of 16 /16
TGL Series TGL Series

TGL Series

Embed Size (px)


TGL Series. TGL Series. TGL-15 6”/8”(OPT.) chuck TGL-20 8” chuck TGL-30 12”/10”(OPT.) chuck. TGL Series. Can install various applications for each processing on the right side . Ex : Gang tool s Grinding spindle. Pinch Cutting for Disc Brake. Cutting both sides - PowerPoint PPT Presentation

Text of TGL Series

  • TGL Series

  • TGL SeriesTGL-15 6/8(OPT.) chuckTGL-20 8 chuckTGL-30 12/10(OPT.) chuck

  • Can install various applications for each processing on the right side. Ex: Gang tools Grinding spindle TGL Series

  • Cutting both sides at the same timeRough and Finish

    Pinch Cuttingfor Disc Brake

  • Width of cut 0.4~1.5 Rapid traverse 197ipm

  • Pinch Cutting

  • Surface Roughness

  • Easy correction by tool offsetNC ControlledPinch CutterHigh reliabilityRough / Finish Shuttling is possibleCan apply to various size flexibly

  • Quick AutomationUser-friendlyComplete machining in one set-upTGL series work feeder

  • TGL Specification

    ItemUnitTGL-15TGL-20TGL-30Chuck Sizeinch6/8(OPT.)810/12Max. SwingDia.mm300450650Max. Machining WeightKg62070Spindle speedrpm600045003500Spindle Motorkw7.5/5.518.5/1130/22X-Axis cutting travelmm170+490190+1120290+1670Z-Axis cutting travelmm295370600X/Y Axis Rapid traversem/min303030

  • TGL Sales FeatureInverted Spindle self-loading workpiece as a robotBuild-in Spindle: good quality of surface roughnessNC turret Automation : Stand alone or Multi - connectionHigh cost performancePerfect chip disposal

  • Thank you for your attention. We hope you have enjoyed our Invert Vertical Lathe TGL Series Presentation