Can install various applications for each processing on the right side.
Ex: Gang tools
Grinding spindle
TGL SeriesTGL Series
•Easy correction by
tool offset
NC ControlledPinch Cutter
•High reliability
•Rough / Finish
Shuttling is possible
•Can apply to various
size flexibly
TGL Specification
ItemItem UnitUnit TGL-15TGL-15 TGL-20TGL-20 TGL-30TGL-30
Chuck Size inchinch 6”/8”(OPT.)6”/8”(OPT.) 8”8” 10”/12”10”/12”
Max. Swing
Dia.mmmm Φ300 Φ450 Φ650
Max. Machining Weight
KgKg 66 2020 7070
Spindle speed rpmrpm 60006000 45004500 35003500
Spindle Motor kwkw 7.5/5.57.5/5.5 18.5/1118.5/11 30/2230/22
X-Axis cutting travel
mmmm 170+490170+490 190+1120190+1120 290+1670290+1670
Z-Axis cutting travel
mmmm 295295 370370 600600
X/Y Axis Rapid traverse
m/minm/min 3030 3030 3030
TGL Sales TGL Sales FeatureFeature Inverted Spindle self-loading workpiece as a Inverted Spindle self-loading workpiece as a
robotrobot Build-in Spindle: good quality of surfaceBuild-in Spindle: good quality of surface
roughnessroughness NC turret NC turret Automation : Stand alone or Automation : Stand alone or
Multi - connectionMulti - connection High cost performanceHigh cost performance Perfect chip disposalPerfect chip disposal