIso 2DThe software solution calculates heat flows in any two-dimensional
cross sections. These are the basics to determine the heating demands and loss and
the prevention of moisture in building components and its surface.
www.sommer-informatik.de
2
WinIso 2D the programm calculates:
temperature, isothermal lines, heat flows
heat transfer coefficient of single components and of the hole
building component
surface temperature
thermal bridges value Ψ
condensate water in the building components
temperatur factor fRsi
www.sommer-informatik.de
3
you can import CAD-drawings with the DXF-Converter
or you can draw cross sections in the program
CAD - Import
www.sommer-informatik.de
4
the project is defined by filling the cells with project material
material with thermal and hygrothermal characteristics are saved in the material data base
you can add or change materials
material
www.sommer-informatik.de
5
you can define or accept climate conditions
shows the temperature distribution
shows the heat flows
illustration
www.sommer-informatik.de
6
isothermal lines simplify the interpretation
illustration
www.sommer-informatik.de
7
you can get the suface temperature and the fRsi by one click
fRsi and surface temperature
www.sommer-informatik.de
8
to check the condensate water in the building components or on the surface press
condensate water
www.sommer-informatik.de
9
it is possible to show u-value and temperature distribution at every point of the cross section
U - value
www.sommer-informatik.de
10
Uf-value and Psi-value are calculated according to EN10077
Uf- und Ψ - value
www.sommer-informatik.de
11
the Uw-value can be calculated with Ug, Uf, Ψ and the measurements of the Window
Uw - value
www.sommer-informatik.de
12
cross section in any illustration
complete documentation of all values, materials, temperatures and U-values
personal title block can be inserted
printout
www.sommer-informatik.de
13
for further information www.winiso2d.de
Sommer Informatik GmbH
Sepp-Heindl-Str. 5
D-83026 Rosenheim
Tel.: +49 (0)8031 2488-1
Fax: +49 (0)8031 2488-2