© 2020 GEODynamics, Inc. All rights reserved.
ISSUE DATE NOTES 1 January 31, 2020 Initial release.2 February 10, 2020 New topics: General Data on Explosives, short guns: 3.375 GLB33; long guns: 2.875 GA, 4-6SPF; 3.125 GA, 4-6SPF; 4.625 GA 5SPF BH/XDP. 3 February 21, 2020 EPIC™ switch compatibility updates; added Nomenclature page.
4 March 6, 2020Added Mechanical Performance for 4-5/8” 5SPF; updated Basix™ Frac charges (0.45 EHD); added Basix™ Frac charges to all 3-1/8” systems; added nominal entry hole details for all SandIQ charges, new details for SandIQ G (0.50 EHD); added pages for 4-1/2” 4-6SPF system; added Seal Material Selection chart; updated Nomenclature page with shaped charge part number suffixes and descriptions; minor text corrections and formatting cleanup.
5 March 27, 2020
New: 2-3/4 GLB short guns, 4” 6SPF guns, 4-1/2” 12SPF SBH, 12SPF XDP guns, 7” 18SPF, 360° Channel Finder, detonators and det cord, slickwall carriers, and Advanced E-Line Solutions. Updated: Mechanical Performance, pressure rating for 2-7/8” HP (updated gun page also); 2-1/2” guns, added Basix EC2-25A1121-E perf. data; 3-1/8” short and 6 SPF long guns, added limitation note for 19g charges in dry gas and added charge perf. for EC2-25A1121-E; Basix, Razor, and Connex charge perf. tables updated for 3-1/8” 19g charge in dry gas; added EC2-25A1121-E and EC2-33A1921-E for Basix.
6 May 15, 2020Updated topics: Basix charges, added EC2-23A1121-E, BasixFrac 25, and BasixFrac 50 in all relevant topics; FracIQ charges, added FracIQ 20 charge per-formance details, EHD variation updates for FracIQ 45 and FracIQ 50 in all relevant topics, added FracIQ LD charges to all relevant topics; EPIC Command Shooting Panel part number updated. Removed Seal Material Selection Chart.
7 June 5, 2020 New topics: 4-3/4” 24 SPF and 6-3/4” 22 SPF HPHF systems. Updated 7” gun systems to add back-up ring part numbers for two-piece tandems.
8 July 24, 2020
Branding updates (SandIQ®); clarifications for 2-3/8” charges rated for fluid and dry gas conditions (updated mechanical performance, charge lists by brand, and 2-3/8” conventional long guns catalog pages); notes added to 3-1/8” 12spf & 3-3/8” 12 spf charge tables (31C w/zinc cases now available). STRATX and VaporGun: added GIC31-A08 and GIC31-P07; removed GIC31-V07; added GIC31-HF03; expanded GIB31 spiral series to list all phasings and gun lengths. Updated product descriptions and table formatting cleanup for STRATX, VaporGun, HELLFire topics. Updated GLB31 list of carriers: added -A005 and -O006; removed -J005, -P007S, -R012, and -R014. Detonators: clarified description and added an image for DET-A161-Adapter.
Revisions
About GEODynamicsGEODynamics is the global technology and manufacturing leader in perforating, downhole completion, intervention, and wireline-conveyed solutions.
GEODynamics creates and delivers downhole solutions that enable unsurpassed well economics, performance, and lifespan.
Patentswww.perf.com/patents
Terms and Conditionswww.perf.com/terms-and-conditions
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page i Revised: July 24, 2020 1:30 PM
Table of ContentsMechanical Performance .............................................................................................................................................................5General Data on Explosives .........................................................................................................................................................9Shaped Charges ...........................................................................................................................................................................11
Basix™ Good Hole, Big Hole, and Super Big Hole 11Basix™ Extreme Deep Penetrating and Basix™ Frac Constant Entry Hole 12Connex® 13FracIQ® 15HELLFire® 17GEOPunch™ DUB Punchers and Circulating Charges (Tubing Punchers) 19Razor® Extreme Deep Penetrating 21Razor® Super Big Hole 22Refrax™ 23SandIQ® 25
Detonators, Detonating Cord, and Accessories .......................................................................................................................27STRATX™ Perforating System ....................................................................................................................................................29
3-1/8 in (79 mm), GIC Spiral 293-1/8 in (79 mm), GIC-HF Planar 353-3/8 in (86 mm), GIC-HF Planar 39
VaporGun™ Perforating System ................................................................................................................................................433-1/8 in (79 mm), GIB Spiral 433-1/8 in (79 mm), GIB-HF Planar 533-3/8 in (86 mm), GIB Spiral 573-3/8 in (86 mm), GIB-HF Planar 61
HELLFire® Perforating System ...................................................................................................................................................653-1/8 in (79 mm), Planar, External Scallops 653-3/8 in (86 mm), Planar, Internal Scallops 673-3/8 in (86 mm), Planar, External Scallops 714 in (102 mm), Planar, Internal Scallops 75
FracIQ® PRO Perforating System ..............................................................................................................................................773-1/8 in (79 mm), GWA Spiral 773-3/8 in (86 mm), GWA Spiral 83
SandIQ® PRO Perforating System ..............................................................................................................................................873-1/8 in (79 mm), GT Spiral 87
Page ii Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Short Guns ..........................................................................................................................................................912-3/4 in (70 mm), GLB Spiral 913-1/8 in (79 mm), GLB Spiral 953-3/8 in (86 mm), GLB Spiral 101
Conventional Long Guns ..........................................................................................................................................................1051-9/16 in (40 mm), RTG, 4 and 6 SPF, DP 1051-3/4 in (44 mm), RTG, 6 SPF, DP 1092 in (51 mm), RTG, 4-6 SPF, GH and DP 1112-3/8 in (60 mm), RTG, 5 and 6 SPF, XDP 1152-1/2 in (64 mm), RTG, 4 and 6 SPF, XDP 1192-3/4 in (70 mm), 4 and 6 SPF 1232-7/8 in (73 mm), 4 and 6 SPF 1273-1/8 in (79 mm), 4-6 SPF 1313-1/8 in (79 mm), 12 SPF, SBH 1373-3/8 in (86 mm), 4-6 SPF 1413-3/8 in (86 mm), 12 SPF, SBH 1454 in (102 mm) 4-6 SPF, XDP 1494-1/2 in (114 mm) 4-6 SPF, BH, GH, and XDP 1534-1/2 in (114 mm) 12 SPF, BH, GH, and XDP 1574-1/2 in (114 mm) 12 SPF, SBH 1594-1/2 in (114 mm) 17 SPM 1614-5/8 in (117 mm) 5 SPF, BH and XDP 1634-5/8 in (117 mm) 12 SPF, XDP 1674-5/8 in (117 mm) 12 SPF, SBH 1694-5/8 in (117 mm) 16 SPF, SBH, Standard and High Pressure 1714-3/4 in (121 mm), 24 SPF, HPHF 1735 in (127 mm) 12 SPF, SBH 1755-1/8 in (130 mm) 12 SPF, XDP 1775-1/8 in (130 mm) 12 SPF, SBH 1795-1/8 in (130 mm) 16 SPF, SBH 1815-1/8 in (130 mm) 22 SPF, GH and DP 1836-3/4 in (171 mm), 22 SPF, HPHF 1857 in (178 mm), 12 SPF, GH and DP 1877 in (178 mm), 12 SPF, SBH 1917 in (178 mm), 15 SPF, SBH, Standard and High Pressure 193
Channel Finder Gun System ......................................................................................................................................................1957 in (178 mm), 18 SPF, SBH, 360° 195
Eclipse Gun System ...................................................................................................................................................................1977 in (178 mm), 20 SPF, SBH 197
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page iii Revised: July 24, 2020 1:30 PM
Slickwall Systems ....................................................................................................................................................................199Direct Connection Crossovers ...............................................................................................................................................203
Top Gun Connector 203Top Gun Connector Rebuild Kits 204
Gun System Thread Protectors ...............................................................................................................................................205Wireline Release Tools .............................................................................................................................................................207EPIC™ Systems ...........................................................................................................................................................................209
EPIC™ Command 209EPIC™ Test 211EPIC™ Switches 213
Advanced E-Line Solutions .......................................................................................................................................................215Cableheads 215Collar Locators (CCL) 216Sinker Bars 217Adaptors 218Centralizers and De-Centralizers 220Freepoint Tools 221
Part Number Descriptions ........................................................................................................................................................223Loaded Gun Systems, Unconventional 223Scalloped Gun Systems, Conventional 224Shaped Charges 225
Nomenclature ............................................................................................................................................................................227
Page iv Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 5 Revised: July 24, 2020 1:30 PM
Mechanical PerformanceData Summary
*Hardware calculated breaking point‡ For 2-3/8” in dry gas, maximum shot density is 5 spf and limited to low-swell (LS) charges only. Refer to catalog pages for more details.FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. /System Type
SPF / Phasing(tested)
Maximum Pressure(psi) [MPa]
Maximum Tensile*(lbf)[kN]
Charge Size/Type Charge Part Number Perforating Condition
API Maximum Gun Swell
(in)[mm]
1-9/16” GA Series, RTG4 spf / 0°
20,000 [138] 88,100 [392]3.2g, HMX, Razor® XDP EC1-15A0322
In Fluid or Dry1.69 [42.93]6 spf / 60° Fluid
6 spf / 0° 2.9g, HMX, Razor XDP EC1-15A0322-L Dry1-3/4” GA Series, RTG 6 spf / 0° 20,000 [138] 88,100 [392] 5.1g, HMX, Razor XDP EC1-17A0522 Fluid 1.91 [48.51]
2” GA Series, RTG
6 spf / 60°
20,000 [138] 153,100 [681]
6.8g, HMX, Razor XDP EC1-20A0722 Fluid 2.14 [54.36]6 spf / 60° 6.5g, HMX, Razor XLS XDP EC1-20B0722 In Fluid or Dry 2.22 [56.39]6 spf / 60° 6.8g, HMX, Connex® EC1-20A0722-RC Fluid 2.18 [55.37]6 spf / 60° 6.5g, HMX, Connex XLS EC1-20B0722-RC In Fluid or Dry 2.29 [58.16]
2-3/8” GA Series, RTG6 spf / 60°
20,000 [138] 153,100 [681]11.0g, HMX, Razor XDP EC2-23A1122
Fluid 2.56 [65.02]6 spf / 60° 11.0g, HMX, Connex EC2-23A1122-RC6 spf / 60° 10.5g, HMX, Connex XLS EC2-23A1122-RC-LS ‡ Fluid or Dry 2.62 [66.55]
2-1/2” GA Series, RTG6 spf / 60°
20,000 [138] 137,500 [612]11.5g, HMX, Razor XDP EC2-25A1122
Fluid 2.66 [67.56]6 spf / 60° 11.5g, HMX, Connex EC2-25A1122-RC
2-3/4” GA Series6 spf / 60°
25,000 [172] 176,600 [785]15.0g, HMX, Razor XDP EC2-27A1522
Fluid 2.90 [73.66]6 spf / 60° Dry 3.02 [76.71]6 spf / 60° 15.0g, HMX, Connex EC2-27A1522-RC Fluid 2.91 [73.91]
2-3/4” GLB27 Series 6 spf / 60° 25,000 [172] 176,600 [785] 15.0g, HMX, Razor XDP EC2-27A1522Fluid 2.90 [73.66]Dry 3.02 [76.71]
2-7/8” GA Series, Standard
6 spf / 60°
20,000 [138]213,700 [950]
15.0g, HMX, Razor XDP EC2-27A1522Fluid or Dry 3.13 [79.50]
6 spf / 60° 15.0g, HMX, Connex EC2-27A1522-RC6 spf / 60° 18.0g, HMX, Connex EC2-28A1522-RC
Fluid 3.07 [77.98]6 spf / 60° 18.0g, HMX, Razor XDP EC2-28A1522
2-7/8” GA Series, HP6 spf / 60°
25,000 [172]15.0g, HMX, Razor XDP EC2-27A1522
Fluid or Dry 3.13 [79.50]6 spf / 60° 15.0g, HMX, Connex EC2-27A1522-RC
Page 6 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Carrier O.D. /System Type
SPF / Phasing(tested)
Maximum Pressure(psi) [MPa]
Maximum Tensile*(lbf)[kN]
Charge Size/Type Charge Part Number Perforating Condition
API Maximum Gun Swell
(in)[mm]
3-1/8” GIC31, STRATX™6 spf / 60°
20,000 [138] 140,000 [622] Various Charge Options See Catalog PagesFluid (22.7g) 3.46 [87.88]
6 spf / 60° ‡ Dry (19.0g) 3.60 [91.44]3-1/8” GIC31-HF STRATX™ 6 shot HELLFire™ 16,000 [110] 140,000 [622] 7.0g, RDX, HELLFire™ EC2-31K Series Fluid 3.46 [87.88]
3-1/8” GIB31, VaporGun™6 spf / 60°
20,000 [138] 140,000 [622] Various Charge Options See Catalog PagesFluid (22.7g) 3.46 [87.88]
6 spf / 60° ‡ Dry (19.0g) 3.60 [91.44]3-1/8” GIB31-HF VaporGun™ 6 shot HELLFire™ 16,000 [110] 140,000 [622] 7.0g, RDX, HELLFire EC2-31K Series Fluid 3.46 [87.88]
3-1/8” GHF31 Series 6 shot HELLFire™ 16,000 [110] 245,200 [1090] 7.0g, RDX, HELLFire EC2-31K Series Fluid 3.46 [87.88]
3-1/8” GWA31, FracIQ® PRO6 spf / 60°
20,000 [138] 245,000 [1089] Various Charge Options See Catalog PagesFluid (22.7g) 3.46 [87.88]
6 spf / 60° ‡ Dry (19.0g) 3.60 [91.44]3-1/8” GT31, SandIQ™ PRO 60° Phase/45° Charge Tilt 22,500 [155] 245,200 [1090] 22.7g, RDX, SandIQ™ EC2-33A2371-SF Fluid 3.46 [87.88]
3-1/8” GLB31 Series6 spf / 60°
22,500 [155] 245,200 [1090] Various Charge Options See Catalog PagesFluid (22.7g) 3.46 [87.88]
6 spf / 60° ‡ Dry (19.0g) 3.60 [91.44]
3-1/8” GA Series
6 spf / 60°
22,500 [155] 245,200 [1090]
22.7g, HMX, Razor® XDP EC2-33A2322 Fluid 3.41 [86.61]6 spf / 60° 22.7g, HMX, Connex® EC2-33A2322-RC Fluid 3.41 [86.61]6 spf / 60°
19.0g, HMX, Razor XDP EC2-33A1922Fluid 3.46 [87.88]
5 spf / 60° ‡ Fluid or Dry 3.60 [91.44]3-3/8” GIC33-HF, STRATX™ 6 shot HELLFire™ 15,000 [103] 175,000 [778] 7.0g, RDX, HELLFire EC2-33K Series Fluid 3.48 [88.39]
3-3/8” GIB33, VaporGun™6 spf / 60°
22,700 [156] 322,000 [1432] Various Charge Options See Catalog PagesFluid 3.56 [90.42]
6 spf / 60° Dry 3.63 [92.20]3-3/8” GIB33-HF, VaporGun™ 6 shot HELLFire™ 15,000 [103] 322,000 [1432] 7.0g, RDX, HELLFire EC2-33K Series Fluid 3.48 [88.39]
3-3/8” GHF33, HELLFire™ 6 shot HELLFire™ 15,000 [103] 331,900 [1476] 7.0g, RDX, HELLFire EC2-33K Series Fluid 3.48 [88.39]
3-3/8” GLB33 Series6 spf / 60°
22,700 [156] 331,900 [1476] Various Charge Options See Catalog PagesFluid (25.0g) 3.56 [90.42]
6 spf / 60° Dry (22.7g) 3.63 [92.20]
3-3/8” GA Series
6 spf / 60°
22,700 [156] 331,900 [1476]
25.0g, HMX, Razor XDP EC2-33B2522 Fluid 3.56 [90.42]6 spf / 60° 22.7g, HMX, Razor XDP EC2-33A2322 Fluid or Dry 3.62 [91.95]6 spf / 60° 25.0g, HMX, Connex EC2-33B2522-RC Fluid 3.56 [90.42]6 spf / 60° 22.7g, HMX, Connex EC2-33A2322-RC Fluid or Dry 3.63 [92.20]
3-3/8” GA Series, SBH 12 spf / 150°-30° 20,000 [138] 331,900 [1476] 12.0g, RDX, Razor SBH EC2-31B1231 Fluid 3.46 [87.88]
*Hardware calculated breaking point‡ For 3-1/8” 19g in dry gas, maximum shot density is 5 spf or limited to one- (1) and two- (2) shot short guns only. FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Mechanical PerformanceData Summary
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 7 Revised: July 24, 2020 1:30 PM
Carrier O.D. /System Type
SPF / Phasing(tested)
Maximum Pressure(psi) [MPa]
Maximum Tensile*(lbf)[kN]
Charge Size/Type Charge Part Number Perforating Condition
API Maximum Gun Swell
(in)[mm]4” HF Series 6 shot HELLFire™ 15,000 [103] 318,000 [1414] 12.0g, RDX, HELLFire™ EC2-40K1271 Fluid 4.60 [116.84]
4” GA Series4 spf / 60°
19,700 [135] 434,400 [1932]39.0g, HMX, Razor® XDP EC2-40A3922
Fluid 4.16 [105.66]4 spf / 60° 39.0g, HMX, Connex® EC2-40A3922-RC
4-1/2” GA Series
5 spf / 60°17,700 [122]
517,800 [2303]
39.0g, HMX, Razor XDP EC2-40A3922
Fluid4.67 [118.62]
5 spf / 60° 39.0g, HMX, Connex EC2-40A3922-RC12 spf / 135°-45°
17,200 [118]22.7g, HMX, Razor XDP EC2-33A3922 4.64 [117.86]
12 spf / 135°-45° 22.7g, HMX, Connex EC2-33A3922-RC 4.69 [119.13]
4-5/8” GA Series, Standard5 spf / 60° 18,900 [130] 454,600 [2022] 39.0g, HMX, Razor XDP EC2-40A3922 Fluid 4.67 [118.62]
16 spf / 140°-20° 18,900 [130] 454,600 [2022]26.0g, RDX, Razor EC2-46A2631 Fluid 4.81 [122.17]
4-5/8” GA Series, HP 16 spf / 140°-20° 20,000 [138] 465,300 [2069]5” GA Series 12 spf / 135°-45° 15,400 [106] 358,400 [1594] 32.0g, RDX, Razor SBH EC2-51A3231 Fluid 5.19 [131.83]
5-1/8” GA Series16 spf / 140°-20° 17,200 [118]
461,800 [2054]32.0g, RDX, Razor SBH EC2-51A3231
Fluid5.33 [135.38]
22 spf / 140°-20° 15,400 [106] 19.0g, RDX, Razor See Catalog Pages 5.34 [135.64]7” GA Series, GH and DP
12 spf / 135°-45° 13,500 [93]
770,700 [3428]
39.0g, RDX, Razor EC2-40A3922Fluid
7.28 [184.91]7” GA Series, SBH 52.0g, RDX, Razor SBH EC2-70C5231 7.15 [181.61]
7” GA Series, Standard, SBH15 spf / 140°-20°
13,500 [93]52.0g, RDX, Razor SBH EC2-70C5231 Fluid 7.23 [183.64]
7” GA Series, HP, SBH 14,600 [100]7” GA Series, SBH
Channel Finder, 360°18 spf / 90°
Rotated Cluster 11,500 [79]39.0g, RDX, Razor SBH EC2-70K3931
Fluid 7.22 [183.39]52.0g, RDX, Razor SBH EC2-70K5232
7” Eclipse, SBH20 spf / 90°-45°
11,500 [79]39.0g, RDX, Razor SBH EC2-70K3931
Fluid 7.22 [183.39]20 spf / 90°-45° 52.0g, RDX, Razor SBH EC2-70K5232
*Hardware calculated breaking pointFLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Mechanical PerformanceData Summary
Page 8 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 9 Revised: July 24, 2020 1:30 PM
General Data on ExplosivesTemperature vs. Exposure Time Chart
650
600
550
500
450
400
350
300
250
200
15011 0 Time, Hr
Tem
pera
ture
°F
100 1000
HNSRDX
PYXHMX
Contact GEODynamics for recommenda�ons and possibleneed for tes�ng on systems that fall within this range
GEODynamics manufactures and supplies an extensive line of high quality, high performance explosive products for use in oil and gas well completions. These products include:
● Shaped charges ● Primer cords (Primacord™) ● Detonators ● Cutters and severing tools ● Setting tools
When loading perforating guns, the explosive materials used in primer cord and shaped charges should be matched. For example, when using HMX shaped charges, HMX primer cord should be used.
Explosives Supplied by GEODynamics
The following chart illustrates the maximum temperature and exposure time above which explosive material will exhibit significant degradation and performance will suffer. Effects should be considered irreversible and exposure time is therefore cumulative in case multiple exposure periods occur.
Temperature vs. Exposure Time for Common Explosive Materials
RDX (Cyclotrimethylene Trinitramine)
Economical material with good performance. RDX is usually pink in color. Maximum application temperature* is 325°F for one hour or less. Density is 1.82 g/cc. Melting point is 399°F. Detonation velocity is approximately 28,709 ft/sec.
HMX (Cyclotetramethylene Trinitramine)
Used when an explosive with a higher temperature rating and higher performance than RDX is required. HMX is usually white in color. Maximum application temperature* is 400°F for one hour or less, although application above the crystalline transition temperature of 300°F is strongly discouraged. Density is 1.9 g/cc. Melting point is 536°F. Detonation velocity is approximately 29,857 ft/sec.
HNS (Hexanitrosilbene)
Used for applications in which the material will be subjected to high temperatures. HNS is substantially more expensive than RDX or HMX. Performance is less than that of RDX or HMX and somewhat less than that of PYX. HNS is usually pale yellow in color. Maximum application temperature* is 520°F for one hour or less. Density is 1.75 g/cc. Melting point is 600°F. Detonation velocity is approximately 22,967 ft/sec.
PYX (Bis Dinotropyridine)
Used for very high temperature applications. PYX is expensive. Performance is less than that of RDX or HMX but somewhat better than that of HNS. PYX is usually deep yellow in color. Maximum application temperature* is 600°F for one hour or less. Density is 1.75 g/cc. Melting point is 860°F. Detonation velocity is approximately 23,623 ft/sec.
*See chart for maximum application temperature ranges
Common Explosive Materials Used in Charges and Primer Cords
Page 10 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 11 Revised: July 24, 2020 1:30 PM
Shaped ChargesBasix™ Good Hole, Big Hole, and Super Big Hole
GEODynamics Basix™ delivers impressive quality at an equally impressive price point. High-performing and budget-conscious Basix takes conventional shaped charge technology and kicks it up a notch. Basix charges are available for good hole, big hole, super big hole, and deep-penetration perforating applications.
Basix Frac delivers constant entry hole and penetration for limited entry perforating applications.
‡ For 3-1/8” 19g in dry gas, maximum shot density is 5 spf or limited to one- (1) and two- (2) shot short guns only. † For 5-1/8” 12 spf, max. explosive load is 22.7g; 33A charge case must be grooved. For 22 spf, max. explosive load is 19g; refer to catalog pages for 5-1/8” 22 spf, GH & DP charges.^ EC2-40A3941-C is a speciality charge for multi-string casing scenarios.* Performance test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only. IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
2” 2007 Basix GH EC1-20A0742 In Fluid or Dry 6.8g, HMX
3-1/8”3319 Basix GH EC2-33A1941 ‡ Fluid or Dry 19.0g, RDX3323 Basix GH EC2-33A2341 Fluid 22.7g, RDX
3-3/8”3323 Basix GH EC2-33A2341 In Fluid or Dry 22.7g, RDX3325 Basix GH EC2-33B2541 Fluid 25.0g, RDX
5-1/8” 3319 Basix GH EC2-33A1941-EG Fluid † 19.0g, RDX
7” 4039 Basix GHEC2-40A3941
Fluid39.0g, RDX
^ EC2-40A3941-C 39.0g, RDX
3-1/8”3323 Basix BH
EC2-33A2331Fluid
22.7g, RDXEC2-33A2332 22.7g, HMX
3112 Basix SBH EC2-31B1231 12.0g, RDX
3-3/8”3323 Basix BH EC2-33A2331
Fluid22.7g, RDX
3112 Basix SBH EC2-31B1231 12.0g, RDX
4-1/2”4039 Basix BH EC2-40A3931
Fluid39.0g, RDX
3323 Basix BH EC2-33A2331 22.7g, RDX4-5/8” 4526 Basix SBH EC2-45B2631 Fluid 26.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 0° 3-1/2 [8.89] 0.36 [0.91] 20.52 [52.12] API RP 43
6 spf / 60° 4-1/2 [11.43]0.60 [1.52] 28.55 [72.52] API RP 43
* * *
6 spf / 60° 4-1/2 [11.43]0.52 [1.32] 33.58 [85.29]
API RP 430.57 [1.45] 25.91 [65.81]
12 spf / 135°-45° 7-5/8 [19.37] * * *
12 spf / 135°-45° 9-5/8 [24.45]0.80 [2.03] 15.42 [39.17] API RP 430.50 [1.27] 28.00 [71.12] QC
6 spf / 60° 4-1/2 [11.43]* * ** * *
12 spf/135°-45° 5.0 [12.70] 0.70 [1.78] 5.23 [13.28] API RP 436 spf / 60° 7.0 [17.78] 0.74 [1.88] 7.13 [18.11] API RP 43
12 spf/135°-45° 5-1/2 [13.97] 0.71 [1.80] 4.60 [11.68] API RP 435 spf / 60°
7.0 [17.78]0.86 [2.18] 6.13 [15.57] API RP 43
12 spf/135°-45° 0.74 [1.88] 7.13 [18.11] API RP 4316 spf/ 140°-20° 7.0 [17.78] 0.94 [2.39] 6.27 [15.93] API RP 43
Good Hole
Big Hole and Super Big Hole
Page 12 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Shaped ChargesBasix™ Extreme Deep Penetrating and Basix™ Frac Constant Entry Hole
‡ For 3-1/8” 19g in dry gas, maximum shot density is 5 spf or limited to one- (1) and two- (2) shot short guns only. † For 5-1/8” 12 spf, max. explosive load is 22.7g; 33A charge case must be grooved. For 22 spf, max. explosive load is 19g; refer to catalog pages for 5-1/8” 22 spf, GH & DP charges.* Performance test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information. FLUID: Qualified for shooting in FLUID only. IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
2-3/8” 2311 Basix XDP EC2-23A1121-E Fluid 11.0g, RDX2-1/2” 2511 Basix XDP EC2-25A1121-E Fluid 11.5g, RDX2-3/4” 2715 Basix XDP EC2-27A1521 In Fluid or Dry 15.0g, RDX2-7/8” 2818 Basix XDP EC2-28A1821 Fluid 18.0g, RDX
3-1/8
3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 19.0g, RDX
3323 Basix XDP EC2-33A2321 Fluid 22.7g, RDXEC2-33A2321-E 22.7g, RDX
3-3/8”
3323 Basix DP EC2-33A2351 In Fluid or Dry 22.7g, RDX3323 Basix XDP EC2-33A2321-E 22.7g, RDX
3325 Basix XDP EC2-33B2521-E Fluid 25.0g, RDXEC2-33B2521 25.0g, RDX
4” 4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX4-1/2” 4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX
5-1/8” 3323 Basix XDP EC2-33A2321-E Fluid † 22.7g, RDX3319 Basix DP EC2-33A1951 † 19.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 3-1/2 [8.89] 0.30 [0.76] 9.00 [22.86] API RP 19B Sec. 26 spf /60° 3-1/2 [8.89] 0.30 [0.76] 9.10 [23.11] API RP 19B Sec. 2 6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 436 spf /60° 4-1/2 [11.43] 0.43 [1.09] 40.05 [101.73] API RP 43
6 spf / 60° 4-1/2 [11.43]
0.43 [1.09] 35.80 [90.93] API RP 430.51 [1.30] 42.07 [106.86] API RP 430.54 [1.37] 29.20 [74.17] QC
* * *0.42 [1.07] 46.01 [116.87] API RP 43
6 spf / 60° 4-1/2 [11.43]
0.47 [1.19] 32.10 [81.53] QC0.45 [1.14] 46.32 [117.65] API RP 430.45 [1.14] 50.08 [127.20] API RP 430.45 [1.14] 44.58 [113.23] API RP 43
4 spf / 60° 5-1/2 [13.97] 0.39 [0.99] 53.00 [134.62] API RP 435 spf / 60° 7.0 [17.78] 0.44 [1.12] 62.90 [159.77] API RP 43
12 spf / 135°-45° 7-5/8” [19.37] * * *22 spf / 140°-20° 7-5/8” [19.37] * * *
Extreme Deep Perforating
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
3-1/8”
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2
(in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9 %0.50 [1.27] 4.8 %
Basix™ Frac Constant Entry Hole and Penetration
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 13 Revised: July 24, 2020 1:30 PM
Shaped ChargesConnex®
GEODynamics Connex® delivers clean, open tunnels independent of rock type. Every tunnel receives its own cleaning action, independent of other perforations, resulting in a much greater percentage of clean tunnels and ideal flow path between undamaged reservoir and the wellbore. Connex charges use reactive metals to create a secondary reaction to clear out the compaction zone in a perforating zone. Patented charge liner material deposited along the tunnel reacts exothermically when introduced to heat and pressure. This reaction creates significant pressure within and around the tunnel, breaking up and expelling the crushed zone compacted debris back into the well bore. In sufficiently competent rock, fractures are also formed at the tunnel tip.
‡ For 2-3/8” in dry gas, maximum shot density is 5 spf and limited to low-swell (LS) charges only. Refer to catalog pages for more details.‡ For 3-1/8” 19g in dry gas, maximum shot density is 5 spf or limited to one- (1) and two- (2) shot short guns only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Performance test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
2”2007 Connex EC2-20A0722-RC Fluid 6.8g, HMX
2007 Connex XLS EC2-20B0722-RC In Fluid or Dry 6.5g, HMX
2-3/8”2311 Connex EC2-23A1122-RC Fluid 11.0g, HMX
2311 Connex XLS EC2-23A1122-RC-LS ‡ Fluid or Dry 10.5g, HMX2-1/2” 2511 Connex EC2-25A1122-RC Fluid 11.5g, HMX2-3/4” 2715 Connex EC2-27A1522-RC In Fluid or Dry 15.0g, HMX
2-7/8”2715 Connex EC2-27A1522-RC
In Fluid or Dry15.0g, HMX
2715 Connex XEH EC2-27A1542-RC 15.0g, HMX2818 Connex EC2-28A1822-RC Fluid 18.0g, HMX
3-1/8”
3319 Connex XEHEC2-33A1941-RC
‡ Fluid or Dry19.0g, RDX
EC2-33A1942-RC 19.0g, HMX
3319 Connex RXEC2-33A1991-RX
‡ Fluid or Dry19.0g, RDX
EC2-33A1992-RX 19.0g, HMX
3323 ConnexEC2-33A2321-RC
Fluid22.7g, RDX
EC2-33A2322-RC 22.7g, HMX
3323 Connex XEHEC2-33A2341-RC
Fluid22.7g, RDX
EC2-33A2342-RC 22.7g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm]Entrance
Hole (in)[cm]Entrance
Hole (in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 2-7/8 [7.30]0.26 [0.66] 0.22 [0.56] 9.37 [23.80]0.26 [0.66] 0.22 [0.56] 9.37 [23.80]
‡ 6 spf / 60° 3-1/2 [8.89]0.35 [0.89] 0.31 [0.79] 11.35 [28.83]0.35 [0.89] 0.31 [0.79] 11.35 [28.83]
6 spf / 60° 3-1/2 [8.89] 0.34 [0.86] 0.31 [0.79] 11.50 [29.21]6 spf / 60° 4-1/2 [11.43] 0.39 [0.99] 0.34 [0.86] 12.18 [30.94]
6 spf / 60° 4-1/2 [11.43]0.39 [0.99] 0.34 [0.86] 12.18 [30.94]0.44 [1.12] 0.35 [0.89] 11.60 [29.46]0.45 [1.14] 0.40 [1.02] 14.02 [35.61]
6 spf / 60° 4.5 [11.43]
* * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
* * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]0.40 [1.02] * 15.60 [39.62]0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
* * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
Page 14 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Shaped ChargesConnex®
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
3-3/8”
3319 Connex RX EC2-33A1992-RXIn Fluid or Dry
19.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2342-RC 22.7g, HMX3325 Connex EC2-33B2522-RC
Fluid25.0g, HMX
3325 Connex XEH EC2-33B2542-RC 25.0g, HMX
4”3323 Connex EC2-33A2322-RC
Fluid22.7g, HMX
4039 Connex EC2-40A3922-RC 39.0g, HMX
4-1/2”3323 Connex EC2-33A2322-RC
Fluid22.7g, HMX
4039 Connex EC2-40A3922-RC 39.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
4-5/8” 3323 Connex EC2-33A2322-RC Fluid 22.7g, HMX7” 4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm]Entrance
Hole (in)[cm]Entrance
Hole (in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
5-1/2 [13.97] 0.42 [1.07] 0.32 [0.81] 11.60 [29.46]
4-1/2 [11.43]0.47 [1.19] 0.46 [1.17] 15.31 [38.89]0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
4-1/2 [11.43]0.53 [1.35] 0.48 [1.22] 15.45 [39.24]0.54 [1.37] 0.40 [1.02] 14.92 [37.90]
6 spf / 60°5-1/2 [13.97]
0.46 [1.17] 0.46 [1.17] 15.31 [38.89]4 spf / 60° 0.49 [1.24] 0.44 [1.12] 17.65 [44.83]6 spf / 60° 5-1/2 [13.97] 0.46 [1.17] 0.46 [1.17] 15.31 [38.89]5 spf / 60°
7.0 [17.78]0.46 [1.17] 0.44 [1.12] 17.65 [44.83]
12 spf/135°-45° 0.40 [1.02] 0.46 [1.17] 15.31 [38.89]12 spf/135°-45° 7.0 [17.78] 0.40 [1.02] 0.46 [1.17] 15.31 [38.89]12 spf/135°-45° 9-5/8 [24.45] 0.44 [1.12] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Performance test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information. FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 15 Revised: July 24, 2020 1:30 PM
Shaped ChargesFracIQ®
GEODynamics delivers a Limited Entry Perforating System for unconventional reservoirs. FracIQ® provides constant casing hole sizes, regardless of decentralized position, casing size, weight, and grade, for optimal pressure drop during Frac. With a constant entry hole and penetration, each cluster can be treated more efficiently. Subsequent stages and wells can then be further optimized for limited entry fracture stimulation. FracIQ provides superior perforation efficiency during fracture stimulation when compared to conventional perforators which traditionally exhibit a higher entry hole diameter variance across shot phasings.
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing. LD designates low debris charges.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information. FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
2-3/4”FracIQ 30 EC2-27A1171
Fluid11.0g, RDX
FracIQ 35 EC2-27A1271 12.0g, RDXFracIQ 40 EC2-27A1571 15.0g, RDX
2-7/8”FracIQ 35 EC2-28A1171
Fluid
11.0g, RDXEC2-28A1172 11.0g, HMX
FracIQ 40 EC2-28A1671 16.0g, RDXEC2-28A1672 16.0g, HMX
3-1/8”
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDX
3-1/8”FracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
3-3/8” FracIQ 20 EC2-33A1271 Fluid 12.0g, RDXFracIQ 25 EC2-33A1371 Fluid 13.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” OD P1100.30 [0.76] 2.7 %
5.0 [12.70]0.35 [0.89] 5.9 %0.40 [1.02] 6.3 %
6 spf / 60° 4.5” OD P110
0.36 [0.91] 3.3 %
5.0 [12.70]0.36 [0.91] 2.1 %0.40 [1.02] 2.7 %0.40 [1.02] 2.7 %
6 spf / 60°
4.5”-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1 %0.31 [0.79] 3.1 %0.34 [0.86] 3.8 %0.36 [0.91] 2.5 %0.37 [0.94] 3.0 %0.40 [1.02] 3.3 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5”-5.5” OD 0.50 [1.27] 1.5 %
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8 %
6 spf / 60° 4.5”-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91] 2.5 %0.40 [1.02] 3.3 %
6 spf / 60° 4.5”-5.5” OD 0.22 [0.56] 5.5% 5.0 [12.70]6.0” OD P110 0.26 [0.66] 2.3 %
Page 16 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 17 Revised: July 24, 2020 1:30 PM
Shaped ChargesHELLFire®
HELLFire® allows more effective multi-stage plug-and-perf operations. HELLFire’s three- or six-shot cluster options unlock stage completions not possible with lengthy conventional spiral-phased technology. The short-bodied HELLFire system minimizes wireline tool string length and delivers more clusters per stage. HELLFire’s flexible design options allow engineers to specify ideal cluster count and spacing, resulting in lower costs, fewer stages, maximized injectivity, and optimal proppant placement, all with less equipment and a smaller crane.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier OD Product Name Part Number Perforating
Condition Explosive
3-1/8” External Scallops
HELLFire 26 EC2-31K0671-26
Fluid
6.0g, RDXHELLFire 28 EC2-31K0671-28 6.0g, RDXHELLFire 33 EC2-31K0771-33 7.0g, RDXHELLFire 36 EC2-31K0771-36 7.0g, RDXHELLFire 42 EC2-31K0771-42 7.0g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shotsper cluster 4.5” OD, P110
0.26 [0.66] 7.4 %
3.2 [8.13]0.28 [0.71] 5.5 %0.33 [0.84] 2.9 %0.36 [0.91] 1.6 %0.42 [1.07 ] 3.8 %
IMPORTANT: HELLFire 31K charges are NOT interchangeable with 33K charges. EC2-33K series are for 3-3/8” HELLFire only.
4” Internal Scallops
HELLFire 40 EC2-40K1271 Fluid 12.0g, RDX 1 to 6 shotsper cluster
6.0” OD, 26# P-110 0.40 [1.02] 3.9% 3.00 [7.62]
3-3/8” Internal Scallops
HELLFire 25 EC2-33K0571Fluid
5.0g, RDXHELLFire 30 EC2-33K0771 7.0g, RDXHELLFire 36 EC2-33K0771-RX 7.0g, RDX
3-3/8” External Scallops
HELLFire 25 EC2-33K0671-25
Fluid
6.0g, RDXHELLFire 30 EC2-33K0771-30 7.0g, RDXHELLFire 33 EC2-33K0771-33 7.0g, RDXHELLFire 34 EC2-33K0771-34 7.0g, RDX
1 to 6 shotsper cluster
5.5” - 6.0” OD, P-110
0.25 [0.64] 4.3 %3.5 [8.89]0.30 [0.76] 2.7 %
0.36 [0.91] 4.6 %
1 to 6 shotsper cluster 5.5” OD, P-110
0.25 [0.64] 3.90%
3.5 [8.89]0.30 [0.76] 5.50%0.33 [0.84] 3.60%0.34 [0.86] 5.80%
IMPORTANT: HELLFire 33K charges are NOT interchangeable with 31K charges. EC2-31K series are for 3-1/8” HELLFire only.
Page 18 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 19 Revised: July 24, 2020 1:30 PM
Shaped ChargesGEOPunch™ DUB Punchers and Circulating Charges (Tubing Punchers)
The GEOPunch™ charge minimizes or eliminates perforation damage by optimizing the well’s dynamic underbalance, which is the transient underbalance that occurs just after creation of the perforation cavity. Proprietary design software specifies a custom perforating configuration and the optimal completion process. This approach generates and controls the dynamic underbalance, rather than relying on the estimated reservoir pressure to create underbalance.
GEOPunch perforating is successfully performed in hard- and soft-rock formations, oil and gas reservoirs, and sandstones and carbonates and it also minimizes disruption of the cement/sandface hydraulic bond.
Please contact your sales representative for additional charge options or more information.
