7.0.IntroductionSTEPS IN TOTAL PMD PROGRAMME Guidelines for desingning and Implementing Programme▪Definitinon of Documents▪Objective of Documentation▪Importance of documentation▪Preparation Issue and use of documentation▪Product Traceability▪Storage and retention of documents and records▪Storage ,Retrieval of documents▪Disposal of documents .
www.bpha
rman
otes.c
om
7.1.SPECIFICATION
Specification of active and inactive starting material
Specification of Packaging material
Specification for intermediate and bulk products
Specification for finished products
Documents Required :API and Inactive starting Material Packing Material ,Intermeiate and bulk products,Finished products
www.bpha
rman
otes.c
om
7.2. Master production and control record (MPCR)
7.3 Batch production and control records (BPCR)
7.4 Importsnt SOPs and Records
7.5 Change control
www.bpha
rman
otes.c
om
7.6.Site Master Files ▪ General information ▪ Personnel▪ Premises and Equipments ▪ Documentation ▪ Production ▪ Quality control▪ Contract Manufacturinf and analysis Any Other
Services ▪ Post Operational Activities ▪ Self inspection▪ Export of drugs
Documentation Required Site Master Files
www.bpha
rman
otes.c
om
7.0.Introduction :
Consider To Design PMD following Environmental Factors :
Manufacturing Activities Present and Planned :Tablets,Capsules,Injection,Liquid Orals and Ointments
Countries Planned for Export:To decide requirements as per WHO,UK,Australia,South Africa
Computerisation Level in the company
Any other Consideration www.bp
harm
anote
s.com
Steps in total PMD Progamme Step 1.0:
Select one Person from production and another from QC/QA ,whos knows about Organisation.
Step.2.0:
List out name and formulation departments
Step 3.0:
List out QC/QA Activities
Stp.4.0.
List out countries Planned for expertswww.bpha
rman
otes.c
om
Step5.0:List out types of documents needed for experting countries.
First:Documents Required for
a.Personnel Training b.QC c.Bulding and factory d.Equipments e.Material and stores f.Engineering g.Marketing and distrubution h.Market Complaints
Second : For above categories decide following documents a.SOP b.Reports c.charts d.formats e.specification f.Test methods g.MPCR And BPCR
www.bpha
rman
otes.c
om
Steps:06 Design documents
Format
Content
Size and Quality of papers
Step 7:
Explain and Train Concerned people
Step 08:Take trial run rehearsal and remove diffuculities ,redesign
Step.9.Implements the records
Steps 10.feedback and review of regular interval www.bp
harm
anote
s.com
01.Definition of documents :Any written statement
02.Objective of Documentation:
2.1.Define system of information and control :
2.2.To follow correct procedure
2.4.To provide confirmation of task
2.5.To allow checking and calculation
2.6. to allow tracing of batch historywww.bp
harm
anote
s.com
03.Importance of Documentation
3.1. It is a part if QA And should be related to cGMP
3.2.its defines specification and methods of manufacturing and control
3.3.it Ensures manufacturing personnels that what to do ? when to do? Where to do?why to do ?
3.4.ensure that the authorised person get all introduction ,it help him to release of batch
3.5.Helps in Audit :trail to invetstigate the batch history.
www.bpha
rman
otes.c
om
4.1.Easy to use to check ,relevent data only.The documents which is not to be used should be removed.
4.2 The Documents should contain❖ 1.Company’s Name❖ 2.Purpose ,title of documents❖ 3.identity numbers❖ 4.Date of authorisation❖ 5.Date of expiry or reviews (in case of SOP)❖ 6.Signature of person prepare,Signature of person authorised thedocuments❖ 7.distribution list❖ 8.page number❖ 9.The way the documents is t be used and by whome❖ 10.The reason for revision to br documented❖ 11. Reference use to prepare the documents
www.bpha
rman
otes.c
om
4.3.should be computerd printed, the batch documents should be initiated to confirm that it is verified .
