OIL AND STAIN SPREADING MACHINE
FOR PARQUET PRODUCTION
COSMA SPREADING OIL AND STAIN
Cosma’s purpose-built machines spread the oil
and stain evenly across the surface of the wood.
The padbrush and cylindrical brush absorb any
excess material to ensure that the correct
amount is applied. Surface texture, desired color
and (protective) layer thickness play an
important role in achieving the required result.
For structured wooden floors, Cosma has
developed the padbrush which ensures that the
oil penetrates deep into the wood.
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
COSMA CYLINDRICAL & PAD BRUSHES
FOR PARQUET FINISHING MACHINES
In the production of products such as wooden
floors or stairs, oil is applied with a roller coater.
The pad and cylindrical brushes (made of a
combination of natural fibers and synthetic
filaments) spread the oil evenly over the surface.
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
COSMA PADBRUSHES FOR PARQUET
FINISHING MACHINES
Specially developed for spreading oil on
distressed wooden floorings. Due to the special
mix of nylon filaments and natural fibers the
padbrushes achieve a much better spreading
and penetration of the oil into the wood.
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTIONTraditional pads vs. Cosma padbrushes
THE ADVANTAGES
✓ Get an excellent and better-looking finish
on your wooden floorings and parquet
✓ Modular concept: you can add it to your
production line or replace your current unit
✓ The brushes assure an even finish allover
with just one-way through with the right
amount of oil, thus reducing oil waste
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
COST SAVING & SUSTAINABILITY
✓ Re-use the Cosma brushes over-and-over
with the Cosma Brush Cleaning unit
✓ Eliminate the purchase of replacement pads
✓ Reduce the large amount of garbage waste
caused by the used pads
✓ Padbrushes last up to 300 times longer than
traditional pads
✓ Less transport costs
✓ The cylindrical brushes and
padbrushes work also with
renewable natural fibers
from an agave plant whilst
traditional pads are
completely produced from
synthetic material
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
MAKE THE INVESTMENT TODAY AND
SAVE COSTS IN THE FUTURE!
Ask us about the full production line for
parquet and wooden floorings!
MACHINE
TECHNOLOGY
FOR PARQUET
PRODUCTION
ABOUT COSMA
Since 1948 Cosma – Borstelfabriek Holland has
been developing and manufacturing brushes for
the full range of industrial surface treatments for
wood, plastic and metal. Today, the third
generation is at the helm of this family business.
NOT JUST MACHINES, BRUSHES TOO
We offer a range of modular machines and
specialist brushes which can process any product
down to the finest detail. All our machines and
brushes can be customized to suit your specific
requirements. Contact us for more information.
C O NTACT I N FOR M ATION
C a l l u s : + 3 1 ( 0 ) 4 9 5 5 3 2 3 5 4
M a i l u s : i n f o @ c o s m a . n l
V i s i t u s :
C o s m a - B o r s t e l f a b r i e k H o l l a n d B V
F a h r e n h e i t s t r a a t 8 a
6 0 0 3 D C W e e r t - N L
www.cosma.nl