Carrier O.D. Product Name Part Number Explosive Exit Hole(in)[cm]
2-3/4”, 2-7/8”2708 GEOPunch RDX EC2-27A0861 8.0g, RDX
1.05 [2.67]2708 GEOPunch HMX EC2-27A0862 8.0g, HMX2708 GEOPunch HNS EC2-27A0863 8.0g, HNS
2-7/8”2808 GEOPunch RDX EC2-28A0861 8.0g, RDX
1.05 [2.67]2808 GEOPunch HMX EC2-28A0862 8.0g, HMX2808 GEOPunch HNS EC2-28A0863 8.0g, HNS
3-1/8”, 3-3/8”3308 GEOPunch RDX EC2-33A0861 8.0g, RDX
1.05 [2.67]3308 GEOPunch HMX EC2-33A0862 8.0g, HMX3308 GEOPunch HNS EC2-33A0863 8.0g, HNS
4”, 4-1/2”, 7”4008 GEOPunch RDX EC2-40A0861 8.0g, RDX
1.05 [2.67]4008 GEOPunch HMX EC2-40A0862 8.0g, HMX4008 GEOPunch HNS EC2-40A0863 8.0g, HNS
Circulating Charges (Tubing Punchers) Explosive(g), load
Tubing/Drill Pipe Wall Thickness (in)[cm]
Entrance Hole (in)[cm]
Penetration (in)[cm]Carrier O.D. Part Number
1-9/16”
TG39CS2 2.7g, HMX0.190 [0.4826] 0.45 [1.1430]
<=0.100 [0.254]0.375 [0.9525] 0.31 [0.7874]
TG39CM2 3.4g, HMX0.375 [0.9525] 0.43 [1.0922 ]
<=0.100 [0.254]0.500 [1.2700] 0.24 [0.6096 ]
TG39CL2 3.4g, HMX0.500 [1.2700] 0.21 [0.5334 ]
<=0.100 [0.254]0.580 [1.4732] 0.18 [0.4572 ]
TG39CM2-78 3.4g, HMX0.625 [1.5875] 0.28 [0.7112 ]
<=0.100 [0.254]0.785 [1.9939 ] 0.17 [0.4318 ]
TG39CL2-88 3.4g, HMX0.750 [1.9050 ] 0.20 [0.5080 ]
<=0.100 [0.254]0.885 [2.2479] 0.17 [0.4318 ]
Contact GEODynamics Engineering for recommendations and phasing options.
Page 20 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 21 Revised: July 24, 2020 1:30 PM
Shaped ChargesRazor® Extreme Deep Penetrating
GEODynamics Razor® delivers industry-leading shaped charge performance, achieved by combining cutting-edge designs, state-of-the-art production processes, and rigorous quality control. When it is critical that your perforation tunnel escapes near-wellbore damage and contacts the formation, Razor XDP’s best-in-class penetration pushes your perforations to new depths. When the amount of area open to flow is critical, Razor SBH leads the way with the industry’s largest entry hole and flow area performance.
‡ For 2-3/8” in dry gas, maximum shot density is 5 spf and limited to low-swell (LS) charges only. Refer to catalog pages for more details.‡ For 3-1/8” 19g in dry gas, maximum shot density is 5 spf or limited to one- (1) and two- (2) shot short guns only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only. IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
1-9/16”1503 Razor XDP EC1-15A0322
In Fluid or Dry 3.2g, HMXFluid 3.2g, HMX
1503 Razor XDP EC1-15A0322-L Dry 2.9g, HMX1-3/4” 1705 Razor XDP EC1-17A0522 Fluid 5.1g, HMX
2”2007 Razor XDP EC1-20A0722 Fluid 6.8g, HMX
2007 Razor XLS XDP EC1-20B0722 In Fluid or Dry 6.5g, HMX
2-3/8”2311 Razor XDP EC2-23A1122 Fluid 11.0g, HMX
2311 Razor XDP LS EC2-23A1122-LS ‡ Fluid or Dry 11.0g, HMX2-1/2” 2511 Razor XDP EC2-25A1122 Fluid 11.5g, HMX2-3/4” 2715 Razor XDP EC2-27A1522 In Fluid or Dry 15.0g, HMX
2-7/8”2715 Razor XDP EC2-27A1522 In Fluid or Dry 15.0g, HMX2818 Razor XDP EC2-28A1822 Fluid 18.0g, HMX
3-1/8”3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDPEC2-33A2322
Fluid 22.7g, HMXEC2-33A2322-E
3-3/8”3323 Razor XDP EC2-33A2322 In Fluid or Dry 22.7g, HMX3325 Razor XDP EC2-33B2522 Fluid 25.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 0°2-7/8 [7.30]
0.19 [0.48] 13.09 [33.25] API RP 436 spf / 60° 0.19 [0.48] 13.09 [33.25] API RP 436 spf / 0° 0.19 [0.48] 12.80 [32.51] API RP 436 spf / 0° 4-1/2 [11.43] 0.26 [0.66] 21.63 [54.94} API RP 43
6 spf / 60° 2-7/8 [7.30]0.25 [0.64] 22.30 [56.64] API RP 19B0.25 [0.64] 22.30 [56.64] API RP 43
6 spf / 60°3-1/2 [8.89]
0.31 [0.79] 30.11 [76.48] API RP 43‡ 6 spf / 0° 0.31 [0.79] 30.11 [76.48] API RP 436 spf /60° 3-1/2 [8.89] 0.32 [0.81] 31.10 [78.99] API RP 19B6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 436 spf /60°
4-1/2 [11.43]0.34 [0.86] 35.10 [89.15] API RP 19B
6 spf /60° 0.43 [1.09] 40.05 [101.73] API RP 43
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 430.42 [1.07] 39.02 [99.11] API RP 430.42 [1.07] 39.02 [99.11] API RP 43
6 spf / 60° 4-1/2 [11.43]0.45 [1.14] 46.32 [117.65] API RP 430.53 [1.35] 47.30 [120.14] API RP 19B
Extreme Deep Perforating
Page 22 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Shaped ChargesRazor® Super Big Hole
1 Blank charge case P/N: EP-1085-100-D (4-1/2” BH LD, zinc). Charge case 46B is steel; charge case 46A is zinc. ^ Heavy weight 7-5/8” 47.1# Q-110 casing used in lieu of 7-5/8” 33.7# L-80 (with 5” gun system).** Razor SBH charges are available in steel case designs upon request.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only. IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
3-3/8” 3112 Razor SBH EC2-31B1231 Fluid 12.0g, RDX
4-5/8”4626 Razor SBH 1 EC2-46B2631
Fluid26.0g, RDX
4626 Razor SBH TL LD 1 EC2-46A263126.0g, RDX26.0g, RDX
5” 5132 Razor SBH TL LD EC2-51A3231 Fluid 32.0g, RDX5-1/8” 5132 Razor SBH TL LD EC2-51A3231 Fluid 32.0g, RDX
7”
7039 Razor SBH TL LD EC2-70C3931
Fluid
39.0g, RDX7052 Razor SBH TL LD EC2-70C5231 52.0g, RDX
7039K Razor SBH EC2-70K3931 39.0g, RDX
**7052K Razor SBHEC2-70K5231 52.0g, RDXEC2-70K5232 52.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 150°-30° 5-1/2 [13.97] 0.71 [1.80] 5.88 [14.94] API RP 43
16 spf/ 140°-20°7” [17.78]
0.94 [2.39] 6.27 [15.93] API RP 430.90 [2.29] 5.50 [13.97] API RP 19B
7-3/4” [19.69] 0.96 [2.44] 5.40 [13.72] API RP 19B16 spf / 140°-20° ^ 7-5/8” [19.37] 1.04 [2.64] 6.70 [17.02] API RP 19B16 spf / 140°-20° 7-5/8” [19.37] 1.07 [2.72] 6.60 [16.76] API RP 19B
15 spf / 140°-20°
9-5/8” [24.45]
1.24 [3.15] 7.08 [17.98] API RP 431.39 [3.53] 6.50 [16.51] API RP 19B
20 spf / 90°-45°1.04 [2.64] 6.31 [16.03] API RP 19B1.40 [3.56] 5.35 [13.59] API RP 19B1.42 [3.61] 7.06 [17.93] API RP 43
Super Big Hole
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
4”4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX3325 Razor XDP EC2-33B2522 In Fluid or Dry 25.0g, HMX
4-1/2”4039 Razor XDP EC2-40A3922
Fluid39.0g, HMX
3323 Razor XDP EC2-33A2322 22.7g, HMX4-5/8” 3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMX
5-1/8”3319 Razor DP EC2-33A1941-G
Fluid19.0g, RDX
3323 Razor XDP † EC2-33A2322 † 22.7g, HMX7” 4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 90°5-1/2 [13.97]
0.39 [0.99] 53.00 [134.62] API RP 19B6 spf / 60° 0.47 [1.19] 46.11 [117.12] API RP 435 spf / 60°
7” [17.78]0.44 [1.12] 62.90 [159.77] API RP 19B
12 spf / 135°-45° 0.38 [0.97] 34.90 [88.65] API RP 19B12 spf / 135°-45° 7” [17.78] 0.38 [0.97] 34.90 [88.65] API RP 19B
12 spf / 135°-45° 7-5/8” [19.37]* * ** * *
12 spf / 135°-45° 9-5/8” [24.45] 0.41 [1.04] 53.60 [136.14] API RP 43
Extreme Deep Perforating, cont.
† Maximum explosive load 22.7g for 12spf; 33A charge case must be grooved. For 22 spf, Razor 19g charges, refer to catalog pages for the 5-1/8” 22 spf, GH and DP system.* Performance test results pending.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 23 Revised: July 24, 2020 1:30 PM
Shaped ChargesRefrax™
GEODynamics Refrax™ shaped charges allow operators to optimize depleted wells while providing constant entry hole size and penetration through two strings of casing. Initially, this technology was developed for clients utilizing expandable liners inside existing casing. Now, the perforating system has been further developed for various refracturing applications with several entry hole diameter (EHD) options. The system’s performance is independent of gun position, casing specifications, or target formation. Perforating performance results in optimal pressure diversion and repeatable breakdown pressures that ultimately correlates to better fracturing treatments, lower costs, and more productive wells.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
2-3/8” 2311 Refrax EC2-23A1171-R Fluid 11.0g, RDX
2-1/2” 2511 Refrax EC2-25A1171-R Fluid 11.0g, RDX
2-3/4”2711 Refrax EC2-27A1171-R
Fluid11.0g, RDX
2715 Refrax EC2-27A1571-R 15.0g, RDX
3-1/8”
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX
3316 Refrax EC2-33A1671-D 16.0g, RDX
3320 Refrax EC2-33A2071-D 20.0g, RDX
3316 Refrax EC2-33A1671-D 16.0g, RDX
3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 3.5” P110 0.33-0.38 [0.84-0.95] 4.5” P110 0.33-0.35 [0.84-0.89]
6 spf / 60° 3.5” P110 0.38-0.42 [0.97-1.07] 5.5” P110 0.33-0.35 [0.84-0.89]
6 spf / 60°4.0” P110
0.29-0.30 [0.74-0.76]5.5” P110
0.37-0.41 [0.94-1.04]
6 spf / 60° 0.34-0.36 [0.86-0.91] 0.34-0.42 [0.86-1.07]
6 spf / 60° Expanded 4.0” P110
0.33-0.33 [0.84-0.84]
5.5” P110
0.30-0.30 [0.76-0.76]
0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]
0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
6 spf / 60° 4.5” P1100.30-0.32 [0.76-0.81]
7.0” P1100.39-0.41 [0.99-1.04]
0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
Page 24 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 25 Revised: July 24, 2020 1:30 PM
Shaped ChargesSandIQ®
GEODynamics’ SandIQ® charges provide an “off ramp” for more efficient diversion of proppant. Perforating tunnels are tilted 45 degrees in direction of fluid flow. Angled holes are engineered to create a physical diversion on toe side of casing for proppant to naturally flow into the formation. SandIQ shaped charges are engineered to produce precision holes in casing size, weights, and grades which are used in unconventional wells.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.FLUID: Qualified for shooting in FLUID only.IN FLUID or DRY: Qualified for shooting in FLUID or DRY GAS.
Carrier O.D. Product Name Part Number Perforating
Condition Explosive
3-1/8”
SandIQ B EC2-33A1371-SB
Fluid
13.0g, RDX
SandIQ C EC2-33A1671-SC 16.0g RDX
SandIQ D EC2-33A1671-SD 16.0g, RDX
SandIQ E EC2-33A2071-SE 20.0g, RDX
SandIQ F EC2-33A2371-SF 23.0g, RDX
SandIQ G EC2-33A2371-SG 23.0g, RDX
3-1/8”
SandIQ D EC2-33A1672-SD
Fluid
16.0g, HMX
SandIQ E EC2-33A2072-SE 20.0g, HMX
SandIQ F EC2-33A2372-SF 23.0g, HMX
API PerformancePhasing /
Charge Tilt Angle
API 19B Targeted
Pipe*
Nominal Entry Hole
(in)[cm]
Casing Entry Hole at 45°
(in)[cm]
EHD Variation Decentralized
at 45°
Rock Penetration API 19B-Sec. 2
(in)[cm]
60° / 45° 5.5” ODP-110
0.25 [0.64] 0.28 [0.71] 4.2 %
5.0 [12.70]
0.30 [0.76] 0.31 [0.79] 3.8 %
0.35 [0.89] 0.38 [0.97] 2.6 %
0.40 [1.02] 0.42 [1.07] 3.7 %
0.45 [1.14] 0.44 [1.12] 1.0 %
0.50 [1.27] 0.51 [1.30] 5.2 %
60° / 45° 5.5” OD P-110
0.35 [0.89] 0.35 [0.89] 1.7 %
5.0 [12.70]0.40 [1.02] 0.41 [1.04] 4.8 %
0.45 [1.14] 0.43 [1.09] 6.0 %*3-1/8” SandIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
Page 26 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 27 Revised: July 24, 2020 1:30 PM
Detonators, Detonating Cord, and AccessoriesDetonators and Detonating Cords
Detonator, electric, a-140SDET-E-A140S
Part Number DescriptionDET-E-A105 Detonator, Electric, A105DET-E-A140 Detonator, Electric, A-140 w/block (219192)
DET-E-A140F Detonator, Electric, A-140F w/ blockDET-E-A140F-SL Detonator, Electric, A-140F w/ 6.5" leads and block
DET-E-A140S Detonator, Electric, A-140S Fluid Disabled Resistorized Instantaneous RDXDET-E-A140S-DM Detonator, Electric, A-140S Fluid Disabled Resistorized Instantaneous RDX, DM
DET-E-A161 Detonator, Electric, A-161DET-E-A85 Detonator, Electric, A85DET-E-A96L Detonator, Electric, A96L
DET-E-RJ-208-FD Detonator, Fluid Disabled, HNS, AluminumDET-E-RJ-210 Detonator, Fluid Disabled, RDX (RJ-210)
DET-E-RJ-211-N Detonator, Electric, RDX, RJ-211, Crimp Type, Fluid Desensitized, Non-InterruptingDET-E-RJ-211A Detonator, Crimp-on, 16” Leads, Fluid Disabled, RDX (RJ-211), AluminumDET-E-RJ-215 Detonator, Fluid Disabled, RDX (RJ-215)
DETONATORS
Part Number DescriptionDET-100000-363 40g HMX LS Ribbon
DET-40H212 Detonating Cord, 40 grain HMX LS (Detotec)DET-40H512 Detonating Cord, 40 grain HMX LS Ribbon (Detotec)DET-40I511 Detonating Cord, 40 grain Ribbon InertDET-40R211 Detonating Cord, 40 grain RDX LS (Detotec)DET-40R511 Detonating Cord, 40 grain RDX LS Ribbon (Detotec)
DET-A545010 Detonating Cord, 40 grain HMX RibbonDET-A574010 Detonating Cord, 60 Gr HMX LSDET-A574017 Detonating Cord, 60 Gr HMX LS FirePak 1.4SDET-60H212 Detonating Cord, 60 grain HMX LS (Detotec)DET-70H212 Detonating Cord, 70 grain HMX LS (Detotec)
DET-80H Detonating Cord, 80 HMX, roundDET-80H112 Detonating Cord, 80 grain HMX LS Zytel (Detotec)DET-80H212 Detonating Cord, 80g HMX LS Zytec
DETONATING CORDS, DOMESTIC USE
Page 28 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Detonators, Detonating Cord, and AccessoriesDetonating Cords and Accessories
Part Number DescriptionDET-0000-036 Primacord CutterDET-0000-050 Scale 12” Detonating Cord CutterDET-0000-053 Booster CrimpersDET-0010-006 Rubber GrommetDET-0100-018 Detcord Sizing Adapter DET-0100-053 Super Crimper AssemblyDET-14882BTS Dual Cap CrimperDET-2000-000 Detonator Safety Shield
DET-80592 Crimper/Cutter Tool KitDET-A161-ADAPTER Cord Adapter for A161 (40/60gr round to 80gr round)
DET-PE-4070 Crimp Sleeve for A140S DetonatorDT-0875-242 End Seal for 80 Grain Detonating Cord, 0.24” x 0.88”GN-000-0018 Teflon GrommetMS-1000-004 Detonating Cord Charge ClipMS-1000-115 Low Profile Charge ClipMS-1000-120 Super Big Hole Charge Clip
ACCESSORIES
Part Number DescriptionDET-0412-006A Detonating Cord, 40 gr HMX Ribbon, Air Packed
DET-100000-363A Detonating Cord, 40g HMX LS Ribbon, AirpackDET-A544015 Detonating Cord, Airpacked, 40 grain HMX RoundDET-A545015 Detonating Cord, FireLine 40 gr HMX LS Ribbon, Air Packed, 36 lbs/boxDET-80R111A Detonating Cord, 80 grain RDX Nylon Airpack (Detotec)DET-80R211A Detonating Cord, 80 grain RDX LS Airpack (Detotec)DET-80H212A Detonating Cord, 80 grain HMX LS Zytel Airpack (Detotec)DET-80R311A Detonating Cord, 80 grain RDX LS XHV Airpack (Detotec)DET-80R312A Detonating Cord, 80 grain HMX LS XHV Airpack (Detotec)DET-80H312A Detonating Cord, 80 grain HMX XHV Airpack (Detotec)DET-A538017 Detonating Cord, Fireline 8/40 RDX LS Ribbon 1.4S AirpackDET-A585015 Detonating Cord, Airpacked, 80 grain HNS LSDET-A585017 Detonating Cord, Airpacked, 80 grain HNS LSDET-PT250-A Detonating Cord, 80 gr HNS FEP Jacket, (DE P/N 2315353), Air Packed
DETONATING CORDS, INTERNATIONAL AIRPACK
Part Number DescriptionDET-80H312 Detonating Cord, 80 grain HMX XHV (Detotec)DET-80I111 Detonating Cord, 80 grain Inert DET-80P113 Detonating Cord, 80 grain PETN WP (Detotec)DET-80R111 Detonating Cord, 80 grain RDX Nylon (Detotec)DET-80R211 Detonating Cord, 80 grain RDX LS (Detotec)DET-80R311 Detonating Cord, 80 grain RDX LS XHV (Detotec)
DET-A370010 Detonating Cord, Fireline 17/80 PETN PlasticDET-A571010 Detonating Cord, 80 Gr HMX LS FireLineDET-A572010 Detonating Cord, 80 Gr HMX LS XHV FireLine DET-A572017 Detonating Cord, 80 Gr HMX LS XHV (DNX)DET-A580010 Detonating Cord, Fireline 17/80 RDX Nylon
DET-PT250 Detonating Cord, 80 gr HNS FEP Jacket, (DE P/N 2315353)
DETONATING CORDS, DOMESTIC USE (cont.)
40/60gr rounD to 80gr rounD corD
DET-A161-ADApTEr
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 29 Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to 10 shots per carrierInitiation Point Top-fired, wirelineMode of Fire Select fire, addressableDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges FracIQ®, Basix™, Basix Frac, Connex®, Razor® and Refrax™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 22.7g In Fluid; 3.60 [91.44] @ 19.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [137.90]Maximum Tensile* (lbf)[kN] 140,000 [622.75] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONSCarrier Assembly
Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotGross Weights (Fully Loaded)
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GIC31-O01 1 Shot 0° 9.5 24.13
4.25 107.95 2.0 50.80
12.1 5.5GIC31-O02 2 Shot 0° 11.5 29.21 14.2 6.4GIC31-J02 180°GIC31-G03 3 Shot 120° 13.5 34.29 16.2 7.4GIC31-B04 4 Shot 90° 15.5 39.37 18.3 8.3GIC31-P05 5 Shot 72° 17.5 44.45 20.4 9.3GIC31-A06 6 Shot 60° 19.5 49.53 22.5 10.2GIC31-A07 7 Shot 60° 21.5 54.61 24.6 11.1GIC31-P07 72°GIC31-A08 8 Shot 60° 23.5 59.69 26.7 12.1GIC31-R08 90° + 45°GIC31-A10 10 Shot 60° 27.5 69.85 30.9 14.0GIC31-R10 72° + 36° 0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern for 7 Shot 60°Refer to Components and Accessories for ancillary equipment.
GEODynamics STRATX™ offers a factory-loaded, plug-and-play, limited entry perforating system for unconventional reservoirs. STRATX integrates EPIC™ Switch addressable technology with industry-standard detonator options into a programmable initiation control (PIC) module, delivering an intrinsically-safe, deployment-ready design. Quick and simple gun-string assembly saves time and increases efficiencies at the wellsite. GEODynamics delivers STRATX carriers fully loaded to match customer specifications and preferences.
Page 30 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
FracIQ®
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
Basix™ GOOD HOLE, BIG HOLE, DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941 ‡ Fluid or Dry 19.0g, RDXEC2-33A2341 Fluid 22.7g, RDX
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDXEC2-33A2332 22.7g, HMX
3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 ‡ Fluid or Dry 19.0g, RDX
3323 Basix XDP EC2-33A2321 Fluid 22.7g, RDXEC2-33A2321-E 22.7g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]
0.60 [1.52] 28.55 [72.52] API RP 43* * ** * ** * *
0.43 [1.09] 35.80 [90.93] API RP430.51 [1.30] 42.07 [106.86] API RP 43
* 29.20 [74.17] QC0.54 [1.37] * *0.42 [1.07] 46.01 [116.87] API RP 43
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDXFracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°
4.5-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1%0.32 [0.81] 4.6 %0.34 [0.86] 3.8 %0.37 [0.94] 3.4 %0.37 [0.94] 3.0 %0.42 [1.07] 3.5 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5-5.5” OD 0.50 [1.27] 1.5%
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8%
6 spf / 60° 4.5-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91 ] 2.5 %0.40 [1.02] 3.3 %
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 31 Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex XEHEC2-33A1941-RC
‡ Fluid or Dry19.0g, RDX
EC2-33A1942-RC 19.0g, HMX
3319 Connex RXEC2-33A1991-RX
‡ Fluid or Dry19.0g, RDX
EC2-33A1992-RX 19.0g, HMX
3323 ConnexEC2-33A2321-RC
Fluid22.7g, RDX
EC2-33A2322-RC 22.7g, HMX
3323 Connex XEHEC2-33A2341-RC
Fluid22.7g, RDX
EC2-33A2342-RC 22.7g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 4.5 [11.43]
* * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
* * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]0.40 [1.02] * 15.60 [39.62]0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
* * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Test results pending.
Product Name Part Number Perforating Condition Explosive
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9%0.50 [1.27] 4.8 %
Basix™ Frac CONSTANT ENTRY HOLE AND PENETRATION
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 32 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMXEC2-33A2322-E
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 43
0.42 [1.07] 39.02 [99.11] API RP 43
Refrax™Product Name Part Number Perforating
Condition Explosive
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3320 Refrax EC2-33A2071-D 20.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° Expanded 4.0” P110
0.33-0.33 [0.84-0.84]5.5” P110
0.30-0.30 [0.76-0.76]0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
6 spf / 60° 4.5” P110 0.30-0.32 [0.76-0.81] 7.0” P110 0.39-0.41 [0.99-1.04]0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 33 Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
Standard QC to GO-Style Se�ng Tool Direct Connect Crossovers to Se�ng ToolsCrossover to GO-Style Se�ng Tool FH
3.13" Crossover Assy, GI Box x 3.38" GO Firing Head Box
GN-RX31-GO33-A
(rebuild kits: RKI-GN-RX31-GO33 (intermediate)and RKC-GN-RX31-GO33 (complete))
VaporGun™ Disposable Portless Tandem Assy
GN-R31-T078-A
3.13" Crossover, GI Box x Size 20 Se�ng ToolGN-RX31-BK20-GIC (shown)
Addi�onal crossovers available:GN-RX31-BK10-GIC (size 10)
GN-RX31-3500-GIC (3.5” Shorty)GN-RX31-3625-GIC (3.63” Compact)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
EPIC™ Module Ignitor, DT-0425-106
Direct Connect Quick Change, GN-QC31-GIC31Industry-standard connec�on to CCL or GEODynamics Release™
(rebuild kits: RKI-GN-QC31-0001 (intermediate)and RKC-GN-QC31-0001 (complete))
STRATX™ PIC Module with Detonator DT-EPIC-A140S
STRATX™ PIC Module with Detonator DT-EPIC-A140S
STRATX™ HELLFire® Carrier AssemblyGIC31-HF06 (planar shown)
STRATX™ HELLFire® Carrier AssemblyGIC31-HF06 (planar shown)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
STRATX™ Carrier Assembly, GIC31-G03 (spiral shown)(Mul�ple shot and phasing op�ons available)
STRATX™ Carrier Assembly, GIC31-G03 (spiral shown)(Mul�ple shot and phasing op�ons available)
STRATX™ Disposable Portless Tandem Assy, GN-R31-T076-A
3.13" Disposable Crossover, GI Pin x 1.63" ACME Box
GN-R31-T172-A(disposable bo�om sub)
3.13" GO Style Quick Change AssyEM-QC-QC312-00GO
Page 34 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC Spiral
Components and Accessories Part Number(s)3.13” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-GIC31RKI-GN-QC31-0001RKC-GN-QC31-0001
3.13” Disposable Portless Tandem Sub Assy GN-R31-T076-AO-Ring Materials and Size, Viton 95D (standard) OR-V95G-230STRATX™ PIC Module with Detonator
DET-E-A140S, Austin A140sDET-E-A140, Austin A140DET-E-A140F, Austin A140FDET-E-A140S-DM, Austin A140S-DM
DT-EPIC-A140SDT-EPIC-A140
DT-EPIC-A140FDT-EPIC-A140S-DM
Factory-Loaded Detonating CordDET-A580010, Fireline, 17/80 RDX Nylon DET-80R111, Detotec, 80 grain RDX NylonDET-80R211, Detotec, 80 grain, RDX LSDET-80H212, 80g HMX LS Zytec
Part Number DesignatorYIJF
3.13” Crossover Assy, GI Box x 3.38” GO Firing Head BoxIntermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX31-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.13” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX31-BK10-GICGN-RX31-BK20-GICGN-RX31-3625-GICGN-RX31-3500-GIC
3.13” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem and Top Sub Protector
GN-THD-31HF-100-AGN-THD-31HF-067
3.13” Disposable Portless Top Sub Assy, 2.75” ACME Pin x GI PinFor existing industry standard quick change connections GN-R31-T173-A
3.13” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R31-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.13” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R31HF-0022
DiSPoSable PortleSS tanDem Sub aSSembly
GN-r31-T076-A
Direct connect Quick change aSSy
GN-QC31-GIC31
StratX™ Pic moDule w/Detonator
DT-EpIC-A140 SErIES
3.13” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX31-3625-GIC
3.13” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX31-GO33-A
ePic™ moDule ignitor
DT-0425-106
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 35 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
STRATX™ Perforating System3-1/8 in (79 mm), GIC-HF Planar
GEODynamics STRATX™ offers a factory-loaded, plug-and-play, limited entry perforating system for unconventional reservoirs. STRATX integrates EPIC™ Switch addressable technology with industry-standard detonator options into a programmable initiation control (PIC) module, delivering an intrinsically-safe, deployment-ready design. Quick and simple gun-string assembly saves time and increases efficiencies at the wellsite. GEODynamics delivers STRATX carriers fully loaded to match customer specifications and preferences.
Shot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing (shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)
Initiation Point Top-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 16,000 [110.32]Maximum Tensile* (lbf)[kN] 140,000 [622.75] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
Refer to Components and Accessories for ancillary equipment.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIC31-HF03 1-3 120° 8.00 20.323.87 98.30
N/AGIC31-HF06 4-6 60° 9.50 24.13 1.42 36.07 7.90 3.58
Fully Loaded 6-Shot Carrier with attached Tandem Sub 11.55 5.24
Page 36 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC-HF Planar
HARDWARE SPECIFICATIONSGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
HELLFire®
Product Name Part Number Perforating Condition Explosive
HELLFire 26 EC2-31K0671-26
Fluid
6g, RDXHELLFire 28 EC2-31K0671-28 6g, RDXHELLFire 33 EC2-31K0771-33 7g, RDXHELLFire 36 EC2-31K0771-36 7g, RDXHELLFire 42 EC2-31K0771-42 7g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shotsper cluster 4.5” OD, P110
0.26 [0.66] 7.4 %
3.2 [8.13]0.28 [0.71] 5.5 %0.33 [0.84] 2.9 %0.36 [0.91] 1.6 %0.42 [1.07] 3.8 %
IMPORTANT: HELLFire 31K charges are NOT interchangeable with 33K charges. EC2-33K series are for 3-3/8” HELLFire only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 37 Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC-HF Planar
Standard QC to GO-Style Se�ng Tool Direct Connect Crossovers to Se�ng ToolsCrossover to GO-Style Se�ng Tool FH
3.13" Crossover Assy, GI Box x 3.38" GO Firing Head Box
GN-RX31-GO33-A
(rebuild kits: RKI-GN-RX31-GO33 (intermediate)and RKC-GN-RX31-GO33 (complete))
VaporGun™ Disposable Portless Tandem Assy
GN-R31-T078-A
3.13" Crossover, GI Box x Size 20 Se�ng ToolGN-RX31-BK20-GIC (shown)
Addi�onal crossovers available:GN-RX31-BK10-GIC (size 10)
GN-RX31-3500-GIC (3.5” Shorty)GN-RX31-3625-GIC (3.63” Compact)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
EPIC™ Module Ignitor, DT-0425-106
Direct Connect Quick Change, GN-QC31-GIC31Industry-standard connec�on to CCL or GEODynamics Release™
(rebuild kits: RKI-GN-QC31-0001 (intermediate)and RKC-GN-QC31-0001 (complete))
STRATX™ PIC Module with Detonator DT-EPIC-A140S
STRATX™ PIC Module with Detonator DT-EPIC-A140S
STRATX™ HELLFire® Carrier AssemblyGIC31-HF06 (planar shown)
STRATX™ HELLFire® Carrier AssemblyGIC31-HF06 (planar shown)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
STRATX™ Carrier Assembly, GIC31-G03 (spiral shown)(Mul�ple shot and phasing op�ons available)
STRATX™ Carrier Assembly, GIC31-G03 (spiral shown)(Mul�ple shot and phasing op�ons available)
STRATX™ Disposable Portless Tandem Assy, GN-R31-T076-A
3.13" Disposable Crossover, GI Pin x 1.63" ACME Box
GN-R31-T172-A(disposable bo�om sub)
3.13" GO Style Quick Change AssyEM-QC-QC312-00GO
Page 38 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-1/8 in (79 mm), GIC-HF Planar
Components and Accessories Part Number(s)3.13” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-GIC31RKI-GN-QC31-0001RKC-GN-QC31-0001
3.13” Disposable Portless Tandem Sub Assy GN-R31-T076-AO-Ring Materials and Size, Viton 95D (standard) OR-V95G-230STRATX™ PIC Module with Detonator
DET-E-A140S, Austin A140sDET-E-A140, Austin A140DET-E-A140F, Austin A140FDET-E-A140S-DM, Austin A140S-DM
DT-EPIC-A140SDT-EPIC-A140
DT-EPIC-A140FDT-EPIC-A140S-DM
Factory-Loaded Detonating CordDET-A580010, Fireline, 17/80 RDX Nylon DET-80R111, Detotec, 80 grain RDX NylonDET-80R211, Detotec, 80 grain, RDX LSDET-80H212, 80g HMX LS Zytec
Part Number DesignatorYIJF
3.13” Crossover Assy, GI Box x 3.38” GO Firing Head BoxIntermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX31-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.13” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX31-BK10-GICGN-RX31-BK20-GICGN-RX31-3625-GICGN-RX31-3500-GIC
3.13” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem and Top Sub Protector
GN-THD-31HF-100-AGN-THD-31HF-067
3.13” Disposable Portless Top Sub Assy, 2.75” ACME Pin x GI PinFor existing industry standard quick change connections GN-R31-T173-A
3.13” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R31-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.13” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R31HF-0022
DiSPoSable PortleSS tanDem Sub aSSembly
GN-r31-T076-A
Direct connect Quick change aSSy
GN-QC31-GIC31
StratX™ Pic moDule w/Detonator
DT-EpIC-A140 SErIES
3.13” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX31-3625-GIC
3.13” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX31-GO33-A
ePic™ moDule ignitor
DT-0425-106
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 39 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
STRATX™ Perforating System3-3/8 in (86 mm), GIC-HF Planar
Shot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing (shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)
Initiation Point Top-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] Ø3.48” [88.39] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 15,000 [103.42]Maximum Tensile* (lbf)[kN] 175,000 [778] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
Refer to Components and Accessories for ancillary equipment.
GEODynamics STRATX™ offers a factory-loaded, plug-and-play, limited entry perforating system for unconventional reservoirs. STRATX integrates EPIC™ Switch addressable technology with industry-standard detonator options into a programmable initiation control (PIC) module, delivering an intrinsically-safe, deployment-ready design. Quick and simple gun-string assembly saves time and increases efficiencies at the wellsite. GEODynamics delivers STRATX carriers fully loaded to match customer specifications and preferences.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIC33-HF061-3 120°
9.50 24.13 3.87 98.30 1.42 36.07 9.93 4.504-6 60°
Fully Loaded 6-Shot Carrier with attached Tandem Sub 13.79 6.26
Page 40 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-3/8 in (86 mm), GIC-HF Planar
HARDWARE SPECIFICATIONSGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable switch tandem subNominal OD / Wall Thickness (in)[mm] 3.375” [86] / 0.375” [9.53]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
HELLFire® EXTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 25 EC2-33K0671-25 Fluid 6.0g, RDXHELLFire 30 EC2-33K0771-30 Fluid 7.0g, RDXHELLFire 33 EC2-33K0771-33 Fluid 7.0g, RDXHELLFire 34 EC2-33K0771-34 Fluid 7.0g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shots per cluster 5.5” OD, P-110
0.25 [0.64] 3.90%
3.5 [8.89]0.30 [0.76] 5.50%0.33 [0.84] 3.60%0.34 [0.86] 5.80%
IMPORTANT: HELLFire 33K charges are NOT interchangeable with 31K charges. EC2-31K series are for 3-1/8” HELLFire only. HMX equivalents available. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 41 Revised: July 24, 2020 1:30 PM
STRATX™ Perforating System3-3/8 in (86 mm), GIC-HF Planar
Components and Accessories Part Number(s)3.38” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC33-GIC33RKI-GN-QC31-0001RKC-GN-QC31-0001
3.38” Disposable Portless Tandem Sub Assy GN-R33-T076-AO-Ring Materials and Size, Viton 95D (standard) OR-V95G-231STRATX™ PIC Module with Detonator
DET-E-A140S, Austin A140sDET-E-A140, Austin A140DET-E-A140F, Austin A140FDET-E-A140S-DM, Austin A140S-DM
DT-EPIC-A140SDT-EPIC-A140
DT-EPIC-A140FDT-EPIC-A140S-DM
Factory-Loaded Detonating CordDET-A580010, Fireline, 17/80 RDX Nylon DET-80R111, Detotec, 80 grain RDX NylonDET-80R211, Detotec, 80 grain, RDX LSDET-80H212, 80g HMX LS Zytec
Part Number DesignatorYIJF
3.38” Crossover Assy, GI Box x 3.38” GO Firing Head BoxIntermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX33-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.38” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX33-BK10-GICGN-RX33-BK20-GICGN-RX33-3625-GICGN-RX33-3500-GIC
3.38” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem and Top Sub Protector
GN-THD-33HF-100-AGN-THD-33HF-067
3.38” Disposable Portless Top Sub Assy, 2.75” ACME Pin x GI PinFor existing industry standard quick change connections GN-R33-T173-A
3.38” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R33-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.38” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R33HF-0022
Perforating String comPonentS Shown: DIrECT CONNECT QuICk ChANGE CONNECTION TO TANDEm Sub,
TwO CArrIErS, TANDEm Sub CONECTION TO SETTING TOOl ADApTEr
DiSPoSable PortleSS tanDem Sub aSSembly
GN-r33-T076-A
Direct connect Quick change aSSy
GN-QC33-GIC33
StratX™ Pic moDule w/Detonator
DT-EpIC-A140 SErIES
3.38” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX33-3625-GIC
3.38” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX33-GO33-A
ePic™ moDule ignitor
DT-0425-106
Page 42 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 43 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to 19 shots per carrierInitiation Point Bottom-fired, wirelineMode of Fire Select fire, addressableDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Basix Frac, Connex®, Razor®, and Refrax™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 22.7g In Fluid; 3.60 [91.44] @ 19.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [137.90]Maximum Tensile* (lbf)[kN] 140,000 [622.75] *Hardware Calculated Breaking Point
GEODynamics’ advanced VaporGun™ perforating system delivers a versatile, addressable switch-ready, portless, and oriented solution that provides high levels of precision and reliability. VaporGun’s open architecture design allows engineering teams to plan and complete multistage plug-and-perf operations more safely, precisely, and cost-effectively. VaporGun can accommodate a variety of market-leading shaped charge designs, including GEODynamics charges. GEODynamics can provide the perforating system fully loaded, or ready to load, and with or without an addressable switch.