4.4.correct the documents,initial,sign,and date the uncorrected statement should be readable;where possible reason for correction is to be mentioned
4.5 Documents which have provision for entry should have
-space for entry -some space between two entries
- Information entered should be readable
4.6.Instruction should be indirecct command 4.7.use up to date anfd authorised documents
,file supercoded documents.
www.bpha
rman
otes.c
om
4.8.The responsible person of QA or person who is delegate should authorised
Master prodution and control record (MPCR)
Bactch production and control record (BPCR)
Standard operting procedure (SOP)
Master documents aaffecting quantity.
www.bpha
rman
otes.c
om
5.0.PRODUCT TRACEABILITY
5.1 complete batch history should be available i.e when the batch/activities started and when completed and when disposal /distruction was done
5.2.Sales and retention of documents and records
www.bpha
rman
otes.c
om
6.0.Storage and retention of documents and records
6.1.Upto one year after expiry ,where expiry date is nit applicable up to six years ,batch documenst aaaaaare retained.
6.2.Photocopy ,soft copy ,hard copy back up data are preserved safely.
Protect them from that loss alteration etc.
www.bpha
rman
otes.c
om
7.1 Retrivel should be eay total list should be available showing :
The name of documents
Location of availability
Person to be contacted for retrieval
7.2.Batch production and control record (BPCR) is kept in key lock with QA
7.3Master Production and control record (MPCR) and master documents can be retrived permission of QA.
www.bpha
rman
otes.c
om
0.8 Disposal of documents :
8.1 QA destroyes expired documents by shreding ,burning after proper documents and authorisation.
www.bpha
rman
otes.c
om
It is the set of parameters the itoms is supposed to meet.we need specification for the following .
1.Active and inactive starting material
2.Packing material :primary,printe and others
3.Intermediate and bulk Product
4.Finished Pharmacutical product
www.bpha
rman
otes.c
om
Common Contents in Any documents:
1.Name of the company
2.File of document ,specification
3.Dcocument number:Unique Identification number
4.Date of preparation ,Issue,Effective Checking,Authorisation And Issue
5.Name of person Prepared,Checked and Authorised .
6.circulation and distribution List:www.bp
harm
anote
s.com
3.Specification for intermediate and bulk products
If these are purchased or sold ,the specification will be like starting Material.
If data are used to evaluate finished product ,specification becomes more useful.
www.bpha
rman
otes.c
om
4.Specification For Finished Products Beside commmon poinsts more aditional
points will be as under. 1.Name of the product 2.Code no reference 3.List of active ingrediants 4.The formula or reference formula 5.limit for qualitativr and quantitive
requirements 6.Sampling Instruction 7.Limit for quantitative and qualitative
requirements 8.Testing Ref/Procedure. 9.Storage condition 10.Shelf life.
www.bpha
rman
otes.c
om
Document required
Specification for:
Active and inactive starting material
Packaging materials
Intermediated and bulk drug
Finished product
www.bpha
rman
otes.c
om
7.2Master Production and Control Record (MPCR)
Master production and control recod (MPCR)
Master formula record (MFR)
Master formula and packaging instruction WHO.
Master manufacturing and master packaging MCC(south africa)
Manufacturing formula and processing instructions.(TGA Australia).
www.bpha
rman
otes.c
om
SOP for MPCR:
Should be available .
Purpose:
Uniformity from batch to batch.
Product and Batch size:
Prepare for each product and each batch size.