CARRIER SPECIFICATIONS, 60° PHASINGCarrier Assembly
Part NumberShot & Phasing
Options Gun Lengths Gun End to Center of First Scallop @ 0°
Distance Shot to Shot
Shipping Assy Weights
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GIB31-A02 2
60°
13.5 34.29
7.0 177.80 2.0 50.80
10.1 4.6GIB31-A03 3 15.5 39.37 11.8 5.4GIB31-A04 4 17.5 44.45 13.5 6.1GIB31-A05 5 19.5 49.53 15.2 6.9GIB31-A06 6 21.5 54.61 16.9 7.7GIB31-A07 7 23.5 59.69 18.6 8.5GIB31-A08 8 25.5 64.77 20.3 9.2GIB31-A09 9 27.5 69.85 22.0 10.0GIB31-A10 10 29.5 74.93 23.7 10.8GIB31-A11 11 31.5 80.01 25.4 11.5GIB31-A12 12 33.5 85.09 27.1 12.3GIB31-A13 13 35.5 90.17 28.8 13.1GIB31-A14 14 37.5 95.25 30.5 13.9GIB31-A15 15 39.5 100.33 32.2 14.6GIB31-A16 16 41.5 105.41 33.9 15.4GIB31-A17 17 43.5 110.49 35.6 16.2GIB31-A18 18 45.5 115.57 37.3 17.0GIB31-A19 19 47.5 120.65 39.0 17.7
Page 44 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
CARRIER SPECIFICATIONS, 90° PHASING
CARRIER SPECIFICATIONS, 120° PHASING
Carrier AssemblyPart Number
Shot & Phasing Options Gun Lengths Gun End to Center
of First Scallop @ 0°Distance
Shot to ShotShipping Assy
Weights # Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB31-B02 2
90°
13.5 34.29
7.0 177.80 2.0 50.80
10.1 4.6GIB31-B03 3 15.5 39.37 11.8 5.4GIB31-B04 4 17.5 44.45 13.5 6.1GIB31-B05 5 19.5 49.53 15.2 6.9GIB31-B06 6 21.5 54.61 16.9 7.7GIB31-B07 7 23.5 59.69 18.6 8.5GIB31-B08 8 25.5 64.77 20.3 9.2GIB31-B09 9 27.5 69.85 22.0 10.0GIB31-B10 10 29.5 74.93 23.7 10.8GIB31-B11 11 31.5 80.01 25.4 11.5GIB31-B12 12 33.5 85.09 27.1 12.3GIB31-B13 13 35.5 90.17 28.8 13.1GIB31-B14 14 37.5 95.25 30.5 13.9GIB31-B15 15 39.5 100.33 32.2 14.6GIB31-B16 16 41.5 105.41 33.9 15.4GIB31-B17 17 43.5 110.49 35.6 16.2GIB31-B18 18 45.5 115.57 37.3 17.0GIB31-B19 19 47.5 120.65 39.0 17.7
GIB31-G02 2
120°
13.5 34.29
7.0 177.80 2.0 50.80
10.1 4.6GIB31-G03 3 15.5 39.37 11.8 5.4GIB31-G04 4 17.5 44.45 13.5 6.1GIB31-G05 5 19.5 49.53 15.2 6.9GIB31-G06 6 21.5 54.61 16.9 7.7GIB31-G07 7 23.5 59.69 18.6 8.5GIB31-G08 8 25.5 64.77 20.3 9.2GIB31-G09 9 27.5 69.85 22.0 10.0GIB31-G10 10 29.5 74.93 23.7 10.8GIB31-G11 11 31.5 80.01 25.4 11.5GIB31-G12 12 33.5 85.09 27.1 12.3GIB31-G13 13 35.5 90.17 28.8 13.1GIB31-G14 14 37.5 95.25 30.5 13.9GIB31-G15 15 39.5 100.33 32.2 14.6GIB31-G16 16 41.5 105.41 33.9 15.4GIB31-G17 17 43.5 110.49 35.6 16.2GIB31-G18 18 45.5 115.57 37.3 17.0GIB31-G19 19 47.5 120.65 39.0 17.7
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 45 Revised: July 24, 2020 1:30 PM
CARRIER SPECIFICATIONS, 0° PHASING
CARRIER SPECIFICATIONS, 180° PHASING
GIB31-O01 1
0°
11.5 29.21 7.0 177.80 N/A N/A 8.4 3.8GIB31-O02 2 13.5 34.29
7.0 177.80 2.0 50.80
10.1 4.6GIB31-O03 3 15.5 39.37 11.8 5.4GIB31-O04 4 17.5 44.45 13.5 6.1GIB31-O05 5 19.5 49.53 15.2 6.9GIB31-O06 6 21.5 54.61 16.9 7.7GIB31-O07 7 23.5 59.69 18.6 8.5GIB31-O08 8 25.5 64.77 20.3 9.2GIB31-O09 9 27.5 69.85 22.0 10.0GIB31-O10 10 29.5 74.93 23.7 10.8GIB31-O11 11 31.5 80.01 25.4 11.5GIB31-O12 12 33.5 85.09 27.1 12.3GIB31-O13 13 35.5 90.17 28.8 13.1GIB31-O14 14 37.5 95.25 30.5 13.9GIB31-O15 15 39.5 100.33 32.2 14.6GIB31-O16 16 41.5 105.41 33.9 15.4GIB31-O17 17 43.5 110.49 35.6 16.2GIB31-O18 18 45.5 115.57 37.3 17.0GIB31-O19 19 47.5 120.65 39.0 17.7
Carrier AssemblyPart Number
Shot & Phasing Options Gun Lengths Gun End to Center
of First Scallop @ 0°Distance
Shot to ShotShipping Assy
Weights # Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB31-J02 2
180°
13.5 34.29
7.0 177.80 2.40 60.96
10.5 4.8GIB31-J03 3 16.5 41.91 12.6 5.7GIB31-J04 4 19.0 48.26 14.7 6.7GIB31-J05 5 21.5 54.61 16.8 7.6GIB31-J06 6 23.5 59.69 18.5 8.4GIB31-J07 7 26.0 66.04 20.6 9.4GIB31-J08 8 28.5 72.39 22.7 10.3GIB31-J09 9 31.0 78.74 24.8 11.3GIB31-J10 10 33.5 85.09 26.9 12.2GIB31-J11 11 35.5 90.17 28.6 13.0GIB31-J12 12 38.0 96.52 30.7 14.0GIB31-J13 13 40.5 102.87 32.9 14.9GIB31-J14 14 43.0 109.22 35.0 15.9GIB31-J15 15 45.5 115.57 37.1 16.9GIB31-J16 16 47.5 120.65 38.8 17.6
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
Page 46 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
FracIQ®
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDXFracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°
4.5-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1%0.32 [0.81] 4.6 %0.34 [0.86] 3.8 %0.37 [0.94] 3.4 %0.37 [0.94] 3.0 %0.42 [1.07] 3.5 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5”-5.5” OD 0.50 [1.27] 1.5 %
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8 %
6 spf / 60° 4.5-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91 ] 2.5 %0.40 [1.02] 3.3 %
Carrier AssemblyPart Number
Shot & Phasing Options Gun Lengths Gun End to Center
of First Scallop @ 0°Distance
Shot to ShotShipping Assy
Weights # Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB31-P02 2
72°
13.5 34.29
7.0 177.80 2.0 50.80
10.1 4.6GIB31-P03 3 15.5 39.37 11.8 5.4GIB31-P04 4 17.5 44.45 13.5 6.1GIB31-P05 5 19.5 49.53 15.2 6.9GIB31-P06 6 21.5 54.61 16.9 7.7GIB31-P07 7 23.5 59.69 18.6 8.5GIB31-P08 8 25.5 64.77 20.3 9.2GIB31-P09 9 27.5 69.85 22.0 10.0GIB31-P10 10 29.5 74.93 23.7 10.8GIB31-P11 11 31.5 80.01 25.4 11.5GIB31-P12 12 33.5 85.09 27.1 12.3GIB31-P13 13 35.5 90.17 28.8 13.1GIB31-P14 14 37.5 95.25 30.5 13.9GIB31-P15 15 39.5 100.33 32.2 14.6GIB31-P16 16 41.5 105.41 33.9 15.4GIB31-P17 17 43.5 110.49 35.6 16.2GIB31-P18 18 45.5 115.57 37.3 17.0GIB31-P19 19 47.5 120.65 39.0 17.7
CARRIER SPECIFICATIONS, 72° PHASING
72°
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 47 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
Basix™ GOOD HOLE, BIG HOLE, DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3319 Basix GHEC2-33A1941 ‡ Fluid or Dry 19.0g, RDXEC2-33A2341 Fluid 22.7g, RDX
3323 Basix BHEC2-33A2331
Fluid22.7g, RDX
EC2-33A2332 22.7g, HMX3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 ‡ Fluid or Dry 19.0g, RDX
3323 Basix XDPEC2-33A2321
Fluid22.7g, RDX
EC2-33A2321-E 22.7g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]
0.60 [1.52] 28.55 [72.52] API RP 43* * ** * ** * *
0.43 [1.09] 35.80 [90.93] API RP430.51 [1.30] 42.07 [106.86] API RP 43
* 29.20 [74.17] QC0.54 [1.37] * *0.42 [1.07] 46.01 [116.87] API RP 43
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. * Test results pending.
Product Name Part Number Perforating Condition Explosive
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9%0.50 [1.27] 4.8 %
Basix™ Frac CONSTANT ENTRY HOLE AND PENETRATION
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 48 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
Razor® EXTREME DEEP PENETRATINGShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 43
0.42 [1.07] 39.02 [99.11] API RP 43
Product Name Part Number Perforating Condition Explosive
3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDPEC2-33A2322
Fluid 22.7g, HMXEC2-33A2322-E
Refrax™Product Name Part Number Perforating
Condition Explosive
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3320 Refrax EC2-33A2071-D 20.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° Expanded 4.0” P110
0.33-0.33 [0.84-0.84]5.5” P110
0.30-0.30 [0.76-0.76]0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
6 spf / 60° 4.5” P1100.30-0.32 [0.76-0.81]
7.0” P1100.39-0.41 [0.99-1.04]
0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only.
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex XEH EC2-33A1941-RC ‡ Fluid or Dry 19.0g, RDXEC2-33A1942-RC 19.0g, HMX
3319 Connex RX EC2-33A1991-RX ‡ Fluid or Dry 19.0g, RDXEC2-33A1992-RX 19.0g, HMX
3323 Connex EC2-33A2321-RC Fluid 22.7g, RDXEC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2341-RC Fluid 22.7g, RDXEC2-33A2342-RC 22.7g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 4.5 [11.43] * * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
6 spf / 60° 4.5 [11.43] * * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]
6 spf / 60° 4.5 [11.43] 0.40 [1.02] * 15.60 [39.62]0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
6 spf / 60° 4.5 [11.43] * * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. *Test results pending.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 49 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
WIRING CONNECTIONS
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable or reusable tandem subsNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94] Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Page 50 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
Standard QC to GO-Style Se�ng Tool Direct Connect Crossovers to Se�ng ToolsCrossover to GO-Style Se�ng Tool FH
3.13" Crossover Assy, GI Box x 3.38" GO Firing Head Box
GN-RX31-GO33-A
(rebuild kits: RKI-GN-RX31-GO33 (intermediate)and RKC-GN-RX31-GO33 (complete))
VaporGun™ Disposable Portless Tandem Assy
GN-R31-T078-A
3.13" Crossover, GI Box x Size 20 Se�ng ToolGN-RX31-BK20-GIC (shown)
Addi�onal crossovers available:GN-RX31-BK10-GIC (size 10)
GN-RX31-3500-GIC (3.5” Shorty)GN-RX31-3625-GIC (3.63” Compact)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
EPIC™ Module Ignitor DT-0425-106
Direct Connect Quick ChangeGN-QC31-GIC31
Industry-standard connec�on to CCL or GEODynamics Release™ (rebuild kits: RKI-GN-QC31-0001 (intermediate)
and RKC-GN-QC31-0001 (complete))
VaporGun™ Disposable Portless Tandem Assy GN-R31-T078-A
VaporGun™ Carrier AssemblyGIB31-J02 (spiral shown)
HELLFire™ phasing available (GIB31-HF series)
VaporGun™ Disposable Portless Tandem Assy GN-R31-T078-A
VaporGun™ Carrier AssemblyGIB31-J02 (spiral shown)
HELLFire™ phasing available (GIB31-HF series)
3.13" Disposable Crossover, GI Pin x 1.63" ACME Box
GN-R31-T172-A(disposable bo�om sub)
3.13" GO Style Quick Change AssyEM-QC-QC312-00GO
Tandem rebuild kits: RKC-R31-T095-A (complete, no lock ring)RKC-R31-T081-A (complete rebuild with lock ring)
(all tandems are solid feed-through pin connec�ons)
Reusable Tandem, GN-R31-T095-A
Orien�ng Tandem, GN-R31-T081-A
Reusable Portless Tandem Sub Op�ons
Lock Ring for Orien�ng Tandem, GN-R31-L001-320
Centralizer Ring for Orien�ng Tandem, 4.35” ODGN-R31-L435
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 51 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB Spiral
Components and Accessories Part Number(s)3.13” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-GIC31RKI-GN-QC31-0001RKC-GN-QC31-0001
3.13” Portless Tandem Sub Assemblies, Rebuilt Kits, Centralizer, Lock RingDisposable Tandem Contact Sub Assembly (solid feedthrough)Tandem Contact Sub Assembly (solid feedthrough)Orienting Tandem Contact Sub Assembly (lock ring and solid feedthrough)Tandem Rebuild Kit (complete, no lock ring, for T081-A and T095-A subs)Tandem Rebuild Kit (complete, with lock ring, for T081-A subs)Centralizer Ring for Orienting Tandem, 4.35” ODLock Ring for Orienting Tandem (left hand threads)
GN-R31-T078-AGN-R31-T095-AGN-R31-T081-ARKC-R31-T095-ARKC-R31-T081-A
GN-R31-L435GN-R31-L001-320
Disposable T076 Tandem w/Conversion Insert (replaces GN-R31-T084-A)Disposable T074 Tandem w/Conversion Insert (existing stock only)Conversion Insert (listed for reference only; included in T086-A and T084-A)
GN-R31-T086-AGN-R31-T084-A
GN-IGS-080O-Ring Materials and Size, Viton 95D (standard) OR-V95G-2303.13” Crossover Assy, GI Box x 3.38” GO Firing Head Box
Intermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX31-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.13” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX31-BK10-GICGN-RX31-BK20-GICGN-RX31-3625-GICGN-RX31-3500-GIC
3.13” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem Sub Protector
GN-THD-31GI-105-AGN-THD-31HF-067
3.13” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R31-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.13” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R31HF-0022
DiSPoSable PortleSS tanDem contact Sub aSSembly
GN-r31-T078-A
Direct connect Quick change aSSy
GN-QC31-GIC31
3.13” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX31-3625-GIC
3.13” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX31-GO33-A
orienting PortleSS tanDem contact Sub aSSembly
GN-r31-T081-A
for gib SerieS only
reuSable PortleSS tanDem contact Sub aSSembly
GN-r31-T095-A
for gib SerieS only
ePic™ moDule ignitor
DT-0425-106
Page 52 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 53 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB-HF Planar
APPLICATION SPECIFICATIONSShot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain roundCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 16,000 [110.32]Maximum Tensile* (lbf)[kN] 140,000 [622.75] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
GEODynamics’ advanced VaporGun™ perforating system delivers a versatile, addressable switch-ready, portless, and oriented solution that provides high levels of precision and reliability. VaporGun’s open architecture design allows engineering teams to plan and complete multistage plug-and-perf operations more safely, precisely, and cost-effectively. The VaporGun HF system accommodates HELLFire® charge technology. GEODynamics can provide the perforating system fully loaded, or ready to load, and with or without an addressable switch.
Refer to Components and Accessories for ancillary equipment.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB31-HF03 1-3 120° 10.00 25.405.94 150.88
N/AGIB31-HF06 4-6 60° 11.50 29.21 1.38 35.05 12.1 5.5
Fully Loaded 6-Shot Carrier with attached Tandem Sub 15.7 7.1
Page 54 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
HARDWARE SPECIFICATIONSGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable or reusable tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
VaporGun™ Perforating System3-1/8 in (79 mm), GIB-HF Planar
WIRING CONNECTIONS
HELLFire®
Product Name Part Number Perforating Condition Explosive
HELLFire 26 EC2-31K0671-26
Fluid
6g, RDXHELLFire 28 EC2-31K0671-28 6g, RDXHELLFire 33 EC2-31K0771-33 7g, RDXHELLFire 36 EC2-31K0771-36 7g, RDXHELLFire 42 EC2-31K0771-42 7g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shotsper cluster 4.5” OD, P110
0.26 [0.66] 7.4 % 3.2 [8.13]0.28 [0.71] 5.5 % 3.2 [8.13]0.33 [0.84] 2.9 % 3.2 [8.13]0.36 [0.91] 1.6 % 3.2 [8.13]0.42 [1.07 ] 3.8 % 3.2 [8.13]
IMPORTANT: HELLFire 31K charges are NOT interchangeable with 33K charges. EC2-33K series are for 3-3/8” HELLFire only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 55 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB-HF Planar
Standard QC to GO-Style Se�ng Tool Direct Connect Crossovers to Se�ng ToolsCrossover to GO-Style Se�ng Tool FH
3.13" Crossover Assy, GI Box x 3.38" GO Firing Head Box
GN-RX31-GO33-A
(rebuild kits: RKI-GN-RX31-GO33 (intermediate)and RKC-GN-RX31-GO33 (complete))
VaporGun™ Disposable Portless Tandem Assy
GN-R31-T078-A
3.13" Crossover, GI Box x Size 20 Se�ng ToolGN-RX31-BK20-GIC (shown)
Addi�onal crossovers available:GN-RX31-BK10-GIC (size 10)
GN-RX31-3500-GIC (3.5” Shorty)GN-RX31-3625-GIC (3.63” Compact)
STRATX™ Disposable Portless Tandem Assy GN-R31-T076-A
EPIC™ Module Ignitor DT-0425-106
Direct Connect Quick ChangeGN-QC31-GIC31
Industry-standard connec�on to CCL or GEODynamics Release™ (rebuild kits: RKI-GN-QC31-0001 (intermediate)
and RKC-GN-QC31-0001 (complete))
VaporGun™ Disposable Portless Tandem Assy GN-R31-T078-A
VaporGun™ Carrier AssemblyGIB31-J02 (spiral shown)
HELLFire™ phasing available (GIB31-HF series)
VaporGun™ Disposable Portless Tandem Assy GN-R31-T078-A
VaporGun™ Carrier AssemblyGIB31-J02 (spiral shown)
HELLFire™ phasing available (GIB31-HF series)
3.13" Disposable Crossover, GI Pin x 1.63" ACME Box
GN-R31-T172-A(disposable bo�om sub)
3.13" GO Style Quick Change AssyEM-QC-QC312-00GO
Tandem rebuild kits: RKC-R31-T095-A (complete, no lock ring)RKC-R31-T081-A (complete rebuild with lock ring)
(all tandems are solid feed-through pin connec�ons)
Reusable Tandem, GN-R31-T095-A
Orien�ng Tandem, GN-R31-T081-A
Reusable Portless Tandem Sub Op�ons
Lock Ring for Orien�ng Tandem, GN-R31-L001-320
Centralizer Ring for Orien�ng Tandem, 4.35” ODGN-R31-L435
Page 56 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-1/8 in (79 mm), GIB-HF Planar
Components and Accessories Part Number(s)3.13” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-GIC31RKI-GN-QC31-0001RKC-GN-QC31-0001
3.13” Portless Tandem Sub Assemblies, Rebuilt Kits, Centralizer, Lock RingDisposable Tandem Contact Sub Assembly (solid feedthrough)Tandem Contact Sub Assembly (solid feedthrough)Orienting Tandem Contact Sub Assembly (lock ring and solid feedthrough)Tandem Rebuild Kit (complete, no lock ring, for T081-A and T095-A subs)Tandem Rebuild Kit (complete, with lock ring, for T081-A subs)Centralizer Ring for Orienting Tandem, 4.35” ODLock Ring for Orienting Tandem (left hand threads)
GN-R31-T078-AGN-R31-T095-AGN-R31-T081-ARKC-R31-T095-ARKC-R31-T081-A
GN-R31-L435GN-R31-L001-320
Disposable T076 Tandem w/Conversion Insert (replaces GN-R31-T084-A)Disposable T074 Tandem w/Conversion Insert (existing stock only)Conversion Insert (listed for reference only; included in T086-A and T084-A)
GN-R31-T086-AGN-R31-T084-A
GN-IGS-080O-Ring Materials and Size, Viton 95D (standard) OR-V95G-2303.13” Crossover Assy, GI Box x 3.38” GO Firing Head Box
Intermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX31-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.13” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX31-BK10-GICGN-RX31-BK20-GICGN-RX31-3625-GICGN-RX31-3500-GIC
3.13” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem Sub Protector
GN-THD-31GI-105-AGN-THD-31HF-067
3.13” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R31-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.13” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R31HF-0022
DiSPoSable PortleSS tanDem contact Sub aSSembly
GN-r31-T078-A
Direct connect Quick change aSSy
GN-QC31-GIC31
3.13” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX31-3625-GIC
3.13” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX31-GO33-A
orienting PortleSS tanDem contact Sub aSSembly
GN-r31-T081-A
for gib SerieS only
reuSable PortleSS tanDem contact Sub aSSembly
GN-r31-T095-A
for gib SerieS only
ePic™ moDule ignitor
DT-0425-106
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 57 Revised: July 24, 2020 2:05 PM
VaporGun™ Perforating System3-3/8 in (86 mm), GIB Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to seven (7) shots per carrierInitiation Point Bottom-fired, wirelineMode of Fire Select fire, addressableDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Connex®, and Razor®
Maximum Gun Swell (in)[mm] 3.56 [90.42] @ 25.0g In Fluid; 3.63 [92.20] @ 22.7g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,700 [156.51]Maximum Tensile* (lbf)[kN] 322,000 [1432] *Hardware Calculated Breaking Point
GEODynamics’ advanced VaporGun™ perforating system delivers a versatile, addressable switch-ready, portless, and oriented solution that provides high levels of precision and reliability. VaporGun’s open architecture design allows engineering teams to plan and complete multistage plug-and-perf operations more safely, precisely, and cost-effectively. VaporGun can accommodate a variety of market-leading shaped charge designs, including GEODynamics charges. GEODynamics can provide the perforating system fully loaded, or ready to load, and with or without an addressable switch.
0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern for 7 Shot 60°
Carrier AssemblyPart Number
Shot & Phasing Options Gun Lengths Gun End to Center
of First Scallop @ 0°Distance
Shot to ShotShipping Assy
Weights # Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB33-O01 1 Shot 0° 11.5 29.21
7.0 177.80 2.0 50.80
12.9 5.9GIB33-O02
2 Shot0°
13.5 34.29 14.6 6.6GIB33-J02 180°GIB33-G03 3 Shot 120° 15.5 39.37 16.3 7.4GIB33-B04 4 Shot 90° 17.5 44.45 18.1 8.2GIB33-P05 5 Shot 72° 19.5 49.53 21.6 9.8GIB33-A06 6 Shot 60° 21.5 54.61 22.1 10.0GIB33-A07 7 Shot 60° 23.5 59.69 25.1 11.4
CARRIER SPECIFICATIONS
Page 58 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex RX EC2-33A1992-RXIn Fluid or Dry
19.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2342-RC 22.7g, HMX3325 Connex EC2-33B2522-RC
Fluid25.0g, HMX
3325 Connex XEH EC2-33B2542-RC 25.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
5-1/2 [13.97] 0.42 [1.07] 0.32 [0.81] 11.60 [29.46]
4-1/2 [11.43]0.47 [1.19] 0.46 [1.17] 15.31 [38.89]0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
4-1/2 [11.43]0.53 [1.35] 0.48 [1.22] 15.45 [39.24]0.54 [1.37] 0.40 [1.02] 14.92 [37.90]
VaporGun™ Perforating System3-3/8 in (86 mm), GIB Spiral
FracIQ®
Basix™ BIG HOLE and GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDX3323 Basix GH EC2-33A2341 In Fluid or Dry 22.7g, RDX3325 Basix GH EC2-33B2541 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 7.0 [17.78] 0.74 [1.88] 7.13 [18.11] API RP 43
6 spf / 60° 4-1/2 [11.43]0.52 [1.32] 33.58 [85.29]
API RP 430.57 [1.45] 25.91 [65.81]
Basix™ DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Basix DP EC2-33A2351 In Fluid or Dry 22.7g, RDX3323 Basix XDP EC2-33A2321-E In Fluid or Dry 22.7g, RDX3325 Basix XDP EC2-33B2521-E Fluid 25.0g, RDX3325 Basix XDP EC2-33B2521 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43]
0.47 [1.19] 32.10 [81.53] QC0.45 [1.14] 46.32 [117.65] API RP 430.45 [1.14] 50.08 [127.20] API RP 430.45 [1.14] 44.58 [113.23] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°4.5”-5.5” OD 0.22 [0.56] 5.5%
5.0 [12.70]6.0” OD P110 0.26 [0.66] 2.3%
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 59 Revised: July 24, 2020 2:05 PM
VaporGun™ Perforating System3-3/8 in (86 mm), GIB Spiral
WIRING CONNECTIONS
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable or reusable tandem subsNominal OD / Wall Thickness (in)[mm] 3.375 [85.73] / 0.3775 [9.59]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Razor XDP EC2-33A2322 In Fluid or Dry 22.7g, HMX3325 Razor XDP EC2-33B2522 Fluid 25.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43] 0.45 [1.14] 46.32 [117.65] API RP 436 spf / 60° 4-1/2 [11.43] 0.53 [1.35] 47.30 [120.14] API RP 19B
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 60 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
Components and Accessories Part Number(s)3.38” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC33-GIC33RKI-GN-QC31-0001RKC-GN-QC31-0001
3.38” Portless Tandem Sub Assemblies, Rebuilt Kits, Centralizer, Lock RingDisposable Tandem Contact Sub Assembly (solid feedthrough)Tandem Contact Sub Assembly (solid feedthrough)Orienting Tandem Contact Sub Assembly (lock ring and solid feedthrough)Tandem Rebuild Kit (complete, no lock ring, for T081-A and T095-A subs)Lock Ring for Orienting Tandem (left hand threads)
GN-R33-T078-AGN-R33-T095-AGN-R33-T081-ARKC-R31-T095-A
GN-R33-L001-338O-Ring Materials and Size, Viton 95D (standard) OR-V95G-2313.38” Crossover Assy, GI Box x 3.38” GO Firing Head Box
Intermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX33-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.38” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX33-BK10-GICGN-RX33-BK20-GICGN-RX33-3625-GICGN-RX33-3500-GIC
3.38” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem and Top Sub Protector
GN-THD-33GI-105-AGN-THD-33HF-067
3.38” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R33-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.38” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R33HF-0022
VaporGun™ Perforating System3-3/8 in (86 mm), GIB Spiral
Perforating String comPonentS Shown: DIrECT CONNECT QuICk ChANGE CONNECTION TO TANDEm Sub,
TwO CArrIErS, TANDEm Sub CONNECTION TO SETTING TOOl CrOSSOvEr
DiSPoSable PortleSS tanDem contact Sub aSSembly
GN-r33-T078-A
Direct connect Quick change aSSy
GN-QC33-GIC33
3.38” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX33-3625-GIC
3.38” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX33-GO33-A
orienting PortleSS tanDem contact Sub aSSembly
GN-r33-T081-A
for gib SerieS only
reuSable PortleSS tanDem contact Sub aSSembly
GN-r33-T095-A
for gib SerieS only
ePic™ moDule ignitor
DT-0425-106
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 61 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-3/8 in (86 mm), GIB-HF Planar
APPLICATION SPECIFICATIONSShot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain roundCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] Ø3.48” [88.39] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 15,000 [103.42]Maximum Tensile* (lbf)[kN] 322,000 [1432] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
GEODynamics’ advanced VaporGun™ perforating system delivers a versatile, addressable switch-ready, portless, and oriented solution that provides high levels of precision and reliability. VaporGun’s open architecture design allows engineering teams to plan and complete multistage plug-and-perf operations more safely, precisely, and cost-effectively. The VaporGun HF system accommodates HELLFire® charge technology. GEODynamics can provide the perforating system fully loaded, or ready to load, and with or without an addressable switch.
Refer to Components and Accessories for ancillary equipment.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GIB33-HF061-3 120°
11.50 29.21 5.87 149.10 1.42 36.07 12.65 5.744-6 60°
Fully Loaded 6-Shot Carrier with attached Tandem Sub 16.55 7.51
Page 62 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
HARDWARE SPECIFICATIONSGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Disposable or reusable tandem subNominal OD / Wall Thickness (in)[mm] 3.375” [86] / 0.375” [9.53]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
VaporGun™ Perforating System3-3/8 in (86 mm), GIB-HF Planar
WIRING CONNECTIONS
HELLFire® EXTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 25 EC2-33K0671-25 Fluid 6.0g, RDXHELLFire 30 EC2-33K0771-30 Fluid 7.0g, RDXHELLFire 33 EC2-33K0771-33 Fluid 7.0g, RDXHELLFire 34 EC2-33K0771-34 Fluid 7.0g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shots per cluster 5.5” OD, P-110
0.25 [0.64] 3.90%
3.5 [8.89]0.30 [0.76] 5.50%0.33 [0.84] 3.60%0.34 [0.86] 5.80%
IMPORTANT: HELLFire 33K charges are NOT interchangeable with 31K charges. EC2-31K series are for 3-1/8” HELLFire only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 63 Revised: July 24, 2020 1:30 PM
VaporGun™ Perforating System3-3/8 in (86 mm), GIB-HF Planar
Components and Accessories Part Number(s)3.38” Direct Connect Quick Change Assy (direct connection to top gun tandem)
Intermediate Rebuild Kit (contacts, teflon tubing, screw, spring, insulating ret.)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC33-GIC33RKI-GN-QC31-0001RKC-GN-QC31-0001
3.38” Portless Tandem Sub Assemblies, Rebuilt Kits, Centralizer, Lock RingDisposable Tandem Contact Sub Assembly (solid feedthrough)Tandem Contact Sub Assembly (solid feedthrough)Orienting Tandem Contact Sub Assembly (lock ring and solid feedthrough)Tandem Rebuild Kit (complete, no lock ring, for T081-A and T095-A subs)Lock Ring for Orienting Tandem (left hand threads)
GN-R33-T078-AGN-R33-T095-AGN-R33-T081-ARKC-R31-T095-A
GN-R33-L001-338O-Ring Materials and Size, Viton 95D (standard) OR-V95G-2313.38” Crossover Assy, GI Box x 3.38” GO Firing Head Box
Intermediate Rebuild KitComplete Rebuild Kit (all required parts)
GN-RX33-GO33-ARKI-GN-RX31-GO33RKC-GN-RX31-GO33
3.38” Crossover, GI Box (Bottom Gun Tandem) to Setting ToolGI Box x Size 10 Setting ToolGI Box x Size 20 Setting ToolGI Box x 3.63” Wireline Compact Setting ToolGI Box x 3.5” Shorty Setting Tool
GN-RX33-BK10-GICGN-RX33-BK20-GICGN-RX33-3625-GICGN-RX33-3500-GIC
3.38” Plastic Thread ProtectorsCarrier (Gun) ProtectorTandem and Top Sub Protector
GN-THD-33GI-105-AGN-THD-33HF-067
3.38” Disposable Crossover, GI Pin x 1.63” ACME Box (disposable bottom sub)Thread Protector (1.63” box connection)Thread Protector o-ring
For existing industry-standard quick change connections
GN-R33-T172-AEM-EL1-THD-GOCQP
OR-N569-222
3.38” Bull Plug (bottom gun, e.g., for toe preps in vertical wells) GN-R33HF-0022
Perforating String comPonentS Shown: DIrECT CONNECT QuICk ChANGE CONNECTION TO TANDEm Sub,
TwO CArrIErS, TANDEm Sub CONECTION TO SETTING TOOl CrOSSOvEr
DiSPoSable PortleSS tanDem contact Sub aSSembly
GN-r33-T078-A
Direct connect Quick change aSSy
GN-QC33-GIC33
3.38” croSSover, gi boX X 3.63” comPact Setting tool
GN-rX33-3625-GIC
3.38” croSSover aSSy, gi boX X 3.38” go firing heaD boX
GN-rX33-GO33-A
orienting PortleSS tanDem contact Sub aSSembly
GN-r33-T081-A
for gib SerieS only
reuSable PortleSS tanDem contact Sub aSSembly
GN-r33-T095-A
for gib SerieS only
ePic™ moDule ignitor
DT-0425-106
Page 64 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 65 Revised: July 24, 2020 1:30 PM
ENVIRONMENTAL
CARRIER SPECIFICATIONS
HELLFire® Perforating System3-1/8 in (79 mm), Planar, External Scallops
APPLICATION SPECIFICATIONSShot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] 3.46 [87.88] @7.0g
The HELLFire® perforating system allows more effective multi-stage plug-and-perf operations. At just 9.5-inches total length, HELLFire’s three- or six-shot cluster options unlock stage completions not possible with lengthy conventional spiral-phased technology. The short-bodied HELLFire system minimizes wireline tool string length and delivers more clusters per stage. HELLFire’s flexible design options allow engineers to specify ideal cluster count and spacing, resulting in lower costs, fewer stages, maximized injectivity, and optimal proppant placement, all with less equipment and a smaller crane.
Maximum Pressure (psi)[MPa] 16,000 [110.32]Maximum Tensile* (lbf)[kN] 245,200 [1090] *Hardware Calculated Breaking Point
Refer to Components and Accessories for ancillary equipment.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to Shot Approx. Weights (Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm)
GHF31-06C1-3 120°
9.50 24.13 3.87 98.30 1.42 36.07 9.25 lb/ft4-6 60°
Fully Loaded 6-Shot Carrier with attached Tandem Sub 20.0 lb/ft
Page 66 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Short Quick Change Assembly (above top sub) GN-QC31-0001Top Sub, 3-1/8” HF (Wireline) GN-R31HF-QC20-ASwitch Tandem Sub, 3-1/8” HF (Wireline) GN-R31HF-T077-ABottom Sub, 3-1/8” (Wireline)
Lower sub connection o-rings, 3-1/8” Bottom sub shoot-thru plug and o-ring for shoot-thru plug
GN-R31HF-T075ST-AOR-N569-230
GN-R33HF-PLG1 / OR-N569-111O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug, HELLFire Subs and Port Plug O-ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-AGO Style Quick Change (bottom sub connection) EM-QC-QC312-00GOThread Protectors
Carrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Thread Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
Bull Plug, 3-1/8” HF GN-R31HF-0022
HELLFire® Perforating System3-1/8 in (79 mm), Planar, External Scallops
HELLFire® 3-1/8” EXTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 26 EC2-31K0671-26
Fluid
6g, RDXHELLFire 28 EC2-31K0671-28 6g, RDXHELLFire 33 EC2-31K0771-33 7g, RDXHELLFire 36 EC2-31K0771-36 7g, RDXHELLFire 42 EC2-31K0771-42 7g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shotsper cluster 4.5” OD, P110
0.26 [0.66] 7.4 %
3.2 [8.13]0.28 [0.71] 5.5 %0.33 [0.84] 2.9 %0.36 [0.91] 1.6 %0.42 [1.07 ] 3.8 %
IMPORTANT: HELLFire 31K charges are NOT interchangeable with 33K charges. EC2-33K series are for 3-3/8” HELLFire only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subs (ported)Nominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 67 Revised: July 24, 2020 1:30 PM
HELLFire® Perforating System3-3/8 in (86 mm), Planar, Internal Scallops
APPLICATION SPECIFICATIONSShot Density and Phasing Options 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] Ø3.48” [88.39] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 15,000 [103.42]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
The HELLFire® perforating system allows more effective multi-stage plug-and-perf operations. At just 9.5-inches total length, HELLFire’s three- or six-shot cluster options unlock stage completions not possible with lengthy conventional spiral-phased technology. The short-bodied HELLFire system minimizes wireline tool string length and delivers more clusters per stage. HELLFire’s flexible design options allow engineers to specify ideal cluster count and spacing, resulting in lower costs, fewer stages, maximized injectivity, and optimal proppant placement, all with less equipment and a smaller crane.
CARRIER SPECIFICATIONS
Refer to Components and Accessories for ancillary equipment.
toP Sub, hellfire 6-Shot carrier, Switch tanDem SubS, bottom Sub, anD Plug/Shoot aDaPter
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GHF33-061-3 120°
9.50 24.13 3.87 98.30 1.42 36.07 10.00 4.544-6 60°
Fully Loaded 6-Shot Carrier with attached Tandem Sub 24.00 10.89
Page 68 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
LGB3306HF-XXY-33K0771-RX-006005HELLFire® LOADED GUN PART NUMBER DESCRIPTION
LGB3306HF LGB represents a loaded gun assembly for wireline operations. Carrier assembly is 3-3/8” HF series; 06 indicates the number of shots per carrier. XXY These three letters designate the factory-loaded detonator, booster, and detonating cord, in that order. This gun is has no detonator (X) and no booster
(X) and is loaded with A580010 detonating cord (Y). For wireline applications, the second letter is always an X (no booster).33K0771-RX Designates the charge part number without the prefix (e.g., EC2). This gun is loaded with five (5) HELLFire 35 (7.0g, RDX) charges. Charges without the
two-digit suffix will not have the extra two digits in the part number.006005 The first three numbers designate the total number of shots; the next three numbers designate the total number of loaded live charges. In this example,
the gun is loaded with one blank charge (EP-1201-100-D).
HELLFire® Perforating System3-3/8 in (86 mm), Planar, Internal Scallops
HARDWAREGun Body Configuration/Material Threaded and internally scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subs (ported)Nominal OD / Wall Thickness (in)[mm] 3.375” [86] / 0.375” [9.53]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
HELLFire® 3-3/8” INTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 25 EC2-33K0571 Fluid 5.0g, RDXHELLFire 30 EC2-33K0771 Fluid 7.0g, RDXHELLFire 36 EC2-33K0771-RX Fluid 7.0g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shots per cluster 5.5” - 6.0” P-110
0.25 [0.64] 4.3 %3.5 [8.89]0.30 [0.76] 2.7 %
0.36 [0.91] 4.6 %IMPORTANT: HELLFire 33K charges are NOT interchangeable with 31K charges. EC2-31K series are for 3-1/8” HELLFire only. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 69 Revised: July 24, 2020 1:30 PM
HELLFire® Perforating System3-3/8 in (86 mm), Planar, Internal Scallops
Components and Accessories Part Number(s)Short Quick Change Assembly (above top sub) GN-QC31-0001Top Sub, Short Connect 3-3/8” (Wireline) GN-R33HF-QC20-ASwitch Tandem Sub, 3-3/8” (Wireline) GN-R33HF-T077-ACentralizer Ring, 3-3/4” OD GN-R33HF-R375Protector Ring (Lock Ring) GN-R33-R001HFBottom Sub, 3-3/8” (Wireline)
Lower sub connection o-rings, 3-1/8” Bottom sub shoot-thru plug and o-ring for shoot-thru plug
GN-R33HF-T075ST-AOR-N569-230
GN-R33HF-PLG1 / OR-N569-111O-Ring Materials and Size, Nitrile (standard option) OR-N569-231Port Plug, HELLFire Subs and Port Plug O-Ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-APumpdown Crossover Sub, QC Pin X 3.12” Box GN-RX31-QC31Bull Plug, 3-1/8” HF GN-R31HF-0022GO Style Quick Change (bottom sub connection) EM-QC-QC312-00GOThread Protectors
Carrier (Gun) Protector, 3-3/8”Carrier (Gun) Plastic Plug Protector, 3-3/8”Top Sub (Top Pin) Thread Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-3/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-338-030GN-THD-33HF-300GN-THD-312-020GN-THD-338-040GN-THD-312-040
Page 70 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 71 Revised: July 24, 2020 1:30 PM
HELLFire® Perforating System3-3/8 in (86 mm), Planar, External Scallops
APPLICATION SPECIFICATIONSShot Density and Phasing Options 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] Ø3.48” [88.39] @ 7.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 15,000 [103.42]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
The HELLFire® perforating system allows more effective multi-stage plug-and-perf operations. At just 9.5-inches total length, HELLFire’s three- or six-shot cluster options unlock stage completions not possible with lengthy conventional spiral-phased technology. The short-bodied HELLFire system minimizes wireline tool string length and delivers more clusters per stage. HELLFire’s flexible design options allow engineers to specify ideal cluster count and spacing, resulting in lower costs, fewer stages, maximized injectivity, and optimal proppant placement, all with less equipment and a smaller crane.
CARRIER SPECIFICATIONS
Refer to Components and Accessories for ancillary equipment.
toP Sub, hellfire 6-Shot carrier, Switch tanDem SubS, bottom Sub, anD Plug/Shoot aDaPter
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)
GHF33-06C1-3 120°
9.50 24.13 3.87 98.30 1.42 36.07 10.00 4.544-6 60°
Fully Loaded 6-Shot Carrier with attached Tandem Sub 24.00 10.89
Page 72 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
LGB3306HFC-XXY-33K0771-30-006005HELLFire® LOADED GUN PART NUMBER DESCRIPTION
LGB3306HFC LGB represents a loaded gun assembly for wireline operations. Carrier assembly is 3-3/8” HFC series; 06 indicates the number of shots per carrier. XXY These three letters designate the factory-loaded detonator, booster, and detonating cord, in that order. This gun is has no detonator (X) and no booster
(X) and is loaded with A580010 detonating cord (Y). For wireline applications, the second letter is always an X (no booster).33K0771-30 Designates the charge part number without the prefix (e.g., EC2). This gun is loaded with five (5) HELLFire 30 (7.0g, RDX) charges. Charges without the
two-digit suffix will not have the extra two digits in the part number.006005 The first three numbers designate the total number of shots; the next three numbers designate the total number of loaded live charges. In this example,
the gun is loaded with one blank charge (EP-1201-100-D).
HELLFire® Perforating System3-3/8 in (86 mm), Planar, External Scallops
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subs (ported)Nominal OD / Wall Thickness (in)[mm] 3.375” [86] / 0.375” [9.53]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
HELLFire® 3-3/8” EXTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 25 EC2-33K0671-25 Fluid 6.0g, RDXHELLFire 30 EC2-33K0771-30 Fluid 7.0g, RDXHELLFire 33 EC2-33K0771-33 Fluid 7.0g, RDXHELLFire 34 EC2-33K0771-34 Fluid 7.0g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shots per cluster 5.5” OD, P-110
0.25 [0.64] 3.90%
3.5 [8.89]0.30 [0.76] 5.50%0.33 [0.84] 3.60%0.34 [0.86] 5.80%
IMPORTANT: HELLFire 33K charges are NOT interchangeable with 31K charges. EC2-31K series are for 3-1/8” HELLFire only.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 73 Revised: July 24, 2020 1:30 PM
HELLFire® Perforating System3-3/8 in (86 mm), Planar, External Scallops
Components and Accessories Part Number(s)Short Quick Change Assembly (above top sub) GN-QC31-0001Top Sub, Short Connect 3-3/8” (Wireline) GN-R33HF-QC20-ASwitch Tandem Sub, 3-3/8” (Wireline) GN-R33HF-T077-ACentralizer Ring, 3-3/4” OD GN-R33HF-R375Protector Ring (Lock Ring) GN-R33-R001HFBottom Sub, 3-3/8” (Wireline)
Lower sub connection o-rings, 3-1/8” Bottom sub shoot-thru plug and o-ring for shoot-thru plug
GN-R33HF-T075ST-AOR-N569-230
GN-R33HF-PLG1 / OR-N569-111O-Ring Materials and Size, Nitrile (standard option) OR-N569-231Port Plug, HELLFire Subs and Port Plug O-Ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-APumpdown Crossover Sub, QC Pin X 3.12” Box GN-RX31-QC31Bull Plug, 3-1/8” HF GN-R31HF-0022GO Style Quick Change (bottom sub connection) EM-QC-QC312-00GOThread Protectors
Carrier (Gun) Protector, 3-3/8”Carrier (Gun) Plastic Plug Protector, 3-3/8”Top Sub (Top Pin) Thread Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-3/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-338-030GN-THD-33HF-300GN-THD-312-020GN-THD-338-040GN-THD-312-040
Page 74 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 75 Revised: July 24, 2020 1:30 PM
CARRIER SPECIFICATIONS
HELLFire® Perforating System4 in (102 mm), Planar, Internal Scallops
APPLICATION SPECIFICATIONSShot Density and Phasing 1 to 6 shots per cluster, 120° planar phasing
(shots 1-3: 0°, 120°, 240°; shots 4-6: 60°, 180°, 300°)Initiation Point Bottom-fired, wirelineMode of Fire Select fire, addressablePerforating Condition In FluidDetonating Cord 80-grain round, factory-loadedCompatible Perforating Charges HELLFire®
Maximum Gun Swell (in)[mm] 4.60 [116.84] with bur @ 12.0g
ENVIRONMENTALMaximum Pressure (psi)[MPa] 15,000 [103.42]Maximum Tensile* (lbf)[kN] 318,000 [1,414.53] *Hardware Calculated Breaking Point
The HELLFire® perforating system allows more effective multi-stage plug-and-perf operations. HELLFire’s three- and six-shot cluster options unlock stage completions not possible with lengthy conventional spiral-phased technology. The short-bodied HELLFire system minimizes wireline tool string length and delivers more clusters per stage. HELLFire’s flexible design options allow engineers to specify ideal cluster count and spacing, resulting in lower costs, fewer stages, maximized injectivity, and optimal proppant placement, all with less equipment and a smaller crane.
toP Sub, hellfire 6-Shot carrierS, Switch tanDem SubS, bottom Sub, anD Plug/Shoot aDaPter
Refer to Components and Accessories for ancillary equipment.
Carrier Assembly Part Number
Shot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0°Distance Shot
to ShotApprox. Weights
(Fully Loaded) (lb/ft)# Shots Phasing (in) (cm) (in) (mm) (in) (mm) Carrier w/Attached Sub
HF40-40K-N03 1-3 120° 9.00 22.86 3.80 96.52 N/A 12.5 33.0HF40-40K-N06 4-6 60° 11.00 27.94 4.75 120.65 1.50 38.10 15.75 36.25
Page 76 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Short Quick Change Assembly (above top sub) GN-QC31-0001Top Sub, Compact 4” (Wireline) GN-R40HC-CQC20-ASwitch Tandem Sub, 4” (Wireline) GN-R40HC-T077-ACentralizer Ring/Protector (Lock) Ring Not Applicable for 4” OD HELLFireBottom Sub, 4” (Wireline)
Lower sub connection o-rings, 3-1/8” Bottom sub shoot-thru plug and o-ring for shoot-thru plug
GN-R40HC-T075ST2-AOR-N569-230
GN-R40HC-PLG1 / OR-N569-214O-Ring Materials and Size, Nitrile (standard option) OR-N569-236Port Plug, HELLFire Subs and Port Plug O-ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-APumpdown Crossover Sub, QC Pin X 3.12” Box GN-RX31-QC31GO Style Quick Change (bottom sub connection) EM-QC-QC312-00GOThread Protectors
Carrier (Gun) Protector, 4”Carrier (Gun) Plastic Plug Protector, 4”Top Sub (Top Pin) Thread Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 4”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-400-030GN-THD40-308
GN-THD-312-020GN-THD-400-040GN-THD-312-040
Bull Plug, 3-1/8” HF GN-R31HF-0022
HELLFire® Perforating System4 in (102 mm), Planar, Internal Scallops
HELLFire® 4” INTERNAL SCALLOPSProduct Name Part Number Perforating
Condition Explosive
HELLFire 40 EC2-40K1271 Fluid 12g, RDX
API Performance
Shot Density API 19B Targeted Pipe
Entrance Hole (in)[cm]
EHD Variation
Rock PenetrationAPI 19B-Sec. 2 (in)[cm]
1 to 6 shots per cluster
6.0” OD, 26# P-110 0.40 [1.02] 3.9% 3.00 [7.62]
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
HARDWAREGun Body Configuration/Material Threaded and internally scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab retentionType of Tandem Connection Switch tandem subs (ported)Nominal OD / Wall Thickness (in)[mm] 4.00 [101.60] / 0.375 [9.53]Upper/Lower Thread Connections 3.4375” 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 77 Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-1/8 in (79 mm), GWA Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to 14 shots per carrierInitiation Point Bottom-fired, wireline, slickline, or tubingMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Basix Frac, Connex®, Razor®, and Refrax™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 22.7g In Fluid; 3.60 [91.44] @ 19.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [137.90]Maximum Tensile* (lbf)[kN] 245,000 [1089.81] *Hardware Calculated Breaking Point
GEODynamics delivers a Limited Entry Perforating System for unconventional reservoirs. FracIQ® PRO provides constant casing hole sizes, regardless of decentralized position, casing size, weight, and grade, for optimal pressure drop during Frac. With a constant entry hole and penetration, each cluster can be treated more efficiently. Subsequent stages and wells can then be further optimized for limited entry fracture stimulation. FracIQ PRO provides superior perforation efficiency during fracture stimulation when compared to conventional perforators which traditionally exhibit a higher entry hole diameter variance across shot phasings.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing
Options Gun Lengths Gun End to Center of First Scallop @ 0°
Distance Shot to Shot
Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GWA31-O002 2 0° 15 38.1 6.0 152.4 3.0 76.20 13.0 5.9GWA31-J002 180° 15 38.1 6.0 152.4 3.0 76.20 13.0 5.9GWA31-O003 3 0° 18 45.72 6.0 152.4 3.0 76.20 15.5 7.0GWA31-G003 120° 18 45.72 6.0 152.4 3.0 76.20 15.5 7.0GWA31-B004 4 90° 18 45.72 6.0 152.4 2.0 50.80 15.5 7.0GWA31-P005S 5 72° 20 50.80 6.0 152.4 2.0 50.80 17.5 7.9GWA31-J005 180° 22 55.88 6.2 157.48 2.4 60.96 19.0 8.6GWA31-A006 6 60° 22 55.88 6.0 152.4 2.0 50.80 19.0 8.6
GWA31-A007T 7 60° 24 60.96 6.0 152.4 2.0 50.80 20.7 9.3GWA31-P007S 51.4° 24 60.96 6.0 152.4 2.0 50.80 20.7 9.3GWA31-R008 8 90° + 45° 26 66.04 6.0 152.4 2.0 50.80 22.4 10.1GWA31-A010 10 60° 30 76.20 6.0 152.4 2.0 50.80 26.2 11.8GWA31-R010 72° + 36° 30 76.20 6.0 152.4 2.0 50.80 26.2 11.8GWA31-R012 12 60° + 30° 34 86.36 6.0 152.4 2.0 50.80 29.4 13.2GWA31-A013 13 60° 36 91.44 6.0 152.4 2.0 50.80 31.1 14.0GWA31-R014 14 51.4° + 25.7° 38 96.52 6.0 152.4 2.0 50.80 32.8 14.8
Refer to Components and Accessories for ancillary equipment.
Page 78 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-1/8 in (79 mm), GWA Spiral
FracIQ®
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
Basix™ GOOD HOLE, BIG HOLE, DEEP PENETRATING Product Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941 ‡ Fluid or Dry 19.0g, RDXEC2-33A2341 Fluid 22.7g, RDX
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDXEC2-33A2332 22.7g, HMX
3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 ‡ Fluid or Dry 19.0g, RDX
3323 Basix XDP EC2-33A2321 Fluid 22.7g, RDXEC2-33A2321-E 22.7g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]
0.60 [1.52] 28.55 [72.52] API RP 43* * ** * ** * *
0.43 [1.09] 35.80 [90.93] API RP430.51 [1.30] 42.07 [106.86] API RP 43
* 29.20 [74.17] QC0.54 [1.37] * *0.42 [1.07] 46.01 [116.87] API RP 43
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDXFracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°
4.5-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1%0.32 [0.81] 4.6 %0.34 [0.86] 3.8 %0.37 [0.94] 3.4 %0.37 [0.94] 3.0 %0.42 [1.07] 3.5 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5-5.5” OD 0.50 [1.27] 1.5%
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8%
6 spf / 60° 4.5-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91 ] 2.5 %0.40 [1.02] 3.3 %
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 79 Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-1/8 in (79 mm), GWA Spiral
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex XEH EC2-33A1941-RC ‡ Fluid or Dry 19.0g, RDXEC2-33A1942-RC 19.0g, HMX
3319 Connex RX EC2-33A1991-RX ‡ Fluid or Dry 19.0g, RDXEC2-33A1992-RX 19.0g, HMX
3323 Connex EC2-33A2321-RC Fluid 22.7g, RDXEC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2341-RC Fluid 22.7g, RDXEC2-33A2342-RC 22.7g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 4.5 [11.43]
* * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
* * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]0.40 [1.02] * 15.60 [39.62]0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
* * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9%0.50 [1.27] 4.8 %
Basix™ Frac CONSTANT ENTRY HOLE AND PENETRATION
Page 80 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-1/8 in (79 mm), GWA Spiral
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Refrax™ Product Name Part Number Perforating
Condition Explosive
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3320 Refrax EC2-33A2071-D 20.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60°
Expanded 4.0” P110
0.33-0.33 [0.84-0.84]5.5” P110
0.30-0.30 [0.76-0.76]0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
4.5” P110 0.30-0.32 [0.76-0.81] 7.0” P110 0.39-0.41 [0.99-1.04]0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Razor® EXTREME DEEP PENETRATINGShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 43
0.42 [1.07] 39.02 [99.11] API RP 43
Product Name Part Number Perforating Condition Explosive
3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMXEC2-33A2322-E‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 81 Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
Top Subs, 3-1/8”, PortedTop Sub Assembly, Ported, SQC Connection (recommended)Top Sub Assembly, Ported (connects to industry-standard quick change)
GN-R31-CQC20-AGN-R31-T080-A
Top Sub, 3-1/8”, Conventional and TCPWireline Insert & O-Ring Spring Contact Assembly
GN-R31-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 3-1/8”, Conventional and TCP GN-R31-0021Switch Tandem Subs, 3-1/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R31-T150-AGN-R31-T101-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R31-T150L-AGN-R31-T150R-AGN-R31-T109R-A
Locking Rings, 3-1/8” Tandem SubsLeft-Hand Thread, HDRight-Hand Thread, HD
GN-R31-L001-319GN-R31-R001-319
O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-ABull Plugs
3-1/8” Standard 3-1/8” with 2-3/8” EUE Pin3-1/8” with 2-7/8” EUE Pin
GN-R31-0022GN-R31-0023GN-R31-0024
Thread ProtectorsCarrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
toP Sub, SQc connection
GN-r31-CQC20-A
Plug/Shoot aDaPter
GN-r31-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring GN-r31-T150l-A
bull Plug, StanDarD
GN-r31-0022
Switch Sub aSSembly GN-r31-T150-A
FracIQ® PRO Perforating System3-1/8 in (79 mm), GWA Spiral
Page 82 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 83 Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-3/8 in (86 mm), GWA Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to 14 shots per carrierInitiation Point Bottom-fired, wireline, slickline, or tubingMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 3.56 [90.42] @ 25.00g In Fluid; 3.63 [92.20] @ 22.7g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,700 [156.51]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
GEODynamics delivers a Limited Entry Perforating System for unconventional reservoirs. FracIQ® PRO provides constant casing hole sizes, regardless of decentralized position, casing size, weight, and grade, for optimal pressure drop during Frac. With a constant entry hole and penetration, each cluster can be treated more efficiently. Subsequent stages and wells can then be further optimized for limited entry fracture stimulation. FracIQ PRO provides superior perforation efficiency during fracture stimulation when compared to conventional perforators which traditionally exhibit a higher entry hole diameter variance across shot phasings.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0° Distance Shot to Shot Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GWA33-O002 2 0° 14 35.56
6.0 152.4
2.0 50.80 13.0 5.9GWA33-J002 180° 15 38.1 3.0 76.20 13.0 5.9GWA33-G003 3 120° 18 45.72 3.0 76.20 15.5 7.0GWA33-B004 4 90° 18 45.72 2.0 50.80 15.5 7.0GWA33-P005S 5 72° 20 50.80 2.0 50.80 17.5 7.9GWA33-J005 180° 22 55.88 2.0 50.80 19.0 8.6GWA33-A006 6 60° 22 55.88 2.0 50.80 19.0 8.6
GWA33-A007T 7 60° 24 60.96 2.0 50.80 20.7 9.3GWA33-P007S 51.4° 24 60.96 2.0 50.80 20.7 9.3GWA33-R008 8 90° + 45° 26 66.04 2.0 50.80 22.4 10.1GWA33-A010 10 60° 30 76.20 2.0 50.80 26.2 11.8GWA33-R010 72° + 36° 30 76.20 2.0 50.80 26.2 11.8GWA33-R012 12 60° + 30° 34 86.36 2.0 50.80 29.4 13.2GWA33-R014 14 51.4° + 25.7° 38 96.52 2.0 50.80 32.8 14.8
Refer to Components and Accessories for ancillary equipment.
Page 84 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-3/8 in (86 mm), GWA Spiral
FracIQ®
Basix™ BIG HOLE and GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDX3323 Basix GH EC2-33A2341 In Fluid or Dry 22.7g, RDX3325 Basix GH EC2-33B2541 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 7.0 [17.78] 0.74 [1.88] 7.13 [18.11] API RP 43
6 spf / 60° 4-1/2 [11.43]0.52 [1.32] 33.58 [85.29]
API RP 430.57 [1.45] 25.91 [65.81]
Basix™ DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Basix DP EC2-33A2351 In Fluid or Dry 22.7g, RDX3323 Basix XDP EC2-33A2321-E In Fluid or Dry 22.7g, RDX3325 Basix XDP EC2-33B2521-E Fluid 25.0g, RDX3325 Basix XDP EC2-33B2521 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43]
0.47 [1.19] 32.10 [81.53] QC0.45 [1.14] 46.32 [117.65] API RP 430.45 [1.14] 50.08 [127.20] API RP 430.45 [1.14] 44.58 [113.23] API RP 43
Product Name Part Number Perforating Condition Explosive
3323 Razor XDP EC2-33A2322 In Fluid or Dry 22.7g, HMX3325 Razor XDP EC2-33B2522 Fluid 25.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43] 0.45 [1.14] 46.32 [117.65] API RP 436 spf / 60° 4-1/2 [11.43] 0.53 [1.35] 47.30 [120.14] API RP 19B
Razor® DEEP PENETRATING
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°4.5”-5.5” OD 0.22 [0.56] 5.5%
5.0 [12.70]6.0” OD P110 0.26 [0.66] 2.3%
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 85 Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-3/8 in (86 mm), GWA Spiral
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex RX EC2-33A1992-RXIn Fluid or Dry
19.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2342-RC 22.7g, HMX3325 Connex EC2-33B2522-RC
Fluid25.0g, HMX
3325 Connex XEH EC2-33B2542-RC 25.0g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
5-1/2 [13.97] 0.42 [1.07] 0.32 [0.81] 11.60 [29.46]
4-1/2 [11.43]0.47 [1.19] 0.46 [1.17] 15.31 [38.89]0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
4-1/2 [11.43]0.53 [1.35] 0.48 [1.22] 15.45 [39.24]0.54 [1.37] 0.40 [1.02] 14.92 [37.90]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.375 [85.73] / 0.3775 [9.59]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 86 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
FracIQ® PRO Perforating System3-3/8 in (86 mm), GWA Spiral
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub, 3-3/8”, Conventional and TCP
Wireline Insert & O-Ring Spring Contact AssemblyTop Sub, WirelineTop Sub, Ported, SQC Connection
GN-R33-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020GN-R33-0035
GN-R33-CQC20-ATop Sub Lift Sub Assembly, 3-3/8” TC-LT33-000Tandem Sub, 3-3/8”, Conventional and TCP GN-R33-0021Switch Tandem Subs, 3-3/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R33-T150-AGN-R33-T100-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R33-T150L-AGN-R33-T150R-AGN-R33-T109R-A
Locking Rings, 3-3/8” Tandem SubsLeft-Hand ThreadRight-Hand Thread
GN-R33-L001GN-R33-R001
O-Ring Materials and Size Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-231OR-V95G-231OR-B231-2870
Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-3/8” Standard 3-3/8” with 2-3/8” EUE Pin3-3/8” with 2-7/8” EUE Pin
GN-R33-0022GN-R33-0023GN-R33-0024
Plug/Shoot Adapter, 3-3/8” GN-R33-ST30-AThread Protectors, 3-3/8”
Top Sub (Top Pin)Carrier (Gun) Plastic Plug ProtectorCarrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-338-100GN-THD-338-030GN-THD-338-040
toP Sub, SQc connection
GN-r33-CQC20-A
Plug/Shoot aDaPter
GN-r33-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring
GN-r33-T150l-A
bull Plug, StanDarD
GN-r33-0022
toP Sub
GN-r33-0020
toP Sub, wireline
GN-r33-0035
Switch tanDem Sub GN-r33-T150
tanDem Sub
GN-r33-0021
Switch tanDem Sub aSSy
GN-r33-T100-A
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 87 Revised: July 24, 2020 1:30 PM
SandIQ® PRO Perforating System3-1/8 in (79 mm), GT Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to eight (8) shots per carrierInitiation Point Bottom-fired, wirelineMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges SandIQ®
Maximum Gun Swell (in)[mm] 3.46 [87.88] @22.7g In Fluid
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,500 [155.13]Maximum Tensile* (lbf)[kN] 245,200 [1090.70] *Hardware Calculated Breaking Point
GEODynamics’ SandIQ® PRO technology provides an “off ramp” for more efficient diversion of proppant. Perforating tunnels are tilted 45 degrees in direction of fluid flow. Angled holes are engineered to create a physical diversion on toe side of casing for proppant to naturally flow into the formation. SandIQ shaped charges are engineered to produce precision holes in casing size, weights, and grades which are used in unconventional wells.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0° Distance Shot to Shot Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GT31-45-J002A 2 180° 18 45.72 5.03 127.76 4.50 114.30 19.0 8.62GT31-45-G003A 3 120° 24 60.96 5.036 127.91 varies 23.0 10.43GT31-45-B004A 4 90° 27 68.58 5.036 127.91 varies 26.0 11.79GT31-45-A006A 6 60° 30 76.20 5.03 127.76 3.50 88.90 29.0 13.15GT31-45-A008A 8 60° 38 96.52 6.03 153.16 3.50 88.90 37.0 16.78
Refer to Components and Accessories for ancillary equipment.
Page 88 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
SandIQ® PRO Perforating System3-1/8 in (79 mm), GT Spiral
Product Name Part Number Perforating Condition Explosive
SandIQ B EC2-33A1371-SB
Fluid
13.0g, RDXSandIQ C EC2-33A1671-SC 16.0g RDXSandIQ D EC2-33A1671-SD 16.0g, RDXSandIQ E EC2-33A2071-SE 20.0g, RDXSandIQ F EC2-33A2371-SF 23.0g, RDXSandIQ G EC2-33A2371-SG 23.0g, RDX
SandIQ D EC2-33A1672-SDFluid
16.0g, HMXSandIQ E EC2-33A2072-SE 20.0g, HMXSandIQ F EC2-33A2372-SF 23.0g, HMX
API PerformancePhasing /
Charge Tilt Angle
API 19B Targeted
Pipe*
Nominal Entry Hole
(in)[cm]
Casing Entry Hole @ 45°
(in)[cm]
EHD Variation Decentralized
at 45°
Rock Penetration API 19B-Sec. 2
(in)[cm]60° / 45°
5.5” OD P-110
0.25 [0.64] 0.28 [0.71] 4.2 %
5.0 [12.70]
60° / 45° 0.30 [0.76] 0.31 [0.79] 3.8 %60° / 45° 0.35 [0.89] 0.38 [0.97] 2.6 %60° / 45° 0.40 [1.02] 0.42 [1.07] 3.7 %60° / 45° 0.45 [1.14] 0.44 [1.12] 1.0 %60° / 45° 0.50 [1.27] 0.51 [1.30] 5.2%
60° / 45°5.5” OD P-110
0.35 [0.89] 0.35 [0.89] 1.7 %5.0 [12.70]60° / 45° 0.40 [1.02] 0.41 [1.04] 4.8 %
60° / 45° 0.45 [1.14] 0.43 [1.09] 6.0 %
SandIQ®
*3-1/8” SandIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94] Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 89 Revised: July 24, 2020 1:30 PM
SandIQ® PRO Perforating System3-1/8 in (79 mm), GT Spiral
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
Top Subs, 3-1/8”, PortedTop Sub Assembly, Ported, SQC Connection (recommended)Top Sub Assembly, Ported (connects to industry-standard quick change)
GN-R31-CQC20-AGN-R31-T080-A
Top Sub, 3-1/8”, Conventional and TCPWireline Insert & O-Ring Spring Contact Assembly
GN-R31-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 3-1/8”, Conventional and TCP GN-R31-0021Switch Tandem Subs, 3-1/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R31-T150-AGN-R31-T101-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R31-T150L-AGN-R31-T150R-AGN-R31-T109R-A
Locking Rings, 3-1/8” Tandem SubsLeft-Hand Thread, HDRight-Hand Thread, HD
GN-R31-L001-319GN-R31-R001-319
O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-ABull Plugs
3-1/8” Standard 3-1/8” with 2-3/8” EUE Pin3-1/8” with 2-7/8” EUE Pin
GN-R31-0022GN-R31-0023GN-R31-0024
Thread ProtectorsCarrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
toP Sub, SQc connection
GN-r31-CQC20-A
Plug/Shoot aDaPter
GN-r31-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring GN-r31-T150l-A
bull Plug, StanDarD
GN-r31-0022
Switch Sub aSSembly GN-r31-T150-A
Page 90 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 91 Revised: July 24, 2020 2:05 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options; one (1) to 19 shots per carrierInitiation Point Bottom-fired, wireline, slickline, or tubingMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Razor®, Connex®, and Refrax™Maximum Gun Swell (in)[mm] 2.91 [73.91] @ 15.0g In Fluid; 3.02 [76.20] @ 15.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 25,000 [172.37]Maximum Tensile* (lbf)[kN] 176,600 [785.56] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Short Guns2-3/4 in (70 mm), GLB Spiral
Refer to Components and Accessories for ancillary equipment.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0° Distance Shot to Shot Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GLB27-O001 1 0° 12 30.48 6.0 152.4 N/A 11.0 5.0GLB27-J002 2 180° 15 38.10 6.0 152.4 3.0 76.20 13.0 10.0GLB27-G003 3
120°
18 45.72
6.0 152.4
3.0 76.20 15.0 8.0GLB27-G004 4 18 45.72
2.0 50.80
15.0 8.0GLB27-G007 7 24 60.96 21.0 10.0GLB27-G010 10 30 76.20 27.0 12.0GLB27-G013 13 36 91.44 30.0 14.0GLB27-G016 16 42 106.68 35.0 16.0GLB27-G019 19 48 121.92 39.0 18.0GLB27-A002 2
60°
15 38.10
6.0 152.4 2.0 50.80
13.0 10.0GLB27-A007 7 24 60.96 21.0 10.0GLB27-A010 10 30 76.20 27.0 12.0GLB27-A013 13 36 91.44 30.0 14.0GLB27-A016 16 42 106.68 35.0 16.0GLB27-A019 19 48 121.92 39.0 18.0
Page 92 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
Conventional Short Guns2-3/4 in (70 mm), GLB Spiral
Basix™ and Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2715 Basix XDP EC2-27A1521 In Fluid or Dry 15.0g, RDX
2715 Razor XDP EC2-27A1522 In Fluid or Dry 15.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 43
6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
2715 Connex EC2-27A1522-RC In Fluid or Dry 15.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 4-1/2 [11.43] 0.39 [0.99] 0.34 [0.86] 12.18 [30.94]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Refrax™Product Name Part Number Perforating
Condition Explosive
2711 Refrax EC2-27A1171-R Fluid 11.0g, RDX
2715 Refrax EC2-27A1571-R Fluid 15.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 4.0” P110 0.29-0.30 [0.74-0.76] 5.5” P110 0.37-0.41 [0.94-1.04]
6 spf / 60° 4.0” P110 0.34-0.36 [0.86-0.91] 5.5” P110 0.34-0.42 [0.86-1.07]GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 30 EC2-27A1171 Fluid 11.0g, RDX
FracIQ 35 EC2-27A1271 Fluid 12.0g, RDX
FracIQ 40 EC2-27A1571 Fluid 15.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” P110 0.30 [0.76] 2.7 %
5.0 [12.70]6 spf / 60° 4.5” P110 0.35 [0.89] 5.9 %
6 spf / 60° 4.5” P110 0.40 [1.02] 6.3 %
FracIQ®
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 93 Revised: July 24, 2020 2:05 PM
Conventional Short Guns2-3/4 in (70 mm), GLB Spiral
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 2.75” [69.85] / 0.313 [7.95]Upper/Lower Thread Connections 2.375” - 6P ACME 2G; refer to Components and Accessories for ancillary equipment.
Components and Accessories Part Number(s)Top Subs, 2-3/4”
Top Sub, TCPTop Sub, Wireline
GN-R27-0020GN-R27-0035
Top Sub Lift Sub Assembly, 2-3/4” and 2-7/8” TC-QC27-000Tandem Subs, 2-3/4”
Tandem Sub, TCPSwitch Tandem Sub, Wireline, Ported, 3” make-up lengthAligning Switch Sub, LH Lock Ring
GN-R27-0021GN-R27-T100-AGN-R27-T125-A
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-225OR-V95G-225OR-B225-2160
Gun ConnectionOR-N569-227OR-V95G-227OR-B227-2405
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-QC27-020GN-THD-275-030GN-THD-275-040
Bull Plugs2-3/4” Standard2-3/4” with 2-3/8” EUE Pin2-3/4” Shoot-Thru2-3/4” Shoot-Thru Assembly (GN-R27-T150-A and GN-R27-ST27)
GN-R27-0022GN-R27-0023GN-R27-ST27GN-R27-ST30
Page 94 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 95 Revised: July 24, 2020 1:30 PM
Conventional Short Guns3-1/8 in (79 mm), GLB Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, one (1) to 14 shots per carrierInitiation Point Bottom-fired, wireline, slickline, or tubingMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Basix Frac, Connex®, Razor®, and Refrax™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 22.7g In Fluid; 3.60 [91.44] @ 19.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,500 [155.13]Maximum Tensile* (lbf)[kN] 245,200 [1090.70] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0° Distance Shot to Shot Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GLB31-O002 2 0° 15 38.1 6.0 152.4 3.0 76.20 15.0 6.8GLB31-J002 180° 15 38.1 6.0 152.4 3.0 76.20 15.0 6.8GLB31-O003 3 0° 18 45.72 6.0 152.4 3.0 76.20 18.0 8.2GLB31-G003 120° 18 45.72 6.0 152.4 3.0 76.20 18.0 8.2GLB31-B004 4 90° 18 45.72 6.0 152.4 2.0 50.80 18.0 8.2GLB31-P005S 5 72° 20 50.80 6.0 152.4 2.0 50.80 20.0 9.0GLB31-A005 60° 20 50.80 6.0 152.4 2.0 50.80 20.0 9.0GLB31-A006 6 60° 22 55.88 6.0 152.4 2.0 50.80 22.0 10.0GLB31-O006 0° 22 55.88 6.0 152.4 2.0 50.80 22.0 10.0GLB31-A007T 7 60° 24 60.96 6.0 152.4 2.0 50.80 24.0 10.9GLB31-R008 8 90° + 45° 26 66.04 6.0 152.4 2.0 50.80 26.0 11.8GLB31-A010 10 60° 30 76.20 6.0 152.4 2.0 50.80 30.0 13.5GLB31-R010 72° 30 76.20 6.0 152.4 2.0 50.80 30.0 13.5GLB31-A013 13 60° 36 91.44 6.0 152.4 2.0 50.80 36.0 16.0
Refer to Components and Accessories for ancillary equipment.
Page 96 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Short Guns3-1/8 in (79 mm), GLB Spiral
FracIQ®
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
Basix™ GOOD HOLE, BIG HOLE, DEEP PENETRATING Product Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941 ‡ Fluid or Dry 19.0g, RDXEC2-33A2341 Fluid 22.7g, RDX
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDXEC2-33A2332 22.7g, HMX
3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 ‡ Fluid or Dry 19.0g, RDX
3323 Basix XDP EC2-33A2321 Fluid 22.7g, RDXEC2-33A2321-E 22.7g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]
0.60 [1.52] 28.55 [72.52] API RP 43* * ** * ** * *
0.43 [1.09] 35.80 [90.93] API RP430.51 [1.30] 42.07 [106.86] API RP 43
* 29.20 [74.17] QC0.54 [1.37] * *0.42 [1.07] 46.01 [116.87] API RP 43
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDXFracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°
4.5-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1%0.32 [0.81] 4.6 %0.34 [0.86] 3.8 %0.37 [0.94] 3.4 %0.37 [0.94] 3.0 %0.42 [1.07] 3.5 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5-5.5” OD 0.50 [1.27] 1.5%
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8%
6 spf / 60° 4.5-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91 ] 2.5 %0.40 [1.02] 3.3 %
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 97 Revised: July 24, 2020 1:30 PM
Conventional Short Guns3-1/8 in (79 mm), GLB Spiral
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex XEHEC2-33A1941-RC
‡ Fluid or Dry19.0g, RDX
EC2-33A1942-RC 19.0g, HMX
3319 Connex RXEC2-33A1991-RX
‡ Fluid or Dry19.0g, RDX
EC2-33A1992-RX 19.0g, HMX
3323 ConnexEC2-33A2321-RC
Fluid22.7g, RDX
EC2-33A2322-RC 22.7g, HMX
3323 Connex XEHEC2-33A2341-RC
Fluid22.7g, RDX
EC2-33A2342-RC 22.7g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 4.5 [11.43]
* * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
* * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]
* * *0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
* * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9%0.50 [1.27] 4.8 %
Basix™ Frac CONSTANT ENTRY HOLE AND PENETRATION
Page 98 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Short Guns3-1/8 in (79 mm), GLB Spiral
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Refrax™Product Name Part Number Perforating
Condition Explosive
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3320 Refrax EC2-33A2071-D 20.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° Expanded 4.0” P110
0.33-0.33 [0.84-0.84]5.5” P110
0.30-0.30 [0.76-0.76]0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
6 spf / 60° 4.5” P110 0.30-0.32 [0.76-0.81] 7.0” P110 0.39-0.41 [0.99-1.04]0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Razor® EXTREME DEEP PENETRATINGShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 43
0.42 [1.07] 39.02 [99.11] API RP 43
Product Name Part Number Perforating Condition Explosive
3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMXEC2-33A2322-E‡ For 19g in dry gas, shot density is limited to one- (1) and two- (2) shot guns only. .
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 99 Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
Top Subs, 3-1/8”, PortedTop Sub Assembly, Ported, SQC Connection (recommended)Top Sub Assembly, Ported (connects to industry-standard quick change)
GN-R31-CQC20-AGN-R31-T080-A
Top Sub, 3-1/8”, Conventional and TCPWireline Insert & O-Ring Spring Contact Assembly
GN-R31-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 3-1/8”, Conventional and TCP GN-R31-0021Switch Tandem Subs, 3-1/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R31-T150-AGN-R31-T101-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R31-T150L-AGN-R31-T150R-AGN-R31-T109R-A
Locking Rings, 3-1/8” Tandem SubsLeft-Hand Thread, HDRight-Hand Thread, HD
GN-R31-L001-319GN-R31-R001-319
O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-1/8” Standard 3-1/8” with 2-3/8” EUE Pin3-1/8” with 2-7/8” EUE Pin
GN-R31-0022GN-R31-0023GN-R31-0024
Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-AThread Protectors
Carrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
toP Sub, SQc connection
GN-r31-CQC20-A
Plug/Shoot aDaPter
GN-r31-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring GN-r31-T150l-A
bull Plug, StanDarD
GN-r31-0022
Switch Sub aSSembly GN-r31-T150-A
Conventional Short Guns3-1/8 in (79 mm), GLB Spiral
Page 100 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 101 Revised: July 24, 2020 1:52 PM
Conventional Short Guns3-3/8 in (86 mm), GLB Spiral
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot & Phasing Options, two (2) to 14 shots per carrierInitiation Point Bottom-fired, wireline, slickline, or tubingMode of Fire Mechanical or addressable, select fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 3.56 [90.42] @ 25.00g In Fluid; 3.63 [92.20] @ 22.7g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,700 [156.51]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
CARRIER SPECIFICATIONSCarrier Assembly
Part NumberShot & Phasing Options Gun Lengths Gun End to Center of
First Scallop @ 0° Distance Shot to Shot Shipping Assembly Weight
# Shots Phasing (in) (cm) (in) (mm) (in) (mm) (lbs) (kgs)GLB33-J002 2 180° 15 38.10
6.00 152.40
3.0 76.20 21.0 9.5GLB33-G003 3 120° 18 45.72 25.0 11.3GLB33-B004 4 90° 18 45.72
2.0 50.80
25.0 11.3GLB33-P005S 5 72° 20 50.80 28.0 12.6GLB33-A006 6 60° 22 55.88 31.0 14.0
GLB33-A007T 7 60° 24 60.96 34.0 15.3GLB33-P007S 51.4° 24 60.96 34.0 15.3GLB33-R008 8 90° + 45° 26 66.04 36.0 16.2GLB33-A010 10 60° 30 76.20 42.0 18.9GLB33-R010 72° 30 76.20 42.0 18.9GLB33-R012 12 60° + 30° 34 86.36 48.0 21.6GLB33-R014 14 51.4° + 25.7° 38 96.52 53.0 23.9
Refer to Components and Accessories for ancillary equipment.
Page 102 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:52 PM
Conventional Short Guns3-3/8 in (86 mm), GLB Spiral
FracIQ®
Basix™ BIG HOLE and GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDX3323 Basix GH EC2-33A2341 In Fluid or Dry 22.7g, RDX3325 Basix GH EC2-33B2541 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 7.0 [17.78] 0.74 [1.88] 7.13 [18.11] API RP 43
6 spf / 60° 4-1/2 [11.43]0.52 [1.32] 33.58 [85.29]
API RP 430.57 [1.45] 25.91 [65.81]
Basix™ DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Basix DP EC2-33A2351 In Fluid or Dry 22.7g, RDX3323 Basix XDP EC2-33A2321-E In Fluid or Dry 22.7g, RDX3325 Basix XDP EC2-33B2521-E Fluid 25.0g, RDX3325 Basix XDP EC2-33B2521 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43]
0.47 [1.19] 32.10 [81.53] QC0.45 [1.14] 46.32 [117.65] API RP 430.45 [1.14] 50.08 [127.20] API RP 430.45 [1.14] 44.58 [113.23] API RP 43
Product Name Part Number Perforating Condition Explosive
3323 Razor XDP EC2-33A2322 In Fluid or Dry 22.7g, HMX3325 Razor XDP EC2-33B2522 Fluid 25.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43] 0.45 [1.14] 46.32 [117.65] API RP 436 spf / 60° 4-1/2 [11.43] 0.53 [1.35] 47.30 [120.14] API RP 19B
Razor® DEEP PENETRATING
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°4.5”-5.5” OD 0.22 [0.56] 5.5%
5.0 [12.70]6.0” OD P110 0.26 [0.66] 2.3%
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 103 Revised: July 24, 2020 1:52 PM
Conventional Short Guns3-3/8 in (86 mm), GLB Spiral
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex RX EC2-33A1992-RXIn Fluid or Dry
19.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2342-RC 22.7g, HMX3325 Connex EC2-33B2522-RC
Fluid25.0g, HMX
3325 Connex XEH EC2-33B2542-RC 25.0g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
5-1/2 [13.97] 0.42 [1.07] 0.32 [0.81] 11.60 [29.46]
4-1/2 [11.43]0.47 [1.19] 0.46 [1.17] 15.31 [38.89]0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
4-1/2 [11.43]0.53 [1.35] 0.48 [1.22] 15.45 [39.24]0.54 [1.37] 0.40 [1.02] 14.92 [37.90]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.375 [85.73] / 0.3775 [9.59]Upper/Lower Thread Connections 2.8125” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 104 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:52 PM
Conventional Short Guns3-3/8 in (86 mm), GLB Spiral
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub, 3-3/8”, Conventional and TCP
Wireline Insert & O-Ring Spring Contact AssemblyTop Sub, WirelineTop Sub, Ported, SQC Connection
GN-R33-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020GN-R33-0035
GN-R33-CQC20-ATop Sub Lift Sub Assembly, 3-3/8” TC-LT33-000Tandem Sub, 3-3/8”, Conventional and TCP GN-R33-0021Switch Tandem Subs, 3-3/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R33-T150-AGN-R33-T100-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R33-T150L-AGN-R33-T150R-AGN-R33-T109R-A
Locking Rings, 3-3/8” Tandem SubsLeft-Hand ThreadRight-Hand Thread
GN-R33-L001GN-R33-R001
O-Ring Materials and Size Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-231OR-V95G-231OR-B231-2870
Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-3/8” Standard 3-3/8” with 2-3/8” EUE Pin3-3/8” with 2-7/8” EUE Pin
GN-R33-0022GN-R33-0023GN-R33-0024
Plug/Shoot Adapter, 3-3/8” GN-R33-ST30-AThread Protectors, 3-3/8”
Top Sub (Top Pin)Carrier (Gun) Plastic Plug ProtectorCarrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-338-100GN-THD-338-030GN-THD-338-040
toP Sub, SQc connection
GN-r33-CQC20-A
Plug/Shoot aDaPter
GN-r33-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring
GN-r33-T150l-A
bull Plug, StanDarD
GN-r33-0022
toP Sub
GN-r33-0020
toP Sub, wireline
GN-r33-0035
Switch tanDem Sub GN-r33-T150
tanDem Sub
GN-r33-0021
Switch tanDem Sub aSSy
GN-r33-T100-A
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 105 Revised: July 24, 2020 1:30 PM
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [138]Maximum Tensile* (lbf)[kN] 88,100 [392] *Hardware Calculated Breaking Point
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 40-grain ribbon; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Razor®and Circulating ChargesMaximum Gun Swell (in)[mm] 1.69” [43] @ 3.2g (In Fluid); 1.69” [43] @ 2.9g (Dry)
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns1-9/16 in (40 mm), RTG, 4 and 6 SPF, DP
0°
2”
12”
60° 180°120° 240° 300° 360°caSing Shot Pattern anD PhaSing at 6 SPf 60°CARRIER SPECIFICATIONS
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA1606-7915A-A084. See Available Gun Lengths.
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Loaded BlankGA1604-7915A-O***
4 spf [13 spm]0°
6.00 152.40 3.00 76.20GA1604-7915A-A*** 60°GA1604-7915A-B*** 90°GA1606-7915A-O***
6 spf [20 spm]0°
5.50 139.70 2.00 50.80 4.25 lb/ft (w/sub)
3.62 lb/ft (w/sub)GA1606-7915A-A*** 60°
Page 106 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Product Name Part Number Explosive(g), load
Tubing/Drill Pipe Wall Thickness (in)[cm] Entrance Hole (in)[cm] Penetration (in)[cm]
Tubing Puncher TG39CS2 2.7g, HMX0.190 [0.4826] 0.45 [1.1430]
<=0.100 [0.254]0.375 [0.9525] 0.31 [0.7874]
Tubing Puncher TG39CM2 3.4g, HMX0.375 [0.9525] 0.43 [1.0922 ]
<=0.100 [0.254]0.500 [1.2700] 0.24 [0.6096 ]
Tubing Puncher TG39CL2 3.4g, HMX0.500 [1.2700] 0.21 [0.5334 ]
<=0.100 [0.254]0.580 [1.4732] 0.18 [0.4572 ]
Tubing Puncher TG39CM2-78 3.4g, HMX0.625 [1.5875] 0.28 [0.7112 ]
<=0.100 [0.254]0.785 [1.9939 ] 0.17 [0.4318 ]
Tubing Puncher TG39CL2-88 3.4g, HMX0.750 [1.9050 ] 0.20 [0.5080 ]
<=0.100 [0.254]0.885 [2.2479] 0.17 [0.4318 ]
Contact GEODynamics Engineering for recommendations and phasing options.