Prepared,Checked and Authorised:
The name person, designation and date who prepared,checked and authorised .
www.bpha
rman
otes.c
om
CONTENTS IN MPCR:1.Name and stregth of product :
Paracetamol tablet I.P. 500mg
2.Lable claim :
a.Each tablet contains :
a.paracetamol I.P. 500mg
b.Each 5ml contains :
Paracetamol I.P. 125mg
Colour: amaranth.
www.bpha
rman
otes.c
om
Sr.no Ingredients
specification
Overage Weight for tab
Weight for batch at 1.0 lakh
Tab
1 Paracetamol
IP 1% 505 50.0
2 Nitrocrystaline
cellulose
IP - 10 1.0
3 Starch IP - 25 2.5
4 Talc IP - 5 0.50
5 Magnesium stereate
IP - 5 0.5
6 Total 550 50.500
Remark:Paracetamol with bulk density not less than 0.8gm/cc is to be used.Microcrystalline cellulose:sieve size 325
www.bpha
rman
otes.c
om
4.Theroretical yield:(Minimum and Maximum)
Granulation 100% (Qty.Kg)
Compression 100% (Qty.Kg)
Strip packing 100% (Qty.Nos)
Cartoning 100% (Qty.Nos)
5.Actual yield(Minimum and maximum)
Granulation 96-104%
Compression 94-106%
Strip packing 96-104%
Cartoning 98-102%
If the actual yield is not in the above limits investigation is required,explination is to be given and authorisation is needed.
www.bpha
rman
otes.c
om
Sr.No Size Qty for Tab(Nos)
Wastage
1 Label (60 *100mm)
100 5
2 Tin container(dia
150mm*height:180mm)
100 1
3 Shipper box(L:500*w
300 *ht 200mm)
10 -
4 .Box label (60*100mm)
10 1
•Printed packing material is approved by QA with signature and data•All packing material is approved by QA
www.bpha
rman
otes.c
om
7.Manufacturing and control instructions:
Give stage wise manufacturing instructions ,in process control limits,precautions,testing & sampling instruction.
To avoid multiplication,the reference of various SOP's used.
8.Location &Equipment:
Is described
www.bpha
rman
otes.c
om
9.Equipment claiming,assembling,operation,calibration :
Reference of various SOP is made
10.Process control sampling instructions: with acceptable limit
11.storage conditions :At various stage.
12.Batch production and control Record(BPCR)www.bp
harm
anote
s.com
Batch production & control record (US-FDA)
Batch record(Manufacturing) & batch record (packaging) (MCC-AFRICA)
It is replica of M.P.C.RBatch histroy :can be traced
content: (1) Production order: (a) Ingredients (Requirements): Is mentioned
with weight, specification &AR NO. for each Tab or unit & batch size
(2) Packaging Material requirement : is mentioned with size,quantity etc.
www.bpha
rman
otes.c
om
(3) Process Record : Date,timing of activites
(i)Blending
(ii) Granulation
(iii) Drying
(iv) Compression
(v) Coating
4) Identification of location : room is mentioned
5) Identification of Equipment: on which process is done
6) Identification of person performed & supervised : name of person does the operation & supervises.
7)Actual yield : if not within limit,statement is given of actual yield is abnormal , investigate ,correct the mistake
8) Identification of packaging material:deatail of pack material size etc.
www.bpha
rman
otes.c
om
9) Identification of ingredient :it is shown in ingredient reqirement
10) Line clearance
11) Process control
12) Specimen label :Approved by QA
13) Record of deviation : Investigation remark
14) Sampling : Details with person, time stage.
15) Result of examination : at various stages documents required
16) Batch production & control record for each batch produced
www.bpha
rman
otes.c
om
1. Site master file
2. validation master plan
3. calibration master plan
4.Planned preventive maintance programme, product complaint handling SOP/R
4.Product recall & return: SOP/R
5.Distribution: SOP/R
6.Equipment: validation, operation , calibration,cleaning-log book
7.Equipment :assembley validation SOP/R
8.SOP/R
www.bpha
rman
otes.c
om
9. Equipment and instruments: operation, maintenance calibration SOP/R.
10. Facility :cleaning, sanitation, maintenance SOP/R
11.Environment monitoring SOP/R
12.Personnel: qualification, training, clothing and hygiene.
13.Pest control: SOP/R.
14.Internal labelling SOP.