CIRCULATING CHARGES
Conventional Long Guns1-9/16 in (40 mm), RTG, 4 and 6 SPF, DP
Razor® EXTREME DEEP PENETRATING
Product Name Part Number Perforating Condition Explosive
1503 Razor XDP EC1-15A0322 In Fluid or Dry 3.2g, HMX1503 Razor XDP EC1-15A0322 Fluid 3.2g, HMX1503 Razor XDP EC1-15A0322-L Dry 2.9g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 0° 2-7/8 [7.30] 0.19 [0.48] 13.09 [33.25] API RP 436 spf / 60° 2-7/8 [7.30] 0.19 [0.48] 13.09 [33.25] API RP 436 spf / 0° 2-7/8 [7.30] 0.19 [0.48] 12.80 [32.51] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 107 Revised: July 24, 2020 1:30 PM
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Conventional Long Guns1-9/16 in (40 mm), RTG, 4 and 6 SPF, DP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 1-9/16” and 2” TC-QC15-000Top Subs, 1-9/16”
Top Sub, TCPTop Sub, Wireline
GN-R16-0020GN-R16-0035
Tandem Sub, 1-9/16” GN-R16-0021O-Ring Materials and Size, Nitrile (standard option)
Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
OR-N569-215OR-V95G-215OR-B215-1308
TCP Transfer Kit (1-9/16” through 2-1/2”) GN-020-0100Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-156-020GN-THD-156-000GN-THD-156-020
Bull Plug, 1-9/16” GN-R16-0022
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 1.56 [39.7] / 0.172 [4.37]Upper/Lower Thread Connections 1-9/32” - 12 Stub ACME; Refer to Components and Accessories for ancillary equipment.
Page 108 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 109 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 4’ to 21’Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 40-grain ribbon; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 1.91 [48.51] @ 5.1g (In Fluid)
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [138]Maximum Tensile* (lbf)[kN] 88,100 [392] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA17506-7517A-A084. See Available Gun Lengths. 0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 19’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 20.75 [6.32] 18.75 [5.72] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]*** 6 SPF Total Number of Loadable Shots 120 108 084 060 036 018
Contact your local GEODynamics representative for metric part numbers and availability.
Conventional Long Guns1-3/4 in (44 mm), RTG, 6 SPF, DP
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA17506-7517A-O***
6 spf [20 spm]0°
5.50 139.70 2.00 50.80GA17506-7517A-A*** 60°
Approximate WeightsFully Loaded Blank Gun
4.6 lb/ft (with sub)3.6 lb/ft (with sub)
Page 110 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 1-9/16” and 2” TC-QC15-000Top Subs, 1-3/4”
Top Sub, TCPTop Sub, Wireline
GN-R175-0020GN-R175-0035
Tandem Sub, 1-3/4” GN-R175-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-215OR-V95G-215OR-B215-1308
Gun Connection^OR-N569-218OR-V95G-218OR-B217-1468
TCP Transfer Kit (1-9/16” through 2-1/2”) GN-020-0100Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-156-020GN-THD-175-000GN-THD-175-020
Bull Plug, 1-3/4” GN-R175-0022^ Old part numbers GN-R17- subs, required -217 size o-rings and back-ups.
Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
1705 Razor XDP EC1-17A0522 Fluid 5.1g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 0° 4-1/2 [11.43] 0.26 [0.66] 21.63 [54.94} API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 1.765 [44.83] / 0.1875 [4.76]Upper/Lower Thread Connections 1-7/16” - 12P Stub ACME; refer to Components and Accessories for ancillary equipment.
Conventional Long Guns1-3/4 in (44 mm), RTG, 6 SPF, DP
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 111 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 40-grain ribbon; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 2.29” [58.16] @ 6.5g, (Connex XLS (extra low swell)) In Fluid or Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [138]Maximum Tensile* (lbf)[kN] 153,100 [681] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns2 in (51 mm), RTG, 4-6 SPF, GH and DP
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA2006-7320A-A084. Refer to Available Gun Lengths.
0°
2”
12”
60° 180°120° 240° 300° 360°caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA2004-7320A-O***
4 spf [13 spm]
0°
6.00 152.40 3.00 76.20GA2004-7320A-A*** 60°GA2004-7320A-B*** 90°GA2004-7320A-J*** 180°GA2005-7320A-A*** 5 spf [16 spm] 60° 5.70 144.78 2.40 60.96GA2006-7320A-O***
6 spf [20 spm]0°
5.50 139.70 2.00 50.80GA2006-7320A-A*** 60°
Approximate WeightsFully Loaded (6 spf)Blank Gun
6.1 lb/ft (with sub)4.9 lb/ft (with sub)
CARRIER SPECIFICATIONS
Page 112 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns2 in (51 mm), RTG, 4-6 SPF, GH and DP
Basix™ GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
2007 Basix GH EC1-20A0742 In Fluid or Dry 6.8g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 0° 3-1/2 [8.89] 0.36 [0.91] 20.52 [52.12] API RP 43
Razor® DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2007 Razor XDP EC1-20A0722 Fluid 6.8g, HMX
2007 Razor XLS XDP EC1-20B0722 In Fluid or Dry 6.5g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 2-7/8 [7.30] 0.25 [0.64] 22.30 [56.64] API RP 19B
6 spf / 60° 2-7/8 [7.30] 0.25 [0.64] 22.30 [56.64] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
2007 Connex EC2-20A0722-RC Fluid 6.8g, HMX
2007 Connex XLS EC2-20B0722-RC In Fluid or Dry 6.5g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 2-7/8 [7.30] 0.26 [0.66] 0.22 [0.56] 9.37 [23.80]
6 spf / 60° 2-7/8 [7.30] 0.26 [0.66] 0.22 [0.56] 9.37 [23.80]^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 113 Revised: July 24, 2020 1:30 PM
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Conventional Long Guns2 in (51 mm), RTG, 4-6 SPF, GH and DP
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 2.03” [52] / 0.210 [5.33]Upper/Lower Thread Connections 1-11/16” - 8P Stub ACME; refer to Components and Accessories for ancillary equipment.
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 1-9/16” and 2” TC-QC15-000Top Subs, 2”
Top Sub, TCPTop Sub, Wireline
GN-R20-0020GN-R20-0035
Tandem Subs, 2”Tandem Sub, TCPSwitch Tandem Sub, Wireline
GN-R20-0021GN-R20-T100-A
O-Ring Materials and Size Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-215OR-V95G-215OR-B215-1308
Gun ConnectionOR-N569-221OR-V95G-221OR-B217-1715
TCP Transfer Kit (1-9/16” through 2-1/2”) GN-020-0100Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-156-020GN-THD-200-000GN-THD-200-020
Bull Plug, 2” GN-R20-0022Charge Clips
Det Cord ClipLow Profile Clip
MS-1000-004MS-1000-115
GN-r20-0020
GN-r20-0021
GN-r20-T100-A
GN-r20-0022
GN-r20-0035
Page 114 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 115 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 60-grain cord; DET-60H212Compatible Perforating Charges Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 2.56” [6.50] @ 11.0g (In Fluid); 2.62” [66.55] @ 10.5g (Dry)
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [138]Maximum Tensile* (lbf)[kN] 153,100 [681] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns2-3/8 in (60 mm), RTG, 5 and 6 SPF, XDP
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA2306-6823A-A084. Refer to Available Gun Lengths.0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA2305-6823A-A*** 5 spf [16 spm] 60° 7.20 182.88 2.40 60.96GA2306-6823A-A*** 6 spf [20 spm] 60° 7.00 177.80 2.00 50.80
Approximate WeightsFully LoadedBlank Gun
9.5 lb/ft (with sub)7.5 lb/ft (with sub)
CARRIER SPECIFICATIONS
Page 116 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-3/8 in (60 mm), RTG, 5 and 6 SPF, XDP
Connex® Product Name Part Number Perforating
Condition Explosive
2311 Connex EC2-23A1122-RCFluid 11.0g, HMXFluid 11.0g, HMX
2311 Connex XLS EC2-23A1122-RC-LS ‡ Fluid or Dry 10.5g, HMX
Shot Density and Phasing
(tested)
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 3-1/2 [8.89] 0.35 [0.89] 0.31 [0.79] 11.35 [28.83]5 spf / 60° 3-1/2 [8.89] 0.35 [0.89] 0.31 [0.79] 11.35 [28.83]
‡ 6 spf / 60° 3-1/2 [8.89] 0.35 [0.89] 0.31 [0.79] 11.35 [28.83]‡ In dry gas, maximum shot density is 5 spf and limited to low-swell (LS) charges only. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Basix™ and Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2311 Basix XDP EC2-23A1121-E Fluid 11.0g, RDX
2311 Razor XDP EC2-23A1122 Fluid11.0g, HMX11.0g, HMX
2311 Razor XDP LS EC2-23A1122-LS ‡ Fluid or Dry 11.0g, HMX
API PerformanceShot Density and Phasing (tested)
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 3-1/2 [8.89] 0.30 [0.76] 9.00 [22.86] API RP 19B Sec. 26 spf / 60° 3-1/2 [8.89] 0.31 [0.79] 30.11 [76.48] API RP 435 spf / 0° 3-1/2 [8.89] 0.31 [0.79] 30.11 [76.48] API RP 43
‡ 6 spf / 0° 3-1/2 [8.89] 0.31 [0.79] 30.11 [76.48] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Refrax™Product Name Part Number Perforating
Condition Explosive
2311 Refrax EC2-23A1171-R Fluid 11.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 3.5” P110 0.33-0.38 [0.84-0.95] 4.5” P110 0.33-0.35 [0.84-0.89]
2-3/8” - DRY GAS CONDITIONS
Part Number Explosive
EC2-23A1121-LS 11.0g, RDXEC2-23A1122-LS 11.0g, HMX
EC2-23A1121-RC-LS 10.5g, RDXEC2-23A1122-RC-LS 10.5g, HMX
EC2-23A1171-R 11.0g, RDX
For 2-3/8” perforating in dry gas: ● Maximum shot density is 5 spf. ● Low-swell (LS) charges only. ● Only the following 23A charges are rated for dry gas conditions.
2-3/8” - FLUID CONDITIONS
Part Number Explosive
EC2-23A1121 11.0g, RDXEC2-23A1122 11.0g, HMX
EC2-23A1121-RC 11.0g, RDXEC2-23A1122-RC 11.0g, HMX
Part Number Explosive
EC2-23A1121-LS 11.0g, RDXEC2-23A1122-LS 11.0g, HMX
EC2-23A1121-RC-LS 10.5g, RDXEC2-23A1122-RC-LS 10.5g, HMX
EC2-23A1171-R 11.0g, RDX
For 2-3/8” perforating in fluid: ● Maximum shot density is 6 spf. ● All of the following 23A charges are rated for perforating in fluid
conditions.
‡ In dry gas, maximum shot density is 5 spf and limited to low-swell (LS) charges only.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 117 Revised: July 24, 2020 1:30 PM
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Conventional Long Guns2-3/8 in (60 mm), RTG, 5 and 6 SPF, XDP
Components and Accessories Part Number(s)Top Subs, 2-3/8”
Top Sub, TCPTop Sub, Wireline
GN-R23-0020GN-R23-0035
Top Sub Lift Sub Assembly, 1-9/16” and 2” TC-QC15-000Tandem Subs, 2-3/8”
Tandem Sub, TCPSwitch Tandem Sub, Wireline, 5.00” make-up length (MUL)Switch Tandem Sub, Wireline, 7.00” MUL
GN-R23-0021GN-R23-T100-ARN-R23-T104-A
TCP Transfer Kit (1-9/16” through 2-1/2”) GN-020-0100O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-215OR-V95G-215OR-B215-1308
Gun ConnectionOR-N569-225OR-V95G-225OR-B225-2160
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-156-020GN-THD-239-030GN-THD-239-040
Bull Plugs2-3/8” Standard2-3/8” with Sucker Rod Box Connection
GN-R23-0022GN-R23S-0022
Setting Tool Adapter Sub GN-R23-ST50
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 2.39” [60.71] / 0.230 [5.84]Upper/Lower Thread Connections 2-1/32”-8P Stub ACME 2G; refer to Components and Accessories for ancillary equipment.
Page 118 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 119 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 40-grain ribbon; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Basix™, Razor®, Connex®, and Refrax™Maximum Gun Swell (in)[mm] 2.66” [67.56] @ 11.5g (In Fluid)
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [137.90]Maximum Tensile* (lbf)[kN] 137,500 [611.63] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns2-1/2 in (64 mm), RTG, 4 and 6 SPF, XDP
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA2506-6825A-A084. Refer to Available Gun Lengths.0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA2504-6825A-A*** 4 spf [13 spm] 60° 7.50 190.50 3.00 76.20GA2506-6825A-A*** 6 spf [20 spm] 60° 7.00 177.80 2.00 50.80
Approximate WeightsFully LoadedBlank Gun
9.3 lb/ft (with sub)7.3 lb/ft (with sub)
CARRIER SPECIFICATIONS
Page 120 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-1/2 in (64 mm), RTG, 4 and 6 SPF, XDP
Razor® DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2511 Razor XDP EC2-25A1122 Fluid 11.5g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 3-1/2 [8.89] 0.32 [0.81] 31.10 [78.99] API RP 19B
Basix™ EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2511 Basix XDP EC2-25A1121-E Fluid 11.5g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 3-1/2 [8.89] 0.30 [0.76] 9.10 [23.11] API RP 19B Sec. 2
Connex®
Product Name Part Number Perforating Condition Explosive
2511 Connex EC2-25A1122-RC Fluid 11.5g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 3-1/2 [8.89] 0.34 [0.86] 0.31 [0.79] 11.50 [29.21]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Refrax™ Product Name Part Number Perforating
Condition Explosive
2511 Refrax EC2-25A1171-R Fluid 11.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 3.5” P110 0.38-0.42 [0.97-1.07] 5.5” P110 0.33-0.35 [0.84-0.89]GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 121 Revised: July 24, 2020 1:30 PM
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Conventional Long Guns2-1/2 in (64 mm), RTG, 4 and 6 SPF, XDP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 1-9/16” and 2” TC-QC15-000Top Subs, 2-1/2”
Top Sub, TCPTop Sub, Wireline
GN-R25-0020GN-R25-0035
Tandem Subs, 2-1/2”Tandem Sub, TCPSwitch Tandem Sub, Wireline, 5.50” make-up length (MUL)Switch Tandem Sub, Wireline, 7.00” MUL
GN-R25-0021GN-R25-T100-ARN-R25-T104-A
TCP Transfer Kit (1-9/16” through 2-1/2”) GN-020-0100O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-215OR-V95G-215OR-B215-1308
Gun ConnectionOR-N569-225OR-V95G-225OR-B225-2160
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-156-020GN-THD-250-030GN-THD-250-040
Bull Plug, 2-1/2” GN-R25-0022
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 2.50” [63.50] / 0.250 [6.35]Upper/Lower Thread Connections 2-1/8” - 8P ACME 2G; refer to Components and Accessories for ancillary equipment.
Page 122 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 123 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Razor®, Connex®, and Refrax™Maximum Gun Swell (in)[mm] 2.91 [73.91] @ 15.0g In Fluid; 3.02 [76.20] @ 15.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 25,000 [172.37]Maximum Tensile* (lbf)[kN] 176,600 [785.56] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns2-3/4 in (70 mm), 4 and 6 SPF
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA2706-6827A-A084. Refer to Available Gun Lengths.
0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA2704-6827TI-A***
4 spf [13 spm]
60° 7.50 190.50 3.00 76.20GA2704-6827A-B*** 90° 7.50 190.50 3.00 76.20GA2704-6827TI-B*** 90° 7.50 190.50 3.00 76.20GA2704-6827A-B***T 90° 6.00 152.40 3.00 76.20GA2704-6827TI-B***E 90° 7.50 190.50 3.00 76.20GA2704-6827A-G*** 120° 7.50 190.50 3.00 76.20GA2706-6827A-O***
6 spf [20 spm]
0° 7.00 177.80 2.00 50.80GA2706-6827A-A*** 60° 7.00 177.80 2.00 50.80
GA2706-6827A-A***T 60° 6.00 152.40 2.00 50.80GA2706-6827TI-A*** 60° 7.00 177.80 2.00 50.80
GA2706-6827TI-A***T 60° 6.00 152.40 2.00 50.80Approximate Weights
Fully Loaded (6 spf)Blank Gun
11.82 lb/ft (with sub)9.82 lb/ft (with sub)
CARRIER SPECIFICATIONS
Page 124 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-3/4 in (70 mm), 4 and 6 SPF
Basix™ and Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2715 Basix XDP EC2-27A1521 In Fluid or Dry 15.0g, RDX
2715 Razor XDP EC2-27A1522 In Fluid or Dry 15.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 43
6 spf /60° 4-1/2 [11.43] 0.39 [0.99] 37.45 [95.12] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
2715 Connex EC2-27A1522-RC In Fluid or Dry 15.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 4-1/2 [11.43] 0.39 [0.99] 0.34 [0.86] 12.18 [30.94]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Refrax™Product Name Part Number Perforating
Condition Explosive
2711 Refrax EC2-27A1171-R Fluid 11.0g, RDX
2715 Refrax EC2-27A1571-R Fluid 15.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 4.0” P110 0.29-0.30 [0.74-0.76] 5.5” P110 0.37-0.41 [0.94-1.04]
6 spf / 60° 4.0” P110 0.34-0.36 [0.86-0.91] 5.5” P110 0.34-0.42 [0.86-1.07]GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 30 EC2-27A1171 Fluid 11.0g, RDX
FracIQ 35 EC2-27A1271 Fluid 12.0g, RDX
FracIQ 40 EC2-27A1571 Fluid 15.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” P110 0.30 [0.76] 2.7 %
5.0 [12.70]6 spf / 60° 4.5” P110 0.35 [0.89] 5.9 %
6 spf / 60° 4.5” P110 0.40 [1.02] 6.3 %
FracIQ®
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 125 Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-3/4 in (70 mm), 4 and 6 SPF
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 2.75” [69.85] / 0.313 [7.95]Upper/Lower Thread Connections 2.375” - 6P ACME 2G; refer to Components and Accessories for ancillary equipment.
Components and Accessories Part Number(s)Top Subs, 2-3/4”
Top Sub, TCPTop Sub, Wireline
GN-R27-0020GN-R27-0035
Top Sub Lift Sub Assembly, 2-3/4” and 2-7/8” TC-QC27-000Tandem Subs, 2-3/4”
Tandem Sub, TCPSwitch Tandem Sub, Wireline, Ported, 3” make-up lengthAligning Switch Sub, LH Lock Ring
GN-R27-0021GN-R27-T100-AGN-R27-T125-A
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-225OR-V95G-225OR-B225-2160
Gun ConnectionOR-N569-227OR-V95G-227OR-B227-2405
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-QC27-020GN-THD-275-030GN-THD-275-040
Bull Plugs2-3/4” Standard2-3/4” with 2-3/8” EUE Pin2-3/4” Shoot-Thru2-3/4” Shoot-Thru Assembly (GN-R27-T150-A and GN-R27-ST27)
GN-R27-0022GN-R27-0023GN-R27-ST27GN-R27-ST30
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 126 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 127 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges FracIQ®, Basix™, Razor®, Connex®, and Refrax™Maximum Gun Swell (in)[mm] 3.07 [77.98] @ 18.0g In Fluid; 3.13 [79.50] @ 15.0g Dry
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns2-7/8 in (73 mm), 4 and 6 SPF
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA2806-6827A-A084. Refer to Available Gun Lengths. † GA28H = high-pressure system. A***T = True Shot interval
0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)
27A Charge Case
GA2804-6827A-A***4 spf [13 spm]
60°7.50 190.50 3.00 76.20GA2804-6827A-B*** 90°
GA2804-6827A-O*** 0°GA2806-6827A-A***
6 spf [20 spm]60°
7.00 177.80 2.00 50.80GA2806-6827A-K*** 100°† GA28H06-6827A-A*** 60°
28A Charge Case
GA2804-6528A-A*** 4 spf [13 spm] 60° 7.50 190.50 3.00 76.20GA2806-6528A-A***
6 spf [20 spm]60° 7.00 177.80 2.00 50.80GA2806-6528A-K*** 100°
GA2806-6528A-A***T 60° 6.00 152.40 2.00 50.80Approximate Weights
Fully Loaded (6 spf)Blank Gun
12.04 lb/ft (with sub)10.17 lb/ft (with sub)
CARRIER SPECIFICATIONS
ENVIRONMENTAL Standard High PressureMaximum Pressure (psi)[MPa] 20,000 [138] 25,000 [172]Maximum Tensile* (lbf)[kN] 213,700 [950 ] 213,700 [950] *Hardware Calculated Breaking Point
Page 128 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-7/8 in (73 mm), 4 and 6 SPF
Basix™ and Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
2715 Basix XDP EC2-27A1521In Fluid or Dry
15.0g, RDX2715 Razor XDP EC2-27A1522 15.0g, HMX2818 Basix XDP EC2-28A1821
Fluid18.0g RDX
2818 Razor XDP EC2-28A1822 18.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf /60° 4-1/2 [11.43]
0.39 [0.99] 37.45 [95.12] API RP 430.34 [0.86] 35.10 [89.15] API RP 19B0.43 [1.09] 40.05 [101.73] API RP 430.43 [1.09] 40.05 [101.73] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
2715 Connex EC2-27A1522-RC In Fluid or Dry 15.0g, HMX2715 Connex XEH EC2-27A1542-RC In Fluid or Dry 15.0g, HMX
2818 Connex EC2-28A1822-RC Fluid 18.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60° 4-1/2 [11.43]0.39 [0.99] 0.34 [0.86] 12.18 [30.94]0.44 [1.12] 0.35 [0.89] 11.60 [29.46]0.45 [1.14] 0.40 [1.02] 14.02 [35.61]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Refrax™Product Name Part Number Perforating
Condition Explosive
2711 Refrax EC2-27A1171-R Fluid 11.0g, RDX2715 Refrax EC2-27A1571-R Fluid 15.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° 4.0” P110 0.29-0.30 [0.74-0.76] 5.5” P110 0.37-0.41 [0.94-1.04]6 spf / 60° 4.0” P110 0.34-0.36 [0.86-0.91] 5.5” P110 0.34-0.42 [0.86-1.07]
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
FracIQ 30 EC2-27A1171Fluid
11.0g, RDXFracIQ 35 EC2-27A1271 12.0g, RDXFracIQ 40 EC2-27A1571 15.0g, RDX
FracIQ 35EC2-28A1171
Fluid
11.0g, RDXEC2-28A1172 11.0g, HMX
FracIQ 40EC2-28A1671 16.0g, RDXEC2-28A1672 16.0g, HMX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” P1100.30 [0.76] 2.7 %
5.0 [12.70]0.35 [0.89] 5.9 %0.40 [1.02] 6.3 %
6 spf / 60° 4.5” P110
0.36 [0.91] 3.3 %
5.0 [12.70]0.36 [0.91] 2.1 %0.40 [1.02] 2.7 %0.40 [1.02] 2.7 %
FracIQ®
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 129 Revised: July 24, 2020 1:30 PM
Conventional Long Guns2-7/8 in (73 mm), 4 and 6 SPF
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness** (in)[mm] 2.875” [73.03] / 0.313 [7.95]; **GA28H06 wall thickness: 0.363 [9.22]Upper/Lower Thread Connections 2.500” - 6P ACME 2G; refer to Components and Accessories for ancillary equipment.
Components and Accessories Part Number(s)Top Subs, 2-7/8”
Top Sub, TCPTop Sub, 2-7/8” with 3-1/8” QC Top Sub, Wireline
GN-R28-0020GN-R28-0020QC
GN-R28-0035Top Sub Lift Sub Assembly, 2-3/4” and 2-7/8” TC-QC27-000Tandem Subs, 2-7/8”
Tandem Sub, TCPSwitch Tandem Sub, Wireline, Ported (6.25” make-up length)
GN-R28-0021GN-R28-T150-A
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-225OR-V95G-225OR-B225-2160
Gun ConnectionOR-N569-228OR-V95G-228OR-B228-2560
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-QC27-020GN-THD-288-030GN-THD-288-040
Bull Plugs2-7/8” Standard2-7/8” with 2-3/8” EUE Pin2-7/8 Shoot-Thru
GN-R28-0022GN-R28-0023GN-R28-ST27
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 130 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 131 Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-1/8 in (79 mm), 4-6 SPF
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options, Available Gun Lengths range from 2’ to 21’Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain round; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges FracIQ®, Basix™, Connex®, Razor®, and Refrax™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 22.7g In Fluid; 3.60 [91.44] @ 19.0g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,500 [155.13]Maximum Tensile* (lbf)[kN] 245,200 [1090.70] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA3106-6033A-A084. Refer to Available Gun Lengths. A***T = True Shot interval; refer to Components and Accessories for ancillary equipment.
0°
2”
12”
60° 180°120° 240° 300° 360°caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop @ 0
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA3104-6033A-O***
4 spf [13 spm]
0°
7.50 190.50 3.00 76.20GA3104-6033A-A*** 60°GA3104-6033A-B*** 90°GA3104-6033A-G*** 120°GA3105-6033A-A***
5 spf [16 spm]60°
7.20 182.88 2.40 60.96GA3105-6033A-J*** 180°GA3106-6033A-O***
6 spf [20 spm]0°
7.00 177.80 2.00 50.80GA3106-6033A-A*** 60°
GA3106-6033A-A***T 60° 6.00 152.40 2.00 50.80Approximate Weights
Fully Loaded (6 spf)Blank Gun
14.25 lb/ft11.37 lb/ft
CARRIER SPECIFICATIONS
Page 132 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-1/8 in (79 mm), 4-6 SPF
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271
Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
FracIQ 30 EC2-33A1671 16.0g, RDXEC2-33A1672 16.0g, HMX
FracIQ 35 EC2-33A2071 20.0g, RDXEC2-33A2072 20.0g, HMX
FracIQ 40 EC2-33A2371 23.0g, RDXEC2-33A2372 23.0g, HMX
FracIQ 45 EC2-33A2071-45 20.0g, RDX
FracIQ 50 EC2-33A2371-50 23.0g, RDXEC2-33A2372-RX 23.0g, HMX
FracIQ 55 EC2-33A2371-55 23.0g, RDXFracIQ 30 LD EC2-33A1371-LD
Fluid13.0g, RDX
FracIQ 35 LD EC2-33A1671-LD 16.0g, RDXFracIQ 40 LD EC2-33A2071-LD 20.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°
4.5-5.5” OD
0.22 [0.56] 5.5%
5.0 [12.70]
0.26 [0.66] 4.1%0.32 [0.81] 4.6 %0.34 [0.86] 3.8 %0.37 [0.94] 3.4 %0.37 [0.94] 3.0 %0.42 [1.07] 3.5 %0.41 [1.04] 3.8 %
4.5”-5.5” OD 0.45 [1.14] 5.6 %4.5”-5.5” OD 0.50 [1.27] 1.5 %
5.5” OD 0.50 [1.27] 4.6 %4.5” OD 0.55 [1.40] 3.8 %
6 spf / 60° 4.5-5.5” OD0.31 [0.79] 3.1 %
5.0 [12.70]0.36 [0.91 ] 2.5 %0.40 [1.02] 3.3 %
FracIQ®
*3-1/8” FracIQ charge performance is compatible in 4.5” 11.6-15.1# and 5.5” 17-23# P-110 casing.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Basix™ GOOD HOLE, BIG HOLE, DEEP PENETRATING Product Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941 ‡ Fluid or Dry 19.0g, RDXEC2-33A2341 Fluid 22.7g, RDX
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDXEC2-33A2332 22.7g, HMX
3319 Basix XDP EC2-33A1921-E Fluid 19.0g, RDX3319 Basix XDP EC2-33A1921 ‡ Fluid or Dry 19.0g, RDX3319 Basix DP EC2-33A1951 ‡ Fluid or Dry 19.0g, RDX
3323 Basix XDP EC2-33A2321 Fluid 22.7g, RDXEC2-33A2321-E 22.7g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]
0.60 [1.52] 28.55 [72.52] API RP 43* * ** * ** * *
0.43 [1.09] 35.80 [90.93] API RP430.51 [1.30] 42.07 [106.86] API RP 43
* 29.20 [74.17] QC0.54 [1.37] * *0.42 [1.07] 46.01 [116.87] API RP 43
‡ Maximum shot density is 5 spf in dry gas.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 133 Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-1/8 in (79 mm), 4-6 SPF
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex XEH EC2-33A1941-RC ‡ Fluid or Dry 19.0g, RDXEC2-33A1942-RC 19.0g, HMX
3319 Connex RX EC2-33A1991-RX ‡ Fluid or Dry 19.0g, RDXEC2-33A1992-RX 19.0g, HMX
3323 Connex EC2-33A2321-RC Fluid 22.7g, RDXEC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2341-RC Fluid 22.7g, RDXEC2-33A2342-RC 22.7g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
4.5 [11.43] * * *0.52 [1.32] 0.42 [1.07] 14.37 [36.50]
4.5 [11.43] * * *0.40 [1.02] 0.32 [0.81] 11.60 [29.46]
4.5 [11.43] * * *0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
4.5 [11.43] * * *0.50 [1.27] 0.43 [1.09] 15.89 [40.36]
‡ Maximum shot density is 5 spf in dry gas. ^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. * Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
Basix Frac 25 EC2-33A1271-BF
Fluid
12.0g, RDXBasix Frac 30 EC2-33A1471-BF 14.0g, RDXBasix Frac 35 EC2-33A1871-BF 18.0g, RDXBasix Frac 40 EC2-33A2371-BF 23.0g, RDXBasix Frac 45 EC2-33A2371-BF45 23.0g, RDXBasix Frac 50 EC2-33A2371-BF50 23.0g, RDX
Shot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60° 4.5” - 5.5” OD P-110
0.26 [0.66] 2.4 %
4.0 [10.16]
0.31 [0.79] 4.0 %0.36 [0.91] 3.4 %0.40 [1.02] 6.6 %0.45 [1.14] 5.9%0.50 [1.27] 4.8 %
Basix™ Frac CONSTANT ENTRY HOLE AND PENETRATION
Page 134 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-1/8 in (79 mm), 4-6 SPF
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab retentionType of Tandem Connection Switch tandem subNominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006*** 6 SPF True Shot, Total Loadable Shots 121 085 061 037 019 013 007
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Refrax™Product Name Part Number Perforating
Condition Explosive
3314 Refrax EC2-33A1471-D
Fluid
14.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3320 Refrax EC2-33A2071-D 20.0g, RDX3316 Refrax EC2-33A1671-D 16.0g, RDX3323 Refrax EC2-33A2371-D 23.0g, RDX
API Performance in Dual CasingShot Density and Phasing Inner Casing Inner Casing EH
(in)[cm] Outer Casing Outer Casing EH (in)[cm]
6 spf / 60° Expanded 4.0” P110
0.33-0.33 [0.84-0.84]5.5” P110
0.30-0.30 [0.76-0.76]0.37-0.38 [0.94-0.95] 0.35-0.35 [0.89-0.89]0.41-0.42 [1.04-1.07] 0.40-0.40 [1.02-1.02]
6 spf / 60° 4.5” P110 0.30-0.32 [0.76-0.81] 7.0” P110 0.39-0.41 [0.99-1.04]0.41-0.42 [1.04-1.07] 0.35-0.35 [0.89-0.89]
Razor® EXTREME DEEP PENETRATINGShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4.5 [11.43]0.49 [1.24] 41.10 [104.39] API RP 43
0.42 [1.07] 39.02 [99.11] API RP 43
Product Name Part Number Perforating Condition Explosive
3319 Razor XDP EC2-33A1922 ‡ Fluid or Dry 19.0g, HMX
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMXEC2-33A2322-E‡ Maximum shot density is 5 spf in dry gas.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 135 Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
Top Subs, 3-1/8”, PortedTop Sub Assembly, Ported, SQC Connection (recommended)Top Sub Assembly, Ported (connects to industry-standard quick change)
GN-R31-CQC20-AGN-R31-T080-A
Top Sub, 3-1/8”, Conventional and TCPWireline Insert & O-Ring Spring Contact Assembly
GN-R31-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 3-1/8”, Conventional and TCP GN-R31-0021Switch Tandem Subs, 3-1/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R31-T150-AGN-R31-T101-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R31-T150L-AGN-R31-T150R-AGN-R31-T109R-A
Locking Rings, 3-1/8” Tandem SubsLeft-Hand Thread, HDRight-Hand Thread, HD
GN-R31-L001-319GN-R31-R001-319
O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-1/8” Standard 3-1/8” with 2-3/8” EUE Pin3-1/8” with 2-7/8” EUE Pin
GN-R31-0022GN-R31-0023GN-R31-0024
Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-AThread Protectors
Carrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
toP Sub, SQc connection
GN-r31-CQC20-A
Plug/Shoot aDaPter
GN-r31-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring GN-r31-T150l-A
bull Plug, StanDarD
GN-r31-0022
Switch Sub aSSembly GN-r31-T150-A
Conventional Long Guns3-1/8 in (79 mm), 4-6 SPF
Page 136 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 137 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options 12 SPF (150° - 30°); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain round; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Razor® and ISOLOC™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 12.00g In Fluid
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,500 [155]Maximum Tensile* (lbf)[kN] 245,200 [1090] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns3-1/8 in (79 mm), 12 SPF, SBH
*** Total number of shots (e.g., 15’ 12 SPF, 150° gun is GA3112-6031B-J169. Refer to Available Gun Lengths.
30°
150°
Carrier AssemblyPart Number
Shot Density & Phasing Gun End to Center of First Scallop Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA3112-6031B-J*** 12 spf [52 spm] 150°-30° 6.00 152.40 1.00 25.40 16.0 lb/ft 11.37 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 025 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 138 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 3.15 [80.01] / 0.315 [8.00] or 3.125 [79.38] / 0.3125 [7.94]Upper/Lower Thread Connections 2.750” 6P ACME-2G; refer to Components and Accessories for ancillary equipment.
* Performance test results pending. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Conventional Long Guns3-1/8 in (79 mm), 12 SPF, SBH
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
3112 Razor SBH EC2-31B1231 Fluid 12.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf/150°-30° 5” [12.70] 0.70 [1.78] 5.60 [14.22] API RP 43
ISOLOC™ BIG HOLEProduct Name Part Number Perforating
Condition Explosive
3107 ISOLOC EC2-31B0731 Fluid 7.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf/150°-30° 5” [12.70] * * *
Also available with zinc cases; P/N EC2-31C1231 (RDX) and EC2-31C1232 (HMX). Blank charge cases, 31B, steel: P/N EP-1112-100; 31C, zinc: P/N EP-1208-100-D.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 139 Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-1/8 in (79 mm), 12 SPF, SBH
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub Lift Sub Assembly, 3-1/8” TC-LT31-000Top Subs, 3-1/8”, Ported
Top Sub Assembly, Ported, SQC Connection (recommended)Top Sub Assembly, Ported (connects to industry-standard quick change)
GN-R31-CQC20-AGN-R31-T080-A
Top Sub, 3-1/8”, Conventional and TCPWireline Insert & O-Ring Spring Contact Assembly
GN-R31-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 3-1/8”, Conventional and TCP GN-R31-0021Switch Tandem Subs, 3-1/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R31-T150-AGN-R31-T101-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R31-T150L-AGN-R31-T150R-AGN-R31-T109R-A
Locking Rings, 3-1/8” Tandem SubsLeft-Hand Thread, HDRight-Hand Thread, HD
GN-R31-L001-319GN-R31-R001-319
O-Ring Materials and Size, Nitrile (standard option) OR-N569-230Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Plug/Shoot Adapter, 3-1/8” GN-R31-ST30-ABull Plugs
3-1/8” Standard 3-1/8” with 2-3/8” EUE Pin3-1/8” with 2-7/8” EUE Pin
GN-R31-0022GN-R31-0023GN-R31-0024
Thread ProtectorsCarrier (Gun) Protector, 3-1/8”Carrier (Gun) Plastic Plug Protector, 3-1/8”Top Sub (Top Pin) Protector, 3-1/8”Tandem Sub & Bull Plug Thread Protector, 3-1/8”Bottom Sub Thread Protector (lower connection), 3-1/8”
GN-THD-312-030GN-THD-312-300GN-THD-312-020GN-THD-312-040GN-THD-312-040
Plug/Shoot aDaPter
GN-r31-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring GN-r31-T150l-A
bull Plug, StanDarD
GN-r31-0022
Switch Sub aSSembly GN-r31-T150-A
toP Sub, SQc connection
GN-r31-CQC20-A
Page 140 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 141 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain round; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges FracIQ®, Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 3.56 [90.42] @ 25.00g In Fluid; 3.63 [92.20] @ 22.7g Dry
ENVIRONMENTALMaximum Pressure (psi)[MPa] 22,700 [156.51]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns3-3/8 in (86 mm), 4-6 SPF
*** Total number of shots (e.g., 15’ 6 SPF, 60° gun is GA3306-6033A-A084. Refer to Available Gun Lengths.L*** = Low Side phasing (2 rows, 60° apart); A***T = True Shot interval
0°
2”
12”
60° 180°120° 240° 300° 360°caSing Shot Pattern anD PhaSing at 6 SPf 60°
Carrier AssemblyPart Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)GA3304-6033A-O***
4 spf [13 spm]
0°
7.50 190.50 3.00 76.20GA3304-6033A-A*** 60°GA3304-6033A-B*** 90°GA3304-6033A-G*** 120°GA3305-6033A-J*** 5 spf [16 spm] 180° 7.20 182.88 2.40 60.96GA3306-6033A-O***
6 spf [20 spm]
0°7.00 177.80 2.00 50.80GA3306-6033A-A*** 60°
GA3306-6033A-L*** +30°/-30°GA3306-6033A-A***T 60° 6.00 152.40 2.00 50.80
Approximate Weights Fully Loaded (6 spf)Blank Gun
15.25 lb/ft (with sub)13.50 lb/ft (with sub)
CARRIER SPECIFICATIONS
Page 142 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-3/8 in (86 mm), 4-6 SPF
Basix™ BIG HOLE, GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDX3323 Basix GH EC2-33A2341 In Fluid or Dry 22.7g, RDX3325 Basix GH EC2-33B2541 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 7.0 [17.78] 0.74 [1.88] 7.13 [18.11] API RP 43
6 spf / 60° 4-1/2 [11.43]0.52 [1.32] 33.58 [85.29]
API RP 430.57 [1.45] 25.91 [65.81]
Basix™ DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Basix DP EC2-33A2351 In Fluid or Dry 22.7g, RDX3323 Basix XDP EC2-33A2321-E In Fluid or Dry 22.7g, RDX3325 Basix XDP EC2-33B2521-E Fluid 25.0g, RDX3325 Basix XDP EC2-33B2521 Fluid 25.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43]
0.47 [1.19] 32.10 [81.53] QC0.45 [1.14] 46.32 [117.65] API RP 430.45 [1.14] 50.08 [127.20] API RP 430.45 [1.14] 44.58 [113.23] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Product Name Part Number Perforating Condition Explosive
3323 Razor XDP EC2-33A2322 In Fluid or Dry 22.7g, HMX3325 Razor XDP EC2-33B2522 Fluid 25.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 4-1/2 [11.43] 0.45 [1.14] 46.32 [117.65] API RP 436 spf / 60° 4-1/2 [11.43] 0.53 [1.35] 47.30 [120.14] API RP 19B
Razor® DEEP PENETRATING
Product Name Part Number Perforating Condition Explosive
FracIQ 20 EC2-33A1271Fluid
12.0g, RDXFracIQ 25 EC2-33A1371 13.0g, RDX
API PerformanceShot Density and Phasing
API 19B Targeted Pipe*
Entrance Hole (in)[cm]
EHD Variation Decentralized
Rock Penetration API 19B-Sec. 2 (in)[cm]
6 spf / 60°4.5”-5.5” OD 0.22 [0.56] 5.5%
5.0 [12.70]6.0” OD P110 0.26 [0.66] 2.3%
FracIQ®
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 143 Revised: July 24, 2020 1:30 PM
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006*** 6 SPF True Shot, Total Loadable Shots 121 085 061 037 019 013 007
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Conventional Long Guns3-3/8 in (86 mm), 4-6 SPF
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 3.375 [85.73] / 0.375 [9.53]Upper/Lower Thread Connections 2.8125” - 6P ACME-2G; refer to Components and Accessories for ancillary equipment.
Connex®
Product Name Part Number Perforating Condition Explosive
3319 Connex RX EC2-33A1992-RXIn Fluid or Dry
19.0g, HMX3323 Connex EC2-33A2322-RC 22.7g, HMX
3323 Connex XEH EC2-33A2342-RC 22.7g, HMX3325 Connex EC2-33B2522-RC
Fluid25.0g, HMX
3325 Connex XEH EC2-33B2542-RC 25.0g, HMX
API Performance
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]
6 spf / 60°
5-1/2 [13.97] 0.42 [1.07] 0.32 [0.81] 11.60 [29.46]4-1/2 [11.43] 0.47 [1.19] 0.46 [1.17] 15.31 [38.89]4-1/2 [11.43] 0.50 [1.27] 0.43 [1.09] 15.89 [40.36]4-1/2 [11.43] 0.53 [1.35] 0.48 [1.22] 15.45 [39.24]4-1/2 [11.43] 0.54 [1.37] 0.40 [1.02] 14.92 [37.90]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Page 144 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-3/8 in (86 mm), 4-6 SPF
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub, 3-3/8”, Conventional and TCP
Wireline Insert & O-Ring Spring Contact AssemblyTop Sub, WirelineTop Sub, Ported, SQC Connection
GN-R33-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020GN-R33-0035
GN-R33-CQC20-ATop Sub Lift Sub Assembly, 3-3/8” TC-LT33-000Tandem Sub, 3-3/8”, Conventional and TCP GN-R33-0021Switch Tandem Subs, 3-3/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R33-T150-AGN-R33-T100-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R33-T150L-AGN-R33-T150R-AGN-R33-T109R-A
Locking Rings, 3-3/8” Tandem SubsLeft-Hand ThreadRight-Hand Thread
GN-R33-L001GN-R33-R001
O-Ring Materials and Size Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-231OR-V95G-231OR-B231-2870
Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-3/8” Standard 3-3/8” with 2-3/8” EUE Pin3-3/8” with 2-7/8” EUE Pin
GN-R33-0022GN-R33-0023GN-R33-0024
Plug/Shoot Adapter, 3-3/8” GN-R33-ST30-ACharge Clips
Det Cord ClipLow Profile Clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors, 3-3/8”
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-338-030GN-THD-338-040
toP Sub, SQc connection
GN-r33-CQC20-A
Plug/Shoot aDaPter
GN-r33-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring
GN-r33-T150l-A
bull Plug, StanDarD
GN-r33-0022
toP Sub
GN-r33-0020
toP Sub, wireline
GN-r33-0035
Switch tanDem Sub GN-r33-T150
tanDem Sub
GN-r33-0021
Switch tanDem Sub aSSy
GN-r33-T100-A
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 145 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONSShot Density and Phasing Options 12 SPF (150° - 30°); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain round; refer to Components and Accessories for ancillary equipmentCompatible Perforating Charges Razor® and ISOLOC™Maximum Gun Swell (in)[mm] 3.46 [87.88] @ 12.00g In Fluid
ENVIRONMENTALMaximum Pressure (psi)[MPa] 20,000 [138]Maximum Tensile* (lbf)[kN] 331,900 [1476.36] *Hardware Calculated Breaking Point
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
Conventional Long Guns3-3/8 in (86 mm), 12 SPF, SBH
*** Total number of shots (e.g., 15’ 12 SPF, 150° gun is GA3312-5381B-J169. Refer to Available Gun Lengths.
30°
150°
Carrier AssemblyPart Number
Shot Density & Phasing Gun End to Center of First Scallop Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA3312-5381B-J*** 12 spf [52 spm] 150°-30° 6.00 152.40 1.00 25.40 16.0 lb/ft 13.50 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 025 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 146 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 3.375 [85.73] / 0.375 [9.53]Upper/Lower Thread Connections 2.8125” - 6P ACME-2G; refer to Components and Accessories for ancillary equipment.
* Performance test results pending. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Also available with zinc cases; P/N EC2-31C1231 (RDX) and EC2-31C1232 (HMX). Blank charge cases, 31B, steel: P/N EP-1112-100; 31C, zinc: P/N EP-1208-100-D.
Conventional Long Guns3-3/8 in (86 mm), 12 SPF, SBH
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
3112 Razor SBH EC2-31B1231 Fluid 12.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf/150°-30° 5-1/2 [13.97] 0.71 [1.80] 5.88 [14.94] API RP 43
ISOLOC™ BIG HOLEProduct Name Part Number Perforating
Condition Explosive
3107 ISOLOC EC2-31B0731 Fluid 7.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf/150°-30° 5-1/2 [13.97] * * *
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 147 Revised: July 24, 2020 1:30 PM
Conventional Long Guns3-3/8 in (86 mm), 12 SPF, SBH
Components and Accessories Part Number(s)Short Quick Change (SQC) Assembly (one per string, CCL to top sub)
Quick Rebuild Kit (contacts, teflon tubing, screw, spring, insulating retainer)Complete Rebuild Kit with O-Rings (all required parts)
GN-QC31-0001RKQ-GN-QC31-0001RKC-GN-QC31-0001
TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub, 3-3/8”, Conventional and TCP
Wireline Insert & O-Ring Spring Contact AssemblyTop Sub, WirelineTop Sub, Ported, SQC Connection
GN-R33-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020GN-R33-0035
GN-R33-CQC20-ATop Sub Lift Sub Assembly, 3-3/8” TC-LT33-000Tandem Sub, 3-3/8”, Conventional and TCP GN-R33-0021Switch Tandem Subs, 3-3/8”, Ported
Switch Sub Assembly, 12” long, 6.24” make-up lengthSwitch Sub Assembly, 3.25” make-up length
GN-R33-T150-AGN-R33-T100-A
Aligning Switch Sub, LH Lock Ring, 6.24” make-up length (MUL)Aligning Switch Sub, RH Lock Ring, 6.24” MULAligning Short Switch Sub, RH*, *compatible with centralizer rings
GN-R33-T150L-AGN-R33-T150R-AGN-R33-T109R-A
Locking Rings, 3-3/8” Tandem SubsLeft-Hand ThreadRight-Hand Thread
GN-R33-L001GN-R33-R001
O-Ring Materials and Size Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-231OR-V95G-231OR-B231-2870
Port Plug and Port Plug O-Ring GN-R00-T001 / OR-N569-217Bull Plugs
3-3/8” Standard 3-3/8” with 2-3/8” EUE Pin3-3/8” with 2-7/8” EUE Pin
GN-R33-0022GN-R33-0023GN-R33-0024
Plug/Shoot Adapter, 3-3/8” GN-R33-ST30-ACharge Clips
Det Cord ClipLow Profile Clip
MS-1000-004MS-1000-115
Thread Protectors, 3-3/8”Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-338-030GN-THD-338-040
toP Sub, SQc connection
GN-r33-CQC20-A
Plug/Shoot aDaPter
GN-r33-ST30-A
Short Quick change aSSembly
GN-QC31-0001
aligning Switch Sub, lh lock ring
GN-r33-T150l-A
bull Plug, StanDarD
GN-r33-0022
toP Sub
GN-r33-0020
toP Sub, wireline
GN-r33-0035
Switch tanDem Sub GN-r33-T150
tanDem Sub
GN-r33-0021
Switch tanDem Sub aSSy
GN-r33-T100-A
Page 148 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 149 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4 in (102 mm) 4-6 SPF, XDP
APPLICATION SPECIFICATIONSShot Density and Phasing Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™, Connex®, and Razor®
Maximum Gun Swell (in)[mm] 4.16 [105.66] @ 39.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 19,700 [135] (4 SPF carrier)Maximum Tensile* (lbf)[kN] 434,400 [1932] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONSCarrier Assembly
Part Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)
40A Charge Case
GA4004-4540A-A***
4 spf [13 spm]
60°
7.50 190.50 3.00 76.20GA4004-4540A-B*** 90°
GA4004-4540A-G*** 120°
GA4004-4540A-OL*** 0°/+5/-5
33A/ 33B
Charge Cases
GA4005-6033A-A***5 spf [16 spm]
60°7.20 182.88 2.40 60.96
GA4005-6033A-J*** 180°
GA4006-6033A-A*** 6 spf [20 spm] 60° 7.00 177.80 2.00 50.80Approximate Weights
Fully Loaded (4 spf)Blank Gun
22.05 lb/ft (with sub)17.69 lb/ft (with sub)
0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Page 150 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4 in (102 mm) 4-6 SPF, XDP
Basix™ EXTREME DEEP PENETRATING (40A)Product Name Part Number Perforating
Condition Explosive
4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 60° 5-1/2” [13.97] 0.39 [0.99] 53.00 [134.62] API RP 43
Razor® EXTREME DEEP PENETRATING (40A)Product Name Part Number Perforating
Condition Explosive
4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
4 spf / 90° 5-1/2” [13.97] 0.39 [0.99] 53.00 [134.62] API RP 19B
Razor® EXTREME DEEP PENETRATING (33A)Product Name Part Number Perforating
Condition Explosive
3325 Razor XDP EC2-33B2522 In Fluid or Dry 25.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
6 spf / 60° 5-1/2” [13.97] 0.47 [1.19] 46.11 [117.12] API RP 43
Connex® (40A)Product Name Part Number Perforating
Condition Explosive
4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]4 spf / 60° 5-1/2” [13.97] 0.49 [1.24] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]6 spf / 60° 5-1/2” [13.97] 0.46 [1.17] 0.46 [1.17] 15.31 [38.89]
Connex® (33A)Product Name Part Number Perforating
Condition Explosive
3323 Connex EC2-33A2322-RC Fluid 22.7g, HMXRefer to Basix, Connex, and Razor shaped charges performance details for additional 33A and 33B charges compatible with 6033A load tubes in this carrier.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 151 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4 in (102 mm) 4-6 SPF, XDP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4” TC-LT40-000TCP Transfer Kit (2-3/4” through 4”) GN-000-0025Top Sub, 4”
Top Sub Wireline InsertSpring Contact Assembly
GN-R40-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4” GN-R40-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-236OR-V95G-236OR-B236-3497
Bull Plug, 4” StandardBull plug, 4” with 2-3/8” EUE PinBull plug, 4” with 2-7/8” EUE Pin
GN-R40-0022GN-R40-0023GN-R40-0024
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.00 [101.60] / 0.375 [9.53]Upper/Lower Thread Connections 3-7/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 152 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 153 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 4-6 SPF, BH, GH, and XDP
APPLICATION SPECIFICATIONSShot Density and Phasing Multiple Shot Density & Phasing options; Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 4.67 [118.62] @ 39.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 17,700 [122]Maximum Tensile* (lbf)[kN] 517,800 [2303] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONSCarrier Assembly
Part Number
Shot Density & Phasing Options
Gun End to Center of First Scallop
Distance Shot to Shot
(spf) [spm] Phasing (in) (mm) (in) (mm)
40A Charge Case
GA4504-4540A-A***4 spf [13 spm]
60°7.50 190.50 3.00 76.20
GA4504-4540A-B*** 90°GA4505-4540A-A***
5 spf [16 spm]
60°
7.20 182.88 2.40 60.96GA4505-4540A-O*** 0°GA4505-4540A-LB*** 0°/+10°GA4505-4540A-OL*** 0°/+5/-5
33A/ 33B
Charge Cases
GA4504-6033A-B*** 4 spf [13 spm] 90° 7.50 190.50 3.00 76.20GA4505-6033A-A*** 5 spf [16 spm] 60° 7.20 182.88 2.40 60.96GA4506-6033A-A*** 6 spf [20 spm] 60° 7.00 177.80 2.00 50.80
Approximate WeightsFully Loaded (5 spf)Blank Gun
25.28 lb/ft (with sub)19.78 lb/ft (with sub)
0°
2”
12”
60° 180°120° 240° 300° 360°
caSing Shot Pattern anD PhaSing at 6 SPf 60°
Page 154 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 4-6 SPF, BH, GH, and XDP
Basix™ DEEP PENETRATING AND BIG HOLE (40A)Product Name Part Number Perforating
Condition Explosive
4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX4039 Basix BH EC2-40A3931 Fluid 39.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7” [17.78] 0.44 [1.12] 62.90 [159.77] API RP 435 spf / 60° 7” [17.78] 0.86 [2.18] 6.13 [15.57] API RP 43
Razor® EXTREME DEEP PENETRATING (40A)Product Name Part Number Perforating
Condition Explosive
4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7” [17.78] 0.44 [1.12] 62.90 [159.77] API RP 19B
Connex® (40A)
Product Name Part Number Perforating Condition Explosive
4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]5 spf / 60° 7” [17.78] 0.46 [1.17] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.
Connex® (33A)Product Name Part Number Perforating
Condition Explosive
3323 Connex EC2-33A2321-RC Fluid 23.0g, RDX3323 Connex XEH EC2-33A2341-RC Fluid 23.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration (Stressed Berea)(in)[cm] (test)
- 7” [17.78] 0.34 [0.86] 14.75 [37.47] API RP 19B-Sec. 2- 7” [17.78] 0.34 [0.86] 14.72 [37.39] API RP 19B-Sec. 2
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.Refer to Basix, Connex, and Razor shaped charges performance details for additional 33A and 33B charges compatible with 6033A load tubes in this carrier.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 155 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 4-6 SPF, BH, GH, and XDP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” StandardBull plug, 4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord,Ø.24” x 0.88” DT-0875-242
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.50 [114.30] / 0.375 [9.53]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84] 1.75 [0.53]*** 4 SPF Total Number of Loadable Shots 080 056 040 024 012 008 004*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 010 005*** 6 SPF Total Number of Loadable Shots 120 084 060 036 018 012 006
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 156 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 157 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 12 SPF, BH, GH, and XDP
APPLICATION SPECIFICATIONSShot Density and Phasing 12 SPF (135-45); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™ and Razor®
Maximum Gun Swell (in)[mm] 4.69 [119.13] @ 22.7g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 17,200 [118]Maximum Tensile* (lbf)[kN] 517,800 [2303] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center of
First ScallopDistance
Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) FullyLoaded Blank Gun
GA4512-5033A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 24.88 lb/ft (w/sub)
19.09 lb/ft (w/sub)
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75[2.06]
3.75[1.14]
2.75[0.84]
1.75[0.53]
*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 025 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
*** Total number of shots, e.g., 21’ 12SPF, 135-45 phased gun is GA4512-5033A-C241.
Page 158 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 12 SPF, BH, GH, and XDP
Basix™ GOOD HOLE and BIG HOLEProduct Name Part Number Perforating
Condition Explosive
3323 Basix BH EC2-33A2331 Fluid 22.7g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 135°-45° 7” [17.78] 0.81 [2.06] 5.28 [13.41] API RP 43
Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 135°-45° 7” [17.78] 0.38 [0.97] 34.90 [88.65] API RP 19BFor this application, 33A charges must have the grooved charge case, EP-1000-100-D. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” StandardBull plug, 4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.50 [114.30] / 0.375 [9.53]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°
caSing Shot Pattern anD PhaSing at 12 SPf 135°
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 159 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 12 SPF, SBH
APPLICATION SPECIFICATIONSShot Density and Phasing 12 SPF (135-45); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™ and Razor®
Maximum Gun Swell (in)[mm] 4.81 [122.17] @ 26.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 17,200 [118]Maximum Tensile* (lbf)[kN] 517,800 [2303] *Hardware Calculated Breaking Point
CARRIER SPECIFICATIONS
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center of
First ScallopDistance
Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) FullyLoaded Blank Gun
GA4512-4046A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 24.88 lb/ft (w/sub)
19.09 lb/ft (w/sub)
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75[2.06]
3.75[1.14]
2.75[0.84]
1.75[0.53]
*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 025 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
*** Total number of shots, e.g., 21’ 12SPF, 135-45 phased gun is GA4512-4046A-C241.
Page 160 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 12 SPF, SBH
Basix™ and Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4526 Basix SBH EC2-45B2631 Fluid 26.0g, RDX4626 Razor SBH TL LD EC2-46A2631 26.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
† 16 spf / 140°-20° 7” [17.78] 0.94 [2.39] 6.27 [15.93] API RP 437” [17.78] 0.90 [2.29] 5.50 [13.97] API RP 19B
† API performance represents testing results with 4-5/8” 16 spf, SBH carrier; maximum shot density in 4-1/2” carrier is 12 spf.Charge cases: 45B, 46A, 46B with 26g load are compatible with 4-1/2” carrier and 4046A load tube. Blank charge case P/N: EP-1085-100-D (4-1/2” BH LD, zinc). GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” StandardBull plug, 4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.50 [114.30] / 0.375 [9.53]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°
caSing Shot Pattern anD PhaSing at 12 SPf 135°
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 161 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-1/2 in (114 mm) 17 SPM
APPLICATION SPECIFICATIONSShot Density and Phasing 17 SPM (60°); Available Gun Lengths range from 1 to 7 meters Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 4.67 [118.62] @ 39.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 17,700 [122]Maximum Tensile* (lbf)[kN] 517,800 [2303] *Hardware Calculated Breaking Point
Carrier Assembly Part Number # ShotsShot Density &
PhasingGun End to Center
of First ScallopDistance
Shot to ShotGun
LengthsApproximate
Weightsspm Phasing (mm) (in) (mm) (in) (m) (kg) (lbs)
GM4517-4540A-A017 17
17 spm 60°
190 7.48
60.6061 2.38606
1.35 39.6 87GM4517-4540A-A034 34 175 6.89 2.35 67.1 148GM4517-4540A-A050 50 190 7.48 3.35 94.8 209GM4517-4540A-A067 67 175 6.89 4.35 122.4 270GM4517-4540A-A083 83 190 7.48 5.35 150.0 331GM4517-4540A-A100 100 175 6.89 6.35 177.6 392GM4517-4540A-A116 116 190 7.48 7.35 205.3 453
CARRIER SPECIFICATIONS
Page 162 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Components and Accessories (cont.) Part NumbersBull Plug, 4-1/2” Standard
Bull plug, 4-1/2” with 2-7/8” EUE PinGN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord,Ø.24” x 0.88” DT-0875-242
Thread ProtectorsTop Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
Conventional Long Guns4-1/2 in (114 mm) 17 SPM
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.50 [114.30] / 0.375 [9.53]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Basix™ DEEP PENETRATING and BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX4039 Basix BH EC2-40A3931 Fluid 39.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7” [17.78] 0.44 [1.12] 62.90 [159.77] API RP 435 spf / 60° 7” [17.78] 0.86 [2.18] 6.13 [15.57] API RP 43
Razor® EXTREME DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7” [17.78] 0.44 [1.12] 62.90 [159.77] API RP 19B
Connex®
Product Name Part Number Perforating Condition Explosive
4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]5 spf / 60° 7” [17.78] 0.46 [1.17] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 163 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 5 SPF, BH and XDP
APPLICATION SPECIFICATIONSShot Density and Phasing 5 SPF (60°); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™, Razor® and Connex®
Maximum Gun Swell (in)[mm] 4.67 [118.62] @ 39.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 18,900 [130]Maximum Tensile* (lbf)[kN] 454,600 [2022] *Hardware Calculated Breaking Point
*** Total number of shots, e.g., 21’ 5 SPF, 60° phased gun is GA4605-4540A-A100. Refer to Available Gun Lengths.
Carrier AssemblyPart Number
Shot Density & Phasing Gun End to Center of First Scallop Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA4605-4540A-A*** 5 spf [16 spm] 60° 7.20 183 2.40 60.96 32.5 lb/ft 27.9 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 1.75 [0.53]*** 5 SPF Total Number of Loadable Shots 100 070 050 030 015 005
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 164 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 5 SPF, BH and XDP
Razor® EXTREME DEEP PERFORATINGProduct Name Part Number Perforating
Condition Explosive
4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7.0 [17.78] 0.44 [1.12] 62.90 [159.77] API RP 19B
Basix™ EXTREME DEEP PERFORATINGProduct Name Part Number Perforating
Condition Explosive
4039 Basix XDP EC2-40A3921 Fluid 39.0g, RDX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7.0 [17.78] 0.44 [1.12] 62.90 [159.77] API RP 43
Basix™ BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4039 Basix BH EC2-40A3931 Fluid 39.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
5 spf / 60° 7.0 [17.78] 0.86 [2.18] 6.13 [15.57] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]5 spf / 60° 7.0 [17.78] 0.46 [1.17] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 165 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 5 SPF, BH and XDP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” Standard4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors, Top Sub (Top Pin)
Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.625 [117.48] / 0.4375 [11.11]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Page 166 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 167 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 12 SPF, XDP
APPLICATION SPECIFICATIONSShot Density and Phasing 12 SPF (135°-45°); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor® and Connex®
Maximum Gun Swell (in)[mm] 4.69 [119.13] @ 22.7g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 18,900 [130]Maximum Tensile* (lbf)[kN] 454,600 [2022] *Hardware Calculated Breaking Point
*** Total number of shots, e.g., 21’ 12 SPF, 135°-45° phased gun is GA4612-5033A-C241. Refer to Available Gun Lengths.
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center of
First ScallopDistance
Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA4612-5033A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 33.5 lb/ft 27.9 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 1.75 [0.53]*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 168 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 12 SPF, XDP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” Standard4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors, Top Sub (Top Pin)
Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°caSing Shot Pattern anD PhaSing at 12 SPf 135°
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.625 [117.48] / 0.4375 [11.11]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® EXTREME DEEP PERFORATINGProduct Name Part Number Perforating
Condition Explosive
3323 Razor XDP EC2-33A2322 Fluid 22.7g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 135°-45° 7” [17.78] 0.38 [0.97] 34.90 [88.65] API RP 19B
Connex®
Product Name Part Number Perforating Condition Explosive
3323 Connex EC2-33A2322-RC Fluid 22.7g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]12 spf / 135-45° 7.0 [17.78] 0.40 [1.02] 0.46 [1.17] 15.31 [38.89]
For this application, 33A charges must have the grooved charge case, EP-1000-100-D. ^API Heavy wall casing is equivalent to 0.500” 120KSI yield.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 169 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 12 SPF, SBH
APPLICATION SPECIFICATIONSShot Density and Phasing 12 SPF (135°-45°); Available Gun Lengths range from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 4.81 [122.17] @ 26.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
ENVIRONMENTALMaximum Pressure (psi)[MPa] 18,900 [130]Maximum Tensile* (lbf)[kN] 454,600 [2022] *Hardware Calculated Breaking Point
*** Total number of shots, e.g., 21’ 12 SPF, 135°-45° phased gun is GA4612-4054A-C241. Refer to Available Gun Lengths.
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center of
First ScallopDistance
Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA4612-4054A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 32 lb/ft 27.9 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 2’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 1.75 [0.53]*** 12 SPF Total Number of Loadable Shots 241 169 121 073 037 013
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 170 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 12 SPF, SBH
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” StandardBull plug, 4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°caSing Shot Pattern anD PhaSing at 12 SPf 135°
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; twist-lock retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.625 [117.48] / 0.4375 [11.11]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4626 Razor SBH EC2-46B2631 Fluid 26.0g, RDX
4626 Razor SBH TL LD EC2-46A2631Fluid 26.0g, RDXFluid 26.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
16 spf / 140°-20° 7” [17.78] 0.94 [2.39] 6.27 [15.93] API RP 4316 spf / 140°-20° 7” [17.78] 0.90 [2.29] 5.50 [13.97] API RP 19B16 spf / 140°-20° 7-3/4” [19.69] 0.96 [2.44] 5.40 [13.72] API RP 19B
Blank charge case P/N: EP-1085-100-D (4-1/2” BH LD, zinc). Charge case 46B is steel; charge case 46A is zinc. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 171 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 16 SPF, SBH, Standard and High Pressure
APPLICATION SPECIFICATIONSShot Density and Phasing 16 SPF (140°-20°); Available Gun Lengths range from 4’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 4.81 [122.17] @ 26.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots, e.g., 21’ 16 SPF, 140°-20° phased high-pressure gun is GA4616-4045A-D321-HP. Refer to Available Gun Lengths.
ENVIRONMENTALStandard High Pressure
Maximum Pressure (psi)[MPa] 18,900 [130] 20,000 [138] @ 235°FMaximum Tensile* (lbf)[kN] 454,600 [2022 ] 465,300 [2069] *Hardware Calculated Breaking Point
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center of
First ScallopDistance
Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
Standard: GA4616-4045-D*** 16 spf [52 spm] 140°-20° 6.00 152.40 0.75 19.05 32.5 lb/ft 27.9 lb/ft
High Pressure: GA4616-4045A-D***-HP 16 spf [52 spm] 140°-20° 6.00 152.40 0.75 19.05 32.5 lb/ft 27.9 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]*** 16 SPF Total Number of Loadable Shots 321 225 161 097 049
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 172 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-5/8 in (117 mm) 16 SPF, SBH, Standard and High Pressure
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 4-5/8” TC-LT45-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 4-1/2”
Top Sub Wireline InsertSpring Contact Assembly
GN-R45-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 4-1/2” GN-R45-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-342OR-V95G-342OR-B342-3997
Bull Plug, 4-1/2” StandardBull plug, 4-1/2” with 2-7/8” EUE Pin
GN-R45-0022GN-R45-0023
Charge clip, Det Cord ClipLow Profile charge clip
MS-1000-004MS-1000-115
End Seal for 80 Grain Detonating Cord, Ø.24” x 0.88” DT-0875-242Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040 caSing Shot Pattern anD PhaSing at 16 SPf 140°
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; twist-lock retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.625 [117.48] / 0.4375 [11.11]Upper/Lower Thread Connections 3-15/16” - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4626 Razor SBH EC2-46B2631 Fluid 26.0g, RDX
4626 Razor SBH TL LD EC2-46A2631Fluid 26.0g, RDXFluid 26.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
16 spf / 140°-20° 7” [17.78] 0.94 [2.39] 6.27 [15.93] API RP 4316 spf / 140°-20° 7” [17.78] 0.90 [2.29] 5.50 [13.97] API RP 19B16 spf/ 140°-20° 7-3/4” [19.69] 0.96 [2.44] 5.40 [13.72] API RP 19B
Blank charge case P/N: EP-1085-100-D (4-1/2” BH LD, zinc). Charge case 46B is steel; charge case 46A is zinc. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 173 Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-3/4 in (121 mm), 24 SPF, HPHF
ENVIRONMENTALMaximum Pressure (psi)[MPa] 30,000 [207]Maximum Tensile* (lbf)[kN] 688,000 [3060] *Hardware Calculated Break Point
APPLICATION SPECIFICATIONSShot Density and Phasing Options 24 SPF (90°-45°) 90° planar, 45° between planes; Available Gun Lengths from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Super Big HoleMaximum Gun Swell (in)[mm] 4.81 [122.17] In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
45º90º
*** Total number of shots (e.g., 15’ 24 SPF, 90° gun is GA4724-3548K-N336. Refer to Available Gun Lengths.
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center
of First Scallop
Shot to Shot Distance Across
Tandem
Distance Between Planes
Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) (in) (mm) Fully Loaded
Blank Gun
GA4724-3548K-N*** 24 spf [79 spm] 90°-45° 7.00 177.80 16.90 429.26 2.0 50.80 33.40
lb/ft25.80 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 5’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75 [2.06]
4.75 [1.45]
3.75 [1.14]
2.75 [0.84]
1.75 [0.53]
*** 24 SPF Total Number of Loadable Shots 480 336 240 144 096 072 048 024
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Contact Joey Prestenbach, Global Technical Advisor
[email protected] for more information about this system
Page 174 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns4-3/4 in (121 mm), 24 SPF, HPHF
Components and Accessories Part Number(s)O-Ring Materials and Size
Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-V95G-230OR-B230-2813
Gun ConnectionOR-V95G-342OR-B342-3997
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 4-1/2” TC-LT45-000HLifting Clamp Assembly, 4.75” TC-LC-04750-0000Top Sub, 4-3/4”
Top Sub Wireline Insert; Spring Contact AssemblyGN-R475-0020
GN-E00-0011 (o-ring: OR-N569-211); GN-E00-0020Tandem Sub, 4-3/4” GN-R475-0021Bull Plugs, 4-3/4” Standard
4-3/4” with 2-7/8” EUE Pin4-3/4” with 3-1/2” EUE PinFinned Centralizing Bull Plug, 4.75” OD x 6.25”
GN-R475-0022GN-R475-0023GN-R475-0024
GN-R47523-C625Thread Protector, Top Sub (Top Pin)
Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-450-030GN-THD-450-040
UNROLLED CASING (DEG)
SHO
T SP
ACI
NG
2.00”
4.00”
6.00”
8.00”
10.00”
12.00”
03600 45 90 135 180 215 270 315
24 SPF, 4 SHOTS PER PLANE, (90/45) CLUSTERS 2” APART
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 4.75 [120.65] / 0.625 [15.88]Upper/Lower Thread Connections 3.9375 in. - 6P ACME-2G; Refer to Components and Accessories for ancillary equipment.
SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
4818 SBHEC2-48K1832
Fluid18.0g, HMX
EC2-48K1832 18.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
24 spf / 90°-45°7” [17.78] 0.73 [1.85] 4.81 [12.22] API RP 19B
† 7-3/4” [19.69] 0.63 [1.60] 3.70 [9.40] API RP 19B† Heavy weight 7-3/4” 45.51#, Q-125 casing was used in lieu of 7” 31.70# L-80. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 175 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
ENVIRONMENTAL
Conventional Long Guns5 in (127 mm) 12 SPF, SBH
Maximum Pressure (psi)[MPa] 15,400 [106.18]Maximum Tensile* (lbf)[kN] 358,400 [1594] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 12 SPF (135°-45°); Available Gun Lengths range from 4’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 5.19 [131.83] @ 32.0g In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 12 SPF, 135° gun is GA5012-3551A-C169. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA5012-3551A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 29.0 lb/ft 24.0 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 22” 21’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 21.75 [6.63] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]
*** 12 SPF Total Number of Loadable Shots 253 241 169 121 073 037
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 176 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns5 in (127 mm) 12 SPF, SBH
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
5132 Razor SBH TL LD EC2-51A3231 Fluid 32.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size^ (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
16 spf / 140°-20° 7-5/8” [19.37] 1.04 [2.64] 6.7 [17.02] API RP 19B^Heavy weight 7-5/8” 47.1# Q-110 casing used in lieu of 7-5/8” 33.7# L-80. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°caSing Shot Pattern anD PhaSing at 12 SPf 135°
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 5-1/8” TC-LT51-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 5-1/8”
Top Sub Wireline InsertSpring Contact Assembly
GN-R51-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 5-1/8” GN-R51-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-346OR-V95G-346OR-B346-4559
Bull Plugs5-1/8” Standard5-1/8” with 2-7/8” EUE PinCentralized Bull Plug, 5-1/8” with 6-1/4” O.D
GN-R51-0022GN-R51-0023
GN-R5122-C625Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-512-030GN-THD-512-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, twist lock charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 5.00 [127] / 0.375 [9.53]Upper/Lower Thread Connections 4.500 in. - 6P ACME-2G; refer to Components and Accessories for ancillary equipment
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 177 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
ENVIRONMENTAL
Conventional Long Guns5-1/8 in (130 mm) 12 SPF, XDP
Maximum Pressure (psi)[MPa] 17,200 [118.59]Maximum Tensile* (lbf)[kN] 461,800 [2054] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 12 SPF (135°-45°); Available Gun Lengths range from 4’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™ and Razor® (23g max.; grooved charge case required)Maximum Gun Swell (in)[mm] 5.34 [135.64] @ 19.0g in Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 12 SPF, 135° gun is GA5112-5033A-C169. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA5112-5033A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 31.0 lb/ft 25.0 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 22” 21’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 21.75 [6.63] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]
*** 12 SPF Total Number of Loadable Shots 253 241 169 121 073 037
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 178 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns5-1/8 in (130 mm) 12 SPF, XDP
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°caSing Shot Pattern anD PhaSing at 12 SPf 135°
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 5-1/8” TC-LT51-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 5-1/8”
Top Sub Wireline InsertSpring Contact Assembly
GN-R51-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 5-1/8” GN-R51-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-346OR-V95G-346OR-B346-4559
Bull Plugs5-1/8” Standard5-1/8” with 2-7/8” EUE PinCentralized Bull Plug, 5-1/8” with 6-1/4” O.D
GN-R51-0022GN-R51-0023
GN-R5122-C625Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-512-030GN-THD-512-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 5.125 [130.18] / 0.4375 [11.11]Upper/Lower Thread Connections 4.500 in. - 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Basix™ and Razor® EXTREME DEEP PERFORATINGProduct Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941-EG Fluid 19.0g, RDX3319 Razor DP EC2-33A1941-G Fluid 19.0g, RDX
3323 Razor XDP EC2-33A2322 Fluid † 22.7g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 135°-45° 7-5/8” [19.37] * * *12 spf / 135°-45° 7-5/8” [19.37] * * *12 spf / 135°-45° 7-5/8” [19.37] * * *
†Maximum explosive load 22.7g. For this application, 33A charges must have the grooved charge case, EP-1000-100-D. *Test results pending.GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 179 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
ENVIRONMENTAL
Conventional Long Guns5-1/8 in (130 mm) 12 SPF, SBH
Maximum Pressure (psi)[MPa] 17,200 [118.59]Maximum Tensile* (lbf)[kN] 461,800 [2054] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 12 SPF (135°-45°); Available Gun Lengths range from 4’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 5.33 [135.38] @ 32.0g In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 12 SPF, 135° gun is GA5112-3551A-C169. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA5112-3551A-C*** 12 spf [39 spm] 135°-45° 6.00 152.40 1.00 25.40 29.0 lb/ft 25.0 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 22” 21’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 21.75 [6.63] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]
*** 12 SPF Total Number of Loadable Shots 253 241 169 121 073 037
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 180 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns5-1/8 in (130 mm) 12 SPF, SBH
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, twist lock retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 5.125 [130.18] / 0.4375 [11.11]Upper/Lower Thread Connections 4.500 in. - 6P ACME-2G; refer to Components and Accessories for ancillary equipment
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°
caSing Shot Pattern anD PhaSing at 12 SPf 135°
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 5-1/8” TC-LT51-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 5-1/8”
Top Sub Wireline InsertSpring Contact Assembly
GN-R51-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 5-1/8” GN-R51-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-346OR-V95G-346OR-B346-4559
Bull Plugs5-1/8” Standard5-1/8” with 2-7/8” EUE PinCentralized Bull Plug, 5-1/8” with 6-1/4” O.D
GN-R51-0022GN-R51-0023
GN-R5122-C625Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-512-030GN-THD-512-040
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
5132 Razor SBH TL LD EC2-51A3231 Fluid 32.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
16 spf / 140°-20° 7-5/8” [19.37] 1.07 [2.72] 6.60 [16.76] API RP 19B
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 181 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
ENVIRONMENTAL
Conventional Long Guns5-1/8 in (130 mm) 16 SPF, SBH
Maximum Pressure (psi)[MPa] 17,200 [118.59]Maximum Tensile* (lbf)[kN] 461,800 [2054] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 16 SPF (140°-20°); Available Gun Lengths range from 3’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 5.33 [135.38] @ 32.0g In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 16 SPF, 140° gun is GA5116-3551A-D225. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA5116-3551A-D*** 16 spf [52 spm] 140°-20° 6.00 152.40 0.75 19.05 30.08 lb/ft 25.10 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 22” 21’ 15’ 11’ 7’ 4’ 3’Typical Gun Length (ft) [m] 21.75 [6.63] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84]
***16 SPF Total Number of Loadable Shots 337 321 225 161 097 049 033
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 182 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns5-1/8 in (130 mm) 16 SPF, SBH
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, twist lock charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 5.125 [130.18] / 0.4375 [11.11]Upper/Lower Thread Connections 4.500 in. - 6P ACME-2G; refer to Components and Accessories for ancillary equipment
caSing Shot Pattern anD PhaSing at 16 SPf 140°
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 5-1/8” TC-LT51-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 5-1/8”
Top Sub Wireline InsertSpring Contact Assembly
GN-R51-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 5-1/8” GN-R51-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-346OR-V95G-346OR-B346-4559
Bull Plugs5-1/8” Standard5-1/8” with 2-7/8” EUE PinCentralized Bull Plug, 5-1/8” with 6-1/4” O.D
GN-R51-0022GN-R51-0023
GN-R5122-C625Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-512-030GN-THD-512-040
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
5132 Razor SBH TL LD EC2-51A3231 Fluid 32.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
16 spf / 140°-20° 7-5/8” [19.37] 1.07 [2.72] 6.60 [16.76] API RP 19B
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 183 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
ENVIRONMENTAL
Conventional Long Guns5-1/8 in (130 mm) 22 SPF, GH and DP
Maximum Pressure (psi)[MPa] 15,400 [106.18]Maximum Tensile* (lbf)[kN] 461,800 [2054] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 22 SPF (140°-20°); Available Gun Lengths range from 3’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™ and Razor® (19g max.; grooved charge case required)Maximum Gun Swell (in)[mm] 5.34 [135.64] @ 19.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 22 SPF, 140° gun is GA5122-5033A-D309. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA5122-5033A-D*** 22 spf [72 spm] 140°-20° 6.00 152.40 0.5454 13.85 36.4 lb/ft 25.0 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’ 3’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84]
*** 22 SPF Total Number of Loadable Shots 441 309 221 133 067 045
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 184 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns5-1/8 in (130 mm) 22 SPF, GH and DP
Components and Accessories Part Number(s)Top Sub Lift Sub Assembly, 5-1/8” TC-LT51-000HTCP Transfer Kit (4-1/2” through 7”) GN-000-0030Top Sub, 5-1/8”
Top Sub Wireline InsertSpring Contact Assembly
GN-R51-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 5-1/8” GN-R51-0021O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-346OR-V95G-346OR-B346-4559
Bull Plugs5-1/8” Standard5-1/8” with 2-7/8” EUE PinCentralized Bull Plug, 5-1/8” with 6-1/4” O.D
GN-R51-0022GN-R51-0023
GN-R5122-C625Thread Protectors
Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-512-030GN-THD-512-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, twist lock charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 5.125 [130.18] / 0.4375 [11.11]Upper/Lower Thread Connections 4.500 in. - 6P ACME-2G; refer to Components and Accessories for ancillary equipment
Basix™ and Razor® GOOD HOLE, DP, and XDPProduct Name Part Number Perforating
Condition Explosive
3319 Basix GH EC2-33A1941-EG
Fluid
† 19.0g, RDX3319 Razor DP EC2-33A1941-G † 19.0g, RDX
3319 Razor XDP EC2-33A1922 † 19.0g, HMX3319 Razor GH EC2-33A1942 † 19.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
22 spf / 140°-20° 7-5/8” [19.37] * * API RP 43
† Maximum explosive load 19.0g. For this application, 33A charges must have the grooved charge case, EP-1000-100-D. *Performance test results pending.Please contact your sales representative for more details.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 185 Revised: July 24, 2020 1:30 PM
Conventional Long Guns6-3/4 in (171 mm), 22 SPF, HPHF
ENVIRONMENTALMaximum Pressure (psi)[MPa] 30,000 [207]Maximum Tensile* (lbf)[kN] 1,229,000 [5466] *Hardware Calculated Break Point
APPLICATION SPECIFICATIONSShot Density and Phasing Options 22 SPF (90°-45°) 90° planar, 45° between planes; Available Gun Lengths from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Super Big HoleMaximum Gun Swell (in)[mm] 6.83 [173.48] In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
45º90º
*** Total number of shots (e.g., 15’ 22 SPF, 90° gun is GA6722-2068K-N304. Refer to Available Gun Lengths.
Carrier Assembly Part NumberShot Density & Phasing Gun End to Center
of First Scallop
Shot to Shot Distance Across
Tandem
Distance Between Planes
Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) (in) (mm) Fully Loaded
Blank Gun
GA6722-2068K-N*** 22 spf [72 spm] 90°-45° 8.18 207.77 19.26 489.20 2.19 55.63 76.70
lb/ft60.20 lb/ft5ft and longer guns
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 5’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75 [2.06]
4.75 [1.45]
3.75 [1.14]
2.75 [0.84]
1.75 [0.53]
*** 22 SPF Total Number of Loadable Shots 436 304 216 128 084 060 040 016
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Contact Joey Prestenbach, Global Technical Advisor
[email protected] for more information about this system
Page 186 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns6-3/4 in (171 mm), 22 SPF, HPHF
Components and Accessories Part Number(s)O-Ring Materials and Size
Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-V95G-230OR-B230-2813
Gun ConnectionOR-V95G-357OR-B357-5873
TCP Transfer Kit, Long Transfer GN-000-0035Lift Sub Assembly, Tandem, 4-1/2” TC-LT45-000H (threads into bottom part of 2-piece tandem)Top Sub, 6-3/4”
Top Sub Wireline Insert; Spring Contact AssemblyGN-R675D20
GN-E00-0011 (o-ring: OR-N569-211); GN-E00-0020Two Piece Tandem 6-3/4” w/8-1/4” Centralizing Ring GN-R675D21-Z827-CT
Two Piece Tandem 6-3/4” (Top)GN-R675D21-Z1 (o-rings: OR-V95G-237, OR-V95G-357; back-up rings: OR-B357-5873)
Two Piece Tandem 6-3/4” (Bottom)GN-R675D21-Z2 (o-rings: OR-V95G-342, OR-V95G-357; back-up rings: OR-B342-3997, OR-B357-5873)
Centralizing Ring 6-3/4” (8.270” OD)Sub Wrench
GN-RH675-R827GN-R675D21-ZTL
Bull Plugs, 6-3/4” Standard6-3/4” with 2-7/8” EUE Pin6-3/4” with 3-1/2” EUE PinCentralized with 2-7/8” EUE PinCentralized with 3-1/2” EUE Pin
GN-R675D22GN-R675D23GN-R675D24
GN-R675D23-C825GN-R675D24-C825
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-675-030GN-THD-675-040
UNROLLED CASING (DEG)
SHO
T SP
ACI
NG
2.19”
4.36”
6.54”
8.72”
10.91”
13.09”
15.27”
17.45”
19.64”
21.82”
24”
03600 45 90 135 180 215 270 315
22 SPF, 4 SHOTS PER PLANE, (90/45) CLUSTERS 2-2/11” APART
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 6.75 [171] / 0.875 [22.23]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
6852 SBHEC2-68K5232
Fluid52.0g, HMX
EC2-68K5232 52.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
22 spf / 90°-45°9-5/8” [24.45] 1.08 [2.74] 5.62 [14.27] API RP 19B
† 9-7/8” [25.08] 0.97 [2.46] 5.35 [13.59] API RP 19B† Heavy weight 9-7/8” 61.80#, Q-125 casing was used in lieu of 9-5/8” 46.18# L-80. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 187 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
Conventional Long Guns7 in (178 mm), 12 SPF, GH and DP
ENVIRONMENTALMaximum Pressure (psi)[MPa] 13,500 [93]Maximum Tensile* (lbf)[kN] 770,700 [3,428] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 12 SPF (135°-45°); Available Gun Lengths range from 2’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Basix™, Razor®, and Connex®
Maximum Gun Swell (in)[mm] 7.28 [184.91] @ 39.0g
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
CARRIER SPECIFICATIONS
Available Gun Lengths 22’ 21’ 15’ 11’ 7’ 6’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 21.75 [6.63]
20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75 [2.06]
5.75 [1.75]
3.75 [1.14]
2.75 [0.84]
1.75 [0.53]
*** 12 SPF Total Number of Loadable Shots 250 238 166 118 70 58 34 22 10Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
*** Total number of shots (e.g., 11’ 12 SPF, 135° DP gun is GA7012-3040A-C118. Refer to Available Gun Lengths.
Carrier Assembly Part Numbers Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank GunStandard: GA7012-3040A-C*** 12 spf [39 spm] 135°-45° 7.50 190.50 1.0 25.40 49.14 lb/ft 42.25 lb/ft
Page 188 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns7 in (178 mm), 12 SPF, GH and DP
Razor® EXTRA DEEP PENETRATINGProduct Name Part Number Perforating
Condition Explosive
4039 Razor XDP EC2-40A3922 Fluid 39.0g, HMX
Shot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf / 135°-45° 9-5/8” [24.45] 0.41 [1.04] 53.60 [136.14] API RP 43
Connex®
Product Name Part Number Perforating Condition Explosive
4039 Connex EC2-40A3922-RC Fluid 39.0g, HMX
Shot Density and Phasing
API Casing API Heavy Wall^ Penetration Stressed BereaSize
(in)[cm] Entrance Hole
(in)[cm]Entrance Hole
(in)[cm] API 19B Sec. 2 (in)[cm]12 spf / 135°-45° 9-5/8 [24.45] 0.44 [1.12] 0.44 [1.12] 17.65 [44.83]
^ API Heavy wall casing is equivalent to 0.500” 120KSI yield. GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
Basix™ GOOD HOLEProduct Name Part Number Perforating
Condition Explosive
4039 Basix GH EC2-40A3941 Fluid 39.0g, RDX4039 Basix GH EC2-40A3941-C* Fluid 39.0g, RDX
*EC2-40A3941-C is a speciality charge for multi-string casing scenarios.