15.Batch numbering:SOP
16.RM/PM:Receipt, storing,sampling and dispensing SOP
17.RM/PM/finished product: sampling record.
www.bpha
rman
otes.c
om
18.RM/PM/Finished product: testing standard testing procedure.
19. RM/PM/Finished product:testing record.
20.Record:Retentio and disposal record.
21.Control manufacturing, analysis record.
www.bpha
rman
otes.c
om
all above 21 documents.
www.bpha
rman
otes.c
om
Definition:
It is a system of procedure where in changes made in quality system are reviewed, justified, documented and approved.
It shall conform to corporate and regulatory requirement.
Need of change:
is required when the is increase in:
1)Rejection i.e. process has shifted
2)Complaints.
www.bpha
rman
otes.c
om
change made should affects 1)validated condition: of process
,system,control. 2)product quality and safety 3)Regulatory commitment. Priciple of change control: 1)Name of initiator/proposer of change i.e.
identity the owner of change. 2)Review and approval of change: change is reviewed justified and approved.
www.bpha
rman
otes.c
om
3)Prevent adverse affect: prevent changes affecting adversely on quality safety and regulatory aspect.
Types of change control:
1)change control : such changes are planned to control the quality.
2)Deviation control: such changes are unplanned.some deviations have taken place in the system, they are controlled by taken by D
''Deviation contol procedure''.
Procedure:
steps involved in change control.
1) Initiation/proposing change:
To improve the quality reduce rejection make complaint one person initiates or proposes or suggests a change control.
www.bpha
rman
otes.c
om
He gives the description, justificational and adequacy.
2)Review of changes : affect on:
1) quality , safety of product.
2)validated system: process control system
3)regulatory aspect /commitment.
3)Approval of change control:
Authorised if found suitable.
4)Implement change control:
5)monitor the change control:
Whether is regularly giving good results, otherwise stop, review.
6)Train personnel:
change in procedure etc.done due change control so new training for new procedure is given.
7)Retain :
frequency to avoid mistakes in implementing change control.
Document required:
SOP/R: change control procedure.
www.bpha
rman
otes.c
om
It is a document it gives factual and complete information regarding site of
pharma manufacturing plant. it may range up to 100 pages or less , brief information is
desired. Content: universally accepted contents are : 1.0.General information 1.1Name and address of site 1.2Description of site 1.3brief information about organisation 1.4pharmaceutical manufacturing activities 1.5 other manufacturing activities 1.6types of products manufactured at site 1.7employees details 1.8external assistance 1.9quality management system 2.o PERSONNEL: 2.1organisation chart
www.bpha
rman
otes.c
om
2.2key personnel:Qualification, experience ,responsibilities
2.3training (basic ,in-service ) 2.4heath requirement :for personnel engaged in
manufacturing 2.5clothing 3.o premises and equipement: 3.1description of manufacturing area 3.2nature of construction and finished 3.4 maintenance of premises 3.5measure production and laboratory equipement 3.6maintenance of equipent 3.7calibration system 3.8sanitation 3.9special area 3.10water system 3.11brief description of ventillation system (HVAC
system)
www.bpha
rman
otes.c
om
4.1 preparation ,revision,distribution of document
4.2 other document related to product quality
4.3 additional document
www.bpha
rman
otes.c
om
5.1brief description of production operation
5.2handelling of materials
5.3handeling of rejected material and products
5.4brief description of general policy for process validation
www.bpha
rman
otes.c
om
6.1
quality management system
www.bpha
rman
otes.c
om
7.1contract manufacturing
7.2contract analysis
7.3contract services
www.bpha
rman
otes.c
om
8.1 product distribution
8.2 product complaint handling
8.3 product recall
www.bpha
rman
otes.c
om
9.1
self inspection programme
www.bpha
rman
otes.c
om
10.1product exported to different countries
10.2complaints and product recall if any
DOCUMENTS REQUIRED
1.site master file
www.bpha
rman
otes.c
om