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
12 spf/135°-45° 9-5/8” [24.45] 0.80 [2.03] 15.42 [39.17] API RP 4312 spf/135°-45° 9-5/8” [24.45] 0.50 [1.27] 28.00 [71.12] QC
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 189 Revised: July 24, 2020 1:30 PM
Conventional Long Guns7 in (178 mm), 12 SPF, GH and DP
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°
caSing Shot Pattern anD PhaSing at 12 SPf 135°
Components and Accessories Part Number(s)O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-360OR-V95G-360OR-B360-6309
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 5-1/8” TC-LT51-000HTop Sub, 7”
Top Sub Wireline InsertSpring Contact Assembly
GN-R70-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 7” GN-R70-0021 (o-rings: OR-N569-360)Two Piece Tandem 7” with 8-1/4” Centralizing Ring GN-R70-0021-Z825
Two Piece Tandem 7” (Top)GN-R70-0021-Z1 (o-rings: OR-V95G-241, OR-V95G-360; back-up rings: OR-B360-6309)
Two Piece Tandem 7” (Bottom)GN-R70-0021-Z2 (o-rings: OR-V95G-346, OR-V95G-360; back-up rings: OR-B346-4559, OR-B360-6309)
Centralizing Ring 7” (8-1/4” OD)Sub Wrench
GN-RH70-R825GN-R70-0021-ZTL
Bull Plugs, 7” Standard7” with 2-7/8” EUE Pin7” with 3-1/2” EUE Pin
GN-R70-0022GN-R70-0023GN-R70-0024
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-700-030GN-THD-700-040
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; bend tab retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 7.00 [178] / 0.50 [12.7]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Page 190 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 191 Revised: July 24, 2020 1:30 PM
APPLICATION SPECIFICATIONS
Conventional Long Guns7 in (178 mm), 12 SPF, SBH
ENVIRONMENTALMaximum Pressure (psi)[MPa] 13,500 [93]Maximum Tensile* (lbf)[kN] 770,700 [3,428] *Hardware Calculated Breaking Point
Shot Density and Phasing Options 12 SPF (135°-45°); Available Gun Lengths range from 2’ to 22’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 7.15 [181.61] @ 52.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
CARRIER SPECIFICATIONS
Available Gun Lengths 22’ 21’ 15’ 11’ 7’ 6’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 21.75 [6.63]
20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75 [2.06]
5.75 [1.75]
3.75 [1.14]
2.75 [0.84]
1.75 [0.53]
*** 12 SPF Total Number of Loadable Shots 250 238 166 118 70 58 34 22 10Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
*** Total number of shots (e.g., 11’ 12 SPF, 135° SBH gun is GA7012-2070C-C118. Refer to Available Gun Lengths.
Carrier Assembly Part Numbers Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank GunStandard: GA7012-2070C-C*** 12 spf [39 spm] 135°-45° 7.50 190.50 1.0 25.40 49.14 lb/ft 42.25 lb/ft
Page 192 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns7 in (178 mm), 12 SPF, SBH
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; twist-lock retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 7.00 [178] / 0.50 [12.7]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
0°
1”
12”
45° 90° 135° 180° 215° 270° 315° 360°
caSing Shot Pattern anD PhaSing at 12 SPf 135°
Components and Accessories Part Number(s)O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-360OR-V95G-360OR-B360-6309
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 5-1/8” TC-LT51-000HTop Sub, 7”
Top Sub Wireline InsertSpring Contact Assembly
GN-R70-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 7” GN-R70-0021 (o-rings: OR-N569-360)Two Piece Tandem 7” with 8-1/4” Centralizing Ring GN-R70-0021-Z825
Two Piece Tandem 7” (Top)GN-R70-0021-Z1 (o-rings: OR-V95G-241, OR-V95G-360; back-up rings: OR-B360-6309)
Two Piece Tandem 7” (Bottom)GN-R70-0021-Z2 (o-rings: OR-V95G-346, OR-V95G-360; back-up rings: OR-B346-4559, OR-B360-6309)
Centralizing Ring 7” (8-1/4” OD)Sub Wrench
GN-RH70-R825GN-R70-0021-ZTL
Bull Plugs, 7” Standard7” with 2-7/8” EUE Pin7” with 3-1/2” EUE Pin
GN-R70-0022GN-R70-0023GN-R70-0024
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-700-030GN-THD-700-040
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
7039 Razor SBH TL LD EC2-70C3931 Fluid 39.0g, RDX7052 Razor SBH TL LD EC2-70C5231 Fluid 52.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
15 spf / 140°-20° 9-5/8” [24.45] 1.24 [3.15] 7.08 [17.98] API RP 4315 spf / 140°-20° 9-5/8” [24.45] 1.39 [3.53] 6.50 [16.51] API RP 19B
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 193 Revised: July 24, 2020 1:30 PM
Conventional Long Guns7 in (178 mm), 15 SPF, SBH, Standard and High Pressure
APPLICATION SPECIFICATIONSShot Density and Phasing Options 15 SPF (140°-20°); Available Gun Lengths from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 7.23 [183.64] @ 52.0g, In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 11’ 15 SPF, 140° gun is GA7015-2070C-D147. Refer to Available Gun Lengths.
Carrier Assembly Part Numbers Shot Density & Phasing Gun End to Center of First Scallop
Distance Shot to Shot Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank GunStandard: GA7015-2070C-D*** 15 spf [49 spm] 140°-20° 7.60 193.04 0.80 20.32 50.87 lb/ft 42.25 lb/ft
High Pressure: GA7015-2070C-D***-HP 15 spf [49 spm] 140°-20° 7.60 193.04 0.80 20.32 50.87 lb/ft 42.25 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 22’ 21’ 15’ 11’ 7’ 4’ 3’
Typical Gun Length (ft) [m] 21.75 [6.63]
20.75 [6.32]
14.75 [4.50]
10.75 [3.28] 6.75 [2.06] 3.75 [1.14] 2.75 [0.84]
*** 15 SPF Total Number of Loadable Shots 312 297 207 147 087 042 027Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
ENVIRONMENTALStandard High Pressure
Maximum Pressure (psi)[MPa] 13,500 [93] 14,600 [100]Maximum Tensile* (lbf)[kN] 770,700 [3,428] 770,700 [3,428] *Hardware Calculated Breaking Point
Page 194 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Conventional Long Guns7 in (178 mm), 15 SPF, SBH, Standard and High Pressure
Components and Accessories Part Number(s)O-Ring Materials and Size
Nitrile (standard option)Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
Top ConnectionOR-N569-230OR-V95G-230OR-B230-2813
Gun ConnectionOR-N569-360OR-V95G-360OR-B360-6309
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 5-1/8” TC-LT51-000HTop Sub, 7”
Top Sub Wireline InsertSpring Contact Assembly
GN-R70-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 7” GN-R70-0021 (o-rings: OR-N569-360)Two Piece Tandem 7” with 8-1/4” Centralizing Ring GN-R70-0021-Z825
Two Piece Tandem 7” (Top)GN-R70-0021-Z1 (o-rings: OR-V95G-241, OR-V95G-360; back-up rings: OR-B360-6309)
Two Piece Tandem 7” (Bottom)GN-R70-0021-Z2 (o-rings: OR-V95G-346, OR-V95G-360; back-up rings: OR-B346-4559, OR-B360-6309)
Centralizing Ring 7” (8-1/4” OD)Sub Wrench
GN-RH70-R825GN-R70-0021-ZTL
Bull Plugs, 7” Standard7” with 2-7/8” EUE Pin7” with 3-1/2” EUE Pin
GN-R70-0022GN-R70-0023GN-R70-0024
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-700-030GN-THD-700-040
0°
12”
40° 80° 120° 160° 200° 240° 280° 320° 360°
caSing Shot Pattern anD PhaSing at 15 SPf 140°
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip; twist-lock retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 7.069 [180] / 0.53 [13.5]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
7039 Razor SBH TL LD EC2-70C3931 Fluid 39.0g, RDX7052 Razor SBH TL LD EC2-70C5231 Fluid 52.0g, RDX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
15 spf / 140°-20° 9-5/8” [24.45] 1.24 [3.15] 7.08 [17.98] API RP 4315 spf / 140°-20° 9-5/8” [24.45] 1.39 [3.53] 6.50 [16.51] API RP 19B
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 195 Revised: July 24, 2020 1:30 PM
Channel Finder Gun System7 in (178 mm), 18 SPF, SBH, 360°
ENVIRONMENTALMaximum Pressure (psi)[MPa] 11,500 [79]Maximum Tensile* (lbf)[kN] 770,700 [3,428] *Hardware Calculated Break Point
APPLICATION SPECIFICATIONSShot Density and Phasing Options 18 SPF (90°) rotated cluster 11.25° spiral; Available Gun Lengths from 4’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 7.22 [183.39] In FluidPerforation Area Open to Flow 360° coverage in 9-5/8” casing
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
*** Total number of shots (e.g., 15’ 18 SPF, 90° gun is GA7018-1870K-Q252. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Between Planes Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA7018-1870K-Q*** 18 spf [59 spm]
90° Planar 11.25° Spiral
4’ guns = 8.00 203.202.67 67.82 55.94 lb/ft 34.27 lb/ft
7’-21’ guns = 7.333 186.18
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 4’Typical Gun Length (ft) [m] 20.75 [6.32] 14.75 [4.50] 10.75 [3.28] 6.75 [2.06] 3.75 [1.14]
*** 18 SPF Total Number of Loadable Shots 360 252 180 108 052
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 196 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Channel Finder Gun System7 in (178 mm), 18 SPF, SBH, 360°
Components and Accessories Part Number(s)O-Ring Materials and Size
Nitrile (standard option)Top ConnectionOR-N569-230
Gun ConnectionOR-N569-360
Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
OR-V95G-230OR-B230-2813
OR-V95G-360OR-B360-6309
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 5-1/8” TC-LT51-000HTop Sub, 7”
Top Sub Wireline InsertSpring Contact Assembly
GN-R70-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 7” GN-R70-0021 (o-rings: OR-N569-360)Two Piece Tandem 7” with 8-1/4” Centralizing Ring GN-R70-0021-Z825
Two Piece Tandem 7” (Top)GN-R70-0021-Z1 (o-rings: OR-V95G-241, OR-V95G-360; back-up rings: OR-B360-6309)
Two Piece Tandem 7” (Bottom)GN-R70-0021-Z2 (o-rings: OR-V95G-346, OR-V95G-360; back-up rings: OR-B346-4559, OR-B360-6309)
Centralizing Ring 7” (8-1/4” OD)Sub Wrench
GN-RH70-R825GN-R70-0021-ZTL
Bull Plugs, 7” Standard7” with 2-7/8” EUE Pin7” with 3-1/2” EUE Pin
GN-R70-0022GN-R70-0023GN-R70-0024
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-700-030GN-THD-700-040
21.3321.33CARRIER CARRIER REPEATREPEAT
ENTRY HOLEENTRY HOLE
30.24 REF.30.24 REF.(CASING UN-ROLLED)(CASING UN-ROLLED)
0/360°0/360°
2.67”2.67”
1.04”1.04”
0/360°0/360°90°90°45°45° 180°180°135°135° 270°270° 315°315°225°225°
SHOWN 9-5/8" CASING (FLAT)7" 18 SPF, ROTATED CLUSTER 11.25° SPIRAL SYSTEM
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 7.00 [178] / 0.50 [12.7]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
7039K Razor SBH EC2-70K3931 Fluid 39.0g, RDX7052K Razor SBH EC2-70K5231 Fluid 52.0g, RDX7052K Razor SBH EC2-70K5232 Fluid 52.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
20 spf / 90°-45° 9-5/8” [24.45] 1.04 [2.64] 6.31 [16.03] API RP 19B20 spf / 90°-45° 9-5/8” [24.45] 1.40 [3.56] 5.35 [13.59] API RP 19B20 spf / 90°-45° 9-5/8” [24.45] 1.42 [3.61] 7.06 [17.93] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 197 Revised: July 24, 2020 1:30 PM
Eclipse Gun System7 in (178 mm), 20 SPF, SBH
ENVIRONMENTALMaximum Pressure (psi)[MPa] 11,500 [79]Maximum Tensile* (lbf)[kN] 770,700 [3,428] *Hardware Calculated Break Point
APPLICATION SPECIFICATIONSShot Density and Phasing Options 20 SPF (90°-45°) 90° planar, 45° between planes; Available Gun Lengths from 2’ to 21’ Initiation Point Top- or bottom-fired options available; conventional wireline and TCPMode of Fire Simultaneous or selective fireDetonating Cord 80-grain roundCompatible Perforating Charges Razor®
Maximum Gun Swell (in)[mm] 7.22 [183.39] In Fluid
GEODynamics’ perforating systems use bi-directional boosters, non-lead azide explosives, customized connectors and inserts, and high-velocity, low-shrink detonating cord. Additionally, all GEODynamics gun assemblies are scalloped to optimize charge performance and prevent casing damage from perforating exit hole burrs. Shot phasing is designed to maintain the integrity and collapse resistance of the casing after perforating. These attributes, along with premium quality gun material and gun connectors, allow GEODynamics to deliver safe, efficient, and reliable perforating gun solutions to our customers.
45º90º
*** Total number of shots (e.g., 15’ 20 SPF, 90° gun is GA7020-1870K-N276. Refer to Available Gun Lengths.
Carrier Assembly Part Number Shot Density & Phasing Gun End to Center of First Scallop
Distance Between Planes Approximate Weights
(spf) [spm] Phasing (in) (mm) (in) (mm) Fully Loaded Blank Gun
GA7020-1870K-N*** 20 spf [66 spm] 90°-45° 8.40 213.36 2.40 60.96 55.94 lb/ft 34.27 lb/ft
CARRIER SPECIFICATIONS
Available Gun Lengths 21’ 15’ 11’ 7’ 5’ 4’ 3’ 2’
Typical Gun Length (ft) [m] 20.75 [6.32]
14.75 [4.50]
10.75 [3.28]
6.75 [2.06]
4.75 [1.45]
3.75 [1.14]
2.75 [0.84]
1.75 [0.53]
*** 20 SPF Total Number of Loadable Shots 396 276 196 116 076 056 036 016
Contact your local GEODynamics representative for availability of metric part numbers and additional gun lengths.
Page 198 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Eclipse Gun System7 in (178 mm), 20 SPF, SBH
Components and Accessories Part Number(s)O-Ring Materials and Size
Nitrile (standard option)Top ConnectionOR-N569-230
Gun ConnectionOR-N569-360
Viton (with back-up rings required for > 325°F)Back-up rings for > 325°F
OR-V95G-230OR-B230-2813
OR-V95G-360OR-B360-6309
TCP Transfer Kit (4-1/2” through 7”) GN-000-0030Lift Sub Assembly, Tandem, 5-1/8” TC-LT51-000HTop Sub, 7”
Top Sub Wireline InsertSpring Contact Assembly
GN-R70-0020GN-E00-0011 (o-ring: OR-N569-211)
GN-E00-0020Tandem Sub, 7” GN-R70-0021 (o-rings: OR-N569-360)Two Piece Tandem 7” with 8-1/4” Centralizing Ring GN-R70-0021-Z825
Two Piece Tandem 7” (Top)GN-R70-0021-Z1 (o-rings: OR-V95G-241, OR-V95G-360; back-up rings: OR-B360-6309)
Two Piece Tandem 7” (Bottom)GN-R70-0021-Z2 (o-rings: OR-V95G-346, OR-V95G-360; back-up rings: OR-B346-4559, OR-B360-6309)
Centralizing Ring 7” (8-1/4” OD)Sub Wrench
GN-RH70-R825GN-R70-0021-ZTL
Bull Plugs, 7” Standard7” with 2-7/8” EUE Pin7” with 3-1/2” EUE Pin
GN-R70-0022GN-R70-0023GN-R70-0024
Thread Protector, Top Sub (Top Pin)Carrier (Gun) ProtectorTandem Sub & Bull Plug Protector
GN-THD-312-020GN-THD-700-030GN-THD-700-040
0 45 90 135 180 215 0/3600
2.4"
4.8"
7.2"
9.6"
12"
UNROLLED CASING (DEG)
SHO
T SP
ACIN
G
270 315
20 SPF, 4 SHOTS PER PLANE, (90/45)
caSing Shot Pattern anD PhaSing at 20 SPf 90°
HARDWAREGun Body Configuration/Material Threaded and scalloped, proprietary gun steel, similar to 41XX alloy steelCharge Tube Type & Retention Round steel tube strip, bend tab charge retentionType of Tandem Connection Booster to booster (no splice)Nominal OD / Wall Thickness (in)[mm] 7.00 [178] / 0.50 [12.7]Upper/Lower Thread Connections 6.25 in. - 5P ACME-2G; Refer to Components and Accessories for ancillary equipment.
Razor® SUPER BIG HOLEProduct Name Part Number Perforating
Condition Explosive
7039K Razor SBH EC2-70K3931 Fluid 39.0g, RDX7052K Razor SBH EC2-70K5231 Fluid 52.0g, RDX7052K Razor SBH EC2-70K5232 Fluid 52.0g, HMX
API PerformanceShot Density and Phasing
API Casing Size (in)[cm]
Entrance Hole (in)[cm]
Penetration(in)[cm] (test)
20 spf / 90°-45° 9-5/8” [24.45] 1.04 [2.64] 6.31 [16.03] API RP 19B20 spf / 90°-45° 9-5/8” [24.45] 1.40 [3.56] 5.35 [13.59] API RP 19B20 spf / 90°-45° 9-5/8” [24.45] 1.42 [3.61] 7.06 [17.93] API RP 43
GEODynamics charges are available in RDX, HMX, and HNS. Please contact your sales representative for more information.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 199 Revised: July 24, 2020 1:30 PM
Slickwall SystemsSlickwall Guns with Keyway
Gun O.D. Part Number Description
2-7/8”
GE2806-6827A-A036 Slickgun Assy, 2-7/8” x 7`, 6 spf, 60° Phased, With KeywayGE2806-6827A-A060 Slickgun Assy, 2-7/8” x 11`, 6 spf, 60° Phased, With KeywayGE2806-6827A-A084 Slickgun Assy, 2-7/8” x 15`, 6 spf, 60° Phased, With KeywayGE2806-6827A-A120 Slickgun Assy, 2-7/8” x 21`, 6 spf, 60° Phased, With Keyway
3-1/8”
GE3106-6033A-A006 Carrier Assy, 3-1/8” x 2’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A009 Carrier Assy, 3-1/8” x 2.5’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A012 Carrier Assy, 3-1/8” x 3’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A018 Carrier Assy, 3-1/8” x 4’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A024 Carrier Assy, 3-1/8” x 5’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A030 Carrier Assy, 3-1/8” x 6’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A036 Carrier Assy, 3-1/8” x 7’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A048 Carrier Assy, 3-1/8” x 9’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A060 Carrier Assy, 3-1/8” x 11’, 6 spf 60°, HP SW With KeywayGE3106-6033A-A084 Carrier Assy, 3-1/8” x 15’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A090 Carrier Assy, 3-1/8” x 16’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A120 Carrier Assy, 3-1/8” x 21’, 6 spf, 60°, HP SW With KeywayGE3106-6033A-A126 Carrier Assy, 3-1/8” x 22’, 6 spf, 60°, HP SW With Keyway
3-3/8”
GE3306-6033A-A012 Carrier Assy, 3-3/8” x 3’, 6 spf, 60 Deg., HP SW With KeywayGE3306-6033A-A036 Carrier Assy, 3-3/8” x 7’, 6 spf, 60°, HP SW With KeywayGE3306-6033A-A060 Carrier Assy, 3-3/8” x 11’, 6 spf, 60°, HP SW With KeywayGE3306-6033A-A084 Carrier Assy, 3-3/8” x 15’, 6 spf, 60°, HP SW With KeywayGE3306-6033A-A120 Carrier Assy, 3-3/8” x 21’, 6 spf, 60°, HP SW With Keyway
4”
GE4006-6033A-A012 Carrier Assy, 4” x 3’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A024 Carrier Assy, 4” x 5’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A030 Carrier Assy, 4” x 6’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A036 Carrier Assy, 4” x 7’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A048 Carrier Assy, 4” x 9’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A060 Carrier Assy, 4” x 11’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A084 Carrier Assy, 4” x 15’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A096 Carrier Assy, 4” x 17’, 6 spf, 60 Deg., HP SW With KeywayGE4006-6033A-A120 Carrier Assy, 4” x 21’, 6 spf, 60 Deg., HP SW With Keyway
SLICKWALL GUN SYSTEMS with KEYWAY
Page 200 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Slickwall SystemsSlickwall Carriers
O.D. Part Number Description
2”
CSW-20G145-012 Carrier Slickwall, 2" x 1'CSW-20G145-015 Carrier Slickwall, 2" x 1.25'CSW-20G145-021 Carrier Slickwall, 2" x 2'CSW-20G145-033 Carrier Slickwall, 2" x 3'CSW-20G145-045 Carrier Slickwall, 2" x 4'CSW-20G145-081 Carrier Slickwall, 2" x 7'CSW-20G145-084 Slick Wall Carrier, 2" x 7'CSW-20G145-129 Carrier Slickwall, 2" x 11'CSW-20G145-177 Carrier Slickwall, 2" x 15'CSW-20G145-189 Carrier Slickwall, 2" x 16'CSW-20G145-249 Carrier Slickwall, 2" x 21'CSW-20G145-261 Carrier Slickwall, 2" x 22'
2-7/8”
CSW-28G-130-012 Carrier Slickwall - 2-7/8" x 1'CSW-28G130-024 Carrier Slickwall - 2-7/8" x 2'CSW-28G130-132 Carrier Slickwall - 2-7/8" x 11'CSW-28G130-180 Carrier Slickwall - 2-7/8" x 15'CSW-28G130-252 Carrier Slickwall - 2-7/8" x 21'CSW-28G130-336 Carrier Slickwall - 2-7/8in x 28'
3-1/8” G130
Material
CSW-31G130-012 Slick Wall Carrier, 3-1/8" x 1'CSW-31G130-015 Carrier Slickwall- 3-1/8" x 1.25'
CSW-31G130-0155 Carrier Slickwall- 3-1/8" x 1.29'CSW-31G130-018 Carrier Slickwall- 3-1/8" x 1.5', G130 MaterialCSW-31G130-024 Carrier Slickwall- 3-1/8" x 2', G130 MaterialCSW-31G130-030 Carrier Slickwall- 3-1/8" x 2.5', G130 MaterialCSW-31G130-036 Carrier Slickwall- 3-1/8" x 3', G130 MaterialCSW-31G130-048 Carrier Slickwall- 3-1/8" x 4', G130 MaterialCSW-31G130-060 Carrier Slickwall- 3-1/8" x 5', G130 MaterialCSW-31G130-072 Carrier, Slickwall, 3-1/8" x 6', G130 materialCSW-31G130-084 Carrier Slickwall- 3-1/8" x 7', G130 MaterialCSW-31G130-096 Carrier Slickwall- 3-1/8" x 8', G130 MaterialCSW-31G130-108 Carrier Slickwall- 3-1/8" x 9', G130 MaterialCSW-31G130-120 Carrier Slickwall- 3-1/8" x 10', G130 MaterialCSW-31G130-132 Carrier Slickwall- 3-1/8" x 11', G130 MaterialCSW-31G130-144 Carrier Slickwall- 3-1/8" x 12', G130 MaterialCSW-31G130-156 Carrier Slickwall- 3-1/8" x 13', G130 MaterialCSW-31G130-180 Carrier Slickwall- 3-1/8" x 15', G130 MaterialCSW-31G130-192 Carrier Slickwall- 3-1/8" x 16', G130 Material
SLICKWALL CARRIERSO.D. Part Number Description
3-1/8” G130 cont.
CSW-31G130-204 Carrier Slickwall- 3-1/8" x 17', G130 MaterialCSW-31G130-216 Carrier Slickwall- 3-1/8" x 18', G130 MaterialCSW-31G130-228 Carrier Slickwall- 3-1/8" x 19', G130 MaterialCSW-31G130-240 Carrier Slickwall- 3-1/8" x 20', G130 MaterialCSW-31G130-252 Carrier Slickwall- 3-1/8" x 21', G130 Material
3-1/8” X42
Material
CSW-31X42-024 Carrier Slickwall- 3-1/8in x 2', X42 Material, 7500 psiCSW-31X42-036 Carrier Slickwall- 3-1/8in x 3', X42 Material, 7500 psiCSW-31X42-048 Carrier Slickwall- 3-1/8in x 4', X42 Material, 7500 psiCSW-31X42-060 Carrier Slickwall- 3-1/8in x 5', X42 Material, 7500 psiCSW-31X42-072 Carrier Slickwall- 3-1/8in x 6', X42 Material, 7500 psiCSW-31X42-084 Carrier Slickwall- 3-1/8in x 7', X42 Material, 7500 psiCSW-31X42-108 Carrier Slickwall- 3-1/8in x 9', X42 Material, 7500 psiCSW-31X42-132 Carrier Slickwall- 3-1/8in x 11', X42 Material, 7500 psiCSW-31X42-156 Carrier Slickwall- 3-1/8in x 13', X42 Material, 7500 psiCSW-31X42-180 Carrier Slickwall- 3-1/8in x 15', X42 Material, 7500 psiCSW-31X42-192 Carrier Slickwall- 3-1/8in x 16', X42 Material, 7500 psiCSW-31X42-204 Carrier Slickwall- 3-1/8in x 17', X42 Material, 7500 psiCSW-31X42-228 Carrier Slickwall- 3-1/8in x 19', X42 Material, 7500 psiCSW-31X42-252 Carrier Slickwall- 3-1/8in x 21', X42 Material, 7500 psiCSW-31X42-300 Carrier Slickwall- 3-1/8in x 25', X42 Material, 7500 psi
3-3/8” G130
Material
CSW-33G130-012 Carrier Slickwall- 3-3/8" x 1', G130 MaterialCSW-33G130-015 Carrier Slickwall- 3-3/8" x 1.25', G130 MaterialCSW-33G130-024 Carrier Slickwall- 3-3/8" x 2', G130 MaterialCSW-33G130-030 Carrier Slickwall- 3-3/8" x 2.5', G130 MaterialCSW-33G130-036 Carrier Slickwall- 3-3/8" x 3', G130 MaterialCSW-33G130-048 Carrier Slickwall- 3-3/8" x 4', G130 MaterialCSW-33G130-060 Carrier Slickwall- 3-3/8" x 5', G130 MaterialCSW-33G130-072 Carrier Slickwall- 3-3/8" x 6', G130 MaterialCSW-33G130-084 Carrier Slickwall- 3-3/8" x 7', G130 MaterialCSW-33G130-108 Carrier Slickwall- 3-3/8" x 9', G130 MaterialCSW-33G130-120 Carrier Slickwall- 3-3/8" x 10', G130 MaterialCSW-33G130-132 Carrier Slickwall- 3-3/8" x 11', G130 MaterialCSW-33G130-144 Carrier Slickwall- 3-3/8" x 12', G130 MaterialCSW-33G130-156 Carrier Slickwall- 3-3/8" x 13', G130 MaterialCSW-33G130-180 Carrier Slickwall- 3-3/8" x 15', G130 MaterialCSW-33G130-192 Carrier Slickwall- 3-3/8" x 16', G130 MaterialCSW-33G130-252 Carrier Slickwall- 3-3/8" x 21', G130 Material
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 201 Revised: July 24, 2020 1:30 PM
Slickwall SystemsSlickwall Carriers
O.D. Part Number Description
4” G130
Material
CSW-40G130-012 Carrier Slickwall- 4.00" x 1', G130 MaterialCSW-40G130-024 Carrier Slickwall- 4.00" x 2', G130 MaterialCSW-40G130-030 Carrier Slickwall- 4.00" x 2.5', G130 MaterialCSW-40G130-036 Carrier Slickwall- 4.00" x 3', G130 MaterialCSW-40G130-048 Carrier Slickwall- 4.00" x 4', G130 MaterialCSW-40G130-060 Carrier Slickwall- 4.00" x 5', G130 MaterialCSW-40G130-072 Carrier Slickwall- 4.00" x 6', G130 MaterialCSW-40G130-084 Carrier Slickwall- 4.00" x 7', G130 MaterialCSW-40G130-108 Carrier Slickwall- 4.00" x 9', G130 MaterialCSW-40G130-120 Carrier Slickwall- 4.00" x 10', G130 MaterialCSW-40G130-132 Carrier Slickwall- 4.00" x 11', G130 MaterialCSW-40G130-144 Carrier Slickwall- 4.00" x 12', G130 MaterialCSW-40G130-156 Carrier Slickwall- 4.00" x 13', G130 MaterialCSW-40G130-168 Carrier Slickwall- 4.00" x 14', G130 MaterialCSW-40G130-180 Carrier Slickwall- 4.00" x 15', G130 MaterialCSW-40G130-192 Carrier Slickwall- 4.00" x 16', G130 MaterialCSW-40G130-204 Carrier Slickwall- 4.00" x 17', G130 MaterialCSW-40G130-216 Carrier Slickwall- 4.00" x 18', G130 MaterialCSW-40G130-228 Carrier Slickwall- 4.00" x 19', G130 MaterialCSW-40G130-240 Carrier Slickwall- 4.00" x 20', G130 MaterialCSW-40G130-252 Carrier Slickwall- 4.00" x 21', G130 Material
4” X42 Material
CSW-40X42-024 Carrier Slickwall- 4in x 2', X42 Material, 6000 psiCSW-40X42-036 Carrier Slickwall- 4in x 3', X42 Material, 6000 psiCSW-40X42-048 Carrier Slickwall- 4in x 4', X42 Material, 6000 psiCSW-40X42-060 Carrier Slickwall- 4in x 5', X42 Material, 6000 psiCSW-40X42-084 Carrier Slickwall- 4in x 7', X42 Material, 6000 psiCSW-40X42-108 Carrier Slickwall- 4in x 9', X42 Material, 6000 psiCSW-40X42-132 Carrier Slickwall- 4in x 11', X42 Material, 6000 psiCSW-40X42-156 Carrier Slickwall- 4in x 13', X42 Material, 6000 psiCSW-40X42-180 Carrier Slickwall- 4in x 15', X42 Material, 6000 psiCSW-40X42-192 Carrier Slickwall- 4in x 16', X42 Material, 6000 psiCSW-40X42-204 Carrier Slickwall- 4in x 17', X42 Material, 6000 psiCSW-40X42-228 Carrier Slickwall- 4in x 19', X42 Material, 6000 psiCSW-40X42-252 Carrier Slickwall- 4in x 21', X42 Material, 6000 psi
SLICKWALL CARRIERS, cont.O.D. Part Number Description
4-1/2” G130
CSW-45G130-012 Carrier Slickwall- 4-1/2" x 1', G130 MaterialCSW-45G130-015 Carrier Slickwall- 4-1/2" x 1.25', G130 MaterialCSW-45G130-024 Carrier Slickwall, 4-1/2" x 2', G130 MaterialCSW-45G130-036 Carrier Slickwall, 4-1/2" x 3', G130 MaterialCSW-45G130-132 Carrier Slickwall- 4-1/2" x 11', G130 MaterialCSW-45G130-252 Carrier Slickwall- 4-1/2" x 21', G130 Material
4-5/8” G130
CSW-46G130-012 Carrier Slickwall- 4-5/8" x 1', G130 MaterialCSW-46G130-024 Carrier Slickwall- 4-5/8" x 2', G130 MaterialCSW-46G130-030 Carrier Slickwall- 4-5/8" x 2.5', G130 MaterialCSW-46G130-036 Carrier Slickwall- 4-5/8" x 3', G130 MaterialCSW-46G130-048 Carrier Slickwall- 4-5/8" x 4', G130 MaterialCSW-46G130-060 Carrier Slickwall- 4-5/8" x 5', G130 MaterialCSW-46G130-084 Carrier Slickwall- 4-5/8" x 7', G130 MaterialCSW-46G130-108 Carrier Slickwall- 4-5/8" x 9', G130 MaterialCSW-46G130-120 Carrier Slickwall- 4-5/8" x 10', G130 MaterialCSW-46G130-132 Carrier Slickwall- 4-5/8" x 11', G130 MaterialCSW-46G130-144 Carrier Slickwall- 4-5/8" x 12', G130 MaterialCSW-46G130-156 Carrier Slickwall- 4-5/8" x 13', G130 MaterialCSW-46G130-180 Carrier Slickwall- 4-5/8" x 15', G130 MaterialCSW-46G130-192 Carrier Slickwall- 4-5/8" x 16', G130 MaterialCSW-46G130-204 Carrier Slickwall- 4-5/8" x 17', G130 MaterialCSW-46G130-216 Carrier Slickwall- 4-5/8" x 18', G130 MaterialCSW-46G130-228 Carrier Slickwall- 4-5/8" x 19', G130 MaterialCSW-46G130-240 Carrier Slickwall- 4-5/8" x 20', G130 MaterialCSW-46G130-252 Carrier Slickwall- 4-5/8" x 21', G130 Material
Page 202 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 203 Revised: July 24, 2020 1:30 PM
Direct Connection Crossovers Top Gun Connector
GEODynamics’ direct connect crossovers provide reliable and efficient connections directly to STRATX™ and VaporGun™ perforating systems. The top connector shoulders up to industry-standard casing collar locators (CCL) or GEODynamics wireline release tool, and makes up to the standard STRATX or VaporGun tandem sub at the top gun.
Direct connection toP connector
GN-QC31-GIC31
DiSPoSable tanDem with converSion inSert
GN-r31-T086-A
TANDEm ShOwN fOr rEfErENCE ONly
ASSEmblED vIEw
Mechanical SpecificationsGun Size
(OD) Makeup Length Part Number Upper O-Rings Internal O-Ring Uphole Thread Downhole Thread
2-3/4” 5.98 in/15.19 cm GN-QC27-GIC27 OR-N569-222 OR-N569-210 1-5/8” 6P ACME Pin 2-3/8” 8P ACME Box3-1/8” 5.98 in/15.19 cm GN-QC31-GIC31 OR-N569-222 OR-N569-210 1-5/8” 6P ACME Pin 2-3/4” 6P ACME Box3-3/8” 5.98 in/15.19 cm GN-QC33-GIC33 OR-N569-222 OR-N569-210 1-5/8” 6P ACME Pin 2-13/16” 6P ACME Box
Environmental Specifications Maximum Pressure 20,000 psi 1378.95 bar
Maximum Temperature 350°F 177°CMaximum Tensile Force 50,000 lbs 224.41 kN
Electrical Specifications Maximum Voltage (QC) 500VDCMaximum Current (QC) 3A
Rebuild KitsQuick Rebuild* RKI-GN-QC31-0001
Complete Rebuild* RKC-GN-QC31-0001*Rebuild Kit BOM lists on next page
Page 204 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Item Part Number Description QTY1 EM-EC-3357 Washer, Insulating, Top, QC Assembly 12 EM-EN-3354 Insulator, Sliding Contact 13 EM-EN-500x375x50 TT Teflon Tubing, 3/8 ID X 1/2 OD 14 OR-N569-210 O-Ring, #210 Nitrile 15 EM-EN-035-02684-0003 Washer, Insulating, QC Assembly 16 OR-HN90-114 O-Ring, HNBR #114, 90 Durometer 17 EM-QC31-0022* Short QC Bottom Insulating Retainer 1
*EM-EC-REMOVAL TOOL is required to install EM-QC31-0022
Direct Connection CrossoversTop Gun Connector Rebuild Kits
Item Part Number Description QTY1 EM-EC-3356 Contact, Plunger, QC Assembly 12 EM-EC-3354 Barrel, Sliding Contact, QC Assembly 13 EM-EC-3355 Washer, Contact, Sliding, QC Assembly 14 EM-EC-3357 Washer, Insulating, Top, QC Assembly 15 HD-SPG-296X224X2_63 Spring, Compression, QC Assembly, Upper 16 EM-EN-3354 Insulator, Sliding Contact 17 EM-QC-QC275-00GO-0020 Set Screw, Modified, QC Assembly 18 EM-EN-500x375x50 TT Teflon Tubing, 3/8 ID X 1/2 OD 19 GN-QC27-0033 Contact Rod, 3-1/4 Short QC V2 1
10 OR-N569-210 O-Ring, #210 Nitrile 111 EM-EN-035-02684-0003 Washer, Insulating, QC Assembly 112 OR-HN90-114 O-Ring, HNBR #114, 90 Durometer 113 HD-SHCS-832X375SS Screw, SKT. HD. CAP, 8-32 x 3/8 Stainless Steel McMaster 92196A192 114 EM-QC31-0022* Short QC Bottom Insulating Retainer 115 EM-032-0040 Contact, Sliding Contact V2 116 HD-SPG-296X236X031WD Spring, Compression, .296 OD x .236 ID x .031 WD x .88 length, Century Spring # GG-2 SS 1
*EM-EC-REMOVAL TOOL is required to install the Short QC Bottom Insulating Retainer (EM-QC31-0022)
1
4 5 7 9
2 3 6 810 11
12 1316
14
15
RKC-GN-QC31-0001, Complete Rebuild Kit
54
3
21
67
RKI-GN-QC31-0001, Quick Rebuild Kit
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 205 Revised: July 24, 2020 1:30 PM
Gun System Thread Protectors
Thread protectors with handles facilitate easy and safe handling of assembled gun systems, carriers, tandems, and bull plugs.
Double o-rings provide a reliable moisture seal. The melt plug is equipped with an o-ring and sealed in place with silicone. When the melt plug or its o-ring becomes damaged, GEODynamics recommends replacement of the entire melt plug.
Thread protectors are not for lifting and rigging; lift subs are required for these operations.
System Size
Carrier (Gun) Protector
Top Sub (Top Pin) Protector
Tandem/Switch Sub and Bull Plug
ProtectorO-Ring (Two per
Sub (Pin End)) Melt Plug
1-9/16” GN-THD-156-000 GN-THD-156-020 GN-THD-156-020 OR-N569-215 GN-THD-000-020
1-3/4” GN-THD-175-000 GN-THD-156-020 GN-THD-175-020 OR-N569-218 GN-THD-000-020
2” GN-THD-200-000 GN-THD-156-020 GN-THD-200-020 OR-N569-221 GN-THD-000-020
2-3/8” GN-THD-239-030 GN-THD-156-020 GN-THD-239-040 OR-N569-225 GN-THD-000-028
2-1/2” GN-THD-250-030 GN-THD-156-020 GN-THD-250-040 OR-N569-225 GN-THD-000-028
2-3/4” GN-THD-275-030 GN-THD-QC27-020 GN-THD-275-040 OR-N569-227 GN-THD-000-028
2-7/8” GN-THD-288-030 GN-THD-QC27-020 GN-THD-288-040 OR-N569-228 GN-THD-000-028
3-1/8” GN-THD-312-030 GN-THD-312-020 GN-THD-312-040 OR-N569-230 GN-THD-000-028
3-3/8” GN-THD-338-030 GN-THD-312-020 GN-THD-338-040 OR-N569-231 GN-THD-000-028
4” GN-THD-400-030 GN-THD-312-020 GN-THD-400-040 OR-N569-236 GN-THD-000-028
4-1/2” GN-THD-450-030 GN-THD-312-020 GN-THD-450-040 OR-N569-342 GN-THD-000-028
4-5/8” GN-THD-450-030 GN-THD-312-020 GN-THD-450-040 OR-N569-342 GN-THD-000-028
5” GN-THD-512-030 GN-THD-312-020 GN-THD-512-040 OR-N569-346 GN-THD-000-028
5-1/8” GN-THD-512-030 GN-THD-312-020 GN-THD-512-040 OR-N569-346 GN-THD-000-028
7” GN-THD-700-030 GN-THD-312-020 GN-THD-700-040 OR-N569-360 GN-THD-000-028
HANDLING PROTECTORS ONLY NOT FOR LIFTING
toP Sub (toP Pin), tanDem/Switch Sub, anD bull Plug Protector
EQuIppED wITh mElT pluG
melt Plug w/o-ring
GN-ThD-000-028 SIzES 2-3/8” - 7”
INCluDES 70-DurO #120 O-rING
melt Plug GN-ThD-000-020 SIzES 1-9/16” - 2”
carrier (gun) Protector
EQuIppED wITh mElT pluG AND O-rINGS
THREAD PROTECTORS, O-RINGS, and MELT PLUGS
Page 206 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 207 Revised: July 24, 2020 1:30 PM
Wireline Release ToolsRelease™ and ReleaseT™
GEODynamics wireline release tool technologies provide a reliable option for freeing from a downhole tool string that has unexpectedly become stuck. During normal perforating operations, a solid state switch automatically connects the wireline to the tool/gun string when the voltage rises above 35V, regardless of polarity. This allows the surface to communicate with the release tool in isolation from the rest of the string when powered up to less than 35V. The tools are available in two versions:
● Release™ supports release functionality only. ● ReleaseT™ combines release functionality with monitoring of cable head tension, wellbore pressure, and wellbore temperature,
all within one tool.
The release tool is commonly run below the rope socket and the CCL. In the unfortunate event that it must be used, the tool is activated with state-of-the-art addressable technology administered from the GEODynamics EPIC™ Command or Warrior® Tool Interface Panel and Probe® Shooting Panel. After the release command is executed, the tool separates at the engineered release point, allowing the wireline string to be pulled to surface.
A second release tool can be run between the perforating string and the setting tool. If the tool string becomes stuck before perforating, this configuration allows release and retrieval of the perforating string and all components above it.
After a successful release, the tool must be exchanged at GEODynamics for redress and recertification.
Environmental Specifications Maximum Pressure 20,000 psi 1378.95 bar
Maximum Temperature 350°F 176.67°CMaximum Tensile Force 50,000 lbs 224.41 kN
Electrical Specifications Maximum Voltage 600VDCOperating Voltage ± 25 VDC
Passthrough Voltage ± 35 VDC
Release Mechanical SpecificationsOutside Diameter 2.75 in 6.99 cm
Makeup Length 26.39 in 67.03 cmWeight 35.65 lbs 16.17 kg
Service Interval 100 runsPart Number WRT-RCV1-0001
COMPATIBILITYSwitches Compatible with GEODynamics EPIC™ System and most industry standard pressure switches.
When using third party addressables, confirm compatibility prior to tool operations.Gun Sizes 1-11/16” through 4-5/8”Upper Connection 1-5/8” 6 ACME Pin (field replaceable top sub available with 1-3/16” 12 GO Box)Lower Connection 1-5/8” 6 ACME Box (additional lower threads available: 1-3/16” 12 GO Pin)Required Equipment GEODynamics EPIC™ Command or Probe® Shooting Panel and Warrior® Interface Panel (Version 8.0)Swivel Sub WRT-RCV1-S001 (available upon request)Warrior® is a registered trademark of Scientific Data Systems, Inc.Probe® is a registered trademark of Probe Technologies Holdings, Inc.
ReleaseT Mechanical SpecificationsOutside Diameter 2.75 in 6.99 cmMakeup Length* 34.25 in 87.00 cm
Weight 47.20 lbs 21.41 kgService Interval 100 runs
Part Number WRT-RCV2-0001Makeup length includes a small gap engineered for tension measurement.
Page 208 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 209 Revised: July 24, 2020 1:30 PM
EPIC™ SystemsEPIC™ Command
GEODynamics’ EPIC™ Command shooting panel interfaces between the wireline and a logging system to deliver state-of-the-art efficiency in perforating operations.
Seamless integration with GEODynamics’ EPIC switches and the EPIC Test box makes for a feature-rich plug-and-perf shooting panel for today’s high speed, multi-well, zipper frac completion techniques. Command’s advanced electronic telemetry makes for trouble-free conveyance and POOH, while shooting on the fly is a breeze.
Depending upon the switch configuration, the EPIC Command shooting panel can inventory the string at a rate of up to 5 switches per second, reducing risk in shooting-on-the-fly operations.
BENEFITS ● Clean, intuitive, touch-screen user interface ● Drop-in replacement for existing panels ● Shot power controlled via button fire sequence ● Panel delivers only enough power to initiate the ignitor or detonator,
then ends the shot to minimize abuse on wireline and collector rings ● No separate panel required for CCL hosting or check-fire functions
SPECIFICATIONS ● Firing voltage up to 350V, software limited to 2A maximum ● Variable Correlation Voltage (Switch Mode vs. WRT Mode) ● Correlation current hardware limited to 125mA ● Safe Key termination per RP-67 ● 2ru rackmount height ● Compatible with GEODynamics EPIC™ Switches and wireline release tools
FEATURES ● Shot plot display on panel for real-time review; shot plot data stored for future review ● All switch interactions stored in an easily readable text file with simple USB download ● Auto-adjust telemetry requires no user intervention; successfully tested on over 35k’ greaseless wireline ● CCL hosting capabilities for on-panel display, audible CCL alarm, and output to logging system ● LOG and AUX line routing to host non-ballistic services ● Check-fire capabilities
EM-ASSP-0001
Page 210 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
EPIC™ SystemsEPIC™ Command
FUNCTIONAL OVERVIEWARM Used with the FIRE button to enable shooting power supply.
CCL GAIN & VOLUME Adjust CCL gain and signal volume when key is in CCL mode.
KEY POSITION(Operating Modes)
AUX Signal feedthrough via the AUX jack on back. Typical connection to another wireline panel.LOG Signal feedthrough via the LOG connection on back.SAFE No power on the line; line is terminated per RP-67. Safe key is removable.CCL Displays the virtual CCL meter. Signal is routed through the rear CCL port to CCL logging system.
ARM Enables inventory, arming, and shooting functions.TOUCH SCREEN Input commands and view system/function responses.
USB Download job-specific data files or perform panel software update.POWER SWITCH Controls both AC and DC power.
FIRE Used along with the ARM button to enable shooting power supply.
REAR INPUTS and OUTPUTS AC INPUTS 120VAC input (5A, 3AG fused)DC INPUTS 12V truck battery input (2A, 3AG fused)
LIGHTS 2A, 3AG fuse for safe light circuitCCL CCL output to logging system
LIGHTS Standard output to truck safe lightsAUX ¼” phone connection; LINE is routed here when key is in AUX positionLOG PL-259 connection; LINE is routed here when key is in LOG positionLINE Wireline connection
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 211 Revised: July 24, 2020 1:30 PM
EPIC™ SystemsEPIC™ Test
GEODynamics’ EPIC™ Test delivers an all-in-one testing, diagnostics, and configuration solution for perforating toolstrings equipped with EPIC™ Switch technologies. The test box acknowledges the presence of switches and detonators, facilitates pre-run validation and switch configuration, and reports any problems detected.
BENEFITS ● Clean, intuitive, touch-screen user interface ● Test traceability from the gun shop to the wellsite ● No offline downtime for battery charging ● Battery status indicator displayed on every screen
SPECIFICATIONS ● Facilitates switch string interrogation and switch configuration ● Redundant current limit on interrogation supply ● RP-67 compliant; certified per Franklin Applied Physics ● Powered by a single rechargeable battery (spare battery included) ● Communicates with all GEODynamics EPIC™ Switches and wireline release tools
FEATURES ● Allows switch configuration to operate as a Set/Fire or BRT switch ● Real-time indication of detonator/ignitor presence on surface ● All switch interactions stored in an easily readable text file with simple USB download ● Rugged and water-resistant for field operational environments ● Automatic sleep/shutdown after idle periods to minimize battery consumption ● Easy replacement of rechargeable battery for minimal downtime ● Magnet supplied for easy ground connection
EM-ASTB-0001-0000
Page 212 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 213 Revised: July 24, 2020 1:30 PM
EPIC™ SystemsEPIC™ Switches
GEODynamics’ EPIC™ Switches offer the industry’s only digital switches capable of being field configurable to rapid firing mode, allowing them to function more like a pressure switch while preserving the safety and intelligence of an addressable system. In addition to unparalleled flexibility in the electronics, the technology offers two designs for deployment:
● EPIC™ Switch in a Can—The three (3) wired pressure-bulkhead housing facilitates standard installation in a switch sub with no pass-through bulkhead required, reducing points of failure.
● EPIC™ Flying Leads—The five (5) wired switch facilitates compatibility with standard pass-through bulkheads and non-ported subs.
On surface, the EPIC™ Test box is used to inventory the perforating string. The inventory process is repeatable while running in hole as a verification of viable switches.
COMMON FEATURES
ADDRESSABLE FIRING MODE RAPID FIRING MODE (Field Configurable)Capabilities ● Intrinsically safe
● Shoot on the fly ● Dual fire (switch types: normal or Set/Fire) ● Viable switch count before each shot—checks con-
nections to detonator, feed-through, and ground ● Reassign address on surface without disassembly ● Skip gun capability (skip a problematic gun and
prevent non-productive time (NPT))
● Intrinsically safe ● Shoot on the fly ● Dual fire (switch types: normal or Set/Fire) ● Viable switch count before each shot—checks con-
nections to detonator, feed-through, and ground ● No software requirement ● Inventory and arm bottom-most circuit with one
touchInventory Rates One (1) switch per second Five (5) switches per second
Performance Stable communications protocol capable on over 34,000ft (10,363m) of 0.288in (0.7315cm) greaseless line cable Set/Fire Efficiency Plug set and fire first gun from a single switch (dual fire capability)
Safety ● Independent Third Party Organization (ITPO) certified RF Safe, ESD Safe, and API RP-67 compliant ● All wired connections, including detonator, safely tested with the EPIC™ Test box
Quality Fully tested post-manufacturing; Quality Assured to ISO:9001:2015
el1-al-1000ePic™ flying leaDS
el1-aS-2000ePic™ Switch in a can
COMPATIBILITYRelease Tools Compatible with GEODynamics Release™ and ReleaseT™, Canatex® BRT, and ICSI® BRT.
Additionally, the 5-wire switch is compatible with the Hunting® release tool. Required
Equipment GEODynamics EPIC™ Command Shooting Panel
Canatex® is a registerred trademark of Canatex Completions Solutions, Inc.ICSI® is a registered trademark of Innovative Completion Systems, Inc.Hunting® is a registered trademark of Hunting PLC
Page 214 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
EPIC™ SystemsEPIC™ Switches
Accessories Part Number113 O-Ring, 75 Durometer Viton (included and installed on bulkhead switch) OR-V75G-113
UY2 Scotchlok Connector (recommended) AP-M-26224UY Scotchlok Connector (may be substituted for the above UY2, but use on switch wires only) AP-M-26214
RETAINER NUTS
Color FunctionWHITE THROUGH WIRE TO UPPER GUNBLACK GROUND WIRE (ALWAYS DOUBLE-GROUND)GREEN NEGATIVE (FIRE) DETONATOR/IGNITER WIRE
CASE CASE IS GROUNDED INTERNALLY
EPIC™ Switch in a Can Pressure Bulkhead, 3-WiresRNS-GEP
Retainer Nut, StraightFor shot densities greater than 4 SPF
NOT for use with Zero Tension Connectors
RNTD-GEPRetainer Nut, Tapered Cone
For double diode switches greater than 4spf
RNTC-ZT1Retainer Nut, Zero Tension Connector
Required for all carriers withzero-tension connectors
CONNECTIONS
Color FunctionWHITE THROUGH WIRE TO UPPER GUNBLACK GROUND WIRE (ALWAYS DOUBLE-GROUND)BLUE PASS-THROUGH WIRE TO LOWER GUNRED DETONATOR WIRE
GREEN DETONATOR WIRE
EPIC™ Flying Leads, 5-Wires
Mechanical SpecificationsBulkhead Switch OD 0.75 in 1.91 cm
Bulkhead Housing Length 2.00 in 5.08 cmBulkhead Pin Length 0.58 in 1.47 cm
5-Wire Switch Dimensions 2-1/4” x 5/8” x 1/4”
Electrical Specifications Firing Voltage Polarity Negative
Operating Voltage -20 VDC to -70 VDCDump Fire Voltage > -140 VDC
Operating Temperature Range -70°F to 350°F
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 215 Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsCableheads
O.D. Part Number Description5/8” AEL-CHD0001-5/16” Cablehead, 5/8in (5/16in Line)
11/16” AEL-CHD1001-5/16” Cablehead, 11/16in (5/16in Line)
3/4”AEL-CHD2001-7/32” Cablehead, 3/4, (7/32 Line)AEL-CHD2001-9/32” Cablehead, 3/4, (9/32 Line)
1”AEL-CHD3001-5/16" Cablehead 1in X 5/16inAEL-CHD3001-7/32" Cablehead, 1in (7/32in Line)AEL-CHD3001-9/32 Cablehead, 1in (9/32in Line)
1-3/8”AEL-CHD4001-3/8” Cablehead, 1-3/8in
AEL-CHD4001-9/32” Cablehead, 1-3/8in, GO (9/32in Line)
1-7/16”
AEL-CHD5001-1/4” Cablehead 1-7/16in, GO (1/4in Line)AEL-CHD5001-3/8" Cablehead 1-7/16in GO Style x 3/8in
AEL-CHD5001-5/16" Cablehead 1-7/16in GO Style x 5/16inAEL-CHD5001-7/32" Cablehead 1-7/16in GO Style x 7/32inAEL-CHD5001-9/32" Cablehead 1-7/16in GO Style x 9/32in
CABLEHEADS
Cableheads are used to create a mechanical and electrical connection between the wireline and tool string. The cablehead is also intended to be the weak link if the tool string become stuck within the wellbore. The wireline will pull out of the cablehead when the set force is applied.
SPECIFICATIONSTemperature Rating 500°FPressure Rating 20,000 psiDiameter Range 3/4” to 1-11/16”Tool Length VariesType “GO” Brass Cone and Washer and Clamp RingFishnecks 1” O.D and 1-3/8” O.D.Connections Gearhart “GO”
Please contact your sales representative for redress kits and pricing.
Page 216 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsCollar Locators (CCL)
O.D. Part Number Description5/8” AEL-CCL0001 CCL, 5/8in
11/16” AEL-CCL1001 CCL, 11/16in (Non-Grounded)3/4” AEL-CCL2001 CCL, 3/4in
1”AEL-CCL3001 CCL, 1in, GO StyleAEL-CCL3002 CCL, 1in, Non-Grounded
1-3/8”AEL-CCL4001 CCL, 1-3/8in, GroundedAEL-CCL4002 CCL, 1-3/8in, Non-Grounded
1-7/16” AEL-CCL5001 CCL, 1-7/16in, GO Style
1-11/16”AEL-CCL6002 CCL, 1-11/16in, GO StyleAEL-CCL6003 CCL, 1-11/16in, Grounded
1-5/8” AEL-CCL6006 CCL, 1-5/8in, (Non-Grounded)2-1/8” AEL-CCL-7002 CCL, 2-1/8", (Grounded)2-3/4” AEL-CCL8001 CCL, 2-3/4" (Grounded)3-1/4” AEL-CCL9001 CCL, 3-1/4in, GO Style (GO Box Top-QC Box Btm)
3-1/8”AEL-CCL9002 CCL, 3-1/8in, GO Style (GO Box Top-QC Box Btm)AEL-CCL9004 CCL, 3-1/8in, with Fishneck (Grounded)AEL-CCL9006 CCL, 3-1/8in, with Baker Fishneck
COLLAR LOCATORS (CCL)
Collar locators are based on the principle that changing magnetic flux within the instruments sensor coil generates voltage across the terminals of that sensor coil. A collar or joint in the tubing changes the magnetic flux field including the flux passing through the sensor coil ends adjacent to the magnets, causing a signal to be generated at surface.
SPECIFICATIONSTemperature Rating 500°FPressure Rating 20,000 psiDiameter Range 5/8” to 3-1/8”Tool Length VariesType Grounded (Shooting) and Non-Grounded (Free Point)Connections Gearhart “GO”
Please contact your sales representative for redress kits and pricing.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 217 Revised: July 24, 2020 1:30 PM
Advanced E-Line Solutions Sinker Bars
O.D. Part Number Description5/8” AEL-SBS0002 Sinker Bar, Steel 5/8in x 3'3/4” AEL-SBS2001 Sinker Bar, Steel 3/4in x 5'
1”
AEL-SBS3001 Sinker Bar, Steel 1in x 5'AEL-SBS-3003 Sinker Bar Steel 1in x 3'AEL-SBS3002 Sinker Bar Steel, 1in x 7'AEL-SBT3001 Sinker Bar, Tungsten, 1in x 5'
1-3/8” AEL-SBS4002 Sinker Bar, 1-3/8in x 7'
1-7/16”
AEL-SBL5001 Sinker Bar, Lead 1-7/16in x 5'AEL-SBL5002 Sinker Bar, Lead 1-7/16in x 7'AEL-SBS5001 Sinker Bar, Steel 1-7/16in x 5'AEL-SBS5002 Sinker Bar, Steel 1-7/16in x 7'AEL-SBT5002 Sinker Bar, Tungsten, 1-7/16in x 7'
1-1/2” AEL-SBS5003 Sinker Bar, Steel 1-1/2in x 5' with 5/8in Sucker Rod
1-11/16”
AEL-SBL6001 Sinker Bar, Lead 1-11/16in x 5'AEL-SBL6002 Sinker Bar, Lead 1-11/16in x 7'AEL-SBS6001 Sinker Bar, Steel 1-11/16in x 5'AEL-SBS6002 Sinker Bar, Steel 1-11/16in x 7'AEL-SBT6002 Sinker Bar, Tungsten, 1-11/16in x 7'
2” AEL-SBL9001 Sinker Bar, Lead 2in x 5'AEL-SBL9002 Sinker Bar, Lead 2in x 7'
2-3/4” AEL-SBS9003 Sinker Bar, Steel, 2-3/4in x 7', OTLAEL-SBT9004 Sinker Bar, Tungsten, 2-3/4in x 7' (Over the line FN THDS), Wt. 280 Lbs
SINKER BARS
Sinker bars, sometimes referred to as “weight bars”, are designed to run above your tool string to overcome forces created by well pressure within the wellbore. Sinker bars are available in various diameters and lengths and are supplied with industry-standard box/pin connections.
SPECIFICATIONSTemperature Rating 500°FPressure Rating 20,000 psiDiameter Range 5/8” to 2-3/4”Tool Length 3’, 5’, and 7’Type Steel, Lead, and TungstenConnections Gearhart “GO”, Sucker Rod, and Quick Change “GO”
Please contact your sales representative for additional sizes
and connections.
Page 218 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsAdaptors
Adaptors are used for various applications in the field. The most common applications are to:
● Adapt to different types and sizes of connections. ● Connect perforating tools to the rest of the tool string.
SPECIFICATIONSTemperature Rating 500°FPressure Rating 20,000 psiDiameter Range 5/8” to 3-1/8”Tool Length VariesType Crossover Subs, Teardrops, Firing Heads, Quick ChangesConnections Gearhart “GO”, Schlumberger, Baker Sucker Rod, and Quick Change “GO”
Please contact your sales representative for
redress kits and pricing.
Part Number DescriptionAEL-ADA-150005 Insulator, ButtonAEL-ADA-312001 Quick Change BellAEL-ADA-325003 Detonator Block for GO Style Quick ChangeAEL-ADA-325014 3-1/4in CCL Top Sub for 2in Fishing NeckAEL-ADA-325015 Bull Plug (for QC Box)
AEL-ADA0001 Tear Drop 5/8in ODAEL-ADA0002 Shot Rod HangerAEL-ADA0003 Shot Rod Bull Plug, 5/8inAEL-ADA0007 5/8in Pin x 1in GO BoxAEL-ADA0010 5/8in Double Pin
AEL-ADA10001 Baker #20 QC/Baker IGNAEL-ADA10002 Baker #10 / GO Quick ChangeAEL-ADA10003 Baker #10 / GO Quick Change (Halb. Ign.)AEL-ADA10004 Baker #20 / GO Quick ChangeAEL-ADA10005 Baker #20 / GO Quick Change (Halb. Ign.)AEL-ADA10006 Baker #20 / GO Quick Change (with contacts)AEL-ADA10007 Baker #10 / GO Quick Change (with contacts)AEL-ADA2002 Tear Drop, 3/4inAEL-ADA2003 3/4in Shot Rod HangerAEL-ADA2004 3/4in Double GO BoxAEL-ADA2013 Shot Rod Bull Plug, 3/4inAEL-ADA3001 1in GO Tear Drop
ADAPTORS
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 219 Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsAdaptors
Part Number DescriptionAEL-ADA3002 Shot Rod Hanger, 1inAEL-ADA3003 1in Double GO PinAEL-ADA3004 FPT Bull Plug, 1inAEL-ADA3005 Button Sub,1inAEL-ADA3006 1in Double GO BoxAEL-ADA3011 Shot Rod Bull Plug, 1inAEL-ADA3016 Box, 1in / Pin, 3/4inAEL-ADA3017 Pin, 1in / Pin, 3/4inAEL-ADA3021 Shot Rod Assembly, 1in x 5'AEL-ADA3024 Double Sealed Tear Drop, 1inAEL-ADA4001 Tear Drop x GO Pin, 1-3/8inAEL-ADA4002 Shot Rod Hanger 1-3/8in
AEL-ADA4003S Double Pin, 1-3/8inAEL-ADA4005 Bull Plug Box, 1-3/8inAEL-ADA4006 Bull Plug Pin, 1-3/8inAEL-ADA4007 1-3/8in Schlumberger Box GO PinAEL-ADA4011 Freepoint Bull Plug, 1-3/8inAEL-ADA4015 SR Pin, 5/8in X GO Box, 1-3/8inAEL-ADA4016 SR Box 5/8in X GO Pin, 1-3/8inAEL-ADA4037 Shot Rod Assembly CompleteAEL-ADA4038 Sucker Rod Box 3/4in - GO Pin, 1-3/8inAEL-ADA4039 SR Pin, 3/4in / GO Box, 1-3/8inAEL-ADA4041 Shot Rod Bull Plug, 1-3/8inAEL-ADA4042 GO Box, 1-3/8in x GO Pin, 1inAEL-ADA4043 GO Box, 1in x GO Pin, 1-3/8inAEL-ADA5001 GO Box 1in / 1-7/16in GO PinAEL-ADA5002 GO Pin 1in / 1-7/16in GO BoxAEL-ADA5003 Tear Drop / GO Pin 1-7/16in, Long
AEL-ADA5003S Tear Drop / GO Pin 1-7/16in, ShortAEL-ADA5004-HV Tear Drop / GO Pin 1-7/16in High Voltage Contact
AEL-ADA5005 Double GO Pin 1-7/16inAEL-ADA5005S Double GO Pin 1-7/16in ShortAEL-ADA5006 Double GO Box 1-7/16in
ADAPTORS, cont.Part Number DescriptionAEL-ADA5007 Sealed Tear Drop / GO Pin 1-7/16in
AEL-ADA5007S Double Sealed Tear Drop / GO Pin 1-7/16in (short)AEL-ADA5008 GO Box / Tear Drop Pin 1-7/16inAEL-ADA5009 GO Pin / Sealed Tear Drop 1-7/16inAEL-ADA5010 Double GO Pin 1-7/16in (with phasing ring)AEL-ADA5011 GO Tear Drop Sub 1-7/16in (with phasing ring)AEL-ADA5012 GO Sealed Tear Drop / GO Box 1-7/16inAEL-ADA6001 Schlumberger Box 1-11/16in / GO PinAEL-ADA6002 1-11/16" Double Sealed Tear Drop, Go PinAEL-ADA6003 Schlumberger Pin 1-11/16in / GO Pin
AEL-ADA6006S Teardrop Pin / GO Pin, 1-11/16inAEL-ADA6007 RTG Tandem 1-9/16inAEL-ADA6008 RTG Top Sub 1-9/16inAEL-ADA6009 RTG Blast Sub 1-9/16inAEL-ADA6010 RTG Bull Plug 1-9/16inAEL-ADA6011 RTG Lower Decentralizer Adapter 1-9/16inAEL-ADA6013 GO Box Double, 1-11/16inAEL-ADA6015 GO Pin Double, 1-11/16inAEL-ADA6024 Shot Rod Assembly, 1-5/8in x 5'AEL-ADA6030 Shot Rod Hanger, 1-5/8inAEL-ADA6100 Tag Shooting Sub, 1-11/16inAEL-ADA7004 QC Pin GO 3-1/4in, GO Pin 1-7/16inAEL-ADA7010 QC Box / GO Box, 2-1/2inAEL-ADA8001 Button Firing Sub 1-1/2inAEL-ADA8004 Button Firing Sub 1-1/2in (high pressure)AEL-ADA9001 Quick Change GO Style 3-1/4in OD Less Det Blk
AEL-ADA9001-DB Quick Change GO Style 3-1/4in or 3-1/8in OD With Det BlkAEL-ADA9004 Quick Change GO Style 3-1/8in OD Less Det Blk
AEL-ADA9004-DB Quick Change GO, 3-1/8in (with detonator block)AEL-ADA9007 Top Sub, 2-3/4in (Over the line, 2/3/8in FN)
AEL-ADA9007-2 Top Sub, 2-3/4in (Over the line, 2in FN)AEL-ADA9008 2in Fishing Neck for 3-1/8in or 3-1/4in CCLAEL-ADA9009 Fish Neck Pin/Box, 2-3/4in
Page 220 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsCentralizers and De-Centralizers
Centralizers are used within the tool string to keep the tools centralized within the tubing. They are manufactured with either bow springs or roller arms. Centralizers with roller arms are used in deviated wells to help guide the tool string down hole without any hang-ups.
De-centralizers are used within the tool string to keep the tools de-centralized against casing wall. They usually run in conjunction with perforating guns (orient the guns to a specific side of the casing) or with neutron logging (to keep the radioactive source against the casing wall).
SPECIFICATIONS CENTRALIZERS DE-CENTRALIZERSTemperature Rating 500°F 500°FPressure Rating 20,000 psi 20,000 psiDiameter Range 1-7/16” to 2-3/4” 1-3/8” to 2”I.D. Range 1-5/8” to 22” N/ATool Length Varies VariesType Bowspring and Roller Arm Channel or Button MagnetsConnections Gearhart “GO” and Quick Change “GO” Gearhart “GO” and RTG (bolt-together type)
Part Number DescriptionAEL-CEN5002-6 1 7/16in Centralizer, 3 Blades w/ 6in SpringsAEL-CEN6001-6 1-11/16in Centralizer, 6in SpringsAEL-CEN9001 2-3/4" Centralizer (Spring Type)
CENTRALIZERS
Part Number DescriptionAEL-DEC4001 Decentralizer 1-3/8in GO Pin Phase RNG (Channel Magnet)AEL-DEC6001 Decentralizer 1-11/16in GO Pin Phase RNG (Channel Magnet)AEL-DEC6002 Decentralizer 1-9/16in RTG (Channel Magnet)AEL-DEC6003 Decentralizer 1-11/16in RTG (Channel Magnet)AEL-DEC6004 Decentralizer 1-9/16in GO (Channel Magnet)AEL-DEC9001 Decentralizer 2-1/8in GO (Channel Magnet)AEL-DEC9002 Decentralizer 2in RTG (Channel Magnet)
DE-CENTRALIZERS
Please contact your sales representative for redress kits and pricing.
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 221 Revised: July 24, 2020 1:30 PM
Advanced E-Line SolutionsFreepoint Tools
Freepoint tools are designed to measure torque and stretch in tubing, casings, and drill pipes to provide accurate free pipe indication. The Advanced Freepoint tool works in conjunction with the Warrior Logging System. The freepoint tool string consists of the following:
● Slack Joint (16”, 24”, or 36” stroke) ● Top Anchor (Magnet or Bowstring) Sensor ● Bottom Anchor (Magnet or Bowstring)
Please contact your sales representative for redress kits and pricing.
Part Number DescriptionAEL-FBS1001 FPT Upper Bowspring, 11/16inAEL-FBS1002 FPT Lower Bowspring, 11/16inAEL-FBS3001 FPT Bowspring, 1inAEL-FMG1001 Magnet, Upper Section 11/16inAEL-FMG1002 Magnet, Spacer Section, 11/16inAEL-FMG1003 Magnet, Lower Section, 11/16inAEL-FMG3001 Magnet, Upper Section, 1inAEL-FMG3002 Magnet, Spacer Section1inAEL-FMG3003 Magnet, Lower Section 1inAEL-FMG4001 Magnet FPT Upper 1-3/8inAEL-FMG4002 Magnet, FPT Spacer, 1-3/8inAEL-FMG4003 Magnet FPT Lower 1-3/8inAEL-FMG6001 FPT Upper Magnet, 1-5/8inAEL-FMG6002 FPT Magnet Spacer, 1-5/8in
FREEPOINT TOOLSPart Number DescriptionAEL-FMG6003 FPT Lower Magnet, 1-5/8inAEL-FPT1000 11/16in Freepoint Tool CompleteAEL-FPT3000 1in Freepoint Tool CompleteAEL-FPT3001 Freepoint Tool, 1in W/MagnetsAEL-FPT4000 1-3/8in Freepoint Tool CompleteAEL-FPT6000 1-5/8in Freepoint Tool CompleteAEL-FSJ1001 FPT Slack Joint, 11/16inAEL-FSJ3001 Slack Joint, 1inAEL-FSJ4001 Slackjoint, 1-3/8in x 16inAEL-FSJ6001 Slack Joint, 1-5/8in x 16inAEL-FSN1001 FPT Sensor, 11/16inAEL-FSN3001 FPT Sensor, 1inAEL-FSN6001 FPT Sensor, 1-5/8in
SPECIFICATIONSTemperature Rating 500°FPressure Rating 20,000 psiDiameter Range 1” to 1-3/8” O.D.Tool Length VariesAnchor Type Magnets or BowspringSensor Type Piston or BootSlack Joint Stroke 6” (24” and 36” available on 1-3/8” OD tool)Connections Gearhart “GO”
Page 222 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 223 Revised: July 24, 2020 2:05 PM
Part Number DescriptionsLoaded Gun Systems, Unconventional
Gun Assembly Service Type
Carrier OD SPF Phasing —
Loaded Energetics—
Loaded Charges P/N
(without EC2 Prefix)—
Total # Shots in Carrier
Total # Loaded ChargesDetonator Detonating Cord Booster
LG Loaded Gun X NN or XXXNN NN X or XX — X X X — NNXNNNN or
NNXNNNN-NN — NNN NNN
Service TypesA TCP-Two BoostersB WL-No Det, No BoosterC WL-One Det, No BoosterD WL-One Det, One BoosterE WL-No Det, One Booster
DetonatorX No DetonatorA DET-E-A85B DET-E-A96LC DET-E-A105D DET-E-A105/100E DET-E-A140F DET-E-A140SG DET-E-A161H DET-E-A140FI RJC 215J DET-E-A140-DM
BoosterX No BoosterA DT-BIDI-400B DT-0875-325
Carrier ODTwo digits representing carrier
OD (e.g., 31) or five digits representing carrier P/N plus two-digit OD (e.g., GIC31).
SPFTwo digits representing shot
density (shots per foot). For HF, “25” is the calculated
shot density equivalent to shots per foot.
Detonating CordX No DetcordA DET-40H212B DET-40H512C DET-40R211D DET-40R511E DET-60H212F DET-80H212G DET-80H312H DET-80P113I DET-80R111J DET-80R211K DET-80R311L DET-1000000-363M DET-A572017N DET-PT150O DET-PT165P DET-80R111AQ DET-80R211AR DET-80R311AS DET-80H212AT DET-80H312AU DET-PT250AV DET-0412-006AW DET-80H312AY DET-A580010
PhasingA 60°B 90°C 135° - 45°D 140° - 20°G 120°J 180°O 0°P 72°V 51.4°R Rotated
HF Cluster
Page 224 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
Part Number DescriptionsScalloped Gun Systems, Conventional
Gun Assembly Type Carrier OD SPF / SPM — Coded Load
Tube SizeCharge Family
P/N Code — Phasing Total # of Shots
GA Gun Assembly - StandardNN NN — NN NNX — X NNN
GM Gun Assembly - Metric
Carrier OD
Size Code1-9/16” 161-3/4” 175
2” 202-3/8” 232-1/2” 252-3/4” 272-7/8” 283-1/8” 313-3/8” 33
4” 404-1/2” 454-5/8 464-3/4” 47
5” 505-1/8” 516-3/4” 67
7” 70
Charge Family
Size Code1-9/16” 15A1-3/4” 17A
2” 20A2-3/8” 23A2-1/2” 25A2-3/4” 27A2-7/8” 28A3-1/8” 31B, 33A3-3/8” 33A, 33B
4” 40A4-1/2” 45A4-5/8” 46A, 46B4-3/4” 48K
5” 51A, 51B5-1/8” 51A, 51B6-3/4” 68K
7”70A, 70B, 70C, 70D,
70K
Phasing
Code PhaseA 60°B 90°C 135° - 45°D 140° - 20°G 120°J 180°O 0°P 72°
R90° + 45° 60° + 30°
51.4° + 25.7°
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 225 Revised: July 24, 2020 2:05 PM
Part Number DescriptionsShaped Charges
Explosive Charge
Gun Type— Carrier OD Case Type Explosive
Weight Charge Type Explosive TypeCode Description
EC1 Retrievable Tubing Gun
— NN X NN (g) N N2 Retrievable Casing Gun
Carrier OD
Size Code1-9/16” 151-3/4” 17
2” 202-3/8” 232-1/2” 252-3/4” 272-7/8” 283-1/8” 31, 333-3/8” 33
4” 404-1/2” 454-5/8” 464-3/4” 48
5” 515-1/8” 516-3/4” 68
7” 70
Charge Type
Represents the type of charge. Some
examples are: DP, XDP, BH, SBH, GH, and Equal Hole size
charges.
Explosive Type1 RDX2 HMX3 HNS
Case Type
Represents charge case properties, such as material, case size, case shape, or shot arrangement (in the
gun carrier). Used internally.
Page 226 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 2:05 PM
This page intentionally left blank
© 2020 GEODynamics, Inc. All rights reserved. Patents: www.perf.com/patents Page 227 Revised: July 24, 2020 1:30 PM
NomenclatureAbbreviations, Acronyms, and Terms
A - B - CAPI American Petroleum InstituteBH Big HoleBRT Ballistic Release ToolCCL Casing Collar Locator
D - E - FDP Deep Penetrating
DUB Dynamic UnderbalanceEH Entry Hole
EHD Entry Hole DiameterEUE External Upset End (tubing connection)
FLUID Fluid OnlyFLUID or DRY Fluid or Dry Gas
G - H - IGH Good HoleHD Heavy DutyHF HELLFire™
HMX Cyclotetramethylene TrinitramineHNS HexanitrosilbeneHP High Pressure
HPHF High Pressure, High FlowID Internal Diameter
ISO Internal Organization for StandardizationITPO Independent Third-Party Organization
J - K - LLEH Limited Entry HoleLH Left Hand (e.g., left-hand threads)
M - N - ONPT Non-Productive TimeOD Outer Diameter
P - Q - RPSA Plug/Shoot AdapterPYX Bis DinotropyridineQC Quick Change
RDX Cyclotrimethylene TrinitramineRF Safe Radio Frequency Safe
RH Right Hand (e.g., right-hand threads)RTG Retrievable Tubing Gun
S - T - USBH Super Big HoleSPF Shots Per FootSPM Shots Per MeterSQC Short Quick ChangeSTD StandardTCP Tubing-Conveyed PerforatingTHD Thread
V - W - XWL Wireline
WRT Wireline Release ToolXLS Extra Low SwellXDP Extreme Deep Perforating
Y - ZZTC Zero Tension Connector
SHAPED CHARGE PART NUMBER SUFFIXES-BF Basix™ Frac-C Multistring Casing-D Refrax™ Dual Casing
-LD Low Debris-LS Low Swell-R Refrax™ Dual Casing
-RC Connex® Reactive Charge-RC-LS Connex® Reactive Charge Low Swell
-RX Reactive Charge-SB SandIQ™-SC SandIQ™-SD SandIQ™-SE SandIQ™-SF SandIQ™-SG SandIQ™
Page 228 Patents: www.perf.com/patents © 2020 GEODynamics, Inc. All rights reserved.Revised: July 24, 2020 1:30 PM
This page intentionally left blank